CARGADOR BATERIA 48VDC/220VAC 10A CON SISTEMA DESULFATADOR

Transcription

1 POWER INVERTER LIMITADA Address: Pje. Enrique Campino 763, La Florida Santiago - CHILE Tel: Website: ventas@powerinverter.cl INVERTER HIGH FREQUENCY CARGADOR BATERIA 48VDC/220VAC 10A CON SISTEMA DESULFATADOR 1 / 4

2 2 Specification: Model UBC UBC Charging Rate 10A 10A Recommended Battery Capacity AH AH Input Voltage 110VAC or 220VAC, 50-60HZ Charging Voltage 44.1V or adjust to battery's specification 58.8V or adjust to battery's specification Humidity 5-95% With package Altitude 3000m,Work normally High temperature ambient operating Low temperature ambient operating High temperature storage Low temperature storage +40 C,Features OK -20 C, Features OK +70 C,Work normally after recovery under normal temperature for 2 hours -40 C,Work normally after recovery under normal temperature for 2 hours Housing material Aluminum Cooling Fan cooling Charging mode Multi-stage (max 8)full automatic switch mode,(reverse) pulse charging Appropriated Battery 36V/48V lead acid battery,agm,agl,gel,vrla,sla,flooded,wet Lithium, Lipo battery (charging program is different) (no pulse charging) Dimensions 264*117*73mm Weight 2.05kg (incl box) Certification CE and RoHS 2 / 4

3 3 Main Features: 1. Compact & Delicate & Energy Saving - - Switch Mode Tech Small and light, as we adopt the switch mode technology or called Switching Power Su pply technology. Compared with traditional Linear Power technology, ours is more energy sa ving as more than 85% electric energy is transferred to battery chemical energy during charging process while traditional tech can only transfer 40%. The tech is suitable for all type s of lead acid batteries (wet,flooded, maintenance free, VRLA, AGL,AGM, GEL, etc) as wel l as lithium, lipo batteries. 2. Automatic - - MCU control MCU system is applied. The whole charging process is monitored. Multi- stage automatically proceeds. No need for manual interference. charging Automatically stops charging when the battery is full. You can leave the charger con nected to the battery infinitely without the risk of overcharging. Once the battery is fu ll, the charger monitors the battery s voltage intermittently. If battery s capacity decreases or volta ge drops under set level, the charger can start again to charge battery to its full. 3. Multi- stage charging- - full charge but never overcharge & save battery & save energy Max 8 stage: pre- charging, soft charging, main charging (bulk charging), secondary charging, high constant voltage charging (absorption charging), 3- minute test, Float charging, End maintenance charging. This way can well transfer electricity into battery according to battery s absorption ab ility. On the one hand, save energy; on the other hand, protect battery from over- charging, therefore less gassing less temperature rising. Float charging and End maintenance charging also help protect battery and prolong its lifetime. 4. Recover Battery Capacity- - Pulse & Reverse Pulse Tech Pulse and reverse pulse technology is applied. The charger generates pulse and reverse pulse to reduce battery s impedance, gassing and temperature rise, restore the sulfate into liquid to recover battery capacity, therefore to prolong its lifetime. Pulse charging also can help charge fast and fully. Pulse Charging might not be applicable to Lithium, Lip o, Li- ion battery, which need constant current to charge. 3 / 4

4 4 5. Digital Display & Indicator Our charger has 4- digital display. Digital display will show battery's charging voltage and current and error code and mor e information. Floating charging will have time count- down, so that user knows when battery can be ready. Indicator lights can be added and defined as requeste d. The display can be customized or re- defined. 6. More Protection Tester function: If battery has abnormal state, the charger will display error code and reminds User to check battery whether it is good or ba d. Polarity Protection: Prevents the output connection or short circui t. leads from sparking due to accidental reverse Overcharge and Over- voltage Protection: never worry about overcharging or over- voltage as charger automatically stops when battery reaches set voltage or curren t. Temperature Compensation: There is temperature sensor to monitor chargin g environmental or battery s temperature to tell MCU to adjust charging program for differ ent temperature accordingly. This function allows our charger to charge battery to its f ull in whatever climate and seasons. (This function needs to know battery s relative par ameter and so optional) Página 4

5 7. Customization We can change parameter to meet different applications. Make charger specificall y for your battery. 8. CE and RoHS We have CE and RoHS certificatio n. Página 5