Full-Automatic Microprocessor Controlled Battery Charger for 12V Lead Batteries.

Transcription

1 Full-Automatic Microprocessor Controlled Battery Charger for 12V Lead Batteries. I-7012 model equipped with new INTEC POWER XT3 technology achieves highly efficient charging and maintains optimum battery performance. Pulse-current charging method trims sulfate deposit off electrode plates extending battery life. ANEXUS Trading Co., Ltd. 1

2 Compact & Easy To Operate ANEXUS Trading Co., Ltd. 2

3 Wide Range of Application (For 12V Only) Battery Type Flood Type Maintenance free Marine deep cycle AGM Gel cell Application Cars, Trucks, Motorcycles, vans, RVs, ATVs and SUVs Boats, Trolling motors, Personal watercraft Lawn mowers, Farm equipment, Tractors High performance engine starting, Audio, Solar, Airplanes, Power Sport and Stand By Power Snowmobiles Etc. ANEXUS Trading Co., Ltd. 3

4 Outstanding Features Fully Automatic Charger Safe & Easy To Operate Switching Power Supply Compact & Potable Construction Intec Power XT3 Technology Regulates 4-Stage Charging Pulse Charging Decomposing sulfate deposit Built-In Battery Tester LED displays Battery & Charge status Maintenance Mode Restores Impaired Storage Function Reinforced Activation Mode Supplements Maintenance Mode Safety Features Assure Safe Operation ANEXUS Trading Co., Ltd. 4

5 Switching Power Supply Compact & Light Weight Construction. High (80%) AC-DC Power Conversion Rate. Pulse Current Decomposes Sulfate Deposit. Secures Stable Output Under Power (Grid) Variation. A switching-mode power supply, SMPS: An electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a source, like mains power, to a load, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switchingmode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Ideally, a switched-mode power supply dissipates no power. Switching regulators are used as replacements for linear regulators when higher efficiency, smaller size or lighter weight are required. ANEXUS Trading Co., Ltd. 5

6 Intec Power XT3 Technology Intec Power XT3 regulates the whole system under 4-stage charging platform. Uniquely formulated 2-step Constant Voltage Charging combined with Pulse Current charging restore the storage capacity through de-sulfating process. Upon completion of charging, it automatically switches to Auto Wake-up mode and maintain optimum battery condition. Stage 1: Constant Current (Check Battery Condition) Stage 2: Constant Voltage (14.4V~14.8V) Stage 3: Max Wattage (14.80V~16.0V) Stage 4: Constant Voltage Maintenance (14.4V~14.8V) ANEXUS Trading Co., Ltd. 6

7 Desulfation Pulse Current decomposes Sulfate deposit. It also slows Sulfating process on electrode plates. In combination with higher voltage charging, it restores storage capability of battery and extend the battery life (Ref. Maintenance Mode). What is Sulfation? For lead-acid battery, during use, small sulfate crystals form, but these are normal and not harmful. During prolonged charge deprivation, however, the amorphous lead sulfate converts to a stable crystalline that deposits on the negative plates. This leads to the development of large crystals, which reduce the battery s active material that is responsible for high capacity and low resistance. Sulfation also lowers charge acceptance. Sulfation charging will take longer because of elevated internal resistance. Sulfation Desulfation ANEXUS Trading Co., Ltd. 7

8 4-Stage Charging Curve Voltage (V) Current (A) ANEXUS Trading Co., Ltd. 8

9 Built-In Battery Tester Microprocessor diagnoses battery condition as well as charge status and automatically selects charging mode while displaying the status on the LED panel. Charge level is displayed on LED panel by 10% increment. Battery status and charging failures are referred to Error Code as below. Error Code Er0 Er1 Er2 Er3 Er4 Er5 System Error - Contact Technician Reverse polarity connection/insufficient battery voltage/ Loose terminal contact Short Cell/Overload charge Cell Failure/High level sulfation Overheating Damaged battery ANEXUS Trading Co., Ltd. 9

10 Maintenance Mode Excessively discharged (low voltage) or highly sulfated batteries will not be recharged under regular charging parameters (condition) - Ref. Er1/Er3. Maintenance Mode, being activated manually, enforces restoration process which reverts programmed charging. This mode is backed up by Reinforced Activation Mode referred in the following page. ANEXUS Trading Co., Ltd. 10

11 Reinforced Activation Mode This is a supplemental function for Maintenance Mode. It is manually activated when Maintenance Mode fails to restore normal charging function. Remarks: Maximum charging time with this mode should not exceed 30- minute. Restoration is limited for those batteries: * with physically damaged electrode(s). * with exceedingly contaminated electrolyte solution. * with insufficient electrolyte solution. * left over extended time period not in use. ANEXUS Trading Co., Ltd. 11

12 Comparison (1) Item Linear Type Battery AC Delco Battery Charger Appearance Metal Box, Bulky, Heavy Light, Compact with Cable Compartment Charging One Stage Multiple-Stage Charging, Fast Charging Power Efficiency 50% or Less Over 80% Safety Feature Battery Tester Other Features Application Limited None Limited Separate Charge for Different Types of Battery Over Charge, Short Circuit Protection Reverse Polarity Protection Diagnoses Battery Condition, Selects Charging Program for Different Types Of Battery. Prevents Over-Charge Programmable Functions, Includes Auto-Charge, Reinforce Activation (Desulfation), Multiple Battery Charge, Optimal Charging Universal Charger for all 12-Volt Battery Including Start-up, Deep Cycle, AGM, Maintenance-free, Gel Cell ANEXUS Trading Co., Ltd. 12

13 Sample Battery: 50Ah Maintenance-free Comparison (2) Resting Voltage after discharge: 12V (discharging current 8A, discharged to 10.5V) Specific Gravity: 1.14 Brand Model Charging Rate Charging Time (Hr) Specific Gravity aft. charge Voltage 20Min. after full charge Charging AC Delco I A 04: V 110% Schumacher Black & Decker WM- 6000A VEC- 1087CBD 10A 04: V 10A 03: V * Above is just for reference data and be no guarantee of charging performance. 100% 80% ANEXUS Trading Co., Ltd. 13

14 Safety Features Reverse-Polarity Protection Over-Charge Shutoff Short-Circuit Guard Electric Surge Protection Overheat Suppression Spark-Free clamps Protects the system from reverse-polarity connection. Shuts off the circuits at full charge. Short-Circuit protection is programmed. Surge protection device is equipped. Charging shuts off before the unit overheats. Generates no sparks at contact. ANEXUS Trading Co., Ltd. 14

15 SAFETY Certifications Chargers are tested and certified by CCS* *Compliance Certification Services Inc. US: UL-1236, UL listed E EUROPE: IEC /LVD/CE/CB JAPAN: PSE AUSTRARIA: RCM EMISSION US: FCC Part 15 EUROPE: CISPR-22/EMC ANEXUS Trading Co., Ltd. 15

16 Certificate - UL & FC ANEXUS Trading Co., Ltd. 16

17 Certificate - CE, CB and EMC ANEXUS Trading Co., Ltd. 17