Pneumatic cylinders Series P1J Compact cylinders. Catalogue PDE2561TCUK-ul December 2006
|
|
- Kerrie Moore
- 5 years ago
- Views:
Transcription
1 Pneumatic cylinders Series P1J Compact cylinders Catalogue PDE261TCUK-ul December 26
2 PDE261TCUK-ul Features Air Hydraulic Electro cylinder cylinder mechanical actuators Overload safe *** *** * Easy to limit force *** *** * Easy to vary speed *** *** * Speed *** ** ** Reliability *** *** *** Robustness *** *** * Installation cost *** * ** Ease of service *** ** * Safety in damp environments *** *** * Safety in explosive atmospheres *** *** * Safety risk with electrical installations *** *** * Risk of oil leak *** * *** Clean, hygienic *** ** * Standardised measurements *** *** * Service life *** *** * Hydraulic system required *** * *** Weight *** ** ** Purchase price *** ** * Power density ** *** * Noise level during operation ** *** ** High force for size ** *** * Positioning possibilities * *** *** Total energy consumption * ** *** Service interval * ** *** Compressor capacity required * *** *** * = good, **=average, ***=excellent Important Before attempting any external or internal work on the cylinder or any connected components, make sure the cylinder is vented and disconnect the air supply in order to ensure isolation of the air supply. Note All technical data in this catalogue are typical data only. Air quality is essential for maximum cylinder service life (see ISO 873). WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. SALE CONDITIONS The items described in this document are available for sale by, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions stated in Parker s standard terms and conditions of sale (copy available upon request).
3 PDE261TCUK-ul Contents Page Cylinder series P1J, general...4- Cylinder forces...6 Main data...7 Working medium, air quality...7 Material specification...7 Side load force diagram...7 Guide for selecting suitable tubing...8 Dimensions (mm)...1 Order key...11 Standard stroke length...11 Order codes double acting...12 Order codes single acting...13 Guide unit...14 Order codes double acting, guided...1 Combinations...16 Mountings Sensors...19 Connecting cables with one connector...2 Male connectors for connecting cables...2 Ready to use connecting cables with connectors at each end...2 Connection block Valvetronic
4 PDE261TCUK-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction piston rod seal. Magnetic piston as standard. P1J-G non rotating version. Scraper ring. Smooth barrel for strict hygienic requirements. Dovetail on three sides for mounting sensor as required. Single acting and double acting versions The P1J range of cylinders is intended for use in a wide range of applications. These cylinders are particularly suitable in applications such as packaging, the food industry and the textile industry. Careful design and high quality throughout ensure long, trouble free service life. The compact design, with through mounting holes that are countersunk and tapped at both ends, make the cylinders easy to mount, with or without mountings. They are available in diameters of 12, 2, 2, 32, 4, and 63 mm, with stroke lengths up to 1 mm. The single acting version is available in the same bore size as the double acting version and with stroke lengths up to mm. All cylinder types have magnetic pistons as standard, and are initially lubricated with our foodgrade grease. Reed switch and solid state sensors are available as accessories, and can be fitted in the dovetail slots on three of the sides of the cylinder body. External guide device The cylinder can be supplied with an external guide unit to prevent the piston from turning. It guides the piston rod and enables the cylinder to resist turning moments on the piston rod and/or transverse forces. The device consists of a substantial mounting plate and two guides that run along the sides of the cylinder in two bearingsupport guide sleeves. The plate has pre-drilled mounting holes to aid assembly. Options In addition to a large selection of standard cylinders, the P1J is available in several standard variants, such as custom stroke length, extended piston rods, double piston rods etc. Additionally, a complete range of sensor and mounting devices is available. 4
5 PDE261TCUK-ul Smooth external design There are no recesses or pockets in the end covers that could trap dirt or liquid, making cleaning simple and effective. Double acting Corrosion resistant Even the basic versions of the cylinders have good corrosion resistance through appropriate choice of materials and surface treatment, allowing them to be used in demanding environments. As the end face of the cylinders is not fully anodised in the standard version, extra anodising can be specified when ordering to provide extra corrosion protection. Piston sensing A complete range of sensors for piston sensing is available as accessories: both reed switch and solid state sensors are available. They are supplied with either a flying lead or with a cable plug connector, with a moulded cable. Double acting, through piston rod Mounting A range of mountings with appropriate surface finish is available as accessories. Variants In addition to the basic versions, P1J cylinders are available in several standard variants: Cylinders with non-standard stroke lengths Cylinders with extended piston rods Cylinders with through piston rod Cylinders with through, hollow piston rod Single-acting cylinders Cylinders with anodised end faces Cylinders with piston rod guides Single acting, spring return Double acting, guided piston rod
6 PDE261TCUK-ul Cylinder forces, double acting variants Cyl. bore/ Stroke Piston area Max theoretical force in N (bar) pist. rod mm cm 2 1, 2, 3, 4,, 6, 7, 8, 9, 1, 12/6 + 1, , /1 + 3, , /1 + 4, , /12 + 8, , / , , / , , / , , = Outward stroke - = Return stroke Note! Select a theoretical force -1% larger than the force required Cylinder forces single acting variants Indicated cylinder forces are theoretical and should be reduced according to the working conditions. Order code Single acting, Theoretical piston force at 6 bar + stroke Spring retraction Nmax Nmin Nmax Nmin P1J-S12SS P1J-S12SS P1J-S12SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S2SS P1J-S32SS P1J-S32SS P1J-S32SS P1J-S32SS P1J-S32SS P1J-S32SS P1J-S32SS P1J-S32SS Order code Theoretical piston force at 6 bar + stroke Spring retraction Nmax Nmin Nmax Nmin Single acting, P1J-S4SS P1J-S4SS P1J-S4SS P1J-S4SS P1J-S4SS P1J-S4SS P1J-S4SS P1J-S4SS P1J-SSS P1J-SSS P1J-SSS P1J-SSS P1J-SSS P1J-SSS P1J-SSS P1J-SSS P1J-S63SS P1J-S63SS P1J-S63SS P1J-S63SS P1J-S63SS P1J-S63SS P1J-S63SS P1J-S63SS
7 PDE261TCUK-ul Main data Cylinder Cylinder Piston rod Basic weight Guided weight Air Port designation Bore Area Diam. Area Thread at addition at addition con- thread (female) mm per 1 mm per 1 sumpstroke mm stroke stroke mm stroke tion mm cm 2 mm cm 2 kg kg kg kg Litre Double acting P1J-S 12 DS 12 1,13 6,28 M3,6,16 - -,139 1) M P1J-S 2 DS 2 3,14 1,78 M,13,3,17,33,38 1) M P1J-S 2 DS 2 4,91 1,78 M,1,3,21,38,633 1) M P1J-S 32 DS 32 8,4 12 1,13 M6,2,44,27,,1 1) G1/8 P1J-S 4 DS 4 12,6 12 1,13 M6,29,4,4,8,168 1) G1/8 P1J-S DS 19,6 16 2,1 M8,,7,6,8,261 1) G1/8 P1J-S 63 DS 63 31,2 16 2,1 M8,77,1 1,8,11,422 1) G1/8 Single acting P1J-S 12 SS 1 1,13 6,28 M3,6,16 - -,79 1) M P1J-S 2 SS 2 3,14 1,78 M,13,3,17,33,22 1) M P1J-S 2 SS 2 4,91 1,78 M,16,3,22,38,344 1) M P1J-S 32 SS 32 8,4 12 1,13 M6,21,44,28,,63 1) G1/8 P1J-S 4 SS 4 12,6 12 1,13 M6,3,4,41,8,882 1) G1/8 P1J-S SS 19,6 16 2,1 M8,2,7,67,8,1372 1) G1/8 P1J-S 63 SS 63 31,2 16 2,1 M8,8,1 1,11,11,2184 1) G1/8 1) Free air consumption per 1 mm stroke length for a double stroke at a pressure of 6 kpa (6 bar) Working medium, air quality Working medium Dry, filtered compressed air to ISO class Recommended air quality for cylinders For best possible service life and trouble-free operation, ISO quality class should be used. This means µm filter (standard filter) dew point +3 ºC for indoor operation (a lower dew point should be selected for outdoor operation) and oil concentration 1. mg oil/m 3, which is what a standard compressor with a standard filter gives. ISO quality classes Quality Pollution Water Oil class particle max con- max. press. max consize centration dew point centration (µm) (mg/m³) ( C) (mg/m³) 1,1,1-7, , , , Material specification Double and single-acting Piston rod Stainless steel, DIN X1 CrNiS 18 9 Piston rod seal Nitrile rubber, NBR Piston rod bearing, Ø2-Ø63 mm Multi-layer PTFE/bronze/steel Piston bearing, Ø2-Ø63 mm UHMWPE plastic A-cover, Ø12 mm Brass End cover Aluminium Locking ring, Ø12 mm Surface-finished steel O-ring, cover, Ø12 mm Nitrile rubber, NBR Barrel Anodised aluminium Piston, Ø12 mm Brass Piston, Ø2-Ø63 mm Aluminium Piston seal Nitrile rubber, NBR Return spring, Ø12 mm Stainless steel Return spring, Ø2-Ø63 mm Surface-treated steel Other data Working pressure Max. 1 bar Working temperature Max +8 C Min 2 C Prelubricated, further lubrication is not normally necessary. If additional lubrication is introduced it must be continued. Side load force diagram Permissible side loading as a function of piston rod extension. Side load [N] U T Ø, Ø63 Ø32, Ø4 Ø12 Ø2 Ø Piston rod extension [mm] 7
8 PDE261TCUK-ul Guide for selecting suitable tubing The selection of the correct size of tubing is often based on experience, with no great thought to optimizing energy efficiency and cylinder velocity. This is usually acceptable, but making a rough calculation can result in worthwhile economic gains. The following is the basic principle: 1. The primary line to the working valve could be over sized (this does not cause any extra air consumption and consequently does not create any extra costs in operation). 2. The tubes between the valve and the cylinder should, however, be optimized according to the principle that an insufficient bore throttles the flow and thus limits the cylinder speed, while an oversized pipe creates a dead volume which increases the air consumption and filling time. The chart below is intended to help when selecting the correct size of tube to use between the valve and the cylinder. The following prerequisites apply: The cylinder load should be about % of the theoretical force (= normal load). A lower load gives a higher velocity and vice versa. The tube size is selected as a function of the cylinder bore, the desired cylinder velocity and the tube length between the valve and the cylinder. If you want to use the capacity of the valve to its maximum, and obtain maximum speed, the tubing should be chosen so that they at least correspond with the equivalent restriction diameter (see description below), so that the tubing does not restrict the total flow. This means that a short tubing must have at least the equivalent restriction diameter. If the tubing is longer, choose it from the table below. Straight fittings should be chosen for highest flow rates. (Elbow and banjo fittings cause restriction.) 3 Ø Ø2 Ø16 Ø1 Ø8 Ø63 Ø Ø4 Ø32 Ø2 Ø2 Ø16 Ø1 Cylinder Ø [mm] Equivalent throttling bore 1) Tube ØOut./ØInt. [mm] /16 /1 /14 /13 /12 14/11 12/1 1/8 8/6 6/4 /3 4/2,7 Air flow Qn [Nl/min] ,2,,8 1,1 1, Cylinder speed [m/s] 4 Length of tubing [m] 1) The equivalent throttling bore is a long throttle (for example a tube) or a series of throttles (for example, through a valve) converted to a short throttle which gives a corresponding flow rate. This should not be confused with the orifice which is sometimes specified for valves. The value for the orifice does not normally take account of the fact that the valve contains a number of throttles. 2) Qn is a measure of the valve flow capacity, with flow measured in litre per minute (l/min) at 6 bar(e) supply pressure and 1 bar pressure drop across the valve. 8
9 PDE261TCUK-ul Example 1 : Which tube diameter should be used? A mm bore cylinder is to be operated at. m/s. The tube length between the valve and cylinder is 2 m. In the diagram we follow the line from mm bore to. m/s and get an equivalent throttling bore of approximately 4 mm. We continue out to the right in the chart and intersect the line for a 2 m tube between the curves for 4 mm (6/4 tube) and 6 mm(8/6 tube). This means that a 6/4 tube throttles the velocity somewhat, while an 8/6 tube is a little too large. We select the 8/6 tube to obtain full cylinder velocity. Example 2 : What cylinder velocity will be obtained? A 8 mm bore cylinder will be used, connected by 8 m 12/1 tube to a P2L-B valve. What cylinder velocity will we get? We refer to the diagram and follow the line from 8 mm tube length up to the curve for 12/1 tube. From there, we go horizontally to the curve for the Ø8 cylinder. We find that the velocity will be about. m/s. Example 3 : What is the minimum inner diameter and maximum lenght of tube? For a application a 12 mm bore cylinder will be used. Maximum velocity of piston rod is. m/s. The cylinder will be controlled by a P2L-D valve. What diameter of tube can be used and what is maximum lenght of tube. We refer to the diagram. We start at the left side of the diagram cylinder Ø12. We follow the line until the intersection with the velocity line of. m/s. From here we draw a horizontal line in the diagram. This line shows us we need an equivalent throttling bore of approximately 1 mm. Following this line horizontally we cross a few intersections. These intersections shows us the minimum inner diameter (rightside diagram) in combination with the maximum length of tube (bottomside diagram). For example: Intersection one: When a tube (14/11) will be used, the maximum length of tube is.7 meter. Intersection two: When a tube ( /13) will be used, the maximum length of tube is 3.7 meter. Intersection three: When a tube ( /14) will be used, the maximum length of tube is 6 meter. Valve series with respective flows in Nl/minute Valve series Qn in Nl/Min Valvetronic Solstar 33 Interface PS1 1 Valvetronic Interface 2 1 B2 Series 168 Adex A 173 Moduflex size 1, (2 x 3/2) Valvetronic PVL-B /3 closed centre, 6 mm push in 29 Moduflex size 1, (4/2) 32 B43 Manual and mechanical 34 Valvetronic PVL-B 2 x 2/3, 6 mm push in 3 Valvetronic PVL-B /3 closed centre, G1/8 37 Compact Isomax DX 38 Valvetronic PVL-B 2 x 3/2 G1/8 44 Valvetronic PVL-B /2, 6 mm push in 4 Valvetronic PVL-B /3 vented centre, 6 mm push in 4 Moduflex size 2, (2 x 3/2) 4 Flowstar P2V-A 2 Valvetronic PVL-B /3 vented centre, G1/8 4 Valvetronic PVL-B /2, G1/8 4 Valvetronic PVL-C 2 x 3/2, 8 mm push in 4 Adex A1 6 Valvetronic PVL-C 2 x 3/2 G1/8 7 Compact Isomax DX1 8 Valvetronic PVL-C /3 closed centre, 8 mm push in 7 Valvetronic PVL-C /3 vented centre, G1/4 7 VIKING P2L-A 76 B3 Series 78 Valvetronic PVL-C /3 closed centre, G1/4 78 Moduflex size 2, (4/2) 8 Valvetronic PVL-C /2, 8 mm push in 84 Valvetronic PVL-C /3 vented centre, 8 mm push in 84 Valvetronic PVL-C /2, G1/4 84 VIKING P2L-B 12 Flowstar P2V-B 19 ISOMAX DX1 11 B3 Manual and mechanical 116 B4 Series 117 Airline Isolator Valve VE22/ ISOMAX DX 33 VIKING P2L-D 88 ISOMAX DX3 4 Airline Isolator Valve VE42/43 2 Airline Isolator Valve VE82/ Example 4 : Determining tube size and cylinder velocity with a particular cylinder and valve? For an application using a 4 mm bore cylinder with a valve with Qn=8 Nl/min. The distance between the cylinder and valve has been set to m. Tube dimension: What tube bore should be selected to obtain the maximum cylinder velocity? Start at pipe length m, follow the line up to the intersection with 8 Nl/min. Select the next largest tube diameter, in this case Ø1/8 mm. Cylinder velocity: What maximum cylinder velocity will be obtained? Follow the line for 8 Nl/min to the left until it intersects with the line for the Ø4 mm cylinder. In this example, the speed is just above 1.1 m/s. 9
10 PDE261TCUK-ul Double and single acting cylinders l12 AF A*+ stroke AA** + stroke EE PL CAD drawings on the Internet Our home page includes the AirCad Drawing. Library with 2D and 3D drawings for the main versions. KF Through piston rod ØL ØM N O SW RR EA WH ZJ1* + stroke ZJ2** + stroke I BG WH + stroke Ø MM R E Guided cylinder SS TT ØU ØV Through piston rod S T Y Dimensions (mm) Z HH ZJ3 + stroke WH + stroke Cylinder bore A* AA** AF BG E EA EE HH I KF L l12 M MM N O PL 1, , M - 3, M3 3,4 3, 6,1 6 M4 1, 6, 2 31, , M 14,8, M,3 4, 9,2 1 M6 21, 6, 2 32, 47, , M 16,, M,3 4, 9,2 1 M6 22, 6, 3 32,6, , G1/8 1,7, M6,3, 9,2 12 M6 2, 1, 4 34, 2, , G1/8 17, 6, M6 6,9, 1, 12 M8 3, 1, 38, 6, , G1/8 19, 6, M8 6,9, 1, 16 M8 3, 1, 63 4, 6, , G1/8 2, 9, M8 9,3, 1, 16 M1 41, 1, ØX Cylinder bore R RR S SS SW T TT U V WH X Y Z ZJ1* ZJ2** ZJ , , , 4, 4,8 9,4 M4 1 42,8-2, , 4, 6, 9,4 M4 1 4, 6, 4, ,4,,7 9,4 M4 1 4, 63,, ,4, 7, 11, M 1 47, 6, 7, , 6, 7, 11, M6 12 3, 71, 6, , 9, 8, 14, M6 12 7, 77, 69, * A and ZJ1 = Double acting cylinders and single acting cylinders up to stroke length 3 mm ** AA and ZJ2 = Single acting cylinders, stroke length 31 to mm Length tolerances ±1 mm Stroke length tolerances +1./ mm 1
11 PDE261TCUK-ul Order key P 1 J S 3 2 D S 2 Cylinder bore mm Cylindertype/Function D Double-acting, Ø12 - Ø63 K Double-acting, through piston rod, Ø2 - Ø63 P Double-acting, through piston rod hollow, Ø2 - Ø63, Not cylinder version G S Single-acting, spring return for retract stroke, Ø12 - Ø63 Stroke length mm E.g. 2 = 2 mm For standard stroke length and max length see tabel below. Sealing material S Standard seals, -2 C to +8 C Stainless steel piston rod Magnetic piston Cylinder version S Standard cylinder K Cylinder with end cover in anodised aluminium. G Cylinder with mounted guide unit, Ø2 - Ø63. Standard stroke length Cylinder Cylinder Standard stroke length in mm designation bore * 3 4 * 8* 1* Double acting: P1J-S12D 1 P1J-S2D 2 P1J-S2D 2 P1J-S32D 3 P1J-S4D 4 P1J-SD P1J-S63D 63 Double acting with guide unit: P1J-G2D 2 P1J-G2D 2 P1J-G32D 3 P1J-G4D 4 P1J-GD P1J-G63D 63 Single acting: P1J-S12S 1 P1J-S2S 2 P1J-S2S 2 P1J-S32S 3 P1J-S4S 4 P1J-SS P1J-S63S 63 * Standard stroke length in mm according to ISO
12 PDE261TCUK-ul Data Working pressure Max. 1 bar Working temperature Max. +8 C Min. 2 C Double acting Cyl. bore Stroke Order code mm mm 12 P1J-S12DS- M thread 1 P1J-S12DS-1 1 P1J-S12DS-1 P1J-S12DS-2 P1J-S12DS-2 2 P1J-S2DS- M thread 1 P1J-S2DS-1 1 P1J-S2DS-1 P1J-S2DS-2 P1J-S2DS-2 3 P1J-S2DS-3 4 P1J-S2DS-4 P1J-S2DS- 2 P1J-S2DS- M thread 1 P1J-S2DS-1 1 P1J-S2DS-1 P1J-S2DS-2 P1J-S2DS-2 3 P1J-S2DS-3 4 P1J-S2DS-4 P1J-S2DS- 32 P1J-S32DS- G1/8 thread 1 P1J-S32DS-1 1 P1J-S32DS-1 P1J-S32DS-2 P1J-S32DS-2 3 P1J-S32DS-3 4 P1J-S32DS-4 P1J-S32DS- 8 P1J-S32DS-8 Double acting Cyl. bore Stroke Order code mm mm 4 P1J-S4DS- G1/8 thread 1 P1J-S4DS-1 1 P1J-S4DS-1 P1J-S4DS-2 P1J-S4DS-2 3 P1J-S4DS-3 4 P1J-S4DS-4 P1J-S4DS- 8 P1J-S4DS-8 P1J-SDS- G1/8 thread 1 P1J-SDS-1 1 P1J-SDS-1 P1J-SDS-2 P1J-SDS-2 3 P1J-SDS-3 4 P1J-SDS-4 P1J-SDS- 8 P1J-SDS-8 63 P1J-S63DS- G1/8 thread 1 P1J-S63DS-1 1 P1J-S63DS-1 P1J-S63DS-2 P1J-S63DS-2 3 P1J-S63DS-3 4 P1J-S63DS-4 P1J-S63DS- 8 P1J-S63DS-8 1 P1J-S63DS-1 12
13 PDE261TCUK-ul Data Working pressure Max. 1 bar Working temperature Max. +8 C Min. 2 C Single acting Cyl. bore Stroke Order code mm mm 12 P1J-S12SS- M thread 1 P1J-S12SS-1 1 P1J-S12SS-1 2 P1J-S2SS- M thread 1 P1J-S2SS-1 1 P1J-S2SS-1 P1J-S2SS-2 P1J-S2SS-2 3 P1J-S2SS-3 2 P1J-S2SS- M thread 1 P1J-S2SS-1 1 P1J-S2SS-1 P1J-S2SS-2 P1J-S2SS-2 3 P1J-S2SS-3 4 P1J-S2SS-4 P1J-S2SS- 32 P1J-S32SS- G1/8 thread 1 P1J-S32SS-1 1 P1J-S32SS-1 P1J-S32SS-2 P1J-S32SS-2 3 P1J-S32SS-3 4 P1J-S32SS-4 P1J-S32SS- Single acting Cyl. bore Stroke Order code mm mm 4 P1J-S4SS- G1/8 thread 1 P1J-S4SS-1 1 P1J-S4SS-1 P1J-S4SS-2 P1J-S4SS-2 3 P1J-S4SS-3 4 P1J-S4SS-4 P1J-S4SS- P1J-SSS- G1/8 thread 1 P1J-SSS-1 1 P1J-SSS-1 P1J-SSS-2 P1J-SSS-2 3 P1J-SSS-3 4 P1J-SSS-4 P1J-SSS- 63 P1J-S63SS- G1/8 thread 1 P1J-S63SS-1 1 P1J-S63SS-1 P1J-S63SS-2 P1J-S63SS-2 3 P1J-S63SS-3 4 P1J-S63SS-4 P1J-S63SS- 13
14 PDE261TCUK-ul Technical data Working medium Dry, filtered compressed air Working pressure Max. 1 bar Working temperature 2 C to +8 C Materials, external guide device Mounting plate Anodised aluminium Guides Stainless steel, DIN X 1 CrNiS 18 9 Sleeves Multi-layer, PTFE/bronze/steel Securing bolts Surface-finished steel Other data as for the basic cylinder. Guide unit The P1J cylinders can be fitted with an external guide unit to prevent the piston rod from turning. It guides the piston rod and enables the cylinder to resist turning torques on the piston rod and/or transverse forces. The device consists of a substantial mounting plate and twin guide rods that run in two support bearings. The mounting plate, which has pre-drilled mounting holes, is connected to the piston rod. The device is available for 2, 2, 32, 4, and 63 mm diameter cylinders, with stroke lengths from to 1 mm. Order codes on Pages 6 and 1. Permissible side loading Permissible side loading as a function of the load distance as shown below. Centre of gravity Distance Stroke Side load diagram Side load force [N] Ø63 Ø4, Ø Ø2, Ø2, Ø Distance [mm] Side load force [N] Permissible Torque Permissible torque as shown below as a function of the load distance as shown in the load figure above. Torque diagram Torque [Nm] 2, M V 1, 1, Ø63, Ø Ø4 Ø32 Ø2, Ø Distance [mm] 14
15 PDE261TCUK-ul Data Working pressure Max. 1 bar Working temperature Max. +8 C Min. 2 C Double acting, guided Cyl. bore Stroke Order code mm mm 2 P1J-G2DS- M thread 1 P1J-G2DS-1 1 P1J-G2DS-1 P1J-G2DS-2 P1J-G2DS-2 3 P1J-G2DS-3 4 P1J-G2DS-4 P1J-G2DS- 2 P1J-G2DS- M thread 1 P1J-G2DS-1 1 P1J-G2DS-1 P1J-G2DS-2 P1J-G2DS-2 3 P1J-G2DS-3 4 P1J-G2DS-4 M thread P1J-G2DS- 32 P1J-G32DS- G1/8 thread 1 P1J-G32DS-1 1 P1J-G32DS-1 P1J-G32DS-2 P1J-G32DS-2 3 P1J-G32DS-3 4 P1J-G32DS-4 P1J-G32DS- 8 P1J-G32DS-8 Double acting, guided Cyl. bore Stroke Order code mm mm 4 P1J-G4DS- G1/8 thread 1 P1J-G4DS-1 1 P1J-G4DS-1 P1J-G4DS-2 P1J-G4DS-2 3 P1J-G4DS-3 4 P1J-G4DS-4 P1J-G4DS- 8 P1J-G4DS-8 P1J-GDS- G1/8 thread 1 P1J-GDS-1 1 P1J-GDS-1 P1J-GDS-2 P1J-GDS-2 3 P1J-GDS-3 4 P1J-GDS-4 P1J-GDS- 8 P1J-GDS-8 63 P1J-G63DS- G1/8 thread 1 P1J-G63DS-1 1 P1J-G63DS-1 P1J-G63DS-2 P1J-G63DS-2 3 P1J-G63DS-3 4 P1J-G63DS-4 P1J-G63DS- 8 P1J-G63DS-8 1 P1J-G63DS-1 1
16 PDE261TCUK-ul Combinations Sensors Flange Flange P1J-cylinder Clevis Swivel rod eye Pin bolt Foot bracket 16
17 PDE261TCUK-ul Flange, MF1 Intended for fixed mounting of cylinder. This bracket can be fitted to front or rear end covers. Material: Bracket: Anodised aluminium Screws: Zinc plated steel 12,12 P1J-4DMB 2,31 P1J-4HMB 2,36 P1J-4JMB 3,2 P1J-4KMB 4,124 P1J-4LMB,11 P1J-4MMB 63,36 P1J-4NMB Cyl. A B C D E F G Ø mm mm mm mm mm mm mm mm A B 1, , 3,6 1 4,8 2 38, 24 8, 3,6 1 6, 2 4, , 4,6 1 6, 3 48, , 4,6 1 6, 4 63, , 6,6 2 9, 7, 9 12, 6,6 2 9, 63 8, , 8,6 2 12,7 ØE C D ØF G Foot bracket Intended for fixed mounting of cylinder. This bracket can be fitted to front or rear end covers. Material: Bracket: Anodised aluminium Screws: Zinc plated steel 1,1 P1J-4DMF 2,16 P1J-4HMF 2,34 P1J-4JMF 3,3 P1J-4KMF 4,6 P1J-4LMF,72 P1J-4MMF 63,178 P1J-4NMF Cyl. A1* A2** B1* B2** C1* C2** D E F G H I Ø mm mm mm mm mm mm mm mm mm mm mm mm mm 12 42, -, - 4,4-3, 12,7 17, , - 1, - 7, - 3, 12,7 22, , 63, 8, 73, 64, 79, 4, 16, 23, ,3 67,3 8,7 76,7 6,3 83,3 4, 16, 27, ,7 71,7 66, 84, 7,2 93,2 6, 19, 31, ,7 76,7 71, 89, 8,3 98,3 6, 19, 37, , 89, 88, 18, 99, 119, 8, 2,4 43, A + slagl. B + slagl. C + slagl. D E G H I F * Double acting cylinders and single acting cylinders up to stroke length 3 mm ** Single acting cylinders, stroke length 31 to mm 17
18 PDE261TCUK-ul Clevis According to ISO 814 Intended for articulated mounting of the cylinder. This mounting is adjustable in the axial direction, and is supplied complete with shaft. Intended for use with the pin bolt. Material: Zinc plated steel 2,11 P1J-4HRC 2,11 P1J-4HRC 3,22 P1A-4DRC 4,22 P1A-4DRC,4 P1A-4HRC 63,4 P1A-4HRC I±J Cyl. A B C D E F G H I J Ø mm mm mm mm mm mm mm mm mm mm 2 M 2, , 2 M 2, , 32 6 M6 3, , 4 6 M6 3, , 8 M8, , 63 8 M8, , B C G E F A D H D Swivel rod eye According to ISO 8139 Intended for articulated mounting of the cylinder. This mounting is adjustable in the axial direction. Material: Swivel rod eye: Zinc plated steel Swivel: tempered steel 1,8 P1J-4DRS 2,19 P1J-4HRS 2,19 P1J-4HRS 3,2 P1A-4DRS 4,2 P1A-4DRS,4 P1A-4HRS 63,4 P1A-4HRS A Cyl. A B C D E F G H I J L Ø mm mm mm mm mm mm mm mm mm mm mm 1 3 M3 1, , 4, 24,2 1, 2 M 2, , 7, 34, 1, 2 M 2, , 7, 34, 1, 3 6 M6 3, ,8 9, 38, 1, 4 6 M6 3, ,8 9, 38, 1, 8 M8, , 12, 49, 2, 63 8 M8, , 12, 49, 2, B C J±L G I E F H D Pin bolt Intended for securing to the piston rod. The bolt can be combined with the swivel mount or clevis mount. Material: Zinc plated steel 1,2 P1J-6DS 2, P1J-6HS 2, P1J-6HS 3,8 P1J-6KS 4,8 P1J-6KS,14 P1J-6MS 63,14 P1J-6MS Cyl. A B C D E Ø mm mm mm mm mm 1 1,, 1,6 1 M3 2, 8, 2, 2 M 2, 8, 2, 2 M 3 3, 1, 3, 2 M6 4 3, 1, 3, 2 M6 4, 13,, 2 M8 63 4, 13,, 2 M8 B A C D E 18
19 PDE261TCUK-ul P8S-DRFLX P8S-DPFLX P8S-DRSHX P8S-DPSHX Reed switch sensors These sensors are based on a thoroughly proven reed switch, suitable for use at a wide range of voltages. This, together with the compact size and simple dovetail mounting, makes these sensors suitable for a wide range of applications. They can interface with electronic control systems, relay systems or conventional valves. Technical data Specification P8S-DRFLX, 3 m P8S-DRSHX Type Reed switch Output Normally open Voltage range, P8S-DRFLX -11 VAC/VDC Voltage range, P8S-DRSHX -6 VAC/VDC Maximum voltage drop,8 V Maximum load current 38 ma Maximum interrupting capacity (resistive) 1 W Minimum activation distance 11 mm Repetition accuracy ±,1 mm Maximum operating frequency Hz Maximum response time 1 ms Protection class IP 67 Operating temperature range 1 C to +7 C Indication LED, red Material, sensor casing Polyamide Cable PVC 2x,2 mm 2 Cable including female connector PVC 3x,2 mm 2 Weight, sensor with 3 m cable g Weight, sensor with male connector 8 g Weight, cable with connector, 3 m 9 g Weight, cable with connector, m 146 g Weight, cable with connector, 1 m 286 g Fitting Dovetail Ordering data Output Cable Order code length Reed switch sensors Normally open 3 m* P8S-DRFLX Normally open ** P8S-DRSHX * Moulded cable ** Cable must be ordered separately. Electronic sensors The electronic sensors are solid state sensors with no moving parts, and include squelch and transient protection circuitry as standard. The integral electronics make these sensors suitable for use in applications with very high switching frequencies. Technical data Specification P8S-DPFLX, 3 m P8S-DPSHX Type Hall element Output PNP, N.O. Voltage range 1-28 VDC Maximum voltage drop 1 V Maximum load current See diagram below Maximum interrupting capacity (resistive) 12 W Minimum activation distance 12 mm Repetition accuracy ±,1 mm Maximum operating frequency 1 khz Maximum response time,1 ms Protection class IP 67 Operating temperature range 1 C to +7 C Indication LED, red Material, sensor casing Polyamide Cable PVC 2x,2 mm 2 Cable including female connector PVC 3x,2 mm 2 Weight, sensor with 3 m cable g Weight, sensor with male connector 8 g Weight, cable with connector, 3 m 9 g Weight, cable with connector, m 146 g Weight, cable with connector, 1 m 286 g Fitting Dovetail Ordering data Output Cable Order code length Electronic sensors PNP, NO 3 m* P8S-DPFLX PNP, NO ** P8S-DPSHX Maximum load current ma Symbols P8S-DRFLX Red P8S-DRSHX Brown Symbols P8S-DPFLX C P8S-DPSHX Red Brown Blue Blue Green Blue Black Blue 19
20 PDE261TCUK-ul Connecting cables with one connector The cables have an integral snap-in female connector. Type of cable Cable/connector Weight Order code kg Cables for sensors, complete with one female connector Cable, Flex PVC 3 m, 8 mm Snap-in connector, Cable, Flex PVC 1 m, 8 mm Snap-in connector, Cable, Super Flex PVC 3 m, 8 mm Snap-in connector, Cable, Super Flex PVC 1 m, 8 mm Snap-in connector, Cable, Polyurethane 3 m, 8 mm Snap-in connector, Cable, Polyurethane 1 m, 8 mm Snap-in connector, Cable, Polyurethane m, M12 screw connector, Cable, Polyurethane 1 m, M12 screw connector, Male connectors for connecting cables Cable connectors for producing your own connecting cables. The connectors can be quickly attached to the cable without special tools. Only the outer sheath of the cable is removed. The connectors are available for M8 and M12 screw connectors and meet protection class IP 6. Connector Weight Order code kg M8 screw connector,17 P8SCS83J M12 screw connector,22 P8SCS124J Ready to use connecting cables with connectors at each end As accessories the system comprises a large number of different cables in order to meet all requirements that may arise and to make the installation simple, fast and reliable. Cables with moulded 8 mm snap-in round contacts in both ends. The cables are available in two types, one with a straight male and female connectors respectively, and one with a straight 3-pole male connector in one end and an angled 3-pole female connector in the other end. Technical data Contacts Moulded 8 mm snap-in male/female contacts. Enclosure IP67 Cable Conductor 3x,2 mm 2 (32x,1 mm 2 ) Sheath PVC/PUR Colour Black Cables with straight 3-pole male and female connectors respectively. Cables with a straight 3-pole male connector in one end and an angled 3-pole female connector in the other end. Designation Weight Order code kg Cable with straight contacts,,2 m, Cable with straight contacts,,3 m, Cable with straight contacts,, m, Cable with straight contacts, 1, m, Cable with straight contacts, 2, m, Cable with straight contacts, 3, m, Cable with straight contacts,, m, Cable with straight contacts, 1 m, Designation Weight Order code kg Cable with straight and angled connectors,,2 m, Cable with straight and angled connectors,,3 m, Cable with straight and angled connectors,, m, Cable with straight and angled connectors, 1, m, Cable with straight and angled connectors, 2, m, Cable with straight and angled connectors, 3, m, Cable with straight and angled connectors,, m, Cable with straight and angled connectors, 1 m,
21 PDE261TCUK-ul Connection block Valvetronic 11 The Valvetronic 11 is a connection block that can be used for collecting signals from sensors at various points on a machine and connecting them to the control system via a multicore cable. Valvetronic 11 can also be used for central connection of the multi-core cable to the outputs of a control system, and can be laid to a machine where the output signals can be connected. The connection block has ten 8 mm snap-in circular connectors and a multi-core cable which is available in lengths of 3 or 1 m. The connections on the block are numbered from 1 to 1. Blanking plugs are available for unused connections, as labels for marking the connections of each block. Technical data Connections: Ten 3-pole numbered 8 mm round snap-in female contacts Input block Pin 1 Common, +24 VDC Pin 2 Input signal Pin 3 Common, V Output block Pin 1 Common, GND Pin 2 Output signal Pin 3 Common, V Electrical data: Voltage 4 VDC (max. 6 V AC/7 V DC) Insulation group according to DIN 11 class C Load max. 1 A per connection total max. 3 A Cable: Length 3 m or 1 m Type of cable LifYY11Y Conductor 12 Area.34 mm 2 Colour marking According to DIN 47 1 Ordering data Mechanical data Enclosure Temperature 2 C to +7 C IP 67, DIN 4 with fitted contacts and/or blanking plugs. Material Body PA 6,6 VD according to UL 94 Contact holder PBTP Snap-in ring LDPE Moulding mass Epoxy Seal NBR Screws Plated steel Industrial durability Good chemical and oil resistance. Tests should be performed in aggressive environments. Designation Weight Order code kg Connection block Valvetronic 11 with 3 m cable, Connection block Valvetronic 11 with 1 m cable, Blanking plugs (pack of 1), Use blanking plugs to close unused connections. Labels (pack of 1), White labels to insert in grooves on the side of the connection Dimensions and wiring diagrams A 18,7 12, M ,2 2, 3, L B 6 8 Conductor Colour Input Output 1 Pink Signal 1 Signal 1 2 Grey Signal 2 Signal 2 3 Yellow Signal 3 Signal 3 4 Green Signal 4 Signal 4 White Signal Signal 6 Red Signal 6 Signal 6 7 Black Signal 7 Signal 7 8 Violet Signal 8 Signal 8 9 Grey-Pink Signal 9 Signal 9 1 Red-Blue Signal 1 Signal 1 A Blue V V B Brown +24 V PE 21
22 PDE261TCUK-ul Notes 22
23
24 Parker Subject to Change
Pneumatic cylinders Compact cylinders Series P1J
Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction
Pneumatic cylinders Series P1J Compact cylinders. Catalogue PDE2561TCUK-ul December 2006
Pneumatic cylinders Series P1J Compact cylinders Catalogue PDE2561TCUK-ul December 2006 Features Air Hydraulic Electro cylinder cylinder mechanical actuators Overload safe *** *** * Easy to limit force
Pneumatic cylinders. Series P1J Compact cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic cylinders Series P1J Catalogue PDE2561TCUK June 2011 Features
Pneumatic cylinders. Series P5T Short Stroke Thrusters
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic cylinders Series P5T Short Stroke Thrusters Features Air
Pneumatic Cylinders Series P1A According to ISO 6432
Pneumatic Cylinders Series P1A According to ISO 6432 Catalogue 9127006842GB-ul Cylinders Aluminium anodised end caps. Magnet for proximity sensing. Low-friction piston rod seal. Stainless steel piston
Stainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
Pneumatic Cylinders. Series P1D-T Tie Rod Line - Ø32 to Ø320 mm According to ISO 15552
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Cylinders Series P1D-T Tie Rod Line - Ø32 to Ø320 According
Pneumatic Cylinders. Series P1A According to ISO 6432
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Series P1A According to ISO 6432 Catalogue PDE2564TCUK October
Pneumatic Cylinders. Series P1D - Ø32 to Ø125 mm According to ISO 15552
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Cylinders Series P1D - Ø32 to Ø125 mm According to ISO 15552
Pneumatic Cylinders. Series P1D - Ø32 to Ø125 mm According to ISO 15552
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Cylinders Series P1D - Ø32 to Ø125 mm According to ISO 15552
Pneumatic Valves Viking Lite Series. G1/8 - G3/8 body ported
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Valves Series G1/8 - G3/8 body ported Catalogue May 2015
Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic
atalog 0923/NA (10/01) Stainless steel piston rod. Low-friction piston rod seal. ouble and single-acting versions Smooth stainless steel cylinder tube. The Parker Pneumatic P1A range of cylinders is intended
Pneumatic cylinders Series P1D According to ISO, VDMA and AFNOR. Catalogue GB-ul
Pneumatic cylinders Series P1D According to ISO, VDMA and AFNOR Catalogue 9127007812GB-ul Contents page ISO cylinder family, P1D...3 P1D Standard... 4 P1D Clean... 6 P1D Flexible Porting... 8 P1D Tie-Rod...
P1A Pneumatic Mini ISO Cylinders
P1A Pneumatic Mini ISO Cylinders According to ISO 6432 The P1A range of cylinders is intended for use in a wide range of applications. The cylinders are particularly suitable for lighter duties in the
Stainless steel cylinders
P1S Stainless steel cylinders Ø 10-125 mm Stainless steel Pneumatic cylinders Series P1S ccording to ISO FLUIDTECHNIK OHEMI s. r. o. Olomoucká 87 tel : 548 213 233-235 CZ-627 00 rno fax : 548 213 238 http://www.fl
Stainless steel Pneumatic cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Stainless steel Pneumatic cylinders Series P1S ccording to ISO P1S
Stainless steel Pneumatic cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Stainless steel Pneumatic cylinders Series P1S ccording to ISO Catalogue
Stainless steel Pneumatic cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Stainless steel Pneumatic cylinders Series P1S ccording to ISO Catalogue
Pneumatic cylinders. Series P1M Compact cylinders
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic cylinders Series P1M Compact cylinders Cylinders Features
Pneumatic cylinders. Series P1D According to ISO, VDMA and AFNOR
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic cylinders Series P1D According to ISO, VDMA and AFNOR Catalogue
The cylinders are particularly suitable for lighter duties. High temperature. Low temperature. Packaging, food and textile industries.
ISO 643 Cylinders Description: Operating pressure: Operating temperature: Options: Applications: Advantages: Benefits: The cylinders are particularly suitable for lighter duties. Max 10 bar (145 psi).
1 0,1 0,1-70 0, , , , Cylinder bore <
Working medium, air quality Working medium: Dry, filtered compressed air to ISO 83-1 class 3.4.3. Recommended air quality for valves For best possible service life and trouble free operation, ISO 83-1
Handling Products. Comprising an innovative range of Grippers, Rotary Tables and Slide Tables
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Comprising an innovative range of Grippers, Rotary Tables and Slide
Push buttons and Visual indicators
Push buttons and Visual indicators Catalogue PDE2587TCUK December 2014 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
Pneumatic Cylinders. Series P1A According to ISO 6432
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Series P1A According to ISO 6432 Catalogue PDE2564TCUK-ul.
Short Build Pneumatic Cylinders P1M Series
Short Build Pneumatic Cylinders P1M Series Catalogue 9127007612GB-ul Cylinders Food approved grease. Integral air channels. Flexible porting options. Smooth exterior design. Integral low profile sensor
P1E Series ISO Cylinders
High fibre nitrile Combined cushion/ Aluminium tube to Zinc diecast end plates Retained cushion piston rod seal non return seal for give high strength on 32, & 50mm bore adjusting screw allows a and polyurethane
Pneumatic Cylinders. Series P1A - Ø10 to Ø25 mm According to ISO 6432
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Pneumatic Cylinders Series P1A - Ø10 to Ø25 According to ISO 6432 Catalogue
Standard cylinders DDPC, with measured-value transducer DADE
Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX
Air Motors. Series P1V-A
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Air otors Series Catalogue DE2555TCUK June 2011 Air otors Features
Pneumatic Cylinders. P1D Series. According to ISO, VDMA and AFNOR. P1D Series. PDE2612TCUK Linear Actuators
PDE2612TUK P1D Series Pneumatic ylinders P1D Series According to ISO, VDMA and AFNOR 53 Parker Hannifin orporation PDE2612TUK P1D Series ISO cylinder family, P1D A completely new cylinder range from the
ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
CPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
PS1 Modular Interface Valve
PS1 Modular Interface Valve May 2010 Important! Before carrying out any service work, ensure that the valve and manifold have been vented. Remove the primary supply air hose to ensure total dis of the
P1P Short Build Compact Cylinders
P1P Short Build Compact Cylinders According to ISO 21287 The P1P Series is a complete range of ISO 21287 compact cylinders developed to meet the highest requirements for quality and performance. The careful
V160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
INTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Ports: - double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread, 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Compact cylinders ADN-S, AEN-S
Compact cylinders ADN-S, AEN-S Compact cylinders ADN-S, AEN-S Key features At a glance Without sintered bearing Free of copper Improved operating behaviour Due to precise manufacturing from a single piece
ISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity
Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased
Our policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
Strokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
V230T. Mould Hydraulic Systems. Hydraulic cylinders - high temperature 230 bar V230T
V230T Mould Hydraulic Systems Hydraulic cylinders - high temperature 230 bar V230T V230Tcat.GB01-2006 Hydraulic cylinders-with tie rods 1 2 3 4 5 6 7 8 9 Chrome-plated steel rod, hardened or tempered and
RA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
INTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
RODLESS CYLINDER SERIES PU ACTUATORS
RODLESS CYLINDER SERIES PU 1 RODLESS CYLINDER SERIES PU RODLESS CYLINDER SERIES PU Series PU rodless cylinders have an internal strip for longitudinal tightness made of polyurethane (PU) with a harmonic
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Function Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
compact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Air Motors Series P1V-A
Air otors Series 1V-A Catalogue 9127007652GB-ul Air otors 1V-A Contents General General description...4-5 Design principles of motors... 6 Torque and power graphs... 6 Correction diagrams... 7 Speed regulation...
Viking Xtreme Valves. High reliability Few moving parts result in high reliability, rapid changeover and very long life.
Cable plugs and connectors are available in several variants. High electric protection class: IP65 or IP67. Smooth casing, suitable for food industry applications. High flow rate, long life. Terminal layout
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Standards NFE Max. particle size 50 µm. Pressure for determining piston forces. Materials:
Piston rod cylinders Short-stroke and compact cylinders 1 Standards NFE 49004 Compressed air connection Internal thread Ambient temperature min./max. -20 C / +80 C Medium temperature min./max. -20 C /
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
P1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
Compact cylinders CDC, ISO 21287, Clean Design
Key features Design Easy to clean Easy to assemble Versatile With the CDC (Clean Design Compact) cylinder series, the ADN modular system has been expanded to include an easy to clean compact cylinder variant
PRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
Rotary actuators Rack-and-pinion gears series TRR. Brochure
series TRR Brochure 2 Bosch Rexroth AG Pneumatics series TRR Rotary cylinder, Series TRR angle of rotation: 0-60 Ø2-00 mm with magnetic piston double piston with rack cushioning: pneumatically, adjustable
Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
Parallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
ISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
Proximity sensors SMT/SME-10, for C-slot
Proximity sensors SMT/SME-10, for C-slot Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For C-slot Standard Insertable in slot
ISO Cylinders. Features
Features Three versions of the Piston Rod Guidance modules are available. For standard applications, units with plain PTFE coated bearings are available but for more demanding applications with greater
Pneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432
Pneumatic cylinders, piston-ø 25 mm Single acting DIN ISO 6432 Technical data for series HE Order code HE-16-025 Series Piston-Ø Stroke length (mm) Design and function Single acting pneumatic cylinder
Standard cylinders DSBF-C, to ISO 15552, Clean Design
Key features At a glance Design Easy to clean Easy to mount Flexible DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1
ORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
SHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m
ISO/VDMA Series ISO 6431 and VDMA 24562 Line Cylinder Line ISO 6431 andcylinder VDMA 24562 w w w. n u m a t i c s. c o m Table of Contents ISO/VDMA Series Features and Benefits 3 How to Order 4 Technical
Compact cylinders ADVUL
Piston rod secured against rotation by means of guide rods and yoke plate Profile slots for proximity sensors Extensive range of accessories 2016/03 Subject to change Internet: www.festo.com/catalog/...
Vane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure: