l YZ-2R-A2 SPST (normally open) $8.05 l BZ-R-A2 Less differential travel l BZ-2R24-A2 Operating in temp. to

Transcription

1 Description l GSCA03S1 Safety hinge switch, 1-N.O. and 1-N.C., right $71.74 side hinge metal l GSCA03S3 Safety hinge switch, 1-N.O. and 1-N.C., left side hinge metal l GSDA03S1 Safety hinge switch, 1-N.O. and 1-N.C., right side hinge plastic l GSDA03S3 Safety hinge switch, 1-N.O. and 1-N.C., right side hinge plastic l GSEA44S1 Safety hinge switch, 2-N.O. and 2-N.C., right side hinge l GSEA44S3 Safety hinge switch, 2-N.O. and 2-N.C., left side hinge TYPE BZ, BA, WZ, YZ, BM AND BE STANDARD BASIC SWITCHES, SCREW TERMINAL PIN PLUNGER SPST 15 AMPS, 125, 250, 480 VAC CONTACTS l YZ-2R-A2 SPST (normally open) $8.05 l BZ-R-A2 Less differential travel l BZ-2R24-A2 in temp. to F (121 C) l BZ-2RT04 MIL-S-8805 application requirement (8805/1-004) l BZ-2R5551-A2 Dustproof and splash l BZ-2R55-A2-S Best service for sealed construction. Stainless steel internal snap spring PIN PLUNGER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2R-A2 Up to 20 amp load l BA-2R24-A2 in temperature to +250 F (121 C) PIN PLUNGER SPDT 22 AMPS, 125, 250, 480 VAC CONTACTS l BM-1R-A2 Up to 22 amp load PIN PLUNGER SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BE-2R-A4 Up to 25 amp load TYPE BZ/BA STANDARD BASIC SWITCHES This section covers over 100 of our most popular BZ/BA type Series catalogue listings. If you don t find what you re looking for, it s likely one of the approximately 1800 other active listings will meet your needs. UL Recognized. CSA Approved. Call Electro Sonic for your ordering information. BZ/BM TYPE SEALED TYPE BA/BE TYPE TYPE BZ, AND WA STANDARD BASIC SWITCHES, SOLDER TERMINALS PIN PLUNGER SPDT 15 AMPS, 125, 250, 240 VAC CONTACTS BZ-RX Manual reset (maintained contact) applications, solder terminal 7-9, 2-10*.005,.015* $18.36 PIN PLUNGER SPST-NC 20 AMPS, 125, 250, 277 VAC CONTACTS l WA-1RX-A4 Manual reset SPST-NC, A4 terminals 20, 25* *Reset characteristics. BZ/BM SEALED BA/BE TYPE BZ, BA, WZ, YZ, BM AND BE STANDARD BASIC SWITCHES, SCREW TERMINAL PIN PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2R72-A2 Applications requiring gold alloy contacts $12.84 PIN PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2R A2 Gold alloy contacts dustproof and splash PIN PLUNGER SPDT 5 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2R244-A2 in temp. to +400 F (204 C) for 100 hours PIN PLUNGER SPDT 10 AMPS, 125, 250, 480 VAC CONTACTS l BZ-R21-A2 Lower force PIN PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2R-A2 Most applications SPDT PIN PLUNGER SPST 15 AMPS, 125, 250, 480 VAC CONTACTS l WZ-2R-A2 SPST (normally closed) TYPE BZ, BM STANDARD BASIC SWITCHES, SCREW TERMINALS OVERTRAVEL PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RD72-A2 Applications requiring gold alloy contacts $20.58 OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RD-A2 Added overtravel. For manual operation and slow 20 (max) cam rise l BZ-2RD24-A2 in temperature to +250 F (121 C)

2 TYPE BZ STANDARD BASIC SWITCHES, SCREW TERMINALS OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RS5551-A2 Dustproof and splash $16.71 DUSTPROOF AND SPLASH RESISTANT DUSTPROOF AND SPLASH RESISTANT TYPE BZ, BA, AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS OVERTRAVEL PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RDS A2 Applications requiring gold alloy contacts plus dustproof and splash $39.67 OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RDS5551-A2 Dustproof and splash OVERTRAVEL PLUNGER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2RB-A2 Up to 20 amp load OVERTRAVEL PLUNGER SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BE-2RB-A4 Up to 25 amp load TYPE BZ STANDARD BASIC SWITCHES, SCREW TERMINALS OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RQ-A2 Added overtravel. For manual $16.82 in-line operation and for slow 30 (max) rise cams l BZ-2RQ24-A2 in temperature to ±250 F (121 C) BZ/BM TYPE BA TYPE TYPE BZ, BA AND BM STANDARD BASIC SWITCHES, SCREW TERMINALS OVERTRAVEL PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RS72-A2 Applications requiring gold alloy contacts $19.86 OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RS-A2 Added overtravel. For in-line operation and with JR auxiliary actuators BZ-RSX Manual reset solder terminals OVERTRAVEL PLUNGER SPDT 22 AMPS, 125, 250, 480 VAC CONTACTS l BM-1RS-A2 Up to 22 amp load Handling BA BZ/BM THREADED BUSHINGS ARE 15/32-32NS TYPE BZ, BA, AND BM STANDARD BASIC SWITCHES, SCREW TERMINALS Force Min. (oz.) Inches OVERTRAVEL PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RQ172-A2 Applications requiring $27.29 gold alloy contacts OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RQ1-A2 BZ-2RQ-A2 type applications with panel mount l BZ-2RQ1T04 MIL-S-8805 application requirements (M8805/1-020) l BZ-2RQ124-A2 in temperature to ±250 F (121 C) l BZ-2RN702 Furnished with unassembled seal boot BZ-RQ1X Manual reset. Solder terminals OVERTRAVEL PLUNGER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2RQ1-A2 Up to 20 amp load OVERTRAVEL PLUNGER SPDT 22 AMPS, 125, 250, 480 VAC CONTACTS l BM-1RQ1-A2 Up to 22 amp load

3 BZ-2RQ181-A2 BZ/BM BA BZ-24Q181-A2 THREADED BUSHINGS ARE 15/32-32 NS TYPE BZ, BM, STANDARD BASIC SWITCHES, SCREW TERMINALS Recommended For OVERTRAVEL PLUNGER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RQ1872-A2 Applications requiring gold alloy contacts $39.92 OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RQ18-A2 Added overtravel Roller plunger for rapid cam (30 max) rise and slide operation. Panel mount l BZ-2RQ1824-A2 in temperature to ±250 F (121 C) OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2AQ18T1 Double-break circuitry OVERTRAVEL PLUNGER SPDT 22 AMPS, 125, 250, 480 VAC CONTACTS l BM-1RQ18-A2 Up to 22 amp load OVERTRAVEL PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RQ181-A2 Applications requiring roller plunger 90 to major axis of switch BZ/BM TYPE BZ-2RM-A2 BA TYPE ADJUSTABLE ADJUSTABLE BZ-2RM-A2 TYPE BZ, BA, BM, AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS STRAIGHT LEVER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RW8072-A2 Applications requiring $16.09 gold alloy contacts l BZ-2RW A2 Best stability under varying humidity. Gold alloy contacts with seal STRAIGHT LEVER SPDT 5 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW8244-A2 in temp. to +400 F (204 C) for 100 hours STRAIGHT LEVER SPDT 10 AMPS, 125, 250, 480 VAC CONTACTS l BZ-RW8435-A2 Lowest operating force (without external return spring) STRAIGHT LEVER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW876T 1.25 inch lever requirements l BZ-2RW80-A2 2.5 inch lever requirements l BZ-2RW84-A2 Lower force (without external return spring) l BZ-2RW A2 Dustproof and splash l BZ-2RWT04 MIL-S application requirements (M8805/1-044) l BZ-2RW824-A2 in temperature to +250 F (121 C) BZ-RW80X Manual reset. Solder terminals l BZ-2RW863-A2 6 inch lever requirements STRAIGHT LEVER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2RV-A2 Up to 20 amp load STRAIGHT LEVER SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BE-2RV-A4 Up to 25 amp load STRIAGHT LEVER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW899-A2 Adjustable operation point (17mm to 22mm).670 to.880 l BZ-2RM-A2 Reverse acting actuator (switch plunger depressed in free position

4 TYPE BZ STANDARD BASIC SWITCHES, SCREW TERMINALS SIMULATED ROLLER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW80147-A inch (26.7mm) $14.18 (simulated roller) lever applications l BZ-2RW80196-A inch (48.3mm) (simulated roller) lever applications TYPE BZ, BA, BM AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS ROLLER LEVER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW822-A inch (26.7mm) $13.77 (steel roller) lever applications l BZ-2RW8222-A2 Roller turned max l BZ-2RW82224-A2 in temperature to +250 F (121 C) l BZ-2RW A2 Dustproof and splash l BZ-2RW82255-A2-S Best service for sealed construction. Stainless steel internal snap spring ROLLER LEVER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2RV22-A2 Up to 20 amp load ROLLER LEVER SPDT 22 AMPS, 125, 250, 480 VAC CONTACTS l BM-1RW822-A2 Up to 22 amp load ROLLER LEVER-SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BE-2RV22-A4 Up to 25 amp load ROLLER LEVER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW82299-A2 Adjustable operating point. Roller lever 1.05 inch (26.7mm) l BZ-2RW8299-A2 Adjustable operating point. Roller lever 1.90 inch (48.3mm) BZ/BM TYPE BA/BE TYPE ADJUSTABLE BZ/BM TYPE BA/BE TYPE BZ/BM TYPE BA/BE TYPE BZ-RW922-A2 BZ-2RW826-A2 BZ-2RW825-A2 ADJUSTABLE TYPE BZ, BA, BM AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS ROLLER LEVEL SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RW82272-A2 Applications requiring $17.23 gold alloy contacts l BZ-2RW A2 Applications requiring gold alloy contacts plus dustproof and splash BZ-RW922-A2 BZ/BM TYPE BA/BE TYPE Continued on next page

5 TYPE BZ, BA, BM AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS ROLLER LEVER SPDT 1 AMPS, 125 VAC CONTACTS l BZ-2RW A2 Applications requiring gold alloy contacts, plus dustproof, and splash $27.18 ROLLER LEVER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW82-A inch (48.3mm) (steel roller) lever applications l BZ-2RW A2 Dustproof and splash ROLLER LEVER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2RV2-A2 Up to 20 amp load ROLLER LEVER SPDT 22 AMPS, 125, 250, 480 VAC CONTACTS l BM-1RW82-A2 Upt to 22 amp load ROLLER LEVER SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BE-2RV2-A4 Up to 25 amp load ROLLER LEVER SPDT 10 AMPS, 125, 250, 480 VAC CONTACTS l BZ-RW922-A2 Best repeatability and O.P. stability ROLLER LEVER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RW826-A2 One-way roller (9.4mm mm).37 dia. 15 wide roller l BZ-2RW825-A2 One-way roller (4.83mm 4.83mm).19 dia. 19 wide roller BZ TYPE BA/BE TYPE BZ TYPE BA/BE TYPE TYPE BZ, BA, AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS FLEXIBLE ROLLER LEAF SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RL2-A2 Force and stability of the $12.74 flexible leaf with roller l BZ-2RL2T04 MIL-S-8805 application requirements FLEXIBLE ROLLER LEAF SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l BA-2RL2-A2 Up to 20 amp load TYPE BZ/BA SERIES SPECIAL CIRCUITRY SWITCHES Special sequence switches provide unusual circuit control. A make-beforebreak switch provides circuit continuity while switching from N.C. to N.O. In another Make-before-make switch, upon actuation, one circuit is made an interval before the second circuit. Another switch provides a single pulse or momentary closure of the contacts with each cycle of operation. Double break versions can interrupt greater inductive loads and feature shorting bar construction. A split contact version allows control of the two isolated circuits. BZ TYPE BA/BE TYPE BZ TYPE BA/BE TYPE TYPE BZ, BA, AND BE STANDARD BASIC SWITCHES, SCREW TERMINALS FLEXIBLE LEAF SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2RL-A2 Force and stability of the $12.43 flexible leaf actuator l BZ-2RL5551-A2 Dustproof and splash l BZ-2RLT04 MIL-S-8805 application requirements (M8805/1-001) BZ-2RL24-A2 in temperature to +250 F (121 C) BZ-RLX Manual reset. Solder * terminal FLEXIBLE LEAF SPDT 20 AMPS 125, 250, 480 VAC CONTACTS l BA-2RL-A2 Up to 20 amp load FLEXIBLE LEAF SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BE-2RL-A4 Up to 25 amp load *Reset characteristics. TYPE BZ/BA STANDARD BASIC SWITCHES, SCREW TERMINALS PIN PLUNGER SPDT 10 AMPS, 125, 250, 480 VAC CONTACTS l BZ-2G-A2 Make-before-break contact action 20 max..005 $20.58 PIN PLUNGER SPDT 20 AMPS, 125, 250, 480 VAC CONTACTS l 10BS Adjustable differential travel at max. setting 526

6 TYPE BZ/BA STANDARD BASIC SWITCHES, SCREW TERMINALS PIN PLUNGER SPDT 15 AMPS, 125, 250, 480 VAC CONTACTS l BZ-3AT Double-break, low $19.34 voltage DC applications l BZ-2AW82T Same as above, but with 1.9 inch roller lever l BZ-2AW822T Same as above, but with 1.05 inch roller lever PIN PLUNGER SPDT 25 AMPS, 125, 250, 480 VAC CONTACTS l BA-3ST Double-break, low voltage DC applications PIN PLUNGER SPDT 5 AMPS, 250 VAC CONTACTS l BZ-3YT MIL-S-8805 application requirements. (split contact) l BZ-3YWT82 Same as above, but with 1.9 inch roller lever l BZ-3YWT822 Same as above, but with 1.05 inch roller lever Use With Switch Min. (in.) Position (in.) ROLLER LEVER FOR S PLUNGER TYPE BZ AND DT SWITCHES ONLY. PERMITS CAM OPERATION l JR BZ, DT ±.125 $45.65 ADJUSTABLE ROLLER LEVER. TANG ON TOP OF ACTUATOR CAN BE BENT TO ADJUST O.P. AND F.P. l AD5721R BZ, BM.437 approx l ADA3721R BA, BE.375 approx approx l ADD3721R DT.375 approx approx STRAIGHT PLUNGER, PANEL MOUNT l MC2711 BZ, BM l MCA2711 BA, BE l MCD2711 DT NOTE: Switches shown are not included with the actuator. All actuators are for use with pin plunger types only, except cat. no. JR. MC2711H MDH3211Q AD5721R JR MC2711 BASIC SWITCH AUXILIARY ACTUATORS Auxiliary actuators adapt the plunger-type standard basic switch to many applications needs. Auxiliary actuators minimize the need for a large inventory of switch types. Actuators and switches are sold as separate items and must be ordered separately. Mounting hardware is furnished with the actuator. FEA- TURES: Additional overtravel. Quick, easy installation. Corrosion resistance. MD3211Q1 Use With Switch Min. (in.) Position (in.) MC7711 SEALED STRAIGHT PLUNGER. PANEL MOUNT. ELASTOMETER SEAL BOOT KEEPS OUT LIQUID SPLASH AND DIRT. FURNISHED UNASSEMBLED l MC2711H BZ, BM $45.65 l MCA2711H BA, BE ± l MCD2711H DT ROLLER PLUNGER. PANEL MOUNT. ROLLER PARALLEL TO LONG AXIS OF THE SWITCH l MDA3711Q BA, BE l MD3211Q DT HIGH OVERTRAVEL PLUNGER. PANEL MOUNT l MC7711 BZ, BM l MCA7711 BA, BE l MCD7711 DT NOTE: Switches shown are not included with the actuator. All actuators are for use with pin plunger types only, except cat. no. JR. 527

7 PA1 3PA2 TYPE 3PA BASIC SWITCH TERMINAL ENCLOSURES Type 3PA die cast aluminum enclosures protect the switch from physical abuse, while providing protection for personnel from exposed terminals. Will accept any of the standard basic switches, Z, A, M etc. The 3PA1 can be mounted from either side through.140 dia. holes on 1 centres. 3PA2 is flange mounted by means of two dia. holes in the bottom flange. TYPE 3PA ENCLOSURES Cat. No. Variation DIE CAST ALUMINUM ENCLOSURES 3PA1 Side mount $ PA2 Bottom mount NOTE: ENCLOSURE PRICES DO NOT INCLUDE SWITCHES BASIC SWITCH MOUNTING BRACKET Type 8MA adjustable mounting brackets can regulate the operation point of a basic switch up to.080 (2mm) by loosening the locking screw, inserting a screwdriver in the adjusting slot, and twisting. Sturdy, cadmium-plated steel construction. Can be used with all standard basic switches. TYPE 8MA ADJUSTABLE MOUNTING BRACKET Cat. No. Has Adjustment Slot CADMIUM-PLATED STEEL l 8MA1 On the left $16.51 l 8MA2 On the right MA1-B PA MA1-B WITH SWITCH ASSEMBLED 17MA1-B CONVERSION MOUNTING BRACKET This sturdy corrosion resistant conversion mounting bracket snaps into basic switch mounting holes without the use of tools. Fits all standard basic switches with mounting holes on 1 centres. Brackets and switches must be ordered separately PA2 Cat. No. For use with switch type CONVERSION MOUNTING BRACKET l 17MA1-B Z, A, M, E, DT etc. $ NOTE: BRACKET PRICES DO NOT INCLUDE SWITCHES PA3 TYPE 5PA PLASTIC TERMINAL ENCLOSURES 5PA Series plastic terminal enclosures prevent personnel from coming in contact with exposed switch terminals, and protects the switch terminals against shorting or grounding. 5PA1 will accept any basic switch, ( Z, A, M ) with solder terminals. 5PA2 will accept any basic switch, ( Z, A, M ) with screw terminals. 5PA3 will accept any basic switch, ( Z, A, M ) with either screw or solder terminals, which has been assembled in an auxiliary actuator. TYPE 5PA ENCLOSURES Cat. No. Will Fit Basic Switch PLASTIC TERMINAL ENCLOSURES l 5PA1 With solder terminals $1.50 l 5PA2 With screw terminals 1.34 l 5PA3 With auxiliary actuators 9.54 NOTE: ENCLOSURE PRICES DO NOT INCLUDE SWITCHES 8MA1 8MA1 WITH SWITCH ASSEMBLED DIA 12MA1 WITH BASIC SWITCH 12MA5 TYPE 12MA AUXILIARY ACTUATORS The type 12MA actuators fit all pin plunger basic switches, Z, A, M as well as type TB two and four-circuit switches. Actuators are available with either 1 2 or 1 diameter buttons, in a choice of colours (black or red). Switch mounting holes and actuator mounting bushings are adjustable to allow the switch to be mounted for best button travel with panel thicknesses from.060 to.312. Actuators and switches must be ordered separately. TYPE 12MA ACTUATORS Cat. No. Button Dia. Button Colour 1 2 PUSHBUTTON ACTUATORS l 12MA1 1 2 Black $90.46 l 12MA2 1 2 Red PUSHBUTTON ACTUATORS l 12MA5 1 Black l 12MA6 1 Red l 12MA7 1 Green NOTE: ACTUATOR PRICES DO NOT INCLUDE SWITCHES 528

8 DT-2R-A7 DT-2RS1-A7 DT-2RV216-A7 DT-2RV22-A7 DT-2R12-A7 DT-2RV3-A7 DT-2RV-A7 DT-2RV23-A7 DT-2RV2-A7 DT-2R-A7 DT-2RV216-A7 DT-2RV22-A7 D7-2RS1-A7 DT-2R212-A7 DT-2RV23-A7 DF2RV3-A7 DT-2RV-A7 TYPE DT STANDARD BASIC SWITCHES Two independent single-pole double-throw circuits on one housing. Design permitting several wiring combinations. Savings in space and weight. Mounting interchangeability with type Z switches. Temperature tolerance to F (82 C). UL recognized, CSA certified. TYPE DT STANDARD BASIC SWITCHES, SCREW TERMINALS PIN PLUNGER-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2R-A $79.23 STRAIGHT LEVER REVERSED LEVER POSITION-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV3-A STRAIGHT LEVER-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV-A DT-2RV2-A7 TYPE DT STANDARD BASIC SWITCHES, SCREW TERMINALS ROLLER LEVER (CENTERED STEEL ROLLER)-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV216-A $ (26.2MM) ROLLER LEVER (STEEL ROLLER)-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV22-A ROLLER LEVER REVERSED LEVER POSITION-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV212-A ROLLER LEVER (CENTERED STEEL ROLLER)-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV23-A (48.3MM) ROLLER LEVER (STEEL ROLLER)-DPDT 10 AMPS, 125 OR 250 VAC CONTACTS DT-2RV2-A

9 STYLE 1 STYLE 2 STYLE 5 STYLE 3 STYLE 4 STYLE 6 DOOR TYPE BASIC SWITCHES Automatically cut power when service door or drawer is open, helping protect personnel and equipment. Enables circuit testing with power On by manually pulling rod actuator to maintained-on position. (Closing door or drawer switch.) Basic switches are component recognized by UL to UL1054 special use switches. STYLE 7 STYLE 8 DOOR TYPE BASIC SWITCHES WITH HIGH STRENGTH THERMOPLASTIC ROD ACTUATORS Style No. Basic Switch Position (In.) Depressed Position (In.) SPDT-5 AMPS, 125 OR 250, VAC CONTACTS. FOUR SPDT CKTS. (MS ) 8AC9 2 SM (4) $ SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. l 22AC1 6 V SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OF ACTUATOR ROD. l 22AC2 6 V SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OF ACTUATOR ROD. l 23AC2 7 V SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TWO SPDT CKTS. l 24AC1 8 V3 (2) SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OF ACTUATOR ROD. TWO SPDT CKTS. (MS ) l 4AC54** 8 V3 (2) SPDT-15 AMPS, 125 OR 250, VAC CONTACTS. TAPPED HOLE IN END OF ACTUATOR ROD. TWO SPDT CKTS. (MS ) l 4AC55 8 V3 (2) Style No. Basic Switch Position (In.) Depressed Position (In.) Temp. Ratings SPDT-15 AMPS, 125, 250, 480 VAC CONTACTS l 1AC2 1 BZ F to +180 F $57.15 SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. FOUR SPDT CKTS. 8AC1 2 SM (4) F to +180 F SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. THREE 6-FOOT LEADS. SEALED BASIC SWITCHES 9AC4 3 SE F to +221 F SPDT-15 AMPS, 125 OR 250 VAC CONTACTS. CAN BE RESET WITHOUT MOMENTARY CKT. BREAK. l 13AC1 4 V F to +300 F SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. MINIATURE SIZE. 17AC1-T 5 SM F to +250 F SPDT-5 AMPS, 125 OR 250 VAC CONTACTS. MINIATURE SIZE. (MS ) 17AC18-T* 5 SM F to +250 F SPDT-15 AMPS, 125 OR 250 VAC CONTACTS. TAPPED HOLE IN END OF ACTUATOR ROD. (MS ) l 2AC59* 6 V F to +185 F *These are military approved listings and the temperature range shown is for the finished product. All otherlistings are not military approved and the temperature range shown is the range for the basic switch only. MOMENTARY ACTION BULLET NOSE PLUNGER (SPDT SHOWN) PUSH-PULL FINGER GRIP PLUNGER (DPDT SHOWN) ALTERNATE ACTION BULLET NOSE PLUNGER (DPDT SHOWN) PULL-TO-CHEAT FINGER GRIP PLUNGER WITH FLAT TIP (SPDT SHOWN) STYLE 2 STYLE 6 2DM PANEL HOLE DETAIL 1DM/1DP PANEL HOLE DETAIL SNAP-IN PANEL MOUNT BASIC SWITCHES Attractive, rugged snap-in panel mount design easy installation. Choice of momentary, alternate push-pull and pull-to-cheat operation. Quick-conntect terminals. Expected machanical life: 1 million operations, 95% survival. Temperature range: 35 to +180 F (-3.7 to 82 C). UL recognized, CSA certified. DM Series Electrical Rating: 10 amps, 125, 250 or 277 VAC. DP Series Electrical Rating: 14 amps, 125, or 250 VAC. Continued on next page

10 DM SERIES Type/Colour Faceplate Colour Position (In.) Max. (In.) SPDT, MOMENTARY l 1DM1 Bullet nose/white White.750± $4.23 SPNC, MOMENTARY l 1DM2 Bullet nose/white White.750± SPNO, MOMENTARY l 1DM3 Bullet nose/white White.750± SPDT, MOMENTARY l 1DM18 Concave/Black Grey l 1DM21 Concave/White White.355± SPDT, PUSH-PULL l 1DM301 Finger grip/black Grey SPDT, PULL-TO-CHEAT l 1DM401** Finger grip/white White DPDT, MOMENTARY l 2DM1 Bullet nose/black Black.770± l 2DM6 Concave/Red Grey DPDT, PUSH-PULL l 2DM301 Finger grip/black Grey DPDT, PULL-TO-CHEAT l 2DM409 Finger grip/black Black.745± **Extended position 23.6mm (.930 in. max.) TYPE JT ACTUATORS FOR TB TWO-CIRCUIT SWITCHES Type JT auxiliary actuators for 1TB1 switches must be ordered separately. They adapt 1TB1 switches to be operated by cams, slides or other universal mechanical means. The actuators also provide supplementary overtravel to the switches. Two screws, nuts and lockwashers are provided with each actuator. Cat. No. Actuator Type ACTUATORS FOR TB TWO-CIRCUIT SWITCHES l JT-5 Roller leaf $ JT-5 NOTE: ACTUATOR PRICES DO NOT INCLUDE SWITCHES DP SERIES Type/Colour Faceplate Colour Position (In.) Max. (In.) SPNO, MOMENTARY l 1DP5 Bullet nose/white White.595± $6.91 ITB1-1 Fine silver, gold, or bifurcatedgold contacts for circuit fidelity Cover securely cemented to base Long-life berylliumcopper spring Wearresistant phenolic base and cover Elongated hole for easier, more accurate mounting ITB1-2 1SX1T ITB1-3 CONTACT ARRANGEMENT TWO-CIRCUIT DOUBLE-BREAK TYPE TB MINIATURE TWO-CIRCUIT DOUBLE-BREAK SWITCHES TB miniature switches are basic two-circuit double break or four-circuit double break switch units which offer a means of controlling isolated circuits. Because of their circuitry, these switches find many uses in modern control systems. The terminals of two- and four-circuit double-break switches must be wired to identical voltage sources and of the same polarity. The loads should be on the same side of the line. These switches have several auxiliary actuators, a choice of terminal styles and a power load switching capability of up to 10 amperes with a motor capacity of 1 2 hp at 125 VAC. ELECTRICAL RATING TWO-CIRCUIT DOUBLE-BREAK 10 amps 125 and 250 vac; 1 2 hp 125 vac; 10 amps 30 vdc. TYPE TB SWITCHES Cat. No. Terminals PIN PLUNGER ACTUATOR TWO-CIRCUIT DOUBLE-BREAK 10 AMP, 125 VAC CONTACTS l 1TB1-1 End Screw $33.06 l 1TB1-2 End Solder l 1TB1-3 Front Solder MOUNTING HOLES ACCEPT PINS OR SCREWS OF 2,3/.09 DIA TYPE SX SUBMINIATURE BASIC SWITCHES SX series subminiature basic switches are the smallest of the Micro Switch snap-action switches and are ideal where savings in space and weight are important. These switches feature a low operating force to 3 oz. (85 grams) maximum with current carrying capacity of 7 amps and a mechanical life expectancy of 10 million operations. Mounting is by two.09 mounting holes on.19 centres. The T solder terminals are ideal for wrap around easy solder lead wire attachment. Max. Actuator Description l 1SX1-T Pin $8.82 l 2SX1-T Pin l 1SX48-T Pin 9.49 l 11SX21-T Pin 7.69 l 311SX1-T Straight lever 9.54 l 311SX2-T Straight lever 9.18 l 311SX3-T Straight lever 9.44 l 311SX4-T Straight lever 9.64 l 311SX5-T Straight lever

11 TYPE V3 MINIATURE BASIC SWITCH V3 miniature basic switches feature high electrical capacity and long life. Their size and shape meet design requirements in all types of applications. There is a choice of SPDT, SPNC, and SPNO circuitry. Many level styles, contact materials, and terminal variations can be furnished. UL Recognized, CSA Approved. Contact Electro Sonic for ordering information. TYPE V3 MINIATURE BASIC SWITCHES, QUICK CONNTECT TERMINALS Actuator Length (In) SIMULATED ROLLER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-1B17D8-263 General use $2.84 SIMULATED ROLLER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-1B17D8-263 Low force SIMULATED ROLLER SPDT 11 AMP, 125, 250, 277 VAC CONTACTS l V7-7B19D8-263 High force. Most applications SIMULATED ROLLER SPDT 15.1 AMP, 125 OR 250 CONTACTS l V7-6C17D8-263 Highest force. Up to 15.1 amps load with reduced life SIMULATED ROLLER SPDT 15.1 AMP, 125 OR 250 CONTACTS l V7-1C17D8-263 High force. Up to 15.1 amps load V3-343-D8 V7-2B17D8 V7-1C17D8-002 V7-2B17D8-022 V3-343-D8 V TYPE V3 MINIATURE BASIC SWITCHES, QUICK CONNECT TERMINALS PIN PLUNGER-SPDT 1 AMP, 125 VAC CONTACTS V3-343-D8 General use, gold 8 max..040 $6.69 alloy crosspoint contacts PIN PLUNGER-SPDT 5 AMP, 125, 250, 277 VAC CONTACTS V D8 Lowest force PIN PLUNGER-SPDT 5 AMP, 125, 250, 277 VAC CONTACTS V D8 Lowest force PIN PLUNGER-SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-2B17D8 Low force PIN PLUNGER-SPDT 11 AMP, 125, 250, 277 VAC CONTACTS l V3-101-D8 Higher force. Most 8 max applications PIN PLUNGER-SPDT 15.1 AMP, 125 OR 250 VAC CONTACTS l V3-1-D8 Highest force. Up to 15.1 amps load with reduced life. V D8 High force. Up to amps load PIN PLUNGER-SPDT 20 AMP, 277 VAC CONTACTS l V7-1V19E9 Up to 20 amps load PIN PLUNGER-SPDT 25 AMP, 277 VAC CONTACTS l V7-1Z19E9 Up to 25 amps PIN PLUNGE 10 AMP, CONTACTS V MIL-S-8805 application requirements (MS ) (SPDT) V MIL-S-8805 application requirements (MS ) (SPNC) V MIL-S-8805 application requirements (MS ) (SPNO) V7-2B17D8-048 V7-2B17D8-022 TYPE V3 MINIATURE BASIC SWITCHES, QUICK CONNECT TERMINALS Actuator Length Force (In.) (oz.) Recommended For STRAIGHT LEVER SPDT 11 AMP, 125, 250, 277 VAC CONTACTS l V7-1C17D8-002 Higher force $2.79 Most applications STRAIGHT LEVER SPDT 15.1 AMP, 125 OR 250 VAC CONTACTS l V7-1C17D Highest force. Up to 15.1 amps load with reduced life STRAIGHT LEVER SPDT 15.1 AMP, 125 OR 250 VAC CONTACTS l V7-1C17D8-002 High force. Up to 15.1 amps load STRAIGHT LEVER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-2B17D8-022 General use STRAIGHT LEVER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-2B17D8-022 Low force STRAIGHT LEVER SPDT 11 AMP, 125, 250, 277 VAC CONTACTS V7-1B-17D8-022 Higher force. Most applications Continued on next page

12 TYPE V3 MINIATURE BASIC SWITCHES, QUICK CONNECT TERMINALS Recommended For Actuator Length (In.) Force (oz.) STRAIGHT LEVER SPDT 15.1 AMP, 125 OR 250 VAC CONTACTS V7-1C17D8-022 Higher force. Most applications $2.55 STRAIGHT LEVER SPDT 5 AMP, 125, 250, 277 VAC CONTACTS l V7-2B17D8-048 Lower force STRAIGHT LEVER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-2B17D8-048 General use STRAIGHT LEVER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-2B17D8-048 Low force STRAIGHT LEVER SPDT 11 AMP, 125, 250, 277 VAC CONTACTS l V7-7B17D8-048 Higher force. Most applications STRAIGHT LEVER SPDT 15.1 AMP, 125 OR 250 VAC CONTACTS l V7-6C17D Highest force. Up to 15.1 amps load with reduced life STRAIGHT LEVER SPDT 15.1 AMP, 125 OR 250 VAC CONTACTS l V7-6C17D High force. Up to 15.1 amps load STRAIGHT LEVER SPDT 10 AMP, 125 OR 250 VAC CONTACTS l V7-6B19D8-057 General use STRAIGHT LEVER SPDT 11 AMP, 125, 250, 277 VAC CONTACTS l V7-6B19D8-057 Most applications TYPE V3 MINIATURE BASIC SWITCHES, QUICK CONNECT TERMINALS Actuator Length Force (In.) (oz.) Recommended For ROLLER LEVER SPDT 11 AMPS, 125, 250, 277 VAC CONTACTS l V3L-111-D8 Higher force $4.24 Most applications ROLLER LEVER SPDT 15.1 AMPS, 125 OR 250, VAC CONTACTS V3L-4-D Highest force. Up to 15.1 amps load with reduced life ROLLER LEVER SPDT 15.1 AMPS, 125 OR 250, VAC CONTACTS l V3L-3004-D8 High force. Up to 15.1 amps load JS-2 JS-5 JS-7 JS-220 JS-246 JS-221 V7-2B17D8-201 V3L-1101-D8 JS-33 JS-31 TYPE V3 MINIATURE BASIC SWITCHES, QUICK CONNECT TERMINALS Recommended For Actuator Length (In.) Force (oz.) ROLLER LEVER SPDT 10 AMPS, 125 OR 250 VAC CONTACTS l V7-2B17D8-201 General use $3.25 ROLLER LEVER SPDT 10 AMPS, 125 OR 250 VAC CONTACTS l V7-2B17D8-201 Low force ROLLER LEVER SPDT 11 AMPS, 125, 250, 277 VAC CONTACTS l V7-7B17D8-201 Higher force. Most applications ROLLER LEVER SPDT 15.1 AMPS, 125 OR 250, VAC CONTACTS l V7-1C17D8-201 Highest force. Up to 15.1 amps load with reduced life ROLLER LEVER SPDT 15.1 AMPS, 125 OR 250, VAC CONTACTS l V7-1C13D8-201 High force. Up to 15.1 amps load ROLLER LEVER SPDT 10 AMPS, 125 OR 250 VAC CONTACTS l V3L-1101-D8 General use JS-2, JS-5, JS-7 JS-220, JS-246, JS-221 TYPE JS ACTUATORS FOR SM SWITCHES Type JS actuators for SM switches must be ordered separately. Two screws, nuts, lockwashers and insulator are supplied with each actuator. Single or tandem switch assemblies can be accommodated with appropriate actuators. Description Actuator Length (In.) LEAF ACTUATOR l JS-2 Straight leaf $2.27 l JS-5 Roller leaf (bronze roller) l JS-7 Formed leaf (simulated roller) LEVER ACTUATORS l JS-220 Straight lever l JS-246 Roller leaver (steel roller) l JS-221 Formed lever (simulated roller) TANDEM LEAF ACTUATOR (FOR TWO SWITCHES) l JS-33* Tandem leaf l JS-31* Tandem roller leaf (bronze roller) Note: Actuator prices do not include switches. Above actuators should be used below +300 F. *Travel characteristics on tandem actuators vary with actual basic switch characteristics. 533

13 TYPE SM SUBMINIATURE BASIC SWITCHES These switches combine small size and light weight with ample electrical capacity, precision operation and long life. Unless otherwise noted, all cat. no.s have silver contacts. FEATURES: Low operating force to 2 ounces max. Temperature range: 65 to +185 F ( 54 to 85 C). UL recognized, CSA certified. 11SM1077-T 111SM1-T 11SM1077-T TYPE SM SUB-MINIATURE BASIC SWITCHES Force (oz) PIN PLUNGERS SPDT 5 AMP, 250 VAC CONTACTS 11SM1-T Most applications $ SM3-T in temperature to +250 F (121 C) l 11SM244-T in temperature to +400 F (204C) 100 hrs. 11SM401-T Less differential time. 3.5 max SM284-T2 MIL-S-8805 application requirements (MS SM284 MIL-S-8805 application (MS ) requirements, solder terminals (MS ) 22SM1-T Best stability under varying humidity PIN PLUNGERS SPDT 11 AMP, 125 OR 250 VAC CONTACTS 41SM1-T Up to 11 ampere 1/4 hp (AC) load ROLLER LEAF SPDT 5 AMP, 250 VAC CONTACTS 111SM2-T Flexible leaf with roller ROLLER LEAF SPDT 1 AMP, 125 VAC CONTACTS 111SM23-T Flexible leaf with roller and gold contacts INTEGRAL LEAF SPDT 5 AMP, 250 VAC CONTACTS 111SM1-T Force and stability of flexible leaf actuator INTEGRAL LEAF SPDT 1 AMP, 125 VAC CONTACTS 111SM17-T Force and stability of flexible leaf actuator with gold contacts INTEGRAL LEAF SPDT 5 AMP, 250 VAC CONTACTS 311SM1-T.285 inch (7,24mm) straight lever INTEGRAL LEAF SPDT 1 AMP, 125 VAC CONTACTS 311SM23-T.285 inch (7,24mm) straight lever with gold contacts INTEGRAL LEAF SPDT 4 AMP, 250 VAC CONTACTS 311SM701-T.285 inch (7,24mm) straight level. Lower force SM2-T 111SM2-T 111SM1-T 311SM1-T 311SM1-T TYPE SM SUB-MINIATURE BASIC SWITCHES Force (oz) PIN PLUNGERS SPDT 1 AMP, 125 VAC CONTACTS 11SM1077-T Gold alloy contacts $ SM604-T Bifurcated gold contacts SM23-T Application requiring gold contacts 12SM4-T Best reliability (Bifurcated gold contacts) PIN PLUNGERS SPDT 4 AMP, 250 VAC CONTACTS 11SM701-T Lower force Continued on next page

14 Omron Switches MM SQUARE TYPES B3W-1000 B3W-1050 B B B3W KEYCAPS Colour 6MM q 6MM SWITCH SIZE 4MM q 4MM KEYCAP SIZE l B Light Grey $.45 l B Black.45 l B Orange.45 12MM q 12MM SWITCH SIZE 12MM q 12MM KEYCAP SIZE l B Light Grey.45 l B Black.45 l B Orange.45 l B Yellow.45 l B Blue.45 Unsealed Snap Action Switches 12-MM SQUARE TYPES B3W-4000 B3W-4050 OMRON B3W SERIES MECHANICAL KEYSWITCHES Sealed Construction Allows Immersion Cleaning after Automatic Soldering. FEATURES: Available in two sizes:.24 (6mm) square and.47 (12mm) square. Snap-action contact mechanism assures short key stroking and a sharp click to confirm input. Ground terminal available to protect against static electricity. Ideal for applications such as audio, office, and communications equipment, measuring instruments, TV s, VCR s, industrial robots, and vending machines. OMRON B3W SERIES MECHANICAL KEYSWITCH [50MA, 24VDC (RESISTIVE LOAD) SPST-NO (MOMENTARY CONTACT)] Cat. Switch Height Ground No. Type Pitch Terminal.24 q.24 (6MM q 6MM), (OF = 160G). l B3W-1000 Standard Flat 4.3mm 6.5mm No $.88 l B3W-1050 Standard Projected 7.3mm 6.5mm No.88 l B3W-1100 Standard Flat 4.3mm 6.5mm Yes.88 l B3W-1150 Standard Projected 7.3mm 6.5mm Yes q.47 (12MM q 12MM), (OF = 200G). l B3W-4000 Standard Flat 4.3mm 12.5mm No 1.04 l B3W-4050 Standard Projected 7.3mm 12.5mm No 1.04 l B3W-4100 Standard Flat 7.3mm 12.5mm Yes 1.04 l B3W-4150 Standard Projected 4.3mm 12.5mm Yes 1.04 OMRON A A-20GQ- -K Continued on next page

15 Omron Switches 329 OMRON D2F A-20G- -K A-20GD- -K PIN PLUNGER D2F, D2F-01 A-20GV- -K A-20GV22- -K Unsealed Snap Action Switches A GENERAL PURPOSE BASIC SWITCH Pre- Over Actuator Op. Force Trav Trav. OP. Point A-20G-B7-K Pin g 1.3 mm 0.25 mm 16.3±0.4 mm $12.27 A-20GD-B7-K Short g 1.3 mm 3 mm 26.2±0.5mm Spring A-20GV-B7-K Hinge 70 g 15.9 mm 4 mm 19±0.8 mm Lever A-20GV22-B7 Short 160 g 6.3 mm 1.2 mm 29.8±0.8 mm Hinge Roller A-20GQ-B7-K Panel Mount g 1.3 mm 5.6 mm 21.8±0.8 mm NOTE: Additional versions, including solder terminal types are available. Please contact Electro Sonic for details. 20 amp contact rating, SPDT, screw terminal. SUBMINIATURE BASIC SWITCH HINGE LEVER D2F-01L, D2F-01FL FEATURES: Super compact, ideal for PCB mounting (6.5 H 12.8 W 5.8 D mm). Switches 3 A loads (general-purpose) 1 A loads (low-force general-purpose) and 0.1 A loads (microvoltage/microcurrent). Long lifespan assured by high-precision dual spring reverse-action mechanism. Flux penetration prevented by using an insert terminal and allowing a height difference at the case bottom. Ideal for a wide variety of applications, from household appliances and office equipment to audio equipment and communications equipment. D2F SUBMINIATURE BASIC SWITCH, SPDT, TERMINAL = PCB Contact Rating Op. Force Ret. Force Over Trav. M.D. Op. Point l D2F 3 amp 150 g 20 g 0.25 mm 0.12 mm 5.5±0.3 mm $2.35 l D2F amp 150 g 20 g 0.25 mm 0.12 mm 5.5±0.3 mm 2.35 l D2F-01L 0.1 amp 80 g 5 g 0.55 mm 0.5 mm 6.8±1.5 mm 2.61 l D2F-01FL 0.1 amp 25 g 2 g 0.55 mm 0.5 mm 6.8±1.5 mm 2.61 NOTE: Additional versions, including solder, right angle terminals,and roller actuators are available. Please contact Electro Sonic for details. 543

16 Omron Switches 329 OMRON SS OMRON V HINGE LEVER SS-01GL-E SIMULATED ROLLER HINGE LEVER SS-01GL13 V-15G2-1 5-K V-10G2-1BOX>4-K HINGED ROLLER LEVER SS-01GL2 V-15G3-1 5-K V-10G3-1 4-K PIN PLUNGER SS-01 SS SERIES SUBMINIATURE BASIC SWITCH FEATURES: Economical, subminiature basic switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions, permit easy setting. Wide switching capacity range from microvoltage/current loads (1 ma at 5 VDC) to high-capacity loads 10.1 A at 250 VAC). Choose standard operating force, low force (SS- -F) or super-low force (SS- -E) models. SPDT models shown; SPST-NO and SPST-NC contact forms available. SS SUBMINIATURE BASIC SWITCH Contact Op. Over Rating Actuator Force Trav. Op. Point l SS-5 5 A Pin 150 g 0.5 mm 8.4±0.5 mm $2.48 l SS-5GL 5 A Hinge Lever 50 g 1.2 mm 8.8±0.8 mm 2.70 l SS-5-F 5 A Pin 50 g 0.5 mm 8.4±0.5 mm 2.83 l SS-5GL2 5 A Hinge Roller 50 g 1.2 mm 14.5±0.8 mm 3.42 l SS-5GL13 5 A Simulated 50 g 1.2 mm 10.7±0.8 mm 2.83 Roller Hinge l SS-01-E.01 A Pin 25 g 0.5 mm 8.4±0.5 mm 4.86 l SS-01GL 0.1 A Hinge Lever 50 g 1.2 mm 8.8±0.8 mm 4.86 l SS-01GL A Simulated 50 g 1.2 mm 10.7±0.8 mm 4.86 Roller Hinge l SS-01GL2 0.1 A Hinge Roller 50 g 1.2 mm 14.5±0.8 mm 5.16 l SS A Pin 150 g 0.4 mm 8.4±0.5 mm 3.33 l SS-10GL 10.1 A Hinge Lever 50 g 1.0 mm 8.8±0.8 mm 3.72 *Additional version available. Please contact Electro Sonic for more details. NOTE: SPDT, Terminal: Soldering. V-15G4-1 5-K V-10G4-1 4-K V-15G5-1 5-K V-10G5-1 4-K Continued on next page

17 Omron Switches 329 V SERIES BASIC SWITCH V-15G6-1 5-K V-10G6-1 4-K FEATURES: Breaks from 0.1 A to 21 A. Applications include not only industrial equipment but also commercial products (OEM). Low force, high contact reliability design available (Type name VX). V BASIC SWITCH, QUICK CONNECT, SPDT Actuator Op. Force Pre- Trav Over Trav Op. Point CONTACT RATING 15 AMP l V-15G-1C25-K Pin 200 g 1.2 mm 1.3 mm 14.7±0.4 mm $4.31 l V-15G2-1C25-K Hinge 125 g 2.3 mm 2.3 mm ,-3.2 mm 4.38 Lever l V-15G3-1C25-K Long 70 g 9.0 mm 3.0 mm 15.2±2.5 mm 4.78 Hinge l V-15G4-1C25-K Formed 125 g 3.3 mm 2.3 mm 18.7±1.2 mm 4.64 Hinge l V-15G5-1C25-K Short 240 g 1.5 mm 1.0 mm 20.7±0.6 mm 5.26 Hinge l V-15G6-1C25-K Hinge Roller 125 g 3.3 mm 2.3 mm 20.7±1.6 mm 5.26 CONTACT RATING 10 AMP l V-10G-1C24-K Pin 100 g 1.2 mm 1.3 mm 14.7±0.4 mm 4.31 l V-10G2-1C24-K Hinge 60 g 3.3 mm 2.3 mm 15.2±1.2 mm 4.38 Lever l V-10G3-1C24-K Long 35 g 7.6 mm 3.2 mm 15.2±2.6 mm 4.60 Hinge l V-10G4-1C24-K Formed 60 g 3.3 mm 2.3 mm 18.7±1.2 mm 4.64 Hinge l V-10G5-1C24-K Short 120 g 1.5 mm 1.0 mm 20.7±0.6 mm 5.26 Roller l V-10G6-1C24-K Hinge Roller 60 g 3.3 mm 2.3 mm 20.7±1.6 mm 5.26 *Solder and screw terminal types are also available. Please contact Electro Sonic for more details. OMRON Z Z-15G- -K Z SERIES GENERAL PURPOSE BASIC SWITCH FEATURES: High precision basic switch in a variety of styles. Wide margins of operating conditions increases the operating speed range. Available in a variety of contact forms: basic, spill contact, maintained contact, adjustable contact gap types. Z-15GD- -K Z-15GQ- -K Z BASIC SWITCHES, SCREW TERMINAL, SPDT, 15 AMP Actuator Op. Force Over Trav. Op. Point Z-15G-B7-K Pin 250 to 350 g 0.13 mm 15.9±0.4 mm $9.07 Z-15GD-B7-K Short 250 to 350 g 1.6 mm 21.5±0.5 mm Spring Z-15GK355-B7-K Spring, Drip Proof 540 g 3.5 mm 37.8±1.2 mm Actuator Op. Force Over Trav. Op. Point Z-15GK55-B7-K Spring 540 g 1.6 mm 28.2±.5 mm $14.99, Drip Proof Z-15GQ-B7-K Panel 250 to 350 g 5.5 mm 21.8±0.8 mm Mount Z-15GQ21-B7-K Panel 250 to 350 g 3.58 mm 33.4±1.2 mm Mount Cross Roller Z-15GQ22-B7-K Panel 250 to 350 g 3.58 mm 33.4±1.2 mm Mount Roller Z-15GW-B7-K Hinge 70 g 5.6 mm 19.±0.8 mm Lever Z-15GW2-B7-K Hinge 100 g 4.0 mm 30.2±0.8 mm Roller Z-15GW22-B7-K Short Hinge Roller 160 g 2.4 mm 30.2±0.4 mm *Additional versions are available. Please contact Electro Sonic for more details. 545

18 Omron Switches 329 Sealed Snap Action Switches PIN PLUNGER D2SW-3 S, D2SW-01 S HINGE LEVER D2SW-3L3 S, D2SW-01L1 S D2HW SEALED ULTRA SUBMINIATURE BASIC SWITCH FEATURES: Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action Case dimensions are 78% of conventional models Extra-long stroke even without levers (O.T.: 1.4mm) Made of environmentally friendly materials All models are lead-free Lead lengths are a standard 30cm Contact rating: 2A/12VDC, 1A/24VDC, 0.5A/42VDC SIMULATED HINGE LEVER D2SW-3L3 S, D2SW-01L3 S Contact Form Mounting Structure STRAIGHT PCB TERMINALS l D2HW-A2(1)1D SPDT Without Posts $3.83 RIGHT-ANGLED PCB TERMINALS l D2HW-BR2(1)1DR SPDT Posts On Right 3.83 LEFT-ANGLED PCB TERMINALS l D2HW-BL2(1)1DL SPDT Posts On Left 3.83 SOLDER TERMINALS l D2HW-C2(1)1H SPDT M3-Screw Mounting 4.46 l D2HW-BR2(1)1H SPDT Posts on Right 3.83 l D2HW-BL2(1)1H SPDT Posts on Left 3.83 LEADWIRE-DOWNWARD TERMINALS l D2HW-C2(1)1M SPDT M3-Screw Mounting 8.31 l D2HW-C2(1)2M SPST-NC M3-Screw Mounting 8.31 l D2HW-C2(1)3M SPST-NO M3-Screw Mounting 8.31 l D2HW-BR2(1)1M SPDT Posts On Right 7.69 l D2HW-BR2(1)2M SPST-NC Posts On Right 7.69 l D2HW-BR2(1)3M SPST-NO Posts On Right 7.69 l D2HW-BL2(1)1M SPDT Posts On Left 7.69 l D2HW-BL2(1)2M SPST-NC Posts On Left 7.69 l D2HW-BL2(1)3M SPST-NO Posts On Left 7.69 LEADWIRE-RIGHT-SIDE TERMINALS l D2HW-C2(1)2MR SPST-NC M3-Screw Mounting 8.31 l D2HW-C2(1)3MR SPST-NO M3-Screw Mounting 8.31 D2NW-BR2(1)2MR SPST-NC Posts On Right 7.69 l D2HW-BR2(1)3MR SPST-NO Posts On Right 7.69 l D2HW-BL2(1)2MR SPST-NC Posts On Left 7.69 l D2HW-BL2(1)3MR SPST-NO Posts On Left 7.69 LEADWIRE-LEFT-SIDE TERMINALS l D2HW-BR2(1)2ML SPST-NC Posts On Right 7.69 l D2HW-BR2(1)3ML SPST-NO Posts On Right 7.69 l D2HW-BL2(1)2ML SPST-NC Posts On Left 7.69 l D2HW-BL2(1)3ML SPST-NO Posts On Left 7.69 NOTE: Replace (1) in with 0-Pin, 1-Hinge Lever, 2-Long Hinge Lever, 3- Simulated Hinge Lever, 6-Leaf Lever, 7-Simulated Leaf Lever, 8-Long Hinge Lever. HINGE ROLLER LEVER D2SW-3L2 S, D2SW-01L2 S D2SW HIGH-QUALITY WATERTIGHT BASIC SWITCH FEATURES: Meets IP67 requirements Monoblock construction assures high sealing capability Wide operating temperature range of 40 C to 85 C Perfect for a variety of applications Standard lead wire lengths on models incorporating them is 30cm (AWG22) PIN PLUNGER Continued on next page