SECTION XI. Subject Interpretation File No.
|
|
- Piers Hunt
- 5 years ago
- Views:
Transcription
1 SECTION XI Subject Interpretation File No. Appendix I, Supplement 9 (1995 Edition With the 1996 Addenda Through the 2005 Addenda).... XI IN Appendix VIII, Qualification of Personnel With Limited Certification (1998 Addenda up to and Including the 2004 Edition With the 2005 Addenda).... XI IN Code Cases N-577, N-577-1, N-578, and N (1989 Edition Through the 2005 Addenda).... XI IN Code Data Reports Attached to Form NIS-2 (1995 Edition With the 1996 Addenda Through the 2001 Edition With the 2003 Addenda)... XI IN IWA-2300 (1989 Edition Through the 2005 Addenda)... XI IN IWA-4000 (1989 Edition Through the 2004 Edition With the 2006 Addenda)... XI IN IWA-4000 (2001 Edition up to and Including the 2005 Addenda)... XI IN IWA-4132, Items Rotated From Stock (1995 Edition With the 1996 Addenda Through the 2001 Edition With the 2003 Addenda)... XI IN IWA-4142 and IWA-4221(a) and (b) (1995 Edition With the 1995 Addenda Through the 2004 Edition With the 2006 Addenda)... XI IN IWA-4150(c) (1995 Edition With the 1995 Addenda Through the 2004 Edition With the 2006 Addenda).... XI IN IWA-4440, Welding and Welder Qualification (Including Welding Operators) (1995 Edition With the 1997 Addenda Through the 2004 Edition With the 2005 Addenda)... XI IN IWA-7210(b), IWA-1400(n), and IWA-2110(h) (1989 Edition)... XI IN IWB-2500 (1989 Edition Through the 2004 Edition With the 2006 Addenda)... XI IN IWB-3111 and IWB-3112 (1995 Edition Through the 2004 Edition With the 2006 Addenda).... XI IN Table IWC-2500, Examination Categories C-F-1/C-F-2 (1989 Edition Through the 2004 Edition With the 2005 Addenda).... XI IN04-019
2 Interpretation: XI Subject: IWA-4000 (2001 Edition up to and Including the 2005 Addenda) Date Issued: January 11, 2006 File: IN Question: Does IWA-4000 address Class 2 and 3 mechanically installed heat exchanger tube plug assemblies? Interpretation: XI Subject: IWA-2300, Qualification of Automated Data Acquisition Equipment Operators (1989 Edition Through the 2005 Addenda) Date Issued: January 11, 2006 File: IN Question: Is it a requirement of IWA-2310 that personnel involved in the operation of automated data acquisition or remote examination equipment in accordance with instructions provided by a qualified NDE examiner, but whose job function requires no knowledge of the NDE method involved, be qualified and certified as NDE examiners? Interpretation: XI Subject: IWA-4440, Welding and Welder Qualification (Including Welding Operators) (1995 Edition With the 1997 Addenda Through the 2004 Edition With the 2005 Addenda) File: IN Question: Is it a requirement of IWA-4440(b)(6) that another performance qualification be performed after receipt of a PQR if the Owner accepting the PQR has a welder already qualified using the parameters of the resulting WPS? Interpretation: XI Subject: Code Cases N-577, N-577-1, N-578, and N (1989 Edition Through the 2005 Addenda) File: IN Question: Is it a requirement of N-577, N577-1, N-578, or N to apply the rules of IWA-4000/IWA-7000 to a nonclass piping structural element determined to be High Safety Significant?
3 Interpretation: XI Subject: Appendix I, Supplement 9 (1995 Edition With the 1996 Addenda Through the 2005 Addenda) File: IN Question: Is it a requirement of Appendix I, Supplement 9, that two angle beams having nominal angles of 45 deg and 60 deg shall be used when conducting vessel examinations from the outside diameter or from the inside diameter on unclad surfaces? Interpretation: XI Subject: Code Data Reports Attached to Form NIS-2 (1995 Edition With the 1996 Addenda Through the 2001 Edition With the 2003 Addenda) File: IN Question: Is it a requirement of Form NIS-2 for the Manufacturer s Data Report to be attached to Form NIS-2 covering subsequent installations of items that have previously been installed? Interpretation: XI Subject: Appendix VIII, Qualification of Personnel With Limited Certification (1998 Addenda up to and Including the 2004 Edition With the 2005 Addenda) File: IN Question: Does VIII-2200 permit personnel certified to Appendix VII, with reduced training and experience as allowed by IWA-2350 for performing examinations of limited scope, to qualify in accordance with VIII-3000, provided the Component Qualification Supplement(s) is within the limited scope of the individual s certification?
4 Interpretation: XI Subject: IWA-7210(b), IWA-1400(n), and IWA-2110(h) (1989 Edition) File: IN Question (1): Does IWA-7210(b) permit the use of N- or NPT-stamped replacement items that have previously been in service at another location? Reply (1): Yes. Question (2): Is it a requirement of IWA-1400(n) that replacement parts/components must be stored under continuous control of a qualified Appendix B or NQA-1 QA program prior to installation? Reply (2): IWA-1400(n) does not address specific QA program requirements. Question (3): Is it a requirement of IWA-2110(h) that ANII approve the Owner s corrective action performed under Owner s Appendix B or NQA-1 program for replacement parts/components? Reply (3): No. Interpretation: XI Subject: Table IWC-2500, Examination Categories C-F-1/C-F-2 (1989 Edition Through the 2004 Edition With the 2005 Addenda) File: IN Question: Do the requirements of IWC-2500, Table IWC , Examination Categories C-F-1 and C-F-2 apply only to welds that have a pressure-retaining function for the Class 2 system? Interpretation: XI Subject: IWA-4132, Items Rotated From Stock (1995 Edition With the 1996 Addenda Through the 2001 Edition With the 2003 Addenda) File: IN Question: For the purpose of determining applicability under IWA-4132, is Owner-required inspection considered testing?
5 Interpretation: XI Subject: IWA-4142 and IWA-4221(a) and (b) (1995 Edition With the 1995 Addenda Through the 2004 Edition With the 2006 Addenda) File: IN Question: Does IWA-4221(a) or (b) require identification and documentation of material used in a replacement item even if neither the Construction Code nor Owner s Requirements require such identification and documentation? However, the QA Program requirements of IWA-4142 must be met. Interpretation: XI Subject: IWA-4150(c) (1995 Edition With the 1995 Addenda Through the 2004 Edition With the 2006 Addenda) File: IN Question (1): If a repair/replacement activity is implementing a modification, that changes the design of the item being replaced, does IWA-4150(c)(2)(b) require identification of the Construction Code(s) used for the modification? Reply (1): Yes. Question (2): If a repair/replacement activity is implementing a modification which changes the design of the item being replaced, does IWA-4150(c)(2)(a) require identification of the Construction Code(s) of the item to be modified? Reply (2): Yes. Interpretation: XI Subject: IWA-4000 (1989 Edition Through the 2004 Edition With the 2006 Addenda) File: IN Question: Is it a requirement of Section XI that replacement of a flanged elastomer expansion joint comply with IWA-4000 (IWA-7000 for Editions and Addenda Before the 1989 Edition With the 1991 Addenda)?
6 Interpretation: XI Subject: IWB-2500 (1989 Edition Through the 2004 Edition With the 2006 Addenda) File: IN Question: What is the appropriate examination category and examination requirements according to IWB-2500 for a weld connecting a steam generator primary nozzle directly to a reactor coolant pump housing? Reply: Section XI does not address this configuration. Interpretation: XI Subject: IWB-3111 and IWB-3112 (1995 Edition Through the 2004 Edition With the 2006 Addenda) File: IN Question: IWB-3111(b) and IWB-3112(b) state that a component whose volumetric and surface examination (IWB-2200) detects flaws that meet the nondestructive examination standards of NB-2500 and NB-5300 shall be acceptable. If RT for welding required by Section III, NB-5000 identifies and documents indications that are acceptable, is the PSI acceptable even if these indications do not meet the acceptance standards of IWB-3000?
SECTION XI. Subject Interpretation File No. Cases N and N-729-2, -3141(c)...XI
SECTION XI Subject Interpretation File No. Cases N-729-1 and N-729-2, -3141(c)....XI-1-10-45 11-1956 Figure IWB-2500-7(a) and Code Case N-613-1, Fig. 1 (2001 Edition With the 2003 Addenda Through the 2010
More informationSECTION XI. Subject Interpretation File No. Code Case N XI Code Cases N-729 Through N
SECTION XI Subject Interpretation File No. Code Case N-606-1....XI-1-13-19 13-56 Code Cases N-729 Through N-729-3....XI-1-13-16 12-2059 IWA-2323; Mandatory Appendix VI, VI-4300; and Mandatory Appendix
More informationEXAMINATION OF NOZZLE INNER RADIUS AND PIPING FROM THE OUTER SURFACE
More Info at Open Access Database www.ndt.net/?id=18560 ABSTRACT NEW DEVELOPMENTS FOR AUTOMATED NOZZLE INNER RADIUS AND PIPING INSPECTIONS D. Eargle,WesDyne International, USA WesDyne has recently engaged
More informationAPPENDIX B CERTIFICATION OF TANK CAR FACILITIES CONTENTS
M-1002 AAR Manual of Standards and Recommended Practices CERTIFICATION OF TANK CAR FACILITIES CONTENTS Paragraph Subject Page 1.0 Introduction..............................................................
More informationNRC Non-Destructive Examination Research
NRC Non-Destructive Examination Research Office of Nuclear Regulatory Research U.S. Nuclear Regulatory Commission Jeff Hixon October 22, 2009 Why NDE? U.S. Nuclear Regulatory Commission 2 Why NDE? U.S.
More informationCASES OF THE B16 VALVE, FLANGES, FITTINGS AND GASKETS STANDARDS. Approval Date: December 16, 2013
Approval Date: December 16, 2013 Cases will remain available for use until annulled by the applicable Standards Committee B16 Case 1 High Strength/High Temperature Material ASME B16.34 Group 3 Valves ASME
More informationASME B31.8 INTERPRETATIONS VOLUME 13
ASME B31.8 INTERPRETATIONS VOLUME 13 Replies to Technical Inquiries July 2001 Through December 2003 Interpretations 13-1 Through 13-8 It has been agreed to publish intepretations issued by the B31 Committee
More information5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS
Summary Description 5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS This chapter of the U.S. EPR Final Safety Analysis Report (FSAR) is incorporated by reference with supplements as identified in the
More informationNational Board Update
National Board Update Presentation to the Valve Repair Council June 2, 2016 Prepared by: Joseph F. Ball, P.E. National Board Update National Board activities Who we are and what we do National Board Inspection
More informationASME B31.3 INTERPRETATIONS NO. 16
ASME B31.3 INTERPRETATIONS NO. 16 Replies to Technical Inquiries April 1 1997 Through March 31 1998 General Information ". It has been agreed to publish interpretations issued by the 831 Committee concerning
More informationAoý. 0Constellation Nuclear. Calvert Cliffs Nuclear Power Plant. February 27, U. S. Nuclear Regulatory Commission Washington, DC 20555
Charles H. Cruse Vice President Nuclear Energy 1650 Calvert Cliffs Parkway Lusby, Maryland 20657 410 495-4455 0Constellation Nuclear Calvert Cliffs Nuclear Power Plant A Member of the Constellation Energy
More informationKKAI Report No Rev 1 Prepared for BioHeatUSA April 28, 2009
1. Summary... 3 2. Background... 3 3. Scope... 3 4. European Suppliers... 4 5. Materials... 4 6. Design... 4 7. Fabrication... 5 8. Examination... 6 9. Inspection... 6 10. Testing... 8 11. Quality Control
More informationULTRASONIC EXAMINATION
Page 1 of 9 ULTRASONIC EXAMINATION PROCEDURE Doc. No. KNS/UT/01.REV 0 Page: 9 of 9 Date: 15.09.2012 ULTRASONIC EXAMINATION PROCEDURE PREPARED & APPROVED BY NDE- Level III CERTIFIED BY REVIEWED BY Page
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD
More informationCLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE SIZES 6-12 CLASS 150/900TH HORIZONTAL WITH HINGE
T-Closure catalog 8/11/03 11:51 PM Page 1 CLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE Size A B C D E F Weight In (DN) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) Lbs (Kg) 6 (150)
More informationSYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN
SYLLABUS EASA 748/2012 Part-21 SUBPART F/G (FLY Course code: 004-C-P) Introduction During this course Participants will learn and revise the regulations and requirements according to EASA Part 21. Summary
More informationBioprocessing Equipment
ASME BPE-2009 (Revision of ASME BPE-2007) Bioprocessing Equipment A N I N T E R N A T I O N A L S T A N D A R D ASME BPE-2009 (Revision of ASME BPE-2007) Bioprocessing Equipment AN INTERNATIONAL STANDARD
More information2004 ASME BOILER & PRESSURE VESSEL CODE
2004 ASME BOILER & V PRESSURE VESSEL CODE AN INTERNATIONAL CODE NONDESTRUCTIVE EXAMINATION ASME BOILER AND PRESSURE VESSEL CODE AN INTERNATIONAL CODE V NONDESTRUCTIVE EXAMINATION 2004 Edition July 1, 2004
More informationContents INTRODUCTION...
INTRODUCTION... xiii CHAPTER 1. FROM THE SYSTEM TO THE SOFTWARE... 1 1.1. Introduction... 1 1.2. Command/control system... 2 1.3. System... 6 1.4. Software application... 8 1.4.1. What is software?...
More informationASSOCIATION OF AMERICAN RAILROADS
K.B. Dorsey Executive Director - Tank Car Safety ASSOCIATION OF AMERICAN RAILROADS 2/4/2016 SUBJECT: AAR M-1002 Tank Car Facility Certification Mr. Tim Bowman General Manager TF Warren Group, Inc. Blastech
More informationCurrent Status of Ultrasonic Examination Performance Demonstration in Korea
E-Journal of Advanced Maintenance Vol.4 (2013) 133-141 Japan Society of Maintenology Current Status of Ultrasonic Examination Performance Demonstration in Korea Yongsik KIM 1,*, Byungsik YOON 1, and Seunghan
More informationDavis Energy Group, Inc. 123 C Street Davis CA Phone
LEED for Homes Quality Assurance Process Inc. January 2015, Inc. 123 C Street Davis CA 95616 Phone 530.753.1100 Table of Contents Quality Assurance Goals 1 Provider Responsibilities 1 Quality Assurance
More information*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationMATERIALS & STANDARDS
GLAUNACH THE SILENCER HANDBOOK MATERIALS & STANDARDS ENSURING SUISTAINABLE QUALITY AND SAFETY IN OPERATION GLAUNACH GMBH 2010 ALL RIGHTS RESERVED Part V page 2 of 7 1. SILENCER STANDARD MATERIALS All materials
More informationBroetje-Automation Company Standard Structural component specification for welded parts
Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength
More informationEMERGENCY DIESEL GENERATOR SETS FOR NUCLEAR POWER PLANTS
EMERGENCY DIESEL GENERATOR SETS FOR NUCLEAR POWER PLANTS YOUR REQUIREMENT IS OUR ASSIGNMENT. MTU Onsite Energy is one of the core brands of Rolls- Royce Power Systems AG, a world-leading provider of high-
More informationGUJARAT NARMADA VALLEY FERTILIZERS COMPANY LIMITED MTPA PAC PROJECT SECTION 6 ANNEXURE 4.7 SPARES, INSP AGENCY & DOCUMENTATION
A. SPARE PARTS Outline for the supply of Spare Parts for various items is as elaborated below: A-1 MACHINERY Commissioning spares will be as per the manufacturer s recommendations. For 2 years of normal
More informationDate of Addendum Issue: Effective Addendum Date: Affected Publication: ADDENDUM 2
Date of Addendum Issue: August 2011 Effective Addendum Date: February 1, 2012 Affected Publication: API Specification 6D, Specification for Pipeline Valves, 23rd Edition, April 2009, Effective Date: October
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationOIL & GAS INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3b- SYSTEMS. 3a- MAXIMIZING TECHNOLOGY. 3c- INSTRUMENTATION
INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3a- MAXIMIZING TECHNOLOGY 3a.1- Oil & Gas HP Valves / Control Valves 3a.2- Oil & Gas Special flanges, pipes & accessories 3a.3- Custody Transfer
More informationFor BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS
For BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an Indian Standard) Draft Indian Standard SPECIFICATION
More informationAppendix A. Cooling Coil
Appendix A COILS FOR RUN-AROUND HEAT RECOVERY SYSTEM Cooling Coil Model number D--B45 Coil Information Tag Exhaust Wint Actual airflow Quantity System type 1 Chilled Water Entering dry bulb Entering wet
More informationRULES PUBLICATION NO. 98/P
RULES PUBLICATION NO. 98/P GUIDELINES REGARDING THE REQUIREMENTS FOR MARINE DIESEL ENGINES FITTED WITH NO X SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEMS 2016 January Publications P (Additional Rule Requirements)
More informationVertical & Horizontal Bladder Tank Foam Storage Devices Model MXC
1 General description The KCA bladder tank together with KCA ratio controllers, form a balanced pressure proportioning system used to mix water and firefighting foam concentrate together to produce an
More informationLarge Diameter Steel Flanges
ASME B16.47-2011 (Revision of ASME B16.47-2006) Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.47-2011 (Revision of ASME B16.47-2006) Large
More informationBVM Corporation TYPE MS TONG 6,500 FT/LBS. TORQUE
Page 1 BVM Corporation TYPE MS TONG 6,500 FT/LBS. TORQUE Part number: Serial Number: BVM CORPORTION TYPE MS TONG 6,500 FT/LBS. TORQUE WRNING: Manual tongs which have experienced excessive wear or are found
More informationWestinghouse SG Tube Sleeve Designs and Installation. Jesse Baron, PE Principal Engineer
Westinghouse SG Tube Sleeve Designs and Installation Jesse Baron, PE Principal Engineer 1 Overview What is a Tube Sleeve? Why Use a Sleeve? History of the Westinghouse SG Tube Sleeve Tube Sleeve Design
More informationARTICLE 5 ULTRASONIC EXAMINATION METHODS FOR MATERIALS
ARTICLE 5 ULTRASONIC EAMINATION METHODS FOR MATERIALS 04 T-510 SCOPE This Article provides or references requirements, which are to be used in selecting and developing ultrasonic examination procedures
More informationFigures T Basic Calibration Block T Straight Beam Calibration Blocks for Bolting
A02 ARTICLE 5 T-510 Scope... 102 T-520 General... 102 T-521 Basic Requirements... 102 T-522 Written Procedure Requirements... 102 T-530 Equipment... 102 T-531 Instrument... 102 T-532 Search Units... 102
More informationTECHNICAL SPECIFICATION CLIENT : MCM
TECHNICAL SPECIFICATION CLIENT : MCM A SPECIFICATION NO.: TSGT0951 Rev A As Built WO 100048 DESCRIPTION : 5 x 24 500 LITRE 25,0/27,5 BAR UN PORTABLE TANK Serial Number : MCMU 527021 to MCMU 527025 1.0
More informationPassenger Train Brake Inspection and Safety Rules: Guidelines for British Columbia s Heritage Railways
Passenger Train Brake Inspection and Safety Rules: Guidelines for British Columbia s Heritage Railways Part I: General 1. SHORT TITLE 1.1 For ease of reference, these rules may be referred to as the "Train
More informationSchedule SP SOLAR PURCHASE (Experimental)
I. APPLICABILITY & AVAILABILITY This Schedule is available in conjunction with the Company s Solar Purchase Program ( Program ) and is applicable only where the Customer elects to receive Electricity Supply
More informationFORBIDDEN on the TNT Air Network
Lithium Metal Batteries Lithium Ion Batteries Air Transport of Section II Lithium Batteries Overview of Air Transport of Section II Lithium Batteries Packed UN number / Packing Instruction Battery capacity
More informationGUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007
GUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007 AMERICAN GLOVEBOX SOCIETY STANDARDS DEVELOPMENT COMMITTEE All Rights Reserved Copyright 2007 No portion may be duplicated without written consent
More informationBioprocessing Equipment
ASME BPE-2007 (Revision of ASME BPE-2005) Bioprocessing Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 CONTENTS Foreword... vii Statements of Policy... viii Committee Roster...
More informationTELEDYNE TECHNOLOGIES TELEDYNE BROWN ENGINEERING Approved for Public Release. Many images contained herein courtesy of NASA
TELEDYNE TECHNOLOGIES TELEDYNE BROWN ENGINEERING 2017 Approved for Public Release. Many images contained herein courtesy of NASA 1 Parent Company Teledyne Technologies Headquartered in Thousand Oaks, California
More informationSAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
More informationSAMR Announcement on. Administrative Licensing of Special Equipment. (No.3, 2019) In order to thoroughly implement the "Proposals of the Central
SAMR Announcement on Administrative Licensing of Special Equipment (No.3, 2019) In order to thoroughly implement the "Proposals of the Central Committee of the CPC and the State Council on Promoting the
More informationbrands you trust. CRANE Nuclear Overview
brands you trust. CRANE Nuclear Overview Crane Nuclear Valves Proven Designs for the Next Generation of Nuclear Power CRANE Nuclear continues to deliver proven, innovative valve designs to the nuclear
More informationp h a s e d - a r r a y t e c h n o l o g i e s w w w. m 2 m - n d t. c o m
A new advanced portable phased - array system : the Mantis Phased-array technology Phased-array technology has been widely accepted in the industry as a powerful tool for the detection of corrosion and
More informationTM &P TECHNICAL MANUAL
TECHNICAL MANUAL TM 9-1095-204-13&P OPERATOR S, ORGANIZATIONAL, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) ANTITANK MINE DISPENSING SYSTEM M57 (NSN 1095-00-169-0300)
More informationSECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
More informationINCOMING INSPECTION DELEGATION GUIDELINES FOR ALENIA SUPPLIERS PROGRAM: ALL
INCOMING INSPECTION DELEGATION GUIDELINES FOR ALENIA SUPPLIERS PROGRAM: ALL THE CONTENT OF THIS DOCUMENT IS THE PROPERTY OF ALENIA AERONAUTICA S.p.A. THIS DOCUMENT IS SUPPLIED IN CONFIDENCE AND COMMERCIAL
More informationMetallic Gaskets for Pipe Flanges
ASME B16.20-2012 (Revision of ASME B16.20-2007) Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed AN AMERICAN NATIONAL STANDARD ASME B16.20-2012 (Revision of ASME B16.20-2007) Metallic
More informationPipe Flanges and Flanged Fittings
ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe Flanges and Flanged Fittings NPS ½ Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.5-2017 (Revision of ASME B16.5-2013) Pipe
More informationRAILWAY FREIGHT AND PASSENGER TRAIN BRAKE INSPECTION AND SAFETY RULES
RAILWAY FREIGHT AND PASSENGER TRAIN BRAKE INSPECTION AND SAFETY RULES TC O 0-95 Approved July 10, 2008 Effective October 1, 2008 Contents PART I GENERAL 3 1 Short Title 3 2 Scope 3 3 Definitions 3 4 Certification
More informationThe following FAQs will help you in determining how to meet the new Federal medical certification requirements.
Q & A - Reporting Your Medical Card to the State The following FAQs will help you in determining how to meet the new Federal medical certification requirements. The Michigan Department of State (MDOS)
More informationYStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
More informationREGULATORY CONTROL OF NUCLEAR FUEL AND CONTROL RODS
REGULATORY CONTROL OF NUCLEAR FUEL AND CONTROL RODS 1 GENERAL 3 2 PRE-INSPECTION DOCUMENTATION 3 2.1 General 3 2.2 Initial core loading of a nuclear power plant, new type of fuel or control rod or new
More informationIS1 I/O-Modules. BusRail Series General Information. Symbols. Conformity to Standards. Safety instructions. Function/Characteristics
Backplane bus for the IS1 system, constisting of data bus, PowerBus and address circuits For 2 or 4 modules Installation on 35 mm DIN rails NS 35/15 The BusRail can be interconnected for up to 18 modules
More informationSKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition
Annex J - Specific requirements for PVT collector Certification 1. Introduction and definition PVT collectors (named hybrid collectors in ISO 9806) generate heat and electric power at the same time. They
More informationMedical Examiner s Certification Integration Final Rule Impact on Certified Medical Examiners
Medical Examiner s Certification Integration Final Rule Impact on Certified Medical Examiners 2015 April 23, 2015: FMCSA published the Medical Examiner s Certification Integration final rule. June 22,
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More information(i). This Directive may be cited as the Anti Fouling Systems Directive 2003 and shall come into force on 6 th January 2003.
Anti Fouling Systems Directive 2003 Directive 01-2003 The Director of the Department of Marine Services and Merchant Shipping, in exercise of the powers conferred by Section 7, sub-section (3) of the Merchant
More informationGlobe Valve Type Fig. 1 Type 3241 Globe Valve. Mounting and Operating Instructions EB EN
Globe Valve Type 3241 Fig. 1 Type 3241 Globe Valve Mounting and Operating Instructions EB 8015-1 EN Edition July 2012 Contents Contents Page 1 Design and principle of operation.................... 4 2
More informationCover Sheet for Supplier Information of. Broetje-Automation Group
1. Cover Sheet Cover Sheet for Supplier Information of Broetje-Automation Group Within the scope of DIN EN 9100, we as Broetje-Automation Group are required to check the performance of our suppliers and
More informationTAM International, Inc. QI Visible Magnetic Particle Inspection
TAM International, Inc. QI-8.2.4-12 Visible Magnetic Particle Inspection Approved by Quality Assurance Manager Signature/Date: Greg Fletcher Reviewed by Sr. Quality Analyst Signature/Date: Thomas Young
More informationInstallation and Operation Manual
Industrial Process Installation and Operation Manual Advantage Actuator 2.0 Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health and safety...2 Transportation
More informationCertification Memorandum. Additive Manufacturing
Certification Memorandum Additive Manufacturing EASA CM No.: CM S-008 Issue 01 issued 04 April 2017 Regulatory requirement(s): CS X.571, CS X.603, CS X.605, CS X.613, 25 X.853, CS E 70, CS E 100 (a), CS
More informationOconee Nuclear Station ALLOY 600 REPAIRS 1EOC23
Oconee Nuclear Station ALLOY 600 REPAIRS 1EOC23 We re requiring more inspections due to susceptibility of material to cracking Some utilities have implemented mitigative actions Stress improvement Weld
More informationCOMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
More informationThe Participant will select one of the two Approval Categories (below) and submit the appropriate documentation.
FORM WCCL-PC3 WCCL TEST STAND APPROVAL PROCEDURE AND CHECKLIST AHRI CERTIFICATION PROGRAM FOR WATER-COOLED WATER CHILLING AND HEAT PUMP WATER-HEATING (WCCL) PACKAGES WCCL Participant: Date of Inspection:
More informationTHE EMPIRE DISTRICT ELECTRIC COMPANY P.S.C. Mo. No. 5 Sec. 4 1st Revised Sheet No. 23
P.S.C. Mo. No. 5 Sec. 4 1st Revised Sheet No. 23 Canceling P.S.C. Mo. No. 5 Sec. 4 Original Sheet No. 23 PURPOSE: The purpose of this Rider SR is to implement the solar rebate established through 393.1030
More informationAmerican Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1012 - REVISED: 2009 Backflow Preventers with an Intermediate Atmospheric Vent Separate, complete laboratory evaluation
More informationNavigating Safety and Compliance in Registration is now open online for the 2018 Idealease/NPTC Safety Seminars!
In This Issue: Navigating Safety and Compliance in 2018 Registration is now open on line for the 2018 Idealease/NPTC Safety Seminars! Seminar Schedule Are You Sharing Your Driver With Another Company?
More informationE/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
More informationENGINEERING FOR EXCELLENCE
ENGINEERING FOR EXCELLENCE Design, Construction & Instalation of Pressure Vessel /Pressure Piping built According to ASME Boiler & Pressure Vessel Code Sec. VIII Div. 1 and ASME / ANSI B31.1 / B31.3 Storage
More informationBasket Strainers. Applications. Pressures to 3705 PSIG. Temperatures to 800ºF FEATURES MATERIALS OF CONSTRUCTION END CONNECTIONS SIZES RATINGS
Applications Process Industry Metals and Mining Power Industry Water & Waste Water Chemical Industry Pulp and Paper Oil and Gas Basket Strainers Pressures to 3705 PSIG FEATURES Temperatures to 800ºF Fabricated
More informationQUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL
QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL THE CONTENT OF THIS DOCUMENT IS THE PROPERTY OF ALENIA AERONAUTICA S.p.A. THIS DOCUMENT IS SUPPLIED IN CONFIDENCE AND COMMERCIAL
More informationCOMPRESSOR STATION OPERATIONS
CONTENTS FIGURES AND TABLES... viii PREFACE... xi ACKNOWLEDGEMENTS... xiii CHAPTER 1. INTRODUCTION... 1 Scope and Outline... 1 Types of Stations... 2 Production Stations... 2 Storage Stations... 3 Transmission
More informationQuestions & Answers. New Procedures for the Technical Appraisal of a Vehicle
Questions & Answers New Procedures for the Technical Appraisal of a Vehicle 1- Since when have these new procedures been in effect? The new procedures have been in effect since June 18, 2018. The new requirements
More informationYarway Que - Temp Desuperheater Standard-/heavy Duty Installation and maintenance Instructions
Before installation these instructions must be fully read and understood Model 33 / 43 Installation of the Que - Temp Desuperheater Model 13 / 23 Before installation, check the Que - Temp Desuperheater
More informationOffshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD)
Offshore manufacturing and fabrication: guidelines for heavy trailers (class TC and TD) 1. INTRODUCTION This guideline has been prepared to alleviate confusion regarding the difference in Rule requirements
More informationPneumatic Controller for Temperature. Type Pneumatic Controller for Temperature. Type Mounting and Operating Instructions EB 7065 EN
Pneumatic Controller for Temperature Type 3301 Pneumatic Controller for Temperature Type 301-1 Mounting and Operating Instructions EB 7065 EN Edition January 2014 Definition of the signal words used in
More informationNuclear Regulatory Commission
Vol. 76 Tuesday, No. 119 June 21, 2011 Part III Nuclear Regulatory Commission 10 CFR Part 50 American Society of Mechanical Engineers (ASME) Codes and New and Revised ASME Code Cases; Final Rule VerDate
More informationBurlington County Model Railroad Club. Rolling Stock and Locomotive Certification STANDARDS
Burlington County Model Railroad Club Rolling Stock and Locomotive Certification STANDARDS (Revised 09/23/2011) This document is comprised of the rolling stock and locomotive standards for the Burlington
More information22 Kg/Sq.cm gauge at 55deg C. As per Design Code requirement. 100% requiredfor entire vessel
LPG PRESSURE VESSEL FOR AUTO LPG PURPOSE S.NO. DESCRIPTION 1 Service Propane PARTIES CONFIRMATION 2 Type Underground 3 Design Code ASME - Sec VIII- Div II 4 Capacity (Water) KL 7.5 KL / 10 KL 5 Working
More information94D / 94F / 94M / 96M
94D / 94F / 94M / 96M - 2016 1 Meter Runs MBL 500 Application Meter runs combine inlet and outlet piping with a flow element which is used for flow measurement of one-phase aggressive and non-aggressive
More informationV January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell
V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/2017/50 Distr.: General 23 December 2016 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationREBATE APPLICATION. 1. Rebate Applicant Information. 2. Dealer Information OKLAHOMA NATURAL GAS COMPRESSED NATURAL GAS (CNG)
OKLAHOMA NATURAL GAS COMPRESSED NATURAL GAS (CNG) REBATE APPLICATION 1. Rebate Applicant Information Application is required for each requested rebate: Applicant Name: (as it appears on account, if Oklahoma
More informationTHIS BULLETIN MODIFIES THE A4A BULLETIN , DATED DECEMBER 11, 2017
Bulletin 2018.1 Update on ATA103 Requirements June 5, 2018 THIS BULLETIN MODIFIES THE A4A BULLETIN 2017.2, DATED DECEMBER 11, 2017 Based on feedback from the industry, A4A is modifying the deadlines for
More informationSafety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
More informationP R O D U C T S PRODUCTS OUR PRODUCT LINE RANGES FROM:
Capabilities P R O D U C T S PRODUCTS American Crane is recognized as a leader in the design and manufacture of electric overhead traveling cranes and wire rope hoists, offering equipment up to 1,000 ton
More informationNortheastern Rural Electric Membership Corporation Schedule DG-2 Columbia City, Indiana Page 1 of 5
Columbia City, Indiana Page 1 of 5 SCHEDULE DG-2 LARGE POWER DISTRIBUTED GENERATION I. AVAILABILITY This Distributed Generation Rate is available to any member in good standing of Northeastern REMC (Northeastern)
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
More informationCapacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
More informationTanks: Informal Working Group on the inspection and certification of tanks
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods Joint Meeting of the RID Committee of Experts and the Working Party on the Transport of Dangerous
More information