Electron Positron Proton Spectrometer for use at Laboratory for Laser Energetics
|
|
- Cordelia Hensley
- 6 years ago
- Views:
Transcription
1 LLNL-TR Electron Positron Proton Spectrometer for use at Laboratory for Laser Energetics S. L. Ayers April 13, 2010
2 Disclaimer This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.
3 EDSN AA Page 1 of 51 Engineering Directorate Safety Note Electron Positron Proton Spectrometer for use at LLE EDSN AA Prepared by: Date: Shannon Ayers Mechanical Engineer Applied Physics Division Reviewed by: Date: Robert Murray Civil Engineer Laser Systems Engineering and Operations Division Reviewed by: Date: Allen House Responsible Individual National Security Engineering Division Approved by: Date: Joel Bowers Division Leader Technology Resource Engineering Division Distribution: Allen Elsholz Allen House Joel Bowers Scott Winters Bob Murray (L-340) (L-168) (L-113) (L-447) (L-113) Bob Heeter (L-472) LSEO Office (L-447) Riccardo Tommasini (L-399) Document Approval and ECMS Proxy Authorization Your signature acknowledges that you have read and approved the contents of EDSN AA, Electron Positron Proton Spectrometer for use at LLE. Furthermore, your signature authorizes Tonya Dye of the Laser Systems Engineering and Operations Division of the Engineering Directorate as your proxy for ECMS record approval of this document. If proxy is not authorized, you must approve this document electronically in ECMS.
4 EDSN AA Page 2 of 51 Table of Contents Section A Scope and Equipment (or System) Description... 3 Section B Operational Hazards... 4 Section C Operational Procedure... 4 Section D Design Calculations... 4 Section E - Testing Requirements... 8 Section F Labeling Requirements... 8 Section G Associated Procedures... 8 Section H References... 8 Appendix A Calculations... 9 Appendix B Counter Weight Appendix C EPPS Drawings... 36
5 EDSN AA Page 3 of 51 Section A Scope and Equipment (or System) Description The Electron Positron Proton Spectrometer (EPPS) is mounted in a TIM (Ten-Inch Manipulator) system on the Omega-60 or Omega-EP laser facilities at the University of Rochester, Laboratory for Laser Energetics (LLE), when in use, see Fig. 1. The Spectrometer assembly, shown in Fig. 2, is constructed of a steel box containing magnets, surrounded by Lead 6% Antimony shielding with SS threaded insert, sitting on an Aluminum 6061-T6 plate. Fig. 1. The EPPS with TIM interface Fig. 2. The EPPS assembly To meet LLE TIM moment loading requirements, a counter-weight is added when the diagnostic is mounted in the TIM, see Fig. 3. For moving the diagnostic a two person lifting handle is used, see Fig. 4. Fig. 3. The EPPS with counter weight and pointer, mount in TIM Boat Fig. 4. The EPPS with TIM interface and lifting handle
6 EDSN AA Page 4 of 51 Section B Operational Hazards Failure of the EPPS device or device mechanical support components could cause injury to personnel, damage to equipment, and may have significant impact on programmatic schedule and cost. There are no electrical hazards in the EPPS device. Section C Operational Procedure Use of the EPPS at LLE is governed by LLE procedure D-TX-P-016. Section D Design Calculations The analyses of the EPPS as compiled in this safety note can be split up into the following subsystems: The TIM Interface, the EPPS and TIM Mounting Interface, and the EPP Spectrometer Assembly. Each of these subsystems contains numerous load path elements as enumerated in Fig. 5 and Table 1. Fig. 5a. EPPS Load Path elements. Fig. 5b. EPPS Load Path elements, sectioned side view of spectrometer.
7 EDSN AA Page 5 of 51 Table 1: Load path elements. 1 TIM Mounting Rail (Left mounting rail, TIM mounting) to TIM Boat Fourteen SS fasteners 2 TIM Mounting Rail to TIM Mounting Frame (Arm, Twelve SS TIM mounting) fasteners 3 TIM Mounting Frame (Arm, TIM mounting) to Support Six SS Plate (Support plate TIM mounting) fasteners 4 Support Plate (Support plate TIM mounting) to Side Four SS Plate fasteners 5 Hoist Ring to Lifting Bracket One ½ -13 fastener 6 Lifting Bracket to Side Plate Four SS fasteners 7 Lifting Handle to Lifting Bracket Two 3/8-16 SS fasteners App. A App. A App. A App. A App. A App. A App. A The TIM boat structure is outside of the scope of this safety note. This safety note includes everything from the mounting to the TIM boat to the spectrometer. The following table lists the factors of safety for each load path item: Table 2: Factors of safety for the EPPS. Configurations Stress Yield (ksi) Stress (ksi) 1.1 TIM Rail/ TIM Boat Bolt Stress, von Mises 1.2 TIM Rail/ TIM Boat Tapped Holes, Shear 1.1a TIM Rail/ TIM Boat Bolt Stress, von Mises 2.1 TIM Frame/ TIM Rail Bolt Stress, von Mises 2.2 TIM Frame/ TIM Rail Tapped Holes, Shear 2.1a TIM Frame/ TIM Rail Bolt Stress, von Mises 3.1 TIM Frame/ Support Plate Bolt Stress, von Mises 3.2 TIM Frame/ Support Plate Tapped Holes, Shear Ultimate Stress (ksi) Safety Factor (yield) Safety Factor (Ult) Required Safety Factor* SY SY SSY SY SY SSY SY SY
8 EDSN AA Page 6 of 51 Configurations Stress (ksi) Yield Stress (ksi) Ultimate Stress (ksi) Safety Factor (yield) 3.1a TIM Frame/ Support Plate Bolt Stress, von Mises 4.2 TIM Plate/ Side Plate Tapped Holes, Shear 4.1a TIM Plate/ Side Plate Bolt Stress, von Mises 5.1 Hoist Ring/ Lifting Bracket Tapped Holes, Shear 5.1 Hoist Ring/ Lifting Bracket Tapped Holes, Shear 6.1 Lifting Bracket/ Side Plate Bolt Stress, von Mises 6.2 Lifting Bracket/ Side Plate Tapped Holes, Shear 7.1 Lifting Handle/ Lifting Plate Bolt Stress, von Mises 7.2 Lifting Handle/ Lifting Plate Tapped Holes, Shear * SY=Static Yield, SU=Static Ultimate, SSY=Static+Seismic Yield, SSU=Static+Seismic Ultimate Safety Factor (Ult) Required Safety Factor* SSY SY SSY SY SU SY SY SY SY
9 EDSN AA Page 7 of 51 1) The mounting rails are connected to the TIM boat (the TIM boat is LLE equipment) using stainless steel fasteners and helicoil inserts. The fasteners will be analyzed under both static and seismic loading conditions. The two horizontal and one vertical seismic forces will be assumed to occur simultaneously, acting through the center of gravity of the equipment, and will be combined to calculate seismic response values. Conservatively, only two of the fasteners will be used in the calculations. No information is known about the inserts in the TIM Boat, therefore the thread shear will be calculated based on a thread directly into aluminum (building additional conservatism into the calculations). 2) The mounting rails are connected to the TIM mounting frame using stainless steel fasteners and helicoil inserts. The fasteners will be analyzed under both static and seismic loading conditions. The two horizontal and one vertical seismic forces will be assumed to occur simultaneously, acting through the center of gravity of the equipment, and will be combined to calculate seismic response values. Conservatively, only two of the fasteners will be used in the calculations. 3) The EPPS assembly is mounted to the Support plate, which is connected to the TIM mounting frame, using six fasteners. The fasteners are assembled through the TIM mounting plate and threaded into the TIM mounting frame. The two horizontal and one vertical seismic forces will be assumed to occur simultaneously, acting through the center of gravity of the equipment, and will be combined to calculate seismic response values. Conservatively, only two fasteners are used for tension calculations. 4) The EPPS is secured to the aluminum Support plate, using four fasteners. The fasteners are assembled through the support plate, through the lead shield and threaded into the steel side plate. The two horizontal and one vertical seismic forces will be assumed to occur simultaneously, acting through the center of gravity of the equipment, and will be combined to calculate seismic response values. 5) The EPP Spectrometer assembly is lifted by a single hoist ring threaded into a 304SS lifting bracket. 6) The lifting bracket is mounted to the EPPS, using four fasteners. The fasteners are assembled through lifting bracket, through the lead shield and threaded into the steel side plate. The two horizontal and one vertical seismic forces will be assumed to occur simultaneously, acting through the center of gravity of the equipment, and will be combined to calculate seismic response values. Conservatively, only two fasteners are used for tension calculations. 7) The EPP Spectrometer assembly is lifted by two people, using an aluminum handle. The handle is mounted to the stainless steel lifting bracket using two 3/8-16 fasteners.
10 EDSN AA Page 8 of 51 The following table lists the torque value for each fastener: Table 3: Torque values for the EPPS. Item # Screw Size Minimum Length of Thread Engagement Female Threads Recommended Torque (in-lbf) Al 6061-T6 w/ SS 13.5 Helicoil Inserts Al 6061-T6 w/ SS 13.5 Helicoil Inserts Al 6061-T A36 Steel A36 Steel / SS Section E - Testing Requirements No Testing Requirements. Section F Labeling Requirements The equipment needs to be labeled per the requirement in LLE Seismic Criteria NIF AC, with the EDSN number EDSN If labeling is not possible, the equipment must be bagged and tagged with the EDSN number EDSN The equipment needs to be labeled per the requirement in LLE Seismic Criteria NIF AC, For Use at LLE Only. If labeling is not possible, the equipment must be bagged and tagged with the message For Use at LLE Only. Section G Associated Procedures None Section H References 1. Engineering Design Safety Standards Manual, M-102, Lawrence Livermore National Laboratory, Recommended Seismic Criteria for LLNL Equipment Located at LLE, NIF AC, 12/18/2009
11 EDSN AA Page 9 of 51 Appendix A Calculations
12 EDSN AA Page 10 of 51
13 EDSN AA Page 11 of 51
14 EDSN AA Page 12 of 51
15 EDSN AA Page 13 of 51
16 EDSN AA Page 14 of 51
17 EDSN AA Page 15 of 51
18 EDSN AA Page 16 of 51
19 EDSN AA Page 17 of 51
20 EDSN AA Page 18 of 51
21 EDSN AA Page 19 of 51
22 EDSN AA Page 20 of 51
23 EDSN AA Page 21 of 51
24 EDSN AA Page 22 of 51
25 EDSN AA Page 23 of 51
26 EDSN AA Page 24 of 51
27 EDSN AA Page 25 of 51
28 EDSN AA Page 26 of 51
29 EDSN AA Page 27 of 51
30 EDSN AA Page 28 of 51
31 EDSN AA Page 29 of 51
32 EDSN AA Page 30 of 51
33 EDSN AA Page 31 of 51
34 EDSN AA Page 32 of 51
35 EDSN AA Page 33 of 51 Appendix B Counter Weight The EPPS Counter weight is shown in figure B-1. Fig. B-1. EPPS installed in TIM Boat, with Counter Weight.
36 EDSN AA Page 34 of 51
37 EDSN AA Page 35 of 51
38 EDSN AA Page 36 of 51 Appendix C EPPS Drawings
39 EDSN AA Page 37 of 51
40 EDSN AA Page 38 of 51
41 EDSN AA Page 39 of 51
42 EDSN AA Page 40 of 51
43 EDSN AA Page 41 of 51
44 EDSN AA Page 42 of 51
45 EDSN AA Page 43 of 51
46 EDSN AA Page 44 of 51
47 EDSN AA Page 45 of 51
48 EDSN AA Page 46 of 51
49 EDSN AA Page 47 of 51
50 EDSN AA Page 48 of 51
51 EDSN AA Page 49 of 51
52 EDSN AA Page 50 of 51
53 EDSN AA Page 51 of 51
Multi-Stage Selective Catalytic Reduction of NO in Lean-Burn Engine Exhaust. B. M. Penetrante M. C. Hsiao B. T. Merritt G. E.
UCRL-JC-128071 PREPRINT Multi-Stage Selective Catalytic Reduction of in Lean-Burn Engine Exhaust x B. M. Penetrante M. C. Hsiao B. T. Merritt G. E. Vogtlin This paper was prepared for submittal to the
More informationTANK RISER SUSPENSION SYSTEM CONCEPTUAL DESIGN (U)
Revision 0 TANK RISER SUSPENSION SYSTEM CONCEPTUAL DESIGN (U) R. F. Fogle September 15, 2002 Westinghouse Savannah River Company LLC Savannah River Site Aiken, South Carolina 29802 This document was prepared
More informationREPORT ON TOYOTA/PRIUS MOTOR DESIGN AND MANUFACTURING ASSESSMENT
ORNL/TM-2004/137 REPORT ON TOYOTA/PRIUS MOTOR DESIGN AND MANUFACTURING ASSESSMENT J. S. Hsu C. W. Ayers C. L. Coomer Oak Ridge National Laboratory This report was prepared as an account of work sponsored
More informationGlendale Water & Power Smart Grid Project
Glendale Water & Power Smart Grid Project Key Dates in Project History Key Dates Project History On July 10, 2007, City Council directed GWP to develop a long term plan for smart meters On October 23,
More informationTest Rig Design for Large Supercritical CO 2 Turbine Seals
Test Rig Design for Large Supercritical CO 2 Turbine Seals Presented by: Aaron Rimpel Southwest Research Institute San Antonio, TX The 6th International Supercritical CO 2 Power Cycles Symposium March
More informationUtilization of Associated Gas to Power Drilling Rigs A Demonstration in the Bakken
Utilization of Associated Gas to Power Drilling Rigs A Demonstration in the Bakken Bakken Artificial Lift and Production Denver, Colorado September 24 25, 2013 Chad Wocken*, John Harju, Grant Dunham, and
More informationThe Realities of Consumer-Owned Wind Power For Rural Electric Co-operatives
The Realities of Consumer-Owned Wind Power For Rural Electric Co-operatives Steve Lindenberg U.S. Department of Energy Jim Green National Renewable Energy Laboratory WINDPOWER 2006 Pittsburgh, June 4-8,
More informationA Study of Lead-Acid Battery Efficiency Near Top-of-Charge and the Impact on PV System Design
A Study of Lead-Acid Battery Efficiency Near Top-of-Charge and the Impact on PV System Design John W. Stevens and Garth P. Corey Sandia National Laboratories, Photovoltaic System Applications Department
More information4lliedSig nal. Development of a Digital Control Unit to Displace Diesel Fuel With Natural Gas. Federal Manufacturing & Tech nolog ies. A. D.
Development of a Digital Control Unit to Displace Diesel Fuel With Natural Gas Federal Manufacturing & Tech nolog ies A. D. Talbott KCP-613-5913 I Published March 1997 Final ReporVProject Accomplishments
More informationSacramento Municipal Utility District s EV Innovators Pilot
Sacramento Municipal Utility District s EV Innovators Pilot Lupe Jimenez November 20, 2013 Powering forward. Together. Agenda SMUD Snapshot Pilot Plan v Background v At-a-Glance v Pilot Schedule Treatment
More informationBuilding Blocks and Opportunities for Power Electronics Integration
Building Blocks and Opportunities for Power Electronics Integration Ralph S. Taylor APEC 2011 March 8, 2011 What's Driving Automotive Power Electronics? Across the globe, vehicle manufacturers are committing
More informationWaste Heat Recuperation for Passenger Vehicles
Waste Heat Recuperation for Passenger Vehicles Jim Salvador james.salvador@gm.com Outline Brief Introduction to Thermoelectric Technology. Thermoelectric Generator System Basics. Future Research and Development
More informationDetermination of Spring Modulus for Several Types of Elastomeric Materials (O-rings) and Establishment of an Open Database For Seals*
Determination of Spring Modulus for Several Types of Elastomeric Materials (O-rings) and Establishment of an Open Database For Seals* W. M. McMurtry and G. F. Hohnstreiter Sandia National Laboratories,
More informationMASTER \ C. Idaho National Engineering Laboratory. INEL 96J014t we.l~%/0o/60 PREPRINT. MOTOR-OPERATOR GEARBOX EFFICIENCY 5 i u.
INEL 96J014t we.l~%/0o/60 PREPRINT \ C Idaho National Engineering Laboratory MOTOR-OPERATOR GEARBOX EFFICIENCY 5 i u.^ 1 Q Kevin G. DeWall, John C. Watkins, Donovan Bramwell The Fourth NRC/ASME Symposium
More informationTHE ALTERNATIVE FUEL PRICE REPORT
THE ALTERNATIVE FUEL PRICE REPORT Alternative Fuel Prices Across the Nation August 8, 2002 T his is the seventh issue of the Clean Cities Alternative Fuel Price Report, a quarterly newsletter keeping you
More informationHybrid Electric Vehicle End-of-Life Testing On Honda Insights, Honda Gen I Civics and Toyota Gen I Priuses
INL/EXT-06-01262 U.S. Department of Energy FreedomCAR & Vehicle Technologies Program Hybrid Electric Vehicle End-of-Life Testing On Honda Insights, Honda Gen I Civics and Toyota Gen I Priuses TECHNICAL
More informationMODERN GRID S T R A T E G Y
Smart Grid Concepts U.S. Commercial Service Webinar Joe Miller Modern Grid Strategy Team Lead September 16, 2009 Funded by the U.S. Department of Energy, Conducted by the National Energy Technology Laboratory
More informationDOUBLE ROW LOOP-COILCONFIGURATION FOR HIGH-SPEED ELECTRODYNAMIC MAGLEV SUSPENSION, GUIDANCE, PROPULSION AND GUIDEWAY DIRECTIONAL SWITCHING
DOUBLE ROW LOOP-COILCONFIGURATION FOR HIGH-SPEED ELECTRODYNAMIC MAGLEV SUSPENSION, GUIDANCE, PROPULSION AND GUIDEWAY DIRECTIONAL SWITCHING Jianliang He and Donald M Rote DISCLAIMER 0 OD cv This report
More informationGA A23904 RESEARCH ACTIVITIES AT GENERAL ATOMICS
GA A23904 RESEARCH ACTIVITIES AT GENERAL ATOMICS by E.M. Campbell and K.R. Schultz JANUARY 2002 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government.
More informationEnhanced Gas-Filled Capabilities for Ten-Inch Manipulator Based Target Positioners
Enhanced Gas-Filled Capabilities for Ten-Inch Manipulator Based Target Positioners D. MASTROSIMONE, A. AGLIATA, T. BUCZEK, D. J. LONOBILE, M. J. SHOUP III, and C. SORCE University of Rochester, Laboratory
More informationReal Time Applications Using Linear State Estimation Technology (RTA/LSE)
DOE/OE Transmission Reliability Program Real Time Applications Using Linear State Estimation Technology (RTA/LSE) DOE Grant Award #DE-OE0000849 Ken Martin & Lin Zhang, Principal Investigators Electric
More informationJerry Shoemaker Manager, Smart Grid PMO February 20, 2014
PHI s Smart Grid Program Management Approach Lessons Learned Jerry Shoemaker Manager, Smart Grid PMO February 20, 2014 2 Acknowledgement "This material is based upon work supported by the Department of
More informationBLOCKING DIODES AND FUSES IN LOW-VOLTAGE PV SYSTEMS
BLOCKING DIODES AND FUSES IN LOW-VOLTAGE PV SYSTEMS John C. Wiles, Southwest Technology Development Institute, New Mexico State University, Las Cruces, NM 88003 David L. King, Photovoltaic Systems R&D,
More informationHurricane Andrew Photovoltaic Traffic Control Relief Preliminary Report
Hurricane Andrew Photovoltaic Traffic Control Relief Preliminary Report Author William R. Young, Jr. Publication Number FSEC-CR-550-92 Copyright Copyright Florida Solar Energy Center/University of Central
More informationProduction Summary for Extended Barrel Module Fabrication at Argonne for the ATLAS Tile Calorimeter
ANL-HEP-TR-07-68 Production Summary for Extended Barrel Module Fabrication at Argonne for the ATLAS Tile Calorimeter High Energy Physics Division About Argonne National Laboratory Argonne is a U.S. Department
More informationTerraPower s Molten Chloride Fast Reactor Program. August 7, 2017 ANS Utility Conference
TerraPower s Molten Chloride Fast Reactor Program August 7, 2017 ANS Utility Conference Molten Salt Reactor Features & Options Key Molten Salt Reactor (MSR) Distinguishing Features Rather than using solid
More informationMAST R OS71 NOV DOE/METC/C-96/7207. Combustion Oscillation: Chem,;a Purge Time. Contrc Showing Mechanistic.ink to Recirculation Zone
DOE/METC/C-96/727 Combustion Oscillation: Chem,;a Purge Time Contrc Showing Mechanistic.ink to Recirculation Zone Authors: R.S. Gemmen GA, Richards M.J. Yip T.S. Norton Conference Title: Eastern States
More informationModel-Based Integrated High Penetration Renewables Planning and Control Analysis
Model-Based Integrated High Penetration Renewables Planning and Control Analysis October 22, 2015 Steve Steffel, PEPCO Amrita Acharya-Menon, PEPCO Jason Bank, EDD SUNRISE Department of Energy Grant Model-Based
More informationAlternative Fuel Price Report
July 2016 Natural Gas Ethanol Propane Biodiesel CLEAN CITIES Alternative Fuel Price Report Welcome to the July 2016 issue! The Clean Cities Alternative Fuel Price Report is a quarterly report designed
More informationTHE IMPACT OF BIODIESEL FUEL BLENDS ON AFTERTREATMENT DEVICE PERFORMANCE IN LIGHT-DUTY VEHICLES
THE IMPACT OF BIODIESEL FUEL BLENDS ON AFTERTREATMENT DEVICE PERFORMANCE IN LIGHT-DUTY VEHICLES Matthew Thornton NREL, Marek Tatur and Dean Tomazic FEV Engine Technology Inc. National Biodiesel Conference
More informationExperience with Small Turbomachinery in a 400 Watt Refrigerator
Fermi National Accelerator Laboratory FERMILAB-Conf-96/290 Experience with Small Turbomachinery in a 400 Watt Refrigerator J.D. Fuerst Fermi National Accelerator Laboratory P.O. Box 500, Batavia, Illinois
More informationFood Service Technology Center
Food Service Technology Center Convotherm C4eT 6.20EB Electric Combination Oven Test Report Application of ASTM Standard Test Method F2861-10 May 2015 Prepared by: Denis Livchak Fisher-Nickel, Inc. Contributors:
More informationECH MIRROR INTERFACE TANK FOR 110 GHz, 1 MW GYROTRON
ECH MIRROR INTERFACE TANK FOR 110 GHz, 1 MW GYROTRON by R.C. O'NEILL, R.W. CALLIS, W.P. CARY, J.L. DOANE, R. GALLIX, T.R. HODAPP, J.M. LOHR, T.C. LUCE, and C.P. MOELLER OCTOBER 1995 DISCLAIMER This report
More informationA Modified Lower Hybrid Coupler for TPX.
A Modified Lower Hybrid Coupler for TPX. Stefan0 Bernabei, Paul Goranson *, Neve Greenough and David Swain *. Princeton Plasma Physics Laboratory, P.O.Box 451 Princeton, NJ. 08543 * Oak Ridge National
More informationCase Study of the Failure of two 13.8kV Control & Metering Transformers that caused significant Equipment Damage
LLNL-CONF-497353 Case Study of the Failure of two 13.8kV Control & Metering Transformers that caused significant Equipment Damage G. R. Dreifuerst, D. B. Chew, H. L. Mangonon, P. W. Swyers September 1,
More informationBorrego Springs Microgrid Demonstration Overview
Borrego Springs Microgrid Demonstration Overview Society of American Military Engineers San Diego, CA March 11, 2015 Neal Bartek Distributed Energy Resources Manager 2012 San Diego Gas & Electric Company.
More informationFood Service Technology Center
Food Service Technology Center Piper NAEB102 Electric Combination Oven Test Report Application of ASTM Standard Test Method F2861-10 November 2015 Prepared by: Michael Slater Fisher-Nickel, Inc. Prepared
More informationEXPERIMENTAL TARGET INJECTION AND TRACKING SYSTEM CONSTRUCTION AND SINGLE SHOT TESTING
GA A24432 EXPERIMENTAL TARGET INJECTION AND TRACKING SYSTEM CONSTRUCTION AND SINGLE SHOT TESTING by R.W. PETZOLDT, N.B. ALEXANDER, T.J. DRAKE, D.T. GOODIN, K. JONESTRACK, and B.A. VERMILLION MARCH 2004
More informationMechanical Integrity Issues of MCM-Cs for High Reliability Applications. Federal Manufacturing & Technologies. Howard Morgenstern, Tom Tarbutton, and
Mechanical Integrity Issues of MCM-Cs for High Reliability Applications Federal Manufacturing & Technologies Howard Morgenstern, Tom Tarbutton, and Gary Becka KCP-613-6020 Published April 1998 Approved
More informationAbstract. Background and Study Description
OG&E Smart Study TOGETHER: Technology-Enabled Dynamic Pricing Impact Evaluation Craig Williamson, Global Energy Partners, an EnerNOC Company, Denver, CO Katie Chiccarelli, OG&E, Oklahoma City, OK Abstract
More informationSFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines
SFI SPECIFICATION 1.2 EFFECTIVE: FEBRUARY 9, 2006* PRODUCT: Multiple Disc Clutch Assemblies for Vehicles with Naturally Aspirated Engines 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes
More informationSFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies
SFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
More informationFood Service Technology Center
Food Service Technology Center Sapidus H2Oil UE-1100 (240V) Electric Fryer Test Report Application of ASTM Standard Test Method F1367-07 November 2015 Prepared by: Edward Ruan Fisher-Nickel, Inc. Contributors:
More informationSFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 *
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 * PRODUCT: Replacement Flywheels and Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
More information2011 NDIA GROUND VEHICLE SYSTEMS ENGINEERING AND TECHNOLOGY SYMPOSIUM POWER AND MOBILITY (P&M) MINI-SYMPOSIUM AUGUST 9-11 DEARBORN, MICHIGAN
211 NDIA GROUND VEHICLE SYSTEMS ENGINEERING AND TECHNOLOGY SYMPOSIUM POWER AND MOBILITY (P&M) MINI-SYMPOSIUM AUGUST 9-11 DEARBORN, MICHIGAN Electrode material enhancements for lead-acid batteries Dr. William
More informationDIVISION: METALS SECTION: COLD-FORMED METAL FRAMING REPORT HOLDER: WARE INDUSTRIES D/B/A MARINO\WARE
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3578 Reissued 0/206 This report is subject to renewal 0/208. DIVISION: 05 00 00 METALS SECTION:
More informationBAllistic SImulation Method for Lithium Ion Batteries(BASIMLIB) using Thick Shell Composites (TSC) in LS-DYNA
BAllistic SImulation Method for Lithium Ion Batteries() using Thick Shell Composites (TSC) in LS-DYNA DISCLAIMER: Reference herein to any specific commercial company, product, process, or service by trade
More informationFood Service Technology Center
Food Service Technology Center Baxter OV500G1-EE Gas Single Rack Oven Test Report Application of ASTM Standard Test Method F2093-11 March 2014 Prepared by: Michael Karsz Fisher-Nickel, Inc. Prepared for:
More informationFood Service Technology Center
Food Service Technology Center Frymaster BIELA214-2RCSD Electric Fryer Test Report Application of ASTM Standard Test Method F1361-07 September 2016 Prepared by: Edward Ruan Fisher-Nickel, Inc. Contributors:
More informationSession 8: Distributed Energy Resources Utility Concerns, Grid Impacts and Mitigation Strategies October 21, 2015 Santiago, Chile
Session 8: Distributed Energy Resources Utility Concerns, Grid Impacts and Mitigation Strategies October 21, 2015 Santiago, Chile Michael Coddington National Renewable Energy Laboratory Golden, Colorado,
More informationFisher 2052 Diaphragm Rotary Actuator
Instruction Manual 2052 Actuator Fisher 2052 Diaphragm Rotary Actuator Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 4 Installation... 4 Actuator Mounting and Changing
More informationREPORT NUMBER: 114-CAL SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION
REPORT NUMBER: 114-CAL-08-08 SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION SUZUKI MOTOR CORPORATION 2008 SUZUKI SX4 4-DOOR SEDAN NHTSA NUMBER: C80512 CALSPAN TEST
More informationSFI SPECIFICATION 34.1 EFFECTIVE: January 13, 2017*
SFI SPECIFICATION 34.1 EFFECTIVE: January 13, 2017* PRODUCT: Screw-Type Superchargers 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationINLINE MONITORING OF FREE WATER AND PARTICULATE CONTAMINATION OF JET A FUEL
INLINE MONITORING OF FREE WATER AND PARTICULATE CONTAMINATION OF JET A FUEL INTERIM REPORT TFLRF No. 466 ADA by Keri M. Petersen U.S. Army TARDEC Fuels and Lubricants Research Facility Southwest Research
More informationOMEGA and OMEGA EP Will Provide Key Physics Data for Laser IFE. J. M. Soures University of Rochester Laboratory for Laser Energetics
OMEGA and OMEGA EP Will Provide Key Physics Data for Laser IFE J. M. Soures University of Rochester Laboratory for Laser Energetics 2005 US-Japan Workshop on Laser IFE San Diego, CA 21 22 March 2005 Summary
More informationTEST REPORT. Test Report for Mating Cycle Validation of Mini Circuits QBL Series Quick-Lock Test Cables.
TITLE: Test Report for Mating Cycle Validation of Mini Circuits QBL Series Quick-Lock Test Cables. 1. Background & Introduction Mini-Circuits has introduced a QBL Series of test cables is based upon an
More informationREPORT NUMBER: 114-CAL SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION
REPORT NUMBER: 114-CAL-08-06 SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION FORD MOTOR COMPANY 2008 FORD RANGER REGULAR CAB PICKUP NHTSA NUMBER: C80205 CALSPAN TEST
More informationREPORT NUMBER: 114-CAL SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION
REPORT NUMBER: 114-CAL-08-02 SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION MAZDA MOTOR CORPORATION 2008 MAZDA CX-9 MPV NHTSA NUMBER: C85401 CALSPAN TEST NUMBER: 8858-F114-02
More informationINSTITUTE OF TECHNOLOGY
yc COMBUSTION ENGINES //L@%B\LUND INSTITUTE OF TECHNOLOGY - 7 Elliott P Levine U S Department of Energy Inventions and Innovations Division Energy Efficiency and Renewable Energy 1DO0 Independence Avenue
More informationSAFETY COMPLIANCE TESTING FOR FMVSS NO. 104 WINDSHIELD WIPING AND WASHING SYSTEMS
REPORT NUMBER 104-GTL-07-003 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 104 WINDSHIELD WIPING AND WASHING SYSTEMS HONDA MOTOR CO. 2007 HONDA FIT, PASSENGER CAR NHTSA NO. C75300 GENERAL TESTING LABORATORIES,
More informationSAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS
REPORT NUMBER 124-GTL-07-003 SAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS NISSAN MOTOR CO., LTD. 2007 NISSAN VERSA, 4-DOOR PASSENGER CAR NHTSA NO. C75201 GENERAL TESTING LABORATORIES,
More informationREPORT NUMBER: 114-CAL SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION
REPORT NUMBER: 114-CAL-08-07 SAFETY COMPLIANCE TESTING FOR FMVSS No. 114 THEFT PROTECTION AND ROLLOWAY PREVENTION GENERAL MOTORS CORPORATION 2008 CHEVROLET MALIBU HYBRID FOUR-DOOR SEDAN NHTSA NUMBER: C80110
More informationSAFETY COMPLIANCE TESTING FOR FMVSS NO. 104 WINDSHIELD WIPING AND WASHING SYSTEMS
REPORT NUMBER 104-GTL-07-002 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 104 WINDSHIELD WIPING AND WASHING SYSTEMS NISSAN MOTOR CO., LTD. 2007 NISSAN VERSA, PASSENGER CAR NHTSA NO. C75201 GENERAL TESTING LABORATORIES,
More informationBettis M11 Manual Hydraulic Override System Operating Instructions for HD, T, and G Series Pneumatic and Hydraulic Actuators
Instruction Manual D102755X012 March 2010 Bettis M11 Bettis M11 Manual Hydraulic Override System Operating Instructions for HD, T, and G Series Pneumatic and Hydraulic Actuators The following instruction
More informationIncreasing load transfer in bolted joints
Increasing load transfer in bolted joints with 3M Friction Shims January 2017 3M Advanced Materials Division Load transfer in bolted joints 1. Shear Joint: the applied loading is at right angles to the
More informationBelt Conveyors Separating Fact from Fiction Richard Enning Bob Schaefer Steve Timmer
1 Belt Conveyors Separating Fact from Fiction Richard Enning Bob Schaefer Steve Timmer The opinions of the contributors expressed herein do not necessarily state or reflect those of the International Carwash
More informationProject Title: Contract Number: Milestone Number: Report Date: Contract Contact: Phone: Congressional District: Executive Summary:
Project Title: 350 kw Target Midway Solar PV Project Contract Number: EP4-20 Milestone Number: 1 Report Date: 12/28/2016 Contract Contact: Brittany Stanton Phone: 612-696-0823 Congressional District: MN
More informationSupport and Infrastructure
Support and Infrastructure SoLID Director s Review Whit Seay February 23, 2014 SoLID Experimental Set-ups Design a system for mounting experimental apparatus that can be utilized by both set-ups. Integrate
More informationAlternative Energy, Hybrid and Electric Vehicle Programs in TARDEC Tactical Wheeled Vehicles Conference 6 February 2012
Alternative Energy, Hybrid and Electric Vehicle Programs in TARDEC Tactical Wheeled Vehicles Conference 6 February 2012 Dr. Grace M. Bochenek, Director Distribution A approved for Public Release; distribution
More informationEXPERIMENTAL TARGET INJECTION AND TRACKING SYSTEM CONSTRUCTION AND SINGLE SHOT TESTING
G A-A24432 EXPERIMENTAL TARGET INJECTION AND TRACKING SYSTEM CONSTRUCTION AND SINGLE SHOT TESTING by R.W. PETZOLDT, N.B. ALEXANDER, T.J. DRAKE, D.T. GOODIN, K. JONESTRACK, and B.A. VERMILLION MARCH 2004
More informationGENERAL TESTING LABORATORIES, INC LEEDSTOWN ROAD COLONIAL BEACH, VIRGINIA 22443
REPORT NUMBER 202a-GTL-10-004 SAFETY COMPLIANCE TESTING FOR S HEAD RESTRAINTS STATIC REQUIREMENTS VOLVO CAR CORPORATION 2010 VOLVO S40, PASSENGER CAR NHTSA NO. CA5900 GENERAL TESTING LABORATORIES, INC.
More informationMerv Eriksson Project Leader. Sharon Kosmalski Project Assistant. July 2006
James Scott Groenier Project Leader Merv Eriksson Project Leader Sharon Kosmalski Project Assistant USDA Forest Service Technology and Development Program Missoula, MT 7E72H69 FHWA Fiber-Reinforced Polymer
More informationEngineering Analysis. Team: 5 Guys Engineering + 1 Nathan Bessette, Rahul Bhatia, Andrew Cass, Glen Stewart
Engineering Analysis Presentation ME 4182 Team: 5 Guys Engineering + 1 Nathan Bessette, Rahul Bhatia, Andrew Cass, Zeeshan Saiyed, Glen Stewart YJ JChok Automatic Whiteboard Wiper Last Time Last Time Layout
More informationJAM 2 4 ~~~~~~~~~~~~~
a v Performance of Electric and Hybrid Vehicles at the American Tour de Sol Spencer Quong, Nicole LeBlanc, Carlos Buitrago, Michael Duoba, and Robert Larsen Argonne National Laboratory Center for Transportation
More informationJK Nebo Raised Rack Instructions
JK Nebo Raised Rack Instructions 1 Kit # 4722070 JK Nebo Raised Rack Kit (Silver) Kit # 4722075 JK Nebo Raised Rack Kit (Black) Important Notes: Prior to beginning this installation, read these instructions
More informationREPORT NUMBER: NCAP305I-MGA NEW CAR ASSESSMENT PROGRAM (NCAP) FMVSS No. 305 Indicant Test
REPORT NUMBER: NCAP305I-MGA-2012-008 NEW CAR ASSESSMENT PROGRAM (NCAP) FMVSS No. 305 Indicant Test GENERAL MOTORS LLC 2013 Chevrolet Malibu ECO4-Dr Hybrid Sedan NHTSA NUMBER: MD0101 MGA RESEARCH CORPORATION
More informationEXECUTIVE ORDER D Relating to Exemptions Under Section 27156
State of California AIR RESOURCES BOARD (Page 1 of 2) EXECUTIVE ORDER D 276 6 Relating to Exemptions Under Section 27156 of the Vehicle Code BORLA PERFORMANCE INDUSTRIES CHEVROLET\GMC EXHAUST HEADER SYSTEMS
More informationI. 22. Price. Technical Report Documentation Page
1. Report No. TX-00/1914-5 1 2. Government Accession No. 4. Title and Subtitle THE 1995 PERFORMANCE RESULTS FOR SLOPE PROTECTION PRODUCTS, HYDRAULIC MULCHES, AND FLEXIBLE CHANNEL LINERS Technical Report
More informationS-80,266. Oleg M. Kotlyar
.. MECHANICAL SEAL ASSEMBLY Oleg M. Kotlyar A7f3h13SSV 7WIS 7V31NVHC)3m IH3 WO 9W60. DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither
More informationSecond Quarterly Report. For the Period 1 January 1991 to 31 March 1991
STEAM PRETREATMENT FOR COAL LIQUEFACTION Second Quarterly Report For the Period 1 January 1991 to 31 March 1991 Robert A. Graff Valeria Balogh-Nair The City College of CUNY Office of Research Administration
More informationREPORT NO. TR-P NC SAFETY COMPLIANCE TESTING FOR FMVSS 223 REAR IMPACT GUARDS 2007 TRANSFREIGHT TECHNOLOGY NHTSA NO.
REPORT NO. SAFETY COMPLIANCE TESTING FOR FMVSS 223 REAR IMPACT GUARDS 2007 TRANSFREIGHT TECHNOLOGY NHTSA NO. RIG 009 PREPARED BY: KARCO ENGINEERING, LLC. 9270 HOLLY ROAD ADELANTO, CALIFORNIA 92301 SEPTEMBER
More informationM Series Manual Handwheel Gear Actuator
Instruction Manual M Series Actuator M Series Manual Handwheel Gear Actuator Contents Introduction............................... 1 Scope of Manual......................... 1 Description..............................
More informationCOMPLIANCE TESTING FOR FMVSS 207 SEATING SYSTEMS
REPORT NO. COMPLIANCE TESTING FOR FMVSS 207 SEATING SYSTEMS 2008 CHEVROLET IMPALA 4-DOOR NHTSA NO.C80102 PREPARED BY: KARCO ENGINEERING, LLC 9270 HOLLY ROAD ADELANTO, CALIFORNIA 92301 September 24, 2008
More information3NL-32 / 3NI-32 / 3PLN-32 ROOF DECK GRADE 50 STEEL
3NL-32 / 3NI-32 / 3PLN-32 ROOF DECK GRADE 50 STEEL 3NL-32 Used With Sidelap Screws 3NI-32 Used With TSWs or BPs 3PLN-32 Used With PunchLok II System Nominal Dimensions Nested Sidelap 3NL-32 Interlocking
More informationRECElVEp. Lubrication for High Load Duplex Bearings. Federal Manufacturing & Technologies. R. G. Steinhoff KCP Published August 1997
Lubrication for High Load Duplex Bearings Federal Manufacturing & Technologies R. G. Steinhoff RECElVEp KCP-613-5983 Published August 1997 Topical Report Approved for public release; distribution is unlimited..
More informationGUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007
GUIDELINE FOR GLOVEBOXES THIRD EDITION AGS-G001 February 2007 AMERICAN GLOVEBOX SOCIETY STANDARDS DEVELOPMENT COMMITTEE All Rights Reserved Copyright 2007 No portion may be duplicated without written consent
More informationSAFETY COMPLIANCE TESTING FOR FMVSS NO. 202 HEAD RESTRAINTS STATIC REQUIREMENTS
REPORT NUMBER 202-GTL-08-004 SAFETY COMPLIANCE TESTING FOR FMVSS NO. 202 HEAD RESTRAINTS STATIC REQUIREMENTS HYUNDAI MOTOR MANUFACTURING ALABAMA, LLC 2008 HYUNDAI SONATA, PASSENGER CAR NHTSA NO. C80507
More informationDAVIS POLICE DEPARTMENT
DAVIS POLICE DEPARTMENT EXTRA-DUTY AND OFF-DUTY EMPLOYMENT Policy and Procedure 1.05-A DEPARTMENT MANUAL Index as: Employment, extra duty Employment, off-duty Extra-duty employment Off-duty employment
More informationA Theoretical, Computational, and Experimental Analysis of an Interdigital Armature in a High Velocity Railgun
A Theoretical, Computational, and Experimental Analysis of an Interdigital Armature in a High Velocity Railgun Robert MacGregor and Sikhanda Satapathy August, 2002 Institute for Advanced Technology The
More informationSFI SPECIFICATION 18.1 EFFECTIVE: JUNE 17, 1999 *
SFI SPECIFICATION 18.1 EFFECTIVE: JUNE 17, 1999 * PRODUCT: Crankshaft Hub Harmonic Dampers 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for
More informationSAFETY COMPLIANCE TESTING FOR FMVSS 225 Child Restraint Anchorage Systems
FINAL REPORT NUMBER 225-MGA-06-002 SAFETY COMPLIANCE TESTING FOR FMVSS 225 GENERAL MOTORS CORPORATION 2006 HUMMER H3 NHTSA No. C60102 MGA RESEARCH CORPORATION 446 Executive Drive Troy, Michigan 48083 Test
More informationStructurlam Mass Timber Corporation Revised October 11, 2018
Structurlam CrossLam PR-L314C Structurlam Mass Timber Corporation Revised October 11, 2018 Products: Structurlam CrossLam Cross-Laminated Timber Structurlam Mass Timber Corporation 2176 Government Street
More informationAKM 345 Gen2. Instruction Manual. Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35. Document ID: IST EN
Instruction Manual AKM 345 Gen2 Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35 Document ID: IST-103-1-EN www.qualitrolcorp.com (IST-103-1-EN) Legal Information
More informationDIVISION: OPENINGS SECTION: UNIT SKYLIGHTS REPORT HOLDER: NATURAL LIGHT ENERGY SYSTEMS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3681 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 08 00
More informationSFI SPECIFICATION 28.3 EFFECTIVE: APRIL 21, 2014 *
SFI SPECIFICATION 28.3 EFFECTIVE: APRIL 21, 2014 * PRODUCT: Competition Fuel Cell Bladder 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for
More informationDIVISION: METALS SECTION: STEEL DECKING SECTION: STEEL FLOOR DECKING SECTION: STEEL ROOF DECKING REPORT HOLDER:
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-1735 Reissued 04/2015 This report is subject to renewal 03/2016 DIVISION: 05 00 00 METALS SECTION:
More informationPROCUREMENT SPECIFICATION FOR CNP19 CHERRY RIVETLESS NUT PLATE
PROCUREMENT SPECIFICATION NUMBER PRINTED COPIES OF THIS DOCUMENT ARE CONSIDERED REFERENCE UNLESS OTHERWISE STAMPED IN RED INK. PROCUREMENT SPECIFICATION FOR CNP19 CHERRY RIVETLESS NUT PLATE Authorizing
More informationSAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS
REPORT NUMBER 124-GTL-07-001 SAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS HYUNDAI MOTOR COMPANY 2007 HYUNDAI ELANTRA 4-DOOR PASSENGER CAR NHTSA NO. C70502 GENERAL TESTING LABORATORIES,
More informationSoutheastern Regional Transmission Planning (SERTP)
Southeastern Regional Transmission Planning (SERTP) December 2014 Regional Transmission Planning Analyses I. Overview of Regional Analyses SERTP sponsors plan and expand the transmission system to reliably
More informationSAFETY COMPLIANCE TESTING FOR FMVSS 225 Child Restraint Anchorage Systems
FINAL REPORT NUMBER 225-MGA-10-003 SAFETY COMPLIANCE TESTING FOR FMVSS 225 NISSAN MOTORS 2010 NISSAN ROGUE NHTSA No. CA5202 MGA RESEARCH CORPORATION 446 Executive Drive Troy, Michigan 48083 Test Date:
More information