Screw compressor B 200 For liquids 120 to 180m 3 /hr

Transcription

1 SPEC SHEET E SECTION : 1401 Effective January 2010 Replaces : New Screw compressor B 200 For liquids 120 to 180m 3 /hr B L 700 to 1000 rpm B R 840 to 1200 rpm Dimensions : L 436 x H 215x l 133 mm Weight : 26,5 kg Gravity torque : under 50 Nm The solution for an optimum direct mounting 3 possibilities PF Option - PTO Flange PS Option - PTO Shaft HY Option - hydraulic Splined shaft for direct flange mounting on PTO Straight Keyed shaft for electric motor drive Femele spline shaft for hydraulic motor drive

2 Screw compressor B 200 Flow (m 3 /hr) / Power (kw) Suction : 1 atm, 20 C Flow measurement : ISO Speed (rpm) COMPRESSOR SPEED VERSION R L SUCTION FLOW m 3 /hr SUCTION FLOW RATE m3/h POWER kw 60 Torque / Pressure (Nm) ,5 1 1,5 2 2,5 EXHAUST EXHAUST PRESSURE PRESSURE bar (bar) BE 10385A 20/05/09 Pressure (bar)* VERSION R L * At full speed. Key : large 8 mm PS Option - PTO Shaft For flange SAE B (2 or 4 holes) 6 Trous / (Holes) Ø 10.2 cannelures / (Splines) ANSI B92-1a 7/8n SAE_16/32 Spline pitch 13 dents / (teeth) PF Option - PTO Flange HY Option - Hydraulic Mouvex reserves the right to modify the information and illustrations contained in this document without prior notice. This is a non-contractual document. 01/09 Printed in FRANCE by Filigrane 2010 Mouvex ZI la Plaine des Isles rue des Caillottes AUXERRE - FRANCE T F contact@mouvex.com Distributed by :

3 ENTERPRISE Series Vane Compressor for Liquids to 170 m 3 /h Spec Sheet E Section: 200 Effective: April 2014 Replaces: September 2010 Historical partner From the collaboration between HAMMOND and MOUVEX, the Enterprise series is the result of long experience that stands out today as the vane compressor of reference. Legendary robustness The body and rotor are contructed of hard-coated cast iron to withstand harsh environmental and operating conditions, with strength unmatched in the industry. Corrosion free The integral anticorrosion coating of the compressor and the check relief valve, combined with stainless steel flanges, guarantee peace of mind. E140 Vane Compressor Quality of the accessories The new, extra-long inlet connection kit allows for deporting the air filter and insures perfect waterproofing. E140: 1,000/1,750 rpm E170: 1,000/1,600 rpm E170 Vane Compressor Dimensions: L 490/570 x H 220 x l 220 mm L 19/23 x H 9 x l 9 in. Weight: 36 kg (79 lbs.) to 47 kg (104 lbs.) Enterprise Check Relief Valve

4 ENTERPRISE Series Vane Compressors for Liquids to 170 m 3 /h Technical Specifications E140 E170 Air Delivered m 3 /hr (CFM) 140 (82) 170 (102) Maximum Continuous Pressure bar-g (PSIG) 2.5 (36) 2.0 (29) Options and Accessories The Enterprise Series compressors are available in PTO or Hydraulic Motor drive versions. Accessories available include: Pressure 1500 rpm Kw (HP) Maximum 8.4 (11.3) 10.2 (13.7) Maximum Speed (rpm) 1,750 1,600 Discharge Weight E " NPT flange Compressor lbs. kg E " NPT flange E E Dimensions Compressor A B C in. mm in. mm in. mm E / / /8 454 E / /2 494 Enterprise Check and Relief Valve (Delivered with Enterprise Series) Suction Filter (optional) Inlet Connection Kit (Delivered with Enterprise Series) Option: Enterprise with Hydraulic motor drive adaptor (4³/4") (8¹¹/16") (8¹¹/16") (3¹/2") (6¹¹/16") Hydrive Hydraulic Cooler (optional) Distributed By: ZI la Plaine des Isles 2 rue des Caillottes F AUXERRE - FRANCE Tel: Fax: contact@mouvex.com Pump Solutions Group (PSG), a Dover Company MVX T-01 Mouvex reserves the right to modify the information and illustrations contained in this document without prior notice. This is a not-contractual document.

5 Spec Sheet E Section: Effective: Replaces: CC20 Eccentric Disc Pump Design Features and Benefits: Excellent self priming capacity, constant and smooth delivery, line stripping capability, small package size, lightweight, easy to install. The Mouvex CC20 pump is an excellent truck mounted solution to load and off-load tank trucks and transports. The unique, durable design allows for leak-free operation and consistent flow rates over time resulting in low life-cycle costs. Its multi-purpose application also enables it to be used as a base mounted unit. Application Collection and transfer of used oil/waste oil and used anti-freeze Operation Principle Eccentric Disc, positive displacement Installation Can be mounted in any position Drive Truck mounted PTO, hydraulic motor drive, or engine drive Base mounted electric motor or engine drive Flow Rate Up to 88 gpm (20 m3/h) 1001 September 2012 July 2011

6 CC20 Eccentric Disc Pump Description of Construction Options Standard construction: Cast iron piston and head, steel shaft Electric motor driven and ball bearings, bronze bushings, WNCN mechanical seal, Nitrile O-rings and bronze compensated relief valve Diesel engine driven Hydraulic motor drive Output shaft: Steel ball bearings Shaft seal: Mechanical (no packing gland) Relief valve: Adjustable built-in relief valve Delivered with 3 weld flanges Cast iron and steel construction Optional construction: Used oil and lubricants construction. This option is especially suited for the pumping of difficult products as well as the collection and transfer of waste oil and lubricants. Rotation Speed Flow Rate Maximum Pressure Viscosity Power Required rpm m3/h gpm bar psi cst ssu kw HP Distributed by: Printed in USA 2012 Mouvex Mouvex reserves the right to modify the information and illustrations contained in this document without prior notice. This is a not-contractual document. ZI la Plaine des Isles 2 rue des Caillottes F AUXERRE - FRANCE Tél : Fax: contact@mouvex.com

7 TECHNICAL DATA SHEET E CHAPTER: 100 Effective from: June 2009 Replaces: CCL 50i The Mouvex Food Transport solution BLK 4-T Positive Displacement Lobe Pump The new BLK 4-T lobe Pump takes over from the tireless CCL 50i. More compact it will be your best ally to satisfy the ever-increasing transport requirements. Reliable: The same key components of the former CCL50i are used in the BLK4T, the parts that created the like exclusive reputation. Shaft seal made of PTFE. Easy to clean in all circumstances, it is also easy to take apart in few seconds with usual tools and the lobe extractor supplied with each pump. The robust front cover seal remains in place, in the pump casing. Adaptable: Compact, easy to fit in narrow areas. Hollow shaft for hydraulic drive systems or standard shaft for electrical drive. Optional: heating jacket, on the front cover. Optional: internal relief valve. Reversible. Clean: High grade polished surface. Food grade lubricant in the gear box. Up to 42 m 3 /h - 7 bar

8 Dimensions Operating limits: SAE 6B 1 53,2 53,2 internal spline Flow rate 42 m 3 /h Speed 720 rpm Pressure 7 bar DIN-80 DIN Temperature 120 C 143,5 190 M Flow rate (m 3 /h) Flow rate graph (viscosity of 500 cst): Speed (rpm) Wet parts made of 316L stainless steel. Materials EPDM O rings, FDA type Shaft seal PTFE Shaft seal with 3 lip seals Standard connections DIN 80 and DIN 100 Rotor: Tri lobe Equipment Shaft 1 hollow SAE 6B Ø 1 Shaft 2 male output Ø 38 Heating jacket as an option Internal relief valve as an option Direction of rotation Reversible Mounting Horizontal or vertical Standard 3A compliant Weight 65 Kg Packages available Hydraulic drive: Electrical drive: Hydraulic motor: Inverter Speed variator Hydrive cooler Hydraulic pump ZI la Plaine des Isles rue des Caillottes AUXERRE - FRANCE T F contact@mouvex.com Votre Distributed distributeur by: :

9 TECHNICAL LEAFLET E RUBRIQUE : 1801 Valid since : July 2009 Remplaced : June 2006 Petroleum product transfer on tanker, the Mouvex solution. CC8 Vanes pump series The CC8 pump range has been a major player in the European market for many years. Universal joint driven SAFETY: ATEX certified pump with a temperature probe Integrated by-pass avoiding any over pressure The unused ended shaft is protected by a casing Universality: Compatible with diesel, heating oil, petrol, biodiesel, paraffin, kerosene, oil, heavy fuel, bitumen Compact and so fits in narrow spaces Double ended shaft facilitates the mounting depending on the rotation directions Broad flow range User Friendly: Silent Constant flow rate Drains the pipes Reliability: Its robust construction allows working in the heavy duty application of the road transports Up to 80 m 3 /h - 8 bar Hydraulic driven Diesel driven

10 Uses The CC8 pumps versions A & AP are designed for clean products at room temperature VERSION MODEL APPLICATION MAXIMUM VISCOSITY MAXIMUM TEMPERATURE CC8-40 CC8-50 Diesel, biodiesel A 40 cst CC8-65 heating oil, petrol, 70 C CC8-80 F kerosene, parrafin CC8-50 AP Oils 900 cst CC8-65 Dimensions Equipment TYPE DESCRIPTION Mechanical 4 bar spring Mechanical 8 bar spring By-Pass Pneumatic with spring Pneumatic without spring Steel Ø 91 Stainless steel Ø 91 Flanges Steel Ø 115 Cast iron type BSM bore G 2,5 Cast iron type BSM bore G 3 TYPE DESCRIPTION By-Pass Pneumatic with spring Flanges Steel Ø 115 E - by-pass setting J - space for head dismantling P - pump plate V - drain plug V1-V2 - pressure / vacuum take off

11 Flow rate in m 3 /h Material of construction MODEL MAXIMUM PRESSURE 8 BAR MAXIMUM PRESSURE 4 BAR SPEED (RPM) CC CC8-50 CC8-50AP CC8-65A CC8-65AP 2, CC8-80F CONSTRUCTION COMPONENT QUANTITY MATERIAL Casing & head 1, 2 cast iron Shaft 1 steel BASIS Rotor 1 cast iron Static seal - Nitrile Mechanical seal - FKM Mechanical seal 2 Carbon/SS A Vanes 6 TVR AP Vanes 12 TVP Pushrods 6 Hardened steel Examples AD truck with CC8-50 A Semi-trailor with CC8-65 A

12 The CC8 pump versions C & EP are designed for clean hot products, there are 2 versions VERSION MODEL APPLICATION MAXIMUM VISCOSITY (cst) MAXIMUM Depending on speed (rpm) TEMPERATURE In C C CC8-65 heavy fuel EP CC8-65 Bitumen Dimensions Equipment TYPE DESCRIPTION Construction C EP By-Pass Mechanical 4 bar spring Mechanical 8 bar spring Foot With or without Head With heating jacket Steel Ø 91 mm Stainless steel Ø 91 mm Flanges Steel Ø 115 mm V1-V2 - pressure/vacuum take off Cast iron type BSM Bore G 2,5 E - by-pass setting Cast iron type BSM J - space for dismantling Bore G 3 P - pump plate A - heating jacket ports Material of construction Flow rate in m 3 /h MODEL MAXIMUM PRESSURE 6 BAR CC8-65C CC8-65EP CONSTRUCTION COMPONENT QUANTITY MATERIAL Casing & head 1 Cast iron BASIS Shaft 1 Steel Rotor 1 Cast iron Mechanical seal 2 Bronze/Stainless steel C Mechanical seal - FKM Static seal - FKM Vanes 6 Bronze EP Mechanica seal - FKM - high temperature Static seal - FKM - high temperature Vanes 6 Special bronze Pushrods 3 Hardened steel Mouvex reserves the right to modify the information and illustrations contained in this document without prior notice. This is a not-contractual document. 05/2010. Printed in FRANCE by Italic Impressions Mouvex ZI la Plaine des Isles rue des Caillottes AUXERRE - FRANCE T F contact@mouvex.com Votre Distributed distributeur by: :

13 SPEC SHEET Section: 201 Effective: April 2009 Replaces: September 2006 TX, TXD & TXSD Series Sliding Vane Pumps Reliability Durable pumps for fast and quiet operation. Sliding vane design provides sustained performance and trouble free operation. Unique Features Adjustable relief valve protects pump from excessive pressure. Optional air operated relief valve offers easy hose and nozzle handling. T-type strainers are available to protect pumping systems from damage caused by welding slag and foreign matter in the piping and tanks. Sizing Options Available in 1.5, 2, 2.5, 3, and 4-inch port sizes with flow rates from 10 to 500 U.S. gallons (2 to 113 m 3 /h) and pressures up to 125 psi (8.6 bar). Applications Fuel oil delivery truck Fleet refueling Lube oil Aviation refuelers Transport of petro chemicals gasoline biofuels solvents and many more How Blackmer s sliding vane action works TXSD models are equipped with a nickel-plated relief valve ideal for handling solvents, and FKM elastomers that are compatible with all Biodiesel and Ethanol blends.

14 TX, TXD & TXSD Series Sliding Vane Pumps Performance Data Pump Model TX1.5 TX(S)D2 TX(S)D2.5 TX(S)D3 TX4 Rated Pump Speed gpm L/min ,911 1,533 m 3 /h hp kw * Appropriate capacities and horsepower (hp) are based on a 100 ssu (22 cp) fluid a 50 psi (3.4 bar) delivered pressure. Refer to Characteristic Curves for flow rates and torque requirements at other pressures and viscosities. Maximum Operating Limits Pump Model Nominal Flowrate Pump Speed Viscosity Differential Pressure Working Pressure Temperature gpm L/min. rpm ssu cp psi bar psi bar ºF ºC TX ,000 4, TX(S)D ,000 4, TX(S)D ,000 4, TX(S)D , ,000 4, TX , ,000 4, Dimensions Model A B D E G K M Q S T AA BB DD TT Approx. Wt. in /8 / / / /8 6 1 / / / /8 61 lbs. TX1.5 mm kg TX(S)D2 TX(S)D2.5 TX(S)D3 TX4 in. 1 1 / " HYD Motor Shaft 1" HYD Motor Shaft 1 / /4 3 1 /2 6 1 / / /8 3 7 /8 8 3 /4 8 5 / / / /8 70 lbs. mm kg in. 1 1 /8 1 /4 8 3 / / / / / / / / / /16 94 lbs. mm kg in. 1 1 /8 1 /4 9 5 /8 6 7 / /8 7 1 /4 5 3 / / / / / / / /8 152 lbs. mm kg in. 1 1 /2 3 / / /2 6 3 / /2 8 1 /2 6 3 /8 295 lbs. mm kg Pump Rotation Blackmer TX(S)D models are equipped with a double-ended drive shaft for either clockwise (RH) or counterclockwise (LH) rotation. Standard rotation for the TX1.5 is counterclockwise (LH) when viewed from the drive shaft. Standard rotation for the TX4 model is clockwise (RH). Options FKM or PTFE O-rings Me chanical seals with stainless steel stationary seats Laminate vanes Pneumatic relief valve Hydraulic Motor Adapters Strainers Printed in USA 2009 Blackmer Blackmer World Headquarters 1809 Century Avenue SW Grand Rapids, MI USA T F