Non-fusible. Non-fusible disconnect switches 16A 3150A, 600V. International acceptance. Disconnect switches. Non-fusible

Transcription

1 Disconnect disconnect 1A 1A, 0V Disconnect ABB SwitchLine includes 1 different amperage sizes from 1A to 1A. The basic construction provides flexibility, safety, and high performance in an extremely compact size. ABB SwitchLine is a perfect choice for all switching applications from industrial motor control to construction safety. International acceptance UL listed, CSA approved, IEC rated, CE marked, and most other international standards. UL98 (CSA 22.2 No.4) UL File # E101914, CSA File #LR577 For OT0, OT, OT, OT1, OT0, OT0, OT0, OETLNF0 OETLNF00, OH_ pistol grip handles Suitable for use as motor disconnects or industrial control panel disconnects on service entrance equipment, panelboards, switchboards, industrial control equipment, motor control centers, etc. and are horsepower rated and ampere rated. UL8 (CSA 22.2 No. 14) UL File # E822, CSA File #LR58247 For OT1 OT, OH_ selector handles Suitable for use in equipment or machinery as motor controllers & motor disconnects and are horsepower and ampere rated. IEC Tested in accordance to IEC 9471 and, IEC 4, IEC 29, and IEC 4 CE Compliance with the European Machine Directive IEC 4 (EN 4)

2 General information Selection guide OT1F OT1E OT1F OTF OTF OTF OTF OT0F OTF OTF pole OT1F OTF OTF OTF OTF OT0F OTF OTF General purpose A 1 0 Approvals 1 2 pole N/A N/A N/A N/A N/A N/A N/A N/A pole UL8 UL8 UL8 UL8 UL8 UL98 UL98 UL98 4 pole UL8 UL8 UL8 UL8 UL8 UL98 UL98 UL98 Technical ratings UL,CSA 2 Max operating voltage V Max horsepower rating Three phase 2V HP V HP V HP Single phase 1V HP V HP Technical ratings IEC 2 Rated insulation and operational voltage. AC and DC V Rated thermal current, I th AC /DC open A AC /DC enclosed A AC 21A 0V A V A 1 2 Rated operational power AC2 0/415V kw V kw Physical characteristics pole lb Dimension pole H in W in D in Accessories Terminal lug kit Integral Integral Integral Integral Integral Integral Integral Integral Terminal shroud Auxiliary contact Shaft/handle diameter mm mm mm mm mm mm mm mm.24" x.24".24" x.24".24" x.24".24" x.24".24" x.24".24" x.24".24" x.24".24" x.24" Handle UL/NEMA type Type 1, R, 12 Type 1, R, 4, 4X, 12 Handle type Selector Pistol Recommended pistol handle length 45 5mm 45 5mm 45 5mm 45 5mm 45 5mm 45 5mm 45 5mm 45 5mm Maximum recommended shaft length 290mm 290mm 290mm 290mm 290mm 290mm 290mm 290mm Conversion kits pole Transfer Bypass Mechanical interlock Electrical interlock = Available = Not available 1 UL listed are also CSA approved. 2 For complete technical information please see page Switch only..2 1SXU00002C02 ABB Inc.

3 General information Selection guide OT0 OT0 & OETLNF0A OETLNF1 Disconnect OT0U0 OT0U0 OT0U0 OETLNF0ASW OETLNF10SW OETLNF10SW OETLNF00SW OETLNF1SW pole OT0U0 OT0U0 OT0U0 OETLNF0A OETLNF10 OETLNF10 OETLNF00 OETLNF1 General purpose A Approvals 1 2 pole N/A N/A UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC pole UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC UL98 & IEC IEC 4 pole UL98 & IEC UL98 & IEC UL98 & IEC IEC IEC IEC IEC IEC Technical ratings UL,CSA 2 Max operating voltage V Max horsepower rating Three phase 2V HP V HP V HP Single phase 1V HP 2V HP Technical ratings IEC 2 Rated insulation and operational voltage. AC and DC V Rated thermal current, I th AC /DC open A AC /DC enclosed A AC 21A 0V A V A Rated operational power AC2 0/415V kw V kw Physical characteristics pole lb Dimension pole H in W in D in Accessories Terminal lug kit OZXA0 OZXA0 OZXA0 OZXA0 OZXA28 OZXA28 OZXA28/2 OZXA28/2 Terminal shroud Auxiliary contact Shaft/handle diameter mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm.24" x.24".47" x.47".47" x.47".47" x.47".47" x.47".47" x.47".47" x.47".47" x.47" Handle UL/NEMA type Type 1, R, 12 Type 1, R, 4, 4X, 12 Handle type Pistol Selector Recommended pistol handle length 5 mm 1 175mm 1 175mm 1 175mm 1 175mm 1 175mm 1 175mm 1 175mm Maximum recommended shaft length 290mm 595mm 595mm 595mm 595mm 595mm 595mm 595mm Conversion kits pole Transfer Bypass Mechanical interlock Electrical interlock S = Standard feature = Available = Not available 1 UL listed are also CSA approved. 2 For complete technical information please see page Switch only 4 IEC 947 Utilization Category B, Infrequent operation 1SXU00002C02

4 Selection information Standard part designation 1 NonFusible OT Switches (1 to 1A) OT 1 F C Amperage 1 = 1 amps* = amps* = amps = amps* = amps* = amps = amps* 0 = 0 amps 1 = 1 amps Number of Poles = poles 4 = 4 poles = poles Special Configuration C = Double throw switch * UL8 listed. OT0_, OT_, OT_, and OT1_ are cul98 listed NonFusible OT Switches (0A and above) OT 0 U 0 C Amperage 0 = 0 amps 0 = 0 amps 0 = 0 amps Number of Poles & Placement of Mechanism 02 = 2 poles to right of mechanism 04 = 4 poles to right of mechanism 0 = poles to right of mechanism = 4 poles to left of mechanism 0 = poles to left of mechanism 22 = 2 poles to left, 2 poles to right of mechanism 12 = 1 pole to left, 2 poles to right of mechanism 1 = 1 pole to left, poles to right of mechanism Special Configuration C = Double throw switch All OT0_, 0_, and 0_ are cul98 listed. Selector Handles OHB S 1 P H Handle Color B = black Y = Red/Yellow Physical Size Connection to Switch A = external shaft P = snap on R = screw Protection Class H = 1 J= 1, R, 12 Pistol Handles O H B 5 J E011 Handle Color B = Black Y = Red/Yellow M = Stainless Steel Handle Length 5 = 5mm = mm 1 = 1mm 145 = 145m 175 = 175mm 275 = 275mm Environmental Rating J = 1, R, 12 L = 1, R, 12, 4, 4X Shaft Diameter = mm 12 = 12mm Special Configuration E011 = position double throw handle 1 Part designation keys are provided for reference only. Not all variations or configurations are available..4 1SXU00002C02

5 Base & DIN rail mounted 1 1A 1A Disconnect For a complete assembly, please select one of each: 1 switch (pg..5) 1 handle (pg..) 1 shaft (pg..7) 1 terminal lug kit (pg..9) (Lug kits only necessary on 0A and above) OT0U0 + OXPX210 + OHBJ + OZXA0 UL only UL 8 UL 98 UL general purpose 0 0 IEC AC Pole Pole 4 Pole 2 Pole 0 ;2 OT0U02 $ OT0U02 1,2 0 0 OT0U02 2,000 OT1F OTF OTF OTF OTF OT0F OTF OTF OT0U0 OT0U0 OT0U12 OT0U0 OT0U0 OT0U12 OT0U0 OT0U0 OT0U12 $ ,4 1,4 1,4 2,0 2,0 2,0 OT0U04 OT0U OT0U22 OT0U04 OT0U OT0U22 OT0U04 OT0U OT0U22 $ ,0 1,0 1,0 2,0 2,0 2,0 OT1F OTF OTF OTF OTF OT0F OTF OTF 0 12 OETLNF0A2SW 2,0 OETLNF0ASW 4,0 OETLNF0A4SW 5, OETLNF102SW,0 OETLNF10SW,0 OETLNF104SW 8, OETLNF102SW 14,0 OETLNF10SW 1,0 OETLNF104SW, OETLNF002SW 15,0 OETLNF00SW 17,0 OETLNF004SW 21,0 1 4 OETLNF12SW 17,000 OETLNF1SW,900 OETLNF14SW 2,0 $ Bulk packed Pole, 0V Switches UL only UL8 UL98 UL general purpose 0 0 IEC AC Bulk pack Quantity OT1F/B OTF/B OTF/B OTF/B OTF/B OT0F/B OTF/B OTF/B Consult factory Consult factory 1 Above 1A, base mount with screws only. 2 A snap on fourth pole may be added on 11A. Reference pg..9. For a or 8 pole switch 0 amp and above, a conversion mechanism accessory kit can be used with two or 4 pole. Reference pg Vertical busbar provided as standard on OETLNF10OETLNF1. For alternate back or edgewise mounting busbar, reference pg..10. Discount schedule H1 [D1]: NF 1A A Discount schedule H2 [D2]: NF 1A 0A Discount schedule H [D]: NF 10A 1A 1SXU00002C02

6 Standard handles & shafts 12 OHBS2AJ1 OHB J OHY J YASDA8 OHM1L12 Selector handles for use with.24 x.24" (mm) OXSX_shafts UL/NEMA Type IEC type Color Marking Defeatable Padlockable (lbs) 0.09 OHBS1AH1 $ 22 1 IP54 Black O/I & Off/On 0.12 OHBSAH OHBS2AJ1 28 1, R, 12 IP5 Black O/I & Off/On 0.1 OHBS2AJ 0 Pistol handles for use with.24 x.24" (mm) OXPX_ shafts UL/NEMA Type IEC type Color Marking Length in/mm Defeatable Padlockable (lbs) 1, R, 12 IP5 Black O/I & Off/On 2./ OHB5J $.1/ 0.0 OHBJ 90 1, R, 12, 4, 4X IP Black O/I & Off/On 2./ OHB5L 1.1/ 0.0 OHBL 10 1, R, 12, 4, 4X IP 1L Stainless steel O/I & Off/On 2./5 1. OHM5L 7 1, R, 12 IP5 Black w/ 1 stainless hasp O/I & Off/On 2./5 0.1 OHB5JEH 2 1, R, 12, 4, 4X IP Black w/ 1 stainless hasp O/I & Off/On 2./5 0.1 OHB5LEH 290 Pistol handles for use with.47 x.47" (12mm) OXP12X_ shafts UL/NEMA Type IEC type Color Marking Length in/mm Defeatable Padlockable (lbs) 1, R, 12 IP5 Black O/I & Off/On 1, R, 12, 4, 4X IP Black O/I & Off/On. Discount schedule H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02 4.9/1 5.7/145.9/ OHB1J12 OHB145J12 OHB175J12 $ /1 0.9 OHB1L /145.9/ OHB145L12 OHB175L12 1, R, 12, 4, 4X IP Metal Off/On 8.7/2 1. YASDA , R, 12, 4, 4X IP 1L Stainless steel O/I & Off/On 4.9/1.9/ OHM1L12 OHM175L12 OHM275L , 1,0 1, R, 12 IP5 Black w/ 1 stainless hasp O/I & Off/On 4.9/ OHB1J12EH 2.9/ OHB175J12EH 0 1, R, 12, 4, 4X IP Black w/ 1 stainless hasp O/I & Off/On 4.9/ OHB1L12EH 0.9/ OHB175L12EH 90 Direct mount handle Description For use on Color Padlockable OT1 Mounts directly on switch. OHBS12 4 OT Black 0.05 $ 17 No shaft necessary OT0 OHBS2 4 Mounts directly on switch. OT1 Black 0.05 OHB1 22 No shaft necessary Up to padlocks in OFFposition, includes shaft and mechanism Mounts on shaft Switch 1 Red/Yellow handles are available by substituting the OHB prefix with OHY. 2 All handles are plastic unless otherwise noted as metal or stainless steel. Not recommended for use on OT0. 4 Suitable for & 4 pole versions only. Not for use with or 8 pole or double throw configurations. Recommended handles & shafts Shaft diameter Recommended standard pistol handle length Maximum recommended shaft length OT1 x mm.24 x.24" 45 5 mm 290 mm OT1 0 x mm.24 x.24" 5 mm 290 mm OT0 0 12x12 mm.47 x.47" mm 595 mm OETLNF0 1 12x12 mm.47 x.47" mm 595 mm OT0 Black 0.22 OTV2EK 105 OT0 Black 0.44 OTV0EK 10 OT0 Black 0. OTV0EK 155 OT0OETL NF0 Metal No 0.78 YASDA 155 OETLNF10OETLNF1 Metal No 0. YASDA

7 Standard handles & shafts OXSX OXX_ OXP12X_ Shafts for use with selector handles.24 x.24" (x mm) Maximum Mounting Depth (inches) 1 Shaft length (in/mm) OT1F, OTF, OTF OTF, OTF OT0F, OTF, OTF OH_1_ & OH OH_2_ OH_1_ & OH OH_2_ OH_2_./ OXSX85 $ 4 4.1/ OXSX / OXSX / OXSX10 7.1/ OXSX1 9.8/ OXSX2 12 1/ OXSX0 Shafts for use with pistol handles.24 x.24" (x mm) Shaft length (in/mm) Maximum Mounting Depth (inches) OT1F OTF OTFOTF OT0FOTF OT1E OT0 5.2/ OXPX10 $ / OXPX / OXPX / OXPX / OXPX / OXPX40 28 Shafts for use with pistol handles.47 x.47" (12x12 mm) Shaft length (in/mm) Maximum Mounting Depth (inches) OT0 OT0 OETLNF0 OETLNF10 OETLNF10OETLNF1 11.0/ OXP12X2 $ 12.8/ OXP12X 15./ OXP12X95 44./ OXP12X / OXP12X Mounting depth is distance from the outside of the door to the disconnect switch mounting plate. Shaft can be cut to desired length. Discount schedule H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02

8 Standard nonfusible accessories Base and DIN rail mounted (N)7 L4 N N N PE OT1E I ON (N)8 T4 N N N PE O OFF OEA28 OA1G Auxiliary contacts snapon mounting 1 Description For Use On AC Thermal AC rated voltage 1 N.O. OT1, OT OA1G10 $ 1 N.C. OT OA1G01 OT OAG01 1 N.O. & 1 N.C. OT OA2G11 Mounting Base required for OA2G11 on OT1 OT1 0.0 OAZX1 Module for auxiliary contacts OT OEA28 Auxiliary contacts top mounting Description For Use On AC Thermal AC rated voltage 1 N.O. OEZNP OBEA10 $ 28 1 N.C. OT OBEA N.O. gold plated 2 Mounting Base required for OBEA_ 1 pkg. of 10 blank ing labels for OBEA OEZNP1 & OT1 OBEA_ contacts used with OT1 OT1 OT OBEA10AU OBEA01AU 0.0 OEZNP1 OBEAZX10 OBEAZX OEZNP1 Auxiliary contacts front mounting 4 Description For Use On AC Thermal AC rated voltage 1 N.O. + 1 N.C OZXK1 $ 2 N.O. + 2 N.C OZXK2 170 OETLNF0 4 N.O. + 4 N.C OZXK through 2 N.O OZXK4 OETLNF1 4 N.O OZXK N.O OZXK Mounting & installation considerations OAZX1 OA2G11 OT1 OT1 OT00 OA1G10 (1 N.O.) mounts on right side of switch only OA1G01 (1 N.C.) mounts on left side of switch only OA2G11 (1 N.O. & 1 N.C.) mounts on left of right side of switch Maximum two contacts on each side of switch Accepts four contacts maximum Mounting base always required Maximum two side mounted contacts on each side of switch. One mounting base required for each side Maximum 8 auxiliary contact blocks with the OEA28 module Maximum 4 auxiliary contact blocks mounting under the mechanisms 1 UL file #E Type _AU for low energy applications. The contacts are gold plated, AC & DC ratings Maximum: A0 & P0; Minimum: 12V, 1mA; 5V; 2mA Numbering stickers required if several OBEA contacts are used in the same installation. 4 UL File #E5707 Discount schedule H [DH]: Handles, shafts, accessories & lug kits

9 Standard nonfusible accessories Base & DIN rail mounted Disconnect OTP_FP OZXA0 OZXA0 OTP_FP OTP_1FP OZXA27 OZXA2 Additional poles 1 Power poles Only one power pole per switch: mounts on left or right side of switch. (OTPSFPN1 mounts to left side only.) Description For use on Fourth Pole Latebreak/ earlymake OT1OT OT0OT OTOT OT 0.1 AC Thermal AC rated voltage 0 OTPSFPN1 OTPSFP OTPSFP OTPS1FP OT OTPS1EP OT1OT OT0OT OTOT OT 0.1 Terminal poles Switch accepts one terminal pole per side: mounts on left or right side of switch AC Thermal AC rated Description For use on voltage Solid neutral Detachable Neutral Ground Terminal OT1OT OTOT OT0OT OTPLFP OTPLFP OTPLFP OTPL1FP OTPNFP OTPNFP OTPN1FP $ OT OTPN1EP OT1OT OT0OT OTOT OT OT1OT OT0OT OTOT OT OTPDFP OTPDFP OTPDFP OTPD1FP OTPEFP OTPEFP OTPEFP OTPE1FP OT OTPE1EP Terminal lugs 2 For Use On Wire Size Wire Type Lugs/Kit (lbs) OT0 OT0 OT0 OETLNF0A OETLNF1010 #4 00 kcmil #4 00 kcmil () 14 AWG #2 0 kcmil #2 0 kcmil (2) #4 00 kcmil () #14 AWG (2) #2 0 kcmil (2) #2 0 kcmil (2) #2 0 kcmil (2) #2 0 cmil (8) 2/0 + (2) #2 0 kcmil (4) #2 0 kcmil (4) #2 0 kcmil (8) 2/0 + (2) #2 0 kcmil Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al OZXA0 OZXA0/ OZXAT OZXA0 OZXA0/P OZXA2 OZXA OZXA0 OZXA0/ OZXA0 OZXA0/P OZXA2 OZXA28 OZXA28/ OZXA2 $ $ , OETLNF001 (8) #2 0 kcmil Cu/Al OZXA28/2 2,000 OZXA175/0 OTS2G1S/ OTS2G1L/ Terminal shrouds Description For Use On pole includes one shroud for line or load side 4th pole includes one shroud for line or load side OT1OT OTOT OT0OT OTPSFPN1 OTPSFP OTPS1FP OTST OTST OTS1T OTST1 OTST1 OTS1T1 pole long type shrouds 0.2 OTS2G1L/ pole short type shrouds OTS2G1S/ OT0 4 pole long type shrouds 0.2 OTS2G1L/4 5 4 pole short type shrouds. OTS2G1S/4 5 pole includes one shroud for line or load side 4 pole includes one shroud for line or load side 4 OT0 OT0 OETLNF0A OETLNF OTS OTS OETLZX0A OETLZX119 $ OTST OTST OTS1T OTST1 OTST1 OTS1T1 1 Switches accept only one power pole or one terminal pole per side. Only one power pole per switch. 2 Lugs are integral to the switch for 11A. No separate lug kit accessory is required. A load side distribution lug eliminates the need to purchase, install and wire a separate distribution block. 4 For 4 pole shrouds, please consult factory. Discount schedule H [DH]: Handles, shafts, accessories & lug kits

10 Standard nonfusible accessories Base and DIN rail mounted OTZW8 I ON Conversion Mechanisms Mechanism Type For use on UL/Nema Type or 8 pole mechanisms Double throw mechanisms Bypass mechanisms Mechanical interlock mechanisms OT1 OT1 OT0 OT0 OETLNF OT OT0 2. 1, R, 12 1, R, 12, 4, 4X 1, R, 12 1, R, 12, 4, 4X OTZW8 OETLZK19 OESAZW2 OETLZW9 OESAZW1 OESAZW1X OTZW OTZWX $ OT0 OETLNF , R, 12, 4, 4X OETLZW12 5 OT1OT , R, 12 1, R, 12, 4, 4X OTZW17 OTZW17X OT , R, 12 OTZW2 9 OT0 OETLNF , R, 12, 4, 4X OETLZW1 5 OT1OT OT10 OT0 OETLNF0 OETLNF10 OETLNF OTZW24 OTZW10 OETLZW OETLZW OTZW17 OETLZW24 OTZW Miscellaneous Accessories & Replacement Parts Shaft Accessories Accessory Type Description For Use On Shaft Adapter Adapts one end of a mm shaft to 12mm (use with shaft extension coupler) mm shafts 0. OETLZK19 $ Shaft Extension Coupler Shaft Guide Joins two shafts together for applications where extended length is required Fits all pistol grip handles, mounts on the inside of the enclosure door with provided hardware mm shafts 12mm shafts OESAZX17 OETLZX95 5 pistol handles OHZX10 12 Busbar Connections Accessory Type Description For Use On Busbar Connections Vertical, back or edgewise mounting 1 OETLNF OETLZX115 OETLZX114 $,91 2,8 Locking Accessories Accessory Type Description For Use On Cam Attachment For Kirk Key, Castell, Low & Fletcher and Ronis interlock. For adapting to the interlock system. The interlock is not included. 12mm shafts 0.29 OETLZW5 $ 190 OETLZT_ Electrical Interlock = Coil Voltage Closed circuit principle for interlocking the switch movement. When the coil circuit is dead, Atypes cannot be operated to Oposition and Ltypes cannot be operated to ON or OFFposition. Coil voltages 110VAC, 2 VAC, 24VDC, 48VDC, VDC, 110VDC, 2VDC, P 15W U = Un (U = coil voltage, Un = nominal voltage) OETLNF0 1A 2.42 OETLZTA OETLZTL OETLZX115 OETLZX114 Replacement Parts Accessory Type Description For Use On Metal collar Replaces original black knob for locking shaft in place OT10 OTZS2 $ 1 Set Screw Set screw for use with knob or collar OT1 FLSWM5X8AX 2 OT0 FLSWM5XX 2 CYBY8998 OTZS2 1 Vertical busbar is provided as standard on OETLNF10 through OETLNF1..10 Discount schedule H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02 ABB Inc

11 Door mounted 1 1 A Disconnect For a complete assembly, please select one of each:2 1 switch (pg..11) 1 handle (pg..11) OTFT OHBS2RJ Pole Bulk packs UL8 UL98 UL general purpose 0 0 IEC AC Bulk pack quantity OT1FT OTFT OTFT OTFT OTFT OT0FT OTFT OTFT $ Bulk pack OT1FT/B OTFT/B OTFT/B OTFT/B OTFT/B OT0FT/B OTFT/B OTFT/B Consult factory Selector handles for door mounted UL/NEMA Type IEC Type Color Defeatable Padlockable (lbs) Snapon Mounting for use on OT1FT OTFT 0.10 OHBS1PH $ 22 1 IP54 Black OHBSPH 24 1, R, 12 IP5 Black 0.17 OHBS2PJ 28 Screw mounting for use on OT1FT OTFT. For OT0, OT, and OT use OH 2_ only 0.11 OHBS1RH $ P54 Black 0.14 OHBSRH 24 1, R, 12 IP5 Black 0. OHBS2RJ 28 Pistol grip handle adapter 4 Description For use on (lbs) Adapter piece for pistol grip handle OT0 0. OHZX $ Includes hardware and shaft for pistol grip handles. Pistol handle must be ordered separately (see pg..) 1 Door mounted do not provide door interlock 2 Door mounted do not require shafts A snap on fourth pole may be added please reference accessories pg..8 4 The environmental rating of the pistol handle derates to NEMA 1 when used in conjunction with the OHZX adapter. Discount schedule: H1 [D1]: 1A Discount schedule: H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02

12 Standard nonfusible accessories Door mounted OA1G Auxiliary contacts 1 snapon mounting Description For use on: AC thermal AC rated (lbs) voltage 1 N.O. mounts on right hand 10 0 OA1G10 $ side of switch OT1 OT 1 N.C. mounts on left hand 10 0 OA1G01 side of switch Max. two contacts on each side of switch. Power poles Switch accepts one terminal pole per side: mounts on left or right side of switch. (OTPSFDN1 mounts to left side only.) Description Fourth pole Latebreak/earlymake AC thermal AC rated For use on: (lbs) voltage OT1, OT, OT OTPSFDN1 $ OT0OT OTPSFD 4 0 OT, OT OTPSFD 44 OT 0. OTPS1FD 54 OT1, OT, OT OTPLFD OT, OT 0 OTPLFD 44 OT 0. OTPL1FD 54 OTP_FD Terminal poles Switch accepts one terminal pole per side: mounts on left or right side of switch Description Solid neutral For use on: AC thermal AC rated (lbs) voltage OT1, OT, OT OTPNFD $ OT0OT OTPNFD 8 0 OT, OT OTPNFD OT 0. OTPN1FD OTP_FD OT1, OT, OT OTPDFD 28 Detachable neutral OT0OT 0 OTPDFD 8 OT, OT OTPDFD OT1, OT, OT OTPEFD OT0OT 0 OTPEFD 8 Ground terminal OT, OT OTPEFD OT 0. OTPE1FD OTST OTST OTS1T OTST1 OTST1 OTS1T1 Terminal shrouds snapon mounting for line or load side Description For use on: (lbs) pole OT1, OT, OT 0.02 OTST $ 8 includes one shroud OT, OT 0.02 OTST for line or load side OT0, OT, OT 0.02 OTS1T 4th pole OTP_FD 0.02 OTST1 4 includes one shroud OTP_FD 0.02 OTST1 for line or load side OTP_1FD 0.02 OTS1T UL File # E ABB are IP touchsafe as standard. Shrouds provide an extra degree of protection..12 Discount schedule H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02

13 Special configurations Shaft operated flange 0A A Disconnect Switch Handle Shaft 0A A Flange operated non fusible (Shaft) pole UL general purpose 0 OT0FF OTFF OTFF $ OTF Flange handles for use with OT0_, OT_, OT UL/ NEMA type Marking Defeatable Padlockable 1, R, 12 4, 4X OFF/ON OFF/ON DSFHNHS12 DSFHNHS4 $ 15 2 Shafts DSFHNHS12 For use with: Maximum enclosure depth (inches) OT0_ OT_ OT0_ OT_ 1 24 OTFS1 OTFS24 $ 0 Door hardware NEMA 12 Item Safety door latch, 2 point, door less than " high KDH2R $ 0 Safety door latch, 2 point, door greater than " high KDHR 2 DSFHS12 Flange operated fusible and nonfusible disconnect ABB s solution for complying with the new NFPA79 requirements is Flange Operated Fusible and Disconnect Switches. New 02 NFPA 79 changes requires main disconnecting means to be operable without the use of accessory tools or devices, independent of door position. This code also includes an interlocking provision to prevent the closing of disconnects while the enclosure door is open, unless an interlock is operated by a deliberate action. The flange operated disconnect are available as ridged shaft or flexible cable operated versions. The cable operated version allows you to install the disconnect switch anywhere in the enclosure depending on the length of the cable. Cables are available in lengths up to 84 inches. The designs are costeffective NFPA 79 solutions offering quick and easy installation. Discount schedule H1 [D1]]: NF1A A Discount schedule H2 [D2]: NF1A 0A Discount schedule H [DH]: Handles, shafts, accessories and lug kits Discount schedule SH [SH]: Door hardware kits 1SXU00002C02

14 Special configurations Cable operated flange 0A 0A Switch Handle Cable Lug kit (as required) Operating mechanism UL general purpose OT0F OTF OTF OT1E OT0U0 $ OTF Flange handles UL98; UL file #E For use with: OT0 F, OT1E, OT0U0 Environmental rating NEMA 1, R, 12 OHF1C12 $ 21 NEMA 4, 4X OHF1C4 24 Flexible cables OHF1C12 For use with: OT0 F, OT1E, OT0U Cable length (inches) OXC1L OXC1L48 OXC1L OXC1L72 OXC1L84 $ OXC1L OXC1L84 Operating mechanisms For use with: OT0 F MKCS1 $ 15 OT1E MKCS 12 OT0U0 MKCS4 171 Terminal lug kits For use Wire Wire Description Lugs per kit with size type #4 00 kcmil Cu/Al OZXA0 $ OT0U0 #4 00 kcmil Cu/Al OZXA0/ () #4 AWG Cu/Al Distribution lug OZXAS 0 Door hardware NEMA 12 Item Safety door latch, 2 point, door less than high KDH2R $ 0 Safety door latch, point, door greater than high KDHR 0 Discount schedule H2 [D2]: NF1A 0A Discount schedule H [DH]: Handles, shafts, accessories and lug kits Discount schedule H [D]: NF10A 1A Discount schedule SH [SH]: Door hardware kits

15 Special configurations Double throw 1A 0A Disconnect For a complete assembly, please select one of each: 1 switch (pg..15) 1 handle (pg..1) 1 shaft (pg..1) 1 terminal lug kit (pg..15) 1 bridging bar (pg..15) (Lug kits only necessary on 0A and above) OT0U04C OHY JE011 OXSX Lug kit (as required) Bridging bars OTFC UL only UL8 UL98 UL general purpose amp rating 0 0 IEC AC Pole 4 Pole 1 OT1FC OTFC OTFC OTFC OTFC OT0FC OTFC OTFC OT0U0C OT0U0C OT0U0C OT0U0C OT0U0C OT0U0C $ ,8 1,8,2,2 4,0 4,0 OT0U04C OT0UC OT0U04C OT0UC OT0U04C OT0UC $ 2, 2,,5,5 5,0 5,0 OHBS2AJE011 OHB JE011 Bridging busbar kits required for OT0_C through OT0_C 2 Description For Use On: Pole Kit 4 Pole kit OT0_C OT0_C OT0_C OT0_C OT0_C OT0_C OTZC1 OTZC2 OTZC OTZC14 OTZC24 OTZC4 $ Bridging bars are required on 00A double throw to operate as standard double throw. Otherwise, they will operate as two mechanically interlocked. OHY JE011 OXSX 1 A snap on power pole may be added to build a 4 pole 1A double throw switch. Reference pg For 1A double throw, jumpers are not provided. Discount schedule HT1 [D]: 1A Double throw Discount schedule HT1 [D]: 00A Double throw Discount schedule H7 [DR]: Handles, shafts, accessories & lug kits 1SXU00002C02

16 Special configurations Handles & shafts for double throw Shafts for use with selector handles.24 x.24" (xmm) Shaft length (in/mm) OT1F, OTF, OTF Recommended handles & shafts Switch Shaft diameter Recommended standard pistol Maximum recommended handle length shaft length OT1 x mm.24 x.24" 45 5 mm 290 mm OT0 x mm.24 x.24" 5 mm 290 mm OT0 0 12x12 mm.47 x.47" mm 595 mm Mounting depth (inches) OTF, OTF OT0F, OTF, OTF OH_1_ & OH OH_2_ OH_1_ & OH OH_2_ OH_2_. / OXSX85 $ / OXSX / OXSX / OXSX / OXSX1 9.8 / OXSX / OXSX0 Shafts for use with pistol handles.24 x.24" (xmm) Shaft length (in/mm) Maximum mounting depth (inches) OT1F OTF OTFOTF OT0FOTF OT1E OT0 5.2 / OXPX10 $ / OXPX / OXPX / OXPX / OXPX / OXPX40 28 Shafts for use with pistol handles.47 x.47" (12x12 mm) Shaft length (in/mm) Maximum Mounting Depth (inches) OT0 OT0 OETLNF0 OETLNF1 OETLNF10OETLNF / OXP12X2 $ 12.8 / OXP12X 15. / OXP12X / OXP12X / OXP12X55 52 Position selector handles for use with.24 x.24" (xmm) shafts 1 UL/NEMA Type IEC Type Markings Color Defeatable Padlockable 1, R, 12 IP5 I/0/II, ON/OFF/ON Black 0.1 OHBS2AJE011 $ Position pistol handles for use with.24 x.24" (xmm) shafts 1 UL/NEMA Type IEC Type Markings Color Defeatable Padlockable 1, R, 12 IP5 Black 0.29 OHB5JE011 $ 90 1, R, 12, 4, 4X IP I/0/II, ON/OFF/ON Black 0.29 OHB5LE , R, 12 IP5 Black 0. OHBJE , R, 12, 4, 4X IP Black 0. OHBLE Position pistol handles for use with.47 x.47" (12x12mm) shafts 1 UL/NEMA Type IEC Type Markings Color Defeatable Padlockable 1, R, 12 IP5 Black 0.9 OHB145J12E011 $ 10 1, R, 12, 4, 4X IP I/0/II, ON/OFF/ON Black 0.9 OHB145L12E , R, 12 IP5 Black 0.41 OHB175J12E , R, 12, 4, 4X IP Black 0.41 OHB175L12E Red/Yellow handles are available by substituting the OHB prefix with OHY. For other special handle configurations, consult factory..1 Discount schedule H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02

17 Special configurations Accessories for double throw Disconnect Additional poles Power poles Only one power pole per switch. Mounts on left or right side of switch (OTPSFPN1 mounts to left side only). OTP_FP Description Fourth Pole Latebreak/earlymake For use on OT1OT OT0OT OTOT OT OT1OT OT0 OTOT OT AC Thermal AC rated voltage 0 0 OTPSFPN1 OTPSFP OTPSFP OTPS1FP OTPLFP OTPLFP OTPLFP OTPL1FP $ Terminal poles Switch accepts one terminal pole per side. Mounts on left or right side of switch. OTP_FP Description Solid neutral Detachable Neutral Ground Terminal For use on OT1OT OTOT OT0OT OT1OT OT0OT OTOT OT OT1OT OT0OT OTOT OT AC Thermal AC rated voltage OTPNFP OTPNFP OTPN1FP OTPDFP OTPDFP OTPDFP OTPD1FP OTPEFP OTPEFP OTPEFP OTPE1FP $ OTP_1FP Terminal lug kits For Use On Wire Size Wire Type Lugs/Kit OT0_C OT0_C OT0_C #4 00kcmil #4 00kcmil () 14 AWG #2 0kcmil #2 0kcmil (2) #4 00kcmil () #14 AWG (2) #2 0kcmil (2) #2 0kcmil Cu/Al Cu/Al Cu/Al (Lbs) OZXA0 OZXA0/ OZXAT OZXA0 OZXA0/P OZXA2 OZXA OZXA0 OZXA0/ $ Auxiliary contacts snapon mounting Description For Use On AC Thermal AC rated voltage 1 N.O. OT1_C OA7G10 $ 1 N.C. OT10_C OAG01 1 N.O. OT00_C OA1G10 OT1 Mounting & installation considerations OA1G10 (1 N.O.) mounts on right side of switch only OA1G01 (1 N.C.) mounts on left side of switch only OA2G11 (1 N.O. & 1 N.C.) mounts on left or right side of switch Maximum two contacts on each side of switch Discount schedule H [DH]: Handles, shafts, accessories & lug kits 1SXU00002C02

18 OT0 10A OT0 10A 2 Pole Pole 4 Pole UL general purpose IEC AC OT0U02 $ OT10U02 0 OT0U0 OT0U12 OT0U0 OT10U0 OT10U12 OT10U0 $ 40 0 OT0U04 OT0U OT0U22 OT10U04 OT10U OT10U22 $ 50 TStyle handles for use with.47 x.47" (12x12mm) shafts UL/NEMA Type IEC Type Color Marking Length Defeatable Padlockable 1, R, 12 IP5 Black O/I & Off/On 2 x 0 OHB0J12P $ 1 Shafts for use with TStyle handles.47 x.47" (12x12mm) Shaft length Maximum mounting depth 11.0 / OXP12X2 $ 12.8 / OXP12X 15. / OXP12X / OXP12X / OXP12X55 52 Terminal lugs For use on Wire size Wire type Lugs per kit OT0 10 (4) # kcmil Cu OZXA10 $ 700 Auxiliary contacts Description For use on AC thermal AC rated voltage 1 NO OA1G10 $ 1 NC OT OAG01 Module for OEA28 contacts.