Steering Performance Evaluation of Off Highway Vehicle Using Matlab Tools
|
|
- Osborne Spencer
- 6 years ago
- Views:
Transcription
1 Steering Performance Evaluation of Off Highway Vehicle Using Matlab Tools Presenters: Narasimha Kota Vikas Kshirsagar
2 Overview of Presentation Introduction Different Steering Types Orbital Steering Mechanism Modeling in Simscape Performing Analysis Results & Discussion Summary
3 Steering Types Steering Types Manual Power RACK & PINION WORM & ROLLER HYDRAULIC ELECTRO-HYD RECIRCULATING BALL & NUT RACK & PINION RECIRCULATING BALL & NUT WORM & ROLLER HYDROSTATIC (GEROTOR) COLUMN DRIVEN EPS RACK & PINION PINION DRIVEN EPS RACK DRIVEN EPS
4 Orbital Steering System The Orbital SCU is a rotary servo valve connected to a gerotor. The steering is fully fluid linked, therefore there is no mechanical connection between the steering wheel and the steered wheels or articulation joint. Fig1: Orbital Steering
5 Analysis Objective To evaluate the steering performance of the vehicle at the conceptual design stage. Analysis scope: To virtually simulate the primary functions and observe the response of machine for performance parameters like: Steering Cycle times Metering Performance Multifunction Analysis Flow Priority to steering
6 Assumptions The analysis is performed assuming the vehicle is stationary. The friction factor for tire road interaction is assumed for this analysis. Inertia values between the spool and sleeve and other components are assumed for this analysis. Centering spring stiffness values are assumed for this analysis.
7 Orbital Steering Mechanism Orbital steering mechanism has complex components like Spool, Sleeve, centering springs & gerotor assembly. Steering Column The deflection angle between the spool and sleeve causes the orifices to open. Spool and sleeve are held at Neutral position by Centering Springs. Flow amplification is provided for faster steering requirement, which by passes the flow to the actuator. When steering input ceases, the centering springs bring spool to neutral position. Sleeve Spool GEROTOR Fig 2: Orbital Steering valve overview
8 Steering Model in Simscape Operator Input Steering control unit components like spool sleeve and gerotor are modeled. It is challenge to model interaction between the spool sleeve and gerotor to be modeled in simscape. Operator input is converted to spool/sleeve rotation. Mathematical model of steering control unit and the steering cylinders are developed in simscape. Analysis is performed by integrating Steering unit subsystem is integrated with full vehicle level model. Fig 3: Subsystem View of Simscape Model
9 Steering Model in Simscape Steering Mechanism of the articulated machine is modeled using Sim- Mechanics. The front and rear part of the vehicle is modeled as lumped mass. Inertia, Mass and CG Properties are assigned to it. Front and Rear end are connected together through hydraulic cylinders which exerts force to articulate the machine. Tire models have been developed and used in this model to load the steering linkage mechanism. Fig 4:Articulation of vehicle
10 Steering Unit Integrated to Vehicle Level Model Steering Control Unit Subsystem View Engine Pump Main Control Valve Linkages & Tire Model
11 Flow Pressure Cylinder Stroke Results & Summary Steering cycle times are evaluated for different Steering inputs and correlated with the physical test results. Time Steering performance of the machine is virtually evaluated for different engine speeds. Pressure and flow to the steering cylinders can be determined for various operator commands. The model once developed can be used for evaluating effect in change of various Time parameters. Time
12 Conclusions With such kind of advanced virtual simulation, lot of early design stage activities can be eliminated. The results obtained provides not only basis for evaluation of steering system performance but also for enhancement of design. Virtual simulation of the model reduces the cost and time associated with the design and physical testing significantly. Field Issues can resolved at early stage. Virtual verification reduces the risk for introduction of new products.
13 References 1.Fundamentals of Vehicle Dynamics by T.D Gillespie, First edition, Society of Automotive Engineers, Warrendale, Pa., Steering and Turning Vehicles 4,Steadystate turning and stability by Prof. R.G.Longoria, University of Texas, Austin, Spring, H. Merrit, Hydraulic Control system, JohnWiley & Sons, INC, 1967.
Presenters: Mr. Moresh Kolhe Mr. Babu Bhondave Mahindra & Mahindra (AFS) Copyright 2012 Mahindra & Mahindra Ltd. All rights reserved.
Presenters: Mr. Moresh Kolhe Mr. Babu Bhondave Mahindra & Mahindra (AFS) 1 Overview of Presentation Introduction. Objective. PST valve model using Simulink-Simscape. Results and Summary Summary 2 Introduction
More informationDevelopment of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems
TECHNICAL REPORT Development of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems S. NISHIMURA S. ABE The backlash adjustment mechanism for reduction gears adopted in electric
More informationVehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA)
Vehicle Dynamic Simulation Using A Non-Linear Finite Element Simulation Program (LS-DYNA) G. S. Choi and H. K. Min Kia Motors Technical Center 3-61 INTRODUCTION The reason manufacturers invest their time
More informationLMS Imagine.Lab AMESim Ground Loads and Flight Controls
LMS Imagine.Lab AMESim Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls helps designers from the aerospace industry to
More informationDevelopment and Deployment of Virtual Test Systems An enabler to faster and efficient vehicle development
Development and Deployment of Virtual Test Systems An enabler to faster and efficient vehicle development Muralidharan Chennakrishnan Vehicle Dynamics Attribute Engineering Ashok Leyland Product Development
More informationDynamic co-simulation of start stop starter motor solenoid using Matlab & Edyson
Dynamic co-simulation of start stop starter motor solenoid using Matlab & Edyson by Veerakumar G (RBEI/ENF8) Veerakumar.gopalan@in.bosch.com Associate Project Manager Robert Bosch Engineering and Business
More informationRacing Tires in Formula SAE Suspension Development
The University of Western Ontario Department of Mechanical and Materials Engineering MME419 Mechanical Engineering Project MME499 Mechanical Engineering Design (Industrial) Racing Tires in Formula SAE
More informationModelling Automotive Hydraulic Systems using the Modelica ActuationHydraulics Library
Modelling Automotive Hydraulic Systems using the Modelica ActuationHydraulics Library Peter Harman Ricardo UK Ltd. Leamington Spa, UK Peter.Harman@ricardo.com Abstract This paper describes applications
More informationModelling and simulation of full vehicle to study its dynamic behavior
Modelling and simulation of full vehicle to study its dynamic behavior 1 Prof. Sachin Jadhao, 2 Mr. Milind K Patil 1 Assistant Professor, 2 Student of ME (Design) Mechanical Engineering J.S.P.M s Rajarshi
More informationDynamic Behavior Analysis of Hydraulic Power Steering Systems
Dynamic Behavior Analysis of Hydraulic Power Steering Systems Y. TOKUMOTO * *Research & Development Center, Control Devices Development Department Research regarding dynamic modeling of hydraulic power
More informationModule Leader: Prof.Ashok Meti
AEL2501 Modern Automotive Systems Common for: AEL, AE and APD courses Module Leader: Prof.Ashok Meti 1 Module Aims and Summary The aim of this module is to prepare the students to critically evaluate the
More informationSimulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions. Andreas Schmidt, Audi AG, May 22, 2014
Simulation of Collective Load Data for Integrated Design and Testing of Vehicle Transmissions Andreas Schmidt, Audi AG, May 22, 2014 Content Introduction Usage of collective load data in the development
More informationAnalysis and control of vehicle steering wheel angular vibrations
Analysis and control of vehicle steering wheel angular vibrations T. LANDREAU - V. GILLET Auto Chassis International Chassis Engineering Department Summary : The steering wheel vibration is analyzed through
More informationChapter. Steering System Technology
Chapter 78 Steering System Technology Objectives After studying this chapter, you will be able to: Explain the operating principles of steering systems. Identify the major parts of a steering system. Compare
More informationPRS Series Planetary Roller Screws. A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew
PRS Series Planetary Roller Screws A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew Exlar Roller Screw Advantage Roller Screw Overview A roller screw is
More informationReview on Handling Characteristics of Road Vehicles
RESEARCH ARTICLE OPEN ACCESS Review on Handling Characteristics of Road Vehicles D. A. Panke 1*, N. H. Ambhore 2, R. N. Marathe 3 1 Post Graduate Student, Department of Mechanical Engineering, Vishwakarma
More informationDesign, Modeling And Simulation Of Retractable Aircraft Landing Gear Hydraulic Actuator
ISSN: 2278 0211 (Online) Design, Modeling And Simulation Of Retractable Aircraft Landing Gear Hydraulic Actuator YST Raju Scientist-F, Combat Vehicles Research and Development Establishment (CVRDE- DRDO),
More informationDesign of Suspension and Steering system for an All-Terrain Vehicle and their Interdependence
Design of Suspension and Steering system for an All-Terrain Vehicle and their Interdependence Saurabh Wanganekar 1, Chinmay Sapkale 2, Priyanka Chothe 3, Reshma Rohakale 4,Samadhan Bhosale 5 1 Student,Department
More informationModeling of 17-DOF Tractor Semi- Trailer Vehicle
ISSN 2395-1621 Modeling of 17-DOF Tractor Semi- Trailer Vehicle # S. B. Walhekar, #2 D. H. Burande 1 sumitwalhekar@gmail.com 2 dhburande.scoe@sinhgad.edu #12 Mechanical Engineering Department, S.P. Pune
More informationDEVELOPMENT OF ELECTRONICALLY CONTROLLED PROPORTIONING DIRECTIONAL SERVO VALVES PROJECT REFERENCE NO.: 38S1453
DEVELOPMENT OF ELECTRONICALLY CONTROLLED PROPORTIONING DIRECTIONAL SERVO VALVES COLLEGE BRANCH GUIDE PROJECT REFERENCE NO.: 38S1453 : BAPUJI INSTITUTE OF ENGINEERING AND TECHNOLOGY, DAVANGERE : MECHANICAL
More informationLMS Imagine.Lab AMESim Electromechanical
LMS Imagine.Lab AMESim Electromechanical LMS Imagine.Lab Electromechanical LMS Imagine.Lab Electromechanical helps engineers define straightforward strategies throughout the design process of electrical
More informationRobot Arm with Conveyor Belts
Robot Arm with Conveyor Belts This example models a robotic arm and two conveyor belts. One conveyor belts bring blocks to the robot. The robot grabs the block, flips it over and transfers it to another
More informationMODELS FOR THE DYNAMIC ANALYSIS OF THE SUSPENSION SYSTEM OF THE VEHICLES REAR AXLE
MODELS FOR THE DYNAMIC ANALYSIS OF THE SUSPENSION SYSTEM OF THE VEHICLES REAR AXLE Alexandru Cătălin Transilvania University of Braşov, Product Design and Robotics Department, calex@unitbv.ro Keywords:
More informationENERGY ANALYSIS OF A POWERTRAIN AND CHASSIS INTEGRATED SIMULATION ON A MILITARY DUTY CYCLE
U.S. ARMY TANK AUTOMOTIVE RESEARCH, DEVELOPMENT AND ENGINEERING CENTER ENERGY ANALYSIS OF A POWERTRAIN AND CHASSIS INTEGRATED SIMULATION ON A MILITARY DUTY CYCLE GT Suite User s Conference: 9 November
More informationModelling and Simulation Specialists
Modelling and Simulation Specialists Multi-Domain Simulation of Hybrid Vehicles Multiphysics Simulation for Autosport / Motorsport Applications Seminar UK Magnetics Society Claytex Services Limited Software,
More informationFunctional Design Principles Applied to Amphibious Aircraft
Functional Design Principles Applied to Amphibious Aircraft Patrick McNally, VI-grade Agenda About VI-grade and VI-Aircraft About Wipaire and Aircraft Float Design Template Methods Common Parts and Interchangeability
More informationPiezoelectric Direct Drive Servovalve
Piezoelectric Direct Drive Servovalve Jason E. Lindler, Eric H. Anderson CSA Engineering 2565 Leghorn Street, Mountain View, California Industrial and Commercial Applications of Smart Structures Technologies
More informationPreliminary Study on Quantitative Analysis of Steering System Using Hardware-in-the-Loop (HIL) Simulator
TECHNICAL PAPER Preliminary Study on Quantitative Analysis of Steering System Using Hardware-in-the-Loop (HIL) Simulator M. SEGAWA M. HIGASHI One of the objectives in developing simulation methods is to
More informationDesign, Modelling & Analysis of Double Wishbone Suspension System
Design, Modelling & Analysis of Double Wishbone Suspension System 1 Nikita Gawai, 2 Deepak Yadav, 3 Shweta Chavan, 4 Apoorva Lele, 5 Shreyash Dalvi Thakur College of Engineering & Technology, Kandivali
More informationA Study of the Two Wheeler Retarder Type Dynamometer System
A Study of the Two Wheeler Retarder Type Dynamometer System Nilesh R. Mate 1, Prof. D. Y. Dhande 2 P.G. Student, Department of Mechanical Engineering, A.I.S.S.M.S. College of Engineering, Pune, India 1
More informationDevelopment of Seamless Shift for Formula One Car
Development of Seamless Shift for Formula One Car Takashi YOSHIOKA* Katsumi KUBO* Takeshi UCHIYAMA* Ryo MATSUI* ABSTRACT Honda focused on gearbox development during its third Formula One era. The reduction
More informationModel Library Power Transmission
Model Library Power Transmission The Power Transmission libraries in SimulationX support the efficient modeling and analysis of mechanical powertrains as well as the simulation-based design of controlled
More informationSystem-level design of electrohydraulic and mechatronic systems
System-level design of electrohydraulic and mechatronic systems 2008 The MathWorks, Inc. Steve Miller Technical Marketing, Physical Modeling Tools The MathWorks GmbH, Munich, Germany Steve.Miller@mathworks.de
More informationSteering unit LAGC. Data sheet
Steering unit LAGC Data sheet Nominal sizes Series Maximum flow HE 14365 / 09.2017 40 1000 1 x and 2 x 80 l / min 2 LAGC HE 14365 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationA superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw. Planetary Roller Screws
A superior alternative to hydraulic or pneumatic motion providing 15 times the life of a ball screw Planetary Roller Screws Exlar Your Linear Motion Experts Exlar Corporation is committed to providing
More informationMECA0492 : Vehicle dynamics
MECA0492 : Vehicle dynamics Pierre Duysinx Research Center in Sustainable Automotive Technologies of University of Liege Academic Year 2017-2018 1 Bibliography T. Gillespie. «Fundamentals of vehicle Dynamics»,
More informationVariable Valve Drive From the Concept to Series Approval
Variable Valve Drive From the Concept to Series Approval New vehicles are subject to ever more stringent limits in consumption cycles and emissions. At the same time, requirements in terms of engine performance,
More informationResearches regarding a pressure pulse generator as a segment of model for a weighing in motion system
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Researches regarding a pressure pulse generator as a segment of model for a weighing in motion system To cite this article: I
More informationChapter 2 Dynamic Analysis of a Heavy Vehicle Using Lumped Parameter Model
Chapter 2 Dynamic Analysis of a Heavy Vehicle Using Lumped Parameter Model The interaction between a vehicle and the road is a very complicated dynamic process, which involves many fields such as vehicle
More informationMXSTEERINGDESIGNER MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES
MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES MXSTEERINGDESIGNER AUTOMATED STEERING MODEL PARAMETER IDENTIFICATION AND OPTIMIZATION 1 THE OBJECTIVE Valid steering models Measurement
More informationMathematical Modelling and Simulation Of Semi- Active Suspension System For An 8 8 Armoured Wheeled Vehicle With 11 DOF
Mathematical Modelling and Simulation Of Semi- Active Suspension System For An 8 8 Armoured Wheeled Vehicle With 11 DOF Sujithkumar M Sc C, V V Jagirdar Sc D and MW Trikande Sc G VRDE, Ahmednagar Maharashtra-414006,
More informationMathematical modeling of the electric drive train of the sports car
1 Portál pre odborné publikovanie ISSN 1338-0087 Mathematical modeling of the electric drive train of the sports car Madarás Juraj Elektrotechnika 17.09.2012 The present electric vehicles are using for
More informationStrategy for Transfer Elemental Designing and Employing Physical Characteristic Modeling of Steering Maneuvering (the Second Report)
TECHNICAL PAPER Strategy for Transfer Elemental Designing and Employing Physical Characteristic Modeling of Steering Maneuvering (the Second Report) S. KIMURA S. NAKANO Our previous report introduced a
More informationIntegrated Architectures Management, Behavior models, Controls and Software
Integrated Architectures Management, Behavior models, Controls and Software Realize innovation. Engineering challenges Bringing everything together Fuel efficiency Emissions Acceleration Performance Energy
More informationSTIFFNESS CHARACTERISTICS OF MAIN BEARINGS FOUNDATION OF MARINE ENGINE
Journal of KONES Powertrain and Transport, Vol. 23, No. 1 2016 STIFFNESS CHARACTERISTICS OF MAIN BEARINGS FOUNDATION OF MARINE ENGINE Lech Murawski Gdynia Maritime University, Faculty of Marine Engineering
More informationTransmissions. Pat Willoughby Wednesday Section 2/16/2005
Transmissions Pat Willoughby Wednesday Section /6/005 Strategies -> Concepts -> Modules Strategies (What are you going to do?) Basic movements on table, how you will score Analysis of times to move, physics
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationKINEMATIC DESIGN OF LIFT-TIPPING MECHANISM FOR SMALL SOLID WASTE COLLECTION TRUCK
Journal of Science and Technology, Vol. 31, No. 2 (2011), pp 135-141 135 2011 Kwame Nkrumah University of Science and Technology (KNUST) TECHNICAL NOTE KINEMATIC DESIGN OF LIFT-TIPPING MECHANISM FOR SMALL
More informationMODELING AND SIMULATION OF INTERNAL CIRCULATION TWO-PLATEN INJECTION MOLDING MACHINE BASED ON AMESIM
MODELING AND SIMULATION OF INTERNAL CIRCULATION TWO-PLATEN INJECTION MOLDING MACHINE BASED ON AMESIM Lu Yang, Jiong Peng, Dongjie Chen and Jian Wang* Beijing Institute of Technology, Beijing 100081, China
More informationDevelopment of Synchronizer Operation for integration in AMT Control Strategy
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X PP. 40-45 www.iosrjournals.org Development of Synchronizer Operation for integration in AMT Control Strategy
More informationDesign Methodology of Steering System for All-Terrain Vehicles
Design Methodology of Steering System for All-Terrain Vehicles Dr. V.K. Saini*, Prof. Sunil Kumar Amit Kumar Shakya #1, Harshit Mishra #2 *Head of Dep t of Mechanical Engineering, IMS Engineering College,
More informationModeling and Analysis of the Dynamic Performance of a High Speed Selective Compliant Assembly Robotic Arm (SCARA) on a Compliant Support
Modeling and Analysis of the Dynamic Performance of a High Speed Selective Compliant Assembly Robotic Arm (SCARA) on a Compliant Support Migara Liyanage Graduate Student mhl545@mun.ca Geoff Rideout Associate
More informationFuzzy based Adaptive Control of Antilock Braking System
Fuzzy based Adaptive Control of Antilock Braking System Ujwal. P Krishna. S M.Tech Mechatronics, Asst. Professor, Mechatronics VIT University, Vellore, India VIT university, Vellore, India Abstract-ABS
More informationUnit 1 Introduction to VEX and Robotics
Unit Overview Unit 1 Introduction to VEX and Robotics VEX lab kits bring robotics into the classroom, making it a fun and educational experience for all. In this introductory unit, you review the kit and
More informationClosed Loop Control of Separately Excited DC Motor
Closed Loop Control of Separately Excited DC Motor Vikramarajan Jambulingam Electrical and Electronics Engineering, VIT University, India. Abstract: In this project the mathematical model for closed loop
More informationSteering Module Test Simulator SMTS
Steering Module Test Simulator Overview The Steering Module Test Simulator () from MB Dynamics is a non-hydraulic turnkey lab test system, offering accurate, reliable and repeatable in-laboratory simulations
More informationQUARTER CAR SUSPENSION SYSTEM WITH ONE DEGREE OF FREEDOM SIMULATED USING SIMULINK. L. Bereteu, A. Perescu
Analele Universităţii de Vest din Timişoara Vol. LVI, 202 Seria Fizică QUARTER CAR SUSPENSION SYSTEM WITH ONE DEGREE OF FREEDOM SIMULATED USING SIMULINK L. Bereteu, A. Perescu Mechanical and Vibration
More informationMORSE: MOdel-based Real-time Systems Engineering. Reducing physical testing in the calibration of diagnostic and driveabilty features
MORSE: MOdel-based Real-time Systems Engineering Reducing physical testing in the calibration of diagnostic and driveabilty features Mike Dempsey Claytex Future Powertrain Conference 2017 MORSE project
More informationSteering unit LAGZ. Data sheet. Series 2 x
Steering unit LAGZ Data sheet Nominal sizes 125 620 Series 2 x Maximum flow 50 l / min HE 11868 / 09.2017 2 LAGZ HE 11868 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details Function,
More informationLow-torque Deep-groove Ball Bearings for Transmissions
New Product Low-torque Deep-groove Ball Bearings for Transmissions Katsuaki SASAKI To achieve low fuel consumption in response to environmental concerns, we have focused on reducing the friction of tapered
More informationSteering Fundamentals
CHAPTER 65 Fundamentals OBJECTIVES Upon completion of this chapter, you should be able to: List the parts of steering systems. Describe the principles of operation of steering systems. Compare linkage
More informationISSN: SIMULATION AND ANALYSIS OF PASSIVE SUSPENSION SYSTEM FOR DIFFERENT ROAD PROFILES WITH VARIABLE DAMPING AND STIFFNESS PARAMETERS S.
Journal of Chemical and Pharmaceutical Sciences www.jchps.com ISSN: 974-2115 SIMULATION AND ANALYSIS OF PASSIVE SUSPENSION SYSTEM FOR DIFFERENT ROAD PROFILES WITH VARIABLE DAMPING AND STIFFNESS PARAMETERS
More informationBuilding Fast and Accurate Powertrain Models for System and Control Development
Building Fast and Accurate Powertrain Models for System and Control Development Prasanna Deshpande 2015 The MathWorks, Inc. 1 Challenges for the Powertrain Engineering Teams How to design and test vehicle
More informationFive Cool Things You Can Do With Powertrain Blockset The MathWorks, Inc. 1
Five Cool Things You Can Do With Powertrain Blockset Mike Sasena, PhD Automotive Product Manager 2017 The MathWorks, Inc. 1 FTP75 Simulation 2 Powertrain Blockset Value Proposition Perform fuel economy
More informationDEVELOPMENT OF HYDRAULIC BRAKE DESIGN SYSTEM APPLICATION
DEVELOPMENT OF HYDRAULIC BRAKE DESIGN SYSTEM APPLICATION AMOGH DESHPANDE Department of Mechanical Engineering, VJTI, Matunga, Mumbai, India ABSTRACT The brakes which are actuated by the hydraulic pressure
More informationGear Shift Quality Improvement In Manual Transmissions Using Dynamic Modelling
Seoul 2000 FISITA World Automotive Congress June 12-15, 2000, Seoul, Korea F2000A126 Gear Shift Quality Improvement In Manual Transmissions Using Dynamic Modelling David Kelly Christopher Kent Ricardo
More informationEE 370L Controls Laboratory. Laboratory Exercise #E1 Motor Control
1. Learning Objectives EE 370L Controls Laboratory Laboratory Exercise #E1 Motor Control Department of Electrical and Computer Engineering University of Nevada, at Las Vegas To demonstrate the concept
More informationMARITIME AFTERNOON. Torben Ole Andersen. June 14, 2017 Aalborg University, Denmark
MARITIME AFTERNOON HYDRAULICS Torben Ole Andersen June 14, 2017 Aalborg University, Denmark Agenda Marine Propellers Digital Hydraulics in a Hydraulic Winch Secondary Control in of Multi -Chamber Cylinders
More informationAdvanced Vehicle Performance by Replacing Conventional Vehicle Wheel with a Carbon Fiber Reinforcement Composite Wheel
Advanced Vehicle Performance by Replacing Conventional Vehicle Wheel with a Carbon Fiber Reinforcement Composite Wheel Jyothi Prasad Gooda Technical Manager Spectrus Informatics Pvt..Ltd. No. 646, Ideal
More informationBond Graph Modeling and Simulation Analysis of the Electro-Hydraulic Actuator in Non-Load Condition
4th International Conference on Sensors, Mechatronics and Automation (ICSMA 2016) Bond Graph Modeling and Simulation Analysis of the Electro-Hydraulic Actuator in Non-Load Condition Liming Yu1, a, Hongfei
More informationDynamic simulation of the motor vehicles using commercial software
Dynamic simulation of the motor vehicles using commercial software Cătălin ALEXANDRU University Transilvania of Braşov, Braşov, 500036, Romania Abstract The increasingly growing demand for more comfortable
More informationActuator Force Using Physical Modeling Tools to Design Power Optimized Aircraft
Actuator Force Using Physical Modeling Tools to Design Power Optimized Aircraft 2009 The MathWorks, Inc. Key Points 1. Testing different actuator designs in one environment saves time and encourages innovation
More informationModeling and Simulate Automotive Powertrain Systems
Modeling and Simulate Automotive Powertrain Systems Maurizio Dalbard 2015 The MathWorks, Inc. 1 Model-Based Design Challenges It s hard to do good Model-Based Design without good models Insufficient expertise
More informationVibration Fatigue Analysis of Sheet Metal Fender Mounting Bracket & It's Subsequent Replacement With Plastic
Vibration Fatigue Analysis of Sheet Metal Fender Mounting Bracket & It's Subsequent Replacement With Plastic Vikas Palve Manager - CAE Mahindra Two Wheelers Ltd D1 Block, Plot No 18/2 (Part), Chinchwad,
More informationINTEGRATED HYDRO-MECHANICAL SIMULATION OF A CAM-ROCKER ARM-UNIT INJECTOR SYSTEM TO ADDRESS NOISE AND VIBRATION ISSUES
GT-Suite Users Conference Frankfurt, Germany, October 10 th 2005 INTEGRATED HYDRO-MECHANICAL SIMULATION OF A CAM-ROCKER ARM-UNIT INJECTOR SYSTEM TO ADDRESS NOISE AND VIBRATION ISSUES R. HAM, H. FESSLER
More informationMulti-Body Simulation of Powertrain Acoustics in the Full Vehicle Development
Page 1 Multi-Body Simulation of Powertrain Acoustics in the Full Vehicle Development SIMPACK User Meeting 2011 Alexander Schmid, IABG mbh Andreas Raith, BMW Group Salzburg, Page 2 Powertrain Acoustics
More informationSTUDY OF AN ARTICULATED BOOM LIFT BY CO- SIMULATION OF BODIES FLEXIBILITY, VEHICLE DYNAMICS AND HYDRAULIC ACTUATION
Georgia Institute of Technology Marquette University Milwaukee School of Engineering North Carolina A&T State University Purdue University University of California, Merced University of Illinois, Urbana-Champaign
More informationCollaborative vehicle steering and braking control system research Jiuchao Li, Yu Cui, Guohua Zang
4th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering (ICMMCCE 2015) Collaborative vehicle steering and braking control system research Jiuchao Li, Yu Cui, Guohua
More informationFull Vehicle Simulation for Electrification and Automated Driving Applications
Full Vehicle Simulation for Electrification and Automated Driving Applications Vijayalayan R & Prasanna Deshpande Control Design Application Engineering 2015 The MathWorks, Inc. 1 Key Trends in Automotive
More informationInfluence of Parameter Variations on System Identification of Full Car Model
Influence of Parameter Variations on System Identification of Full Car Model Fengchun Sun, an Cui Abstract The car model is used extensively in the system identification of a vehicle suspension system
More informationPRODUCT OVERVIEW HIGHEST PRECISION
PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products
More informationApplication of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines
Application of the SuperGen Electro-Mechanical Supercharger to Miller-Cycle Gasoline Turbocharged Engines A. H. Guzel, J. Martin North American GT Conference 2017 11/14/2017 1 Overview Program Goal & Technology
More informationDesign and Modeling of Fluid Power Systems ME 597/ABE 591
Systems ME 597/ABE 591 Dr. Monika Ivantysynova MAHA Professor Flud Power Systems MAHA Fluid Power Research Center Purdue University Systems Dr. Monika Ivantysynova, Maha Professor Fluid Power Systems Mivantys@purdue.edu
More informationTRANSMISSION COMPUTATIONAL MODEL IN SIMULINK
TRANSMISSION COMPUTATIONAL MODEL IN SIMULINK Pavel Kučera 1, Václav Píštěk 2 Summary: The article describes the creation of a transmission and a clutch computational model. These parts of the powertrain
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationResonance Optimization in Linear Compressor
Resonance Optimization in Linear Compressor Madhura Sevekari; Prof.Suneeta Phadkule; Dr. Virendra Bhojwani Lecturer, Prof, Dept of Mechanical engg, Prof, Dept of mechanical engg, Dept of mechanical engg,
More informationParametrization of Steering Models and. Analysis of Driving Maneuvers with. MXsteeringdesigner and MXevaluation
Parametrization of Steering Models and Analysis of Driving Maneuvers with MXsteeringdesigner and MXevaluation by Matthias Becker and Matthias Niegl 20.09.2016 1 MXsteeringdesigner MXsteeringdesigner 20.09.2016
More informationMECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
More informationVibration Test Systems. ibratio
ibratio Lansmont Vibration Test Systems are versatile, easy to operate, and reliable servo-hydraulic vibration testing equipment. Whether you are testing bare products, individual packages, full pallet
More information1036. Thermal-hydraulic modelling and analysis of hydraulic damper for impact cylinder with large flow
1036 Thermal-hydraulic modelling and analysis of hydraulic damper for impact cylinder with large flow Y Guo, C P Liu, B W Luo Y Guo 1, C P Liu 2, B W Luo 3 1 Engineering Research Centre of Advanced Mining
More informationElectromechanical Steering with Parallel-axis Drive
Service Training Self-study Programme 399 Electromechanical Steering with Parallel-axis Drive Design and Function The electromechanical power steering has many advantages compared with a hydraulic steering
More informationDESIGN OF A MODULAR STEERING SYSTEM TEST BENCH FOR DURABILITY, PERFORMANCE AND CHARACTERIZATION TESTS
DESIGN OF A MODULAR STEERING SYSTEM TEST BENCH FOR DURABILITY, PERFORMANCE AND CHARACTERIZATION TESTS Elif KILINÇ, Dr. Orhan ATABAY, Şeref Server ERSOLMAZ, Hatice ERDOĞAN, Automotive Technologies Research
More informationUnit No.03 Front axle, Steering system, Rear axle, Wheel & Tyres
Unit No.03 Front axle, Steering system, Rear axle, Wheel & Tyres Prepared by, Prof. Santosh Kailas Chandole ME (Design Engineering) BE (Automobile Engineering) Steering system STEERING REQUIREMNTS: It
More informationNovel Chassis Concept for Omnidirectional Driving Maneuvers
Novel Chassis Concept for Omnidirectional Driving Maneuvers Challenges in modelling suspensions with wheel individual steering system KIT The Research University in the Helmholtz Association www.kit.edu
More informationImprovement of Vehicle Dynamics by Right-and-Left Torque Vectoring System in Various Drivetrains x
Improvement of Vehicle Dynamics by Right-and-Left Torque Vectoring System in Various Drivetrains x Kaoru SAWASE* Yuichi USHIRODA* Abstract This paper describes the verification by calculation of vehicle
More informationUsing ABAQUS in tire development process
Using ABAQUS in tire development process Jani K. Ojala Nokian Tyres plc., R&D/Tire Construction Abstract: Development of a new product is relatively challenging task, especially in tire business area.
More informationOPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018
OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018 M.Sc. Oleg Krecker, PhD candidate, BMW B.Eng. Christoph Hiltner, Master s student, Affiliation BMW AGENDA
More informationRIDE COMFORT SIMULATION OF A VEHICLE EQUIPPED WITH SEMI- ACTIVE STEERING SYSTEM
International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 11, pp. 2495-2503, January-June 2015 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.11.2015.29.0210
More informationModelling of Diesel Vehicle Emissions under transient conditions
Modelling of Diesel Vehicle Emissions under transient conditions Dr. Gavin Dober Combustion and Hydraulics Manager, Davide Del Pozzo Delphi Trainee 216-217 Advanced Injection & Combustion Center Delphi
More information#11. Abstract. Introduction
#11 Dr. Ing T. Hong, P.E. President BarDyne, Inc. Stillwater, Oklahoma U.S.A. Dr. Richard K. Tessmann, P.E. Vice President FES, Inc. Stillwater, Oklahoma U.S.A. Computerized Design Analysis of Machine
More information