> Ceramic pulley linings for belt conveyor systems
|
|
- Tobias Patrick
- 6 years ago
- Views:
Transcription
1 > Ceramic pulley linings for belt conveyor systems
2 Benefit from the consistent use of sophisticated technology and maximise the efficiency of your entire facility! Maximum facility availability, productivity and operating safety guarantee maximum economic efficiency and smooth processes in the entire extraction cycle. Pulley linings of industry ceramic Areas of application General mining Opencast lignite mining Potash mining Salt mining Iron ore mining Gravel and sand pits Cement industry Reliability in the face of enormous loads and for maximum demands The industrial ceramic pulley lining STS 4000 is distinguished by: > high facility availability thanks to minimum down times > high traction, even under loamy-wet conditions > maximum belt utilisation > increased belt life thanks to lower belt tension > significant service life extension of pulley lining and pulley thanks to use of our RenoLin procedure > avoidance of belt slippage and belt over-heating > reduced maintenance and operating costs Conclusion: > avoidance of unforeseeable and cost-intensive down times > securing uninterrupted and highly efficient extraction operation > cost minimisation thanks to lower investment and reconditioning measures > extension of service life by up to threefold compared to rubber linings STS 4000 the ideal solution for belt conveyor systems! Specific application characteristics: > very high friction coefficient > enormous wear resistance > high dimensional stability > outstanding antifriction properties > wide deployment temperature range > thermal, mechanical and chemical resistance > weather-proof > lining repair/-renewal also possible on site thanks to our RenoLin procedure STS 4000 as direct or indirect connection with and without lining base STS Friction offers... The rest of our product range > FRICTION MATERIALS Brake linings Clutch facings Drive linings Holding linings Evolution of the conveying pulleys various diamond patterns > SLIDING, SEALING AND INSULATING MATERIALS depending on specifications. All-wood wood/steel system rubber linings, with and without cermic insets fully ceramic pulley linings STS 4000 for ideal power transmission and maximum operating safety > Evolution - latest development Industrial ceramic STS 4000
3 Pulley linings as good as new thanks to partial or complete reconditioning. Benefit from the unrivalled economy of RenoLin technology! The efficient system consisting of the high performance system STS 4000 and the forward-looking RenoLin pulley relining or reconditioning represents an innovation in economy and productivity. Common diamond patterns Direct repair and reconditioning procedure RenoLin - the innovative high performance procedure from the inventor STS Friction. Only the perfect interplay between the high performance material STS 4000 and the innovative reconditioning procedure RenoLin combined with the decades of on site experience of our technicians in major gravel pits, potash mines and in opencast lignite mining guarantee a 100% result. We would be happy to offer you this viable complete system too! By means of a thermal/mechanical stripping process we achieve a gentle coating removal of the pulley lining STS 4000 produced by us as a direct connection. During the complete removal of the lining no damage or deformation of the pulley surface occurs. The significant advantages in handling are: > complete lining renewal > partial lining repair possible too > 100% material connection at the transition of the repair point > can be performed in the factory or on site at your facility Conclusion: > extension of service life of pulley, lining, belt and as a result of the entire facility > minimum down times, maximum durability > completely reconditioned pulley linings, good as new > low repair costs thanks to partial repair > lining repair depending on access possibility on site too Diamond pattern type H Diamond pattern type D Example of a partial repair on site Diamond pattern type W > gentle thermal/mechanical partial coating removal > STS Friction bonding agent > application, compression and structuring of ceramic mass Without diamond pattern > Innovative repair procedure RenoLin for minimum use of resources
4 Ideal overall solution: and guarantee minimum standstill times, maximum effectiveness and consequently maximum economic efficiency Influence of the pulley lining friction coefficient Preloading Take-up pulley Results Drive pulley Notes: Data basis for the calculation example Conveying length = 740 m Conveying capacity = 720 t/h Conveying height = 120 m Conveying speed = 3,80 m/s Friction coefficients between rubber belt and drive pulleys d L d H T1 to T4 Preloading = conveying length = conveying height = belt tensile forces = required belt preloading force Advantages of STS 4000 in reducing operating and maintenance costs: > service life extension up to three-fold compared to rubber linings > avoidance of belt slippage and belt overheating > extension of belt service life through lining repair or -renovation with RenoLin Advantages of high friction coefficients of STS 4000: Sparing of the conveying belts and as a result extension of belt durability by: > reduction of preloading force by up to 87% > reduction of required belt connection strength by up to 51% > reduction of belt tensile forces by up to 87% > increase in bearings durability through load reduction by up to 87% Types of attachment and design of lining bases/iron pans > Screw connection cylindrical belt pulley > Welding connection Lining base Belt pulley Special truss-head screw crowned belt pulley Edge reinforcement Inner bandage Material key data > Material Pulley lining based on industrial ceramics > Colour Anthracite-grey > Technical data Average friction coefficients - dry: 0,80 µ - wet: 0,60 µ - loamy wet: 0,40 µ Temperature resistance: - 40 C to 120 C Pressure resistance: at RT 30 N/mm² Shear strength lining / pulley at RT 4,5 N/mm² at 120 C 3,0 N/mm² Edge reinforcement Specific weight: 2,0 g/cm³ cylindrical belt pulley Lining base Belt pulley > Design of lining bases / iron pans crowned belt pulley Inner bandage Resistance: Oil, salt, weather > Design 1. Direct connection with pulley 2. Indirect connection with lining base for screwing or welding with the pulley 3. Cylindrical or crowned form in the standard thicknesses 10 mm, 12 mm, 15 mm and special thicknesses from 8 mm at customer request Divison of iron pans Thickness of iron pans Pulley diameter up to Ø315 mm = 2 parts up to 1150 mm = 4 mm Ø315 - Ø630 mm = 2-3 parts mm = 5 mm Ø630 - Ø1000 mm = 3-4 parts mm = 5-6 mm Ø Ø1400 mm = 4-5 parts over 1600 mm = 6 mm over Ø1400 mm = 5-parts + more If so desired other divisions and thicknesses can be made if technically feasible. Edge reinforcements For screwed iron pans For welded iron pans up to 1150 mm = 40 x 4 mm up to 1150 mm = 20 x 4 mm over 1150 mm = 50 x 4 mm over 1150 mm = 50 x 4 mm > Areas of use In rubber belt conveying systems for all kinds of drive, loading and tail pulleys, even under wet and loamy-wet operating conditions. The above-mentioned material key data was determined by STS Friction s test methods. Depending on the specific application, experience shows that the maximum values stated cannot always be achieved simultaneously. Given the multitude of applications, possible uses and technical circumstances, we recommend in specific instances that the material be tested for its suitability in practice. Our consulting engineers and technicians are available for technical questions on your conditions of use. > Innovative technology for convincing drive mechanisms
5 STS Friction GmbH Reibbelagtechnik Am Schürmannshütt 26 a D Moers Germany Phone: +49 (0) / Fax: +49 (0) / info@sts-friction.de Look forward to a sunny future outlook with a well-functioning whole composed of brilliant functionality and economy! Realise visions together! Fotografie, Grafik, Text, all rights reserved by MoS-WERBUNG.BRD#TM, VII 08, MOESCHTER GROUP, DOTHERM, DOCERAM, STS Friction. Eingetragene Warenzeichen: STS 4000, RenoLin Certified Company DIN EN ISO 9001:2000 MOESCHTER GROUP Member of VRI Verband der Reibbelagindustrie e.v.
REMAWELL. REMA TIP TOP Sidewall Conveyor Belts
REMA TIP TOP Sidewall Conveyor Belts REMAWELL Industrie Chemische Beständigkeitsliste Chemical resistance chart Tableau de résistance chimique Tabla de resistencia quimica Industrie Service and maintenance
More informationCONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines
CONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines CONTI ALLCRETE WIRE is the perfect hose for the use in concrete and soild pumps. With its extruded smooth bore tube, made of highly
More informationCONVEYING BELTS FOR AUTOMOTIVE THE SUSTAINABLE COMPONENT FOR THE TRANSPORT IN THE VEHICLE ASSEMBLY
CONVEYING BELTS FOR AUTOMOTIVE THE SUSTAINABLE COMPONENT FOR THE TRANSPORT IN THE VEHICLE ASSEMBLY WE THE TEAM OF STRICKER STAND FOR: professional consultation CONFIDENT CONVEYING ECONOMICAL CONSUMPTION
More informationFRICTIONAL CONNECTIONS CATALOGUE
FRICTIONAL CONNECTIONS CATALOGUE Reprinting and all other forms of copying, not even partially, is prohibited without permission from Stüwe. Maschinenfabrik GmbH & Co. KG Production: Studio Salewski GmbH,
More informationSchüco Premium Collectors Outstanding quality, performance and design
Schüco Premium Collectors Outstanding quality, performance and design 2 Schüco Premium collectors Schüco Premium line collectors - The next generation Since its entry into the solar thermal sector, Schüco
More informationSIT Power Transmission, a history of passion and technology
SIT Power Transmission, a history of passion and technology SIT S.p.A., a core member of the Scaglia Group which was founded nearly 200 years ago in Bergamo Italy, has a 50 years history dedicated to manufacturing
More informationLow wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
More informationConveyor Solutions. Trellex FLEXOPIPE
EN Trellex FLEXOPIPE 2 Trellex FLEXOPIPE flexible, unique, ecological! Conveyor belt systems of enclosed material transport are an excellent solution to various conveying problems. Metso is Europe s leading
More informationIntroduction. Applications
Introduction Bulk India 2003 The strongest conveyor belts from 1970 to 2003 by Bernd Küsel PHOENIX Conveyor Belt Systems Hamburg, Germany The demand for higher strength conveyor belts has been increasing
More informationToyoda Machinery Europe. horizontal machining centres
Toyoda Machinery Europe horizontal machining centres horizontal machining centres FH-J Series: FH400J FH500J FH-S Series: FH450S FH550S FH6S FH-SX Series: FH550SX FH6SX FH800SX FA-S Series: FA6S FA800S
More informationFABRIC-RUBBER CONVEYOR BELTS, GENERAL PURPOSE
FABRICRUBBER CONVEYOR BELTS, GENERAL PURPOSE APPLICATION Rubber fabric conveyor belts for general purpose are used for transport of loose materials where particular requirements towards working conditions
More informationCONVEYOR ACCESSORIES BELT CLEANERS
CONVEYOR ACCESSORIES BELT CLEANERS CONVEYOR ACCESSORIES KEEP YOUR CONVEYOR RUNNING WITH GURTEC COMPONENTS The full range of GURTEC conveyor components rollers, pulleys, idlers and garlands and conveyor
More informationFrictional Connections Catalogue
MMADE IN GERMANY Frictional Connections Catalogue ADE IN GERMANY Certified in accordance with DIN ISO 9001:2008 FRICTIONAL CONNECTIONS TECHNOLOGY THAT CONNECTS Dear business partner, STÜWE GmbH & Co. KG
More informationQuarryMaster. Helical-Bevel Geared Motors
QuarryMaster Helical-Bevel Geared Motors It runs and runs and runs and runs... Are you unearthing large quantities on an ongoing basis? Do you sometimes move huge masses? Standstill is not part of your
More informationLocking Assemblies for use with bending loads
EN 03 2011 Locking Assemblies for use with bending loads Partner for performance www.ringfeder.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld, Germany
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationHTD - Timing Belt Drives. Mustang Speed Mustang Torque
HTD - Timing Belt Drives Mustang Speed Mustang Torque SIT Timing Belt Drives SIT Timing belts are modern drive elements made of high-quality materials and produced according to the latest manufacturing
More informationMATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationInnovative Technologies for Ground Support Equipment. Conveyor Belt Vehicle. Orbiter D 7.5 D / 9 D / 12 D
Innovative Technologies for Ground Support Equipment Conveyor Belt Vehicle Orbiter D 7.5 D / 9 D / 12 D MULAG Conveyor Belt Vehicles Orbiter D Individually adaptable to customers needs Easy and fast Handling
More informationiglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
More informationOLKO Maschinentechnik GmbH.
Mining the future. 2 OLKO Maschinentechnik GmbH. Pioneering your world. Since our company was founded in 1989, OLKO Maschinentechnik GmbH has been a driving force in shaft construction and hoisting technology.
More informationSplitter Boxes from Liebherr. Strong and quiet-running
Splitter Boxes from Liebherr Strong and quiet-running Long operating life Liebherr multi-output pump transmissions are designed and built for tough operating conditions in construction machinery, and are
More informationBucket Elevator Belt Bucket Conveyor
Bucket Elevator TD belt bucket conveyor is suitable for density less than.5t/m3 lump, granular material such as coal, cement, fertilizer, sand, grain, etc.belt bucket conveyor has two types of bucket:
More information5-Layer Hot & Cold Water Piping
TECHNICAL INFORMATION 5-Layer Hot & Cold Water Piping POLO-ECOSAN ML 5 POLO-ECOSAN ML 5. The development of PP-R multilayer technology A new innovation has now been added to the successful polypropylene
More informationTECHNICAL INFORMATION
5-Layer Hot & Cold Water Piping TECHNICAL INFORMATION POLO-ECOSAN ML 5 POLO-ECOSAN ML 5 THE DEVELOPMENT OF PP-R MULTILAYER TECHNOLOGY A new innovation has now been added to the successful polypropylene
More informationSSV TM100 - SSV TM215 DRUM MOTORS 4.0" to 8.5" diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS
Engineered to Keep Your Business Running SSV TM100 - SSV TM215 DRUM MOTORS 4.0" to 8.5" diameter 0.11 to 7.5 hp SANITARY DRUM MOTORS BELT PULL (BP) = (F0 + F1 + F2) Roller Bed Conveyor Slider Bed Conveyor
More informationF Series. High-speed folding doors
F Series High-speed folding doors 02 F Series With construction methods responding to increasing architectural demands and constantly developing technology expectations are changing. In response to just
More informationNEW: quality. DuoSolar. DuoSolar. ARMAFLEX DUOSOLAR the easy-to-install pre-insulated tubing system for reducing the energy loss.
NEW: microcell quality DuoSolar DuoSolar JOINING CLEAN ENERGY TOGETHER ARMAFLEX DUOSOLAR the easy-to-install pre-insulated tubing system for reducing the energy loss. The pre-insulated joinsplit pipes
More informationVALSIR SUPPLY SYSTEMS MIXAL
TECHNICAL DATA SHEET VALSIR SUPPLY SYSTEMS MIXAL The product Mixal is an extremely flexible multilayer pipe and is therefore ideal for the creation of floor, wall and ceiling radiant heating and cooling
More information3. BEARING ARRANGEMENT DESIGN
3. BEARING ARRANGEMENT DESIGN 3.1 GENERAL PRINCIPLES OF ROLLING BEARING ARRANGEMENT DESIGN Rotating shaft or another component arranged in rolling bearings is guided by them in radial as well as in axial
More informationPSI RUBBER STEEL FLANGE GASKETS
PSI RUBBER STEEL FLANGE GASKETS HIGH OPERATIONAL SAFETY AND MAINTANANCE FREE HIGH RESILIENCE COMPENSATES PRESSURE CHANGES AND VARIATIONS IN TEMPERATURE LEAKPROOF FOR MANY FLANGE SURFACES WWW.PSI-PRODUCTS.COM
More informationDr. TRETTER AG. Tolerance Rings. safe cost-effective fast assembly
Dr. TRETTER AG Tolerance Rings safe cost-effective fast assembly Tolerance Rings are corrugated metal strips manufactured of high quality spring steel. Tolerance Rings are a fastening device between two
More informationREMAN RANGE: BREATHE NEW LIFE INTO YOUR VEHICLE.
REMAN RANGE: BREATHE NEW LIFE INTO YOUR VEHICLE. THE economical, GREEN, GUARANTEED ALTERNATIVE. 2-year warranty on reman engines! PRESENTATION Choosing the Reman range means having complete confidence
More information> energy independent > automatic mode > plug & play, immediately ready for operation > standard and individual solutions
Self-suction Vacuum Lifters Self-suction Vacuum Lifters for horizontal transport of smooth, non porous loads U01-E U02-E U02-6 U075-E U125-4L U250-4Q VACU-LIFT offers you a wide variety of standard systems
More informationCustomised drive solutions
Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous
More informationElastomeric Bearings & Industrial Products. Elastomeric Bearings & Industrial Products. EA Bearings. EA Bearings. EA Series Standard Bearings
EA Bearings EA Bearings EA Series Standard Bearings Support and Installation Part Number These bearings are designed to support a vertical load up to 2000kN with the constant bearing temperature not exceeding
More informationProduct information. cuturon. neobond pretex
Product information cuturon neobond pretex pretex impregnated special papers neobond robust synthetic fibre papers cuturon versatile nonwovens PRODUCT SPECIFICATION High-quality, impregnated special paper:
More informationRydell. Product Range. Polyurethane timing belts. Rydell Industrial (Belting) Co.
Polyurethane timing belts Product Range Rydell offers the most comprehensive range of polyurethane timing belts available to satisfy all industry requirements. www.rydell.com.au Endless Belts R Gates Synchro-Power
More informationAG1-BC BUTTERFLY VALVE
AG1-BC BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 9.4 09/2016 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
More informationERHARD is a company of. Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave
ERHARD is a company of Dynamically into a new dimension the new Butterfly valve ERHARD ROCO wave A new chapter of the success story Johannes Erhard, who founded our company more than 140 years ago, would
More informationTelescopic slides. Customized solutions.
Telescopic slides. Customized solutions. Engineering for telescopic slides. For more than 40 years, Schock has been developing and manufacturing telescopic ball bearing slides in the field of linear motion
More informationWÜRTH Industrie Service DE EN W TEC SECURING. Wedge lock washers Ring lock washers. Wedge lock nuts Wheel nuts
WÜRTH Industrie Service DE EN W TEC SECURING Wedge lock washers Ring lock washers Wedge lock nuts Wheel nuts Table of contents Page Preface 1 Product information Wedge lock washers 2 Ring lock washers
More informationGerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
More informationBulk Material. Handling
Bulk Material Handling 1 The Original Belt-in-a-Tube The BeltVeyor is a durable workhorse for any farm grain handling or bulk materials operation. Portable Tubular Belt Conveyor Fragile materials are handled
More informationJonas 900 / 980 For the efficient cleaning of medium-sized industrial premises
Cleaning Technology Municipal Technology Jonas 900 / 980 For the efficient cleaning of medium-sized industrial premises Ride-on sweepers for up to 7,200 m 2 /h area coverage Efficient sweeping quick and
More informationRoadheaders. Groundbreaking Solutions for Mining & Tunnelling.
Roadheaders Groundbreaking Solutions for Mining & Tunnelling www.schmittwerke.com Features Benefits Robust, modular design Durability Ease of transport and assembly Transverse ripping cutting heads Suitable
More informationIndustrial Batteries / Network Power
Industrial Batteries / Network Power Back-up power (UPS) Hybrid & green deployment Renewable energy management Grid power quality U Optimizing or replacing genset Generation smoothing Grid stabilization
More informationPRODUCT CATALOG BEARING HOUSINGS In-house Manufacturing.
PRODUCT CATALOG BEARING HOUSINGS In-house Manufacturing. Individually Optimized Bearings. Significant Price Advantage. SIMPLY WELL- ENGINEERED PRODUCT CATALOG BEARING HOUSINGS 4 LFD BEARING HOUSINGS Product
More informationSecure your Production. Fill-controlled Fluid Couplings.
Secure your Production. Fill-controlled Fluid Couplings. Start-up Components We are the experts in constant-fill and fill-controlled fluid couplings at Voith Turbo. Voith Turbo, the specialist for hydrodynamic
More informationUV-applications in the automotive industry. Oliver Starzmann, IST METZ GmbH, Germany
UV-applications in the automotive industry Oliver Starzmann, IST METZ GmbH, Germany 1. General advantages and applications of the UV-technology The importance of light curing as a basis of low emission
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping 84 The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester
More informationProven Performance Quality Product Flexibility in Design On-time Delivery
Belt Cleaners Since 2007 TS Global has specialised in the manufacture of a comprehensive range of high quality conveyor accessories and polyurethane components. Our engineering and manufacturing expertise
More informationHow do you make your vehicles fit for the future?
How do you make your vehicles fit for the future? Refurbishment and accident repair Enhancing the attractiveness of your vehicles Answers for mobility. 1 2 Today and tomorrow: Guaranteed availability Reduced
More informationPower Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox.
202 www.powerjacks.com Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox. Our expertise has been built on a history of engineering
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationTo combat risks associated with wear, slippage and build up on a pulley, it is industry standard to apply pulley lagging on all pulleys.
Pulley Lagging Since 2007 TS Global has specialised in the manufacture of a comprehensive range of high quality conveyor accessories and polyurethane components. Our engineering and manufacturing expertise
More informationConveyor Belt Group. Cleat Brochure 2017 Profiled and Cleated Belts.
Conveyor Belt Group Cleat Brochure 2017 Profiled and Cleated Belts www.contitech.us 2017 Cleat Brochure Cleated Belts Continental Select is dedicated to equipping your operation for the most grueling conveying
More informationROLLING BEARINGS PRODUCTS AND CONSULTATION.
ROLLING BEARINGS PRODUCTS AND CONSULTATION. ROLLING BEARINGS LINEAR TECHNOLOGY USE OUR STRENGHTS FOR YOUR SUCCSESS! PRODUCT GROUPS 8-11 ROLLING BEARINGS 6/7 CONTENTS. 12/13 LABORATORY & ANALYSIS 14/15
More informationiglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
More informationTravel Drives by Liebherr. Series-production Gearboxes
Travel Drives by Liebherr Series-production Gearboxes Travel drives by Liebherr For about 40 years, Liebherr has been developing, designing and producing high-performance, versatile travel drives (FAT)
More informationSlide-Lag. REPLACEABLE Pulley Lagging for Drive Pulleys Superior Traction for Conveyor and Elevator Systems
Brochure PL 0 (-0) Replaces PL 0 (-) Slide-Lag REPLACEABLE Pulley Lagging for Drive Pulleys Superior Traction for Conveyor and Elevator Systems ENGINEERED LAGGING for engineered conveyor and elevator systems
More informationMotors and Gearboxes for Biomass Heating Systems. Energy efficient Durable Quiet as a whisper Compact
Motors and Gearboxes for Biomass Heating Systems Energy efficient Durable Quiet as a whisper Compact Reliability in many areas ABM Greiffenberger develops and manufactures innovative drive unit solutions
More informationMining Machines Division BELT CONVEYORS
BELT CONVEYORS BELT CONVEYORS Belt conveyors are intended for transport of loose materials. They meet requirements for use in gassy coal-mines with danger of methane and coal dust explosion. Belt width
More informationiglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
More informationbrand philosophy: the optimal price and quality ratio
brand philosophy: the optimal price and quality ratio EGT brand has been established in 2005. Over the time we have developed a wide range of high quality products. The current EGT range consists of about
More informationOverrunning Alternator Pulleys. Smooth Running For A Long Life.
Overrunning Alternator Pulleys Smooth Running For A Long Life. The content of this brochure is not legally binding and is solely intended for information purposes. Where legally permissible, all liability
More informationMultidisc Mowers GMD and 77HD SELECT
Multidisc Mowers GMD 44-55 - 66 and 77HD SELECT GRASS HARVESTING AT ITS BEST! Multidisc Mowers GMD series 44-55 - 66 and 77HD SELECT The achievement of several decades of experience... 1 A respectable
More informationHigh-Tech Waterjet Cutting
6,200 bar High-Pressure Innovations STREAMLINE PRO-I ultra high-pressure pumps PRO series cutting heads AMS PRO abrasive management system PSC PRO installation parts High-Tech Waterjet Cutting About KMT
More informationTHIELE company profile
Bucket-Elevator Chains THIELE company profile The THIELE company The THIELE Company was founded more than 75 years ago and is now one of the world s foremost chain manufacturers. THIELE s product line
More informationOverview. KNOTT brakes overview The basics for around 2000 solutions BRAKES. We make your brake
Overview BRAKES KNOTT brakes overview The basics for around 2000 solutions www.knott.de We make your brake KNOTT develops and produces individual brake solutions for all branches: from agriculture and
More informationUltra-Matic Air Valve System
Ultra-Matic Air Valve System Efficient Pumps, Competitive Upgrades and Accessories U2 Plastic Pumps Metallic Pumps Specialty Pumps Upgrade Kits Accessories Diaphragms Ultra-Matic Air Valve Technology Simple.
More informationLow Rolling Resistance & Bandag Retreads. HELPING YOU HELP THE ENVIRONMENT.
Low Rolling Resistance ECOPIA TRUCK TYRES & Bandag Retreads. HELPING YOU HELP THE ENVIRONMENT. Bridgestone takes up the environmental challenges of today and tomorrow with Ecopia Bridgestone aims to be
More informationPrimary Shredder. Diesel / Electric Type 450/650/750/850/950
Primary Shredder Diesel / Electric Type 450/650/750/850/950 Technical Specifications The HAMMEL-primary shredder processes extremely difficult materials like waste wood, railway sleepers, root stems, green
More informationTownsend Bearings. Rosta Tensioner Devices. Revision 1
Townsend Bearings Rosta Revision 1 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More informationPumps. Everything flows quickly and efficiently. The pump program from Wacker Neuson.
G DI T F C S Pumps S ST S SA SC Everything flows quickly and efficiently. The pump program from Wacker Neuson. A dry jobsite is essential for a smooth work process. Everything flows. Everything is perfect.
More informationYour partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making
Your partner for the realisation of your ideas! Boards, block materials and cast blocks made of polyurethane for model-, tool- and mould making Picture on front page: By kind permission of Werk5 GmbH,
More informationTechnical Description Edition 2007 Mounting, maintenance and repair of propshafts with flanged universal joints
Technical Description Edition 2007 Mounting, maintenance and repair of propshafts with flanged universal joints 1. Recommendations Assembly, disassembly, maintenance and repair of propshafts should be
More informationThe DLR Project Next Generation Train (NGT)
> UIC Energy Efficiency Workshop, Rome > Holger Dittus The DLR Project Next Generation Train (NGT) > 04/10/2017 DLR.de Chart 1 The DLR Project Next Generation Train (NGT) Holger Dittus UIC Energy Efficiency
More informationSCHLITZZYLINDER SERIE RODLESS RTCCYLINDERS OVALDRIVE
SCHLITZZYLINDER RTC SERIES SERIE RODLESS RTCCYLINDERS OVALDRIVE HIGH-POWER MIT OVAL POWER DRIVE 2 RTC series rodless cylinders Features The specific properties of the individual cylinder variants open
More informationMulti-purpose forage wagon. Giga-Vitesse CFS
Giga-Vitesse CFS Gigantic and powerful The Strautmann Giga-Vitesse CFS Giga-Vitesse CFS Large loading capacity and particularly easy towing due to the unique Continuous Flow system (CFS) Loading capacity
More information04 The company 06 Services and process 08 Examples of suspension systems Kits
EN Component and system 04 The company 06 Services and process 08 Examples of suspension systems Kits Finishes 1 Cables 16 s 36 Ceiling attachments 44 Screw caps 48 Connectors lighting.com The company
More informationSarnafil TS E. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 06.2013 Version no. 01 Sarnafil TS 77-18 E Polymeric membrane for roof waterproofing Product Description Sarnafil TS 77-18 E8 E (thickness 1.8 mm) is a Polyester reinforced,
More informationENERGY EFFICIENT DRIVE FOR COAL GRINDING MILLS
ENERGY EFFICIENT DRIVE FOR COAL GRINDING MILLS Abstarct: Since the implementation of vertical roller mill for coal grinding the design concept of the gearboxes to drive the mill changed totally. Based
More informationDS 0002 MOV 2014 DISTITEC Srl
DS 0002 MOV 2014 DISTITEC Srl The realization of this catalog occurred in tighter control of data contained therein. Due to the ongoing technical evolution of our products, we reserve the right to make
More informationDrum brakes According to DIN
Drum brakes According to DIN 15 435 Drum brakes According to DIN 15 435 Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane
More informationKolbenschmidt Pierburg Group
Kolbenschmidt Pierburg Group KS Aluminum Pistons for Truck Applications Requirements The development of on- and off-highway diesel engines for a wide spectrum of applications is affected by global emission
More informationSmall Powered Vacuum Lifters. for horizontal transports. Easy Solutions For Heavy Loads. Small Powered Vacuum Lifters
Small Powered Vacuum Lifters for horizontal transports Picture 1 VACULIFT offers you a wide variety of standard systems for the gentle transport of your loads, also for sensitive products. A tried and
More informationMECHANICAL SHEAR-BOLT CONNECTORS A Best Fit Solution for Jointing Cable Conductors
MECHANICAL SHEAR-BOLT CONNECTORS A Best Fit Solution for Jointing Cable Conductors INTRODUCTION Cable accessories have many decades of outstanding performance around the world. The technology for jointing
More informationSIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
More informationPermanent magnet brakes. Safety from the market leader. PM Line High Torque Line
Permanent magnet brakes Safety from the market leader PM Line High Torque Line Industrial Drive Systems Die Welt von Kendrion Industrial Drive Systems Kendrion The brake experts As a solution provider,
More informationROLL-UP COVERS Standard products
A ROLL-UP COVERS Standard products P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages: Reliability Compact size Extremely high speeds
More informationTOP DRIVE - HTD - CHD 3M - 5M - 8M - 14M APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL. Office-ATM machines
TOP DRIVE - HTD - CHD Performance index TOP DRIVE HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050. This profile has been used for many
More informationCarcass Thickness Belt Thickness Kg/m TS (mm) LS (mm)
Introduction Sythentic fibre materials are increasingly superseding both the natural and semi-synthetic raw materials also in technical applications. PIONEER rubber conveyor belt with fully synthetic inserts
More informationThe new FEIN cordless drill/drivers. Unbeatable in metal.
METAL The new FEIN cordless drill/drivers. Unbeatable in metal. Noticeably improved drilling, tapping and screwdriving applications. 2 FEIN CORDLESS DRILL/DRIVERS FOR METAL Real metalworkers can feel the
More informationElevator parts. Supplier of spare parts for the international bulkhandling industry. Bechtel supplies various components for elevators:
Elevator parts Bechtel supplies various components for elevators: Elevator belting made of rubber or PVC Bucket bolts (DIN 15237) Pulleys Belt fasteners and belt clamps Various types of elevator buckets,
More informationREMANUFACTURED PARTS
REMANUFACTURED PARTS BREATHE NEW LIFE INTO YOUR VEHICLE YEARS WARRANTY ON REMAN ENGINES AND GEARBOXES! * ASK YOUR AUTHORIZED IVECO BUS DEALER FOR MORE INFORMATION. *REMAN ENGINES SINCE JANUARY 2016 AND
More informationEvacuated tube collectors
Evacuated tube collectors Evacuated tube collectors The overall performance of ecological heating systems based on solar thermal energy is significantly dependent on how efficiently the solar collector
More informationConPro 400. Applications. ConPro system. Continuous sausage production for new growth! ConPro_DE_2013_6-7.indd 1 1
Technology Functions Applications ConPro 200 ConPro 400 Products Continuous sausage production for new growth! ConPro_DE_2013_6-7.indd 1 1 EN_12-01_ConPro_2013.indd 16.04.13 12:37 18.04.13 15:34 Technology
More informationNew Generation: GEN 2. Traction aid cable winch Highgrade Harvester front & rear
New Generation: GEN 2 Traction aid cable winch Highgrade Harvester front & rear Features of the HAAS traction aid cable winch GEN 2 Highgrade HAAS - hydraumatic was developed exclusively for integration
More information