Global standards used locally worldwide

Transcription

1 Global standards used locally worldwide List of ISO TC67 standards and their status with API, CEN and various regional and national standards developing organizations September 2016 This report is a revision of the OGP Report No August 2011

2 Table of Contents Table of Contents... 2 Publications... 3 Presentation of the list... 5 Global List of Standards.7 Disclaimer Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither ISO, ISO/TC 67 nor any of its members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms. The document is made available for information purposes only.

3 Publications Global experience The Oil & Gas Industry has access to a wealth of technical knowledge and experience with its members operating around the world in many different terrains. This valuable knowledge for the industry is collated and distilled to use as Global standards used locally worldwide. The foremost aim of international standardization is to facilitate the exchange of goods and services through the elimination of technical barriers to trade. The ISO Technical Committee 67 - "Materials, and offshore structures for the petroleum, petrochemical and natural gas industries" (ISO/TC 67) has the responsibility of establishing standards for most capital used in all streams of the Oil & Gas Industry. The ISO/TC 67 standards also provide common health, safety and environmental requirements. This is the hardware portion used for exploration, production, transportation, and processing of liquid and gaseous hydrocarbons within the petroleum, petrochemical and natural gas industries, and refining of crude oil or natural gas products. The following political, economic, technical, regulatory, legal and social dynamics describe the business environment of the industry sector, products, materials, disciplines or practices related to the scope of ISO/TC 67, and they may significantly influence how the relevant standards development processes are conducted and the content of the resulting standards: The petroleum, petrochemical and natural gas industries is a major industry in most countries' economies. It is one of the major suppliers of energy for the entire world. The industry is involved in the Gross National Product as production/supply or in usage, or both. Petroleum and natural gas provide fuel for heating, lighting, transportation, and mechanization of most of the world. Petrochemical products provide everything from fabrics, plastic, and tyres, to soft drink/water bottles, lubricants, fertilizers, and medicines. The constancy of supply is integral to the functioning of the world economy, and standardized by ISO/TC67 is necessary to assure that supply. Consistent high quality standards With the international standards developed by ISO/TC 67, the need for regional, national or company specifications is reduced, manufacturing and inventory costs are minimized, and regulatory authorities are able to incorporate these standards by reference rather than by restating requirements in regulations. International Standards are the backbone of our society, ensuring the safety and quality of products and services, facilitating international trade and improving the environment in which we live in. Conformity to International Standards helps reassure consumers that products, systems and organizations are safe, reliable and good for the environment. ISO standards can also remove barriers

4 to world trade by providing the technical basis on which political trade agreements can be put into practice, whether they are at the regional or international level. The adoption of standards is entirely voluntary, but companies estimate savings in the millions (U.S. dollars) through having a common set of agreed standards. Numerous studies have shown that standards boost business and economies. The oil and gas industry recognises the need to develop consistent standards. Oil and gas operators, product and service supply organizations in the industry and other interested parties are encouraged to use the standards as a starting point for their operations or to supplement their own policies and regulations which can apply locally. More about the benefits of International Standards can be found on the ISO website.

5 Presentation of the list The vision of the petroleum, petrochemical and natural gas industries standards effort in ISO/TC 67 is global standards used locally worldwide. The purpose of this report is to show where we are in this vision, i.e. which countries have adopted the ISO/TC 67 standards. This report will be periodically updated to show the progress of the standards development and adoption process. The date of update of the information per region/country is mentioned in the list. For up to date information, please consult the public websites of each of the standards development organisations mentioned herein. The list will be available as hardcopy as well as an electronic copy via the ISO/TC 67 website This report focuses on the ISO/TC67 standards only. There are many other standards available for use by the Oil & & Gas industry, developed by ISO or other standards developing organizations like API, CEN, GOST and GSO. References are made to the public websites of these organisations. ISO title and ISO column The basis of this report is the complete list of published ISO/TC 67 standards, including Joint Working Groups (JWG). These standards are developed together with ISO/TC 60/SC2 Gear capacity calculation, ISO/TC 115/SC3 Installation and special application of pumps, ISO/TC 118/SC 1 Process compressors, ISO/TC 153 Valves" and ISO/TC 192 Gas turbines. The list also shows the current edition and whether there are technical and/or amendments issued with the International Standard. The adopted JWG standards in the list might not represent the latest information but will be updated in the next version. ABNT Brazil column This column shows which standards are adopted and published by ABNT as NBR, national Brazilian standard. API USA column This column shows the API standards which have already been re-adopted from the ISO standards. Some state "MOD"; this indicates that there have been some technical changes from the ISO document, whilst those marked IDT are identical adoptions. Also note that all national adoptions are, by definition, American National Standards (ANSI). Some of the indicated documents in the API column are issued by another standards developing organization (e.g. NACE). GOST R Russian Federation column: This column shows which standards are adopted and published by GOST R as Russian standards.

6 CSA - Canada column This column shows which standards are adopted and published by CSA as national Canadian standard. If CSA has not adopted the remaining ISO standards in the list into Canada s national standards system, that doesn t necessarily mean that they are not in use. CEN Europe column It is important to note that the EN standards are also published as national standards in all the 33 European countries members of CEN preferably within 6 months of the publication as EN. The standards listed are technically identical to the corresponding ISO ones (these standards are numbered EN ISO XXXXX); they were accepted in Europe either through the parallel vote procedure or by Unique Acceptance Procedure within the Vienna Agreement between CEN and ISO (ISO lead). All documents are part of the work programme of CEN/TC 12 Materials, and offshore structures for petroleum, petrochemical and natural gas industries, except some which belong to CEN/TC 69 Industrial valves, CEN/TC 282 Installation and for LNG or ECISS/TC 110 Steel tubes, and iron and steel fittings. Some of them (developed by ISO/TC 67/SC2) have a different number in CEN because, if the technical content is identical, their scope in Europe excludes the gas infrastructure industries; they nevertheless have in their title the reference to the ISO initial standards with the indication: (modified). Note that in the EN document the main body of the standard is identical to the ISO one, with a cover page added to the ISO standard. GB China column: The Chinese number of the ISO adopted standard is different from the ISO one. China adopts ISO standards in different ways: Identical, Modified (MOD) and a small number as Not equivalent (NEQ). ST RK Kazakhstan column: Kazakhstan adopts the ISO standards in three different ways: Identical, Modified (MOD) and a small number as Not equivalent (NEQ). GSO Gulf States column This column concerns an additional regional group of countries that are adopting (identical or modified) ISO/TC67 standards. GSO is the Gulf Standardization Organization for the Cooperation Council for the Arab States of the Gulf. GSO currently includes 7 countries: Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, United Arab Emirates and Yemen. Once a standard is adopted by GSO, it is then automatically adopted by the member countries of the Gulf Standards Organization, similar to the CEN process.

7 ISO/TC 67 Chair Management Committe Secretariat NEN SC2 Pipeline transportation systems SC6 Processing and syste ms WG2 Conformity assessment WG8 Materials, corrosion control, welding and NDE SC3 Drilling and completion fluids, and well cements SC7 Offshore Structures WG4 Reliability engineering, and technology WG11 Coating and lining of structures & SC4 Drilling and production SC8 Arctic Operations WG5 Aluminium alloy pipes WG11 WG12 Coating C0 2 aspects and lining of structures & SC5 Casing, tubing And drill pipe SC9 Liquefied natural gas installations and WG7 Materials for use in H 2 S containing environments

8 ISO Edition Amd Cor Revision of Document title TC SC WG Liason TC 67 ABNT - Brazil (update in Q3 2015) ST RK - Kazakhstan (updated in Q3 2014) API - USA (updated in Q1 2016) CEN - Europe (updated in Q3 2015) CSA - Canada (updated in Q3 2015) GB/T - China (updated in Q1 2015) GOST R - Russia (updated in Q1 2016) GSO - Gulf (updated in 2011) ISO 10425:2003 ed. 1 Steel wire ropes for the petroleum and natural gas industries -- Minimum requirements and terms of acceptance TC 105 JWG SC 6 API Spec 9A 25th ed. ISO 10425: 2003 ISO 13709:2009 ed. 2 ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries ISO 13710:2004 ed. 1 Petroleum, petrochemical and natural gas industries -- Reciprocating positive displacement pumps TC 115 SC 3 JWG 1 SC 6 ST RK ISO 13709:2004 (ISO 13707:2003 IDT) TC 115 SC 3 JWG 2 SC 6 ST RK ISO 13710:2006 (ISO 13710:2004 IDT) API Std th edition EN ISO 13709:2009 EN ISO 13710:2004 ISO 21049:2004 ed. 1 Pumps -- Shaft sealing systems for centrifugal and rotary pumps TC 115 SC 3 JWG 2 SC 6 API Std 682:2004/ ISO 21049:2004 EN ISO 21049:2004 ISO 10439:2002 ed. 1 Petroleum, chemical and gas service industries -- Centrifugal compressors TC 118 SC 1 JWG 1 SC 6 ST RK ISO 10439:2004 (ISO 10439:2002 IDT) [revised and split in four parts] ISO :2015 ed. 1 ISO 10439:2002 Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 1: General requirements ISO :2015 ed. 1 ISO 10439:2002 Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 2: Non-integrally geared centrifugal and axial compressors ISO :2015 ed. 1 ISO 10439:2002 Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 3: Integrally geared centrifugal compressors ISO :2015 ed. 1 ISO 10439:2002 Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 4: Expander-compressors ISO 10442:2002 ed. 1 Petroleum, chemical and gas service industries -- Packaged, integrally geared centrifugal air compressors TC 118 SC 1 JWG 1 SC 6 EN ISO :2015 TC 118 SC 1 JWG 1 SC 6 EN ISO :2015 TC 118 SC 1 JWG 1 SC 6 EN ISO :2015 TC 118 SC 1 JWG 1 SC 6 EN ISO :2015 TC 118 SC 1 JWG 1 SC 6 ST RK 10442:2004 (ISO 10442:2002 IDT) EN ISO 10442:2002 ISO 13631:2002 ed. 1 Petroleum and natural gas industries -- Packaged reciprocating gas compressors TC 118 SC 1 JWG 2 SC 6 ST RK ISO 13631:2004 (ISO 13631:2002 IDT) EN ISO 13631:2002 GOST R ISO 13631:2002- Rus. TC 023 ISO 13707:2000 ed. 1 Petroleum and natural gas industries -- Reciprocating compressors TC 118 SC 1 JWG 2 SC 6 ST RK ISO 13707:2004 (ISO 13707:2000 IDT) [status: abandoned] GB/T ISO : 2000 MOD ISO : 2000 ISO :2007 ed. 2 ISO :2000 Petroleum, petrochemical and natural gas industries -- Rotarytype positive-displacement compressors -- Part 1: Process compressors ISO :2001 ed. 1 Petroleum and natural gas industries -- Rotary-type positivedisplacement compressors -- Part 2: Packaged air compressors (oil-free) ISO 17292:2015 ed. 2 ISO 17292:2004 Metal ball valves for petroleum, petrochemical and allied industries TC 118 SC 1 JWG 3 SC 6 ST RK ISO : 2004 (ISO :2000 IDT) TC 118 SC 1 JWG 3 SC 6 ST RK ISO : 2004 (ISO :2001 IDT) API Std 619 5th edition EN ISO :2007 EN ISO :2001 TC 153 SC 1 JWG SC 6 EN ISO 17292:2004 [under CEN TC/69] GB/T ISO 17292:2004 NEQ ISO 10434:2004 ed. 2 ISO 10434:1998 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries TC 153 SC 1 JWG 1 SC 6 ST RK ISO 10434:2006 (ISO 10434:2004 IDT) API th edition / ISO 10434:2001 (MOD) EN ISO 10434:2004 [under CEN/TC 69] GB/T ISO 10434:2004 EQV ISO 15761:2002 ed. 1 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries TC 153 SC 1 JWG 1 SC 6 ST RK 15761:2004 (ISO 15761:2002 IDT) API Std 602 8th ed. / ISO 15761:2002 (MOD) EN ISO 15761:2002 ISO 10497: ed. 3 ISO 10497:2004; ISO 10497:1992 Testing of valves -- Fire type-testing requirements TC 153 SC 1 JWG 6 SC 6 API Std 607 5th edition / ISO EN ISO 10497: [under CEN/TC 69] ST CKBA (GOST R in plan 2013) ISO :2004 ed. 2 ISO :2002 Gas turbines -- Procurement -- Part 3: Design requirements TC 192 SC 6 WG 4 SC 6 ISO :2001 ed. 1 Gas turbines -- Procurement -- Part 5: Applications for petroleum and natural gas industries TC 192 SC 6 WG 4 SC 6 EN ISO : COR1:2007 ISO :2002 ed. 1 Gas turbines -- Procurement -- Part 7: Technical information TC 192 SC 6 WG 4 SC 6 ISO :2002 ed. 1 Gas turbines -- Procurement -- Part 8: Inspection, testing, installation and commissioning ISO 13691:2001 ed. 1 Petroleum and natural gas industries -- High-speed specialpurpose gear units TC 192 SC 6 WG 4 SC 6 TC 60 SC 2 JWG SC 6 EN ISO 13691:2002 ISO :2009 ed. 2 ISO :2001 Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 1: Induction bends ISO :2003 ed. 1 Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 2: Fittings TC 67 SC 2 WG 10 ST RK ISO :2011 (ISO :2009, IDT) TC 67 SC 2 WG 10 ST RK ISO :2007 (ISO :2003, IDT) EN :2011 [ISO :2009 modified] EN :2004 [ISO :2003 modified] GB/T MOD GSO ISO : GB/T MOD GSO ISO :2008 ISO :2004 ed. 1 Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 3: Flanges TC 67 SC 2 WG 10 ST RK ISO :2007 (ISO :2004, IDT) EN :2004 [ISO :2004 modified) GB/T MOD GSO ISO : 2008 ISO :2015 ed. 2 ISO :2003 Petroleum and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 1: On-land pipelines ISO :2012 ed. 2 ISO :2004 Petroleum, petrochemical and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 2: Offshore pipelines ISO 16708:2006 ed. 1 Petroleum and natural gas industries -- Pipeline transportation systems -- Reliability-based limit state methods TC 67 SC 2 WG 11 ST RK ISO : (ISO :2003, IDT) TC 67 SC 2 WG 11 ST RK ISO :2007 (ISO :2004, IDT) TC 67 SC 2 WG 12 ST RK ISO 16708:2008 (ISO 16708:2006, IDT) NACE SP /ISO :2012 [scope of CEN/TC 219] ISO :2003 NEQ GSO ISO :2008 EN ISO :2014 [under CEN/TC 219] GSO ISO :2008 EN ISO 16708:2006 ISO 16708:2006 IDT GSO ISO 16708:2008 ISO 13623:2009 ed. 2 ISO 13623:2000 Petroleum and natural gas industries -- Pipeline transportation systems ISO :2011 ed. 1 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) ISO :2014 ed. 2 Cor 1:2008 ISO :2007 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings ISO :2016 ed. 2 ISO :2008 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 3: Field joint coatings ISO :2009 ed. 1 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 4: Polyethylene coatings (2-layer PE) ISO : ed. 1 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 5: External concrete coatings ISO 21329:2004 ed. 1 Petroleum and natural gas industries -- Pipeline transportation systems -- Test procedures for mechanical connectors TC 67 SC 2 WG 13 ST RK ISO 13623: (ISO 13623:2009, IDT); СНиП РК ; ST RK EN 14161: A1:2015 [ISO 13623:2009 modified] TC 67 SC 2 WG 14 EN ISO :2011 [under ECISS/TC 110] TC 67 SC 2 WG 14 ST RK ISO : (ISO :2007, IDT) TC 67 SC 2 WG 14 ST RK ISO : (ISO :2008, IDT) TC 67 SC 2 WG 14 ST RK ISO : (ISO :2009, IDT) TC 67 SC 2 WG 14 ST RK ISO :2012 (ISO :, IDT) TC 67 SC 2 WG 15 ST RK ISO 21329:2007 (ISO 21329:2004, IDT) (National Adoption under committee consideration) EN ISO :2014 [under ECISS/TC 110] [scope of ECISS/TC 110] [scope of ECISS/TC 110] EN ISO : [under ECISS/TC 110)] ISO 13623:2009 MOD GSO ISO 13623:2008 ISO :2011 ISO :2007 GOST R ISO (ISO :2007, IDT), TC 357 GSO ISO :2008 +COR1 ISO :2008 GSO ISO :2008 GSO ISO :2011 GSO ISO : EN ISO 21329:2004 GSO ISO 21329:2008 ISO 3183:2012 ed. 3 ISO 3183:1980; IS Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems TC 67 SC 2 WG 16 ST RK ISO 3183:2011 (ISO 3183:2007, IDT); GOST ISO (ISO 3183:2007, IDT) API 5L, 45th ed (MOD) + Errata 1:2015 EN ISO 3183:2012 [under ECISS/TC 110] GB/T 9711 IDT Under Revision Adopted previous ISO 3183 revision in 3 parts -1, -2, -3, IDT GSO ISO 3183:2008 ISO/TS 12747:2011 ed. 1 Petroleum and natural gas industries -- Pipeline transportation systems -- Recommended practice for pipeline life extension TC 67 SC 2 WG 17 ST RK ISO/ТУ 24817: (ISO/TS 24817:2006, IDT) CEN ISO/TS 12747:2013 ISO/TS 12747:2011 IDT GSO ISO 12747:2012 ISO 12490:2011 ed. 1 Petroleum and natural gas industries -- Mechanical integrity and sizing of actuators and mounting kits for pipeline valves TC 67 SC 2 WG 18 pren ISO [status: abandoned] ISO 12736:2014 ed. 1 Petroleum and natural gas industries -- Wet thermal insulation coatings for pipelines, flow lines, and subsea structures TC 67 SC 2 WG 19 EN ISO 12736:2014 ISO 14313:2007 ed. 2 ISO 14313:1999 Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves TC 67 SC 2 WG 2 ST RK ISO 14313:2012 (ISO 14313:2007, IDT) API Spec 6D, 24th ed.:2014 (MOD) EN 13942: [ISO 14313:2007 modified] ISO 14313:2007 MOD GOST R (ISO 14313:2007, NEQ), TC 259 GSO ISO 14313:2008(to be updated to include Cor1) ISO 13847:2013 ed. 2 ISO 13847:2000 Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines TC 67 SC 2 WG 8 ST RK ISO 13847:2012 (ISO 13847:2000, IDT) [latest edition not adopted EN 14163: AC:2006 (ISO 13847:2000 modified)] GSO ISO 13847:2008

9 ISO 14723:2009 ed. 2 CD Cor 1:2009 ISO 14723:2001 Petroleum and natural gas industries -- Pipeline transportation systems -- Subsea pipeline valves TC 67 SC 2 WG 9 ST RK ISO 14723:2006 (ISO 14723:2001, IDT) API Spec 6DSS 2nd ed.:2009 (MOD) EN ISO 14723:2009 ISO : 2001 (not latest revision) GSO ISO 14723: ISO :2008 ed. 2 ISO :2001 Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 1: Water-based fluids TC 67 SC 3 WG 1 ST RK ISO :2012 (ISO :2008, IDT) API RP 13B-1 4th ed.:2009 (MOD) EN ISO :2008 ISO :2008 IDT GSO ISO :2009 ISO :2011 ed. 2 NP Amd 1:2011 NP Cor 1:2011 ISO :2002 Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 2: Oil-based fluids TC 67 SC 3 WG 1 ST RK ISO :2012 (ISO :2011, IDT) API RP 13B 2 5th ed (MOD) EN ISO :2011 ISO :2011 MOD GSO ISO :2009 ISO 10416:2008 ed. 2 ISO 10416:2002 Petroleum and natural gas industries -- Drilling fluids -- Laboratory testing ISO 13501:2011 ed. 2 ISO 13501:2005 Petroleum and natural gas industries -- Drilling fluids -- Processing evaluation TC 67 SC 3 WG 1 ST RK ISO 10416:2012 (ISO 10416:2008, IDT) TC 67 SC 3 WG 1 ST RK ISO 13501:2011 (ISO 13501:2005, IDT) API RP 13I 8th ed. / ISO 10416:2009 API RP 13C 5th edition:2014 (MOD) EN ISO 10416:2009 ISO 10416:2008 MOD GSO ISO 1O416 : 2009 EN ISO 13501:2011 ISO :2009 ed. 3 Cor 1:; Cor ISO :2000; IS Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 1: Specification TC 67 SC 3 WG 2 ST RK ISO :2011 (ISO :2009, IDT) API Spec 10A 24th EN ISO :2009 ISO :2009 MOD ISO :2003 ed. 1 Amd 1:2005 Cor 1:2006 Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 2: Testing of well cements TC 67 SC 3 WG 2 ST RK ISO :2012 (ISO :2003, IDT) API RP 10B-2nd ed.:2013 (MOD) EN ISO : AC:2007 ISO :2004 ed. 1 Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure ISO :2008 ed. 1 Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 6: Methods for determining the static gel strength of cement formulations ISO :2001 ed. 2 ISO 10427:1993 Petroleum and natural gas industries -- Equipment for well cementing -- Part 1: Casing bow-spring centralizers ISO :2004 ed. 2 ISO 10427:1993 Petroleum and natural gas industries -- Equipment for well cementing -- Part 2: Centralizer placement and stop-collar testing TC 67 SC 3 WG 2 ST RK ISO :2011 (ISO :2004, IDT) TC 67 SC 3 WG 2 ST RK ISO :2011 (ISO :2008, IDT) TC 67 SC 3 WG 2 ST RK ISO :2004 (ISO :2001, IDT) TC 67 SC 3 WG 2 ST RK ISO :2011 (ISO :2004, IDT) API RP 10B-4 2nd ed. :2015 (MOD) API RP 10B-6 1st ed. Pending Publication ISO :2008 API Spec 10D 6th ed. ISO :2001 API RP 10D-2 1st ed. / ISO :2004 EN ISO :2004 EN ISO :2008 EN ISO :2001 EN ISO :2004 ISO :2001 IDT ISO :2004 IDT ISO :2003 ed. 2 ISO 18165:2001 Petroleum and natural gas industries -- Equipment for well cementing -- Part 3: Performance testing of cementing float TC 67 SC 3 WG 2 ST RK ISO :2004 (ISO :2003, IDT) API RP 10F 3rd ed. / ISO : 2003 EN ISO :2004 ISO :2003 IDT ISO 18165:2001 WITHDRAWN ISO :2003 Petroleum and natural gas industries -- Performance testing of ce TC 67 SC 3 WG 2 ISO :2004 ed. 1 Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure ISO :2011 ed. 2 ISO :2003 Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids ISO :2006 ed. 1 Amd 1:2009 Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations ISO :2005 ed. 1 Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines TC 67 SC 3 WG 3 ST RK ISO :2011 (ISO :2004, IDT) TC 67 SC 3 WG 3 ST RK ISO :2009 (ISO :2003, IDT) TC 67 SC 3 WG 3 ABNT NBR ISO :2011 ST RK ISO :2009 (ISO :2006) TC 67 SC 3 WG 3 ST RK ISO :2009 (ISO :2005, IDT) API RP 10B-5 1st ed. / ISO :2004 API RP 13M 1st edition / ISO :2003 API RP 19C 1st edition / ISO :2006 API RP 13J 5th edition:2014 (MOD) EN ISO :2005 EN ISO :2011 EN ISO : A1:2009 EN ISO : AC:2007 ISO :2006 MOD GSO ISO :2008 (to include Amend 1) ISO :2006 ed. 1 Petroleum and natural gas industries -- Completion fluids and materials -- Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions ISO :2006 ed. 1 Petroleum and natural gas industries -- Completion fluids and materials -- Part 5: Procedures for measuring the long-term conductivity of proppants ISO :2014 ed. 1 Petroleum and natural gas industries -- Completion fluids and materials -- Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions ISO 10407:1993 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Drill stem design and operating limits ISO :2008 ed. 1 Cor 1:2009 ISO 10407:1993 Petroleum and natural gas industries -- Rotary drilling - - Part 2: Inspection and classification of used drill stem elements ISO :2004 ed. 1 Petroleum and natural gas industries -- Rotary drilling - - Part 1: Rotary drill stem elements ISO :2007 ed. 1 Petroleum and natural gas industries -- Rotary drilling - - Part 2: Threading and gauging of rotary shouldered thread connections ISO 13534:2000 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Inspection, maintenance, repair and remanufacture of hoisting ISO 13535:2000 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Hoisting ISO 13626:2003 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Drilling and well-servicing structures ISO 14693:2003 ed. 1 Petroleum and natural gas industries -- Drilling and well-servicing ISO 13354:2014 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Shallow gas diverter TC 67 SC 3 WG 3 ST RK ISO :2009 (ISO :2006, IDT) TC 67 SC 3 WG 3 ST RK ISO :2009 (ISO :2006, IDT) API RP 13M-4 1st ed./ ISO :2006 API RP 19D 1st edition / ISO :2006 TC 67 SC 3 WG 3 EN ISO :2014 TC 67 SC 4 WG 1 ST RK ISO 10407:2004 (ISO 10407:1993 IDT) TC 67 SC 4 WG 1 ST RK ISO :2012 (ISO :2008, IDT) TC 67 SC 4 WG 1 ST RK ISO : 2006 (ISO : 2004 IDT) API RP 7G : 1998 (MOD) +erratum add add API RP 7G-2 1st ed. + errata 2009 API Spec 7-1 1st ed. / ISO :2004 TC 67 SC 4 WG 1 API Spec 7-2 1st ed. ISO :2007 TC 67 SC 4 WG 1 ST RK ISO 13534:2004 (ISO 13534:2000, IDT) TC 67 SC 4 WG 1 ST RK (ISO 13535:2000, NEQ); ST RK ISO 13535: (ISO 13535:2000, IDT) TC 67 SC 4 WG 1 ST RK ISO 13626:2006 (ISO 13626:2003, IDT) TC 67 SC 4 WG 1 ST RK ISO 14693:2006 (ISO 14693:2003, IDT) API RP 8B 8th edition: 2014 (MOD) API Spec 8C 5th edition:2012 (MOD) API Spec 7K 6th ed. :2015 EN ISO :2006 GSO ISO :2008 EN ISO :2006 GSO ISO :2008 [not adopted] EN ISO : EN ISO :2004 TC 67 SC 4 WG 2 EN ISO 13354:2014 GB/T MOD GOST (ISO :2008, MOD) TC 023 EN ISO :2007 GB/T MOD GOST R (ISO :2007, MOD), TC 357 EN ISO 13534:2000 ISO 13534:2000 MOD GOST R ISO (ISO 13534:2000, IDT),TC23 EN ISO 13535:2000 GB/T ISO 13535:2000 IDT GOST R (ISO 13535:2000, MOD), TC 23 EN ISO 13626:2004 ISO 13626:2003 MOD GOST R ISO (ISO 13626:2003, IDT),TC23 EN ISO 14693:2003 ISO 14693:2003 MOD GOST (ISO 14693:2003, IDT), TC 023 GSO ISO : ISO 13533:2001 ed. 1 Cor 1:2005 Petroleum and natural gas industries -- Drilling and production -- Drill-through ISO :2009 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Part 1: Design and operation of marine drilling riser ISO 13625:2002 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Marine drilling riser couplings ISO/TR :200 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report ISO 10423:2009 ed. 4 ISO 10423:1994; ISO 10423:2001; ISO 10423:2003 Petroleum and natural gas industries -- Drilling and production -- Wellhead and christmas tree TC 67 SC 4 WG 2 ST RK ISO 13533:2004 (ISO 13533:2001, IDT) TC 67 SC 4 WG 2 ST RK ISO :2012 (ISO :2009, IDT) TC 67 SC 4 WG 2 ST RK ISO 13625:2009 (ISO 13625:2002, IDT) API Spec16A 3rd edition / ISO 13533:2001 (MOD) + ERR 2005 API Spec 16R (1997) EN ISO 13533: AC:2006 EN ISO :2009 TC 67 SC 4 WG 2 CEN ISO/TR :2013 TC 67 SC 4 WG 3 ST RK ISO 10423:2004 (ISO 10423:2003, IDT); GOST ISO 10423:2012 (ISO 10423:2009, IDT) API Spec 6A 20th ed. ISO 13533:2001 MOD GOST R ISO (ISO 13533:2001, IDT), TC23 ISO :2009 MOD EN ISO 13625:2002 ISO 13625:2002 MOD GOST R (ISO 13625:2002, MOD), TC 023 EN ISO 10423:2009 ISO 10423:2009 MOD GOST R (ISO 10423:2003, MOD)-Rus. TC 023 GSO ISO : ISO 10417:2004 ed. 2 ISO 10417:1993 Petroleum and natural gas industries -- Subsurface safety valve systems -- Design, installation, operation and redress ISO 10428:1993 ed. 1 Petroleum and natural gas industries -- Sucker rods (pony rods, polished rods, couplings and sub-couplings) -- Specification ISO 10431:1993 ed. 1 Petroleum and natural gas industries -- Pumping units -- Specification TC 67 SC 4 WG 4 ST RK ISO 10417:2007 (ISO 10417:2004, IDT) TC 67 SC 4 WG 4 ST RK 1259:2004 (ISO 10428:1993, NEQ); ST RK ISO 10428:2011 (ISO 10428:1993, IDT); GOST (ISO 10428:1993, IDT) TC 67 SC 4 WG 4 ST RK 1260:2004. (ISO 10431:1993, NEQ) API RP 14B 6th ed.:2015 (MOD) No more adopted pren ISO [status: abandoned] EN ISO 10417:2004 ISO 10417:2004 IDT GOST ISO (ISO 10417;2004, IDT), TC 023 pren ISO [status: abandoned] GSO ISO 10417:2009 ISO 10432:2004 ed. 3 ISO 10432:1993; ISO 10432:1999 Petroleum and natural gas industries -- Downhole -- Subsurface safety valve TC 67 SC 4 WG 4 ST RK ISO 10432:2011 (ISO 10432:2004, IDT) API Spec 14A 12th ed. : 2015 (MOD) EN ISO 10432:2004 ISO 10432:2004 MOD GOST ISO (ISO 10432:2004, IDT), TC 023 ISO 14310:2008 ed. 2 ISO 14310:2001 Petroleum and natural gas industries -- Downhole -- Packers and bridge plugs TC 67 SC 4 WG 4 ST RK ISO 14310:2011 (ISO 14310:2008, IDT); ST RK 1253:2004 (ISO 14310:2001, MOD) API Spec 11D1 3rd ed.:2015 EN ISO 14310:2008 ISO 14310:2008 MOD GOST ISO (ISO 14310:2008, IDT), TC 023 GSO ISO : 2009

10 ISO 14998:2013 ed. 1 Petroleum and natural gas industries -- Downhole -- Completion accessories ISO :2009 ed. 2 ISO :2001 Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps TC 67 SC 4 WG 4 EN ISO 14998:2013 TC 67 SC 4 WG 4 ST RK ISO :2012 (ISO :2009, IDT) API Spec 11D2 1st editio EN ISO :2009 ISO :2009 MOD ISO :2006 ed. 1 Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems TC 67 SC 4 WG 4 ST RK ISO : (ISO :2006, IDT) API Std 11D3 1st ed./ ISO :2006 EN ISO :2006 ISO :2006 MOD ISO :2015 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Part 1: Electric submersible pump systems for artificial lift ISO 16070:2005 ed. 2 ISO 16070:2001 Petroleum and natural gas industries -- Downhole -- Lock mandrels and landing nipples TC 67 SC 4 WG 4 EN ISO :2015 TC 67 SC 4 WG 4 ST RK ISO 16070:2011 (ISO 16070:2005, IDT) API Spec 14L 2nd ed. / ISO 16070:2005 EN ISO 16070:2005 ISO 16070:2005 MOD ISO :2004 ed. 1 Amd 1: Petroleum and natural gas industries -- Drilling and production -- Part 1: Side-pocket mandrels ISO :2007 ed. 1 Amd 1: 2007 Cor 1:2009 Petroleum and natural gas industries -- Drilling and production -- Part 2: Flow-control devices for side-pocket mandrels ISO :2009 ed. 1 Petroleum and natural gas industries -- Drilling and production -- Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels ISO : ed. 1 Petroleum and natural gas industries -- Drilling and production -- Part 4: Practices for side-pocket mandrels and related ISO 17824:2009 ed. 1 Petroleum and natural gas industries -- Downhole -- Sand screens ISO 28781: ed. 1 Petroleum and natural gas industries -- Drilling and production --Subsurface barrier valves and related TC 67 SC 4 WG 4 ST RK ISO : (ISO :2004, IDT) TC 67 SC 4 WG 4 ST RK ISO : (ISO :2007, IDT) TC 67 SC 4 WG 4 ST RK ISO : (ISO :2009, IDT) TC 67 SC 4 WG 4 ST RK ISO :2012 (ISO :, IDT) TC 67 SC 4 WG 4 ST RK ISO 17824:2011 (ISO 17824:2009, IDT) TC 67 SC 4 WG 4 ST RK ISO 28781:2011 (ISO 28781:, IDT) API Spec 19G1 1st API Spec 19G2 1st API Spec 19G3 1st API Spec 19G4 1st EN ISO : A1: EN ISO : ISO :2004 MOD GOST ISO (ISO :2004, IDT), TC023 GOST ISO (ISO :2007, IDT), TC023 EN ISO :2009 GOST ISO (ISO :2009, IDT), TC023 EN ISO : ISO/TS :2014 ed. 1 Well integrity -- Part 2: Well integrity for the operational phase TC 67 SC 4 WG 4 CEN ISO/TS :2015 [status: to be published soon] ISO 10420:1994 WITHDRAWN Petroleum and natural gas industries -- Flexible pipe systems for subsea and marine riser applications TC 67 SC 4 WG 6 EN ISO 17824:2014 ISO 17824:2009 MOD GOST (ISO 17824:2009, MOD), TC23 EN ISO 28781: GOST (ISO 28781:, MOD), TC023 GSO ISO : GSO ISO : GSO ISO : GSO ISO : ISO :2005 ed. 2 Amd 1: ISO :1999 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations ISO :2005 ed. 1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe ISO :2007 ed. 1 Cor 1:2008 ISO 10420:1994 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 11: Flexible pipe systems for subsea and marine applications ISO :2011 ed. 1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 15: Subsea structures and manifolds ISO :2006 ed. 2 Cor 1:2009 ISO :2000 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 2: Unbonded flexible pipe systems for subsea and marine applications ISO :2000 ed. 1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems ISO : ed. 2 Cor 1: 2011 ISO :1999 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 4: Subsea wellhead and tree ISO :2009 ed. 2 ISO :2002 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 5: Subsea umbilicals TC 67 SC 4 WG 6 ST RK ISO :2009 (ISO :2005, IDT) API RP 17A 4th edition / ISO :2005 TC 67 SC 4 WG 6 API Spec 17K 2nd TC 67 SC 4 WG 6 API RP 17B 5th edition:2014 (MOD) EN ISO : A1: EN ISO :2006 EN ISO : TC 67 SC 4 WG 6 EN ISO :2011 TC 67 SC 4 WG 6 ST RK ISO :2009 (ISO :2006, IDT) API Spec 17J 4th ed. :2014 (MOD) TC 67 SC 4 WG 6 API RP 17C 2nd edition TC 67 SC 4 WG 6 API Spec 17D 2nd TC 67 SC 4 WG 6 ST RK ISO :2009 (ISO :2002, IDT) API Spec 17E 4th edition EN ISO : ISO :2005 IDT GSO ISO : ISO :2007 ISO :2006 IDT GOST R ISO (ISO :2006, IDT), TC 023 EN ISO :2000 ISO :2000 IDT GOST R ISO (ISO :2000, IDT),TC 023 EN ISO : + AC:2011 GSO ISO :2009 GSO ISO :2009 ISO : MOD GSO ISO :2009 EN ISO :2009 ISO :2009 IDT GSO ISO :2009 ISO :2006 ed. 2 ISO :2000 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems ISO :2005 ed. 1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems ISO :2002 ed. 1 Cor 1:2005 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems ISO :2000 ed. 1 Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems ISO 10405:2000 ed. 2 ISO 10405:1993 Petroleum and natural gas industries -- Care and use of casing and tubing TC 67 SC 4 WG 6 API STD 17F, 3rd ed. : 2014 (MOD) TC 67 SC 4 WG 6 API RP 17G 2nd ed. / ISO :2005 TC 67 SC 4 WG 6 API RP 17H 2nd ed.:2013 (MOD) TC 67 SC 4 WG 6 Became part of API RP 17H; withdrawel of API RP 17M 1st ed. TC 67 SC 5 WG 1 ST RK (ISO 10405:2000, NEQ); ST RK ISO 10405:2011 (ISO 10405:2000, IDT); GOST ISO (ISO 10405:2000, IDT) EN ISO :2006 ISO :2006 IDT EN ISO :2006 ISO :2005 EN ISO :2006 ISO :2002 IDT GSO ISO :2009 EN ISO :2006 ISO :2000 IDT EN ISO 10405:2006 GB/T IDT GOST R (ISO 10405:2000, MOD),TC 357 ISO 11960:2014 ed. 5 ISO 2645:1975; ISO 11960:1996; ISO 11960:2001; ISO 11960:2004; ISO Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells TC 67 SC 5 WG 1 GOST , (ISO 11960:2004, MOD); ST RK ISO 11960:2009 (ISO 11960:2004, IDT) API Spec 5CT 9th ed.:2011 (MOD) EN ISO 11960:2014 GB/T IDT Under Revision 11960:2011 ISO 11961:2008 ed. 2 Cor 1:2009 ISO 11961:1996 Petroleum and natural gas industries -- Steel drill pipe TC 67 SC 5 WG 1 ST RK ISO 11961:2009 (ISO 11961:2008, IDT) API Spec 5DP 1st ed./ ISO 11961:2008 EN ISO 11961: GB/T MOD GOST (ISO 11961:2008, GSO ISO : 2009 MOD), TC 357 ISO 15463:2003 ed. 1 Cor 1:2009 Petroleum and natural gas industries -- Field inspection of new casing, tubing and plain-end drill pipe TC 67 SC 5 WG 1 ST RK ISO 15463:2006 (ISO 15463:2003, IDT) API RP 5A5 7th edition/i EN ISO 15463: GB/T IDT ISO 13679:2002 ed. 1 Petroleum and natural gas industries -- Procedures for testing casing and tubing connections TC 67 SC 5 WG 2 ST RK 1262:2004 (ISO 13679:2002, NEQ) API RP 5C5 3rd edition / ISO 13679:2002 EN ISO 13679:2006 GB/T IDT ISO/PAS 12835:2013 ed. 1 Qualification of casing connections for thermal wells TC 67 SC 5 WG 2 [Not adopted] GB/T MOD Under Revision ISO/TR 10400:2007 ed. 1 ISO 10400:1993 Petroleum and natural gas industries -- Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing ISO 13680: ed. 3 ISO 13680:2000; ISO 13680:2008 Petroleum and natural gas industries -- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock -- Technical delivery conditions ISO 13678: ed. 3 ISO 13678:2000; IS Petroleum and natural gas industries -- Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements TC 67 SC 5 WG 2 ST RK ISO/TS (ISO/TR 10400:2007, IDT) TC 67 SC 5 WG 3 ST RK ISO 13680:2012 (ISO 13680:, IDT) TC 67 SC 5 WG 4 ST RK 1264:2004 (ISO 13678:2000, MOD); ST RK ISO 13678:2011 (ISO 13678:, IDT) API TR 5C3, 7th ed./ ISO 10400:2008 API Spec 5CRA 1st edition (MOD) API RP 5A3 3rd edition:2009 CEN ISO/TR 10400:2011 GB/T IDT GSO ISO/TR : 2009 EN ISO 13680: GB/T IDT Under Revision GSO ISO : EN ISO 13678:2012 GB/T MOD Under Revision GOST R ISO (ISO , IDT), TC 357 GSO ISO : ISO 10418:2003 ed. 2 Cor 1:2008 ISO 10418:1993 Petroleum and natural gas industries -- Offshore production installations -- Analysis, design, installation and testing of basic TC 67 SC 6 WG 1 ST RK ISO 10416:2012 (ISO 10416:2008, IDT) EN ISO 10418: GSO ISO : surface process safety systems ISO 10418:2003 ed. 2 Cor 1:2008 ISO 10418:1993 Petroleum and natural gas industries -- Offshore production installations -- Process safety systems TC 67 SC 6 WG 1 ST RK 10418:2005 (ISO 10418:2003 IDT) EN ISO 10418: GSO ISO : ISO 13702:2015 ed. 2 ISO 13702:1999 Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -- TC 67 SC 6 WG 1 ST RK ISO 13702:2006 (ISO 13702:1999, IDT) EN ISO 13702:2015 GB/T ISO 13702:1999 IDT GSO ISO : Requirements and guidelines ISO 15544:2000 ed.1 Amd 1:2009 Petroleum and natural gas industries -- Offshore production installations -- Requirements and guidelines for emergency TC 67 SC 6 WG 1 ST RK ISO 15544:2006 (ISO 15544:2000, IDT) EN ISO 15544: response

11 ISO 17776:2000 ed. 1 Petroleum and natural gas industries -- Offshore production installations -- Major Accident hazard management during the design of new installations ISO 15138:2007 ed. 2 ISO 15138:2000 Petroleum and natural gas industries -- Offshore production installations -- Heating, ventilation and air-conditioning TC 67 SC 6 WG 1 ST RK ISO 17776:2004 (ISO 17776:2000, IDT) TC 67 SC 6 WG 11 ST RK ISO 15138:2006 (ISO 15138:2000, IDT) EN ISO 17776:2002 GOST R ISO (ISO 17776:20000, IDT), TC 023 EN ISO 15138:2007 ISO 15138:2007 GSO ISO : ISO/TS 27469: ed. 1 Petroleum, petrochemical and natural gas industries - Method of test for fire dampers TC 67 SC 6 WG 11 CEN ISO/TS 27469:2011 ISO 23251:2006 WITHDRAWN Amd 1:2008 Cor 1:2007 Petroleum, petrochemical and natural gas industries -- Pressurerelieving and depressuring systems TC 67 SC 6 WG 12 ST RK ISO 23251: (ISO 23251:2006, IDT) API Std 521 6th edition:2014 (MOD) EN ISO 23251:2007 [status: withdrawn] GSO ISO : 2008 ISO 28300:2008 ed. 1 Cor 1:2009 Petroleum, petrochemical and natural gas industries -- Venting of atmospheric and low-pressure storage tanks TC 67 SC 6 WG 12 ST RK ISO 28300: (ISO 28300:2008, IDT) API Std 2000, 7th ed.:2014 (MOD) EN ISO 28300: GSO ISO : Corr 1 : ISO :2007 ed. 2 ISO :2003 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 1: General requirements ISO :2007 ed. 2 ISO :2003 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 2: Special-purpose oil systems ISO :2007 ed. 2 ISO :2003 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 3: General-purpose oil systems ISO :2007 ed. 2 ISO :2003 Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 4: Self-acting gas seal support systems ISO 10437:2003 ed. 2 ISO 10437:1993 Petroleum, petrochemical and natural gas industries -- Steam turbines -- Special-purpose applications TC 67 SC 6 WG 2 API Std 614 5th edition / ISO , 2, 3, 4 TC 67 SC 6 WG 2 API Std 614 5th edition / ISO , 2, 3, 4 TC 67 SC 6 WG 2 API Std 614 5th edition / ISO , 2, 3, 4 TC 67 SC 6 WG 2 API Std 614 5th edition / ISO , 2, 3, 4 (MOD) TC 67 SC 6 WG 3 ST RK ISO 10437:2012 (ISO 10437:2003, IDT) API Std 612 7th edition:2014 (MOD) EN ISO :2007 EN ISO :2007 EN ISO :2007 EN ISO :2007 EN ISO 10437:2003 GSO ISO 10437:2008 ISO 13703:2000 ed. 1 Cor 1:2002 Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms TC 67 SC 6 WG 5 ST RK ISO 13703:2006 (ISO 13703:2000, IDT) EN ISO 13703: AC:2007 ISO 13703:2000 IDT GSO ISO : ISO :2002 ed. 1 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials ISO :2002 ed. 1 Cor 1:2005 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture TC 67 SC 6 WG 5 ST RK :2004 (ISO :2002, MOD) TC 67 SC 6 WG 5 ST RK :2004 (ISO :2002, MOD) EN ISO :2002 GB/T IDT GSO ISO :2008 EN ISO : AC:2006 GB/T IDT GSO ISO :2008 ISO :2002 ed. 1 Cor 1:2005 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design TC 67 SC 6 WG 5 ST RK :2004 (ISO :2002, MOD) EN ISO : AC:2006 GB/T IDT Under Revision GSO ISO :2008 ISO :2002 ed. 1 Cor 1:2006 Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation TC 67 SC 6 WG 5 ST RK :2004 (ISO :2002, MOD) EN ISO : AC:2007 GB/T IDT Under Revision GSO ISO :2008 ISO 15649:2001 ed. 1 Petroleum and natural gas industries -- Piping TC 67 SC 6 WG 5 ABNT NBR ISO : 2004 ST RK ISO 15649:2011 (ISO 15649:2001, IDT); ST RK 1267:2004 (ISO 15649:2001, MOD) CEN/TR 14549:2004 [Guide to use ISO 15649:2001 in EU context] GB/T ~ ISO 15649:2001 NEQ ISO 24817:2015 ed. 1 ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries -- Composite repairs for pipework -- Qualification and design, installation, testing and inspection ISO 27509:2012 ed. 1 Cor 1:2013 Petroleum and natural gas industries -- Compact flanged connections with IX seal ring ISO 12211:2012 ed. 1 Petroleum, petrochemical and natural gas industries -- Spiral plate heat exchangers TC 67 SC 6 WG 5 ST RK ISO/ТУ 24817: (ISO/TS 24817:2006, IDT) TC 67 SC 6 WG 5 EN ISO 27509: AC:2013 TC 67 SC 6 WG 8 EN ISO 12211:2012 EN ISO 24817:2015 GSO ISO : ISO 12212:2012 ed. 1 Petroleum, petrochemical and natural gas industries -- Hairpintype heat exchangers TC 67 SC 6 WG 8 EN ISO 12212:2012 ISO 13704:2007 ed. 2 Cor 1:2008 ISO 13704:2001 Petroleum, petrochemical and natural gas industries -- Calculation of heater-tube thickness in petroleum refineries TC 67 SC 6 WG 8 ST RK ISO 13704:2011 (ISO 13704:2007, IDT) API Std 530 7th edition:2015 (MOD) EN ISO 13704: GSO ISO 13704:2008 ISO 13705:2012 ed. 3 ISO 13705:2001; ISO 13705:2006 ISO 13706:2011 ed. 3 ISO 13706:2000; ISO 13706:2005 Petroleum, petrochemical and natural gas industries -- Fired heaters for general refinery service Petroleum, petrochemical and natural gas industries -- Air-cooled heat exchangers TC 67 SC 6 WG 8 Std 560 4th edition (MOD) TC 67 SC 6 WG 8 ST RK ISO 13706:2009 (ISO 13706:2005, IDT); GOST ISO 13706:2011 (ISO 13706:2000, IDT) API Std 661 7th edition:2013 (MOD) EN ISO 13705:2012 GOST R (ISO 13705:2005, MOD), TC 023 GSO ISO 13705:2008 EN ISO 13706:2011 GSO ISO 13706:2008 ISO :2005 ed. 1 ISO 15547:2000 Petroleum, petrochemical and natural gas industries -- Plate-type heat exchangers -- Part 1: Plate-and-frame heat exchangers ISO :2005 ed. 1 ISO 15547:2000 Petroleum, petrochemical and natural gas industries -- Plate-type heat exchangers -- Part 2: Brazed aluminium plate-fin heat exchangers ISO 16812:2007 ed. 2 ISO 16812:2002 Petroleum, petrochemical and natural gas industries -- Shell-andtube heat exchangers ISO 25457:2008 ed. 1 Petroleum, petrochemical and natural gas industries -- Flare details for general refinery and petrochemical service TC 67 SC 6 WG 8 ST RK ISO 15547:2004 (ISO 15547:2000, IDT) API Std 662 part 1 1st edition / ISO :2005 TC 67 SC 6 WG 8 API Std 662 part 2 1st edition / ISO :2005 TC 67 SC 6 WG 8 ST RK ISO 16812:2004 (ISO 16812:2002, IDT) TC 67 SC 6 WG 8 ST RK ISO 25457:2011 (ISO 25457:2008, IDT) API Std 660 9th ed.:2015 (MOD) API Std 537 2nd ed./ ISO 25457:2008 EN ISO :2005 GOST R ISO (ISO :2005, IDT), TC 023 GSO ISO : 2008 (2nd edition) EN ISO :2005 GSO ISO :2008 (2nd edition) EN ISO 16812:2007 GOST R (ISO 16812:2007, MOD), TC 023 GSO ISO : 2008 EN ISO 25457:2008 GSO ISO : 2009 ISO 10441:2007 ed. 2 ISO 10441:1999 Petroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- Special-purpose applications ISO 14691:2008 ed. 2 ISO 14691:1999 Petroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- General-purpose applications ISO 19900:2013 ed. 2 ISO 19900:2002; ISO :1995 Petroleum and natural gas industries -- General requirements for offshore structures ISO :2016 ed. 2 ISO :2003 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 4: Geotechnical and foundation design considerations ISO :2014 ed. 1 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 8: Marine soil Investigations ISO :2015 ed. 2 ISO :2005 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 1: Metocean design and operating considerations ISO :2004 ed. 1 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria ISO :2014 ed. 2 ISO : Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 3: Topsides structure ISO 19902:2007 ed. 1 ISO :1995 Petroleum and natural gas industries -- Fixed steel offshore structures ISO 19903:2006 ed. 1 Petroleum and natural gas industries -- Fixed concrete offshore structures TC 67 SC 6 WG 9 ST RK ISO 10441:2012 (ISO 10441:2007, IDT) TC 67 SC 6 WG 9 ST RK ISO 14691:2012 (ISO 14691:2008, IDT) TC 67 SC 7 WG 1 ABNT NBR ISO : 2004 ST RK ISO 19900:2006 (ISO 19900:2002, IDT) TC 67 SC 7 WG 10 ST RK ISO :2006 (ISO :2003, IDT) API Std 671 4th edition / ISO 10441:2007 (National Adoption under committee consider.) EN ISO 10441:2007 GSO ISO 10441:2008 EN ISO 14691:2008 GSO ISO 14691:2008 EN ISO 19900:2002 CAN/CSA ISO 19900:14 ISO 19900:2013 IDT GOST R (ISO 19900:2002, IDT), TC 023 EN ISO :2003 CAN/CSA ISO :06 TC 67 SC 7 WG 10 EN ISO :2015 CAN/CSA ISO :15 TC 67 SC 7 WG 3 IN PLAN EN ISO :2005 CAN/CSA ISO :06 TC 67 SC 7 WG 3 ST RK 1967: (ISO :2005, MOD) TC 67 SC 7 WG 3 ST RK ISO :2006 (ISO :2004, IDT) EN ISO :2004 CAN/CSA Z :07 EN ISO : CAN/CSA ISO :15 GSO ISO 19900:2008 TC 67 SC 7 WG 3 EN ISO 19902:2007 CAN/CSA Z19902:09 GSO ISO 19902: TC 67 SC 7 WG 4 EN ISO 19903:2006 CAN/CSA ISO 19903:07 ISO :2013 ed. 2 ISO/TR 13637:1997; ISO :2005 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units TC 67 SC 7 WG 5 ST RK ISO :2006 (ISO :2005, IDT) EN ISO :2013 CAN/CSA ISO :14 GSO ISO : ISO :2006 ed. 1 Petroleum and natural gas industries -- Floating offshore structures -- Part 1: Monohulls, semi-submersibles and spars TC 67 SC 7 WG 5 API RP 2FPS 2nd ed.(mod) EN ISO :2006 CAN/CSA ISO :07 ISO :2006 ISO :2016 ed. 1 ISO :2003 Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 5: Weight control during engineering and construction ISO :2016 ed. 2 ISO :2012 Petroleum and natural gas industries -- Site-specific assessment of mobile offshore units -- Part 1: Jack-ups TC 67 SC 7 WG 6 ABNT NBR ISO : 2006 ST RK ISO :2006 (ISO :2003, IDT) EN ISO :2003 CAN/CSA ISO :05 TC 67 SC 7 WG 7 EN ISO :2012 CAN/CSA Z :13 ISO :2003