Core2Clean Systems. SPRAY MOP FOG S Y S T E M Technical Information
|
|
- Delilah Blake
- 5 years ago
- Views:
Transcription
1 THE SPRAY MOP FOG S Y S T E M Technical Information Copyright June 2003, U.S. and Foreign Patents Pending, September 2002, Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 1 of 12
2 Core2Clean System Introduction For years, pharmaceutical and biotechnology operations have utilized a variety of inter-related methodologies to control contamination in their controlled environments. In review of regulatory guidelines and assuring an acceptable environment to manufacture one s product, one must be able to address known contamination with a documented control and cleaning regime that has been proven effective. Within the scope of validation studies, the control system begins with confirming disinfecting agents with one s environmental isolates through either time contact kill studies (tube or surface carriers) or by AOAC Use Dilution 10 or 60 carrier testing. Deriving an environmental isolates list from environmental monitoring programs nets the ability to prove in a laboratory study the effectiveness or ineffectiveness of one s chosen chemical agents against such organisms. Once complete, we combine the knowledge from our antimicrobial effectiveness studies and our cleaning SOP s and conduct an in situ or field study. This allows us to evaluate the chemical agent together with our cleaning SOP s in a test scenario. However, once we leave the validation study scenario, we are confronted with the complex situation of implementing what we have proven as acceptable in our operations. Maintaining a system that is meaningful, manageable and defendable becomes complex in production areas as we encounter a multitude of variables. To date mops with buckets, sprayers and foggers have all been utilized in varying capacities. Introduction of these many components to the controlled environment warrants concern. With the same concern we have learned that an effective and simplistic system nets success. Addressing a simplistic and simple system requires understanding that one needs to saturate and penetrate the cell wall of an organism over a specified contact time with a chemical agent capable of destroying the cell. Thus application becomes the keystone to our success. The Core2Clean Systems were invented by to address this requirement. Sometimes one needs to spray, sometimes to mop and at times a fogger needs to be utilized. The Core2Clean Systems incorporate all three in one. The systems incorporate a trigger activated sprayer, a trigger activated sponge mop and a fogger all in one unit. The key elements of the systems are the capability to present a sufficient amount of liquid to the surface and the capability of reducing cleaning time by nearly 50%. Introduction of all the items required to clean and disinfect an area are done at once as the entire unit can be autoclaved prior to entry. With this in mind, the Core2Clean Systems provide a simple mechanism to assure cleaning and disinfection is done in an effective and efficient manner. Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 2 of 12
3 The Core2Clean Systems were designed to address the application of cleaning and disinfecting agents to the surface in a meaningful and manageable methodology. The Core2Clean Systems have been specifically designed for by pharmaceutical, biotechnology and healthcare facilities in their controlled environments. For years, the use of a conventional bucket and a mop or pad has been used to provide application of the chemical agent to the surfaces in controlled areas. In addition to mops/pad and buckets, facilities also incorporated a sprayer and a fogger within their cleaning and disinfecting operations. The Core2Clean Systems eliminate the need for a multitude of components and incorporate them within one device. Core2Clean System Features The Core2Clean Systems are made of stainless steel. The Core2Clean Systems can be steam sterilized eliminating the concern for introduction of viable contamination to the controlled environment from the components themselves. The Core2Clean Systems is compressed air operated (ASME rated to 100 psi). This provides the ability to dispense a continuous flow of a clean solution to the surface. Continuously providing a clean solution to the surface reduces cleaning time and end user effort. The Core2Clean Systems eliminate concerns of changing dirtied cleaning solution. This eliminates the need to discard dirtied solutions and reduces the volume of cleaning agents required to address surfaces annually. The Core2Clean Systems incorporate a trigger activated dispensing mop, a sprayer and a fogger all in one unit. The Core2Clean Systems present a sufficient wetting of the surface unavailable from other mopping systems. Increasing the time period the surface remains wet is essential to assuring efficacy performance of disinfecting agents. The Core2Clean Systems can reduce cleaning time by 50% and is easily moved from area to area by a 4-wheel caster dolly that can be removed and cleaned. The Core2Clean Systems utilize quick disconnects to attach the mop, sprayer and fogger. The Core2Clean Systems are user friendly and simplify cleaning and disinfecting procedures. Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 3 of 12 7
4 The Core2Clean Systems Components: Core2Clean Spray System SPRAY The Core2Clean Spray Systems are designed of 316L stainless steel and are ASME rated for up to 100 psi. Available in a 2 gallon model (C2C-102) and a 5 gallon model (C2C-105), these sprayers are powered by a compressed air line. The C2C-102 and C2C-105 can be autoclaved at 121 o C. Introduction of the chemical agent is done through a top port opening. The units include all listed below and a stainless steel dolly with stainless steel casters. This system provides easy movement throughout the production facility. Core2Clean Mop System MOP The Core2Clean Mop System connects into the top the C2C-102 (two gallon tank) or C2C-105 (five gallon tank) described above. The Core2Clean Mop System provides a 3-6 ft. extendable handle that incorporates a trigger that is depressed to dispense the liquid from the end of the foam mop end. Powered by a compressed air line the C2C-102 or C2C-105 tanks can be autoclaved at 121 o C. Introduction of the disinfecting agents are done through a top port opening. This system provides easy movement throughout the production facility. Core2Clean Fog System FOG The Core2Clean Fog System connects into the top of the C2C-102 (two gallon tank) or C2C-105 (five gallon tank) described above. The Core2Clean Fog System precipitates varying droplet sizes from 5-50 microns. Powered by a compressed air line the C2C- 102 or C2C-105 tanks can be autoclaved at 121 o C. Introduction of chemical disinfecting agents are done through a top port opening. This system provides easy movement throughout the production facility. Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 4 of 12
5 Components Quick Disconnect Feature: To simplify changing from one Core2Clean component to another, all components connect with a Swaglock R Quick Disconnect Fitting that allows each component easily snaps on and off. Quick Disconnect Sprayer Attachment Quick Disconnect Mop Frame The Core2Clean Uses the Patented VertiKlean Mophead by Contec Quick Disconnect Mop Frame 3 foot Extension Arm Quick Disconnect Fogger Attachment Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 5 of 12
6 Core2Clean 102 and 105 Quick Disconnect Features Quick Disconnect Sprayer Tip Quick Disconnect Spray Hose Quick Disconnect VertiKlean Mophead Quick Disconnect 3 ft. Extention for Spray or Mop ALSO: Quick Disconnect Hoses to Compressed Air Lines, to Sprayer and Mop and to Fogger! Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 6 of 12
7 Core2Clean Gallon System TECHNICAL SPECIFICATIONS Maximum Working Pressure: High-Pressure Regulated Tank: 100 psi Relief Valve Setting 100 psi (0.7 MPa, 7 bar) Air Inlet Size 3/8-18 npt(f) Fluid Outlet Size 3/8-18 npt (R3/8-19) compound thread Bottom Outlet Size 1/2-14 npt(f)weight 30.25lb (13.7 kg) Tank, C2C OUTLET Hose Assembly (coil) 2 Caster, swivel w/brake, hi-temp 14 Std. Pressure Wand 3 Cart Handle 15 Spray Tip (45 degree) Attachment 4 Lower Accessory Bracket 16 Mop Attachment (option) 5 Upper Accessory Bracket 17 INLET Hose Assembly (coil) 6 Keyed NC Female Quick Connect Dip tube Assembly 7 Std. NC Female Quick Connect Std Lid 8 INLET Regulator Assembly 20 0-Ring for Std Lid 9 Manual Purge Valve 21 Drain 10 INLET Pressure Gauge (2") 22 Relief Valve (100 psi) 11 OUTLET Regulator Assembly (option) degree Drain extension (option) 12 OUTLET Pressure Gauge (1") Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 7 of 12
8 Core2Clean Gallon System Dimensions (C2C gal unit) Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 8 of 12
9 Core2Clean Gallon System TECHNICAL SPECIFICATIONS Maximum Working Pressure: High-Pressure Regulated Tank: 100 psi Relief Valve Setting 100 psi (0.7 MPa, 7 bar) Air Inlet Size 3/8-18 npt(f) Fluid Outlet Size 3/8-18 npt (R3/8-19) compound thread Bottom Outlet Size 1/2-14 npt(f) Weight 30.25lb (13.7 kg) 1 Tank, C2C OUTLET Hose Assembly (coil) 2 Caster, swivel w/brake, hi-temp 14 Std. Pressure Wand 3 Cart Handle 15 Spray Tip (45 degree) Attachment 4 Lower Accessory Bracket 16 Mop Attachment (option) 5 Upper Accessory Bracket 17 INLET Hose Assembly (coil) 6 Keyed NC Female Quick Connect Dip tube Assembly 7 Std. NC Female Quick Connect Std Lid 8 INLET Regulator Assembly 20 0-Ring for Std Lid 9 Manual Purge Valve 21 Drain 10 INLET Pressure Gauge (2") 22 Relief Valve (100 psi) 11 OUTLET Regulator Assembly (option) degree Drain extension (option) 12 OUTLET Pressure Gauge (1") Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 9 of 12
10 Core2Clean Gallon System Dimensions (C2C gal unit) Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 10 of 12
11 The Core2Clean Uses the VertiKlean Mophead by Contec 100% polyester fabric. Available in 7 and 12 sizes Laser cut to completely seal edges High sorbency rate Abrasion resistance Designed for general cleaning and wipe down of walls and ceilings Ideal for use in pharmaceutical and lab clean-up The VertiKlean mophead is performance engineered by laminating Contec s Polynit wiping material (non-run polyester knit) to a clean polyester based polyurethane foam. The edges of the Polynit fabric on the mophead are sealed using a proprietary edge sealing process. The VertiKlean mophead is free of any cellulosic contaminants and is compatible with gamma, ETO, and autoclave sterilization. All lots of all sizes of the mophead conform to the following specifications: PHYSICAL PROPERTIES: Core2Clean System Mopheads Basis Weight (fabric) (g/m²) 144 to 150 Foam Type Polyester Polyurethane Basis Weight (foam) (g/m²) 405 to 415 Sorbency Extrinsic (ml/mophead) 285 Intrinsic (ml/g) 10.8 Rate in water less than 5 seconds Adhesive between layers Thermoset Polyurethane STERILE/NON-STERILE OPTIONS: The VertiKlean mophead is delivered sterile (terminally sterilized via ANSI/AAMI/ISO (Radiation Sterilization), Method 1) and individually packed. The nonsterile product can be autoclaved on site, using a recommended cycle of 30 to 60 minutes at C. VertiKlean VK-SOX Option Contec s VertiKlean Mophead is available with a Polynit VK-SOX that fits over the mophead and is used to clean floors. This adds to the strength of the mophead and is easily implemented during cleaning operations. Contec and VertiKlean are registered in the U.S. Pat. & TM off. and are the property of Contec, Inc. Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 11 of 12
12 Basic Components: Order # C2C-102 C2C-105 C2C C2C (7 inch = A) (12 inch = B) C2C Spare Parts: Order # C2C-100-4A C2C-100-4B C2C C2C C2C C2C Mopheads: Order # C2C C2C C2C C2C C2C C2C C2C C2C C2C C2C C2C C2C Core2Clean System Ordering Description 2 gallon spray tank ready for connection to the C2C Spray Gun Accessory, Mop Accessory or Fogger Accessory. Includes: caster wheels, pressure gauge, and 15 ft autoclavable source and dispense pressure hose. (Includes C2C Spray Gun) 5 gallon spray tank ready for connection to the C2C Spray Gun Accessory, Mop Accessory or Fogger Accessory. Includes: caster wheels, pressure gauge, and 15 ft autoclavable source and dispense pressure hose. (Includes C2C Spray Gun) Spray Gun Accessory with Quick Disconnect Tip (included with the C2C-102 and C2C-105) Automatic Mop Accessory with Mophead base (7 or 12 with quick disconnect) and 3 foot extension arm (additional arms available). Fogger with Quick Disconnect (5-50 micron droplet) Description Extra 15 ft. Autoclavable Source Pressure Hose Extra 15 ft. Autoclavable Output Pressure Hose Replacement Quick Disconnect (Male & Female) Replacement Gauge psi. 10 ft. Mop Handle Extension Accessory Description 7 VertiKlean Mophead for C2C System ( Non-Sterile) 48/cs 7 VertiKlean Mophead for C2C System ( STERILE) 48/cs 12 VertiKlean Mophead for C2C System ( Non-Sterile) 32/cs 12 VertiKlean Mophead for C2C System ( STERILE) 32/cs 7 VertiKlean VK-SOX Floor Cover for C2C (Non-Sterile) 32/cs 7 VertiKlean VK-SOX Floor Cover for C2C (STERILE) 32/cs 12 VertiKlean VK-SOX Floor Cover for C2C (Non-Sterile) 120/cs 12 VertiKlean VK-SOX Floor Cover for C2C (STERILE) 120/cs 10' extension wand with fittings on both ends Optional 7' Mophead Base (Mophead Only) Optional 12' Mophead Base (Mophead Only) 3' extension wand with fittings on both ends C2C Core2Clean 12' Curtain Cleaner Delivery: 6-8 weeks. For Additional Replacement Parts: Contact VAI Technical Support at Tel: (610) Fax: (610) C2C-2002-A1 06/2003 Page 12 of 12
Core2Clean Systems THE. SPRAY MOP FOG S Y S T E M Technical Information
THE SPRAY MOP FOG S Y S T E M Technical Information Plus Copyright June 2003, U.S. and Foreign Patents Pending, September 2008, Tel: (610) 644-8335 Fax: (610) 644-8336 http://www.sterile.com C2C-2002-A4
More informationCleaning & Sanitizing Materials Used in the Transport of Animals
IACUC GUIDELINE Cleaning & Sanitizing Materials Used in the Transport of Animals SOP #511 IACUC Approval Date: June 27, 2016 1. Purpose: The intent of this Animal Care and Use Procedure (SOP) is to describe
More informationIndustrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
More informationPOLARZONE FOGGERS & SPRAYERS Product description and pricing
POLARZONE FOGGERS & SPRAYERS Product description and pricing FOGGER Variable flow from ultra low volume (ULV) to light mist 2-stage motor for good reliability Adjustable flow from 0-18 oz/min Nozzle mounted
More informationABOUT SUTTNER AMERICA
ABOUT SUTTNER AMERICA Suttner, the leading manufacturer of industrial components, has been producing German engineered components for over 48 years. Suttner has a well-known reputation for quality products
More informationVari-Disk Service. Inline disc filters to meet your needs. Inlet and outlet connectors. Filter housing
Inline Disc Filters Customised inline disc filtration for a wide range of applications Free bespoke sample production Wide variety of media and connector options Low production volumes at competitive prices
More informationEquip yourself for dispensing success. Zep Professional Dispensing Solutions.
Equip yourself for dispensing success. Zep Professional Dispensing Solutions. Zep Professional Dispensing Solutions. The right product at the right dilution. In order to use any cleaning or maintenance
More informationAlpha Tech Pet, Inc. HydroMAID - "Mobile Automated Integrated Diluter" Rechargeable Battery
Alpha Tech Pet, Inc. HydroMAID - "Mobile Automated Integrated Diluter" Rechargeable Battery WEAR ALWAYS THANK YOU FOR CHOOSING OUR PRODUCTS Please use this equipment carefully and observe all warnings
More informationSpray Equipment for Every Purpose Industrial Selection Guide
Spray Finishing Equipment Selection Guide A98-142R Spray Equipment for Every Purpose Industrial Selection Guide Choosing a Spray Outfit is as easy as 1 2 3! 1 Paint Usage Per Day Getting Paint to the Spray
More informationLAMINAR FLOW HORIZONTAL FLOW BENCH (LF) OPERATION & MAINTENANCE MANUAL
LAMINAR FLOW HORIZONTAL FLOW BENCH (LF) OPERATION & MAINTENANCE MANUAL ENVIRCO Technical Support: 800-884-0002 Table of Contents WARNING... 3 INTRODUCTION... 3 FEATURES... 4 APPLICATIONS... 4 ASSEMBLY...
More informationFluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
More informationCan Making Lubrication Systems. H&O DIE SUPPLY, INC Interstate 20 Kennedale, TX 76060
H&O DIE SUPPLY, INC. sales@hodie.com 800-222-5441 Environmentally Friendly Lubrication Can Making Lubrication Systems Proven Precision & Performance www.hodie.com 7200 Interstate 20 Kennedale, TX 76060
More informationThe industry standard in lubrication equipment for outstanding performance and reliability LUBRICATION PROVEN QUALITY. LEADING TECHNOLOGY.
FIRE-BALL PUMPS The industry standard in lubrication equipment for outstanding performance and reliability LUBRICATION PROVEN QUALITY. LEADING TECHNOLOGY. The Industry s Most Trusted Piston Pump Unmatched
More informationPORTABLE UNITS PORTABLE GREASE PACKAGES FOURTH DIGIT. Hose Length. Model Model 1307
PORTABLE GREASE PACKAGES NUMBERING SYSTEM FIRST THREE DIGITS FOURTH DIGIT FIFTH DIGIT SIXTH DIGIT Pump Model Hose Length Dolly Filter Regulator Combo with Gauge 301 402 303 305 35 lb pail unit, 55:1 PM3
More informationOperator s Safety and Service Manual
Operator s Safety and Service Manual Cordless Sprayer Model: H100AC ALL CHEMICALS SMK Industries, Inc. 12839 Carpenter Trail Carlisle, IA 50047 Phone: 515-202-0052 Copyright 2014, SMK Industries Inc Email:john@smksprayers.comWeb:
More informationINFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment
INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your
More informationOperation Manual for the Drummond Hood Mate Pipet-Aid
Operation Manual for the Drummond Hood Mate Pipet-Aid Catalog Number 4-000-300 4-000-302 4-000-303 Quality and Reliability Guaranteed Made in USA by Drummond Scientific Co. 500 Parkway Broomall, PA 19008
More informationMICROTEK CLEANING SYSTEM
The ErgoWorx Touchless Microtek Cleaning System is ideal for these environments: TOUCHLESS TOUCHLESS MICROTEK CLEANING SYSTEM YOUR TOTAL MICROFIBER CLEANING SYSTEM "For use anywhere that cross-contamination
More informationRAZOR. RAZOR HVLP Spray Guns
RAZOR RAZOR HVLP Spray Guns Provides generous material flow that helps you get the job done quickly Offers exceptional atomization rate Promotes a superior finish Proven effective for clear coat, base
More informationCLEANING AND SANITIZING EQUIPMENT USED IN THE TRANSPORT OF ANIMALS
Document: ACUP532.02 Issue Date: 07 DEC 17; Effective Date 07 DEC 17 Authorization: Dr. N. Place, IACUC Chair Author: Dr. N. Young (Revision Author) CLEANING AND SANITIZING EQUIPMENT USED IN THE TRANSPORT
More informationP-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS
P-SRF V STERILE AIR PLEATED DEPTH FILTER ELEMENTS Compressed Air & Process Filtration The P-SRF V filter element is a sterile grade, pleated depth filter element in a stainless-steel body. The improved
More informationHydrosafe - Model HSFS
Hydrosafe - Model HSFS Whole House Filtration and Water Treatment Triple-Treat Protection Three-In-One Technology The innovative HydroSafe filtration system incorporates three technologies in one unit
More informationHigh-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings
High-Pressure Airless Accessories High-Pressure Equipment for Protective Coatings Genuine Graco Genuine Graco parts and accessories make the difference Get superior spray results with Graco parts Rely
More informationFixed Ratio Hydra-Cat First choice when quality counts.
11/16/98 1:38 PM Page 1-41 Fixed Ratio Hydra-Cat First choice when quality counts. Severe Duty lowers for increased wear resistance and durability PACKAGES 1-41 thru 1-46 Two- and three-lower designs provide
More informationG-FORCE CONTRACTOR. High-performance pressure washers combining reliability and performance with convenient user features.
G-FORCE High-performance pressure washers combining reliability and performance with convenient user features. CONTRACTOR PROVEN QUALITY. LEADING TECHNOLOGY. Portable Pressure Washer G-Force 2525 LD Excellent
More informationMonark 23:1; President 30:1 and 46:1
GRO FINISHING EQUIPMENT SPRY FINISHING PKGES Monark 23:1; President 3:1 and 46:1 Features and enefits irless spray technology allows ability to spray a variety of fluids from conventional coatings to high
More informationFRP SystemOne GELCOATER OPERATION MANUAL. MAGNUM VENUS PRODUCTS Operation Manual. Part No. M Revision
1300-1-1 GELCOATER OPERATION MANUAL MAGNUM VENUS PRODUCTS Operation Manual Part No. M1300-1-1 Revision 04.26.01 Operation Manual Unit Information Unit # Type Of: Power Cylinder Metering Pump Gun Fluid
More informationWash Facility Assessment
Business Name Operator's Name Assessment Date Assessor's Name Area validated, select (Site) (Bay) Describe Wash Facility Assessment Staff and Training high risk practice recommendation for risk management
More informationTechnical Information Liquiline System CAT810
TI01138C/07/EN/02.16 71341422 Products Solutions Services Technical Information Control of sample preparation by the Liquiline System CA80 or a time control system Automatic sample preparation system for
More informationMODELS 9917, , 9946P and 9989 High Pressure Lubrigun Series A
MODELS 9917, 9917-57, 9946P and 9989 Series A NOTE: Pails and Drums shown for illustration only. not included with models. MAR - 2007 Section - A5 Page - 84 DESCRIPTION Models 9917, 9917-57, 9946P, and
More informationECO Pump successfully prevents slow release of oil from Substation Secondary Containment System
Substation Secondary Containment System In January, 2013 a C.I.Agent Storm Water Solutions ECO Pump was installed at a Cleveland area substation for a major utility as part of the secondary containment
More informationHIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
More informationMulti-Sprayer OWNERS MANUAL. Ideal For: Carpet & Upholstery Pre & After Sprays. Ceiling Cleaning. Janitorial Sprays. Carpet Restoration Applications
Multi-Sprayer Ideal For: (Now also available in cordless rechargeable models) Carpet & Upholstery Pre & After Sprays Ceiling Cleaning Janitorial Sprays Carpet Restoration Applications Also Sprays: Disinfectants,
More informationHDS 5/11 U EASY! Innovative upright design. Fine-mesh water filter. Compact design. Stainless steel heating coil
1800 680 337 HDS 5/11 U EASY! The HDS 5/11 U hot water high-pressure cleaner is an affordably priced entry-level model with an innovative upright design for outstanding mobility and ergonomics. 1 Innovative
More informationTable of Contents - Vangard Filters
Vangard Filters 1 Table of Contents - Vangard Filters Materials of Construction 3 Dimensions 4 Operating Characteristics 5 Cartridge Installation Instructions 6 Autoclave Instructions 7 Inline Steam Sterilization
More informationHorizontal Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Horizontal Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationPRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
More informationCJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
More informationOperation & Service Manual
Operation & Service Manual Model: 08-4049-1012 Includes Illustrated Parts Lists Tronair, Inc. 1740 Eber Road Holland, Ohio 43528-9794 USA Telephone: (419) 866-6301 800-426-6301 Fax: (419) 867-0634 Web
More informationRacor 75500FGX Turbine Series fuel
Installation Instructions 75500FGX Fuel Filter Racor 75500FGX Turbine Series fuel filter/water separator assemblies are designed to be installed on the vacuum side of the fuel transfer pump for best efficiency
More informationProcess Industry. Diaphragm Seal Solutions
Process Industry Diaphragm Seal R Overview Diaphragm Seal Systems Provide Protection to Ensure Safety, Reliability Diaphragm seal systems protect gauges from hot, viscous, contaminated or corrosive media.
More informationVertical Pre-Piped Bladder Tanks with Proportioner
DATA SHEET Vertical Pre-Piped Bladder Tanks with Proportioner Features Pre-piped configurations with a wide selection of proportioner sizes, including the ANSUL FLOWMAX CL for closed-head sprinkler systems
More informationNOZZLETECH INC. INSTRUCTION MANUAL CEV10 01/31/ C EAST COLONIAL DRIVE ORLANDO, FL USA
NOZZLETECH INC. 3208C EAST COLONIAL DRIVE ORLANDO, FL 32803 USA INSTRUCTION MANUAL CEV10 01/31/2013 NOZZLETECH CEV10 SERIES COMPACT ELECTRIC VALVES FOR SPRAYING ROUND PATTERNS WARNING: The fluid supply
More informationDryflo Mist Collectors
Mist Collectors Nothing Compares To A Dryflo The Dryflo line of mist collectors from Donaldson Torit is one of the most effective and efficient mist filtration solutions for any sized application large
More informationIn-Duct High Pressure Nozzle Humidification System - HP HVAC Series Submittal Drawings
In-Duct High Pressure Nozzle Humidification System - HP HVAC Series Submittal Drawings Date: Job Name: Contractor: Contractor or Order No.: Engineer: Agent: Agent P.O. No.: Date Ordered: Date Required:
More informationAerial Maintenance. Drip less oil or light machine oil is used on control cables, door latches, and hinges.
Oils, greases, and other lubricants used by this Department. Engine oil SAE 15W40 is used in the crankcase of our apparatus, high-fog pump, 1981 American La France road pump transmission and also as a
More informationHDS 5/11 U. Fine-mesh water filter. Efficiently protects high-pressure pump against contamination. Easy to remove from outside.
HDS 5/11 U Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationBellows Pumps. The Newest Technology in Piston Pumps
Bellows Pumps The Newest Technology in Piston Pumps Merkur Bellows The gentle pumping action of the Merkur Bellows Pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive
More informationRegulated Hose Supply Installation, Operation & Maintenance Manual
Regulated Hose Supply Installation, Operation & Maintenance Manual For Models: BA-MS-320-00 BA-MS-320-05 BA-MS-320-20 BA-MS-325-00 BA-MS-325-05 BA-MS-325-20 BA-SFS-320-000 BA-SFS-320-012 BL-005 1/30/2007
More informationMini Fire-Ball 225, 50:1
Mini Fire-Ball 225, 5:1 Features and Benefits Non-corrosive air motor design for long life Double-acting pump ensures smooth fl uid fl ow Robust grease inlet cage withstands the most abusive handling Typical
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GH200 Sprayer Models Sprayer Models GH30 GH200 GH230 GH300 20 Vac 60 Hz ETL/CSA/UL 20 Vac 60 Hz 253957 253959 253980 253962 253963 25398 255095 253965 253966 253982
More informationPortable Fuel Dispensing Equipment
Portable Fuel Dispensing Equipment (Model 107 Fuel Conditioning Cart) (Model 106 Fuel Service Cart) Webber EMI offers a full line of fuel dispensing & handling equipment, from fuel conditioning drum carts,
More informationIndustrial Pumping Equipment Air-Operated Diaphragm Pumps
Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and
More informationHDS 5/11 U. Innovative upright design. Fine-mesh water filter. Compact design. Stainless steel heating coil
HDS 5/11 U Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationHARMSCO Hurricane Swing Bolt Water Filters Models: HUR 1X170FL, HUR 3X170FL HUR 5X170FL, & HUR 8X170FL
Models: HUR 1X170FL, HUR 3X170FL HUR 5X170FL, & HUR 8X170FL INSTALLATION AND OPERATION MANUAL HUR 8X170FL HUR 5X170FL HUR 3X170FL HUR 1X170FL Harmsco Filtration Products With Patented Up-Flow and Tangential/Rotational
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationPortable Equipment High-Pressure Heavy-Duty Grease Pumps
High-Pressure Heavy-Duty Grease Pumps 917 346P 987 Series 20 50:1 Air-Operated Double Acting The following models contain Lincoln s high pressure Series 20 grease pumps. Model 917 120 lb. Drum Will dispense
More informationLabsit Simply clever
Labsit Simply clever Labsit impresses with its intelligence and simplicity. It has been proven to have all of the features required for a laboratory workstation and at the same time is lightweight, can
More informationUser Guide. Pall Laboratory Manifold. For laboratory use. Not for use in a manner other than indicated. Introduction. Regulatory References
www.pall.com/lab User Guide Pall Laboratory Manifold For laboratory use. Not for use in a manner other than indicated. Introduction Application and Intended Use The membrane filtration (MF) technique is
More informationAll-in-One... Wet or Dry
TM All-in-One... Wet or Dry Moisture Injection Schmidt Technology The Most Versatile Blasting System for Surface Preparation Professionals What is an AmphiBlast multi-purpose blasting system? Schmidt announces
More informationPosiTest. Pull-Off Adhesion Tester. INSTRUCTION MANUAL v PosiTest AT-M (manual) PosiTest AT-A (automatic)
PosiTest Pull-Off Adhesion Tester INSTRUCTION MANUAL v. 4.0 PosiTest AT-M (manual) PosiTest AT-A (automatic) Introduction The portable, hand-operated PosiTest Pull-Off Adhesion Tester measures the force
More informationPACKAGED DOWNFLO EVOLUTION DUST COLLECTORS. The Complete Plug-and-Play Solution
PACKAGED DOWNFLO EVOLUTION DUST COLLECTORS The Complete Plug-and-Play Solution WE KNOW FILTRATION Donaldson is a global provider of filtration solutions for manufacturing industries. Our advanced technology,
More informationBenron Equipment & supply, Inc.
Benron Equipment & supply, Inc. Service Manual G5 Part Number 6-00A. and 6-00M Edition 0/008 Ez-Tex G5 Operational Instructions. Before attempting to use the G5 check material manufacturer for mixing and
More informationOperation Manual for the Drummond Pipet-Aid XP
Operation Manual for the Drummond Pipet-Aid XP Catalog Number 4-000-101 4-000-201 4-000-201-E Quality and Reliability Guaranteed Made in USA by Drummond Scientific Co. 500 Parkway Broomall, PA 19008 800/523-7480
More informationSingleTech. SingleTech Solus Specifications. SingleTech Engineering
Solus Specifications Body and Wheel Centers Material chosen for light-weight, high load capacity, resistance to abuse, electrical safety and finish characteristics. Body consists of two pressure-diecast
More informationCash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
More informationAIRCLEAN 32 USER MANUAL. High-pressure cleaner. Wilhelmsen Ships Service. Produced in Norway for:
AIRCLEAN 32 High-pressure cleaner USER MANUAL Produced in Norway for: Wilhelmsen Ships Service Contents E.1 IMPORTANT INFORMATION 3 E.1.1 Safety 3 E.1.2 Lubrication 3 E.1.3 Air operating pressure 3 E.1.4
More informationOperation Manual for the Drummond Pipet-Aid XL
Operation Manual for the Drummond Pipet-Aid XL Catalog Number 4-000-105 4-000-205 4-000-205-A 4-000-205-E NEW Smoother, Quieter Pump Made in USA by LISTED (LABORATORY EQUIPMENT) 34 HB Drummond Scientific
More informationPortable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System
Portable Liquid Pump and Filter Systems Compressed Air-Powered Pump and Filter System Technical Bulletin C PORTABLE LIQUID PUMP AND FILTER SYSTEMS DESCRIPTION Filtration Systems Portable Liquid Pump &
More informationDEMA MODELS 606T INSTALLATION INSTRUCTIONS
I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit TABLE 1 Hose I.D. 3/8" 1/2" 5/8" Max. Length 15 ft.
More informationFueling Global Aviation since 1972 RELIABILITY SUPPORT DELIVERY TM
Fueling Global Aviation since 1972 RELIABILITY SUPPORT DELIVERY TM HYDRANT DISPENSERS HYDRANT CARTS AVIATION REFUELERS REFUELING MODULES BETA Fueling Systems Fueling global aviation since 1972 For more
More informationMicfiil Automatic Lubricator
Micfiil Automatic Lubricator This electromechanical automatic grease lubricator is primarily designed to compensate the performance of conventional gas type automatic grease lubricator. It also offers
More informationDelivering unsurpassed quality, design and value.
Delivering unsurpassed quality, design and value. Exergy has been a leading global supplier of heat transfer solutions for over twenty-five years. We utilize state-of-the-art design and manufacturing techniques
More informationHIGH PRESSURE SPRAY GUNS &ACCESSORIES
HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000
More informationDarley UHP-HV Diesel Specification 1
Darley UHP-HV Diesel Specification 1 This dual pump is designed for either a powerhead type unit or a full module. The module provides a self-contained diesel powered slide-in type ultra high pressure
More informationNOZZLETECH INC. INSTRUCTION MANUAL CEV00 01/31/ C EAST COLONIAL DRIVE ORLANDO, FL USA
NOZZLETECH INC. 3208C EAST COLONIAL DRIVE ORLANDO, FL 32803 USA INSTRUCTION MANUAL CEV00 01/31/2013 NOZZLETECH CEV00 SERIES COMPACT ELECTRIC VALVES FOR EXTRUSION RELATED PATTERNS WARNING: The fluid supply
More informationGAMA SPRAY EQUIPMENT
GAMA SPRAY EQUIPMENT WHO WE ARE Located in Sitges, Barcelona (Spain), GAMA focuses its main activity on the design, manufacturing and sales of two component spray and pouring equipment for the application
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 74-06 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry,
More informationICS Integrated Cleaning System. Rechargeable Battery
ICS 8900 Integrated Cleaning System Rechargeable Battery THANK YOU FOR CHOOSING OUR PRODUCTS Hydro Systems manufactures quality chemical proportioners. Please use this equipment carefully and observe all
More information75500MAX Series and 75500MAXM Series
75500MAX Series and 75500MAXM Series Marine Fuel Filter/Water Separators Instruction Part Number 15349 Rev E Racor Turbine Series fuel filter/ water separators protect the precision components of your
More informationCompact Cleaning System
Series 9900 Compact Cleaning System THANK YOU FOR CHOOSING OUR PRODUCTS Please use this equipment carefully and observe all warnings and cautions. WEAR ALWAYS protective clothing and eyewear when working
More informationWASHDOWN & PRESSURE WASH
WASHDOWN & PRESSURE WASH SEWER CLEANER & JETTING HOSE FITTINGS Part No. Thread Size Hose Size Weight Ea. PRICE EACH 9800SC HOSE MENDERS 9800SC-12-12 3 4" 0.50 $ 101.10 9800SC-1-1 1" 0.80 38.20 980SC FEMALE
More informationHDS 5/15 UX. Integrated hose reel. Water fine filter. Innovative upright design. Compact design
HDS 5/15 UX Competitively priced entry class model of a hot water high-pressure cleaner. Innovative "Upright"-Design ensures good mobility and ergonomics. Very user-friendly due to one-button-operation
More informationItems # and #
D I S P E N S E R T E C H N I C A L M A N U A L Items #91160-00 and #91161-00 1. System Description... 1 2. Equipment Included with the Green Earth II XL System... 2 3. Components Included with Green Earth
More informationOperating and Maintenance Instructions
1500 Tube Leak Test Gun - Vacuum Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com Table Of Contents Introduction...
More informationParts. Parts / Spares Reference Sheet. Graco Triton Packages. For more information: /
/ Spares Reference Sheet Pail Mount Packages (see model descriptions on page 3) Models 33466, 33467, 33468, 3346, 330, 33, 34, 34, 3374, 3374, 864, 8643, 8644, 8645, 8646, 86, and 8648. Items 56 5 are
More informationMaterial Handling Products for Industrial and Process Applications
Material Handling Products for Industrial and Process Applications The material matters in material handling The material matters in material handling Contents Nest and Stack Containers...4-5 Stacking
More informationTS1251 PRESSURE DISPENSER USER'S MANUAL
TS1251 PRESSURE DISPENSER USER'S MANUAL TABLE OF CONTENTS SECTION DESCRIPTION PAGE NUMBER 1.0 CAUTIONS AND WARNINGS... 3 2.0 INTRODUCTION... 4 3.0 DESCRIPTION... 4 & 5 4.0 SET UP AND INSTALLATION... 6
More informationINSTALLATION INSTRUCTIONS, PARTS LIST AND CONFIGURATION GUIDE FOR THE CARBONATOR. Large Model No
Please refer to the Schroeder America website (www.schroederamerica.com) for information relating to Schroeder America installation and Service Manuals, Instruction Sheets, Technical Bulletins, Service
More informationLubrication equipment
Made In Italy Lubrication equipment PRODUCTS CATALOGUE GREASE DISTRIBUTION page 2 OIL DISTRIBUTION page 38 EXHAUSTED OIL ASPIRATORS page 112 TROLLEYS FOR DRUMS TRANSPORT page 118 OIL DRAIN UNITS page 134
More informationHDS 5/12 C. Economical. Storage. Ease of use. Mobility
HDS 5/12 C Contemporary eco!efficiency mode, easy 1-button operation, integrated tanks, built-in hose/ cable storage, accessory compartment, large wheels and steering roller. 1 2 3 4 1 2 Economical eco!efficiency
More informationCASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
More informationINVITATION TO BID. Major Category: CL Cleaning Supplies Vendor: Ref ID: Quantity Requested Price Per BOT Total Price
00 1. A00030 LAUNDRY DETERGENT Industrial size, powder High Efficiency Quantity Requested Price Per BOX Total Price 10(BOX) BOX 2. G00400 HYDRA WIPES Microfiber Cloth, 16" x 16" 360() 3. 000415 RAGS White
More informationUltraviolet Sterilization System Installation Instructions & Owner s Manual
Your best choice in Ultraviolet Sterilization RoHS COMPLIANT Ultraviolet Sterilization System Installation Instructions & Owner s Manual For models: UV-1, UV-2, UV-6, UV-8C, UV-12C, UV-24B UV-100B Table
More informationXTREME Dependable, high-performance airless spray packages for the toughest protective coatings applications.
XTREME Dependable, high-performance airless spray packages for the toughest protective coatings applications. PROTECTIVE COATINGS PROVEN QUALITY. LEADING TECHNOLOGY. Proven Design and Performance. AIRLESS
More informationFor a quote, call us ADVANTAGES OF SERIESLOCK INCLUDE:
SLDATA-0319 Patents Pending SeriesLock, a new innovative fluid coupler, allows a larger volume of fluid to pass through it at lower line pressures. ADVANTAGES OF SERIESLOCK INCLUDE: Spring-Free Flow Path
More informationintroduction RV Series Sediment Strainers Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D4101-86 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F1498 ASTM F437 IPEX RV Sediment Strainers protect critical pipeline components by
More informationModel MTB-ASME Vertical Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
More informationPaint/Solvent/Dump Valve and Flow-Through Valve
Instruction Sheet P/N 08573D Paint/Solvent/Dump Valve and Flow-Through Valve. Description See Figure. The paint/solvent/dump valve is a normally-closed valve that opens to trigger and/or dump coating material.
More informationAvailable with T93R MAXX Tip & Guard
7500 PSI (500 BAR) Maximum Pressure Airless Gun High-strength aluminum alloy handle is light-weight, solid and strong single piece forging that features an anodized protective finish that is highly corrosive
More information