DF15901 DSDF DF15902 DSDF ADVANCE Control Unit SET デフィ スポーツディスプレイエフアドバンスコントロールユニットセット

Transcription

1 デフィースポーツディスプレイエフ取扱説明書 DF15901 DSDF DF15902 DSDF ADVANCE Control Unit SET デフィ スポーツディスプレイエフアドバンスコントロールユニットセット 日本国内でご購入の場合は P. 8 から P. 85 をお読みください このたびは 当社製品をお買い上げいただきまして 誠にありがとうございます お客様 取り付け業者様ともに ご使用の前に本書を全て必ずお読みいただき 取り付け後も常にお手元に保管し 正しいお取り扱い方法でご愛用いただけますようお願い申し上げます なお 本品の装着に関する事故や弊害につきましては いかなる場合においても 当社は一切責任を負いかねますので あらかじめご了承いただけますようお願い申し上げます 英語の部分は国内では無効です Web サイト 電話番号 (03) 受付時間 10:00 ~ 12:00 13:00 ~ 17:00 ( 土 日 祝日 当社休日を除く平日 ) English section is from P. 86 to P Thank you very much for purchasing our product. Before installing and using the product, please read this manual thoroughly. All sections are for customers and installation personnels. After installation, please keep this manual for future reference. Defi will not be held responsible for accidents or damages related to installation of this product. Japanese section is effective only in Japan. Web site 本書では Defi Sports Display F を省略して DSDF と表記しています DSDF is an abbreviation for Defi Sports Display F.

2 1. English contents 1. English contents 4 2. Safety Warning Please read carefully Before handling About installation and operation Features Lineup System structure Component Components included in DF15901/DF Components included in DF Part names and dimensions DSDF main unit (unit:mm(inches)) Switch unit for DSDF (unit:mm(inches)) Specifications Display items/range Installation Overall procedure Installation of DSDF main unit Installation of switch unit for DSDF Operation check and settings Operation Mode transition Method of operation Display Opening mode/ending mode Meter mode Street mode Circuit mode Gauge mode Multi Information Display (MID) Sequential indicator Side indicator 119

3 12.6. State indicator Functions About USB flash drive What you can do by connecting a USB flash drive Operation-confirmed USB flash drives Meter changeover Peak display Peak reset Time measure display Play display Warning display Warm-up display Menu mode Time measure start Time measure settings Time measure conditions Course select New course create Data management Log data play Best time of time measure Best lap time System settings Dimmer Auto time measure Language OBD warning Warning limit for oil press Warning buzzer TURBO/IN-MF. P. scale Tacho scale Inside bar Gear position range Speed settings for gear position OBD speed offset Sequential indicator pattern Sequential indicator step

4 Device for indicator/bar/measure Warm-up Throttle calibration Side indicator Speed unit Press unit Temp unit Time difference Display No Touch panel mode Setting value reset System update Trip reset Display OFF ADVANCE setup mode ADVANCE warning setup ADVANCE System setup Speed pulse setting [SPEED PULSES] Number of cylinders setting [ENGINE CYLINDERS] Tachometer response setting [TACHO RESPONSE] Dimmer setting [DIMMER] Troubleshooting Repair parts Optional parts Warranty/maintenance/servicing Paper template DSDF Main unit Switch unit for DSDF

5 2. Safety Warning Please read carefully. This product is an additional product for providing information to automobile users about engine conditions and other important factors. When installing and operating this product, be sure to read the cautionary items of this operation manual as well as those given in the operation manual for the vehicle in which this product will be installed. Please obtain a full understanding of the cautionary items and use the product accordingly. In the event that this product (or the vehicle in which it is installed) is lent to or transferred to another person, please be sure this operation manual and the warranty card accompany the product. In this manual, the degree of hazard arising from actions such as improper operation is separated into the 3 levels "Danger," "Warning," and "Caution." In addition, instructions that must be followed for safe and proper use of this product as well as practices that must be maintained are marked with a "Confirmation" heading. Please read and become familiar with these sections. Danger Warning Caution Confirmation Indicates a hazard that could cause death or serious personal injury if the product is mishandled. Indicates a possibility of death or serious personal injury if the product is mishandled. Indicates a conceivable source of personal injury or damage to equipment if the product is improperly operated. Indicates an instruction that must be performed or practice that must be maintained. Properties for safety warning indicates attention needs to be paid. (Including warnings) Prohibited indicates restricted actions. (PROHIBITED actions) Must indicates actions that need to be carried out. (MUST actions) 2.1. Before handling <for installation personnel> -86- Danger Do not install the product in wet places. It may result in a fire caused by an electrical short circuit.

6 Keep the wiring away from locations which affect steering, safety and brake systems. Interfering with normal operation of the vehicle can result in an accident or fire. Ensure that the vehicle will remain stationary and turn the power off before installing this product. Failure to do so could result in a fire, and could make the vehicle move during installation. Remove the key from the ignition and disconnect the negative (-) battery terminal prior to installation of this product. Failure to do so could result in a fire caused by an electrical short circuit. Take care not to install this product in a way that interferes with safety equipment such as seat belts and air bag systems or vehicle operation equipment such as engine controls, steering wheel and brake systems. Interference with normal operation of the vehicle can result in an accident or fire. Solder or use a solderless connector for wiring connections and make sure connections are insulated. In areas where there could be tension or sudden impacts on the wiring, safeguard the wiring with corrugated tubing or other shock absorbent material. Accidental shorts can cause fires. While wiring power supply wire, to avoid the risk of electrical shock or fire, be sure to confirm that there is no disconnection or breakage of wire. Poor connection can result in short-circuit, electrical shock, fire, or other hazards. The ignition-switched +12V(IGN) line must be connected to the vehicle's ignition-switched wire with a fuse of 30A or less. High-capacity fuse(more than 30A) will not blowout even with an abnormal current flow and may cause fire. Discontinue use of this product if a blowout of the fuse has occurred. Continued use while the condition exists could result in an accident, fire, or damage to the vehicle. Use the tube fuse of regulated capacity when the fuse of the power source wire is changed. Using a fuse that exceeds regulated capacity may cause fire. Discontinue use of this product if the product doesn't operate or operates improperly. Continued use while the condition exists could result in an accident or damage. Warning Do not disassemble or modify this product. Such actions can not only damage or destroy the product but also will void the warranty. Disassemble/modify Do not perform installation of this product immediately after the engine has been switched off. The engine and exhaust system are extremely hot -87-

7 at this time and can cause burns if touched. Please keep children and infants away from the installation area. Children may swallow small parts or be injured in other ways. Do not install this product in the area where safety equipment such as air bags are mounted. This may cause more injuries in the event of accident. Do not install this product in vehicles which are not compatible with the specification of this product. Carefully consider the installation location and driver's operation of the product before installation. Do not install the product where it interrupts driving and the safety deices of vehicle such as air bags. Be sure not to install the unit where it could fall. Improper installation or operation could cause the product to fall and damage the vehicle or cause serious danger by impeding driving. Ensure that the wiring of this product does not have an adverse impact on the other wiring of the vehicle. Incorrect wiring may destroy your ECU, ignition system and other engine management devices. When tapping engine rev or speed signal from the ECU, please make sure to follow the procedure as below: 1. Make sure that you have connected the power supply wire of the advance control unit. 2. Confirm that the DC Source LED of the advance control unit is lighted with ignition on. 3. Remove negative terminal connector from battery and tap engine rev or speed signal from ECU. Caution Do not drop any of the components of this product. It may result in damage to the product. Do not apply excessive force on switches/terminals. It may result in damage to the product. Do not use wires other than the provided wires. Do not place wires near the engine, exhaust pipe or turbine. It may result in damage or fusion of wires. Do not expose this product to moisture, dust or direct sunlight, or place product directly in front of heat vents. Do not pull the wires out of connectors forcefully. The connectors may be broken and the wires may be cut. When pulling out the wires, press the lock firmly and unclip the locks of connectors. -88-

8 Do not install this product or gauges into the passenger side or center of the dashboard. It doesn't meet vehicle safety standards. Do not attach wires on the body of the vehicle or engine parts as this may result in damage to the product. This product is designed for use on 12V vehicles. Do not install this product on vehicles with 24V systems. Insulate any unused wires. If any wires or connectors loosen during installation, please make sure they are correctly reattached. Install wires away from ignition and also radio signal frequency interference as this could cause the gauges to malfunction. Please set it up so that the equipment, such as the wireless machines and cellular phones that emit electric waves, does not touch this product. It may result in incorrect operation. Make sure the waterproof processing is done when diverging wires in the engine compartment. When installing the sensor, do not bend the wire near the sensor body. Wear gloves to avoid burns when soldering and cuts when installing wires, sharp edges of parts. Install sensors away from hot or wet places. When using sunshade, put sunshade between products and windshield to avoid direct sun exposure. Turn the power off and use a dried soft cloth for cleanup. Do not use cleaners except neutral detergent. It may damage the product. Confirmation Be sure to follow all instructions in this manual to ensure safe installation and operation of the product. When the negative (-) battery terminal is disconnected, equipment such as clocks and audio components having internal memory may lose their memory data. Follow the operation manual of each component to reset data after installation of this product. After installation is complete, return this operation manual, warranty card, and the package along with the warranty to the customer. Please confirm with the maintenance book that the car manufacturer issued when installing and detaching genuine parts. Before tapping wires, check the voltage of the existing wire. After tapping the wire, check the voltage of the tapped wire again to confirm whether -89-

9 you have tapped into the proper place. If car navigation system or car television is installed in vehicle, gauges and wires of this product need to be kept as far away as possible from the wiring and installing positions of car navigation system or car television. Failure to do so may result in interference of television display(vhf). Once this product is fixed, connectors and a USB flash drive may not be mounted/detached easily because all the connectors are located on the backside. Fix this product in consideration of the locations of connectors. On no event will Nippon Seiki Co., Ltd. be liable to you for any damages or losses of genuine parts for your vehicle while installing. In the case that your OBDII has a cover, it may not be completely closed by attaching this product to the OBDII connector About installation and operation <for customer and installation personnel> Warning Do not disassemble or modify this product. Such actions will not only void the warranty but also damage or destroy the product Disassemble/modify Do not operate while driving. Discontinue use of this product if it doesn't operate, water gets into the unit, or smoke or a strange odor comes from the unit. If such a condition occurs, contact the store or installation personnel as soon as possible. Continued use while the condition exists could result in an accident or fire. Do not use the TIME MEASURE function in open roads. It is only for circuits. Please have this product installed by store professional or dealer where it was purchased. Installation by the customer will void the warranty. In the case any of the warning lamps of vehicle (check engine lamp, etc.) is lighted, stop the vehicle and turn off the engine immediately. After turning off the engine, detach this product from the OBDII connector. Continued use while in a faulty state could result in accidents or malfunction. In order to ensure safe driving, check the information on the gauge only for a short period of time. Looking at the display for a long period of time could distract attention from the road and result in an accident. Fix the switch unit and other parts tightly to the vehicle to avoid that children swallow those.

10 Caution Do not pull the wires out of connectors forcefully. The connectors may be broken and the wires may be cut. When pulling out the wires, press the lock firmly and unclip the locks of connectors. On no event will Nippon Seiki Co., Ltd. be liable to you for any damages arising out of the use or inability to use the product, even if Nippon Seiki Co., Ltd. has been advised of the possibility of such damage. Confirmation This product can be linked to the ADVANCE System NOT to the previous version of Defi-Link System. The information displayed on this product are for reference purposes only. Please drive according to the indication of vehicle's originally equipped instruments. This product can be used only on 1, 2, 3, 4, 5, 6, and 8 cylinder vehicles with 4 cycle engine. This product cannot be used on diesel vehicles. Only in case in which vehicles are compatible with the OBD specifications of this product, it can be used on diesel vehicles. Please check the installed product regularly. Durability might deteriorate according to use conditions, etc. Detach this product from the vehicle when not in use for a long time. Dispose of the product according to the local recycling regulations. Turn the power off before wiping out the touch panel to prevent malfunction. This product uses high luminance LEDs. When several gauges are lined up, there might be color difference in the LED production tolerance, but it is not malfunction. In the case of idling stop vehicles, the power of the product is turned off and restarted in some cases by a drop in battery voltage when the engine is restarted while idling stop function is active. It is not malfunction. The software of this product will be upgraded for product improvement without notice. The contents of this manual and the product may be slightly different. The TFT color LCD will be dimmed to prevent damage from heat automatically when heated. It is not malfunction. As the temperature is decreased, the brightness will be increased. -91-

11 Regarding a USB flash drive Do not turn off the battery while writing data into a USB flash drive. Otherwise, it will be damaged. Do not pull out/insert a USB flash drive while the ignition is on. Otherwise, the data will be damaged or the drive will not be recognized. Read the instructions of a USB flash drive carefully and use it properly. Before using a USB flash drive, format it in FAT32. A USB flash drive doesn't work properly if it is formatted in other formats. Purchase a commercially available USB flash drive. Some kinds of USB flash drives may not be compatible. Select a USB flash drive in consideration of the installation space. Once this product is fixed, connectors and a USB flash drive may not be mounted/ detached easily. Use an USB extension cable such as an angled 90 degree cable with male to female adapter if necessary. Give attention to the direction of the USB connector. The processing time will slow down due to the increase of the size and number of files. 200MB and over is necessary in a USB flash drive. Around 40MB is necessary to record the driving log data of 9 hours 59 minutes 59 seconds. See section "13.1. About USB flash drive" on page

12 3. Features <for customer> 4.2 inches touch panel TFT color LCD enhances the operatability and the readability. The low-reflection glass cuts down the reflection to the panel surface. Accurate location information can be obtained and time can be measured by high performance 10Hz GNSS antenna. By using a USB flash drive, driving data can be recorded for a long time (a maximum of 9 hours 59 minutes 59 seconds per file). Purchase a commercially available USB flash drive. Automatic Dimming control system is equipped. The display pattern can be selected from 3 patterns. The sensing data can be sent to DSDF from ADVANCE System. ISO CAN signals from the OBD connector of your vehicle can be showed. Sequential indicator consists of 10 red LEDs for the tachometer warning. Side indicator lights up at different colors along with each mode and condition. A separate switch unit which is easy to push by fingers with racing gloves is included in the package. The latest software program is possible to be downloaded from the Defi website. Peak display, warning display, and warm-up functions are equipped. Mounting brackets are included and the paper templates are attached. The driving log data can be recorded in a USB flash drive and analyzed by a dedicated PC software. -93-

13 4. Lineup <for customer> Part no. Product name Summary of contents DF15901 DF15902 DSDF (single item) DSDF, OBD wire, switch, and GNSS antenna DSDF ADVANCE Control Unit Set DF15901, ADVANCE Control Unit, and sensors 5. System structure <for customer and installation personnel> USB flash driver (commercially available) Adapter wire OBDII wire OBDII DF15901 DSDF main unit Power source wire Switch for DSDF GNSS antenna ADVANCE System Switch Meter wire ADVANCE Control Unit Meter wire ADVANCE gauges DF15902 Sensors Confirmation Power source wire ADVANCE gauges are not included in this product. Connect DSDF to ADVANCE System by using a meter wire. Purchase a commercially available USB flash drive. See section "13.1. About USB flash drive" on page

14 6. Component <for customer and installation personnel> 6.1. Components included in DF15901/DF m (5ft) 1m (3 1/3ft) DSDF main unit 1pc 20cm (8in) Switch unit for DSDF 1pc 80cm (2 3/5ft) Power source wire 1pc 3m (10ft) OBDII wire 1pc Adapter wire 1pc GNSS antenna 1pc Plastic band 5pcs Mounting bracket 2pcs M4 bolt washer nut spring washer 4pcs each 4 12 tapping screw 2pcs Mounting bracket 1pc for switch mounting Solderless connector 4pcs Clip 1pc Double sided tape 1pc Confirmation Operation manual (this booklet) and a warranty card are included with the parts listed above. Keep them at hand. -95-

15 6.2. Components included in DF15902 ADVANCE Control unit package 1.5m (5ft) 1m (3 1/3ft) ADVANCE Control unit 1pc Switch 1pc Power source wire 1pc 2m (6 3/5ft) Meter wire 1pc Double sided tape 1pc Plastic band 2pcs Solderless connector 4pcs Clip 1pc M4 hexagonal nut 4pcs M4 screw 4pcs Confirmation Refer to the manual for ADVANCE Control unit for details. -96-

16 SP TA Sensor package Turbo/boost sensor 1pc 50cm (1 3/5ft) Pressure sensor 1pc Temperature sensor 2pcs 2.5m (8 1/5ft) Light blue Rubber hose 1pc Three way joing 1pc Turbo sensor wire 1pc 3m (10ft) 3m (10ft) 3m (10ft) Black Red Pink Pressure sensor wire 1pc Oil temp sensor wire 1pc Water temp sensor wire 1pc 2m (6 3/5ft) Blue Speed/tachometer signai wire 1pc Plastic band 20pcs Solderless connector 1pc Confirmation Refer to the manual for sensor installation for details. The turbo sensor is for 200kPa (29PSI) or less. In case your boost pressure exceeds 200kPa, purchase the turbo sensor for 300kPa (PDF14604S), a commercially available rubber hose of diameter 4mm and a three way joint. -97-

17 7. Part names and dimensions <for customer and installation personnel> 7.1. DSDF main unit (unit:mm(inches)) 前面 A B F G H 183.3(7.2) 90.8(3.6) 42.3(1.7) 16.3(0.6) 23.7(0.9) 105(4.1) 50.6(2) C D E I J K The areas surrounded by dotted lines are touch panel. DSDF has 12 square areas and 4 round areas. Touch central points of each area to operate. A: DIM sensor B: GNSS indicator C: OBD indicator D: ADVANCE indicator E: LCD panel (touch panel) F: Sequential indicator (red 10 LEDs) G: UP button (touch panel) H: DOWN button (touch panel) I: MENU button (touch panel) J: RETURN button (touch panel) K: Side indicator LEDs (2 places) -98-

18 背面 L M N 174(6.9) 60(2.4) 5(0.2) 18.5(0.7) 55.5(2.2) GNSS SW CAN USB OBD DC SOURCE METER O P Q R L: Threaded holes for mounting brackets (4 places) M:Connector for switch unit for DSDF (white) [SW] N: Extended connector (black) unused [CAN] O: Connector for power source wire (beige) [DC SOURCE] P: Connector for meter wire (white) [METER] Q: Port for USB flash drive [USB] R: Connector for GNSS antenna [GNSS] S: Connector for OBDII wire [OBD] The letters shown in [ ] are engraved on the case. Caution Do not remove the convex connector (white) of the extended connector (black). This product doesn't operate if a wrong wire is connected. Confirmation Select a USB flash drive in consideration of the installation space. Once this product is fixed, connectors and a USB flash drive may not be mounted/detached easily. Use an USB extension cable such as an angled 90 degree cable with male to female adapter if necessary. Give attention to the direction of the USB connector. S -99-

19 7.2. Switch unit for DSDF (unit:mm(inches)) A B C D E Mounting bracket for switch mounting 74.3(2.9) Horizontal line F G 51.6(2) 27.1(1.1) Holes for screws A:LEFT switch B:UP switch C:ENTER/MENU switch D:DOWN switch E: RIGHT switch F: RETURN/RESET switch G:PEAK/SELECT switch 8. Specifications <for customer and installation personnel> Storage temperature range -30 ~ +80, -22 F~ +176 F Operation temperature range -20 ~ +60, -4 F~ +140 F Power supply voltage DC 10~16V Current consumption 1A (DSDF only), dark current 0.2mA Applicable speed pulse (When ADVANCE System is connected) Applicable number of cylinders (When ADVANCE System is connected) pulse free pulse free setting: 1,274 16,562pulse/km (equiv pulse)

20 9. Display items/range <for customer> Item A D V A N C E Signal input O B D G P S SI unit Lower limit ~ Upper limit unit USDM unit (for USA) Lower limit ~ Upper limit unit SPEED 0 ~ 400 km/h 0 ~ 240 MPH TACHO - 0 ~ RPM 0 ~ RPM TURBO ~ 3.00 x100kpa ~ 45.0 inhg-psi IN-MF. P ~ 3.00 x100kpa ~ 45.0 inhg-psi OIL P ~ 10.0 x100kpa 0 ~ 145 PSI FUEL P ~ 6.0 x100kpa 0 ~ 90 PSI DIFF. P ~ 10.0 x100kpa 0 ~ 145 PSI OIL T ~ ~ 302 WATER T. - 0 ~ ~ 302 E.G.T ~ ~ 2012 VOLT ~ 17.0 V 10.0 ~ 17.0 V THROTTLE ~ 100 % 0 ~ 100 % IN-AIR T ~ ~ 212 GEAR - 0~9-0~9 - ODO ~ km 0 ~ mile TRIP ~ km 0 ~ mile NOW TIME ~ 9: ~ 9: BEST TIME ~ 9: ~ 9: LAST1 TIME ~ 9: ~ 9: LAST2 TIME ~ 9: ~ 9: LAST3 TIME ~ 9: ~ 9: All the items can be displayed in digital. Tacho, turbo, and throttle can be displayed as a bar gauge. If the signals obtained are more than the upper limits, the upper limit values are displayed. If the signals obtained are less than the lower limits, the lower limit values are displayed

21 GNSS (Global Navigation Satellite System) is a satellite navigation system with global coverage including GPS, GLONASS, Gallileo, and so on. The term "GPS" is adopted on the display instead of GNSS. To display the ADVANCE items, ADVANCE Control Unit and sensors are necessary. ADVANCE Control Unit and sensors are not included in the package of DF turbo sensor, 1 pressure sensor, 2 temperature sensors, and ADVANCE Control Unit is included in the package of DF To display fuel pressure and exhaust temperature, each sensor and sensor wire is necessary additionally. If you have already installed the ADVANCE System, it can be connected to DSDF. OBD is available on vehicles whose communication specification are compliant with ISO-CAN. Ask our official distributor or your local dealer about the compatibility

22 10. Installation <for installation personnel> Warning Please have this product installed by store professional or dealer where it was purchased. Installation by the customer could result in accidents or malfunction Overall procedure Install ADVANCE Control Unit and sensors before installing DSDF If you Install ADVANCE System and DSDF at the same time. Procedure (1) Confirm the components See section "6. Component" on page 95. Confirmation Dispose of the product packaging materials according to the local recycling regulations. (2) Position DSDF and the switch unit for DSDF. Paper templates are available. See section "20. Paper template" on page 172. Confirmation Once this product is fixed, connectors and a USB flash drive may not be mounted/detached easily because all the connectors are located on the backside. Fix this product in consideration of the locations of connectors. (3) Disconnect the negative (-) battery terminal. (4) Connect the power source wire to vehicle. The power source wires for DSDF and ADVANCE Control Unit are the same parts. If you install only DSDF, use 1 wire. If you install ADVANCE Control Unit with DSDF, use 2 wires

23 Power source wire Fuse(4A) Red: +B (Battery: to 12V battery wire) Orange: IGN (Ignition: to 12V wire while ignition is on) Black: GND (Earth: to ground, negative battery terminal) White: +ILM (Illumination: ) Regarding the white illumination wire For ADVANCE Control Unit: to 12V wire while instrument panel lights are on For DSDF: Unused (Insulate it.) Caution DSDF has a dimming function and does not need the white wire for illumination to be wired. Be sure to Insulate it. Confirmation Do not wire the orange wire for ignition to the accessory power source. It may result in malfunction. (5) If you install ADVANCE System in parallel Attach sensors to vehicle referring to the manuals. And then connect the power source wire for ADVANCE Control Unit, the switch, and sensor wires to ADVANCE Control Unit. (6) If you install ADVANCE System in parallel Wire the speed/tachometer signal wire to vehicle then to ADVANCE Control Unit. If you will use the speed/tachometer signals from OBDII not from ADVANCE System, the wire is not necessary to be wired SP Green wire: for speed signal of ECU TA Blue wire: for tachometer signal of ECU To ADVANCE Control Unit Caution If there is an unwired wire, be sure to insulate it. (7) Locate the GNSS antenna near the vehicle window. Use the magnet of the antenna or double sided tape. Confirmation Do not tie the GNSS antenna's wire in a bundle. It may interfere the reception of the signals from satellites. Locate the GNSS antenna inside the vehicle cabin. If the signal receiving

24 condition is not good because of heat reflective glass, it's possible to locate the GNSS antenna on the vehicle roof; however, please be aware of pinching of the wire and dropping of the antenna. (8) Connect the OBDII wire and the adapter wire. And then connect the wire and the OBD connector of vehicle. Confirmation The OBDII wire does not need to be connected to vehicle if it is unused. In the case that your OBDII has a cover, it may not be completely closed by attaching this product to the OBDII connector. (9) Adjust each length of wires and connect the power source wire for DSDF, the GNSS antenna, the OBDII wire, and the switch unit for DSDF. See section "7. Part names and dimensions" on page 98. Caution Do not connect any wire to the extended connector(black). This product doesn't operate if a wrong wire is connected. (10) Connect DSDF and ADVANCE Control Unit/ADVANCE gauge/advance display by using the meter wire if you link DSDF and ADVANCE System. See section "5. System structure" on page 94. Confirmation DSDF needs to be connected to the end of the meter line from "METER OUTPUT" connector of ADVANCE Control Unit if it is connected to ADVANCE gauge/display because DSDF has only one connector for the meter wire. (11) Attach a USB flash drive as necessary. Purchase a commercially available USB flash drive. See section "13.1. About USB flash drive" on page 120. Confirmation Select a USB flash drive in consideration of the installation space. Once this product is fixed, connectors and a USB flash drive may not be mounted/ detached easily. Use an USB extension cable such as an angled 90 degree cable with male to female adapter if necessary. Give attention to the direction of the USB connector

25 (12) Fix DSDF and the switch unit for DSDF. See section "10.2. Installation of DSDF main unit" on page 106. See section "10.3. Installation of switch unit for DSDF" on page 107. (13) Connect the negative (-) battery. (14) Ensure all the parts are fixed and wires are connected. Then go on to the next chapter. See section "10.4. Operation check and settings" on page 108. Warning Carefully consider the installation location and driver's operation of the product before installation. Do not install the product where it interrupts driving and the safety deices of vehicle such as air bags. Be sure not to install the unit where it could fall. Improper installation or operation could cause the product to fall and damage the vehicle or cause serious danger by impeding driving. Ensure all the parts and wires are tightly attached, so they don't come loose and hinder driving. After installation, check that no materials or tools remain in the driver's seat or the engine compartment. If there are tools left at the feet of the driver's seat, this may cause a driver to lose control of brake because of tools or materials caught under the brake pedal. If there are tools in the engine compartment, the engine may break Installation of DSDF main unit Make a mounting panel by using the paper template. And then fix the DSDF main unit with mounting brackets, bolts, washers, spring washers, and nuts. See section "20. Paper template" on page 172. Caution Fix this product and a mounting panel tightly to vehicle with screws, adhesive bond and so on so that it does not come off by impact shock. Peel off the protection film on DSDF before using. The thickness of the mounting panel needs to be more than 2mm

26 DSDF main unit Mounting panel for DSDF (The shape is an example. Prepare an appropriate panel for your vehicle.) Bolts Mounting brackets Washers Spring washers Nuts Installation of switch unit for DSDF Position the switch unit by using the paper template and fix it with the mounting bracket and tapping screws. Then fit the switch unit into the mounting bracket surely. See section "20. Paper template" on page 172. Caution Fix the mounting bracket tightly to vehicle with tapping screws so that it does not come off by impact shock. Switch unit Mounting bracket Tapping screws (Fix the mounting bracket with screws.) -107-

27 10.4. Operation check and settings Procedure (1) If you install ADVANCE System in parallel Turn on the ignition and confirm the DC Source LED on ADVANCE Control Unit lights up. Refer to the manual for ADVANCE Control Unit (2) Confirm that the opening mode of DSDF is performed. See section "12.1. Opening mode/ending mode" on page 110. (3) Confirm that the state indicators light up. If you use OBD: OBD indicator If you use ADVANCE: ADVANCE indicator See section "12.6. State indicator" on page 119. (4) Confirm that there is no error message of OPEN/SHORT. See section "13.7. Warning display" on page 129. (5) Change the items displayed if desired. OBD items are set by default. See section "13.2. Meter changeover" on page 121. (6) Configure the system settings for display, units, and so on. See section "14.4. System settings" on page 139. (7) If you install ADVANCE System in parallel, configure the settings for ADVANCE System. See section "15. ADVANCE setup mode" on page 156. Confirmation After the system settings are completed, configure other settings as using this product if desired

28 11. Operation <for customer> Mode transition DSDF consists of the following modes. Opening mode Meter mode Peak display Street mode Circuit mode Gauge mode Time measure display Play display Warning display Time measure start Time measure settings Warm-up display Data management Menu mode System settings ADVANCE setup mode Trip reset Ending mode Display OFF Method of operation DSDF can be operated by both the touch panel and the switch unit for DSDF. Use either one depending on your situation. Operation Switch unit Touch panel Meter mode changeover Display menu mode DOWN switch (during meter mode) ENTER/MENU switch press and hold DOWN button (during meter mode) MENU button Return RETURN/RESET switch RETURN button Display peak values PEAK/SELECT switch UP button (during meter mode) Peak reset RETURN/RESET switch (during peak display) RETURN button -109-

29 12. Display <for customer> Opening mode/ending mode DSDF performs Opening mode after the ignition is turned on. DSDF performs Ending mode after the ignition is turned off and the power is turned off in all modes. Opening mode and Ending mode can be selected from 2 patterns by connecting DSDF to ADVANCE System. To changeover the pattern, slide the dip switch 2 on ADVANCE Control Unit. Refer to the manual for ADVANCE Control Unit. Confirmation Depending on vehicles, even if you turn off the key, the ignition does not turn off immediately. In that case, the ending mode will not be performed until the vehicle ignition is turned off Meter mode Meter mode is a main mode of DSDF. Vehicle data is displayed in real time during Meter mode. After Opening mode is performed, DSDF shifts to Meter mode. DSDF has 3 display patterns in Meter mode: Street mode, Circuit mode, and Gauge mode. Please switch the pattern of your choice. Confirmation Meter mode has 3 different display patterns and each has a name of mode; Circuit mode does not mean for use in curcuits

30 Display patterns Street mode Circuit mode Gauge mode How to change the display pattern During Meter mode touch panel touch DOWN button switch unit press DOWN switch The display patterns switch from Circuit mode to Gauge mode, to Street mode, and to Circuit mode again by rotation. Screen composition The screen is composed of Main area and Multi Information Display (MID) area. Main area Multi Information Display (MID) -111-

31 Main area Arbitrarily-chosen items are displayed in each display pattern. Main area is composed of bar gauges and digital gauges. (Gauge mode has only digital gauges.) Multi Information Display (MID) area MID area is separated from Main area. Various information is displayed at event occurrence. See section "12.3. Multi Information Display (MID)" on page Street mode 2 bar gauges and up to 4 digital gauges are displayed on screen. Bar gauge Digital gauge Bar gauge area Bar gauge area is composed of Outside bar and Inside bar. Outside bar Inside bar How to set The scale and items of Bar gauge area are set in System settings. See section "14.4. System settings" on page 139. Device for obtaining data Speed and tachometer signals for displaying bar gauge, sequential indicator, and so on can be selected from ADVANCE, OBD, and GPS. Select ADVANCE -112-

32 or OBD to display tachometer on bar gauge because tachometer signal cannot be obtained from GPS. Options:ADVANCE / OBD / GPS Default:OBD Confirmation If neither ADVANCE nor OBD is connected to DSDF, select GPS. See section " Device for indicator/bar/measure" on page 149. Outside bar Tachometer signal is displayed on outside bar. The real-time values and the latest peak value are displayed. The bar colors: gray in normal status, red in warning status, and yellow in precaution status. See section "13.7. Warning display" on page 129. See section "12.4. Sequential indicator" on page 118. Outside bar tachometer scale setting ( default) Scale Lower limit~upper limit Unit 6000 RPM 0~ RPM 0~ RPM( ) 0~9000 RPM 11000RPM 0~11000 See section " Tacho scale" on page 145. Inside bar Selected item in system settings is displayed on inside bar

33 Inside bar item/scale setting ( default) Item Tacho 1000RPM Turbo( ) Scale SI unit Lower limit~ Upper limit Unit Scale USDM unit Lower limit~ Upper limit Unit 0~1000 0~1000 RPM 0~1000 0~1000 RPM 20 kpa -1.0~0.2 3 PSI -30~3 120 kpa -1.0~ PSI -30~15 x100kpa 200 kpa( ) -1.0~ PSI( ) -30~ kpa -1.0~ PSI -30~45 Throttle - 0~100 % - 0~100 % Confirmation If you select turbo as inside bar, choose 300kPa scale when 300kPa sensor is installed. Choose 200kPa or less scale when sensor for 200kPa and under is installed. If unsuitable scale is selected, incorrect values are displayed. See section " TURBO/IN-MF. P. scale" on page 144. See section " Inside bar" on page 145. PSI Digital gauge area Digital gauge area is composed of several digital gauges. The display size can be changed between A-size and B-size. B-size is a size which 2 A-sizes are joined horizontally. A-size B-size The function of changing the size from A-size to B-size is not equipped with the product. This function will be available by applying the first update

34 How to set The item for displaying on digital gauge area is set by selecting/touching the area in Meter mode. See section "13.2. Meter changeover" on page 121. Display items See section "9. Display items/range" on page Circuit mode 1 bar gauge and up to 4 digital gauges are displayed on screen. Bar gauge area Bar gauge area is composed of 1 tachometer bar. The device for obtaining data, scales, display colors, and setting methods are the same as outside bar of Street mode. See section " Street mode" on page 112. Digital gauge area Digital gauge area is composed of several digital gauges. The size, display items, and setting methods are the same as Street mode. See section " Street mode" on page Gauge mode Up to 9 digital gauges are displayed on screen

35 Digital gauge area Digital gauge area is composed of several digital gauges. The size, display items, and setting methods are the same as Street mode. See section " Street mode" on page Multi Information Display (MID) Various information is displayed at event occurrence on the bottom of the panel. Main area During normal operation Multi Information Display (MID) During time measure [TIME elapsed time] is displayed. [TIME 0:00.00] is displayed when time is not measured. Display range:00:00.00 ~59:59.99 See section "13.5. Time measure display" on page 126. When best record is updated [RECORD best record] is displayed when best record is updated

36 See section "13.5. Time measure display" on page 126. When operated Each information is displayed when DSDF is operated to show peak values and log data. While showing peak values [PEAK HIGH] or [PEAK LOW] is displayed in MID area and peak values are displayed in Main area. See section "13.3. Peak display" on page 124. When peak values are reset [PEAK RESET] is displayed for one second and peak values are reset by touching the RETURN button or pressing the RETURN/RESET switch while showing peak values. See section "13.4. Peak reset" on page 125. While playing log data [PLAY elapsed time] is displayed in MID area and log data are played in Main area. Display range:00:00.00 ~59:59.90 See section "13.6. Play display" on page 128. At event occurrence During warning condition Numerical values of item in warning condition are displayed in red when the item is not displayed in Main area. When several items are in warning condition, the displayed item in MID area switches every 2 seconds. [OPEN] or [SHORT] is displayed at occurrence of an error of sensor or wiring. See section "13.7. Warning display" on page

37 During warm-up mode Numerical values of item in warm-up condition are displayed in blue when the item is not displayed in Main area. See section "13.8. Warm-up display" on page 130. At occurrence of a USB error [USB ERROR] is displayed when the USB flash drive has any trouble or is short on amount of space while data is written. See section "13.1. About USB flash drive" on page 120. Active display notice All of the digital displays linked to ADVANCE System including DSDF need to have "Display No." In addition, one of the digital displays needs to be set as an active display. When one DSDF is linked to ADVANCE System with no other digital displays, the DSDF is set as an active display automatically. The illumination of the whole ADVANCE System is controlled by using the dim sensor of the active display. See section " Display No." on page 153. [ACTIVE] is displayed for 2 seconds in MID area after opening mode is performed if DSDF is set as an active display. When several digital displays are linked to ADVANCE System, [ACTIVE] is displayed for 2 seconds in MID area when the DSDF is selected as an active display Sequential indicator 10 red LEDs light up or blink depending on tachometer signals and the setting. All the LEDs blink at the same time when the tachometer signal exceeds the warning set value. In addition, the LEDs light up gradually until the tachometer signal exceeds the warning set value. See section " Sequential indicator pattern" on page 147. See section " Sequential indicator step" on page

38 12.5. Side indicator The LED colors of side indicator changes depending on the mode and vehicle conditions. Condition/Mode Meter mode Warning Warm-up Menu/Setup ADVANCE settings New record Color white red blue green green yellow See section " Side indicator" on page State indicator GNSS indicator GNSS indicator lights up while receiving GNSS signal. OBD indicator OBD indicator lights up while receiving signals from OBD. ADVANCE indicator ADVANCE indicator light up while receiving signals from ADVANCE System. Confirmation GNSS signals cannot be received inside a building and a tunnel

39 13. Functions <for customer> About USB flash drive Record, replay, and analysis become possible by connecting a USB flash drive. Confirmation Do not turn off the battery while writing data into a USB flash drive. Otherwise, it will be damaged. Do not pull out/insert a USB flash drive while the ignition is on. Otherwise, the data will be damaged or the drive will not be recognized. Read the instructions of a USB flash drive carefully and use it properly. Before using a USB flash drive, format it in FAT32. A USB flash drive doesn't work properly if it is formatted in other formats. Purchase a commercially available USB flash drive. Some kinds of USB flash drives may not be compatible. Select a USB flash drive in consideration of the installation space. Once this product is fixed, connectors and a USB flash drive may not be mounted/ detached easily. Use an USB extension cable such as an angled 90 degree cable with male to female adapter if necessary. Give attention to the direction of the USB connector. The processing time will slow down due to the increase of the size and number of files. 200MB and over is necessary in a USB flash drive. Around 40MB is necessary to record the driving log data of 9 hours 59 minutes 59 seconds What you can do by connecting a USB flash drive Time measure Driving data logging (record) Driving data playing (replay) DSDF system update Driving data analysis by a dedicated PC software Operation-confirmed USB flash drives BUFFALO RUF2-JUF8GS (8GB) -120-

40 I-O DATA TB-XT8G/B (8GB) Verbatim USBE8GVZ1 (8GB) imation UFDNFE16GGR (16GB) The operation has been comfirmed by Defi. The USB flash drives listed above is not all that can be used with DSDF. (As of July, 2017) Meter changeover The display items and sizes in digital gauge area can be changed. Procedure The display items in digital gauge area can be selected from ADVANCE, OBD, and GPS signals. See section "9. Display items/range" on page 101. (1) Show a frame. During Meter mode touch panel touch any of digital gauge areas switch unit press ENTER/MENU switch frame (2) Move the frame to a digital gauge to be changed. While the frame is shown touch panel touch a digital gauge to be changed switch unit press any of UP, DOWN, LEFT, and RIGHT switches (3) Set the gauge to be changed. After setting, the item selection screen appears. After the frame is moved touch panel touch the center position inside the frame switch unit press ENTER/MENU switch -121-

41 (4) Select any of items listed on the item selection screen. There are several pages. Device names and pages are displayed in MID area. Confirmation The selected item is identified by a red check mark, while no check mark is displayed in this manual for the readability

42 Turning pages While item selection screen is displayed touch panel touch DOWN or UP button press DOWN switch when the frame is positioned at the switch unit bottom line or press UP switch when the frame is positioned at the top line This operation step for turning pages is the same in every mode. (5) Set the display item and return to Meter mode. While item selection screen is displayed touch panel touch an item to be displayed move the frame to an item to be displayed and press ENTER/ switch unit MENU switch How to change the size of digital gauges The size of digital gauges can be changed between A-size and B-size. A-size B-size The function of changing the size from A-size to B-size is not equipped with the product. This function will be available by applying the first update. Areas which the size can be changed between A-size and B-size Street mode Circuit mode Gauge mode (1) Show a frame

43 During Meter mode touch panel touch any of digital gauge areas switch unit press ENTER/MENU switch (2) Move the frame to a digital gauge to be resized. To change from A-size to B-size, select any of center areas. To change from B-size to A-size, select any of rightmost areas. While the frame is shown touch panel touch a digital gauge to be resized switch unit press any of UP, DOWN, LEFT, and RIGHT switches (3) Change the size. While the frame is shown touch panel touch DOWN button switch unit press PEAK/SELECT switch (4) Set the size. After setting, the frame disappears. While the frame is shown touch panel touch RETURN button switch unit press RETURN/RESET switch Peak display The maximum (high peak) and the minimum (low peak) values after the last -124-

44 reset of peak values are displayed. Low peak corresponds to oil pressure, fuel pressure, and differential pressure. [PEAK HIGH] and [PEAK LOW] is displayed in MID area. Regarding oil pressure, fuel pressure, and differential pressure, high peak and low peak values are displayed by rotation. Except for oil pressure, fuel pressure, and differential pressure, [ ] is displayed during the low peak display. How to display peak values Each peak value is displayed in the following order: high peak low peak Meter mode During Meter mode touch panel touch UP button switch unit press PEAK/SELECT switch Peak reset The high and low peak values of driving and idling including are reset

45 How to reset peak values All of the peak values are reset and [ ] is displayed in each gauge area. After resetting, [PEAK RESET] is displayed for one second in MID area. And then, it goes back to Meter mode. During Peak mode touch panel touch RETURN button switch unit press RETURN/RESET switch Time measure display The main functions of time measure is as follows: -time measuring depending the time measure conditions -saving log data to a USB flash drive There are measure conditions of 0-100km/h, 0-400m, courses, and so on. In addition, there is a condition of logging only. See section " Time measure conditions" on page

46 Warning Do not use the time measure function except logging only in open roads. It is only for circuits. Confirmation Vehicle speed values sent from a device set at P.149 " Device for indicator/bar/measure" are used for time measure. Purchase a commercially available USB flash drive to use the time measure function. 200MB and over is necessary in a USB flash drive. See section "13.1. About USB flash drive" on page 120. Folder structure in USB flash drive The following folders are created in a USB flash drive automatically by connecting and starting DSDF. DEFI DSDF log data maintenance file measure condition maintenance file course data file 1 course data file 2 LOGDATA log file 1 log file 2 DSDF folder A log data maintenance file, a measure condition maintenance file, and -127-

47 course data files will be saved in the DSDF folder. Measurement line data in each circuit will be saved in the course data files. Confirmation Do not edit the maintenance files. It might not work properly. If the maintenance files are deleted or edited by mistake, delete the DEFI folder once and reconnect a USB flash drive to DSDF and start DSDF again to make a new DEFI folder. LOGDATA folder Log files are created in the LOGDATA folder by using time measure function. The log files are replayed on DSDF and analyzed by the dedicated software for PCs. From start to finish of time measure is saved as one log file. A log file name is "year, month, day and time measure start time." e.g. If time measure starts at 12:34:56 pm, January 1st, 2017: _ log Data are saved every 0.1 seconds in log files. Maximum amount of time of continuous recording is 9 hours 59 minutes 59 seconds 90. [TIME elapsed time(xx:xx.xx)] is displayed in MID area during time measure. Time measure function doesn't start and [USB ERROR] is displayed in MID area when a USB flash drive is not connected or when the amount of space is under 200MB Play display Saved are replayed on DSDF. [PLAY elapsed time(xx:xx.xx)] is displayed in MID area during replays

48 13.7. Warning display While each sensor value exceeds the warning setup values (regarding oil pressure and fuel pressure, while each sensor value dips from the warning setup values), warning conditions are indicated. In addition, error messages are displayed when sensors or wires have any trouble such as a short circuit and disconnection if DSDF is connected to ADVANCE System. Side indicator Side indicators light up in red if the setting for side indicator is ON. See section "12.5. Side indicator" on page 119. Buzzer Warning buzzer sounds if the setting for warning buzzer is ON. See section " Warning buzzer" on page 144. LCD panel Displayed item in Meter mode: Values are displayed in red for minimum 5 seconds. Non-displayed item in Meter mode: Values are displayed in red in MID area for minimum 5 seconds. See section " OBD warning" on page 142. See section "15.1. ADVANCE warning setup" on page 156. Tachometer bar display Warning range is displayed in red. See section " Street mode" on page 112. Sequential indicator 10 LEDs blink while tachometer exceeds the warning setup value. See section "12.4. Sequential indicator" on page

49 When sensor errors occur Displayed item in Meter mode: [OPEN] or [SHORT] is displayed in the gauge area. Undisplayed item in Meter mode: [OPEN] [SHORT] is displayed in MID area. Caution Turn off the ignition and check the sensors and wires immediately when any error message is displayed. If the cause is not identified, ask for inspection of the store you purchased the product Warm-up display The warm-up function is available on water temperature and oil temperature. While the actual temperature is lower than the setting value, it is indicated as follows. Side indicator Side indicators light up in blue if the setting for side indicator is ON. See section "12.5. Side indicator" on page 119. LCD panel Displayed item in Meter mode: Values are displayed in blue. Non-displayed item in Meter mode: Values are displayed in blue in MID area. See section " Warm-up" on page

50 14. Menu mode <for customer> Menu items Menu TIME MEASURE START TIME MEASURE SETTINGS DATA MANAGEMENT SYSTEM SETTINGS TRIP RESET DISPLAY OFF Brief Start of time measure and record Setting of time measure condition such as 0-100km/h, 0-400m, course, and so on. Replay of log data and management of data Setting of units and display Reset of trip meter Turning off the touch panel and LEDs Confirmation The selected item is identified by a red check mark, while no check mark is displayed in this manual for the readability. How to enter Menu mode During Meter mode touch panel touch MENU button switch unit hold ENTER/MENU switch down for 1 second -131-

51 How to exit Menu mode During Menu mode touch panel touch RETURN button switch unit press RETURN/RESET switch How to turn the pages When there are several pages touch panel touch DOWN or UP button press DOWN switch when the frame is positioned at the switch unit bottom line or press UP switch when the frame is positioned at the top line How to select or set touch panel touch a desired area on the LCD panel move the frame to a desired area and press ENTER/MENU switch unit switch See section "11.2. Method of operation" on page Time measure start How to start time measure During Menu mode touch panel touch [TIME MEASURE START] move the frame to [TIME MEASURE START] and press ENTER/ switch unit MENU switch Confirmation Vehicle speed values sent from a device set at P.149 " Device for indicator/bar/measure" are used for time measure

52 In addition to the operation described above, time measure starts under the following conditions. If AUTO TIME MEASURE is ON Time measure condition km/h MPH Start conditions km/h 0-40MPH starts recording and measuring when vehicle km/h 0-60MPH speed is input after the above operation is km/h 0-120MPH done and vehicle is stopped once m 1/4mile 5 COURSE close course: starts recording when vehicle speed exceeds 5km/h and starts measuring when vehicle passes the measure line open course: starts recording and measuring when vehicle passes the measure line 6 RECORD ONLY starts recording when vehicle speed exceeds 5km/h If AUTO TIME MEASURE is OFF Time measure condition km/h MPH Start conditions km/h 0-40MPH starts recording and measuring when vehicle km/h 0-60MPH speed is input after the above operation is km/h 0-120MPH done and vehicle is stopped once m 1/4mile 5 COURSE close course: starts recording when the above operation is done and starts measuring when vehicle passes the measure line open course: starts recording when the above operation is done and starts measuring when vehicle passes the measure line 6 RECORD ONLY starts recording when the above operation is done See section "13.5. Time measure display" on page 126. See section " Auto time measure" on page

53 How to stop time measure During time measure touch panel touch RETURN button switch unit press RETURN/RESET switch In addition to the operation above, time measure stops at the following situations: when the ignition is turned off when the maximum recording time of log data passes under the following conditions Time measure condition Stop conditions km/h MPH km/h 0-40MPH km/h 0-60MPH km/h 0-120MPH m 1/4mile stops when the vehicle speed or distance reaches the selected time measure condition 5 COURSE open course: stops when vehicle passes the set line close course: stops only when the above operation is done 6 RECORD ONLY stops only when the above operation is done See section "13.5. Time measure display" on page Time measure settings "Time measure condition," "course select," and "new course create" are available Time measure conditions Time measure condition can be selected from the following conditions

54 Time measure condition km/h MPH Functions km/h 0-40MPH measuring the time from vehicle stop state km/h 0-60MPH until the vehicle speed reaches the set speed km/h 0-120MPH measuring the time from vehicle stop state m 1/4mile until the driving distance reaches the set distance 5 COURSE measuring the time by using the selected course lines 6 RECORD ONLY logging without reference to speed, distance, and courses Course select A course for time measure can be selected from course data in the DSDF folder in a USB flash drive

55 New course create Measuring lines can be created by using the GPS location signals. Procedure (1) Select CLOSE or OPEN. When creating a go-around course, select [CLOSE]. When start and goal positions are different, select [OPEN]. (2) Set a start line in [OPEN] mode and a measuring line in [CLOSE] mode. Move vehicle to the line position to be set, and then touch panel touch [OK] switch unit move the frame to [OK] and press ENTER/MENU switch If [CLOSE] is selected, a course creation is completed

56 (3) Set a goal line. Move vehicle to the goal line position to be set, and then touch panel touch [OK] switch unit move the frame to [OK] and press ENTER/MENU switch Created course data are saved in the DSDF folder and named automatically as "course_xxxxxx.txt." "XXXXXX" is a serial number Data management Log data and time records can be managed Log data play Log data in the LOGDATA folder can be replayed on DSDF. How to play data While log data are listed in LOG DATA PLAY touch panel touch the log file area to be played move the frame to the log file area to be played and press switch unit ENTER/MENU switch -137-

57 How to stop playing While a log file is being played touch panel touch RETURN button switch unit press RETURN/RESET switch In addition to the operation described above, playing stops when the file is ended. See section "13.6. Play display" on page Best time of time measure Best records of time measure such as 0-100km/h can be checked and deleted. To delete the record, select the time and touch [DELETE] button or press ENTER/MENU switch Best lap time Best records of each course can be checked and deleted. To delete the record, select the time and touch [DELETE] button or press ENTER/MENU switch

58 14.4. System settings Various systems can be set. Setting items Item Options/contents Default DIMMER FIXED MAX BRIGHTNESS BRIGHTER MIDDLE DARKER BRIGHTER AUTO TIME MEASURE ON OFF OFF LANGUAGE 日本語 (JAPANESE) ENGLISH 日本語 (JAPANESE) OBD WARNING TURBO/IN-MF. P. TACHO WATER TEMP 100kPa 7000RPM 105 WARNING LIMIT FOR OIL PRESS RPM 3000RPM WARNING BUZZER ON OFF ON TURBO/IN-MF. P. SCALE 20kPa 120kPa 200kPa 300kPa/ 3PSI 15PSI 30PSI 45PSI 200kPa TACHO SCALE RPM INSIDE BAR TURBO/IN-MF. P. TACHO1000RPM THROTTLE TURBO/IN-MF. P

59 Item Options/contents Default GEAR POSITION RANGE SPEED SETTINGS FOR GEAR POSITION 3~9 5 1~9 SINGLE OBD SPEED OFFSET -10 ~ +10% +3% SEQUENTIAL SINGLE DUAL INDICATOR PATTERN SEQUENTIAL INDICATOR STEP RPM DEVICE for INDICATOR/BAR/ MEASURE ADVANCE OBD GPS OBD WARM UP THROTTLE CALIBRATION WATER TEMP 0 ~ 150 /32 ~ 302 OIL TEMP 0 ~ 150 /32 ~ 302 FULL CLOSE FULL THROTTLE DEFAULT See section " Speed settings for gear position" on page 146. WATER TEMP 40 OIL TEMP 60 FULL CLOSE 0% FULL THROTTLE 100% SIDE INDICATOR ON OFF ON SPEED UNIT km/h MPH km/h PRESS UNIT kpa PSI kpa TEMP UNIT F TIME DIFFERENCE HOUR -12:00 ~ +12:00 +9:00 DISPLAY No. 1~7 7 TOUCH PANEL MODE NORMAL HIGH SENS. NORMAL SETTING VALUE RESET RESET ー UPDATE Update screen ー Confirmation There are several pages in system settings. [SYSTEM SETTINGS page number] is displayed in the bottom of the screen. Turn pages as necessary

60 See section "11.2. Method of operation" on page Dimmer The dimming level can be selected from 4 levels. Bright Display Fixed max brightness Brighter Middle Dark Bright Darker Outside Dark Auto time measure Time measure starts automatically when auto time measure in ON, a USB flash drive is connected, and the amount of space is over 200MB. See section "14.1. Time measure start" on page

61 Language The language can be selected from Japanese ( 日本語 ) and English OBD warning Warning value for OBD items can be set. Setting range Item Value 1 step TURBO/IN-MF.P ~ 155 kpa 10 kpa ~22.4 PSI 1 PSI TACHO 0 ~ RPM 100 RPM -142-

62 Item Value 1 step 0 ~ WATER TEMP 32 ~ How to change the setting values (1) Select an item to change the setting values. While the item is selected (the color of inside the frame is changed) touch panel touch UP or DOWN button switch unit press UP or DOWN switch (fast-forward by holding) (2) Set a value. touch panel touch the selected frame switch unit press ENTER/MENU switch From the following section, operate likewise Warning limit for oil press Warning output can be stopped when the tachometer signal is under the set value. Confirmation The tachometer signal taken out from the device set at P.149 " Device for indicator/bar/measure" is used. When tachometer signal cannot be taken out from the setting device, it does not function properly

63 Setting range Item Value 1 step TACHO 0 ~11000 RPM 500 RPM Warning buzzer The warning buzzer can be turned on/off. Warning buzzer sounds during warning conditions if the warning buzzer is ON. Buzzers except for warning buzzer cannot be turned off TURBO/IN-MF. P. scale The scale of turbo/intake manifold pressure bar display can be set

64 Tacho scale The scale of tachometer bar display can be set Inside bar The item to be displayed as inside bar in Street Mode can be set. Confirmation The signals taken out from the device set at P.149 " Device for indicator/bar/measure" are used. When signals cannot be taken out from the setting device, it does not function properly Gear position range The largest value for gear position can be set, e.g. 5 if vehicle is 5-speed trasnsmission

65 Speed settings for gear position Speed values at 2000RPM of each gear need to be input to calculate the gear position. Default Gear position Speed in km/h Speed in MPH 1st 16km/h 10MPH 2nd 30km/h 19MPH 3rd 43km/h 27MPH 4th 54km/h 34MPH 5th 67km/h 42MPH 6th 78km/h 48MPH 7th 90km/h 56MPH 8th 100km/h 62MPH 9th 110km/h 68MPH -146-

66 Setting range Item Value 1 step GEAR POSITION 1st~9th 0 ~400 km/h 1km/h 0~240 MPH 1MPH Input speed values from 1st to the largest gear position set in gear position range OBD speed offset A correction coefficient for OBD speed signals can be set. Most of the genuine speedometers are corrected for safety reasons and doesn't coincide with the OBD speed signals generally. Set the OBD speed offset as necessary. Setting range Item Value 1 step OBD SPEED OFFSET -10 ~ +10% 1% Sequential indicator pattern The lighting pattern of sequential indicators can be set

67 SINGLE:lights up from the left side DUAL:lights up from the both sides Confirmation SINGLE DUAL DUAL The tachometer signal taken out from the device set at P.149 " Device for indicator/bar/measure" is used. When tachometer signal cannot be taken out from the setting device, it does not function properly Sequential indicator step The lighting step of sequential indicator LEDs can be selected from 100, 200, 250, and 500RPM. 10 red LEDs light up gradually depending on tachometer signals and this setting. In addition, all the LEDs blink at the same time when the tachometer signal exceeds the warning set value. The lighting timing can be calculated by subtracting this step values from warning set value. Confirmation The tachometer signal taken out from the device set at P.149 " Device for indicator/bar/measure" is used. When tachometer signal cannot be taken out from the setting device, it does not function properly. Example 1: Warning setting 8000RPM + Single pattern + Step 200RPM 8000RPM and over All LEDs blink 7800RPM All LEDs light up 7600RPM 9 LEDs from the left side light up : 6000RPM 1 LED from the left side lights up Less than 6000RPM No LEDs light up -148-

68 Example 2: Warning setting 8000RPM + Dual pattern + Step 200RPM 8000RPM All LEDs blink 7800RPM All LEDs light up 7600RPM 4 LEDs from the right side and 4 LEDs from the left side light up : 7000RPM 1 LED from the right side and 1 LED from the left side light up Less than 7000RPM No LEDs light up If OBD is set as "Device for indicator/bar/measure," See section " OBD warning" on page 142. If ADVANCE is set as "Device for indicator/bar/measure," See section "15.1. ADVANCE warning setup" on page Device for indicator/bar/measure A device to take out speed and tachometer signals needs to be set for the following displays and functions. Sequential indicator Tachometer bar display of Meter Mode Speed signal for time measure Tachometer signal for warning limit for oil press Confirmation An unconnected device or a device with no signal input can be selected. It will not function properly if such a device is selected Warm-up Warm-up temperatures can be set. While the actual temperature is lower than the setting value, it is indicated as a warm-up display. See section "13.8. Warm-up display" on page

69 Setting range Item Value 1 step OIL TEMP / WATER TEMP 0~ ~ Throttle calibration Calibration values can be applied to throttle valve opening. Characters of throttle valve openings differ depending on vehicles. Throttle valve openings are generally not 0% when the accelerator pedal is released and not 100% when the accelerator pedal is floored. In this calibration, it is possible to set the throttle valve openings as FULL CLOSE (0%) at the time when the accelerator pedal is released and as FULL THROTTLE (100%) at the time when the accelerator pedal is floored. If DEFAULT is selected, raw data from OBD are displayed

70 Danger Do not turn on the engine when calibration is done. Turn on the ignition only and calibrate while vehicle is stopped. Setting range Item Value 1 step THROTTLE CALIBRATION 0 ~ 100% 1% Side indicator Side indicator can be turned on/off. See section "12.5. Side indicator" on page Speed unit The speed unit can be chosen from km/h and MPH Press unit The pressure unit can be chosen from kpa and PSI

71 Temp unit The temperature unit can be chosen from and F Time difference Set the time difference to toward the standard time (UTC). Japan standard time is +9: 00. Setting range Item Value 1 step TIME DIFFERENCE -12:0 0~+12: minutes -152-

72 Display No. Display No. needs to be set when more than one digital display other than DSDF is connected to ADVANCE System. In addition, one of the digital displays needs to be selected as an ACTIVE display in order to activate the dim sensor. The display (illumination) brightness is controlled automatically based on the dim sensor mounted on the ACTIVE display. To set an ACTIVE display, all the connected digital displays need to have each different display No. from 1 to 7. The numbers does not need to be consecutive. Refer to the manual for the ADVANCE digital display. See section "12.3. Multi Information Display (MID)" on page 116. Confirmation Each display needs to have a different display No. If any display other than DSDF is not connected to the ADVANCE System, this setting is not necessary. Setting range Item Value 1 step Display No. 1~ Touch panel mode The sensitivity of the touch panel can be set

73 Setting value reset All the setting values can be reset System update The system can be updated by using a USB flash drive. Update files can be downloaded from the Defi website. Updates will be announced on the Defi website. Save an update file to a USB flash drive and connect it to DSDF. Then choose SYSTEM UPDATE and press [OK] button

74 Caution Do not turn off the power while updating. Do not pull out the USB flash drive while updating. It may cause product malfunction or update error. Confirmation When an update file is broken or not found in a USB flash drive, DSDF is not updated. Please check the file Trip reset The trip meter of DSDF can be reset Display OFF The LCD panel and indicators can be turned off. To turn on the panel and indicators, touch the panel or press any switch

75 15. ADVANCE setup mode <for customer> "ADVANCE warning setup" and "ADVANCE System setup" can be set if DSDF is connected to ADVANCE System. Confirmation This section is applicable to DSDF which is connected to ADVANCE System. If ADVANCE System has already installed and configured, resetting is not necessary after installing DSDF. Refer to the manuals for ADVANCE Control Unit and ADVANCE digital display for details ADVANCE warning setup Operate with the switch for ADVANCE Control Unit. Set the slide switch to [SET] and press the [! WARN. SET] button. Set the slide switch to [REAL] after the setup is done ADVANCE System setup Operate with the switch for ADVANCE Control Unit. Set the slide switch to [SET]. Then press and hold the [! WARN. SET] button

76 Choose an item listed on the screen by pressing [UP / DOWN ] button. Then press [! WARN. SET] button. Set the slide switch to [REAL] after the setup is done. Setup items listed on DSDF in ADVANCE setup mode Setup items Setup options Unit Speed pulses 2, 4, 8, 16, FREE Number of engine cylinders 1, 2, 3, 4, 5, 6, 8 Tachometer response HIGH, MIDDLE, LOW Dimmer AUTO, MANUAL Special display Warm up Clock Items with are not displayed on DSDF because they concern only ADVANCE System not DSDF Speed pulse setting [SPEED PULSES] Set the number of peed pulse according to your vehicle. If your vehicle is not 2, 4, 8, or 16 pulse, the pulse free setting. Choose [FREE] and push [REC] button while the vehicle is moving at 60km/h. Warning Ask fellow passengers to operate. Do not operate while at the wheel. Operating while driving could result in an accident

77 Number of cylinders setting [ENGINE CYLINDERS] Set the number of cylinders of your vehicle Tachometer response setting [TACHO RESPONSE] Tachometer response can be selected from [HIGH], [MIDDLE], and [LOW] Dimmer setting [DIMMER] The dimmer setting for ADVANCE System can be selected between [AUTO] and [MANUAL]. The dimmer setting for DSDF is automatic only. 16. Troubleshooting <for customer and installation personnel> Warning If any indications of troubles are found in the product, stop the engine and check the product, wiring, and the vehicle right away. Continued use without checking could result in a serious accident. If any trouble is found while using, setting, and operating, ask the store where this product was installed or purchased to check the trouble. Inspection by a customer could result in accidents or malfunction