RSE 4-06 ORDERING CODE. DIRECTIONAL CONTROL VALVES KE qqqq Q(uD4 D n. 06 p max 35 MPa Q max 80 dm 3 /min. Du8

Transcription

1 DIRECTIONAL CONTROL VALVES KE qqqq Q(uD4 D n 06 p max 35 MPa Q max 80 dm 3 /min Selenoid operated directional control valves of type RSE4)06 are used to control start3 stop and direction of luid in hydraulic systems. Dn 063 NG 06 Selenoid operated Manual override Installation dimensions according to: CETOP RP 121)H 1CETOP 323 ISO DIN FUNCTIONAL DESCRIPTION Selenoid operated directional control valves RSE5hQ8 consist of cast iron valve housing 1 with control spool 2- centering springs 4 and operating selenoids 3y ey are being manufactured as twohposition direction control valves with one selenoid and one spring or threehposition directional control valves with two selenoid and two springsy DC selenoids are supplied through connectors A-B P5-6Sy For AC supply the selenoids are equipped with recti ers integrated to the DIN connector socket as a part of the selenoidsy e selenoid can be turned around its axis to any desired positiony Selenoids are designed for manual override allowing the control spool to be repositioned in case of power supply failure or A B GREY BLACK selenoids malfunctiony e valve housing 1 is phosphate coated and the selenoids 3 is zinc coatedy ORDERING CODE R S E / 1 1 ENVIROMENTAL RESISTANCE standard R S E directional control valve MANNER OF THE CONTROL selenoid operated innovation stage nominal size NUMBER OF VALVE POSITIONS twohposition threehposition spool type see Spool Type and Crossovers VERSION with return springs L A no designation 012S 024S 042S 205S 048U 115U 230U CONNECTOR EQUIPMENT connector with LED connector with LED and quenching diode standard connector according to DIN 548GQ RATED VOLTAGE OF SELENOIDS Dq V DC q5 V DC 5q V DC qqg V DC 5) V AC GQ P8QS Hz DDG V AC GQ P8QS Hz q4q V AC GQ P8QS Hz Du8

2 INSTALLATION, SERVICE AND MAINTENANCE Directional control valves RSE4-06 are designed for panel installation. They are being mounted by four screws M5x50 with torque 8Nm and can be installed in any working position. The reliability of the valves is conditional upon use of prescribed working fluid, especially its parameters such as cleanness and temperature. DELIVERY Selenoid operated directional control valves of type RSE4-06 are delivered assembled. Spare parts and mounting screws are not included in package. These must be ordered separetly. TECHNICAL DATA Technical data Symbol Unit Value Valve size D n mm 06 Maximal flow Q max dm 3 /min Maximal operating pressure in ports P, A, B pmax,a MPa Maximal operating pressure in port T pmax, t MPa Pressure drop Δp MPa see Operating Limits see Pressure Drop curves Viscosity range Maximum degree of fluid contamination Fluid temperature range t o po C EAmbient temperature range t o k C Enclosure type to EN IP 65 Hydraulic medium Weight - valve with 1 selenoid - valve with 2 selenoids ν m 2 /s up to m class 9 according to NAS 1638, 18/15 according to ISO 4406 kg -20 up to up to +50 Hydraulic oils of power class (HL,HLP) according to DIN Service life Installation dimensions Duty cycle Mounting position according to: >10 6 cycles DIN / ISO 4401 / CETOP RP121-H % 100 as desired PRESSURE DROP Δp = f(q) Δ 2 Measured at ϑ = 50 C, v = 35 mm /s Spool Respective pressure drop curve No.: type P A P B A T B T P T Z H Y Y L P B R X J R X J V1 1 1 A5 1 1 J7 1 1 C C Z P5 3 2 Y /6

3 OPERATING LIMITS 2 Measured at ϑ = 50 C, v = 35 mm /s Q max = f(p) Curve No.: Respective spool type: 1 Z1, B1, Y2, J14, J24, J74, J15, J25, J75 2 Y1, Y5 3 R2, X2 4 R1, X1 5 V1, A5 6 Z2 7 P1, P5 8 H1 9 C1, C2 10 L2 VALVE DIMMENSIONS 1.6 Required surface finish of subplate. O-RING 9.25 x /6

4 INSTALLATION DIMMENSIONS Note: Installation dimmensions according to ISO 4401, DIN , CETOP RP121-H (CETOP 3) 72,8 17,4 45 0,75 6 ± 0,1 22,5 31 ± 0,1 16,3 ± 0,1 26,6 ± 0,1 0,75 32,5 ± 0,1 10,3 ± 0,1 19 ± 0,1 27,8 ± 0,1 40,5 ± 0,1 SPOOL TYPES AND CROSSOVERS TWO POSITION Type Symbol Crossover 4/6

5 Type Symbol Crossover 5/6

6 SPOOL TYPES AND CROSSOVERS THREE POSITION Type Symbol Crossover SPARE PARTS Seal kit Type Standard NBR 80 Bolt kit NOTES Dimensions and quantity M5x50 DIN (4pcs) Dimensions and quantity Consultancy service is provided by: PQS Technology, Ltd. Sales department: tel.: Technical support: tel.: Fax: O-ring 9.25 x 1.78 mm (4pcs) x 1.78 mm (2pcs) Torque 8 [Nm] The data is subject to change. The manufacturer reserves the right to make changes and/or improvements without prior notice. It is understood that the information in this datasheet is being used at one's own risk. 6/6