Humming Aerospace Version 9 Blade ti
|
|
- Katherine Hampton
- 5 years ago
- Views:
Transcription
1 Humming Aerospace Version 9 Blade ti Designed By J Falk Hummingair LLC The Version 9 is a prototype carbon fiber intensive aircraft designed from the nose back to be much more efficient than existing aircraft of similar style and design. The performance gain over conventional aircraft construction and materials is result of extensive use of carbon fiber, boron fibers and titanium. The resin matrix is various Adtech Systems epoxies. The original design was studied and modified until the aircraft was at its optimum design iteration resulting in the Version 9. Several areas were changed not so much to improve performance but to address stability and interior space. In mold tooling for the wing root was left out so that the wing placement could be modified for several engine options ranging from Continental 360 series to the 540 then to the Allison 250 turbines. In the end the Continental 360 (220 HP) C series engine gave the best calculated performance to fuel burn ratios. However, the Allison 250, 310 Hp turbine resulted in a better cost per mile for present fuel costs. Performance calculations and flight stability studies were evaluated and tested by simulation. In the end this approach resulted in over 345 different designs. The simulation testing approach gave us over 600 hours of data to look at. Simulation was used extensively, it provided a much more rapid approach to design changes. In comparing simulation in- flight data came very close to calculated data. Another area that provided the ability to make changes was the use of Solidworks design and subsequent 3D printing of prototype tooling. The tooling for flaps, hinges, faring's and many other parts reduced tooling design and building time from weeks to just a few days. This freed most of the time up for other tasks while the 3d printer did its thing. 3D printing provided the ability to look at fitting and load calculations in real world time. Hinges could be put through failure & Interference analysis with revisions to design completed in a matter of minutes instead of days or weeks. For instance: The canopy hinges of the original design called for a standard high clearance hinge that would protrude into cockpit overhead area. This was unacceptable for many reasons but notable head injury potential. In just a matter of hours a new design was created and printed that eliminated the high clearance horseshoe hinge that could be incorporated into the canopy Landing gear eagle claw pattern
2 3D Printed Prototype Hinge TI 6AL4V and Gr2 brackets, misc parts TI Bellwashers Early on in the design stages it was decided to use tools (molds) to build all composite parts. Glass over foam core was rejected as a viable means of building this aircraft. Even though the glass over foam is a generally acceptable means of constructing aircraft today, we felt the time to get shapes correct was better used to build low production numbers tools similar to the old auto industry pattern shop practices. This approach resulted in highly accurate tools that could be easily modified in the event of changes compared to patterns with subsequent tools made from those patterns. This also eliminated post cure tool warp & shrinkage, providing more precision. Fuselage half pulled from tool in the Vulture's Nest. Fuselage wing assembly Wing Tool readied for upper wing surface construction, Tip tank
3 Dash Visor being fitted to the interior panel/ center pattern. Interior pattern work fitting to airframe. The composite construction was done with several weave types of Carbon fiber using different Adtech epoxy systems in a controlled environment. The fuselage was constructed using a 2X2 5.7oz twill and a10oz. 8 harness satin weave. 5 lbs. density core was bonded to that and capped with the 8 harness fabric. Out of autoclave wet lay-up with de-bulking and for bonding completed with vacuum assist to 29.3 hg. Adding to strength is the addition of load path structural members. The engine compartment in the following image shows this system clearly. There will also be load path structural members from the main wing spar box that carries through into the canopy framework and aft, terminating at the vertical stabilizer spar structure. Engine compartment showing sub-frame. Horizontals stab construction. The spars for the horizontal stab are comprised mostly of uni-directional carbon and are joined with a spar box both fore and aft. The horizontal stab spars are connected to a rotational bearing assemble that is attached to the vertical stab spar. The assembly allows for incidence adjustment of the H stab independent of the elevators and there assembles. There are three spars for the wings, one center main, a trailing and leading edge spars. The main spare are to independent bending beam spars that are tapered on the fuselage ends and overlap each other. The spars connected to the spar box assemble below the sol and seats. These spars are pined using a 1 inch grade 5 titanium king pin. The load path of the pins are carried into the carbon fiber/boron fiber spar via the 3 inch X.22 spar bushings. The other two spars are connected to the fuselage fore and aft of the main spar mounting points Titanium was the choice of metal preferred due to its high strength to weight ratio and its non-reactiveness to carbon fiber. It does require different machining and welding practices, however these issues or more about procedure that one needs only get used too. Argon environment chamber being the key to good welds. Titanium is the best choice for aircraft mechanical parts, eliminating the need for etching, priming and painting or powder coat. All of the ti parts to date are machined in-house. Only the highest quality US titanium is used.
4 Landing gear Landing gear are a modified oleo strut design. But with a hi-performance nitrogen charged spring/ shock enclosed inside the titanium tube housing. The lower strut has a dual teflon wear bushing that contacts the wall of the upper strut assembly. All components are made of titanium with the lower eagle claw being a carbon & boron fiber piece with titanium bushings for axel attachment. The epoxy system for this is a very high temp, high strength epoxy. Standard Grove 6 inch rims with 14 inch DIA goodyear flight eagle tires on all the three. Rolls Royce Allison 250 B-15 G fresh from Paramount International
5 Specs Single engine 4 place tractor conventional Retractable gear Length 23 feet Wing span 29.5 feet Weight 970 lbs. (calculated empty) Ramp average gal fuel Airfoil data; Main Root; NACA 64-(2)415 AOA.90 Tip; NACA 64(2) 212 AOA -1.0 Dihedral 5 degree Sweep-back (delta) 10 degree Sq. Footage 82 ft. Wing Loading lbs. Root 52 inch Tip 27 Slotted Fowler 25% Chord ratio, Location; 10% to 50% of span. 10, 20 & 30 degree Ailerons Frizz 25% " 50% to 70% Speed brakes.30 " 20 to 50% Vstab Naca 64 (1) 012 (approx. 15% of mains) Hstab Naca ( " 30%) Engine; Rolls Royce/Allison 250B15G, 317Bshp V1 62 kt V2 67Kt Stall 60Kt (no adverse stall surprises yet) Max rate of climb 25 deg about 3600 FPM to 3000, 75%-80% About 12% reduction in climb performance per 1k ft after 200kt power 70% Tested simulation top speed 383 kt (Allison 250 Hartzel 5 blade) Present Flight configuration characteristics; TO roll out is about 600 ft. accelerate to 70 kt in about 5 75% PWR Flaps 10 deg. Best approach kt, flaps 20-30deg. begin 70kt,speed brake, power off Max Xwind tested is (little tricky)
C-131 SAMARITAN CONSTRUCTION. A military transport based on the classic civilian twin-engine Convair CV-240 BY ANDY ANDERSON PHOTOS BY ANDY ANDERSON
CONSTRUCTION BY ANDY ANDERSON PHOTOS BY ANDY ANDERSON C-131 SAMARITAN A military transport based on the classic civilian twin-engine Convair CV-240 DESIGNED AS A REPLACEMENT for the Douglas DC-3, the CV-240
More informationDassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design
Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
More informationPAC 750XL PAC 750XL PAC-750XL
PAC 750XL The PAC 750XL combines a short take off and landing performance with a large load carrying capability. The PAC 750XL is a distinctive type. Its design philosophy is reflected in the aircraft's
More informationThe Airplane That Could!
The Airplane That Could! Critical Design Review December 6 th, 2008 Haoyun Fu Suzanne Lessack Andrew McArthur Nicholas Rooney Jin Yan Yang Yang Agenda Criteria Preliminary Designs Down Selection Features
More informationT-51 Mustang - 3/4 Scale Kit
T-51 Mustang - 3/4 Scale Kit Description Titan Aircraft is pleased to offer the T-51D Mustang. This P-51D replica incorporates material and systems not commonly found in comparably priced aircraft. This,
More informationDUCHESS BE-76 AND COMMERCIAL MULTI ADD-ON ORAL REVIEW FOR CHECKRIDE
DUCHESS BE-76 AND COMMERCIAL MULTI ADD-ON ORAL REVIEW FOR CHECKRIDE The Critical Engine The critical engine is the engine whose failure would most adversely affect the airplane s performance or handling
More informationVan s Aircraft RV-7A. Pilot s Operating Handbook N585RV
Van s Aircraft RV-7A Pilot s Operating Handbook N585RV PERFORMANCE SPECIFICATIONS SPAN:..25 0 LENGTH...20 4 HEIGHT:.. 7 10 SPEED: Maximum at Sea Level...180 knots Cruise, 75% Power at 8,000 Ft...170 knots
More informationAssembly and Operating Manual. SPECIFICATION Length inch (640mm) Wing Span inch (705mm) Flying Weight oz (330g)
Assembly and Operating Manual SPECIFICATION Length 25.19 inch (640mm) Wing Span 27.76 inch (705mm) Flying Weight 11.64 oz (330g) Dear customer, Assembly and Operating manual VIPER The Radio Control System
More informationThis Flight Planning Guide is published for the purpose of providing specific information for evaluating the performance of the Cessna Corvalis TT.
May 2010 TABLE OF CONTENTS This Flight Planning Guide is published for the purpose of providing specific information for evaluating the performance of the Cessna Corvalis TT. This guide is developed from
More informationLANCAIR LEGACY PRE-TEST FLIGHT INSPECTION (8-04)
LANCAIR LEGACY PRE-TEST FLIGHT INSPECTION (8-04) OWNER PHONE # ADDRESS N SERIAL # AIRCRAFT TYPE DATE / / TACH TIME hrs. TOTAL TIME hrs. EMPTY WEIGHT CG. PAINT & INTERIOR? YES NO ENGINE TYPE PROPELLER ALL
More informationCurtiss Canuck. R/C Scale Model Instructions. CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker
Curtiss Canuck 41 1/2 Curtiss Canuck R/C Scale Model Instructions CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker Manufactured and Distributed by: Bengtson
More informationSeabee Annual Inspection Procedures
Procedures Due to the wide variety of Seabee s flying out there, these procedures should be modified to fit YOUR Seabee. Make sure that all AD s are complied with as well as any required Service Bulletins
More informationTABLE OF CONTENTS CHAPTER 1, INTRODUCTION... 4 CHAPTER 2, DESCRIPTION... 4 CHAPTER 3, NORMAL PROCEDURES. 4 CHAPTER 4, EMERGENCY PROCEDURES.
Van Horn Aviation, L.L.C. TABLE OF CONTENTS TITLE PAGE NO. CHAPTER 1, INTRODUCTION... 4 CHAPTER 2, DESCRIPTION... 4 CHAPTER 3, NORMAL PROCEDURES. 4 CHAPTER 4, EMERGENCY PROCEDURES. 5 CHAPTER 5, AVIONICS....
More information70MM YAK-130 STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM
70MM YAK-130 REALISTIC RETRACT & FLAPS INSTALLED RIGID STRONG DURABLE EPO STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM Table of Contents Introductions 3 Contents of Kit 4 Assemble the plane 5 Battery
More information35MM Series Nano F15. Assembly and Operating Manual
35MM Series 2011 Assembly and Operating Manual SPECIFICATION: Length: 21-3/5"(550mm) Wing Span: 15-3/5"(395mm) Flying Weight: 5-4/5oz (165g.) Nano F15 Dear customer, Congratulations on your choice of a
More informationPage: REV 1: In Step 4 "a minimum of 1/16 [1.6 mm] gap" was "an approximately 1/16 [1.6 mm] gap."
14401 Keil Road NE, Aurora, Oregon, USA 97002 PHONE 503-678-6545 FAX 503-678-6560 www.vansaircraft.com info@vansaircraft.com Service Letters and Bulletins: www.vansaircraft.com/public/service.htm REVISION
More informationThank you again, Jim McCormick. Jabiru Pacific LLC
Thank you for your inquiry about Jabiru Aircraft. Jabiru Aircraft PTY, Ltd, produces a line of kit aircraft that are among the most extensively tested and thoroughly developed kit planes in the entire
More informationTurbinator-2 Build Manual
Turbinator-2 Build Manual Thank you for your purchase of the Turbinator-2 sport jet by Boomerang RC Jets. This RC Jet IS NOT A TOY and should only be flown and operated by experienced RC Turbine Pilots.
More informationDesign Considerations for Stability: Civil Aircraft
Design Considerations for Stability: Civil Aircraft From the discussion on aircraft behavior in a small disturbance, it is clear that both aircraft geometry and mass distribution are important in the design
More informationAlbatros CIII 38. R/C Scale Model Instructions
R/C Scale Model Instructions CONTACT INFORMATION Designed by M.K. Bengtson Manufactured and Distributed by: Bengtson Company e-mail: sales@aerodromerc.com Web Site: www.aerodromerc.com Albatros CIII Thank
More informationFUSELAGE ASSEMBLY SECOND SECTION (of three)
FUSELAGE ASSEMBLY SECOND SECTION (of three) 1 FRONT FLOOR ASSEMBLY The front floor assembly is fabricated from three pieces of the two ply pre-pregnated panel material supplied. The basic floor panel and
More informationPREFLIGHT CHECK COCKPIT RIGHT WING. NORMAL PROCEDURRES CHECKLIST PA-28RT 201 Arrow IV
NORMAL PROCEDURRES CHECKLIST PA-28RT 201 Arrow IV PREFLIGHT CHECK COCKPIT Control Wheel -- Release Restraints Avionics -- OFF Parking Brake -- SET All Switches -- OFF Mixture -- IDLE CUT-OFF Master Switch
More information11 - Fairings. Fairings. February XLF Page 11-1
11 - Fairings Fairings February 2003 11-XLF Page 11-1 11 - Fairings This Page Intentionally Left Blank Page 11-2 11-XLF February 2003 11 - Fairings Contents 11.0 - Chapter Preface... 11-4 11.0.1 - Parts
More informationJump to Table of Contents
Jump to Table of Contents PIPER AIRCRAFT CORPORATION PA-28R-201, CHEROKEE ARROW III SECTION 3 EMERGENCY PROCEDURES 3.3 EMERGENCY PROCEDURES CHECK LIST ENGINE FIRE DURING
More informationAircraft Design in a Nutshell
Dieter Scholz Aircraft Design in a Nutshell Based on the Aircraft Design Lecture Notes 1 Introduction The task of aircraft design in the practical sense is to supply the "geometrical description of a new
More information12/03 EXPLODED VIEW 1) L angles on first rear rib: moved from inboard to outboard side of rib (12/03)
ZODIAC CH 601 XL Drawing list December 04, 2003 3 rd revision of 2 nd edition 12/03 Summary of revisions from 07/03 to 11/03 AIRFRAME 6-X-0 DRAWING LIST Dec 4, 2003 6-X-1 6-T-0 6-T-1 6-T-2 6-T-3 6-T-4
More informationSD3-60 AIRCRAFT MAINTENANCE MANUAL. This chapter includes information on dimensions, areas, zoning, etc. and is presented as follows:
AMM 6-00-00 1.0.0.0GENERAL 1. General This chapter includes information on dimensions, areas, oning, etc. and is presented as follows: Measurements and Figures which show the stations of fuselage frames,
More informationChapter 2 Lecture 5 Data collection and preliminary three-view drawing - 2 Topic
Chapter 2 Lecture 5 Data collection and preliminary three-view dra - 2 Topic 2.3 Preliminary three-view dra Example 2.1 2.3 Preliminary three-view dra The preliminary three-view dra of the airplane gives
More informationAIRCRAFT DESIGN SUBSONIC JET TRANSPORT
AIRCRAFT DESIGN SUBSONIC JET TRANSPORT Analyzed by: Jin Mok Professor: Dr. R.H. Liebeck Date: June 6, 2014 1 Abstract The purpose of this report is to design the results of a given specification and to
More informationNew Design Concept of Compound Helicopter
New Design Concept of Compound Helicopter PRASETYO EDI, NUKMAN YUSOFF and AZNIJAR AHMAD YAZID Department of Engineering Design & Manufacture, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur,
More informationM-4-180V S2 M-4-180V S4. MAULE AIR, INC GA Hwy 133 South, Moultrie, GA / Phone (229) /
M-4-180V S2 M-4-180V S4 MAULE AIR, INC. 2099 GA Hwy 133 South, Moultrie, GA 31788 / Phone (229) 985-2045 / www.mauleairinc.com Models, Equipment, Colors and Other Items Are Subject To Change At Any Time
More informationPlease read all instructions carefully before assembly and flight!
Please read all instructions carefully before assembly and flight! Thank you for purchasing the Mig-15. This model is designed for the intermediate to advanced flyer. The model is receiver ready and includes
More informationCHECKLIST 1969 CESSNA 172-K. NOTE: Verify all information with airplane's POH
CHECKLIST 1969 CESSNA 172-K NOTE: Verify all information with airplane's POH PRE-FLIGHT INSPECTION 1 CABIN 1 A.R.R.O.W. CHECK Airworthiness Cert. In Clear View Registration In Clear View Radio License
More informationBuilding the HP-24 (Project) Bob Kuykendall 19 November 2005
1 2 Building the HP-24 (Project) Bob Kuykendall 19 November 2005 3 4 HP-24 Project Sailplane High-Performance 15m Flapped and Unflapped (Relatively) Low cost Supplied in quick-build kit Advanced features:
More informationAssembly and Operating Manual
Assembly and Operating Manual Dear customer, Congratulations on your choice of a factory-assembled model aircraft from the SKYANGEL Hummingbird range and thank you for placing your trust in us. Very little
More informationMD - RA. Minister s Delegates - Recreational Aviation Représentants du Ministre - Aviation de Loisir Service d Inspection
Think Safety Inspection Service MD - RA Pensons Sécurité Minister s Delegates - Recreational Aviation Représentants du Ministre - Aviation de Loisir Service d Inspection 51% Amateur Determination Checklist
More informationAssembly Manual. Version 01/01/2006
Assembly Manual ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr www.adjets.com Version 01/01/2006 INTRODUCTION is our new jet
More informationCleveland Quickie Piper Cub
Cleveland Quickie Piper Cub This plan package is not a 100% copy of the original kit. As you make your way through the instructions you will see the differences. Here s just a few of them: The one thing
More informationMD RA Minister's Delegates - Recreational Aviation Représentants du Ministre - Aviation de loisir
Think Safety Pensons Securite MD RA Minister's Delegates - Recreational Aviation Représentants du Ministre - Aviation de loisir Inspection Service Service d'inspection MDRA C20 MANUAL of PROCEDURES for
More informationN398CM. RC-3 Serial Number 387 Zero Timed Restoration Details
RC-3 Serial Number 387 Zero Timed Restoration Details WING GROUP: Complete disassembly of wings, flaps, ailerons, lift struts, floats, and float struts. removal, alodine dip, and epoxy prime, w/bms 10-11.
More informationAssembly and Operating Manual
Dear customer, Assembly and Operating Manual The radio control system Glued joints, suitable adhesives Congratulations on your choice of a factory-assembled model aircraft from the SKYANGEL Hummingbird
More informationAssembly and operating instructions. Assembly and Operating Manual
Assembly and operating instructions Assembly and Operating Manual Dear customer, Assembly and Operating Manual The radio control system Glued joints, suitable adhesives Congratulations on your choice of
More informationSupermarine Sparrow I 36 R/C Scale Model Instructions
Supermarine Sparrow I 36 R/C Scale Model Instructions CONTACT INFORMATION Designed by: M.K. Bengtson Prototype Builder: Mike Stanley Manufactured and Distributed by: Bengtson Company e-mail: sales@aerodromerc.com
More informationCARENADO COPYRIGHTS. Normal & Emergency Checklist
NORMAL PROCEDURES CHECKLIST PREFLIGHT CHECK Control wheel -- RELEASE BELTS Avionics -- OFF Master Switch -- ON Fuel quantity gauges -- CHECK Master switch -- OFF Ignition -- OFF Exterior -- CHECK FOR DAMAGE
More informationSTEP 1 - APPLYING HINGE BEVELS TO FRONT WING, REAR WING, VERTICAL STABILIZER, AND RUDDER FRONT WING (UNDERSIDE) 45 DOUBLE HINGE BEVEL
SkyRaiderv.b WING SPAN: FRONT - 22 in. REAR - 28.5 in. LENGTH: 35.25" WING AREA: 381 sqin. WEIGHT: 19-20oz. (RECOMMENDED) POWER: HACKER A20-20L, 10x3.8 APC PROP, 3S1P 1320mah Lipo 15C, 20A ESC RADIO: 4
More informationAssembly and operating instructions. Assembly and Operating Manual
Assembly and operating instructions Assembly and Operating Manual Dear customer, Assembly and Operating Manual The radio control system Glued joints, suitable adhesives Congratulations on your choice of
More informationPIPER CUB J3-65 N68952 PRE-FLIGHT CHECKLIST
PRE-FLIGHT CHECKLIST COCKPIT Check airworthiness certificate, registration, weight & balance documentation Battery - CONNECTED Plug in headsets or secure as required Fuel ON Primer CLOSED & LOCKED Carb
More informationROBUST AIRFRAME FOR UAV FLIGHT TESTING FOR SALE!
ROBUST AIRFRAME FOR UAV FLIGHT TESTING FOR SALE! My team specializes in fabricating airframes that s appropriate for testing unmanned aerial vehicle components. Our airframes are made of hybrid composite
More informationF-84G ThunderJet Construction Manual. Introduction
Introduction Thank you for purchasing the PST Jets F-84G ThunderJet kit. The PST F-84G is designed for use with 20 to 30 lb turbine engines. The PST F-84G is based on an accurate scale outline of the Republic
More informationSeabee Annual/100-Hour Inspection
Date Completed Seabee Annual/100-Hour Inspection ENGINE Mechanic s Initials 1 Drain engine oil and check for foreign material 2 Check oil screen for proper rotation or looseness 3 Safety Oil Plug 4 Refill
More informationAIRCRAFT CIRCULARS NATIONAL ADVISORY COMMITTEE FOR AERONAUTICS. No. 200 THE SHORT "SCION SENIOR" COMMERCIAL AIRPLANE (BRITISH)
AIRCRAFT CIRCULARS NATIONAL ADVISORY COMMITTEE FOR AERONAUTICS No. 200 THE SHORT "SCION SENIOR" COMMERCIAL AIRPLANE (BRITISH) A Pour-Engine High-Wing Cantilever Monoplane Washington February 1936 NATIONAL
More informationBuilding A Replica Aircraft. Part Three Construction Details Wings and Covering
Building A Replica Aircraft Part Three Construction Details Wings and Covering The human brain is a wonderful organ. It starts to work as soon as you are born and doesn't stop until you get up to deliver
More informationSD3-60 STRUCTURAL REPAIR MANUAL
SRM 1.0.0.0STRUCTURES - GENERAL 1. Introduction This chapter contains structural repair information of a general nature pertaining to the complete aircraft. Areas particularly prone to damage are shown.
More informationREVISION DESCRIPTION:
REVISION DESCRIPTION: 1) Page: 12-03 REV 1: Step 1: and Figure 1: Final-Drill s.b. Match-Drill. Step 4: Updated flox mixture description to match later description (removed "peanut butter-like" description).
More informationJODEL D.112 INFORMATION MANUAL C-FVOF
JODEL D.112 INFORMATION MANUAL C-FVOF Table of Contents I General Description...4 Dimensions:...4 Powertrain:...4 Landing gear:...4 Control travel:...4 II Limitations...5 Speed limits:...5 Airpeed indicator
More informationEasy to fly, affordable, and very durable CONTACT: Walter Janner Ebnit Dornbirn Austria / Europe
ZENITH STOL CH-801 SN: 801-4161 Easy to fly, affordable, and very durable CONTACT: Walter Janner Ebnit 60 6850 Dornbirn Austria / Europe Email: info@flyingcircus.at Phone: +43-(0)664/45 21 572 Zenith STOL
More informationIntroduction. Fuselage/Cockpit
Introduction The Moravan Zlin 242L is a fully aerobatic 2 seat aircraft designed to perform all advanced flight maneuvers within an envelope of -3.5 to +6 Gs. Many military and civilian flight-training
More informationSection 1.4 FINAL INSPECTION
File Number MDRA C20 MANUAL of PROCEDURES for INSPECTION of METAL, TUBE, FABRIC and WOOD AMATEUR-BUILT AIRCRAFT, INSPECTION AND TECHNICAL INFORMATION RECORD Section 1.4 FINAL INSPECTION GENERAL 1. Have
More informationBRISTOL BEAUFIGHTER by Ivan Pettigrew Construction Notes
BRISTOL BEAUFIGHTER by Ivan Pettigrew Construction Notes These plans are for an improved version of a model Beaufighter that was built in 1994. The first model had a span of 60 inches and wing area of
More informationPA28R ARROW CHECKLIST
PA28R ARROW CHECKLIST 2300.11.0112 1 Normal Procedures Initial PREFLIGHT CHECK General Appearance... CHECKED Position & Taxi Path... CHECKED Tie Downs, Locks, Chocks & Covers... REMOVED Cockpit Controls...UNLOCKED
More informationCHAPTER 10 TAIL ROTOR TABLE OF CONTENTS
CHAPTER 10 TAIL ROTOR TABLE OF CONTENTS INTRODUCTION 3 GENERAL 3 HUB ASSEMBLY 3 TRUNION 4 YOKE ASSEMBLY 4 BEARING HOUSING 5 BLADES 5 STRUCTURE 5 BLADE MAJOR PARTS 7 PITCH-CHANGE MECHANISM 7 PITCH HORNS
More informationTrainer Assembly Manual
Trainer Assembly Manual www.pilot-rc.com -Pilot Trainer- 1 -Pilot Trainer- 2 -Pilot Trainer- 3 -Preliminary i wing & stab assembly- 1-) Locate both Plywood wing joiners (Large and small one) 2-) Insert
More informationAssembly Manual. AVIATION Design
SCORPION Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr www.adjets.com Version 01/09/2009 AVIATION
More informationA-VIATOR (AP68TP 600) Presentation
A-VIATOR (AP68TP 600) Presentation All reasonable care has been taken by VULCANAIR to ensure the accuracy of the information contained in the present document. However, the material presented is provided
More informationSTORCH. Parts. Additional items needed to complete the Storch
STORCH Parts Fuse with Greenhouse- (Attached) Left and right wing panel Horizontal and vertical stab 2 Wing center blocks 2 Carbon spares for wing 1 Undercarriage with wheels 2 Undercarriage shocks 2 Carbon
More informationFUN-50 ARF ASSEMBLY MANUAL
FUN-50 ARF ASSEMBLY MANUAL This Manuel is the sole property of Kangke Industrial USA, Inc. Reproducing any part without the consent of Kangke Industrial USA, Inc. is a lawful violation. Kangke Industrial
More information2001 PRICE LIST. Photo Credit: Bill Fedorko, Custom Planes magazine - January Kemp St. Merritt Island, FL USA
2001 PRICE LIST Photo Credit: Bill Fedorko, Custom Planes magazine - January 2000 800 Kemp St. Merritt Island, FL 32952 USA Phone/Fax: 1 (321) 453-6641 http://www.aerocompinc.com AEROCOMP, INC. -- Year
More informationAppenidix E: Freewing MAE UAV analysis
Appenidix E: Freewing MAE UAV analysis The vehicle summary is presented in the form of plots and descriptive text. Two alternative mission altitudes were analyzed and both meet the desired mission duration.
More information2008 PRICE LIST. 900 Airport Rd Merritt Island, FL USA. Phone: (321) Fax: (321)
2008 PRICE LIST 900 Airport Rd Merritt Island, FL 32952 USA Phone: (321) 452-7168 Fax: (321) 452-1880 http://www.compairinc.com Comp Air -- Year 2008 Product Line Comp Air manufactures kits for a complete
More informationAssembly and Operating Manual HR-100. Specification: *Length: 41-7/10"(1060 mm) *Wing span: 49-1/5"(1250 mm) *Flying weight: 45.
Assembly and Operating Manual HR-100 Specification: *Length: 41-7/10"(1060 mm) *Wing span: 49-1/5"(1250 mm) *Flying weight: 45.9 oz (1300g) Dear customer, Congratulations on your choice of a factory-assembled
More informationInstruction Manual. SkyRacer. IMAA Legal Sport Aircraft For 35cc - 62cc size engines 84 Wingspan
Instruction Manual SkyRacer IMAA Legal Sport Aircraft For 35cc - 62cc size engines 84 Wingspan Eureka Aircraft Warranty Eureka Aircraft guarantees this kit to be free from defects in both material and
More informationA-VIATOR (AP68TP 600)
A-VIATOR (AP68TP 600) Presentation All reasonable care has been taken by VULCANAIR to ensure the accuracy of the information contained in the present document. However, the material presented is provided
More informationINDEX. Preflight Inspection Pages 2-4. Start Up.. Page 5. Take Off. Page 6. Approach to Landing. Pages 7-8. Emergency Procedures..
INDEX Preflight Inspection Pages 2-4 Start Up.. Page 5 Take Off. Page 6 Approach to Landing. Pages 7-8 Emergency Procedures.. Page 9 Engine Failure Pages 10-13 Propeller Governor Failure Page 14 Fire.
More informationOUTLINE. Commercial Requirements Insurance Mins Basic Info Systems Limitations Performance Charts Questions
T-34B GROUND SCHOOL OUTLINE Commercial Requirements Insurance Mins Basic Info Systems Limitations Performance Charts Questions COMMERCIAL REQUIREMENTS 61.129 Aeronautical experience. (a) For an airplane
More informationHere is the gap seal I used for the flaps, genuine hardware store quality. Note cross sectional shape visible on the right end.
HOMEBUILT AIRCRAFT DRAG REDUCTION - Case Study with a Lancair IV Part 3 Copyright - Fred Moreno - January 2009 Rev. 1 Portions may be reproduced for private, individual use 3- REDUCED AIRFRAME DRAG FOR
More informationInstruction Manual book
book ITEM CODE:BH 139 SPECIFICATION Wingspan : 1,450mm 57.09 in. Length : 1,140 mm 44.88 in. Weight : 3.3kg 7.26 Lbs. Radio : 05 channels. Servo : 07 mini servos+ 3servos Retracts (FUTABA S3170G) EDF:
More informationOriginal Engel Telemaster
Original Engel Telemaster Plans and Instructions This document shows the plans, sheet and on one page each, a translation of the German building instructions and bill of material, as well as scanned copies
More informationTheory of Flight. Main Teaching Points. Definition Parts of an Airplane Aircraft Construction Landing Gear Standard Terminology
Theory of Flight 6.01 Aircraft Design and Construction References: FTGU pages 9-14, 27 Main Teaching Points Parts of an Airplane Aircraft Construction Standard Terminology Definition The airplane is defined
More informationAIRCRAFT FAMILIARIZATION. Some questions may not apply to the aircraft you are flying.
541-895-5935 Name Date AIRCRAFT FAMILIARIZATION Note: If this information is not provided in the aircraft s flight manual give it your best guess. Some questions may not apply to the aircraft you are flying.
More informationAssembly and Operating Manual
Assembly and Operating Manual SCREAMER Specification: *Length: 20"(510 mm) *Wing span: 22 4/5"(580 mm) *Flying weight: 10 4/5 oz (305g) Dear customer, Congratulations on your choice of a factory-assembled
More informationAbout the EMB-312 T-27 Tucano
About the EMB-312 T-27 Tucano Projected in 1978 under Joseph Kovacs direction by Embraer, the EMB-312 is a single turbo prop engine basic trainer powered by Pratt & Whitney Canada PT6A-25C turning a HARTZEL
More informationfor AMT Pegasus jet engine or for Jet Cat P-120 / P-160 Assembly Manual AVIATION Design
for AMT Pegasus jet engine or for Jet Cat P-120 / P-160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
More informationN123AX Piper SARATOGA II HP (PA-32R-301) HANDLING NOTES
N123AX Piper SARATOGA II HP (PA-32R-301) HANDLING NOTES 1. ENGINE OPERATIONS Recommended starting procedures and checklists are supplied in the aeroplane Note: Oil capacity is 12 qts. Minimum for flight
More informationAVRO LANCASTER by Ivan Pettigrew Construction Notes
AVRO LANCASTER by Ivan Pettigrew Construction Notes For ease of transportation, the model may be built with the wing in three sections. The sections are held together with nylon clips. Assembly at the
More informationPIPER CUB J3-65 N68952 PRE-FLIGHT CHECKLIST COCKPIT
PIPER CUB J3-65 N68952 PRE-FLIGHT CHECKLIST COCKPIT Check airworthiness certificate, registration, weight & balance documentation Battery - CONNECTED Plug in headsets or secure as required Fuel ON Magnetos
More informationFalcon mkiii. Christian Perry Pleasant Grove, Utah November 2009
Falcon mkiii Christian Perry Pleasant Grove, Utah November 2009 This is my third build of the Falcon 120 from Nitro Planes. I have really enjoyed this jet and wanted to do the best I could with this build
More informationHawker Beechcraft Corporation on March 26, 2007
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION A00010WI Revision 8 Hawker Beechcraft 390 March 26, 2007 TYPE CERTIFICATE DATA SHEET NO. A00010WI This data sheet, which is part of Type Certificate
More informationDEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET NO. 1A13
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET NO. 1A13 1A13 Revision 27 Revo, Inc. COLONIAL C-1 COLONIAL C-2 LAKE LA-4 LAKE LA-4A LAKE LA-4P LAKE LA-4-200 LAKE
More informationAirworthiness Directive Schedule
Airworthiness Directive Schedule Aeroplanes Cessna 120 26 November 2015 Notes 1. This AD schedule is applicable to Cessna 120 aircraft manufactured under Federal Aviation Administration (FAA) Type Certificate
More informationAssembly and Operating Manual. 3D cap-232. Specification: *Length: 25-9/10"(655mm) *Wing Span: 29-3/5"(750mm) *Flying Weight: 15-9/10 oz (450g)
Assembly and Operating Manual 3D cap-232 Specification: *Length: 25-9/10"(655mm) *Wing Span: 29-3/5"(750mm) *Flying Weight: 15-9/10 oz (450g) Dear customer, Congratulations on your choice of a factory-assembled
More informationInitial / Recurrent Ground Take-Home Self-Test: The Beechcraft 58 Baron Systems, Components and Procedures
Initial / Recurrent Ground Take-Home Self-Test: The Beechcraft 58 Baron Systems, Components and Procedures Flight Express, Inc. This take-home self-test partially satisfies the recurrent ground training
More informationPilotRC Trainer USER MANUAL
PilotRC Trainer USER MANUAL Introduction Thank you for purchasing our Trainer plane. we strive to achieve a good quality quick build ARF aircraft. It requires the least amount of assembly of any ARF kit
More informationF3D-30 ARF ASSEMBLY MANUAL
F3D-30 ARF ASSEMBLY MANUAL This Manuel is the sole property of Kangke Industrial USA, Inc. Reproducing any part without the consent of Kangke Industrial USA, Inc. is a lawful violation. Kangke Industrial
More informationTYPE-CERTIFICATE DATA SHEET
TYPE-CERTIFICATE DATA SHEET NO. EASA.A.607 for BS 115 Type Certificate Holder BLACKSHAPE S.P.A. Strada Statale 16 KM 841+900 70043 Monopoli (BA) ITALY For models: BS 115 TE.CERT.00048-001 European Aviation
More informationJIM BEDE ADDS TWO HOMEBUILTS TO HIS LINE - THE BD-5J AND THE ALL NEW BD-6
Newest homebuilt from Jim Bede is the BD-6, a single-place version of the popular four-place BD-4. A BD-6 FOR $2000 JIM BEDE ADDS TWO HOMEBUILTS TO HIS LINE - THE BD-5J AND THE ALL NEW BD-6 By WALTER SHELBOURNE
More informationLockheed Martin. Team IDK Seung Soo Lee Ray Hernandez Chunyu PengHarshal Agarkar
Lockheed Martin Team IDK Seung Soo Lee Ray Hernandez Chunyu PengHarshal Agarkar Abstract Lockheed Martin has developed several different kinds of unmanned aerial vehicles that undergo harsh forces when
More informationWHISPERAIRCRAFT.COM THE NEW
WHISPERAIRCRAFT.COM THE NEW Welcome Welcome to the X350 Gen II "The X350 Gen II is one of those aircraft that makes you grin every time you take to the sky. To say the performance is spectacular would
More informationAdventure Awaits... MAULE
Adventure Awaits... MAULE 1 Fun, Easy To Fly, 4 Seat Taildragger or Nosewheel STOL aircraft Perfect Blend of Performance and Fuel Efficiency Very Agile and Versatile with Substantial Cargo Area Used Extensively
More informationAPR Performance APR004 Wing Profile CFD Analysis NOTES AND IMAGES
APR Performance APR004 Wing Profile CFD Analysis NOTES AND IMAGES Andrew Brilliant FXMD Aerodynamics Japan Office Document number: JP. AMB.11.6.17.002 Last revision: JP. AMB.11.6.24.003 Purpose This document
More informationMS:176 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
ASSEMBLY MANUAL MS:176 Graphics and specifications may change without notice. Specifications: Wing span ------------------------------98.4in (250cm). Wing area ----------------1576.4sq.in (101.7sq dm).
More information