William R. Heiden III, P.E.
|
|
- Samantha Garrett
- 5 years ago
- Views:
Transcription
1 William R. Heiden III, P.E. Georgia-Pacific Gypsum, LLC Product Evaluation Report 5/8" DensGlass Sheathing Mechanical Fastening to Steel Framing Glass-Mat Gypsum Substrate for use as Sheathing Applicable Codes & Standards 2010 Florida Building Code (FBC) American Society of Civil Engineers 7-10 (ASCE 7-10) Product Evaluator: William R. Heiden III, P.E N 500 E Macy, IN Phone - (574) WRH Project No April 22, 2012 THIS REPORT CONTAINS 9 PAGES, INCLUDING THIS COVER AND TABLE OF CONTENTS. ANY ADDITIONS TO, ALTERATIONS OF, OR UNAUTHORIZED USE OF EXCERPTS FROM THIS REPORT ARE EXPRESSLY FORBIDDEN. ---
2 Table of Contents Description Pages Mfg. & Test Agency info., Objective, Statement of Compliance Applicable ASTM Tests & Framing Materials 1 Referenced Test Reports 2 Summary of Test Results (ASTM E330) 3-4 Calculation of Wind Pressure Coefficients per ASCE 7-10 (C&C Method 1) 5 Basic Wind Speed (3-sec gust) for Georgia-Pacific 5/8" DensGlass Sheathing 6 Limitations of Use 7 April 22, 2012 THIS REPORT CONTAINS 9 PAGES, INCLUDING THIS COVER AND TABLE OF CONTENTS. ANY ADDITIONS TO, ALTERATIONS OF, OR UNAUTHORIZED USE OF EXCERPTS FROM THIS REPORT ARE EXPRESSLY FORBIDDEN. ---
3 Product Evaluated Georgia-Pacific 5/8" DensGlass Sheathing Manufacturer Location(s): Plant Address Plant Address ACME Loop 285 Lovell 2120 Lane 16-1/21/2 Quanah, TX Lovell, WY, Antioch 801 Minaker Savannah 151 Wahlstrom Avenue Antioch, CA, Savannah, GA, Caledonia 350 Argyle Street N. Sweetwater 310 FM 1856 Caledonia, ON, CA Sweetwater, TX, ON N3W 1M1 Canada Fort Dodge 2374 Mill Road Tacoma 1240 Alexander Avenue Fort Dodge, IA, Tacoma, WA, Las Vegas Old Salt Lake Highway Wheatfield 484 E County Road 1400N N. Las Vegas, NV, Wheatfield, IN Testing Organization: Progressive Engineering, g, Inc. ( (Pei ) Hurricane Testing Laboratory, LLC (HTL) State Rd Westfork Drive, Suite 106 Goshen, IN46528 Lithia Springs, GA Evaluation Objective: 1. Determination & publication of maximum applicable wind speed (3-sec gust) for Georgia-Pacific DensGlass Sheathing based on testing of various framing & fasteners systems. 2. Compliance of Georgia-Pacific DensGlass Sheathing with the Standard Specification for Glass-Mat Substrate for Use as Sheathing 3. Verification that Georgia-Pacific DensGlass Sheathing conforms to applicable Florida Building Code testing requirements. Statement of Compliance: As the product evaluator, the undersigned certifies that the product is in compliance with the requirements of the 2010 Florida Building Code. Applicable Tests: ASTM E330 ASTM C1177/ C1177 M-06 Standard test method for the structural performance of exterior windows, doors, skylights and curtain walls by uniform static air pressure difference. Standard specification for glass mat gypsum substrate t for use as sheathing. Framing Materials Steel Framing The steel framing shall comply with ASTM A653 with the minimum steel thickness for each nominal gauge size tested. Page 1 of 7
4 Product Evaluated Georgia-Pacific 5/8" DensGlass Sheathing Referenced Test Reports 1) Progressive Engineering, Inc. Report # (A) - Gypsum Substrate used as Sheathing (ASTM C-1177/C-1177 M-06) 2) Hurricane Testing Laboratory, LLC Report #G Negative Wind Load Test (ASTM E330) 5/8" DensGlass Gold Fireguard on 18ga.C-Studs/ Track Steel Framing using Page 2 of 7
5 Table 1. Test Results - ASTM E330 FASTENERS SHEATHING FRAMING 1 Report Testing Agency Specimen Type Spacing Type Width Length Thk. Type "C" Stud Thk. (min.) Track Thk. (min.) Stud Spacing Avg. Ultimate Load (PSF) Allowable Load 2 (PSF) G HTL 1-3 8" o.c. DensGlassy 48" 48" 5/8" 16 in G HTL 4-6 8" o.c. DensGlassy 48" 48" 5/8" 12 in G HTL 7-9 8" o.c. DensGlassy 48" 48" 5/8" 8 in G HTL " o.c. DensGlassy 48" 48" 5/8" 16 in G HTL " o.c. DensGlassy 48" 48" 5/8" 12 in G HTL " o.c. DensGlassy 48" 48" 5/8" 8 in G HTL " o.c. DensGlassy 48" 48" 5/8" 16 in G HTL " o.c. DensGlassy 48" 48" 5/8" 12 in G HTL " o.c. DensGlassy 48" 48" 5/8" 8 in CWN (cold formed steel framing - ) - "C" Stud Size 6"x1-5/8", Track Size 6" x 1-1/4" 2. The values are based on testing per ASTM E330, and represent the capacity of the sheathing to resist flexural failure or fastener pull-through using a 2.5 safety factor. 3. Framing design is the responsibility of the Designer of Record. Page 3 of 7
6 Table 1a. Test Results (ASTM C-1177/C-1177M) Flexural Strength Material Hardness Water Resistance Thickness Width Length End Squareness Humid. Deflection Nail Pull Resistance Edge End Core Edge Parallel Edge Perp. Thickness Specimen Construction Testing Agency Report (A) PEI ASTM C473-06a 5/8" " 1/16" -1/16" -1/16" 0.017" 10% Minimum Values per ASTM ASTM C1177/C1177M /8" 1/8" 0+1/8" 1/4" +1/16" 10% Test Result PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS Conclusion: The 5/8" DensGlass Sheathing meets the requirements as specified in ASTM C-1177/C-1177M Table 1b. Summary of Test Results 5/8" DensGlass Sheathing ASTM C1177 Meets Glass-mat Gypsum Substrate as Sheathing 1. Except as provided in FBC sections and Page 4 of 7
7 Table 2. Basic Wind Speed Coefficients & Constants Building Ht. (ft) Exp B Exp C Exp D K zt K d Zone 4 GC p Zone 5 GC p GCpi q (Zone 4) q (Zone 5) Building Ht. (ft) Exp B Exp C Exp D Exp B Exp C Exp D Sample: Maximum Basic Wind Speed (mph) K z q z = * K z * K zt * K d * V 2 *I Load Factor(1.6) * Design Wind Pressure (PSF) = q z * (GC p +GC pi ) Therefore, by substituting the panel Allowable Load (PSF) for the Design Wind Pressure and solving for the Maximum Basic Wind Speed the following equation is obtained. Max. Basic Wind Speed (V) = [(1.6 x Allowable Load)/( * K z * K zt * K d * (GC p +GC pi ))] 1/2 Page 5 of 7
8 Table 3. Maximum Basic Wind Speeds ASCE 7-10 Components & Cladding Method 1 (see Sample Calculation, pg. 5) Maximum Allowable Wind Speed - 3-second gust, Based on 2010 FBC Sheathing Panels 5/8" Georgia Pacific Panel Size & Direction Fastener Type Screw Spacing 8" o.c. 8" o.c. 8" o.c. 6" o.c. 6" o.c. 6" o.c. 4" o.c. 4" o.c. 4" o.c. Frame Type Thk. Stud Track Stud Spacing 16 o.c. 12 o.c. 8 o.c. 16 o.c. 12 o.c. 8 o.c. 16 o.c. 12 o.c. Allowable Load 1 (PSF) o.c Building Ht. (ft) Basic Wind Speed (MPH) Wall Zone 4 Basic Wind Speed (MPH) Wall Zone 5 Exp. B Exp. C Exp. D Exp. B Exp. C Exp. D Allowable Load = Average Ultimate Load/3 (Factor of Safety = 3) 2. PSF values are based on tested wall heights of 8 ft. (refer to HTL, LLC test reports referenced above). 3. Cold Formed Steel Framing () shall comply with ICC AC230, Nov. 1, 2010, section 3.3 for grades, dimensions, mechanical properties (Fy - 50 ksi min.) 4. Values listed are based on Risk Category II, Wind Load Importance Factor of 1.00 Page 6 of 7
9 Limitations of Use 1) Product(s) is to be installed on framing that is equal to or stronger than the materials listed. 2) Product(s) is to be installed on steel framing that is equal to or stronger than the listed. 3) Product(s) is to be installed only where the product assemblies listed meet or exceed the local wind speed and are in conformance with the 2010 FBC installation requirements. 4) Product(s) shall not be used as a nail base. Mechanical attachment of exterior claddings must be made directly to the framing. 5) Fasteners shall be driven flush with the gypsum panel surface without countersinking or being deep enough to break the glass mat. 6) Fasteners for wood panel sheathings (plywood and OSB) shall be driven no more than 1/16" from the panel surface with no more than two (2) out of ten (10) fasteners driven greater than 1/16" (per APA Technical Note TT-012A, 01/2007). 7) Product(s) shall be stored in the original unopened packaging at the site and stored in an enclosed shelter providing protection from physical damage and exposure from the elements until use. 8) Product(s) shall be stored to prevent exposure to standing or cascading water. 9) Product(s) must be installed per manufacturer's product literature and specifications. 10) This product evaluation report pertains only to the assemblies tested. Page 7 of 7
CREEK Technical Services, LLC
EVALUATION REPORT 2010 FLORIDA BUILDING CODE Manufacturer: ALUCOM, LLC Issued October 21, 2014 2145 NW 115 th Street Miami, FL 33172 (305) 414-2705 www.alucom.com Manufacturing Plants: Quality Assurance:
More informationCREEK Technical Services, LLC
a Certificate of Authorization No. 29824 17520 Edinburgh Drive Tampa, FL 33647 (813) 480-3421 EVALUATION REPORT FLORIDA BUILDING CODE, 6 TH EDITION (2017) Manufacturer: Issued March 19, 2018 2145 NW 115
More informationCode Compliance Research Report CCRR-0258
Code Compliance Research Report CCRR-0258 Issue Date: 10-31-2016 Renewal Date: 10-31-2017 DIVISION: 07 THERMAL AND MOISTURE PROTECTION Section: 07 45 00 Fiber-reinforced Cementitious Panels Nichiha USA
More informationSubmittal Requirements for Product Evaluation - Doors
TEXAS DEPARTMENT OF INSURANCE Engineering Services / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 Submittal Requirements for Product
More informationREPORT HOLDER: JAMES HARDIE BUILDING PRODUCTS INC ELM AVENUE FONTANA, CALIFORNIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 6 0543 www.icc es.org ESR 220 Reissued 03/ This report is subject to renewal 03/. DIVISION: 06 00 00 WOOD, PLASTICS
More informationTECHNICAL DATA SHEET Artisan Lap Siding
Artisan All national, state, and local building code requirements must be followed and where they are more stringent than the installation requirements, state and local Document Scope This document applies
More informationDIVISION: OPENINGS SECTION: UNIT SKYLIGHTS REPORT HOLDER: VELUX AMERICA LLC POST OFFICE 5001 GREENWOOD, SOUTH CAROLINA 29648
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-4108 Issued 12/2017 This report is subject to renewal 12/2018. DIVISION: 08 00 00
More informationEquivalency Evaluation to 2010 FBC
Equivalency Evaluation to 2010 FBC Date: PTC Report No.: Report Revision No.: PTC Project No.: Product Mfg.: Product Name: Product Category: Product Sub-Category: Compliance Method: Prepared By: December
More informationArtisan Siding with Lock Joint System
Document Scope General Description Artisan with Lock Joint System is noncombustible fiber-cement siding, manufactured by James Hardie s Inc. Dimension Composition Artisan with Lock Joint System is a Grade
More informationTECH BULLETIN. SIP No. Subject: Fiber Cement Siding from James Hardie. Date: February 2010 (Revised November 2015)
TECH BULLETIN SIP No. 2072 Subject: Fiber Cement Siding from James Hardie Date: February 2010 (Revised November 2015) James Hardie, a leader in the manufacture of fiber cement siding, has examined the
More informationProduct Evaluation Report
Product Evaluation Report Date: PTC Report No.: Report Revision No.: PTC Project No.: Product Mfg.: Product Name: Product Category: Product Sub-Category: Compliance Method: Prepared By: April 14, 2014
More informationEquivalency Evaluation to 2010 FBC
Equivalency Evaluation to 2010 FBC Date: PTC Report No.: Report Revision No.: PTC Project No.: Product Mfg.: Product Name: Product Category: Product Sub-Category: Compliance Method: Prepared By: December
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6457.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: In Swing Fiberglass Door with Side Lites SERIES/MODEL:
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6458.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: Fiberglass In Swing Glazed Double Doors SERIES/MODEL:
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6839.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: In Swing Fiberglass Double Doors with Speak Easy
More informationExpanding Your Solutions. ViperStud Product Catalog. Interior Non-Load Bearing Studs and Track
Expanding Your Solutions ViperStud Product Catalog Interior Non-Load Bearing Studs and Track Effective 5/11/18 #VSB5-5/15 By providing a lighter, stronger, more efficient framing system, ViperStud has
More informationOriginally Issued: 09/09/2014 Revised: 09/13/2017 Valid Through: 09/30/2018
ASC PROFILES LLC AEP SPAN AND ASC BUILDING PRODUCTS: SINGLE SKIN STEEL ROOF AND WALL PANELS WITH CONCEALED FASTENERS CSI : 07 61 00 Sheet Metal Roofing 07 64 00 Sheet Metal Wall Cladding 1.0 RECOGNITION
More informationAAMA/WDMA/CSA 101/I.S.2/A TEST REPORT. Rendered to: MASTER WINDOW SYSTEMS, INC.
AAMA/WDMA/CSA 101/I.S.2/A440-05 TEST REPORT Rendered to: MASTER WINDOW SYSTEMS, INC. SERIES/MODEL: Master 2000 Double Hung Window PRODUCT TYPE: PVC Double Hung Window Summary of Results Title Test Specimen
More informationAFG501 ALUMINUM FEMA 361 LOUVER LOUVER TYPE RECOMMENDED SPECIFICATION
LOUVER TYPE AFG501 ALUMINUM FEMA 361 LOUVER Visible Mullion Louver Type... AFG501 Blade Material... Extruded Aluminum, Alloy 6061-T6 Blade... 0.25 in. (6.35 mm) Frame Material... Formed Aluminum, Alloy
More informationIBC 2009/2012 COMPLIANT. Supreme Framing System. Product Catalog
IBC 2009/2012 COMPLIANT 2507 Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What is the Supreme Framing System? Supreme Framing
More informationNot to be distributed outside of FM Approvals and its affiliates except by Customer
Not to be distributed outside of FM Approvals and its affiliates except by Customer APPROVAL REPORT APPROVAL OF TUFFLITE TRIARCH MODEL ALT-CM- 1-PC AND TUFFLITE TRIARCH MODEL ALT-CM-2-CPC SKYLIGHTS PER
More information2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) Supreme Framing System Product Catalog
12 0 2 / 2009IANT C B I PL COM 2507 (IBC 2006 ONLY) 3054 (IBC 2006 ONLY) R Supreme Framing System Product Catalog Supreme Framing System The Benefits of Supreme Framing System Speak for Themselves What
More informationDASMA DASMA
DASMA 108-2017 Standard Method For Testing Sectional Garage Doors And Rolling Doors: Determination Of Structural Performance Under Uniform Static Air Pressure Difference DASMA 108-2017 Door & Access Systems
More informationExpanding Your Solutions. Steel Framing and Accessories. ICC ESR and 2015 IBC, IRC
Expanding Your Solutions Steel Framing and Accessories ICC ESR-30 20 and 2015 IBC, IRC Effective 1/4/2017 Table of Contents Introduction to CEMCO... 1 Product Identification... 2 3 LEED Certification...
More informationREPORT HOLDER: CLARKDIETRICH BUILDING SYSTEMS 9050 CENTRE POINTE DRIVE, SUITE 400 WEST CHESTER, OHIO EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1464 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More informationAlumaView AV200. A. Section Metal Fabrications: Miscellaneous for steel supports.
AlumaView AV200 PART 1 GENERAL 1.1 SECTION INCLUDES A. Commercial sectional doors. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Miscellaneous for steel supports. B. Section 08710 - Door
More informationSupreme. Supreme Framing System. Product Catalog IAPMO UNIFORM ER #0313
Supreme Supreme Framing System Product Catalog IAPMO UNIFORM ER #0313 2507 Table of Contents Certification of Materials 5 LEED Credits 5 Independent Product Certification 5 Code Approvals, Performance
More informationCritical Infrastructure Program
Critical Infrastructure Program Danny Kilcollins, FPEM Planning Manager Division of Emergency Management 05/06 County Base Grant Scope-of-Work; Critical Infrastructure Program Reqm ts #4 Hurricane Shelter
More informationThis product is no longer manufactured.
s t e e l R O O F d e c k L E G A C Y P R O D U C T This product is no longer manufactured. This product information has been made available to support the retrofit of existing buildings by providing the
More informationNFPA 285 TEST REPORT. Report No.: H Test Date: June 1, Rendered to: ARCONIC ARCHITECTURAL PRODUCTS Eastman, Georgia
NFPA 285 TEST REPORT Report No.: H1152.01-121-24 Test Date: June 1, 2017 Rendered to: ARCONIC ARCHITECTURAL PRODUCTS Eastman, Georgia WALL SYSTEM: Exterior Non-loadbearing Wall Assembly COMBUSTIBLE COMPONENTS:
More informationAAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-U1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
More informationProduct Evaluation Report
Product Evaluation Report PER-11044 Page 1 of 5 Initial Listing July, 2011 This Document Published By: Re-Approved May, 2018 Listed Product Flat & Raised Panel Cabinet Doors 5.2mm Industrial Panel with
More informationROUGH OPENINGS PRODUCT CATALOG STRONGER THAN STEEL. INTERIOR AND EXTERIOR FRAMING
PRODUCT CATALOG STRONGER SM THAN STEEL. INTERIOR AND EXTERIOR FRAMING MADE EASY. Rough openings have always been a challenge on the jobsite. At ClarkDietrich, we make them easy. Our collection of rough
More informationGENERATOR SHELTER IMPACT TEST REPORT (.08 Material)
GENERATOR SHELTER IMPACT TEST REPORT (.08 Material) Florida Division of Emergency Management 2555 Shumard Oak Boulevard Tallahassee, FL 32399 Office: 850-413-9969 Department of Management Services 4050
More informationLEGACY REPORT. (800) (562) A Subsidiary of the International Code Council
ICC-ES Legacy Report ER- Reissued May 0 www.icc-es.org (00) - () -0 A Subsidiary of the International Code Council Legacy report on the Uniform Building Code DIVISION: 0 DOORS AND WINDOWS Section: 0 Unit
More informationSTRUCTURAL EDGE ENGINEERING, PLLC
STRUCTURAL EDGE ENGINEERING, PLLC STRUCTURAL CALCULATIONS HINES BLD 3 BOISE, ID SE PROJECT NO: SE16-181 PREPARED FOR: CODE: DATE: NEUDESIGN ARCHITECTURE & LAWSON DESIGN INC 2012 IBC APRIL 23, 2017 683
More informationAmerican National Standard
STANDARD METHOD FOR TESTING SECTIONAL DOORS, ROLLING DOORS, AND FLEXIBLE DOORS: DETERMINATION OF STRUCTURAL PERFORMANCE UNDER MISSILE IMPACT AND CYCLIC WIND PRESSURE Door & Access Systems Manufacturers
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: 2100 REXFORD ROAD CHARLOTTE, NORTH CAROLINA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 3 658 (56) 699 053 www.icc es.org ESR 1 Reissued 1/01 This report is subject to renewal 1/0. DIVISION: 05 00 00 METALS SECTION:
More informationRETROFIT OF WINDOWS & DOORS (WINDLOAD PRESSURES)
RETROFIT OF WINDOWS & DOORS (WINDLOAD PRESSURES) EXAMPLE FOR: WINDOWS, DOORS & SHUTTERS EXPOSURE C, 140 M.P.H. 3 SEC GUST LOCATION: ZONE 4 Mean Roof Height = 15 feet Existing Openings = 38 x 38 = 1444
More informationThe following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15.
The following excerpt are pages from the North American Product Technical Guide, Volume 1: Direct Fastening, Edition 15. Please refer to the publication in its entirety for complete details on this product
More informationL. Roberto Lomas P.E. Engineering Evaluation Report 233 W. Main St. Danville, VA 24541 Report No.: 512711 434-688-0609 rllomas@lrlomaspe.com Manufacturer: Product Line: Altech Panel Systems, LLC 1 Johnson
More informationTEST REPORT. Rendered to: HOMELAND VINYL PRODUCTS, INC. For: PVC Guardrail System Utilizing New Nylon/PVC Rail Mounting Bracket
TEST REPORT Rendered to: HOMELAND VINYL PRODUCTS, INC. For: PVC Guardrail System Utilizing New Nylon/PVC Rail Mounting Bracket Report No: Report Date: 10/31/12 130 Derry Court York, PA 17406-8405 phone:
More informationSTRONGER THAN STEEL. interior and exterior framing
ROUGH OPENINGS PRODUCT CATALOG STRONGER SM THAN STEEL. interior and exterior framing rough openings ROUGH OPENINGS M A D E E A S Y. Rough openings have always been a challenge on the jobsite. At ClarkDietrich,
More informationClips, Bearing Plates and Fasteners for Standing Seam Panel Attachment
Clips, Bearing Plates and Fasteners for Standing Seam Panel Attachment SFS intec has been manufacturing standing seam clips for over thirty years and we are the metal building industry s most complete
More informationSteelForm S-24C SECTIONAL OVERHEAD DOORS
SteelForm S-24C SECTIONAL OVERHEAD DOORS ** NOTE TO SPECIFIER ** Raynor; commercial sectional overhead doors. This section is based on the products of Raynor, which is located at: 1101 East River Rd. P.
More informationLEGACY REPORT ER ICC Evaluation Service, Inc. Reissued May 1, Legacy report on the 1997 Uniform Building Code
LEGACY REPORT ER- Reissued May, 0 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 0 Workman Mill Road, Whittier, California 00 # () -0 Regional Office # 00 Montclair Road, Suite
More informationClips, Bearing Plates and Fasteners for Standing Seam Panel Attachment
Clips, Bearing Plates and Fasteners for Standing Seam Panel Attachment SFS intec has been manufacturing standing seam clips for over thirty years and we are the metal building industry s most complete
More informationContents. Preface 6. 1 Scope General Outside of scope Terminology Units of measurement 13 1.
Contents Preface 6 0 Introduction 8 0.1 General 8 0.1.1 Applicability 8 0.1.2 Sustainability 8 0.1.3 Content 8 0.2 Performance Classes and Grades 9 0.2.1 General 9 0.2.2 Guidance for the specifier/purchaser
More informationAAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-T1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
More informationOriginally Issued: 09/26/2012 Revised: 09/29/2017 Valid Through: 09/30/2018
EVALUATION SUBJECT: FAKRO FX, FV FVE, FX-EL, FV-ELA, AND FVE-ELA SKYLIGHTS REPORT HOLDER: FAKRO GROUP 144A WEGIERSKA STREET 33 300 NOWY SACZ POLAND 48 18-444 0444 www.fakro.info CSI Division: 08 00 00
More informationPOST-WELD TREATMENT OF A WELDED BRIDGE GIRDER BY ULTRASONIC IMPACT TREATMENT
POST-WELD TREATMENT OF A WELDED BRIDGE GIRDER BY ULTRASONIC IMPACT TREATMENT BY William Wright, PE Research Structural Engineer Federal Highway Administration Turner-Fairbank Highway Research Center 6300
More informationSTREAMLINED SOLAR CHECKLIST Owner Name:
STREAMLINED SOLAR CHECKLIST Owner Name: Address: DEPARTMENT OF PUBLIC WORKS AND PLANNING ALAN WEAVER, DIRECTOR This checklist must be completed by the contractor or an authorized agent of the contractor
More informationThermaSeal TM220 SECTIONAL OVERHEAD DOORS
ThermaSeal TM220 SECTIONAL OVERHEAD DOORS ** NOTE TO SPECIFIER ** Raynor; commercial sectional overhead doors. This section is based on the products of Raynor, which is located at: 1101 East River Rd.
More informationSINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT
PERFORMANCE EVALUATION OF SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT For Dominion Doors & Windows Ltd. IN ACCORDANCE WITH: AAMA/WDMA/CSA 101/I.S.2/A440-11 AND A440S1-17 Report
More informationLVL User s Guide. Technical Data for LVL Headers, Beams, Column Applications for Residential Floor and Roof Systems
LVL User s Guide Technical Data for LVL Headers, Beams, Column Applications for Residential Floor and Roof Systems U N I T E D S T A T E S V E R S I O N Quality Products Committed Service O U R H I S TO
More informationTable of Contents. PrimeJoist
JamStud Introduction Table of Contents PrimeJoist Introduc on...1 Fire & Sound Tested Assemblies...2 PrimeJoist Design Considera ons...3-4 PrimeJoist Product Profile...5 PrimeJoist Sec on Proper es...6
More informationwestern for products manufactured in White City, Oregon
western VERSA-LAM SPECIFIER Guide for products manufactured in White City, Oregon Western VERSA-LAM Guide 11/29/2012 2 VERSA-LAM Products An Introduction to VERSA-LAM Products When you specify VERSA-LAM
More informationConstruct Compressed Air Building Near Bldg SECTION OVERHEAD COILING DOORS 07/07
SECTION 08 33 23 OVERHEAD COILING DOORS 07/07 PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
More informationDESIGN CHART # 1: Lamit Basic S.I.P Properties
DESIGN CHART # 1: Lamit Basic S.I.P Properties LAMIT S.I.P. PROPERTIES - WEAK AXIS ORIENTED PARALLEL TO SPAN Panel Weight Core Facing Moment Section Elastic Shear Shear Radius Allowable Allowable Allowable
More informationAFL-501. Aluminum FEMA 361 Louver Chevron Blade Application and Design
FEMA 361 Louver Chevron Blade Application and Design is an aluminum louver designed to protect exterior wall penetrations on FEMA 361 or FEMA 320 compliant storm shelters or safe rooms. Design incorporates
More informationDIVISION: OPENINGS SECTION: UNIT SKYLIGHTS REPORT HOLDER: NATURAL LIGHT ENERGY SYSTEMS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3681 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 08 00
More informationDeltaStud - Lightweight Steel Framing
DeltaStud - Lightweight Steel Framing B C H A t P Load Tables for Wind Bearing and Combined Wind & Axial Load Bearing Condition January 2014 Table of Contents Commentary Introduction...3 Product Identification...3
More informationMeeting Residential Energy Requirements with Wood-Frame Construction
Meeting Residential Energy Requirements with Wood-Frame Construction Building Code Requirements Wood and wood-based products are widely used in building construction, due in part to favorable energy performance
More informationREVEAL SERIES ARCHITECTURAL DECK PRODUCTS CANADA
REVEAL SERIES ARCHITECTURAL DECK PRODUCTS CANADA ROOF AND FLOOR DECK CEILING SYSTEMS Reveal Series is a suite of metal deck systems that utilizes the inherent strength of structural deck and the aesthetic
More informationWIND MAP. United States
Special Wind Region (Consult Local Authorities) LOCATION V mph (m/s) Hawaii 105 (47) Puerto Rico 145 (65) Guam 170 (76) Virgin Islands 145 (65) American Samoa 125 (56) Notes: 1. Values are nominal design
More informationESR ICC Evaluation Service, Inc. Issued December 1, 2006 This report is subject to re-examination in one year.
ESR-2253 Issued December 1, 2006 This report is subject to re-examination in one year. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
More informationFSG-801. Fabricated Steel FEMA 361 Grille Chevron Blade. Application and Design. Standard Construction
FEMA 361 Grille Chevron Blade Application and Design is a severe duty fabricated steel grille designed to protect exterior wall penetrations on FEMA 320 or 361 compliant storm shelters or safe rooms. Most
More informationAIR-INS inc. 1320, boul. Lionel-Boulet, Varennes (Québec) J3X 1P7 Tél. : (450) Fax : (450)
1320, boul. Lionel-Boulet, Varennes (Québec) J3X 1P7 Tél. : (450) 652-0838 Fax : (450) 652-7588 info@air-ins.com FORCED-ENTRY RESISTANCE TESTS AS PER THE ASTM F476-84(2002) TESTING PROCEDURE ON AN ENTRANCE
More informationSECTION [ ] HIGH PERFORMANCE OVERHEAD HIGH SPEED DOORS. Display hidden notes to specifier. (Don't know how?
SECTION 08337 [08 33 23.13] HIGH PERFORMANCE OVERHEAD HIGH SPEED DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2016 ARCAT, Inc. - All rights reserved PART 1 GENERAL 1.1
More information%"!#!#%&'!# %##(%)"&#%$!!%'"%!'*%% SW 26 Street, Room 208,%! '#%# - '
"#$ %"##%&'# %##(%)"&#%$ %'"%'*%%+ 11805 SW 6 Street, Room 08,% '#%# - ' Miami, Florida 33175474 T (786) 315590 F (786) 315599...//001/ # (#*+ (3,4004135 1 678 9 ' 035 ' This NOA is being issued under
More informationTEST REPORT. Report No.: G Rendered to: SKYCO SKYLIGHTS Costa Mesa, California
TEST REPORT Report No.: G1418.01-301-44 Rendered to: SKYCO SKYLIGHTS Costa Mesa, California PRODUCT TYPE: Fall Protection Security Bars SERIES/MODEL: FSB-1A/FSB-10A/FSB-1/FSB-10 SPECIFICATION: Occupational
More informationMINI. Technical Data for. PWI Joists, PWLVL Headers, Beams, and Dimension
E N G I N E E R E D W O O D MINI Technical Data for PWI s, PWLVL Headers, Beams, and Dimension P R O D U C T S S A F E T Y, H A N D L I N G & P E R F O R M A N C E 2 SAFETY & CONSTRUCTION PRECAUTIONS INSTALLATION
More informationEcoStar Majestic Slate Roofing System
EcoStar Majestic Slate Roofing System General Design & Planning Criteria Table of Contents Page A. Description...2 B. Design Considerations...2 C. Quality Assurance...3 D. Warranty...4 E. Code Approvals...4
More informationAllowable Holes in VERSA-LAM Beams
VERSA-LAM Products 23 An Introduction to VERSA-LAM Products When you specify VERSA-LAM laminated veneer headers/beams, you are building quality into your design. They are excel lent as floor and roof framing
More informationImplementation and Thickness Optimization of Perpetual Pavements in Ohio
Implementation and Thickness Optimization of Perpetual Pavements in Ohio OTEC 2015 Issam Khoury, PhD, PE Russ College of Engineering and Technology Ohio University, Athens, Ohio Outline Background prior
More informationPERFORMANCE TEST REPORT. Rendered to: AIR VENT, INC. SERIES/MODEL: Hip Ridge Vent PRODUCT TYPE: Ridge Vent
Architectural Testing PERFORMANCE TEST REPORT Rendered to: AIR VENT, INC. SERIES/MODEL: Hip Ridge Vent PRODUCT TYPE: Ridge Vent This report contains in its entirety: Cover Page: 1 page Report Body: 6 pages
More informationTECHNICAL STANDARDS DOCUMENT No. 500, Revision 2 Low-Speed Vehicles
TECHNICAL STANDARDS DOCUMENT No. 500, Revision 2 Low-Speed Vehicles The text of this document is based on Federal Motor Vehicle Safety Standard No. 500, Low Speed Vehicles, as published in the U.S. Code
More informationWESTERN SPECIFIER. Technical Data for PWI Joists, PWLVL Headers, Beams, Rim Board, Stud, and Dimension
E N G I N E E R E D W O O D WESTERN SPECIFIER Technical Data for PWI Joists, PWLVL Headers, Beams, Rim Board, Stud, and Dimension P R O D U C T S JOIST DIMENSIONS 9½ LVL FLANGE PWI JOIST SERIES JOIST DIMENSIONS
More informationR APIDF LEX HIGH SPEED DOORS
R APIDF LEX HIGH SPEED DOORS PRODUCT LINE INTERIOR FABRIC DOORS EXTERIOR FABRIC & RUBBER DOORS MODELS 991/992 993/994/995 INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS RAPIDFLEX HIGH SPEED DOORS General
More informationDIVISION: METALS SECTION: COLD-FORMED METAL FRAMING REPORT HOLDER: WARE INDUSTRIES D/B/A MARINO\WARE
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3578 Reissued 0/206 This report is subject to renewal 0/208. DIVISION: 05 00 00 METALS SECTION:
More informationR APIDF LEX HIGH SPEED DOORS
R APIDF LEX HIGH SPEED DOORS PRODUCT LINE INTERIOR FABRIC DOORS EXTERIOR FABRIC & RUBBER DOORS MODELS 990/991/992 993/994/995 INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS RAPIDFLEX HIGH SPEED DOORS
More informationPost-Tensioned Concrete U-Girder Design. Midas Elite Speaker Series. Doug Midkiff, PE AECOM
Post-Tensioned Concrete U-Girder Midas Elite Speaker Series Doug Midkiff, PE AECOM POST-TENSIONED CONCRETE U-GIRDER BRIDGE DESIGN (I-49 LAFAYETTE CONNECTOR) Doug Midkiff Structural Engineer III AECOM E
More informationREVEAL SERIES ARCHITECTURAL DECK PRODUCTS
REVEAL SERIES ARCHITECTURAL DECK PRODUCTS ROOF AND FLOOR DECK CEILING SYSTEMS Reveal Series is a suite of metal deck systems that utilizes the inherent strength of structural deck and the aesthetic appeal
More informationPRODUCT EVALUATION Effective Date: July 1, 2014 RC-20
TEXAS DEPARTMENT OF INSURANCE Engineering Services Program / M03-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 PRODUCT EVALUATION Effective
More informationStructurlam Mass Timber Corporation Revised October 11, 2018
Structurlam CrossLam PR-L314C Structurlam Mass Timber Corporation Revised October 11, 2018 Products: Structurlam CrossLam Cross-Laminated Timber Structurlam Mass Timber Corporation 2176 Government Street
More informationAAMA/WDMA/CSA 101/I.S.2/A NAFS North American Fenestration Standard/Specification for windows, doors, and skylights
AAMA/WDMA/CSA 101/I.S.2/A440-08 NAFS North American Fenestration Standard/Specification for windows, doors, and skylights Registered trade-mark of American Architectural Manufacturers Association Registered
More informationDIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: CONSOLIDATED SYSTEMS, INC. (CSi )
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-2839 Reissued 05/2015 This report is subject to renewal 05/2016. DIVISION: 05 00 00 METALS SECTION:
More informationREVEAL SERIES ARCHITECTURAL DECK PRODUCTS UNITED STATES
REVEAL SERIES ARCHITECTURAL DECK PRODUCTS UNITED STATES ROOF AND FLOOR DECK CEILING SYSTEMS Reveal Series is a suite of metal deck systems that utilizes the inherent strength of structural deck and the
More informationWARRANTY AND LIMITATIONS
2 GENERAL INFORMATION QUALITY AND SERVICE COUNT Marino\Ware is proud to present this catalog that details our Lightweight Steel Framing Products. For over 70 years, Marino\Ware has been providing their
More informationIt s a big world out there, see more of it with a Panoramic Door
It s a big world out there, see more of it with a Panoramic Door. www.panoramicdoors.com ABSOLUTE VINYL SERIES DOOR The Panoramic Absolute Series Vinyl Door is an aluminum reinforced vinyl door built in
More informationCONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL
TEST REPORT: SERIES 8220 ALUMINUM SINGLE HUNG WINDOW Prepared for: 5625 E. Firestone Boulevard South Gate, CA 90280 1601 Luna Road S-UNITED, INC. Office: (972) 242-0556 Carrollton, Texas 75006 A Quality
More informationHURRICANE RATED GARAGE DOORS
HURRICANE RATED GARAGE DOORS STYLISH STRENGTH AMARR HURRICANE RATED DOORS With Amarr, you don t have to Withstand rapid cyclic pressure and compromise style for hurricane static load forces up to 45 mph.¹
More informationFDOT S CRITERIA FOR WIND ON PARTIALLY CONSTRUCTED BRIDGES
FDOT S CRITERIA FOR WIND ON PARTIALLY CONSTRUCTED BRIDGES DENNIS GOLABEK CHRISTINA FREEMAN BIOGRAPHY Mr. Golabek has recently joined Kisinger Campo & Associates and is the Chief Structures Engineer. He
More informationMaximum Span Tables. for Joists and Rafters. MSR Lumber. for Performance. Figure provided courtesy of the American Forest & Paper Association
Maximum Span Tables for Joists and Rafters MSR Lumber for Performance Figure provided courtesy of the American Forest & Paper Association 2 MSRLumber Producers Council Span Tables Purpose and Introduction
More informationcontinuous mounting flange intended for direct attachment to roofing substrate.
DIVISION: 08 - OPENINGS Section: 08 62 23 Tubular Skylight Section: 08 63 13 Domed Metal-Framed Skylight REPORT HOLDER: VELUX America, Inc. P.O. Box 5001 Greenwood, South Carolina 29648-5001 (864) 941-4828
More informationPVC SCHEDULE 40 FITTINGS
PVC SCHEDULE 40 FITTINGS Performance Engineered & Tested 40-2-0604 SPEARS Schedule 40 PVC fitting designs combine years of proven experience with computer generated stress analysis to yield the optimum
More informationADV-X HIGH SPEED DOORS
ADV-X HIGH SPEED DOORS Model 885 ADV-X MODEL 880 ADV-X FLEXIBLE BOTTOM INTERIOR HIGH SPEED FABRIC DOOR MODEL 881 ADV-X INTERIOR HIGH SPEED FABRIC DOOR MODEL 882 ADV-X STRUTTED INTERIOR HIGH SPEED FABRIC
More informationGP Lam LVL. Grade Thickness Depth , , , , , 149, 169, 189, 249 (209and 229 by special order) 2.
GP Lam LVL Grade Thickness Depth 2.0E 1 3 49, 3 1 29 7 1 49, 9 1 49, 9 1 29, 11 1 49, 11 7 89, 149, 169, 189, 249 (209and 229 by special order) 1.5E 1 3 49 7 1 49, 9 1 49, 9 1 29, 11 1 49, 11 7 89, 149,
More informationQualityWatch. Report Number 1 CAPA. November A Periodic Report on Non CAPA Certified Aftermarket Replacement Parts
CAPA QualityWatch A Periodic Report on Non CAPA Certified Aftermarket Replacement Parts Report Number 1 November 2011 1 Certified Automotive Parts Association 1000 Vermont Avenue NW Suite 1010 Washington,
More informationNot to be distributed outside of FM Approvals and its affiliates except by Customer APPROVAL REPORT. Skylight. VELUX America LLC
Not to be distributed outside of FM Approvals and its affiliates except by Customer Project No: 3060607 Class: 4431 APPROVAL REPORT Product Name: Product Type: Name of Listing Company: Address of Listing
More information