Bypass Isolation Transfer Switches Amperes
|
|
- Martin Alfred Walton
- 5 years ago
- Views:
Transcription
1 upersedes A pages 1-8, dated January Technical Data Effective: March 1 Page 1 Table of Contents Page Introduction witch Application ection Features, Benefits and Accessories Description Functional/perational Capabilities ogic witch and Feature election Transfer witch Dimensions Dimensions and Weights Combination and Automatic Proven switch designed to ensure reliable transfer from normal to auxiliary power sources for rapid restoration of essential power in critical applications.
2 Technical Data Page 2 Effective: March 1 Introduction Combination and Automatic are designed for applications where preventive maintenance, inspection and testing must be accomplished while maintaining continuity of power to the load. This is typically required in critical life support systems and standby power situations that require safe maintenance of the system with no disruption of the power. Combination and Automatic meet or exceed all industry standards for endurance, reliability and performance. They are listed under Underwriters aboratories U 1008 tandard for Transfer witch Equipment. They also comply with emergency and standby system requirements as defined in NFPA 99 for health care facilities. Design Highlights vercurrent protection available U 1008 service entrance available imple test circuit Designed to safely withstand fault currents eismic qualified for UBC Zone 4 Manufactured in an I 9002/14001 facility and designed in an I 9001 facility Withstand, Closing and Interrupting Ratings witch Amperes Number of witched Poles When Protected by MCCB s Test Voltage 240V (ka) 480V (ka) V (ka) When Protected by Fuses Rating (ka) 100 2, 3, , 3, , 3, , , Test Voltage Fuse Type J, T J, T J, T RK5 J, T J, T RK5 J, T Maximum Fuse Amperes Note: Main Power Contacts of the Normal Bypass witch, Emergency Bypass witch, Positive Isolating Mechanism and Automatic Transfer witch that make up the Combination and Automatic Transfer witch have identical withstand, closing and interrupting ratings as shown above. n 4-pole units, the witched Neutral Contacts have ratings identical to the Main Power Contacts. witch Application ection Transfer switch equipment offers flexibility and versatility to the system designer and user. All switches include the basic features necessary for normal operation as standard (see next page). also offers an extensive array of optional features and accessories that permits the user to customize a new transfer switch to match the application. The customization process is simple. elect the appropriate catalog number for your application from the charts. Then choose any optional features or accessories needed to complete the project requirements.
3 Technical Data Effective: March 1 Page 3 Features, Benefits and Accessories uperior Main Contact tructure The Combination and Automatic Transfer witch meets or exceeds the standards set forth in U 1008 and U 489. No other transfer switch manufacturer has meet the rigid testing requirements of this combination of standards. Completely enclosed contacts provide both safety and reliability. They also ensure the integrity of the contact assemblies and minimize the need for periodic maintenance of the contacts, reducing downtime and maintenance time. ong-ife Design Main contacts employ developed DE-IN arc quenchers and contact arcing horns for extended in-service life and reduced pitting and burning of contact services. imple, Reliable peration The automatic transfer switch is operated by a single, unidirectional gear motor transfer mechanism that receives its power from the source to which it is being transferred. Bypass and Isolating Mechanisms are manually operated by handles which ensure true quick-break, quick-make operation under full load conditions. ecure Isolation Triple interlocking of AT main contacts (2 mechanical, 1 electrical) ensure that both power sources cannot be simultaneously connected to the load. Bypass switches are key interlocked to prevent paralleling of sources. Versatile Control Control ogic Panel interconnects with Power witching Panel via insulated keyed plug connectors to permit total isolation of controls for routine maintenance. Engine tarting Contact Provides a 10 ampere, 30 Vdc contact closure to initiate engine starting upon failure of the Normal Power ource. This feature, specifically designed for low current applications, is wired to red terminal blocks on the control panel for ease of identification and maintenance. Full Phase Protection Provides phase failure protection on each phase of the Normal Power ource. hould the voltage drop below a pre-selected, fully adjustable value on any phase, a signal is sent to initiate engine start. Time Delay Normal to Emergency Provides a delay, adjustable 0-30 minutes, when transferring from the Normal Power ource to the Emergency Power ource. This accessory does not affect the engine starting circuit. Timing begins when emergency/ standby voltage begins. Time Delay engine tart This accessory is for use when the Emergency Power ource is an engine generator. It delays initiation of the engine start circuit for seconds (adjustable) in order to override momentary power outages or voltage fluctuations of the Normal Power ource. Time Delay Emergency to Normal Delays the retransfer from the Emergency/tandby Power ource to the Normal Power ource to permit stabilization of the Normal Power source before retransfer is made. Timing is adjustable 0-30 minutes and begins when the Normal Power ource appears. If the Emergency/ tandby Power ource fails during timing, retransfer to the Normal Power ource is immediate, overviding the time delay. Time Delay Engine Cooldown Permits the engine to continue to run unloaded after retransfer to the Normal Power ource has been made. Timing is adjustable 0-30 minutes and begins when retransfer is completed. Fully Rated Neutral Provides a fully rated solid neutral for all 2- and 3-pole switches. All 4-pole switches are supplied with switched neutral contacts of identical construction and rating as the power poles and are mounted on the power contact shaft, integral to the completely enclosed contact assemblies. Multi-Tap Voltage election Provides line voltage selection of 208, 220, 240, 380, 415, 480 or Vac, 50 to 60 Hz by proper insertion of voltage selection plug. Emergency/tandby ource Monitoring Relay monitor prevents transfer from the Normal Power ource to the Emergency/tandby Power ource until that source has attained 90% of nominal voltage and frequency. In addition, when the switch is in the Emergency/tandby position and that source falls outside the monitored parameters, a load retransfer is initiated to the Normal Power ource if it is present. Indicating ights Indicate switch position. Green for Normal position, red for Emergency/ tandby position. Relay Auxiliary Contacts Provides three Form C contacts for each source. n the Normal Power ource, energized when normal voltage is present. n the Emergency/tandby Power ource, energized whenever emergency/standby voltage is present. Description witch peration Bypass to Normal Turn Generator switch to FF Place isolating mechanism handle in FF position Turn and remove key Place key in NRMA BYPA lock Turn NRMA BYPA to N Bypass to Emergency Turn Generator switch to Run Place isolating mechanism handle in FF position Turn and remove key Place key in EMERGENCY BYPA lock Turn EMERGENCY BYPA to N Return to Normal peration Place appropriate bypass in FF position Turn and remove key Place key in isolating mechanism lock Place isolating mechanism handle in N position Turn Generator switch to AUT G Critical oads Typical Application Combination Bypass Isolation and Automatic Transfer witch
4 Technical Data Page 4 Effective: March 1 Description, Continued Benefits The Combination and Automatic Transfer witch eliminates all of the complicated drawout mechanisms required on competitive products for total isolation of the transfer switch, and instead utilizes foolproof mechanical Kirk Key interlocking combined with a positive Total Isolation Mechanism. The result is the safest, easiest-to-operate bypass isolation switch available in the marketplace today. When the transfer switch is in the Isolated position, complete testing of the AT can be accomplished via a special insulated keyed connector. This allows the operator to completely test the entire operating sequence of the AT while maintaining power to the connected load. The Combination and Automatic Transfer witch utilizes modified molded case switches, designed specifically for high duty repetitive load transfer, as a means to bypass and totally isolate the transfer switch. This device provides for a reliable, rugged installation that can withstand very high level short circuits. In addition, ampere units utilize eries C Technology that offers the highest Withstand, Closing and Interrupting Rating available in the marketplace today. W oad 5 oad Energized Incoming Emergency W ource Available R Energized Isolating Mechanism B Transfer witch Isolated when it Transfer witch Conpartment ingle-ine Diagram Typical Configuration R 2 4 K A Incoming Normal W Emergency Bypass Tripped A K Emergency Position ource Available R Energized Isolator Tripped G 1 3 K A Normal Bypass Tripped Normal Position
5 Technical Data Effective: March 1 Page 5 Functional and perational Capabilities ur overall design criteria is to provide you with a Combination and Automatic Transfer witch that offers the utmost in flexibility, reliability and value. The long list of standards and codes below illustrates the versatility of our unit. The Combination and Automatic Transfer witch meets or exceeds many national and international standards. It is also designed and built in accordance with the following: U 1008 tandard for safety for Automatic U 489 tandard for Circuit Breakers NEC Articles 517, 700, 701, 702 ANI/NFPA 70 NFPA 110 Emergency and tandby Power ystems EGA tandard for Transfer witches NEMA IC 10 UBC Uniform Building Code for eismic Zone 4 I 9000 International rganization for tandards I Manufacturing Facility Basic witch Design Combination and Automatic consist of a Normal Bypass witch, Emergency Bypass witch, a Positive Isolating Mechanism and an Automatic Transfer witch. All subassemblies are tested individually, and the complete assembly is subjected to full operational testing before shipment from s Transfer witch manufacturing facility located in Beaver, PA. Automatic Transfer witch Emergency Bypass witch Normal Bypass witch Positive Isolating Mechanism Ampere Combination and Automatic Transfer witch hown
6 Technical Data Page 6 Effective: March 1 ogic Application Versatility Whether the application calls for open or closed transition, manual or automatic operation, has the right logic controller for the task. IQ Transfer (ATC-) has set a new standard for transfer switch technology featuring: Microprocessor-based logic Digital display Field set point programmability Transfer history PowerNet Communications capability Voltmeter and frequency meter True rms voltage sensing Mimic BU/ED display oad voltage decay delayed transition capability In-phase monitor capability Field upgrade capability Automatic Transfer pen Transition IQ Transfer (ATC-) pen transition type PB transfer switches utilize the programmable IQ Transfer microprocessor-based logic controller. Available with: Time delayed neutral Delayed transition-load voltage decay In-phase Motor Ease of Maintenance ogic Disconnect Plugs Keyed quick-disconnect plugs are provided for easy and complete isolation of the control circuitry. Maintenance can be performed on the logic independent from the power sections and still allow the user to manually transfer power under full load conditions.
7 Technical Data Effective: March 1 Page 7 Catalog Number election Guide BIHI D B X U witch Type Transfer witch, IQ Transfer ogic Arrangement Normal/Emergency A = Fixed Mount, Molded Case witch (MC) Both B = Fixed Mount, Molded Case Circuit Breaker (MCCB) Both C = Fixed Mount, MCCB Normal, MC Emergency D = Fixed Mount, MC Normal, MCCB Emergency witch Rating 0100 = 100 Amperes 0150 = 150 Amperes 0225 = 225 Amperes 0300 = 300 Amperes 0400 = 400 Amperes 0 = Amperes 0800 = 800 Amperes 1000 =1000 Amperes Enclosure Type = NEMA 1 Frame Amperes FD = 100 KD = D = 400 MA = Number of witched Poles 2 = 2-Pole 3 = 3-Pole 4 = 4-Pole Voltage/Frequency A = 120V 60 Hz B = 208V 60 Hz E = V 60 Hz G = 220V 50/60 Hz H = 380V 50 Hz K = V 50 Hz M = 230V 50 Hz N = 401V 50 Hz = 415V 50 Hz W = 240V 60 Hz X = 480V 60 Hz Z = 365V 50 Hz isted U = U isted Catalog Number ystem ample shows Catalog Number BIHIDB30400XU with optional features 16B, 23J, 42. The example would specify the following: Transfer witch 480 volts 3-phase 4-wire 3-pole 400 ampere, D frame Integral overcurrent protection both sources IQ Transfer NEMA 1 enclosure U listed to U1008 standard Plant exerciser eismic Zone 4 certified Feature Group 9 included
8 Technical Data Page 8 Effective: March 1 witch and Feature election Feature Number Available ptions G9 G9 for IQ Transfer (ATC-) Description BIHI eries C Combination Bypass IQ Transfer ogic Includes the most often selected options (1-2B-3-4-5B-12C-12D-14C-14D) listed below Includes the most often selected options ( B/5J-12C-12D-12G-12H-14C-14D) listed below 1 Time Delay Normal to Emergency (TDNE) 2 Time Delay Engine tart (TDE) Adjustable seconds (IQ Transfer nly) 2B 2C Adjustable.5-15 seconds Adjustable seconds 3 Time Delay Emergency to Normal (TDEN) 4 Time Delay Engine Cool-off (TDEC) 5 Emergency ource ensing 5B 5C 5D 5E 5F 5G 5H 5J 5K 1-Phase Under Voltage/Under Frequency 1-Phase ver Voltage/ver Frequency 1-Phase Under Voltage 1-Phase ver Voltage 3-Phase Under Voltage 3-Phase ver Voltage Phase Reversal 3-Phase Under Voltage/Under Frequency 3-Phase ver Voltage/ver Frequency 6 6D 6H Alternate Test perators/momentary Test Pushbutton Maintained 2-Position Test witch Maintained 4-Position Test witch 7 Time Delay Emergency Fail 8 Pushbutton Bypass of Time Delays 8C 8D Bypass TDEN (Feature 3 Required) Bypass TDNE (Feature 1 Required) B 10B 10D 12C 12D 12G 12H 12 12M 14C 14D 16N 16E 16B 17C Maintenance elector witch Permits Isolation of Electric perator Preferred ource elector witch Utility to Utility or Utility to Generator Generator to Generator Pilot ights Normal Position Emergency Position Normal ource Available Emergency ource Available Normal Tripped (Requires Feature 16) Emergency Tripped (Requires Feature 16) Auxiliary Relay Contacts Normal ource Available 4N/4NC Emergency ource Available 4N/4NC 2N/2NC on PB witches only Integral vercurrent Protection Normal ide nly A A 400A A A 1-0A A Emergency ide nly (ame price as 16N) Both Normal and Emergency ides (Double Price of 16N) High Withstand Rating 100 ka at 480 Vac = ptional Feature; = tandard Feature; TBA = Availability to be Announced Call Factory
9 Technical Data Effective: March 1 Page 9 witch and Feature election, Continued Feature Number Available ptions 18 18I 18J 18K 18 18P 18Q 18R 18 18T Description IQ Metering IQ Generator Normal nly IQ Generator Emergency nly IQ Generator electable, Normal or Emergency IQ Analyzer Normal nly IQ Analyzer Emergency nly IQ Analyzer electable, Normal or Emergency DP4000 Normal nly DP4000 Emergency nly DP4000 electable, Normal or Emergency 20A Rear Bus Connections 21A Non-tandard ugs eries C PB 23 Automatic Plant Exerciser Timer 23C No oad Exercise 23D oad Exercise 23G electable oad/no oad Exercise 23I ame as 23D with Fail-safe 23J ame as 23G with Fail-safe C 24D 26C 26D 26E 26F 26H elf-contained Battery Charger 120 Vac Input, 12 Vdc utput 120 Vac Input, 24 Vdc utput Normal ource ensing All Phases Under Voltage 1-Phase Under Voltage All Phases ver Voltage Go to Emergency Contact (Area Protection) Under Frequency ver Frequency Phase Reversal BIHI eries C Combination Bypass IQ Transfer ogic 29 Alternate Modes of peration 29E 29G 29J Automatic N to E Pushbutton Return to N electable Automatic or Pushbutton peration witch Cannot be U listed with this Feature electable Automatic E or N or Pushbutton E to N Auto N-E 30A Cranking imiter A 32B 32C 32D 33A 33B Delayed Transition peration Modes Time Delay Neutral Timer oad Voltage Decay In-phase Monitor/oad Voltage Decay In-phase Monitor/Time Delay Neutral Timer hunt Trips for Customer Connectors Normal ide 120 Vac Emergency ide 120 Vac 34 ogic Extender Cable pecify ength: 48, 72, 96, 120, or 144-inch 35A Pretransfer ignal Contacts 2 N/NC 36 oad hed from Emergency from Remote et 37 Rated as uitable for Use as ervice Equipment Requires Feature 16B or 16N 37A 37B Without Ground Fault Protection Amperes With Ground Fault Amperes Amperes GFP Required if 1000A and above if 480 Vac 41 41A 41B 41C pace Heater with Thermostat 100 Watts Watts 400 Watts 42 iesmic Zone 4 Certified 45 oad equencing Contacts 47 Closed Transition Feature ets 47C 47D Closed/In-phase/oad Voltage Decay Closed Transition nly = ptional Feature; = tandard Feature; TBA = Availability to be Announced Call Factory
10 Technical Data Page 10 Effective: March 1 Transfer witch Dimensions in Inches (mm) (762.0) Ref (723.9) Ref (228.6) Ref (457.2) Ref. A B CC Clear C Cable Entry Front Top View (1828.8) Ref (1589.0) (1253.5) (1389.1) (560.3) Front View ide View 100 Ampere Enclosure Dimensions (1219.2) Ref (1181.1) Ref (146.1) Ref (863.6) Ref (571.5) Ref. A B CC Clear C Cable Entry ervice Equiptment abel (If Required) (355.6) Front Top View FF (2286.0) Ref (1854.2) (1465.6) Max (560.3) Front View ide View Ampere Enclosure Dimensions Dimensions are approximate in inches (mm) and should not be used for construction purposes.
11 Technical Data Effective: March 1 Page 11 Dimensions and Weights Transfer witch Ampere Rating Dimensions and Conduit penings in Inches (mm) A Width B Depth C CC Cable pace Depth Weight bs. (kg) 100 Fixed 30 (762.0) 18 (457.2) 25 (635.0) 10 (254.0) (273) Fixed 48 (1219.2) 34 (863.6) 43 (109.2) 13 (330.2) 1300 (590) 400 Fixed 48 (1219.2) 48 (1219.2) 48 (1219.2) 48 (1219.2) 1400 (636) Fixed 48 (1219.2) 48 (1219.2) 48 (1219.2) 48 (1219.2) 1 (726) Fixed 48 (1219.2) 48 (1219.2) 48 (1219.2) 48 (1219.2) 1800 (817) Copyright Inc., 1. All Rights Reserved
12 Technical Data Page 12 Effective: March 1 Notes TD15A12TE Printed in U..A. / Z00631
Transfer switch OTEC and OTECSE open transition
Specification sheet OTEC and OTECSE open transition 125-600 Amp Description OTEC transfer es are designed for operation and ing of electrical loads between primary power and standby generator sets. They
More informationOTEC Transfer switch open transition
Specification sheet OTEC Transfer switch open transition 40 1200 amp Description OTEC transfer switches are designed for operation and switching of electrical loads between primary power and Standby generator
More informationwww. ElectricalPartManuals. com Systems Pow-R Breaker Transfer Switches Technical Data Page 1
Cl November 1984 New Information Mailed to: E, D, C/29-900A Westinghouse Electric Corporation Distribution and Protection Business Unit Commercial Division - Assemblies London, KY 407 41 Technical Data
More informationTransfer switch OTEC open or delayed transition
Transfer switch OTEC open or delayed transition 40-1000 Amp Description OTEC transfer switches are designed for operation and switching of electrical loads between primary power and standby generator sets.
More informationTransfer switch GTEC open or delayed transition
Transfer switch GTEC open or delayed transition 40-1250 Amp Description The GTEC automatic transfer switch combines reliability and flexibility in a small, economical package for transferring loads between
More informationOTPC-SE Service entrance transfer switch open transition
Specification sheet OTPC-SE Service entrance transfer switch open transition 40 1000 amp Description OTPC service entrance transfer switches are designed for operation and switching of electrical loads
More informationTransfer switch OHPC open or delayed transition
Specification sheet Transfer switch OHPC open or delayed transition 125-800 Amp Description The Cummins Series OHPC PowerCommand automatic transfer switch monitors the primary power source, signals the
More informationZenith ZTGSE/ZTGDSE. GE Energy Digital Energy. Service Entrance Rated Automatic Transfer Switches. Introduction. Features and Benefits
GE Energy Digital Energy Zenith ZTGSE/ZTGDSE Service Entrance Rated Automatic Transfer Switches Introduction While providing the functionality of an automatic transfer switch (ATS), GE s Zenith ZTGSE Series
More informationGTEC Transfer switch Open transition
GTE Transfer switch Open transition 40-2000 amp Description GTE transfer switches combine reliability and flexibility in a small, economical package for transferring loads between a utility and a generator
More informationBTPC Bypass isolation transfer switch open or closed transition
Specification sheet BTPC Bypass isolation transfer switch open or closed transition 150 4000 amps Description BTPC bypass isolation transfer switches combine a drawout automatic transfer switch with isolation
More informationCHPC Transfer switch closed transition
Specification sheet CHPC Transfer switch closed transition 125-800 Amp Description The Cummins series CHPC PowerCommand automatic transfer switch monitors the primary power source, signals the generator
More informationTransfer switch OTPC open, closed, or delayed transition
Transfer switch OTPC open, closed, or delayed transition 40-4000 Amp Description OTPC transfer switches are designed for operation and switching of electrical loads between primary power and standby generator
More informationMP7650 CONTROLLER. Lake-Shore-Electric.com MP7650 Controller STANDARD FEATURES 1.0 INTRODUCTION
STANDARD FEATURES 1.0 INTRODUCTION The LSEC MP7650 is a sophisticated state of the art, microprocessor based controller. It consists of five major parts: a Power Supply board, a Relay Interface Board,
More informationASCO Low Voltage Automatic Transfer Switch Systems
ASCO Low Voltage Automatic Transfer Switch Systems Suitable for Emergency, Peak and Prime Power System Applications ASCO s experience and commitment to excellence in designing and building Emergency Power
More informationBypass/Isolation Switches RTS-03 SERIES
Bypass/Isolation Switches RTS-0 SERIES RTS-0 Series Automatic Transfer Switches with Manual Bypass The Industry s Highest -Cycle Closing and Withstand Ratings A Russelectric RTS-0 Series transfer switches
More informationGTEC Transfer switch open transition
GTEC Transfer switch open transition 40 2000 amp Description GTEC transfer switches combine reliability and flexibility in a small, economical package for transferring loads between a utility and a generator
More informationTS880 AUTOMATIC TRANSFER SWITCHES
TS 880-1200 AMP TRANSFER SWITCH TS 880-2500 AMP TRANSFER SWITCH Model Series TS 880 100-000 Amp TS880 AUTOMATIC TRANSFER SWITCHES THOMSON TECHNOLOGY TS 880 AUTOMATIC TRANSFER SWITCHES OFFER THE FOLLOWING
More informationLow Voltage Automatic Transfer Switch Systems
Suitable for Emergency, Peak and Prime Power System Applications Low Voltage Automatic Transfer Switch Systems THE POWER AUTHORITY THE POWER AUTHORITY ASCO s experience and commitment to excellence in
More informationHorizontal Circuit Switchers
> Transformer Protection > CIRCUIT SWITCHERS C A T A L O G B U L L E T I N General Application Southern States Types CSH and CSH-B Horizontal Circuit Switchers provide an economical, versatile, space saving
More informationDESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5
DESIGN GUIDELINES LOW VOLTAGE SWITCHGEAR PAGE 1 of 5 1.1. APPLICABLE PUBLICATIONS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements, and errata), form a part of this
More informationHorizontal Circuit Switchers
> Transformer Protection > CIRCUIT SWITCHERS C A T A L O G B U L L E T I N General Application Southern States Types CSH and CSH-B Horizontal Circuit Switchers provide an economical, versatile, space saving
More informationO & M Manual for ATC-300/ A (480/600Vac) 3-Position Contactor Based Transfer Switch
O & M Manual for ATC-300/900 40-400A (480/600Vac) 3-Position Contactor Based Transfer Switch Instruction Booklet Description Page Introduction.................................. 2 Receiving, Handling, and
More informationO & M Manual for ATC A (480/600Vac) ATC Position Contactor Based Transfer Switch
O & M Manual for ATC-300+ 40-400A (480/600Vac) ATC-300+ 3-Position Description Page Introduction.................................. 2 Receiving, Handling, and Storage................... 6 Equipment Description...........................
More informationService Entrance Methods
Service Section Typical switchboards consist of a service section, also referred to as the main section, and one or more distribution sections. The service section can be fed directly from the utility
More informationO & M Manual for 1600A (480 Vac) ATC-300+/900 & Non-Automatic, 3-Position Fixed Mount Contactor Based Transfer Switch
O & M Manual for 1600A (480 Vac) ATC-300+/900 & Non-Automatic, 3-Position Fixed Mount Contactor Based Transfer Switch Instruction Booklet Description Page Introduction..................................
More informationBypass/Isolation Switches RTS-30 SERIES
Bypass/Isolation Switches RTS-0 SERIES RTS-0 Series Automatic Transfer Switches with Manual Bypass Industry s Most Comprehensive Line of UL Tested 0-Cycle Automatic Transfer Switches A Russelectric RTS-0
More informationModel ESV Uninterruptible Power System 1.5 KVA/KW KVA/KW Single Phase
Model ESV Uninterruptible Power System 1.5 KVA/KW - 14.0 KVA/KW Single Phase 1.0 General General Specification This specification describes the features and design of an on-line, dual conversion, uninterruptible
More informationO & M Manual for A (480/600 Vac) ATC Position Contactor Based Transfer Switch
O & M Manual for 40-1200A (480/600 Vac) ATC-300 3-Position Contactor Based Transfer Switch Instruction Booklet Description Page Introduction.................................. 2 Receiving, Handling, and
More informationDefender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications
Defender Mini Online Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. The Defender Mini CLI specification describes a single phase, online, solid state Lighting
More informationSECTION MOTOR CONTROLLERS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 29 11 SPEC WRITER NOTE: Use this section only for NCA projects. Delete between // ---- // if not applicable to project. Also, delete any other item or paragraph
More informationDiesel generator set C17D5T series
Specification sheet Diesel generator set C17D5T series 17 @ 50 Hz Description This Cummins commercial generator set is a fully integrated power generation system, providing optimum performance, reliability,
More informationO & M Manual for A (480/600 Vac) ATC-300+/ATC Position Contactor Based Transfer Switch
O & M Manual for 40-1200A (480/600 Vac) ATC-300+/ATC-900 Instruction Booklet Description Page Introduction.................................. 2 Receiving, Handling, and Storage................... 5 Equipment
More informationSECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters
More informationFortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications
Fortress 1 Outdoor Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a single phase, on-line, double conversion, solid state
More informationO & M Manual for the ATC-100 Breaker Based Transfer Switch
ATC-100 Breaker Based Transfer Switch Instructional Booklet Description Page 1. Introduction............................... 2 2. Receiving, Handling, and Storage................ 6 3. Equipment Description........................
More informationMedium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Introduction Product Selection Guide....................................2 Medium Voltage Switch MVS Product Description......................................
More informationPower Lynx 3 Uninterruptible Power System (UPS) Technical Specifications
Power Lynx 3 Uninterruptible Power System (UPS) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Uninterruptible
More informationO & M Manual for A ATC-300+/800 Contactor Open/Closed Transition Fixed/Dual Drawout Bypass Isolation Transfer Switch Instruction Booklet (412)
O & M Manual for 100-1600A ATC-300+/800 Contactor Open/Closed Transition Fixed/Dual Drawout Bypass Isolation Transfer Switch Instruction Booklet (412) Description Page Introduction....................................
More informationSERIES TS AMP AUTOMATIC TRANSFER SWITCHES
SERIES TS 880 800-4000 AMP AUTOMATIC TRANSFER SWITCHES M I S S I O N C R I T I C A L, I N D U ST R I A L THOMSON POWER SYSTEMS TS 880 AUTOMATIC TRANSFER SWITCHES OFFER THE FOLLOWING: ENCLOSED CONTACT POWER
More informationOTPC Transfer switch open and closed transition
Specification sheet OTPC Transfer switch open and closed transition 125-800 Amp Description OTPC transfer switches are designed for operation and switching of electrical loads between primary power and
More informationQuick Start Guide TS 910 & TS 920
Quick Start Guide TS 910 & TS 920 DANGER HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH Read and understand this quick start guide before installing and operating the transfer switch The installer
More informationSERIES TS AMP AUTOMATIC TRANSFER SWITCHES
SERIES TS 840 100-800 AMP AUTOMATIC TRANSFER SWITCHES AG R I C U LT U R A L THOMSON POWER SYSTEMS TS 840 AUTOMATIC TRANSFER SWITCHES OFFER THE FOLLOWING: ENCLOSED CONTACT POWER SWITCHING UNITS Fully enclosed
More informationMedium Voltage Standby non-paralleling Control GUIDE FORM SPECIFICATION
Medium Voltage Standby non-paralleling Control 1. GENERAL GUIDE FORM SPECIFICATION A. The requirements of the contract, Division 1, and part 16 apply to work in this section. 1.01 SECTIONS INCLUDE A. Medium
More informationCobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications
Cobra 3 Stand-By Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a stand-by, three-phase, solid state Lighting Inverter System
More informationQuick Start Guide TS 910
Quick Start Guide TS 910 DANGER HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH Read and understand this quick start guide before installing and operating the transfer switch The installer is responsible
More informationSERIES TS AMP AUTOMATIC TRANSFER SWITCHES
SERIES TS 870 100-1200 AMP AUTOMATIC TRANSFER SWITCHES C O M M E R C I A L & I N D U ST R I A L THOMSON POWER SYSTEMS TS 870 AUTOMATIC TRANSFER SWITCHES OFFER THE FOLLOWING: ENCLOSED CONTACT POWER SWITCHING
More informationParalleling Equipment
Paralleling Equipment PowerCommand Model 300 Digital Master Control Description The PowerCommand TM Digital MasterControl is a microprocessor-based paralleling system component, designed to directly interface
More informationCONTROLLIX CORPORATION CONTROLLIX.COM LOW VOLTAGE AUTOMATIC SWITCH CAPACITOR BANK SPECIFICATIONS
LOW VOLTAGE AUTOMATIC SWITCH CAPACITOR BANK SPECIFICATIONS I. SCOPE a. This specification describes the necessary requirements for the design, fabrication, and operation of automatically switched, low
More informationA system fault contribution of 750 mva shall be used when determining the required interrupting rating for unit substation equipment.
General Unit substations shall be 500 kva minimum, 1500 kva maximum unless approved otherwise by the University. For the required configuration of University substations see Standard Electrical Detail
More informationCutler-Hammer I.B. ATS-G003. Instructions for Cutler-Hammer Genswitch Automatic Transfer Switch ( Amperes)
Cutler-Hammer I.B. ATS-G003 Instructions for Cutler-Hammer Genswitch Automatic Transfer Switch (30-1000 Amperes) Effective December, 1998 Supersedes I.B. ATS-G002 dated October, 1996 I.B. ATS-G003 Page
More information1. The term "withstand" means "the unit will remain in place without separation of any parts from the device when subjected to the seismic forces.
SECTION 262816 - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fusible switches. 2. Nonfusible switches. 3. Receptacle switches. 4. Shunt trip switches. 5.
More informationSPECIAL SPECIFICATION 5066 Packaged Engine Generator System
2004 Specifications CSJ 2121-04-072 SPECIAL SPECIFICATION 5066 Packaged Engine Generator System 1. Description. Furnish and install packaged engine generator system complete with transfer switch and service
More informationExperience, innovation and reliability
Disconnect-based automatic transfer switches Experience, innovation and reliability Built with years of experience Powered with innovation Delivered with reliability A history of experience, innovation
More informationFor more information visit:
O & M Manual for up to 400 amps (600 Vac Max) ATC-300+/ATC-900 Contactor Open/Closed Transition Fixed and Dual Drawout Bypass Isolation Automatic Transfer Switch Instruction Booklet Description Page Introduction....................................
More informationOwner s Manual. Series 165 Automatic Transfer Switches rated 100 and 200 amps, single phase, 240 V ac for automatic 2 wire start generators
Owner s Manual Series 165 Automatic Transfer Switches rated 100 and 200 amps, single phase, 240 V ac for automatic 2 wire start generators DANGER is used in this manual to warn of risk of electrical shock
More informationFlorham Park, NJ USA Call (ASCO) for sales or service
Operator s Manual 7000 Series ATS Automatic Transfer Switches D design, 30 through 230 A DANGER is used in this manual to warn of a hazard situation which, if not avoided, will result in death or serious
More informationSection SWITCHBOARDS. Introduction. Part 1 - General. Related Work
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Related Work Section 16070 Seismic Anchorage and Restraint Section 16075 Electrical Identification Section 16080 Power Distribution Acceptance
More informationA. Work Included: Provide low voltage switchboard work as shown, scheduled, indicated, and as specified.
SECTION 26 24 13 LOW VOLTAGE SWITCHBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More informationCutler-Hammer IB E. O & M Manual for the Cutler-Hammer ATC-400 Controlled AGswitch
Cutler-Hammer IB01602005E O & M Manual for the Cutler-Hammer ATC-400 Controlled AGswitch Effective November 2002 IB01602005E Page iii! WARNING READ AND UNDERSTAND THE INSTRUCTIONS CONTAINED HEREINAFTER
More informationZenith ZBTS/ ZBTSD/ZBTSCT
Critical Power from GE Zenith ZBTS/ ZBTSD/ZBTSCT Transfer/Bypass-Isolation Transfer Switches Introduction GE s Zenith ZBTS Series Bypass Isolation Transfer Switch consists of two major modules the automatic
More informationATyS d M Remotely operated Transfer Switching Equipment from 40 to 160 A
ATyS d M Remotely operated Transfer Switching Equipment Transfer switches new The solution for > Applications with an external ATS/AMF controller > Building Management Systems (BMS) atys-md_002_b_1_cat
More informationFortress 3 Harsh. Harsh Environment. Emergency Central Lighting Inverter (CLI) Technical Specifications
Fortress 3 Harsh Emergency Central Lighting Inverter (CLI) Technical Specifications PART 1 GENERAL 1.1 SUMMARY A. This specification describes a three phase, on-line, double conversion, solid state Lighting
More informationDIESEL Engine Fire Pump Controllers Features
1-1 Printer / Recorder The industrial grade thermal printer is housed in a rugged steel enclosure within the controller. The on/off switch, feed and reset buttons are front accessible. A bi-color status
More informationUniversity of Houston Master Construction Specifications Insert Project Name SECTION ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL
SECTION 23 04 10 ELECTRONIC VARIABLE SPEED DRIVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationStandby Power Systems
Source: Power Quality in Electrical Systems Chapter 13 Standby Power Systems The term standby power systems describes the equipment interposed between the utility power source and the electrical load to
More informationBolted contact switches. Pringle switches
Bolted contact switches Pringle switches Eaton s Pringle bolted contact switches History Eaton s PringleT switches have helped pioneer the development of high-quality electrical products for commercial
More informationdesign prefix 50 Hanover Road, Florham Park, New Jersey USA (ASCO), for service call (ASCO)
Owner s Manual Series 165P Power Transfer Load Center 125 amps, 1 phase, 240 V ac, 12 or 20 load spaces for automatic 2 wire start generators DANGER is used in this manual to warn of risk of electrical
More informationSwitchgear. Low Voltage
January 2001 Vol. 1, Ref. No. [0923] -1 Low Voltage Switchgear Contents Description Page Magnum DS Metal-Enclosed Product Description........................................... -2 Application Description........................................
More informationA. Submit manufacturer's literature and technical data before starting work.
SECTION 16425 SWITCHBOARD PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 16450 - Grounding. 1.02 SUBMITTALS A. Submit manufacturer's literature and technical data before starting work. B. Submit Shop
More information2018 Consultant s Handbook Division 26 Electrical 2413 Switchboards
1 General 1.1 Switchboards shall be U.L. listed and labeled. 1.2 Each switchboard shall have its own main disconnecting means unless it is located in the same room as its source of origin. In most cases
More informationFused Coordination Panelboard
Fused Coordination Panelboard SOLUTIONS GUIDE SOLUTIONS GUIDE Branch Circuit Protection Introducing Mersen s Fused Coordination Panelboard Selective Coordination is required in several locations as defined
More informationsection-page Table 1. Transfer switching device ratings. Conditional short circuit current
Operator s Manual 7000 Series ATS Automatic Transfer Switching Equipment D design 30 through 200 amperes TABLE OF CONTENTS section-page INSTALLATION... 1-1 Enclosures and Mounting... 1-1 Power Connections...
More informationATLV MaxSG. Low Voltage Metal Enclosed Switchgear
ATLV MaxSG Low Voltage Metal Enclosed Switchgear ABB, INC. Product General Description MaxSG Switchgear ABB MaxSG switchgear is a further continuation in the development of innovative products from ABB,
More informationTRI-SERVICE ELECTRICAL WORKING GROUP (TSEWG) 03/05/09 TSEWG TP-11: UFC N BEST PRACTICES
TSEWG TP-11: UFC 3-500-10N BEST PRACTICES UFC 3-500-10N was developed by NAVFAC and was used as the starting point for the tri-services development of UFC 3-500-10, Design: Electrical Engineering. UFC
More informationSECTION MOTOR CONTROLLERS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 29 11 MOTOR CONTROLLERS SPEC WRITER NOTE: Delete between // ---- // if not applicable to project. Also, delete any other item or paragraph not applicable to
More informationI.L T.K. Instructions for Cutler-Hammer MP1 Series Automatic Transfer Switches A
I.L.15.01.T.K. Instructions for Cutler-Hammer MP1 Series Automatic Transfer Switches 30-1200A I.L.15.01.T.K. Page i Table of Contents 1. WARRANTY... 1 2. RECEIVING, HANDLING AND STORAGE... 1 2.1 RECEIVING...
More informationGE 8000-Line Motor Control Centers Mains, Feeders, Incoming Lines C-1
GE 8000-Line -1 Mains, coming Lines MAINS GENERAL Main units consist of an externally operable circuit disconnect, either a fusible switch or a circuit breaker. Sizes by ampere rating, short-circuit rating,
More informationMedium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Medium Voltage Switch MVS Product Description............................................. 2 Application Description..........................................
More informationCutler-Hammer. Installation Instructions for the Digitrip OPTIM Pole Trip Unit Installation and Operation with L-Frame Series C Circuit Breakers
Cutler-Hammer Installation Instructions for the Digitrip OPTIM 550 3-Pole Trip Unit Installation and Operation with L-Frame Series C Circuit Breakers Table of Contents Description Page 1.0 General Information......................1
More informationIN2 Enclosed Switches and Circuit Breakers
Illinois Math and Science Academy DigitalCommons@IMSA Project Manuals IN2 2015 IN2 Enclosed Switches and Circuit Breakers Illinois Mathematics and Science Academy Follow this and additional works at: http://digitalcommons.imsa.edu/facility_in2_manuals
More informationPower Break II Switchboard
Power Break II Switchboard Now available with PowerBreak II Circuit Breakers through 4000A GE s Power Break II Switchboard is now available with the new Power Break II Insulated Case Circuit Breaker (800A
More informationOperator Manual. Transfer Switch. RSS100 and RSS Cummins Inc. All rights reserved. English
Operator Manual Transfer Switch RSS100 and RSS200 English 8-2007 962 0134 Table of Contents SECTION TITLE PAGE SAFETY PRECAUTIONS................................................... ii 1. INTRODUCTION.........................................................
More informationStandby Power Systems Considerations
Standby Power Systems Considerations TVSFPE Chapter Meeting Ken Cockerham Nixon Power Services Company March 14, 2013 Radiator Basic Engine Generator Set Exhaust Outlet Turbo Charger Converts Mechanical
More informationSECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 26 28 16 ENCLOSED SWITCHES AND PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following individually mounted, enclosed switches and circuit breakers rated 600V AC and less: 1. Fusible switches.
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 26 13 13 MEDIUM VOLTAGE SWITCHGEAR PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More informationNORTH CAROLINA SHERIFFS ASSOCIATION
NORTH CAROLINA SHERIFFS ASSOCIATION Name of Dealership Type of Vehicle Zone 600 AMP AUTOMATIC TRANSFER SWITCH (Specification #07) Base Unit Price 207 ASCO AC600 Appalachia -- NB -- 207 ASCO AC600 Dogwood
More informationData Bulletin. Ground-Censor Ground-Fault Protection System Type GC Class 931
Data Bulletin 0931DB0101 July 2001 Cedar Rapids, IA, USA Ground-Censor Ground-Fault Protection System Type GC Class 931 09313063 GT Sensor Shunt Trip of Circuit Interrupter Window Area for Conductors GC
More informationMANUAL ELECTRIC FIRE PUMP CONTROLLERS METRON SERIES M450
MANUAL ELECTRIC FIRE PUMP CONTROLLERS METRON SERIES M450 TABLE OF CONTENTS PART I GENERAL DESCRIPTION... PAGE 2 PART II FUNCTIONS... PAGE 2 PART III INSTALLATION... PAGE 3 PART IV INITIAL INSTALLATION
More informationwww. ElectricalPartManuals. com Section 13 Switchgear Low Voltage
Switchgear Low Voltage Introduction...13-1 AKD-10 Low-Voltage Switchgear...13-3 AKD-20 Low-Voltage Switchgear...13-3 Low Voltage Switchgear GE low-voltage switchgear is heavy-duty equipment built to ANSI
More informationAUTO-EC-3-E-PLC Electric Filter Backwash Controller Operation & Maintenance Manual
AUTOEC3EPLC Electric Filter Backwash Controller Operation & Maintenance Manual Contents Contents Controller Basics 3 Controller Components 4 Screen Flow Diagram Controller Functions 6 Installation 7 Warranty
More informationBussmann series Quik-Spec Coordination Panelboard
Quik-Spec electrical gear 12 Contents Bussmann series Quik-Spec Coordination Panelboard Section page Description Quik-Spec Coordination Panelboards Up to 400 A 2 600 to 1200 A 3 Quik-Spec elevator disconnects
More informationOperator s Manual Series ACTS Automatic Closed Transition Transfer Switches 150 through 4000 amps A. Rating Label.
Operator s Manual 7000 Series ACTS Automatic Closed Transition es 150 through 4000 amps TABLE OF CONTENTS section-page INSTALLATION... 1-1 Mounting and Line Connections... 1-1 Auxiliary Circuits and Harness...
More informationTransfer switch OT III open or delayed transition, non-automatic
Specification sheet Transfer switch OT III open or delayed transition, non-automatic 40 1000 amp Description The Cummins OTIII non-automatic transfer switch offers flexibility when remote controlled or
More informationME Switchgear with Vacuum Circuit Breaker and Auto-jet II Switch with Ground Position
LET S BE PACIFIC November 0 Volume Number 5 ME Switchgear with Vacuum Circuit Breaker and Auto-jet II Switch with Ground Position Federal Pacific has the capability to engineer, fabricate and assemble
More informationFlorham Park, NJ USA Call (ASCO) for sales or service
Operator s Manual 4000 Series ATS Automatic Open-Transition Transfer Switches D design 30 230A, J design 260 600A, H-design 800 1200A, G-design 1600 4000A, F-design 4000A DANGER is used in this manual
More informationmodel ps600 Address all communications and shipments to: FEDERAL SIGNAL CORPORATION
MODEL: PS600 HZ: 60 A model ps600 installation and service manual for federal model ps600 FEDERAL SIGNAL CORPORATION POWER SUPPLY VOLTS: SERIES: 120VAC FEDERAL SIGNAL CORPORATION UNIVERSITY PARK, IL. U.S.A.
More informationZenith ZTX. GE Energy Digital Energy. Automatic Transfer Switch
GE Energy Digital Energy Zenith ZTX Automatic Transfer Switch GE s Zenith ZTX Series Automatic Transfer Switches are designed for residential and light commercial critical/ non-life safety applications
More informationEON Model EL3 Three Phase Centralized Emergency Lighting Inverter. General Specification 10KW 33KW Systems
EON Model EL3 Three Phase Centralized Emergency Lighting Inverter General Specification 10KW 33KW Systems 1.0 GENERAL This specification defines the electrical and mechanical characteristics and requirements
More informationLow Voltage Switchgear Type WL Low Voltage Metal-Enclosed Switchgear
13 Low Voltage Switchgear Siemens Type WL low voltage metal-enclosed switchgear is designed, constructed and tested to provide superior power distribution, power monitoring and control. At the heart of
More informationBussmann series Quik-Spec Power Module Switch elevator disconnect
Supersedes January 2016 Agency information UL 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262 culus, NEMA 1, UL 50, Listed enclosure cul per Canadian Standards C22.2, No. 0-M91-CAN/
More information