Revision #: 14.4 Document #: Page: 1 of 5 Title: Mobile Aerial Work Platforms

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Revision #: 14.4 Document #: Page: 1 of 5 Title: Mobile Aerial Work Platforms"

Transcription

1 Revision #: 14.4 Document #: Page: 1 of 5 1. PURPOSE The purpose of this procedure is to provide guidance on the safe use of mobile aerial work platforms. 2. SCOPE This procedure applies to all employees and contractors working at the BASF Corporation Kankakee facility. Contractors and sub-contractors are not authorized to operate BASF aerial work platforms, and must also meet the specific requirements of the following sections within their companies EHS or Maintenance program; Section 7.1, Inspection and Maintenance, 1. Section 7.1, Inspection and Maintenance, 4. Section 7.6, Training. 3. RESPONSIBILITY Person Responsible Responsibility Facility Personnel Follow the requirements documented in this procedure when working with mobile aerial work platforms Maintenance Department Maintain a roster of employees qualified to use the aerial work platforms. Maintain completed Form and Form Aerial Platform Checklists for two months. Upon notification of defects, immediately remove the aerial platform from service until it is repaired. Conduct initial and tri-annual training on use of the mobile aerial work platforms for operators of the equipment. 4. SAFETY MEASURES 4.1 N/A 5. MATERIAL AND EQUIPMENT 5.1 N/A 6. DEFINITIONS 6.1 Red Tag - Tag attached to a piece of equipment indicating that it has failed an inspection and is not to be used until repairs are completed.

2 Revision #: 14.4 Document #: Page: 2 of 5 7. PROCEDURE The following tables contain guidance for the safe use and care of mobile aerial work platforms: 7.1 Inspection and Maintenance 1 Complete the appropriate Form or Aerial Platform Checklist at the start of each shift that the particular lift is to be used. Each form can be used for a 24-hour period. When more than one operator uses the aerial platform during a shift, the first operator will be designated by the Supervisor to fill out the checklist at the start of the shift. Display the checklist on the platform in a plastic envelope. The Maintenance Department maintains the completed checklists for two months. 2 Report all defects immediately to the Maintenance Supervisor responsible, shut down the aerial platform until the defects are repaired, and apply a red tag to the operating controls. 3 Ensure that instructions and warning placards are legible. 4 Required repairs of the equipment will be coordinated through the Maintenance Department. 7.2 General Requirements 1 Do not operate an aerial platform. Unless you have received aerial platform training (provided initially and every 3 years). During an electrical storm. At a maximum wind speed of 28 mph and above unless the manufacturer recommends a lower wind speed to aerial platform operation. When wind conditions cause the platform to be unstable as determined by the aerial platform operator. 2 Close and secure all access panels and the gate before the aerial platform is driven. 3 Enter or leave the platform only through the platform gate. 4 Ensure that the floor of the platform is free of debris before operation and after work is completed. 5 Wear a safety harness with a lanyard attached when riding in or working from the platform. Secure it to the attachment bar on the platform. 6 Position feet firmly on the floor of the platform when riding in or working from the platform. 7 Do not exceed the lift capacity printed on the decal of the aerial platform. Consider the weight of all materials, tools, and personnel in the platform as part of the load. 8 Chock the rear wheels of the aerial platform when the machine is parked and not in use.

3 Revision #: 14.4 Document #: Page: 3 of Operation and Use 1 Operate machine controls very carefully and smoothly. Never slam controls or allow controls to snap. When changing direction, return the control lever to neutral, stop, and then proceed. Drive the aerial platform with the platform and boom extended over the rear axle. The steering and drive controls are reversed if the platform is over the front axle. Use reverse traveling for work site mobility only. Be alert at all times for pedestrians. 2 Always park the equipment on a firm, level surface. 3 Observe all traffic regulations. Do not engage in horseplay. 4 Use orange cones, caution tape, or other warning devices to secure the working area from the following (see attachment and for guidance); Casual entry. Railroad switching. Any other operation which might endanger the safety of personnel. 5 Check for clearances each time the aerial platform is moved or elevated. Do not use the drive control to maneuver the machine closer than six feet of an obstacle. Use the telescope or swing controls for close maneuvering. Post a lookout when the operator's view is obstructed. Maintain a distance of 10 feet from electrical power lines. Maintain a safe distance of 15 feet between other vehicles. 6 Do not stand on ladders, boxes, barrels, the guardrail or anything else to extend reach. 7 Do not use the boom as a "jack" to push other objects or as a crane. 8 Never attach wire, cable, or any similar items to the platform while moving. 9 Turn off the engine before the operator leaves the platform. 7.4 Refueling 1 Do not refuel the aerial platform during an electrical storm. 2 Only refuel the aerial platform while the ignition is turned off. 7.5 Emergency Situations 1 Operate the aerial platform on the auxiliary power system if power is lost during operation. This system is operated from the platform. Use the auxiliary power only to get the operator to ground level. 2 The ground controls override all platform controls. Use ground controls only if the operator has consented or in case of emergency. 3 Open the "telescope in" valve located on the main pivot to move the telescope in and the "boom down" valve located on the hydraulic manifold to lower the boom.

4 Revision #: 14.4 Document #: Page: 4 of 5 4 Never operate ground controls while an operator is in the platform unless the operator has consented or in an emergency. 7.6 Training All persons operating powered mobile platforms must be properly trained and licensed in the use and operation of this equipment Training Content Training shall be specific and in addition to any other vehicle operating training. All operator training and evaluation shall be conducted by persons who have the knowledge, training, and experience to train powered mobile platform operators and evaluate their competence Refresher Training and Evaluation Refresher training in relevant topics shall be provided to the operator when: The operator has been observed to operate the vehicle in an unsafe manner The operator has been involved in an accident or near-miss incident The operator is assigned to operate a different type of powered mobile platform, or A condition in the workplace changes in a manner that could affect the safe operation of the powered mobile platform Frequency of Evaluation An evaluation of each Powered Mobile Platform Operator s performance shall be conducted at least once every three years for relicensing Documentation Documentation of initial training and subsequent training must be maintained for each licensed operator Audit/Inspection Procedures are audited/inspected periodically as a part of the facility s EHS Procedure Review and Audit Committee activity Records Retention Record Retention Time Maintained By List of qualified operators to include initial qualification/requalification dates. Until superceded by updated list. Maintenance Department Completed Form and Form Aerial Platform Checklist Two months 8. APPENDICES/FORMS 8.1 N/A 9. REFERENCES/SOP S 9.1 OSHA BC Powered Mobile Platforms

5 Revision #: 14.4 Document #: Page: 5 of REVISION HISTORY PROCEDURE HISTORY Revision Reason Initiator Date No. 0No. New procedure D. Deighton 04/22/94 1 Procedure Update / Revision D. Deighton 10/21/94 2 Procedure Update / Revision D. Deighton 08/01/95 3 New procedure number and minor revisions to M. Newell 01/07/03 include checklists. 4 Change in location of maintenance M. Newell 10/22/03 documentation. 5 Format changes, clarification to scope added P. Snapp 02/06/09 drawings ( , ) to clarify barricading requirement. 6 Clarified scope D. Butler 08/22/ Added 7.0 References and 8.0 training D. Butler 07/01/2013 requirements to comply with corporate standard 14.4 Clarification in 5.2 regarding wind and wind speeds. Updated the company logo, updated the document format to the new site standard. Corrected the revision number to match the system. B. Walker J. Zippelius 7/17/2017 7/26/2017

AERIAL LIFTS/MAN-LIFTS

AERIAL LIFTS/MAN-LIFTS AERIAL LIFTS/MAN-LIFTS Aerial lifts are pieces of equipment that many workers can't imagine working without. This equipment, if used correctly, provides quick and safe access to work areas that at one

More information

RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM

RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM 9/01 1 TABLE OF CONTENTS POWERED INDUSTRIAL TRUCK PROGRAM A. PURPOSE AND SCOPE...1 B. LIFE TRUCK REQUIREMENTS...1 C. AREA REQUIREMENTS...2 D. RESPONSIBILITIES...2

More information

UC Irvine Environmental Health & Safety SECTION: TITLE: Powered Industrial Truck (Forklift) Safety Program

UC Irvine Environmental Health & Safety SECTION: TITLE: Powered Industrial Truck (Forklift) Safety Program UC Irvine Environmental Health & Safety SECTION: TITLE: Powered Industrial Truck (Forklift) Safety Program INITIATOR: Desirée Villarreal REVISION DATE: 10/17/2014 1. Program Description 2. Scope 3. Definitions

More information

Industrial Truck (Forklift) Safety Program

Industrial Truck (Forklift) Safety Program University of North Carolina Wilmington Environmental Health & Safety Workplace Safety Industrial Truck (Forklift) Safety Program GENERAL The UNCW Environmental Health & Safety Department (EH&S) is authorized

More information

This lift will not operate with the generator engaged.

This lift will not operate with the generator engaged. WARNING 40' GENIE S40 PERSONNEL BOOM LIFT Any piece of equipment can be dangerous if not operated properly. YOU are responsible for the safe operation of this equipment. The operator must carefully read

More information

!!! Sample Written Program For Your Company! For! Forklift Safety!! Provided By: !!!

!!! Sample Written Program For Your Company! For! Forklift Safety!! Provided By: !!! Sample Written Program For Your Company For Forklift Safety Provided By: P.O. Box 2136 Slidell, LA 70458 Phone: 985-781-1444 Fax: 985-718-4957 Email: info@se-safety.com Forklift & Motorized Pallet Jack

More information

POWERED INDUSTRIAL TRUCK PROGRAM September 2015

POWERED INDUSTRIAL TRUCK PROGRAM September 2015 A. SCOPE AND APPLICATION POWERED INDUSTRIAL TRUCK PROGRAM September 2015 The Powered Industrial Truck Program is established in accordance with 29 CFR 1910.178, Powered Industrial Trucks, and describes

More information

Management Plan for Aerial Lifts (ANSI/SLA ) ISD #535

Management Plan for Aerial Lifts (ANSI/SLA ) ISD #535 Management Plan for Aerial Lifts (ANSI/SLA 92.3-1990 1926.453) ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9½ Street Rochester, MN 55904 507-328-4507 Modification Date Document Modification

More information

Forklift and Industrial Trucks

Forklift and Industrial Trucks Forklift and Industrial Trucks University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells 1.0 Program Objective This program for

More information

SAINT MARY S COLLEGE OF CALIFORNIA STANDARD POWERED INDUSTRIAL TRUCK OPERATION. Prepared by

SAINT MARY S COLLEGE OF CALIFORNIA STANDARD POWERED INDUSTRIAL TRUCK OPERATION. Prepared by SAINT MARY S COLLEGE OF CALIFORNIA STANDARD 1.1.1 POWERED INDUSTRIAL TRUCK OPERATION Prepared by SAINT MARY S COLLEGE OF CA MORAGA, California KAREN LAURICELLA Original Date: 22 MAY, 2003 Effectivity:

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual First Edition Ninth Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Third Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Technical Publications AWP. Operator's Manual. Fourth Edition, First Printing Part No

Technical Publications AWP. Operator's Manual. Fourth Edition, First Printing Part No Technical Publications AWP Operator's Manual Fourth Edition, First Printing Part No. 424 Operator s Manual Fourth Edition Important Read, understand and obey these safety rules and operating instructions

More information

UNIVERSITY. MANITOBA PHYSICAL PLANT Aerial Work. Safe Work. Practice # Platform Operations

UNIVERSITY. MANITOBA PHYSICAL PLANT Aerial Work. Safe Work. Practice # Platform Operations UNIVERSITY OF MANITOBA PHYSICAL PLANT Aerial Work Safe Work Practice # Platform Operations 1.15.4 Edited by: pproved by: Created by: Created: Sept 2014 John Evinger M- Lloyd Peacock M - NIA W. Cory Sliworski

More information

Operator s Manual Z-45/25 Z-45/25J. DC Power Bi-Energy Power. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information

Operator s Manual Z-45/25 Z-45/25J. DC Power Bi-Energy Power. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information Operator s Manual Z-45/25 Z-45/25J DC Power Bi-Energy Power ANSI/CSA North America South America Asia AUS Australia with Maintenance Information Fourth Edition Second Printing Part No. 114344 Operator's

More information

PORTABLE LADDER SAFETY PROGRAM

PORTABLE LADDER SAFETY PROGRAM PORTABLE LADDER SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.25 Portable Wood Ladders* - 29 CFR 1910.26 Portable Metal Ladders* - 29 CFR 1926.1050-1060* *The above standards are intended to prescribe

More information

CRANE & HOIST SAFETY PROGRAM

CRANE & HOIST SAFETY PROGRAM CRANE & HOIST SAFETY PROGRAM 1.0 PURPOSE The purpose of the Crane and Hoist Safety Program is to: 1.1 Ensure a safe work environment for employees who operate, maintain, or work around cranes and hoists

More information

DUQUESNE UNIVERSITY FORKLIFT SAFETY PROGRAM

DUQUESNE UNIVERSITY FORKLIFT SAFETY PROGRAM DUQUESNE UNIVERSITY FORKLIFT SAFETY PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Driver Qualifications 1 Operator Training 2 Refresher Training 2 Evaluations

More information

Operation and Safety Manual TOUCAN 1210 TOUCAN 1310

Operation and Safety Manual TOUCAN 1210 TOUCAN 1310 Operation and Safety Manual TOUCAN 1210 TOUCAN 1310 English - Operator s & Safety Manual 31210028 November 23, 2006 FOREWORD FOREWORD This manual is a very important tool! Keep it with the machine at

More information

Operator s Manual. Z Z-45 25J IC Power. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information

Operator s Manual. Z Z-45 25J IC Power. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information Operator s Manual Z-45 25 Z-45 25J IC Power ANSI/CSA North America South America Asia AUS Australia with Maintenance Information Fourth Edition First Printing Part No. 114339 Operator's Manual Fourth Edition

More information

Work Platforms. Operators Manual Warning Stickers ANSI Standards. ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 )

Work Platforms. Operators Manual Warning Stickers ANSI Standards. ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 ) Work Platforms ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 ) Operators Manual Warning Stickers ANSI Standards Marv Haugen Enterprises 1851 Heartland Ave. 1851 Heartland

More information

Rig Move Hazard Mitigation Procedure

Rig Move Hazard Mitigation Procedure Page 1 Purpose This Department procedure defines the requirements for rig move pre-planning, detailed route assessments that identify hazards and mitigation steps, and safe rig move execution. Scope This

More information

First Edition Part No

First Edition Part No First Edition Part No. 28433 Operating Instruction Manual First Edition Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and

More information

FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Ladder Safety Policy

FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Ladder Safety Policy FACILITIES MANAGEMENT OFFICE OF ENVIRONMENTAL HEALTH AND SAFETY Ladder Safety Policy 11-21-2014 Last Revision 1.0 Intent: This intent of the Ladder Safety Program is to complement the University s Fall

More information

Genie North America. Important. Genie Europe. Contents

Genie North America. Important. Genie Europe. Contents Operator s Manual Sixth Edition Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted

More information

Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times.

Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times. Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times. Boom Lift Models 800A 800AJ S/N 0300183034 to Present ANSI 3121627 June 4, 2014 NOTE: This manual also

More information

Important. Contents. Contact us: Fifth Edition Third Printing. Operator's Manual

Important. Contents. Contact us: Fifth Edition Third Printing. Operator's Manual Fifth Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Sixth Edition First Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Powered Industrial Truck Operator. Kelley Edmier Safety Check, Inc. Jim Martinek, Josh Moore & Jacob Scott OSHA

Powered Industrial Truck Operator. Kelley Edmier Safety Check, Inc. Jim Martinek, Josh Moore & Jacob Scott OSHA Powered Industrial Truck Operator Training Kelley Edmier Safety Check, Inc. Jim Martinek, Josh Moore & Jacob Scott OSHA Powered Industrial Truck Operator Training Forklift Safety: An Operator Training

More information

29CFR 1910 Subpart D Walking-Working Surfaces Ladders

29CFR 1910 Subpart D Walking-Working Surfaces Ladders 29CFR 1910 Subpart D Walking-Working Surfaces 1910.23 Ladders The following provides some of the applicable definitions, in addition to, a brief checklist which provides guidance and information relating

More information

Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times.

Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times. Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times. Boom Lift Models 800S 860SJ S/N 0300182743 & B300001328 to Present ANSI 3121630 July 30, 2015 NOTE: This

More information

Operator s Manual S-60 S-65. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information

Operator s Manual S-60 S-65. ANSI/CSA North America South America Asia. AUS Australia. with Maintenance Information Operator s Manual S-60 S-65 ANSI/CSA North America South America Asia AUS Australia with Maintenance Information Fifth Edition First Printing Part No. 114305 Operator's Manual Fifth Edition First Printing

More information

Operation, Safety, and Maintenance Manual Original Instructions - Keep this manual with the machine at all times.

Operation, Safety, and Maintenance Manual Original Instructions - Keep this manual with the machine at all times. Operation, Safety, and Maintenance Manual Original Instructions - Keep this manual with the machine at all times. LIFTLUX Model 153-22 S/N 15676 to Present including S/N 12750 & 14132 P/N - 3121327 February

More information

Operation and Safety Manual

Operation and Safety Manual Operation and Safety Manual Model 80HX 80HX+6 P/N - 3120890 August 21, 2007 FOREWORD FOREWORD The purpose of this manual is to provide users with the operating procedures essential for the promotion of

More information

Operator s Manual. with Maintenance Information. Second Edition Second Printing Part No

Operator s Manual. with Maintenance Information. Second Edition Second Printing Part No Operator s Manual with Maintenance Information Second Edition Second Printing Part No. 82599 Operator's Manual Second Edition Second Printing Important Read, understand and obey these safety rules and

More information

Portable Ladder Program

Portable Ladder Program Portable Ladder Program Notice: Understand that this Portable Ladder Program was created solely for the purpose of portable ladders. There are different codes for fixed ladders design and construction

More information

Power Industrial Truck

Power Industrial Truck C L O V I S U N I F I E D S C H O O L D I S T R I C T Trans po rt a tio n De par tme nt Power Industrial Truck Utility Cart, Golf Cart, Forklift, etc. PIT Driver Handbook Revised May, 2013 1 P I T D R

More information

Hy-Brid Lifts HB-P827 HB-P1027 SERIES 1 MAINTENANCE & TROUBLESHOOTING PUSH-AROUND AERIAL WORK PLATFORM. Part NO. SUPO-670 May 2014

Hy-Brid Lifts HB-P827 HB-P1027 SERIES 1 MAINTENANCE & TROUBLESHOOTING PUSH-AROUND AERIAL WORK PLATFORM. Part NO. SUPO-670 May 2014 MAINTENANCE & TROUBLESHOOTING PUSH-AROUND AERIAL WORK PLATFORM Part NO. SUPO-670 May 2014 HB-P827 HB-P1027 SERIES 1 NOTES If there is a question about application and/or operation, contact: CUSTOM EQUIPMENT,

More information

CHAPTER 22 MOBILE ELEVATING WORK PLATFORMS 22 MOBILE ELEVATING WORK PLATFORMS. Basic Types. Scissor-Type Machines

CHAPTER 22 MOBILE ELEVATING WORK PLATFORMS 22 MOBILE ELEVATING WORK PLATFORMS. Basic Types. Scissor-Type Machines CHAPTER 22 MOBILE ELEVATING WORK PLATFORMS 22 MOBILE ELEVATING WORK PLATFORMS Basic Types There are two basic types of mobile elevating work platforms (MEWPs): 1. Scissor 2. Boom. Both types share three

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator s Manual Third Edition Sixth Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Operator s Manual. with Maintenance Information. Original Instructions Fourth Edition Fourth Printing Part No

Operator s Manual. with Maintenance Information. Original Instructions Fourth Edition Fourth Printing Part No with Maintenance Information Original Instructions Fourth Edition Fourth Printing Part No. 145356 Fourth Edition Fourth Printing Important Read, understand and obey these safety rules and operating instructions

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Sixth Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Operators and Safety Manual

Operators and Safety Manual Operators and Safety Manual Model 30e 35e n35e 40e n40e 45e 3120742 August 14, 2001 ANSI JLG Lift FOREWORD FOREWORD This manual is a very important tool! Keep it with the machine at all times. The purpose

More information

Operation & Safety Manual. Models 400RTS 500RTS. November 9, 2007

Operation & Safety Manual. Models 400RTS 500RTS. November 9, 2007 Operation & Safety Manual Models 400RTS 500RTS 3120828 November 9, 2007 FOREWORD FOREWORD This manual is a very important tool! Keep it with the machine at all times. The purpose of this manual is to

More information

Operator's Manual GR-12 GR-15 GR-20. with Maintenance Information. Original Instructions Sixth Edition Third Printing Part No.

Operator's Manual GR-12 GR-15 GR-20. with Maintenance Information. Original Instructions Sixth Edition Third Printing Part No. Serial Number Range GR-12 GR-15 GR-20 from GR10-20000 from GRR-101 CE with Maintenance Information Original Instructions Sixth Edition Third Printing Part No. 133572 Front Matter Important Read, understand

More information

Operator s Manual CE/Australian Specifications

Operator s Manual CE/Australian Specifications Operator s Manual CE/Australian Specifications ART_3812 2659ERT -- Serial #13000001 - Up 3259ERT -- Serial #13100001 - Up Specifications............................................ inside cover Introduction.......................................................

More information

Material Handling - Cranes, Hoists, Slings, Chain Falls, and Ratchet Hoists

Material Handling - Cranes, Hoists, Slings, Chain Falls, and Ratchet Hoists Material Handling - Cranes, Hoists, Slings, Chain Falls, and Ratchet Hoists University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob

More information

Serial number and after OPERATOR S MANUAL

Serial number and after OPERATOR S MANUAL Serial number 53578 and after OPERATOR S MANUAL Part Number 8210027 May 2010 The aerial platform is not electrically insulated. Death or serious injury will result from contact with, or inadequate clearance

More information

PRESENTER'S GUIDE "CRANE SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...

PRESENTER'S GUIDE CRANE SAFETY Part of the SAFETY MEETING KIT Series Quality Safety and Health Products, for Today... PRESENTER'S GUIDE "CRANE SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM POINTS The

More information

2 TON CAPACITY PROFESSIONAL SERIES ALUMINUM JACK OWNER'S MANUAL SPECIFICATIONS

2 TON CAPACITY PROFESSIONAL SERIES ALUMINUM JACK OWNER'S MANUAL SPECIFICATIONS 80006 OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Warning Information 3 Setup, Operating and Preventative Maintenance 4 Troubleshooting 5 Maintenance 6 Exploded View Drawing and Replacement Parts

More information

Inspections of Aerial Equipment

Inspections of Aerial Equipment I Inspections of Aerial Equipment Milton J. Luttrell, III Aspen Aerials, Inc. nspections of aerial equipment are a requirement as set forth by the American Nations Standards Institute (ANSI). Owners of

More information

Operator s Manual with Maintenance Information. First Edition Sixth Printing Part No

Operator s Manual with Maintenance Information. First Edition Sixth Printing Part No Operator s Manual with Maintenance Information First Edition Sixth Printing Part No. 72129 Operator's Manual First Edition Sixth Printing Important Read, understand and obey these safety rules and operating

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Fourth Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

North Dakota State University Heavy Equipment Operations

North Dakota State University Heavy Equipment Operations North Dakota State University Heavy Equipment Operations I. Introduction Improper procedures used by NDSU employees can cause injury, disability, or death. By outlining and following safe operating procedures

More information

In This Document MODULE DESCRIPTION This module provides information on the safety concerns and

In This Document MODULE DESCRIPTION This module provides information on the safety concerns and Crane Safety Fact Sheet In This Document MODULE DESCRIPTION This module provides information on the safety concerns and Introduction necessary precautions you will need to be aware of when working Crane

More information

Powered Industrial Truck Operators Policy

Powered Industrial Truck Operators Policy Mount Holyoke College Office of Environmental Health & Safety Powered Industrial Truck Operators Policy I. General Requirements Only trained and certified operators are permitted to operate powered industrial

More information

Parts Manual. Operator's Manual Supplement. Special Supplement to Genie Industries Operator's Manual

Parts Manual. Operator's Manual Supplement. Special Supplement to Genie Industries Operator's Manual Parts Manual Operator's Manual Supplement Special Supplement to Genie Industries Operator's Manual Serial Number Range For Authorized and Trained Set Lighting Technicians and Studio Grips WARNING This

More information

Operator s Manual. with Maintenance Information

Operator s Manual. with Maintenance Information Before serial number Z30N-3448: Incorrect operation can result from use of this manual on machines that have not been updated according to Genie Campaign Bulletin 070001. Death or Serious Injury can result.

More information

CRF-SERIES CARPET POLES INSTRUCTION MANUAL

CRF-SERIES CARPET POLES INSTRUCTION MANUAL VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com

More information

1 Clearheart Construction Co., Inc. Mobile Crane - Onshore MOBILE CRANES Cranes and derricks

1 Clearheart Construction Co., Inc. Mobile Crane - Onshore MOBILE CRANES Cranes and derricks Mobile Crane - Onshore MOBILE CRANES Cranes and derricks. - 1926.550 Cranes, like all pieces of heavy equipment, if not properly operated, inspected and maintained have a potential for causing major bodily

More information

MK AUGERS POWER SWING KIT ASSEMBLY & OPERATION MANUAL

MK AUGERS POWER SWING KIT ASSEMBLY & OPERATION MANUAL MK AUGERS POWER SWING KIT ASSEMBLY & OPERATION MANUAL Read this manual before using product. Failure to follow instructions and safety precautions can result in serious injury, death, or property damage.

More information

jegs.com. Installation Instructions for Ton Aluminum Floor Jack

jegs.com. Installation Instructions for Ton Aluminum Floor Jack Installation Instructions for 80077 3-Ton Aluminum Floor Jack Contents: Specifications Warning Information Setup and Operating Instructions Preventive Maintenance and Troubleshooting Hydraulic Maintenance

More information

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED SAFETY DIRECTIVE Title: Ladders Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This procedure has

More information

Operation and Safety Manual

Operation and Safety Manual Operation and Safety Manual Original Instructions, Keep this manual with the machine at all times. Models 1930ES/2030ES/2630ES/ 2646ES/3246E ANSI P/N - 3121165 May 1, 2013 FOREWORD FOREWORD This manual

More information

Operator s Manual. with Maintenance Information. Fourth Edition Third Printing Part No

Operator s Manual. with Maintenance Information. Fourth Edition Third Printing Part No Operator s Manual with Maintenance Information Fourth Edition Third Printing Part No. 82580 Operator's Manual Fourth Edition Third Printing Important Read, understand and obey these safety rules and operating

More information

CLEARWATER FIRE & RESCUE TRAINING BUREAU

CLEARWATER FIRE & RESCUE TRAINING BUREAU CLEARWATER FIRE & RESCUE TRAINING BUREAU TILLER OPERATOR TASK BOOK #4 Candidate Name (printed) Signature Beginning Date Candidate Station/Shift 08# Hire Date Lieutenant (print) Signature Completion date

More information

OPERATOR S MANUAL 7(5 & ( 8&. $5.00 P/N REV.B

OPERATOR S MANUAL 7(5 & ( 8&. $5.00 P/N REV.B OPERATOR S MANUAL &281 2817( 7(5 %$/$1&( /,)7 7758& 8&. $5.00 P/N 901345 REV.B As a lift truck operator, you are responsible for a machine that is useful, powerful, and can be hazardous if not operated

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Fifth Edition Second Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Forklift Evaluator Training. Module 2

Forklift Evaluator Training. Module 2 Forklift Evaluator Training Module 2 Operating the Forklift Safely operating a forklift requires preparation, anticipation and careful attention in order to maintain control of the vehicle at all times.

More information

Great Western Painting Crane Operator - Offshore CRANE OPERATOR - OFFSHORE

Great Western Painting Crane Operator - Offshore CRANE OPERATOR - OFFSHORE Crane Operator - Offshore CRANE OPERATOR - OFFSHORE Cranes, like all pieces of heavy equipment, if not properly operated, inspected and maintained have a potential for causing major bodily injury or property

More information

Operator s Manual. with Maintenance Information. Third Edition Second Printing Part No

Operator s Manual. with Maintenance Information. Third Edition Second Printing Part No Operator s Manual with Maintenance Information Third Edition Second Printing Part No. 110015 Bi-Energy IC Power Power Operator's Manual Third Edition Second Printing Important Read, understand and obey

More information

Metal/Nonmetal s Unlucky 13 The Best Ways to Avoid 13 Mistakes Most Likely to Kill You

Metal/Nonmetal s Unlucky 13 The Best Ways to Avoid 13 Mistakes Most Likely to Kill You Metal/Nonmetal s Unlucky 13 The Best Ways to Avoid 13 Mistakes Most Likely to Kill You PACA / MSHA Spring Thaw 2010 Randy Newcomer, CMSP Complete Safety Solutions Rules to live by 2000 2008, 289 M/NM miners

More information

STANDARDS PRESENTATION Attachment No. 1 TO Page 1 of 6 CALIFORNIA OCCUPATIONAL SAFETY AND HEALTH STANDARDS BOARD

STANDARDS PRESENTATION Attachment No. 1 TO Page 1 of 6 CALIFORNIA OCCUPATIONAL SAFETY AND HEALTH STANDARDS BOARD TO Page 1 of 6 TITLE 8: Division 1, Chapter 4, Subchapter 4. Construction Safety Orders Article 12. Pile Driving and Pile Extraction [Notes in italics are editorial notes and generally refer to A10.19

More information

Operation and Safety Manual

Operation and Safety Manual Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times. Boom Lift Models E300A E300AJ E300AJP Prior to S/N 0300138358 ANSI 3121214 December 10, 2009 FOREWORD

More information

OPERATOR S MANUAL ECB-22 ELECTRIC FORKLIFT WARNING

OPERATOR S MANUAL ECB-22 ELECTRIC FORKLIFT WARNING OPERATOR S MANUAL ECB-22 ELECTRIC FORKLIFT WARNING Do not operate or service this product unless you have read and fully understand the entire contents of this manual. Failure to do so may result in property

More information

Serial number and after Replaces February 2011 OPERATOR S MANUAL

Serial number and after Replaces February 2011 OPERATOR S MANUAL Serial number 50303 and after Replaces 8210037 February 2011 OPERATOR S MANUAL Part Number 8210037 February 2018 The aerial platform is not electrically insulated. Death or serious injury will result from

More information

Operator s Manual with Maintenance Information

Operator s Manual with Maintenance Information Operator s Manual with Maintenance Information Second Third Edition Seventh First Printing Printing Part No. 43645 97780 Operator's Manual Third Edition First Printing Important Read, understand and obey

More information

Operator s Manual. with Maintenance Information. Second Edition Ninth Printing Part No from 832 to 7189

Operator s Manual. with Maintenance Information. Second Edition Ninth Printing Part No from 832 to 7189 Operator s Manual with Maintenance Information Second Edition Ninth Printing Part No. 43645 from 832 to 7189 Operator's Manual Second Edition Ninth Printing Important Read, understand and obey these safety

More information

Forklift Operator - Safety and Operation. By: Peter Ribbe. PGCert.OHSEM, Dip. OHS, PM, Mn, HRM, Bs.

Forklift Operator - Safety and Operation. By: Peter Ribbe. PGCert.OHSEM, Dip. OHS, PM, Mn, HRM, Bs. Forklift Operator - Safety and Operation By: Peter Ribbe PGCert.OHSEM, Dip. OHS, PM, Mn, HRM, Bs. Before you jump on; Never take for granted that the forklift is in an operational state, the moment you

More information

Operators and Safety Manual

Operators and Safety Manual Operators and Safety Manual Model 26MRT 3120790 April 19, 2000 ANSI JLG Lift FOREWORD FOREWORD The purpose of this manual is to provide users with the operating procedures essential for the promotion of

More information

OPERATORS & SAFETY. Model 26MRT April 11,2000 EUROPEAN OFFICE

OPERATORS & SAFETY. Model 26MRT April 11,2000 EUROPEAN OFFICE OPERATORS & SAFETY Model 26MRT 3120891 April 11,2000 AUSTRALIAN OFFICE JLG INDUSTRIES, INC. P.O. Box 5119 11 Bolwarra Road Port Macquarie, Australia Telephone: 065 811111 Fax: 065 810122 EUROPEAN OFFICE

More information

International Crane Stakeholder Assembly. - Guidance - Lifting of Persons with Mobile Cranes

International Crane Stakeholder Assembly. - Guidance - Lifting of Persons with Mobile Cranes ICSA N003 International Crane Stakeholder Assembly - Guidance - Lifting of Persons with Mobile Cranes Members are: Association of Equipment Manufacturers [AEM] The Crane Industry Council of Australia [CICA]

More information

Operator s Manual. with Maintenance Information. CE Models. Second Edition Fifth Printing Part No

Operator s Manual. with Maintenance Information. CE Models. Second Edition Fifth Printing Part No Operator s Manual with Maintenance Information Second Edition Fifth Printing Part No. 82660 CE Models Operator's Manual Second Edition Fifth Printing Important Read, understand and obey these safety rules

More information

ESCONDIDO FIRE DEPT TRAINING MANUAL Section DRIVER OPERATOR Page 1 of Sutphen Aerial Operations Revised

ESCONDIDO FIRE DEPT TRAINING MANUAL Section DRIVER OPERATOR Page 1 of Sutphen Aerial Operations Revised DRIVER OPERATOR Page 1 of 10 1997 Sutphen Aerial Operations Revised 12-11-17 PROCEDURES FOR ELEVATING THE PLATFORM Placing the aerial platform into service requires qualified personnel trained in the proper

More information

Operators and Safety Manual

Operators and Safety Manual Operators and Safety Manual Model 100HX 100HX+10 110HX 3120635 April 20, 2000 ANSI JLG Lift FOREWORD FOREWORD The purpose of this manual is to provide users with the operating procedures essential for

More information

LIFTING/MOBILE EQUIPMENT CRANES AND DERRICKS. Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio (330)

LIFTING/MOBILE EQUIPMENT CRANES AND DERRICKS. Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio (330) LIFTING/MOBILE EQUIPMENT CRANES AND DERRICKS Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio 44256 (330) 725-6090 CRANES AND DERRICKS INTRODUCTION The Occupational Safety and Health

More information

LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.

LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7 (.80m) 41 0 /8 (3.52m) /16 (2.02m) /4 (.34m) 25 11 0 (. LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY 41 0" (12.50m) 48 7" (14.80m) C L Of Rotation 13 8 1/8" (4.17m) 7 0" (2.13m) 4 5/8" (118mm) 11 6 7/8" (3.52m) 6 7 11/16" (2.02m)

More information

INSTRUCTOR GUIDE TOPIC: APPARATUS RESPONSE LEVEL OF INSTRUCTION: TIME REQUIRED: TWO HOURS MATERIALS: APPROPRIATE AUDIO-VISUAL MATERIALS

INSTRUCTOR GUIDE TOPIC: APPARATUS RESPONSE LEVEL OF INSTRUCTION: TIME REQUIRED: TWO HOURS MATERIALS: APPROPRIATE AUDIO-VISUAL MATERIALS TOPIC: APPARATUS RESPONSE LEVEL OF INSTRUCTION: TIME REQUIRED: TWO HOURS INSTRUCTOR GUIDE MATERIALS: APPROPRIATE AUDIO-VISUAL MATERIALS REFERENCES: Fire Department Safety Officer, 1st ed., International

More information

Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations

Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your

More information

Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and

Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important

More information

LADDER SAFETY PROGRAM

LADDER SAFETY PROGRAM LADDER SAFETY PROGRAM 1.0 PURPOSE This program applies to employees, visitors and contractors (persons/persons) for the purpose of providing requirements necessary to prevent equipment misuse and fall

More information

Port Houston Health, Safety, Security, and Environment Policy Document

Port Houston Health, Safety, Security, and Environment Policy Document Port Houston Health, Safety, Security, and Environment Policy Document Document Control # HSSE-SAF-402 Revision Date 04/26/2017 Document Title Authored by C. Armenoff Document Level Level 4-Truck Driver

More information

AERIAL WORK PLATFORM OPERATOR S MANUAL. with Maintenance Information MVP060E / MVP080E / MVP100E / MVP120E. (Series 1)

AERIAL WORK PLATFORM OPERATOR S MANUAL. with Maintenance Information MVP060E / MVP080E / MVP100E / MVP120E. (Series 1) AERIAL WORK PLATFORM OPERATOR S MANUAL with Maintenance Information MVP060E / MVP080E / MVP100E / MVP120E (Series 1) Zhejiang Dingli machinery Co., Ltd. 2012-12 Important Read, understand and obey these

More information

CRANE, HOIST AND SLING SAFETY PROGRAM

CRANE, HOIST AND SLING SAFETY PROGRAM CRANE, HOIST AND SLING SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.179 and 184 ANSI - B30.2 and 30.9 Crane Manufacturers Association of America 61 BASIS: The Occupational Safety and Health Administration

More information

M20 OPERATOR S SAFETY MANUAL

M20 OPERATOR S SAFETY MANUAL www.reechcraft.com/powerlift M20 OPERATOR S SAFETY MANUAL P/N 4026010 www.reechcraft.com/powerlift It is very important that you read, understand and obey the contents of this manual! Keep it with the

More information

Port Houston Health, Safety, Security, and Environment Policy Document

Port Houston Health, Safety, Security, and Environment Policy Document Port Houston Health, Safety, Security, and Environment Policy Document Document Control # HSSE-SAF-401 Revision Date 04/26/2017 Document Title Authored by C. Armenoff Document Level Level 4-Truck Driver

More information

POWERED INDUSTRIAL TRUCK OPERATOR TRAINING

POWERED INDUSTRIAL TRUCK OPERATOR TRAINING POWERED INDUSTRIAL TRUCK OPERATOR TRAINING TABLE OF CONTENTS General Information Select a Trainer Identify Employees to be Trained Training Manual Develop a Training Schedule Conduct Formal (classroom)

More information

CICA HOIST SECTOR FAQs - RELEVANT STANDARDS / REGULATIONS. A. How do I find Australian Standards for cranes?

CICA HOIST SECTOR FAQs - RELEVANT STANDARDS / REGULATIONS. A. How do I find Australian Standards for cranes? CICA HOIST SECTOR FAQs - RELEVANT STANDARDS / REGULATIONS A. How do I find Australian Standards for cranes? Summary: SAI Global is the publisher for Australian Standards, http://infostore.saiglobal.com/store/.

More information

The following is a list of guidelines that apply to all evolutions.

The following is a list of guidelines that apply to all evolutions. PURPOSE: To ensure that personnel maintain a standard of performance consistent with the Memphis Fire Department s commitment to providing the community with prompt and efficient service. SCOPE: Fire Training

More information

AIRPORT TERMINAL SERVICES, Inc BELT LOADER MODULE. Revised 10/1/05

AIRPORT TERMINAL SERVICES, Inc BELT LOADER MODULE. Revised 10/1/05 AIRPORT TERMINAL SERVICES, Inc BELT LOADER MODULE INTRODUCTION This training module is designed to familiarize you with the operational aspects of a belt loader. You are responsible for reading and understanding

More information