STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

Transcription

1 SPEC # T-628(5) Tractors, Ag Type Factory Attach. Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Lano Equipment Inc. Anoka Scott Fahey 6340 Hwy 10 NW Anoka, MN STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Address: Version of Excel used: October, 2016 Spec # Information Requested Answer 1.0 Tractor Catalog Section Price List Title: Kubota Wholegoods Pricing BX70 Series, B Series, L Series, Loader Landscaper (LL) Series, M Series, BX80 Series Master Order Form, M7 Series Master Order Form, Hay Series, VS Spreader Series BX70 9/15/16, B 11/9/16, L 8/8/16, LL 8/19/16, M 10/25/16, BX80 Master Order Form 12/1/16, M7 Master Order Form 12/1/16, Hay 5/10/16, VS Spreaders Date & I.D. of Price List: 5/10/16 Percentage Discount to be applied to Price List: BX70, B, L, M, BX80, M7, Hay, VS Series - 18% Loader Landscaper Series -22% 1.1 Price for manuals, (service, parts, repair, and operations) $ Price for set of fluid and air filters $160, M7 $ PERFORMANCE/EXTENDED WARRANTY OPTIONS Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc. (Specify years, miles or hours extended term covers.) 2.1 $ 2.2 $ 3.0 INSTALLATION - PER HOUR $99/hr Installation services may be requested on an "as needed" basis. See Special Terms and Conditions 4.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: $ If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $15/hr 6.0 DISCOUNT OFF FOR RELATED PARTS & ACCESSORIES See Special Terms and Conditions DELIVERY Starting Point: City, State, ZIP: Ramsey, MN Charge Per Loaded Mile: $3/mi, $100 minimum See Special Terms and Conditions - No flat rate allowed

2 M SERIES WHOLEGOODS PRICE LIST EFFECTIVE AUGUST 17, 2016 NOTE: Tire prices appear per piece. Approximate shipping weight listed is crated weight. Refer to New Product Guides for operating weight. Page 9-1

3 M SERIES PAGE NUMBER MODEL PTO H.P. LIST PRICE 9-5 MX4800F 40.5 $ 20, MX4800DT 40.5 $ 25, MX4800HST 39 $ 27, MX5200F 45.7 $ 21, MX5200DT 45.7 $ 26, MX5200HST 44.2 $ 28, MX5800HST 50.2 $ 29, M5640SU* 50 $ 20, M5640SUD* 50 $ 24, M5640SUD-1* 50 $ 25, M5660SUH 50 $ 25, M5660SUHD 50 $ 30, M7040SUH* 64 $ 25, M7040SUHD* 64 $ 30, M5140F* 46 $ 22, M5140FC* 46 $ 31, M5140DT* 46 $ 26, M5140HD* 46 $ 28, M5140DTC* 46 $ 35, M5140HDC* 46 $ 37, M6040HDNB-1 56 $ 35, M6060HFC 56 $ 37, M6060HD 56 $ 33, M6060HDC 56 $ 41, M7060HFC 64 $ 39, M7060HD 64 $ 34, M7060HDC 64 $ 43, M7060HD12 64 $ 37, M7060HDC12 64 $ 45, M7040HDNB-1 64 $ 37, M7040HDNBC-1 64 $ 47, M8560HF* 76 $ 33, M8560HFC* 76 $ 41, M8560HD* 76 $ 37, M8560HD12* 76 $ 38, M8560HDC* 76 $ 45, M8560HDC12* 76 $ 47, M8540HDNB-1 76 $ 40, M8540HDNBC-1 76 $ 50, M8540HDNBC10 76 $ 50, M8540HDNBPC-1 76 $ 59, M5-091HF 76 $ 43, M5-091HFC 76 $ 53, M5-111HF 89 $ 46, M5-111HFC 89 $ 56, M5-091HD 76 $ 48, M5-091HD12 76 $ 49, M5-091HDC 76 $ 58, M5-091HDC12 76 $ 60, * Subject to availability. Page 9-2

4 M SERIES PAGE NUMBER MODEL PTO H.P. LIST PRICE 9-83 M5-111HD 89 $ 51, M5-111HD12 89 $ 52, M5-111HDC 89 $ 61, M5-111HDC12 89 $ 62, M5-111HDC24 89 $ 65, M5L-111-SN 89 $ 57, M4N-071HDC12 61 $ 59, M5N-091HDC12 78 $ 65, M5N-091HDC24 75 $ 67, M5N-111HDC12 91 $ 69, M5N-111HDC24 88 $ 71, M9960HF* 89 $ 37, M9960HFC* 89 $ 45, M9960HD* 89 $ 41, M9960HD12* 89 $ 43, M9960HDC* 89 $ 50, M9960HDC12* 89 $ 51, M9960HDC24* 89 $ 54, M9960HDL-SN* 89 $ 46, M96SHDM 84 $ 60, M6-101DTC-F 82 $ 80, M6-111DTC-F 92 $ 83, M108SH 96 $ 44, M108SHD 96 $ 52, M108SHC 96 $ 53, M108SHDC 96 $ 62, M108SHDC2 96 $ 62, M108SDS 96 $ 54, M108SDS2 96 $ 55, M108SDSC 96 $ 64, M108SDSC2 96 $ 64, M108SDSL-SN 96 $ 54, M108SDSL2-SN 96 $ 54, M100GXDTC* 85 $ 65, M110GXDTC* 95 $ M6-131DTC-F 104 $ 85, M6-141DTC-F 114 $ 91, M6-141DTSC-F 114 $ 99, M126GXDTC* 108 $ 78, M126GXDTC-F* 108 $ 78, M135GXDTC* 118 $ 81, M135GXDTC-F* 118 $ 82, M135GXDTSC-F* 118 $ 89, M-Series Tractor / Loader Matching Chart M-Series Front Loaders M-Series Backhoe M-Series Snowblowers M-Series Replacement Engines Page 9-3

5 M SERIES ASSEMBLY CHARGES NO DISCOUNT ON ASSEMBLY CHARGES Assembly Fee All ROPS/Cab Model Tractors $ Assembly Fee includes basic assembly of tractor including wheels, tires, ROPS or Cab, front and rear weights. M-Series, Wide Front Axle Kits (M60, M-S, M-X, M-GX) $ M96SHDM Wide Row Kit installation fee (Front and Rear Axles) $ This is in addition to standard fee, Wide Row models will be assembled and shipped from Lodi, CA. All optional hydraulic remote valves and/or flow control valves, ordered and assembled on the tractor $65.00 All optional hydraulic lever kits ordered and assembled on the tractor $ /1000 Dual Speed PTO (M8560 / M9960 / M96SHDM / M108S Models) $ /540E Dual Speed PTO (M8560 / M9960) $85.00 Single Cylinder 3-point Lift Assist Kit (M108SDSL) $55.00 Dual Cylinder 3-point Lift Cylinder Kit (M8560/M9960/M96SHDM/M108S/ $ M100GX/M110GX/M126GX/M135GX Loader Assembly Charges (All MX/M/M-X/M-GX Series) $ Backhoe Assembly Charges (BH92) $85.00 ALL OTHER KITS ARE FIELD INSTALLED ONLY. Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point. Complete revision August 17, Page 9-4

6 MX SERIES MX4800/MX5200/MX5800 * * * EQUIPMENT IN STANDARD MACHINE & SPECIFICATIONS * * * DIESEL ENGINE Kubota V2403 Direct Injection 2.4L (148.5 cu. in.) 4 Cyl EPA Tier 4 Final Compliant Common Rail Electronic Fuel Injection 45 Amp Alternator ROPS 12V 600 CCA Battery EXHAUST EMISSION CONTROL TYPE DPF System (Diesel Particulate Filter) HYDRAULICS / HITCH / DRAWBAR Open Center Gear Pump Max. Rated Engine Speed: 2700 RPM Power Steering: 4.9 gpm Impl. Flow: 9.5 gpm Total Flow: 14.4 gpm REMOTE VALVES Optional (3) valves Float Detent, Detent or Spring Center 3 POINT HITCH & DRAWBAR Cat I/ II 3-Point Lift Points: 2870 lbs (ASAE)@24 Behind: 2310 lbs 2WD Model - Rigid Lower Links 4WD Model - Telescoping Lower Links 2WD Model - Turn Buckle Stabilizers 4WD Model - Telescoping Stabilizers Drawbar - Straight POWER TAKE OFF Live-Independent Hyd. PTO SAE 1 3/8 Six Spline Eng. RPM Eng. RPM, 12/24 Speed TRANSMISSION - F / DT 4-Speed Partially Syncronized 8F/8R Two Range Clutch - Dry Hydraulic Wet Disc Brakes Rear Differential Lock TRANSMISSION - HST 3 Range Low/Med/High Cruise Control Standard Hydraulic Wet Disc Brakes Left Side Brake Pedals Rear Differential Lock FRONT AXLE Hydrostatic Power Steering 2WD: Tubular Steel Beam Telecoping 4WD: Cast Iron, Bevel Gear FLUID CAPACITY Fuel Tank Capacity: 13.5 gal. Cooling System: 6.9 qts. Crankcase: 8.7 qts. Hydraulics/Trans: 11.6 gal. Front Axle 4WD: 8.9 qts. INSTRUMENTS Tachometer/Hour meter Oil Pressure Fuel Gauge Coolant Temperature TIRES AND WHEELS 2WD: Front 7.5L x 15 R1 Rear 14.9 x 26 R1 4WD: Front 9.5L x 16 R1 Rear 14.9 x 26 R1 OPERATOR PLATFORM Semi-Flat Deck with Hanging Pedals High Back Seat with Adjustable Suspension Color Coded Controls Cup Holder LIGHTING 2 Headlights - Tail Lights 2 Hazard Flasher Lights w/ Turn Signals SAFETY EQUIPMENT 2 Post, ROPS Certified Retractable Seat Belt Flip-Up PTO Shield Safety Start Switches: Shuttle Lever Neutral PTO Off Electric Key Shut Off Parking Brake Turn Signals SMV Sign Model Specifications MX4800 MX5200 MX5800 SAE Gross HP: 49.3 SAE Gross HP: 54.7 SAE Gross HP: 61.4 Engine Net HP: 46.9 Engine Net HP: 52.1 Engine Net HP: 57.5 Max. PTO HP F/DT: 40.5 Max. PTO HP F/DT: 45.7 Max. PTO HP: 50.2 Max. PTO HP HST: 39.0 Max. PTO HP HST: 44.2 Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point. Complete revision August 17, Page 9-5

7 MX Series MX4800/MX5200/MX5800 2WD MODELS MX4800F MX5200F * * * STANDARD TRACTOR WITH STANDARD TIRES * * * 2WD Utility 2 Post Foldable ROPS Tractor 2WD Utility 2 Post Foldable ROPS Tractor 3474 lbs $20, lbs $21, MX4800F/ MX5200F 2WD TIRES AND WHEELS AG - BIAS REAR ALR8852A* F-TIRE 7.5L-15 F2 Firestone Guide Grip 62 lbs AMXR8861* R-TIRE Titan Hi Power Lug TL 254 lbs AMXR8789 F-TIRE 9.5L-15 F2 BKT Pro Rib 75 lbs AMXR8861 R-TIRE Titan Hi Power Lug TL 254 lbs Additional Price With Tire Option WEIGHT FACTORY SUGG. LIST In Base Price Add In Base Price $ ALR8852A F-TIRE 7.5L-15 F2 Firestone Guide Grip 62 lbs AMXR8813A R-TIRE R1 Titan Hi Trac Lug TL 242 lbs In Base Price In Base Price AMXR8789 F-TIRE 9.5L-15 F2 BKT Pro Rib 75 lbs AMXR8813A R-TIRE R1 Titan Hi Trac Lug TL 242 lbs Add $ TURF AMXR8837 F-TIRE 29x R3 Ttn MultiTrac6stud 73 lbs ALR6802 R-TIRE 44x18-20 R3 Titan MultiTrac 8stud 221 lbs Add $ ALR6818A F-TIRE LSW305R343 R3 Titan Grizz LSW lbs ALR6819 R-TIRE LSW610R470 R3 Grizz LSW 430 8stud 227 lbs Add $ See Tire Section for Individual Tire Pricing and Information * Standard Tires For field installation, order (12) Spring Washers from Parts.

8 MX Series MX4800/MX5200/MX5800 4WD MODELS MX4800DT MX4800HST MX5200DT MX5200HST MX5800HST * * * STANDARD TRACTOR WITH STANDARD TIRES * * * 4WD Utility 2 Post Foldable ROPS 4WD Utility 2 Post Foldable ROPS, HST Transmission 4WD Utility 2 Post Foldable ROPS 4WD Utility 2 Post Foldable ROPS, HST Transmission 4WD Utility 2 Post Foldable ROPS, HST Transmission 3474 lbs $25, lbs $27, lbs $26, lbs $28, lbs $29, M4800 / M5200 / MX5800 4WD TIRES AND WHEELS AG - BIAS REAR WEIGHT EACH AMXR8860A* F-TIRE R1 Gdyr Dura Torque 6stud 78 lbs AMXR8861* R-TIRE Titan Hi Power Lug TL 254 lbs AMXR8860A F-TIRE R1 Gdyr Dura Torque 6stud 78 lbs AMXR8813A R-TIRE R1 Titan Hi Trac Lug TL 242 lbs INDUSTRIAL AMXR8828 F-TIRE R4 Titan HD lbs AMXR8862 R-TIRE 17.5L-24 R4 Titan Ind Cont TL 257 lbs TURF ALR8708 F-TIRE 29x R3 Titan Turf 82 lbs ALR6802 R-TIRE 44x18-20 R3 Titan MultiTrac 8stud 221 lbs Additional Price With Tire Option FACTORY SUGG. LIST NUMBER In Base Price In Base Price In Base Price In Base Price Add $ Add $ ALR6818A F-TIRE LSW305R343 R3 Titan Grizz LSW lbs ALR6819 R-TIRE LSW610R470 R3 Grizz LSW 430 8stud 227 lbs See Tire Section for Individual Tire Pricing and Information * Standard Tires For field installation, order (12) Spring Washers from Parts Add $ Page 9-7

9 MX SERIES MX4800/MX5200/MX5800 DEALER INSTALLED ACCESSORIES HYDRAULICS/HITCH/DRAWBAR HYDRAULIC REAR REMOTE VALVES STANDARD NON-CONTINUOUS FLOW VALVES L8303 Single Spool Hyd. Valve, no Detents 4 lbs $ Requires One Base Kit for First Valve L8304 Single Spool Hyd. Valve, with Float Detent 4 lbs $ Requires 2nd Position or 3rd Position Kit STANDARD NON-CONTINUOUS FLOW VALVE LEVER KITS MX8451 Base Kit and 1st Lever 14 lbs $ Requires Valve MX8452 2nd Position Stacking Kit and 2nd Lever 7 lbs $ Requires Base Kit and Valve MX8453 3rd Position Stacking Kit and 3rd Lever 7 lbs $ Requires Base Kit, 2nd Postion Kit and Valve CONTINUOUS FLOW DETENTING VALVES MX5141 Locking Detent Valve and Hose Kit 8 lbs $ MX5151 Float Detent Valve and Hose Kit 24 lbs $ Only for 2nd or 3rd Position MX5161 Standard 3-Way Spring Center Valve and Hose Kit 7 lbs $ MX5171 Lever Guide 7 lbs $30.00 CONTINUOUS FLOW REMOTE VALVE LEVER KITS MX5111 1st Position Remote Base Kit 24 lbs $ Requires Valve and Hose Kit and Lever Guide Not Compatible with Non-Continuous Flow Valves MX5121 2nd Position Rear Remote Stacking Kit 3 lbs $ Requires Valve and Hose Kit Not Compatible with Non-Continuous Flow Valves MX5131 3rd Position Rear Remote Stacking Kit 24 lbs $ Requires Valve and Hose Kit Not Compatible with Non-Continuous Flow Valves HITCH/DRAWBAR OPTIONS 3-POINT TELESCOPIC LINK / STABILIZER KIT MX9495 Telescopic Link Ends and Stabilizer Kit Optional for 2WD, Standard on 4WD models DRAFT CONTROL L8311C Draft Control Not Compatible with Detent Valves 81 lbs $ lbs $ DRAWBAR CLEVIS M9594 Drawbar Clevis 12 lbs $71.00 TOP-N-TILT KIT L8388 Top (Cylinder) and Tilt (Cylinder) Kit 44 lbs $ Not Compatible with BH92 Backhoe

10 MX SERIES MX4800/MX5200/MX5800 DEALER INSTALLED ACCESSORIES ROPS ACCESSORIES CANOPY E1134 Deluxe Fiberglass Canopy 63 lbs $ Requires E1136 Mounting Kit E1136 Mounting Kit Includes Brackets/Hardware/Instructions REAR WHEEL WEIGHT BOLT KITS LM8125A Bolt Kit for LM8124 Weight One Kit per Weight Set 29 lbs $ E1138 Work Light Set for Canopy (Optional 2-lights) 3 lbs $ REAR WORK LIGHT M9551 Rear Working Auxilary Light (Maximum 1 Light/Tractor) 3 lbs $85.00 BALLAST FRONT WEIGHT BRACKETS MX8068 Weight Bracket 29 lbs $96.00 Able to hold up to 7 BL Weights Standard on 2WD Model, Not compatible with Grille Guard. FRONT SUITCASE WEIGHTS BL Suitcase Weight (55 lbs.) 55 lbs $71.00 Requires MX8068 and BL8060B FRONT WEIGHT BOLT/BAR KITS BL8060B Bolt/Bar Kit - Weight(s) 2 lbs $2.00 One Bolt/Bar Kit per 1 Weight ADDITIONAL ACCESSORIES BLOCK HEATER GRILL GUARD MX2268 RADIATOR HEATER REPLACEMENT ROPS SFMX-F52 Block Heater Grill Guard Kit for Loader and Non-Loader (hold 4 frt. Wts) Applications with LA1065 Loader, standard with Loader Radiator Heater (Order from Parts Department) (Order from Parts Department) 62 lbs $ Replacement ROPS - Field Installation Required $ REAR WHEEL WEIGHTS LM8124 Rear Wheel Weight (103 lbs. each) 206 lbs $ Set of 2 Weights, Maximum of 3 Sets Requires Bolt Kit Not Compatible with Turf Tires 5 lbs $67.00 M8121A Bolt Kit for 2nd and 3rd Set of Rear Wheel Weights 8 lbs $21.00 One Kit per Weight Set Page 9-9

11 MX SERIES MX4800/MX5200/MX5800 Front End Loaders FRONT END LOADER LA1065 Front End Loader Includes Mounting Kit, Loader Valve, Parking Stands, 2-Lever QA Coupler, and Grill Guard 1120 lbs $4, DOES NOT INCLUDE BUCKET or ROD LEVEL INDICATOR, must be ordered separately LOADER ACCESSORIES LOADER LEVEL INDICATOR MX2140 Bucket/Attachment Level Indicator (Rod Type) 7 lbs $72.00 BUCKETS & ACCESSORIES BUCKETS / CUTTING EDGES ALL 2-LEVER TYPE QA L Quick Attach Heavy Duty Round Back Bucket 400 lbs $1, L Quick Attach Light Material Bucket 323 lbs $ L2235A 72 Quick Attach Square Back Bucket 346 lbs $ BUCKET ACCESSORIES TL Bolt-on Reversible Cutting Edge 70 lbs $ for Heavy Duty Round Back Bucke BALE SPEARS L2237 Bale Spear 2 Lever Type QA 165 lbs $ PALLET FORK FRAME / PALLET FORKS L2238 Pallet Fork Frame 2 Lever QA 165 lbs $ Requires Pallet Forks K " Pallet Forks 176 lbs $ K " Pallet Forks 196 lbs $476.00

12 MX SERIES Backhoes MX4800/MX5200/MX5800 BACKHOE & ACCESSORIES BH92 Backhoe, 9 ft. digging depth Requires Mounting Kit and Bucket 1696 lbs $7, BACKHOE MOUNTING KIT BH4978 Backhoe Subframe Kit 292 lbs $1, BACKHOE ACCESSORIES BH Position Mechanical Thumb 56 lbs $ BT4598 Hydraulic Thumb 142 lbs $2, Requires Valve Kit BH4948 Hydraulic Thumb Valve Kit 23 lbs $ BT4550 Quick Coupler 55 lbs $ RUBBER FLIP PADS L9467 Rubber Flip Pad - 2 Required per Order 15 lbs $ PIN-ON TYPE BUCKETS BT " Bucket (1.19 cu. ft. Struck / 1.47 cu. ft. Heaped) 109 lbs $ BT3002A 16" Bucket (1.67 cu. ft. Struck / 2.16 cu. ft. Heaped) 130 lbs $ BT3003A 18" Bucket (1.91 cu. ft. Struck / 2.51 cu. ft. Heaped) 151 lbs $ BT " Bucket (2.63 cu. ft. Struck / 3.60 cu. ft. Heaped) 172 lbs $ BT3005A 30 Bucket (3.34 cu. ft. Struck / 4.69 cu. ft. Heaped) 205 lbs $1, BT Bucket (4.06 cu. ft. Struck / 5.78 cu. ft. Heaped) 226 lbs $1, QUICK COUPLER TYPE BUCKETS BT4552 BT " Bucket (1.19 cu. ft. Struck / 1.47 cu. ft. Heaped) Requires Quick Coupler 16" Bucket (1.67 cu. ft. Struck / 2.16 cu. ft. Heaped) Requires Quick Coupler 117 lbs $ lbs $ BT " Bucket (1.91 cu. ft. Struck / 2.51 cu. ft. Heaped) 146 lbs $ Requires Quick Coupler BT4555 BT " Bucket (2.63 cu. ft. Struck / 3.60 cu. ft. Heaped) Requires Quick Coupler 36 Bucket (4.06 cu. ft. Struck / 5.78 cu. ft. Heaped) Requires Quick Coupler 176 lbs $1, lbs $1, Page 9-11

13 MX SERIES MX4800/MX5200/MX5800 Approved Attachments Land Pride Rotary Cutters Land Pride Disc Harrows RCR1872 DH2572 RCR1884 DH2596 RCF2060 RCF2084 Land Pride Quick Hitches RCR2672 QH15 (Cat. I) RCR2684 QH20 (Cat. II) RCF2772 RCF3010 (Pull Type) Land Pride Hydraulic Reservoir System RCF3010 (Semi-Mount) HRS18 RCF3696 (Pull Type) HRS23 RCF3696 (Semi-Mount) HSR3025 RC2512 (Pull Type) Land Pride Grapple Claw Land Pride Rotary Tillers SGC1560 RTR1274 SGC1572 RTR1574 SGC1584

14 M5640SU / SUD * * * EQUIPMENT IN STANDARD MACHINE * * * DIESEL ENGINE Model # V Cyl cu. in Net Eng. HP + 50 PTO 2700 Eng. rpm EPA Emission Certified Interim Tier IV 12V CCA Battery Charging Output 40 amps HYDRAULICS / HITCH / DRAWBAR Open Center -- Gear Type Dual Pumps 6.1 gpm Power Steering 11.0 gpm Remotes / 3 Pt. Hitch 17.1 gpm Total Cat I/II 3-point Hitch Position Control (no draft control) At lift Point 4200 lbs. 24 Behind 3307 lbs. Stabilizer Links Swinging Drawbar FRONT AXLE 2WD: Hydrostatic Power Steering Tubular Steel Beam Adj. (Telescoping) Tread Spacing 4WD: Bevel Gear Cast Iron Adj. (Rim) Tread Spacing DRIVE TRAIN Four Speed Partially Synchronized (3rd-4th) 4F/ 4R Synchro-Shuttle 8F/ 4R Speeds Planetary Final Drives Rear Differential Lock FLUID CAPACITY Fuel Tank (ROPS) Cooling System Crankcase Transmission and Hydraulics Front Axle INSTRUMENTS Tachometer/Hour meter Oil Pressure Fuel Gauge Coolant Temperature 13.1 gal. 7.4 qts. 7.6 qts gal. 8.5 qts. POWER TAKE OFF Live-Independent Hyd. PTO SAE 1 3/8 Six Spline Eng. rpm LIGHTING 2 Headlights - Tail lights 2 Hazard Flasher Lights with Turn Signals SAFETY EQUIPMENT 2-Post Foldable ROPS with Retractable Seat Belt Flip-Up PTO Shield Safety Start Switches (Shuttle Lever and PTO Lever) Manual Shut Off Wet Disc Brakes Parking Brakes Turn Signals SMV Sign TIRES AND WHEELS 2WD: Front F2 Rear R1 4WD: Front R1 Rear R + Manufacturer estimate. M5640SU* * * * STANDARD MACHINE WITH STANDARD TIRES * * * 2WD TRACTOR with 2 Post Foldable ROPS 3747 $ 20, M5640SUD* 4WD TRACTOR 3858 $ 24, with 2-Post Foldable ROPS Page 9-13

15 M5640SU / SUD M5640SU* TIRES AND WHEELS (priced per piece) Price with Tire Option SUGG. LIST SUGG. LIST PRICE FACT. NO. MR8950** F-TIRE F2 Steel Bia 63 $ $ 20, AMR8901B** R-TIRE R1 AG Steel Bias DA 255 $ AMXR8789 F-TIRE 9.5L-15 F2 BKT PRO RIB 75 $ $ 20, AMR8901B R-TIRE R1 AG Steel Bias DA 255 $ AMXR8789 F-TIRE 9.5L-15 F2 BKT PRO RIB 75 $ $ 21, AMR8913B R-TIRE R1 AG Steel Bias DA 299 $ 1, ALR8708 F-TIRE 29x R3 TF 73 $ $ 20, AMR8979 R-TIRE 21.5L-16.1 R3 TF Steel Bias DA 245 $ ALR6818A F-TIRE LSW305R343 R3 TF STL RADAL AA 116 $ $ 21, AMR8541 R-TIRE LSW R3 6PLY SFT TRF ST 261 $ 1, AMR8545 AMR8979 ** Standard tires. Low profile turf tires. Not approved for loader application. Not approved for Backhoe applications. F-TIRE 27X I1 R-TIRE 21.5L-16.1 R3 TF Steel Bias DA $ $ $ 20, M5640SUD* TIRES AND WHEELS (priced per piece) Price with Tire Option SUGG. LIST SUGG. LIST PRICE AMR8973A** F-TIRE R1 GDYR DURA TORQUE TL 128 $ $ 24, AMR8901B** R-TIRE R1 AG Steel Bias DA 255 $ MR8953 F-TIRE R1 AG 100 $ $ 24, AMR8901B R-TIRE R1 AG Steel Bias DA 255 $ MR8953 F-TIRE R1 AG 100 $ $ 25, AMR8913B R-TIRE R1 AG Steel Bias DA 299 $ 1, AMR8992 F-TIRE 12.5/80-18 R4 IN Steel Bias AA 150 $ $ 25, ALR8917 R-TIRE R4 IN Steel 267 $ ALR8708 F-TIRE 29x R3 TF 73 $ $ 24, AMR8979 R-TIRE 21.5L-16.1 R3 TF Steel Bias DA 245 $ ** Standard tires.. Low profile turf tires. Page 9-14

16 M5640SU / SUD M7622 M7601 SCD (Self Canceling Detent) First Valve with Lever SCD (Self Canceling Detent) Second Position Valve with Lever 15 $ $ M7602 FD (Float Detent) Second Position Valve with Lever 15 $ DRAWBAR CLEVIS M9534 Drawbar Clevis 10 $85.00 CANOPY E1134 Deluxe fiberglass Canopy 63 $ Requires E1136 Mounting Kit E1136 Mounting Kit (Brackets/Hardware/Instructions) 30 $ E1138 Work Light Set for Canopy (Optional 2-Lights) 10 $ REAR WORK LIGHT M7630 One Light (Maximum 1 Light/Tractor) 4 $85.00 FRONT AXLE 72 TREAD SPACING FOR M5640SU Tie Rod End Extension Kits, requires (2) (Order from Parts Department) REAR AXLE SPACER KIT M9564 Rear Axle Spacer Kit 50 $ BLOCK HEATER (Available only from Parts) Block Heater (Order from Parts Department) TOOL BOX M9426 Tool Box 10 $ HAND GRIP (Right Fender) T Hand Grip (Order from Parts Department) M7622 1st Valve option accepts either or both M7601 or M7602 Valves for 2 nd or 3 rd position, M7601, M7602 includes 2 stack or 3 stack mounting studs. Do not fold ROPS with canopy. Rear Axle Spacer Kit provides 72 Spacing with AG tires on 2WD models. M7622 First Valve is required first before adding M7602 FD Float Detent Valve. Page 9-15

17 M5640SU / SUD TELESCOPING LOWER LINK KIT M9501 Telescoping Lower Link Kit for 3 Pt. Hitch BALLAST BOX M8180 Three point Ballast Box 1280 lbs capacity with dry sand (13 cubic feet) $ $ FRONT WEIGHTS, WEIGHT BUMPER AND BOLT KIT M8071 Suitcase Weight (105 lbs. Each) Requires M8070 or M8075 Weight Bumper and M8074 or M8073 Bolt Kit. M Weights, M Weights. M8070 M8075 Weight Bumper (85 lbs.) Standard on 2WD M5640SU. Includes Mounting Bolt Kit. Requires M8074 Bolt/Bar Kit. Weight Bumper (230 lbs. each) Optional (1-10 M8071 Weights) Requires M8076 Bolt Kit. 105 $ $ $ M8076 Bolt Kit - Bumper for M $57.00 M8074 M8073 M1059 Bolt/Bar Kit - Weight for M8070 One Kit per 1-8 M8071 Weights Bolt/Bar Kit - Weight for M8075 One Kit per 1-10 of M8071 Weights. Front Weight Bracket Kit (Loader Application) Requires M8074 Bolt/Bar Kit. Holds 1-8 M8071 Suitcase Weights when LA1002 Loader is detached. 7 $ $ $ REAR WHEEL WEIGHTS AND BOLT KIT (You must order both items.) M8126A Set of 2 (164 lbs. each) Requires LM8125A Bolt Kit for 1st Set. Use with 28" diameter Steel Dish Wheels. M8127B Bolt Kit use for 2nd and 3rd set of M8126A wts., one Bolt Kit per weight set. LM8124 Set of 2 (103 lbs. each) For Standard and Low Profile wheels. 1-3 Wts. per steel dish, 1-2 wts. per Cast Iron dish. Use with 24" or 26" steel dish wheels. Requires LM8125A Bolt Kit for first set of weights. 328 $ $ $ M8121A Bolt Kit for 2nd and 3rd Set of LM8124 Weights 3 $21.00 LM8125A Bolt Kit for use with 1st set LM8124 and M8126A wts. 6 $67.00 Maximum 3 weights per wheel. M8127B Bolt Kit is required to add 2nd and 3rd set of M8126A weights. Requires one M8127B per M8126A weight set. Up to 3 weights per wheel. Use M8121A Bolt Kit to attach 2nd and 3rd set of LM8124 weights. Requires one Bolt Kit per set of additional weights. Not compatible with 24 M-Series 4WD front wheels. Either M8070 or M8075 can be used as the option on M5640SUD models without loader. Not compatible with LA1002-5R2 Loader, use M1059. Page 9-16

18 M5640SUD-1* DIESEL ENGINE Model # V Cyl cu. in Net Eng. HP + 50 PTO 2700 Eng. rpm EPA Emission Certified Interim Tier IV 12V CCA Battery Charging Output 40 amps DRIVE TRAIN Four Speed Partially Synchronized (3rd-4th) 4F/ 4R Synchro-Shuttle 8F/ 4R Speeds Planetary Final Drives Rear Differential Lock FLUID CAPACITY Fuel Tank (ROPS) Cooling System Crankcase Transmission and Hydraulics Front Axle INSTRUMENTS Tachometer/Hour meter Oil Pressure Fuel Gauge Coolant Temperature POWER TAKE OFF Live-Independent Hyd. PTO OPERATOR PLATFORM Flat Deck w/hanging Pedals High Back Seat with Adjustable Suspension LIGHTING 2 Headlights - Tail lights 2 Hazard Flasher Lights with Turn Signals SAFETY EQUIPMENT 13.1 gal. 2-Post Foldable ROPS with 7.4 qts. Retractable Seat Belt 7.6 qts. Flip-Up PTO Shield HYDRAULICS / HITCH / DRAWBAR Safety Start Switches (Shuttle Open Center -- Gear Type Dual 10.6 gal. Lever and PTO Lever) Pumps 8.5 qts. Manual Shut Off 6.1 gpm Power Steering Wet Disc Brakes 11.0 gpm Remotes / 3 Pt. Hitch Parking Brakes 17.1 gpm Total Turn Signals First Remote (SCD) with Self Canceling SMV Sign Detents TIRES AND WHEELS Cat I/II 3-point Hitch 2WD: Front F2 Position Control (no draft control) Rear R1 At lift Point 4200 lbs. SAE 1 3/8 Six Spline 4WD: Front R1 24 Behind 3307 lbs Eng. rpm Rear R Telescopic Lower Link Ends Stabilizers Swinging Drawbar FRONT AXLE 4WD: Bevel Gear Cast Iron Adj. (Rim) Tread Spacing + Manufacturer estimate. * * * STANDARD MACHINE WITH STANDARD TIRES * * * M5640SUD-1 * 4WD TRACTOR with 2-Post Foldable ROPS 3858 $ 25, Page 9-17

19 M5640SUD-1 M5640SUD-1 TIRES AND WHEELS (priced per piece) Price with Tire Option SUGG. LIST SUGG. LIST PRICE FACT. NO. AMR8973A** F-TIRE R1 6PLY DURA TORQUE TL 128 $ $ 25, AMR8901B** R-TIRE R1 AG Steel Bias DA 255 $ MR8953 F-TIRE R1 100 $ $ 25, AMR8901B R-TIRE R1 AG Steel Bias DA 255 $ MR8953 F-TIRE R1 100 $ $ 26, AMR8913B R-TIRE R1 AG Steel Bias DA 299 $ 1, AMR8992 F-TIRE 12.5/80-18 R4 IN Steel Bias AA 150 $ $ 26, ALR8917 R-TIRE R4 IN Steel 267 $ ALR8708 AMR8979 ** Standard tires. Low profile turf tires. Not approved for Backhoe applications. F-TIRE 29x R3 TF Ste R-TIRE 21.5L-16.1 R3 TF Steel Bias DA $ $ $ 25, Page 9-18

20 M5640SUD-1 M7601 M7602 SCD (Self Canceling Detent) Second Position Valve with Lever FD (Float Detent) Second Position Valve with Lever 15 $ $ DRAWBAR CLEVIS M9534 Drawbar Clevis 10 $85.00 CANOPY E1134 Deluxe fiberglass Canopy 63 $ Requires E1136 Mounting Kit E1136 Mounting Kit (Brackets/Hardware/Instructions) 30 $ E1138 Work Light Set for Canopy (Optional 2-Lights) 10 $ REAR WORK LIGHT M7630 One Light (Maximum 1 Light/Tractor) 4 $85.00 FRONT AXLE 72 TREAD SPACING FOR M5640SU Tie Rod End Extension Kits, requires (2) (Order from Parts Department) REAR AXLE SPACER KIT M9564 Rear Axle Spacer Kit 50 $ BLOCK HEATER (Available only from Parts) Block Heater (Order from Parts Department) TOOL BOX M9426 Tool Box 10 $ HAND GRIP (Right Fender) T Hand Grip (Order from Parts Department) M7601 or M7602 Valves for 2 nd position, includes 2 stack mounting studs. Do not fold ROPS with canopy. Rear Axle Spacer Kit provides 72 Spacing with AG tires on 2WD models. Page 9-19

21 M5640SUD-1 BALLAST BOX M8180 Three point Ballast Box 1280 lbs capacity with dry sand (13 cubic feet) 220 $ FRONT WEIGHTS, WEIGHT BUMPER AND BOLT KIT M8071 Suitcase Weight (105 lbs. Each) Requires M8070 or M8075 Weight Bumper and M8074 or M8073 Bolt Kit. M Weights, M Weights. 105 $87.00 M8070 M8075 Weight Bumper (85 lbs.) Standard on 2WD M5640SU. Includes Mounting Bolt Kit. Requires M8074 Bolt/Bar Kit. Weight Bumper (230 lbs. each) Optional (1-10 M8071 Weights) Requires M8076 Bolt Kit. 90 $ $ M8076 Bolt Kit - Bumper for M $57.00 M8074 M8073 M1059 Bolt/Bar Kit - Weight for M8070 One Kit per 1-8 M8071 Weights Bolt/Bar Kit - Weight for M8075 One Kit per 1-10 of M8071 Weights. Front Weight Bracket Kit (Loader Application) Requires M8074 Bolt/Bar Kit. Holds 1-8 M8071 Suitcase Weights when LA1002 Loader is detached. 7 $ $ $ REAR WHEEL WEIGHTS AND BOLT KIT (You must order both items.) M8126A Set of 2 (164 lbs. each) Requires LM8125A Bolt Kit for 1st Set. Use with 28" diameter Steel Dish Wheels. M8127B Bolt Kit use for 2nd and 3rd set of M8126A wts., one Bolt Kit per weight set. 328 $ $20.00 LM8124 Set of 2 (103 lbs. each) For Standard and Low Profile wheels. 1-3 Wts. per steel dish, 1-2 wts. per Cast Iron dish. Use with 24" or 26" steel dish wheels. Requires LM8125A Bolt Kit for first set of weights. 206 $ M8121A Bolt Kit for 2nd and 3rd Set of LM8124 Weights 3 $21.00 LM8125A Bolt Kit for use with 1st set LM8124 and M8126A wts. 6 $67.00 Maximum 3 weights per wheel. M8127B Bolt Kit is required to add 2nd and 3rd set of M8126A weights. Requires one M8127B per M8126A weight set. Up to 3 weights per wheel. Use M8121A Bolt Kit to attach 2nd and 3rd set of LM8124 weights. Requires one Bolt Kit per set of additional weights. Not compatible with 24 M-Series 4WD front wheels. Either M8070 or M8075 can be used as the option on M5640SUD models without loader. Not compatible with LA1002-5R2 Loader, use M1059. Page 9-20

22 M60 SERIES M5660SUH/M5660SUHD * * * EQUIPMENT IN STANDARD MACHINE & SPECIFICATIONS * * * DIESEL ENGINE Kubota V2403 Direct Injection 2.4L (148.5 cu. in.) 4 Cyl EPA Tier 4 Final Compliant Common Rail Electronic Fuel Injection Electronic Engine Management Constant rpm Management Turbocharged 45 Amp Alternator ROPS 12V 600 CCA Battery EXHAUST EMISSION CONTROL TYPE DPF System (Diesel Particulate Filter) HYDRAULICS / HITCH / DRAWBAR Open Center Gear Pump Max. Rated Engine Speed: 2600 rpm Power Steering: 6.1 gpm Impl. Flow: 10.6 gpm Total Flow: 16.5 gpm REMOTE VALVES (1) SCD (Self Canceling Detent) 3 POINT HITCH & DRAWBAR Cat II/I 3-point Lift Points: 4189 lbs (ASAE)@24 Behind: 3307 lbs Telescoping Lower Links Telescoping Stabilizers Swinging Drawbar - Straight POWER TAKE OFF (540) Live-Independent Hyd. PTO SAE 1 3/8 Six Spline Eng. rpm 540/540E Economy PTO Optional Provides Eng. rpm TRANSMISSION Eight Speed Fully Synchronized Transmission 8F/ 8R Hydraulic-Shuttle Planetary Final Drives Rear Differential Lock FRONT AXLE Hydrostatic Power Steering 2WD: Tubular Steel Beam Telecoping 4WD: Cast Iron, Bevel Gear 55 Deg FLUID CAPACITY Fuel Tank Capacity: 17.2 gal. Cooling System: 8.5 qts. Crankcase: 7.6 qts. Hydraulics/Trans: 50.7 qts. Front Axle 4WD: 6.9 qts. INSTRUMENTS Tachometer/Hour meter Oil Pressure Fuel Gauge Coolant Temperature TIRES AND WHEELS 2WD: Front 6.50 x 16 F2 Rear 14.9 x 28 R1 4WD: Front 8.3 x 24 R1 Rear 14.9 x 28 R1 OPERATOR PLATFORM Semi-Flat Deck with Hanging Pedals High Back Seat with Adjustable Suspension Color Coded Controls Cup Holder LIGHTING 2 Headlights - Tail lights 2 Hazard Flasher Lights w/ Turn Signals SAFETY EQUIPMENT 2-post, ROPS Certified Retractable Seat belt Flip-Up PTO Shield Safety Start Switches: Shuttle Lever Neutral PTO Off Electric Key Shut Off Parking Brake Turn Signals SMV Sign Model Specifications M5660SUH MX5660SUHD SAE Gross HP: 57.9 SAE Gross HP: 57.9 Engine Net HP: 56 Engine Net HP: 56 Max. PTO HP: 50 Max. PTO HP: 50 Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point. Complete revision August Page 9-21

23 M60 Series M5660SUH/M5660SUHD 2WD MODELS * * * STANDARD TRACTOR WITH STANDARD TIRES * * * M5660SUH 2WD Utility 2 Post Foldable ROPS Tractor 4189 lbs $25, M5660SUH 2WD TIRES AND WHEELS AG - BIAS REAR Weight Each MR8950* F-TIRE F2 Titan Tru Trac TT 63 lbs AMR8901B* R-TIRE R1 Firestone (SAT) II 255 lbs Additional Price With Tire Option FACTORY SUGG. LIST NUMBER FACT. NO. In Base Price In Base Price MR8950 F-TIRE F2 Titan Tru Trac TT 63 lbs AMR8565 R-TIRE R1 Firestone (SAT) II Cast 600 lbs AMXR8789 F-TIRE 9.5L-15 F2 BKT Pro Rib 75 lbs AMR8901B R-TIRE R1 Firestone (SAT) II 255 lbs AMXR8789 F-TIRE 9.5L-15 F2 BKT Pro Rib 75 lbs AMR8913B R-TIRE R1 Firestone (SAT) II 299 lbs AMXR8789 F-TIRE 9.5L-15 F2 BKT Pro Rib 75 lbs AMR8565 R-TIRE R1 Firestone (SAT) II Cast 600 lbs Add Add Add Add $ 1, $ $ $ 1, AG - RADIAL REAR AMXR8789 AMR8570 F-TIRE 9.5L-15 F2 BKT Pro Rib R-TIRE 420/70R28 R1W Alliance Farm Pro70 Cast 75 lbs 600 lbs Add $ 1, AMXR8789 AMR8577 F-TIRE 9.5L-15 F2 BKT Pro Rib R-TIRE 420/70R28 R1W Alliance Farm Pro70 75 lbs 255 lbs Add $ INDUSTRIAL AMXR8789 ALR8917 F-TIRE 9.5L-15 F2 BKT Pro Rib R-TIRE R4 Titan Ind Tractor Lug 75 lbs 267 lbs Add $ TURF ALR8708 AMR8979 F-TIRE 29x R3 Titan Turf R-TIRE 21.5L-16.1 R3 Firestone Turf&Fld 82 lbs 245 lbs Add $ ALR6818A AMR8541 F-TIRE LSW305R343 R3 Titan Grizz LSW 430 R-TIRE LSW R3 Grizz LSW S.TF lbs 261 lbs Add $ See Tire Section for Individual Tire Pricing and Information * Standard Tires For field installation, order (12) Spring Washers from Parts Not approved for Backhoe applications. Page 9-22

24 M60 Series M5660SUH/M5660SUHD 4WD MODELS * * * STANDARD TRACTOR WITH STANDARD TIRES * * * M5660SUHD 4WD Utility 2 Post Foldable ROPS 4387 lbs $30, M5660SUHD 4WD TIRES AND WHEELS AG - BIAS (Front may be Radial) Weight Each MR8798* F-TIRE R1 Bridgestone Farm Svc Lug M 98 lbs AMR8901B* R-TIRE R1 Firestone (SAT) II 255 lbs FACTORY NUMBER In Base Price Additional Price With Tire Option SUGG. LIST FACT. NO. In Base Price MR8798 F-TIRE R1 Bridgestone Farm Svc Lug M 98 lbs AMR8565 R-TIRE R1 Firestone (SAT) II Cast 600 lbs AMR8564 F-TIRE 280/85R20 R1W Alliance Farm Pro lbs AMR8901B R-TIRE R1 Firestone (SAT) II 255 lbs AMR8564 F-TIRE 280/85R20 R1W Alliance Farm Pro lbs AMR8565 R-TIRE R1 Firestone (SAT) II Cast 600 lbs AG - RADIAL AMR8564 F-TIRE 280/85R20 R1W Alliance Farm Pro lbs AMR8577 R-TIRE 420/70R28 R1W Alliance Farm Pro lbs AMR8564 F-TIRE 280/85R20 R1W Alliance Farm Pro lbs AMR8570 R-TIRE 420/70R28 R1W Alliance Farm Pro70 Cast 600 lbs INDUSTRIAL AMR8797 F-TIRE R4 Titan HD lbs ALR8917 R-TIRE R4 Titan Ind Tractor Lug 267 lbs TURF AMR8576 F-TIRE 31X R3 MULTI-TRAC TURF 77 lbs AMR8979 R-TIRE 21.5L-16.1 R3 Firestone Turf&Fld 245 lbs AMR8526 F-TIRE LSW R3 Grizz LSW Soft Turf 113 lbs AMR8541 R-TIRE LSW R3 Grizz LSW S.TF lbs See Tire Section for Individual Tire Pricing and Information * Standard Tires For field installation, order (12) Spring Washers from Parts Not approved for Backhoe applications. Add Add Add Add Add Add Less Add $ 1, $ $ 1, $ $ 1, $ $ (382.00) $ Page 9-23

25 M60 SERIES M5660SUH/M5660SUHD DEALER INSTALLED ACCESSORIES HYDRAULICS/HITCH/DRAWBAR HYDRAULIC REAR REMOTE VALVES M7610 SCD (Self Canceling Detent) 13 lbs $ M7611 FD (Float Detent) 13 lbs $ REMOTE VALVE LEVER KITS M7692 2nd Position Lever Kit 4 lbs $ M7693 3rd Position Lever Kit 3 lbs $ DRAWBAR CLEVIS M9534 Drawbar Clevis 12 lbs $85.00 TRANSMISSION DUAL SPEED PTO KITS M /540E Economy PTO 72 lbs $1, FRONT & REAR AXLE FRONT FENDER KIT (SWIVEL TYPE) M9290 Fender Mounting Kit 68 lbs $ Requires Plastic Fenders Not Compatible with Loader Applications Not Compatible with 2WD Tractors M9208 Plastic Fenders 7 lbs $ Includes two 14.9" wide Fenders Requires two (2) part # 3C Pre-Drilled Front Wheel Case Supports WIDE ROW FRONT AXLE KIT Tie Rod End Extension, Requires 2 Not Compatible with Loader Applications (SUH 2WD Only) (Order from Parts Department) REAR AXLE SPACER KIT M9564 Rear Axle Space Kit, adds 2 inches per side Provides 72" spacing with Ag Tires 60 lbs $ ROPS ACCESSORIES CANOPY E1134 E1136 E1138 REAR WORK LIGHT M7630 Deluxe Fiberglass Canopy Requires Mounting Kit Mounting Kit Work Light Set for Canopy (Optional 2-lights) 63 lbs $ lbs $ lbs $ Rear Working Auxilary Light (Maximum 1 Light/Tractor) 3 lbs $85.00 Page 9-24

26 M60 SERIES M5660SUH/M5660SUHD DEALER INSTALLED ACCESSORIES FRONT WEIGHT BRACKETS M8070 Weight Bumper (85 lbs.) Standard on 2WD Model Includes Mounting Bolt Kit Requires Bolt/Bar Kit Not Compatible with Loader 95 lbs $ M8075 Weight Bumper (230 lbs. each), Optional 223 lbs $ Up to 10 Front Suitcase Weights Requires Bolt Kit Not Compatible with Loader M1875A Front Weight Bracket (59lbs) for Loader Application 63 lbs $ Requires Bolt/Bar Kit Up to 7 Front Suitcase Weights Loader must be detached M1059 Front Weight Bracket Kit for Loader Application 57 lbs $ Requires M8074 Bolt/Bar Kit Up to 8 Front Suitcase Weights Loader must be detached FRONT SUITCASE WEIGHTS M8071 Suitcase Weight (105 lbs. Each) Requires Front Weight Bumper and Bolt/Bar Kit 94 lbs $87.00 FRONT WEIGHT BOLT/BAR KITS M8076 Front Bumper Bolt Kit for M lbs $57.00 M8074 M8073 Bolt/Bar Kit for M1875A and M8070 One Kit per 8 Front Suitcase Weights Bolt/Bar Kit for M8075 One Kit per 10 Front Suitcase Weights 8 lbs $ lbs $52.00 Page 9-25

27 M60 SERIES M5660SUH/M5660SUHD DEALER INSTALLED ACCESSORIES BALLAST REAR WHEEL WEIGHTS LM8124 M8126A Rear Wheel Weight (103 lbs. each) Set of 2 Weights, Maximum of 3 Sets Requires Rear Wheel Bolt Kit Use with 24" or 26" Wheels Not Compatible with Turf Tires Wheel Weight Kit (164 lbs. each) Set of 2, Maximum of 3 Sets Requires Rear Wheel Bolt Kit Use with 28" Wheels 206 lbs $ lbs $ REAR WHEEL WEIGHT BOLT KITS M8119B Bolt Kit for 1st Wheel Weight Kit on Cast Dish Wheels 6 lbs $27.00 LM8125A Bolt Kit to 1st Wheel Weight Kit on Steel Dish Wheels 5 lbs $67.00 M8127B Bolt Kit use for 2nd and 3rd Set of M8126A Weights 6 lbs $20.00 Required for 2nd & 3rd Set on ALL Steel Dish Wheels Required for 2nd Set on Cast Dish Wheels M8121A Bolt Kit for 2nd and 3rd Set of LM8124 Weights One Bolt Kit per Weight Set 8 lbs $21.00 BALLAST BOX M8180 Ballast Box - 3-Point Mount 220 lbs $ lbs Capacity with Dry Sand (13 cu. ft.) ADDITIONAL ACCESSORIES BLOCK HEATER Block Heater (Order from Parts Department) FLOOR MAT 3C GRILL GUARD M1876A HAND GRIP T REPLACEMENT ROPS TBD Rubber Floor Mat Order (7) fasteners for mounting Grill Guard Kit Compatible with M8075 Front Bumper Weight Hand Grip RH Replacement ROPS - Field Installation Required (Order from Parts Department) 57 lbs $ (Order from Parts Department) (Order from Parts Department) Page 9-26

28 M60 SERIES M5660SUH/M5660SUHD Front End Loaders Front Loader (2 Lever Type Quick Coupler) Includes Mounting Kit, Loader Valve and Joystick, Parking Stands, and 2 Lever QA Coupler DOES NOT INCLUDE BUCKET or GRILL GUARD, must be ordered separately FRONT END LOADER LA1154SU 1330 lbs $5, LOADER ACCESSORY KITS 3RD FUNCTION VALVE M7949 3rd Function Valve 56 lbs $ BUCKETS / CUTTING EDGES ALL 2-Lever Type QA M Lever Quick Attach 400 lbs $ M " Bucket High Capacity, 2 Lever QA 400 lbs $ For Light Material Use L " 4-in-1 Bucket 675 lbs $2, Requires 3rd Function M Hay Grapple Bucket 1090 lbs $3, Tines, 2-Hyd. Cylinders, 2 Lever Quick Coupler Requires 3rd Function Valve Requires 2-Hyd. 1/2 QA couplers,.375 fittings (Obtain Locally, i.e. Pioneer, Parker, or Flat Face) BUCKET ACCESSORIES M1057 Bucket Tine Kit for 72" 2 Lever QA Bucket 90 lbs $ BALE SPEARS M1804 Bale Spear 2 Lever Type QA 195 lbs $ PALLET FORK FRAME / PALLET FORKS M1809 Pallet Fork Frame 2 Lever QA 200 lbs $ Requires 42" or 49" Forks K " Pallet Forks 196 lbs $ K " Pallet Forks 218 lbs $ Page 9-27

29 M60 SERIES Backhoes M5660SUH/M5660SUHD BACKHOE & ACCESSORIES M4509 Backhoe, 9ft digging depth Includes Flip-Type Grousers Requires Mounting Kit and Bucket 1960 lbs $10, M4509V Backhoe, 9ft digging depth Includes Auxilary Valve and Flip-Type Grousers Requires Mounting Kit and Bucket 1960 lbs $11, BACKHOE MOUNTING KIT M4505 BACKHOE ACCESSORIES M4745 M4014 M4015 M4716 RUBBER FLIP PADS L9453 Backhoe Sub frame Kit 575 lbs $1, Bucket Quick Coupler Hydraulic Thumb Kit Mechanical Thumb Kit Fixed Pin Kit For use with additional buckets using M4745 Quick Coupler Requires 1 Pin Kit per Additional Bucket 70 lbs 150 lbs 155 lbs 8 lbs $ $1, $ $ Rubber Flip Pads 21 lbs $79.00 M4509 / M4509V BUCKETS L5415A 12" Bucket (1.43 cu. ft. Struck / 1.83 cu. ft. Heaped) Not Compatible with Thumb Kits, unless Quick Coupler is installed on Backhoe 140 lbs $ L5416A 16" Bucket (1.98 cu. ft. Struck / 2.56 cu. ft. Heaped) Not Compatible with Thumb Kits, unless Quick Coupler is installed on Backhoe 154 lbs $ L5418A 18" Bucket (2.25 cu. ft. Struck / 2.98 cu. ft. Heaped) 162 lbs $ L5424A 24" Bucket (3.07 cu. ft. Struck / 4.32 cu. ft. Heaped) 185 lbs $ M Bucket (4.04 cu. ft. Struck / 6.14 cu. ft. Heaped) 257 lbs $1, Not Compatible with Thumb Kits, unless Quick Coupler is installed on Backhoe M Bucket (4.48 cu. ft. Struck / TBA cu. ft. Heaped) NOTE: Special order due to low sales volume 269 lbs $1, Page 9-28

30 M60 SERIES M5660SUH/M5660SUHD Approved Attachments Land Pride Rotary Cutters Land Pride Dish Harrows RCR1872 DH2572 RCR1884 DH2596 RCF2072 RCF2084 Land Pride Quick Hitches RCR2672 QH15 (Cat. I) RCF2772 QH20 (Cat. II) RCF2784 RCF3010 (Pull Type) Land Pride Hydraulic Reservoir System RCF3010 (Semi-Mount) HRS18 RCF3696 (Pull Type) HRS23 RCF3696 (Semi-Mount) HSR3025 RC2512 (Pull Type) RC4015 Land Pride Grapple Claw SGC1560 Land Pride Rotary Tillers SGC1572 RTR1274 SGC1584 RTR1574 Page 9-29

31 M7040SUH / SUHD DIESEL ENGINE Model # V3307 Turbo Charged with EGR Valve 4 Cyl. 203 cu. in Net Eng. HP + 64 PTO 2600 Eng. rpm EPA Emission Certified Interim Tier IV 12V CCA Battery Charging Output 45 amps HYDRAULICS / HITCH / DRAWBAR Open Center--Gear Type Dual Pumps 6.1 gpm Power Steering 11.6 gpm Remotes / 3 Pt. Hitch 17.1 gpm Total Cat II/I 3-point Hitch with rigid link ends First Remote (SCD) with self canceling detents Position Control (no draft control) At lift Point 4200 lbs. 24 Behind 3307 lbs. Stabilizer Swinging Drawbar FRONT AXLE 2WD: Hydrostatic Power Steering Tubular Steel Beam Adj. (Telescoping) Tread Spacing 4WD: Bevel Gear Cast Iron Adj. (Rim) Tread Spacing + Manufacturer estimate. * * * EQUIPMENT IN STANDARD MACHINE * * * DRIVE TRAIN Four Speed Fully Synchronized 8F/ 8R Hydraulic Shuttle 8F/ 8R Speeds Planetary Final Drives Rear Differential Lock FLUID CAPACITY Fuel Tank (ROPS) Cooling System Crankcase Transmission and Hydraulics Front Axle INSTRUMENTS Tachometer/Hour meter Oil Pressure Fuel Gauge Coolant Temperature 18.5 gal. 8.5 qts qts gal. 9.0 qts. POWER TAKE OFF Live-Independent Hyd. PTO SAE 1 3/8 Six Spline Eng. rpm LIGHTING 2 Headlights - Tail lights 2 Hazard Flasher Lights with Turn Signals SAFETY EQUIPMENT 2-Post Foldable ROPS with Retractable Seat Belt Flip-Up PTO Shield Safety Start Switches (Shuttle Lever and PTO Lever) PTO Operator Presence Control (OPC) Alarm 10 seconds Wet Disc Brakes Parking Brakes Turn Signals SMV Sign TIRES AND WHEELS 2WD: Front 9.5L 15 F2 Rear R1 4WD: Front R1 Rear R1 Tool Box - Standard M7040SUH* 2WD TRACTOR (Hydraulic Shuttle) with 2 Post Foldable ROPS 4675 $ 25, M7040SUHD* 4WD TRACTOR (Hydraulic Shuttle) with 2-Post Foldable ROPS 4805 $ 30, Page 9-30

32 M7040SUH / SUHD M7040SUH* TIRES AND WHEELS (priced per piece) Price with Tire Option SUGG. SUGG. LIST FACT. NO. AMXR8789** F-TIRE 9.5L-15 F2 BKT PRO RIB 75 $ $ 25, AMR8932C** R-TIRE R1 AG Steel Bias 319 $ 1, AMXR8789 F-TIRE 9.5L-15 F2 BKT PRO RIB 75 $ $ 26, AMR8935D R-TIRE R1 DURA TORQUE TL CST 620 $ 1, AMXR8789 F-TIRE 9.5L-15 F2 BKT PRO RIB 75 $ $ 25, AMR8938 R-TIRE R3 TF Steel Bias DA 310 $ 1, AMR8980B F-TIRE F2 Champ Guide Grip TL 75 $ $ 25, AMR8932C R-TIRE R1 Firestone (SAT) II 310 $ 1, AMR8980B F-TIRE F2 Champ Guide Grip TL 75 $ $ 26, AMR8935C R-TIRE R1 Firestone SAT II Cast 310 $ 1, ALR8708 F-TIRE 29x R3 TF 73 $ $ 24, AMR8979 R-TIRE 21.5L-16.1 R3 TF Steel Bias DA 245 $ AMR8545 F-TIRE 27X I1 65 $ $ 24, AMR8979 R-TIRE 21.5L-16.1 R3 TF Steel Bias DA 245 $ ALR6818A F-TIRE LSW305R343 R3 TF STL RADAL AA 116 $ $ 25, AMR8541 R-TIRE LSW R3 6PLY SFT TRF ST 261 $ 1, ** Standard tires.. Recommended for loader applications, increases base weight by approximately 600 lbs. For field change to the AMR8935A Cast Iron dish, it will require 16 Shoulder Lug Nuts. Order (16) 3A Shoulder Lug Nuts from Parts. Not approved for loader applications. Not approved for Backhoe application. Low profile turf tires. Page 9-31

33 M7040SUH / SUHD M7040SUHD* TIRES AND WHEELS (priced per piece) Price with Tire Option SUGG. SUGG. LIST FACT. NO. AMR8955C** F-TIRE R1 6-PLY BIAS DURA TRQ 130 $ $ 30, AMR8932C** R-TIRE R1 AG Steel Bias 319 $ 1, AMR8955C F-TIRE R1 6-PLY BIAS DURA TRQ 130 $ $ 31, AMR8935D R-TIRE R1 DURA TORQUE TL CST 620 $ 1, MR8956 F/TIRE R1 6P T/T AG 98 $ $ 29, MR8924B R-TIRE R1 6PLY BIAS 250 $ MR8954B F-TIRE R3 TF 4PLY AL $ $ 30, AMR8938 R-TIRE R3 TF Steel Bias DA 310 $ 1, AMR8536 F-TIRE 29x R3 TF StL 77 $ $ 29, AMR8979 R-TIRE 21.5L-16.1 R3 TF Steel Bias DA 245 $ AMR8526 F-TIRE LSW NHS R3 TF Steel Bias AA 113 $ $ 30, AMR8541 R-TIRE LSW R3 6PLY SFT TRF ST 261 $ 1, AMR8993 F-TIRE 14x17.5 R4 IN Steel Bias AA 168 $ $ 30, ALR8917 R-TIRE R4 IN Steel 267 $ ** Standard tires.. Recommended for loader applications, increases base weight by approximately 600 lbs. Requires 16 Shouldered Lug Nuts, P/N 3A for field installation. However, tractors ordered with the cast iron dish wheels will have the shouldered Lug Nuts installed by KTC assembly. For field installation, requires (16) Spring Washers. Order from Parts. Not approved for Backhoe application. Page 9-32

34 M7040SUH / SUHD Dealer Installed Options OPTIONAL EQUIPMENT HYDRAULIC VALVES (Either valve fits selected lever kit) M7610 SCD (Self Canceling Detent) 15 $ M7611 FD (Float Detent) 13 $ LEVER KITS M7692 Second Position Lever Kit 4 $ M7693 Third Position Kit 5 $ DRAWBAR CLEVIS M9534 Drawbar Clevis 10 $85.00 CANOPY E1134 Deluxe Fiberglass Canopy Requires E1136 Mounting Kit 63 $ E1136 Mounting Kit (Brackets/Hardware/Instructions) 30 $ E1138 Work Light Set for Canopy (Optional 2-Lights) 10 $ REPLACEMENT ROPS SFM-F70SUH Replacement ROPS 63 $1, REAR WORK LIGHT M7630 One Light (Maximum 1 Light/Tractor) 4 $85.00 FRONT AXLE 72 TREAD SPACING FOR M7040SUH Tie Rod End Extension Kits, requires (2) REAR AXLE SPACER KIT M9564 Rear Axle Spacer Kit (Order from Parts Department) 50 $ BLOCK HEATER (Available only from Parts) Block Heater (Order from Parts Department) TRAILER ELECTRICAL COUPLER M Pin Electrical Coupler 5 $73.00 HAND GRIP (Right Fender) T Hand Grip (Order from Parts Department) DOWN EXHAUST MUFFLER M7633 Muffler Kit 19 $ Do not fold ROPS with canopy. Rear Axle Spacer Kit provides 72 Spacing with AG tires. Page 9-33

35 M7040SUH / SUHD Dealer Installed Options TELESCOPING LOWER LINK KIT M9501 Telescoping Lower Link Kit for 3 Pt. Hitch 58 $ BALLAST BOX M8180 Three point Ballast Box 1280 lbs capacity with dry sand (13 cubic feet) FRONT WEIGHTS, WEIGHT BUMPER AND BOLT KIT M8071 Suitcase Weight (105 lbs. Each) Requires M8070 or M8075 Weight Bumper and M8074 or M8073 Bolt Kit. Capacity: M Weights, M Weights. M8075 Weight Bumper (230 lbs. each) Optional (1-10 M8071 Weights) Requires M8076 Bolt Kit. Standard on 2WD M7040SUH 220 $ $ $ M8076 Bolt Kit - Bumper for M $57.00 M8074 M8073 M1059 Bolt/Bar Kit - Weight for M8070 One Kit per 1-8 M8071 Weights. Bolt/Bar Kit - Weight for M8075 One Kit per 1-10 of M8071 Weights. Front Weight Bracket Kit (Loader Application) Requires M8074 Bolt/Bar Kit. Required in Loader applications to mount 1-8, M8071 Suitcase Weights when LA1002 Loader is detached. REAR WHEEL WEIGHTS AND BOLT KIT (You must order both items.) M8126A Set of 2 (164 lbs. each) Cast Iron Requires LM8125A Bolt Kit for 1st set. Use with 28" or 30 diameter Steel Dish Wheels. M8119B Bolt Kit for 1st set of M8126A weights on Cast Iron Wheels 70 $ $ $ $ $27.00 M8127B Bolt Kit for 2nd and 3rd sets of M8126A 6 $20.00 LM8124 Set of 2 (103 lbs. each) For Standard and Low Profile units. Cast Iron. Up to 3 Wts./Wheel. Use with 24" and 26" Steel Center Wheels. Requires LM8125A Bolt Kit for first set of weights. 206 $ M8121A Bolt Kit for 2nd and 3rd sets of LM8124 wts. $21.00 LM8125A Bolt Kit for 1st set of LM8124 and M8126A wts. 6 $67.00 Maximum 3 weights per wheel. M8127B Bolt Kit is required to add 2nd and 3rd set of M8126A weights. Requires one M8127B per M8126A weight set. Up to 3 weights per wheel. Use M8121A Bolt Kit to attach 2nd and 3rd set of LM8124 weights. Requires one Bolt Kit per set of additional weights. Not compatible with 24 M-Series 4WD front wheels. Either M8070 or M8075 can be used as the option on M5640SUD/M7040SUD/M7040SUH/SUHD models. M8119B Bolt Kit, required to mount first set of M8126A weights on cast dish wheel. Page 9-34