More power for you who works in the forest.

Transcription

1 GB 1050 F

2 More power for you who works in the forest. The machines shown in the pictures might have certain extra equipment. Why wasting time for short stops, when every second is costly? With the Powershift gearbox you shift gear without having to stop, even when the machine is fully loaded. Your average speed is increased, and you can drive at low rev., which is both economical and comfortable from the ergonomical point of view.. The cab is quiet and comfortable, and you have excellent short range visibility. All wheels and the space down to the waist are visible without you requiring any effort. 2 Flexibility is important when advancing in varying terrain. The 1050 F is flexible and steady even with full load.

3 1050 F, Technical Data Engine Cummins QSB 4 cyl, turbo-charged, Intercooler, common rail, EC step 3. Capacity (litres) 4,5 Toprque (Nm) at speed Power output kw (HP) at speed More than 600, between r.p.m. 120 (164) at 1900 r.p.m., (speed limited to 1900 r.p.m.). Cooling system Hydraulically driven fan with automatic reversing, governed by GreControl. Fuel tanks 123 litres. Filling via quick coupling. Electrically driven pump with automatic shut-off. Transmission/Steering/Breakes Tractive force (kn) More than 120. Hydrostatic drive Gearbox Bogies Differential locks Hub reduction Steering Variable transmission governed by GreControl. Powershift 2-stage gearbox. 1st gear 0 9,1 km/h, 2nd gear 0 25 km/h. Cast iron gearwheel bogies. Disengaging vehicle drive. Individually controlled with 100 % locking on each axle. On every wheel Servo-steering. Electric proportional terrain steering in separate lever. Steering torque (knm) 42 Steering angle +/- 44 Breakes Other Electro-hydraulic brakes. Four oil-immersed multiple-disc brakes in front and rear differentials. GreControl for settings, fault detecting and warning by fault message. Hydraulics Working hydraulic Load detecting output controlled system. Pump (cc) 105 Variable. Working pressure (MPa) 23,5 Cooling, fi ltering Hydraulically driven variable fan with reversing action for blowing-off radiators governed by GreControl Separate pump for cooling and fi ne fi ltering. Return fi lter. Fine fi lter. Filling Elektrical via fi lter, automatic stop. Crane/Crane Control Crane Loglift 59 F Reach length (m) 7,2 Gross lifting torque (knm) 78 Control System Gre-Control, 6 operator selecting altennatives, fault detecting. Electrics Voltage (V) 24 Generator (A) 110 Battery Working lights 2x100 Ah Xenon 15 pcs Load carrier Cross sectional area (m 2 ) 4,1/3,3 and 4,3/3,5 respectively Payload (tons) 10,5 Other Hydraulically controlled folding headboard. 4 bunks with removable stakes. Middle and rear bunk variably adjustable. Gremo We reserve the right to carry out changes in specifi cation and manufacture. All measures and values are approximate and refer to a machine equipped to standard.

4 Gremo has many things in mind. What we deal with represents the most valuable assets in this world. Forest and People. Our challenge is to make people feel comfortable with our machines, but also to develop, manufacture and sell forest machines causing least possible damage in the forest without renouncing efficieny and performance. For 20 years we have been working the Gremo way. This means, simply speaking, that our designers are sitting under the same roof as workshop, service staff and sales department. The result is a tight and close dialogue between all people involved. Invaluable for the work on improvements and super to make theory function in practice. The other important part in our way of working is the customer. Not only the obvious fact that we do our best to create best possible benefit for the customer. No, one better, the customer testifies the result of our work. And as our customer often visit us and our production plant, we get our marks direct on site. Incredibly valuable for us and furthermore for all people working with a Gremo machine. D When we develop our forestry machines we always bear environment in mind. Top performance and efficiency have to be combined with minimum damage on our natural environment.the forest not only is an industrial location, it is in the highest degree a living place full of adventure, play and recreation.for both big and small, people and animals. We must never forget that.

5 A new sovereign is born. Meet the Gremo 1050 F. The Gremo 1050 F is a further development of the successful forwarder 950 F, for more than a decade leading sales on the Swedish market. With the 1050 F we jump a wee bit higher up in weight class and loading capacity (10.5 tons). We do this to improve economy and ergonomics for you as a user. Under the bonnet of the 1050 F works a powerful Cummins engine with common-rail technique. The engine complies with the step-3 demands and disposes of more than 600 Nm torque over a wide speed range. At the same time as the engine features these power characteristics it is also light, compact and silent. D Optimized weight distribution, low point of gravity and perfectly balanced bogies supply full control in all situations. It goes without saying that this forwarder is also equipped with our own-developed software GreControl. Gre- Control offers many advantages such as reduced fuel consumption, less maintance and less noise. GreControl can also, if required, control the speed of the hydraulically driven fan and every 30 minutes reverse its rotation for blowing off the radiators. Now what is 1050 F s favourite occupation? Thinning and log forwarding are obvious tasks for the flexible and powerful forwarder. Wetland is no obstacle just put on the bogie trackbands both front and rear, and the machine advances without having any problems. The machines shown in the pictures might have certain extra equipment. 3

6 / (Wide headboard) (cranab) 3452 (Loglift) 2237 (Narrow headboard) (600 tyres) 2300 (short front carriage) 2550 (long front carriage) 2580 (600 tyres) (600 tyres) 8140 (short front carriage + short rear carriage), 8575 (short front carriage + long rear carriage) 8390 (long front carriage + short rear carriage), 8825 (long front carriage+ long rear carriage) Weight with basic equipment: kg. Fuel tank: 123 liter F, Equipment Vehicle, standard Cabin, standard Options Compressor s hose reel Loglift 59, 7,2 m Surveillance camera front/rear, colour screen Grapple, Cranab G 28 Cruise control Nokia 710x22,5 Forest King SF Wheel steering Engaging and disengaging vehicle drive Interval wipers front and rear, touch button for one wipe (controls also optional lateral wipers) Bogielift Trelleborg 600, 650 or 710 Nokia TRS 600 or 700 Loglift 59, 8,5 m Cranab FC 80, 7,0 m Cranab FC 80, 9,2 m Cranab FC 80 9,2 m Integral/MPB Boom damper Indexator slewing damper MPB Grapple, alternative make Alternative frame length Fixed headboard Hydraulic ladder 2 Tool compartments, with special tools Xenon lights, 15 off in total, incl. 1 off in rear frame and 2x2 off low lateral lights Electric pump with auto stop and quick coupling for fuel 24V socket at fuel tank Electric pump with auto stop for hydraulic oil Opening side window (emergency exit) Safety panes 12 mm ACC air condition plant Prepared for telephone incl. aerial IQAN Experience with GreControl programme Selecting boom pump flow rates. 6 off adjustable driver s programme Tripmeter/speedometer. Alarm and fault detector. Fine filter för particle/water separation in hydraulic oil Sunshade panel front Hydraulically operated folding headboard Rear mirror Bunks, 4 with removable stakes Diesel oil heater Wear irons for bogie cases Tow hooks front and rear Sprinkler equipment, 2 off hand extinguisher Road transport equipment (LGF plate, Sun curtain on top of the rear window Air-cushioned, electrically heated drivers seat, safety belt, neck rest Electrically braked seat rotation Mini levers Radio/CD, 4 loud speakers 12V and 24V sockets in instrument panel Sun curtains Lateral wipers Drivers seat, ventilated Drivers seat, tilting Drivers seat, damped in one alternatively two directions DASA operation data collecting and forwarder reporting, GPS Electric tilting of cab Boom jib lights 2 off, Xenon Extra Xenon lights Prepared clamp bunk, electric-hydraulic Winch 3 alternatively 6 tons, enclosed in rear frame Bogie track chains/anti-skid chains Manual pump for tilting of cab We reserve the right to carry out changes in specification and design. All measures and values are approximate and refer to a machine equipped to standard. Gremo Waist lock, automatically actuated

7 You can choose between different powerful booms. Here you can see the Cranab FC 80 with 9.2 m reach and equipped with the pendulum movement damper MPB. Hydraulically operated headboard supplying extremely good vista, even with fully angled machine. Wood bunks and headboard are available in two different widths. The bunks have removable and locking load stakes. The two rear bunks are infi nitely adjustable for easy adjustment to the assortment. The large loading area offers increased profi tability. Two alternative frame lengths for adjustment to the varying range of goods. The frame section behind the differential is also available in two different lengths.

8

9 Gremo 1050 F The Gremo 1050 F is a smart creature. And we have designed it having you in mind. Working in a 1050 F should be a pleasant experience. Even outside the cab. You need not to worry about overheating. You would not have to be an acrobat to enter the forwarder. You would not have to require an escort car for accommodating tools and important equipment. No, in Gremo s world things are designed to function well. Our believe is that, if things function well even the small ones it will convey the feeling that the working day proceeds better and faster. This spread shows some smart details creating better fl ow during your working day.

10 The short and compact engine section means shorter total length with load, which in turn means increased fl exibility. Short engine and tank hood together with long way downward reaching window panes allow for excellent short range visibility. To avoid dipping the nose into the ground in steep terrain the machine is designed with large ramp angle. Light and powerful Cummins engine. In order to save fuel the speed is limited to r/m. We promise that is quite suffi cient! High torque available over a wide speed range. Even the boom can be run fast at low speed. GreControll controls the heat release and governs the speed of the hydraulically driven cooling fans subject to the cooling requirements. GreControl also initiates blowing-off the radiators every 30 minutes by reversing the fan. Strong bumper guards accomodate the Gremo tool box. Our most popular option: The bogielift, reduces the turning radius, increases the maneuverability and facilitates driving on rough ground with a couple of chains. The waist lock holds the vehicle with the grab full of timber even empty and with fully angled machine. This means you can pick timber even under diffi cult conditions.

11 Our top position is not accidental. The machines shown in the pictures might have certain extra equipment. For more than ten years we have been number 1 in the 8-10 tons class.that is not accidental. Hard and long work is behind the success. The same hard work lies behind all our forest machines, and our ambition is to belong to the absolute top irrespective of which of our machines you choose. It is our ambition that it should be easy to own and operate a Gremo. For this reason many components in our machines are in common (as long as it does not affect the performance). This simplifies things for machine owners, service people and secondhand trade. Safety is important for us. For this reason a surveillance camera is standard for our machines. For safety reasons we have arranged a cab door also on the righthand side. 2

12 Made by XXL Printed by Hyltebruks Tryckeri You are never alone Gremo AB Box 44 SE Ätran Tel. +46 (0) Fax +46 (0) Gremo , version 2