WHEN LIVES ARE IN THE BALANCE AND SECONDS COUNT

Transcription

1 100' Aerial Ladders WHEN LIVES ARE IN THE BALANCE AND SECONDS COUNT

2 HP 100 Aerial The E-ONE HP 100 is able to arrive first on the scene with everything necessary for fast action when the extra reach of a 100 aerial is needed. The HP 100 s short wheelbase and tight turning radius make for easy maneuvering in traffic. While the crisscross, under-slung jacks contribute to a low center of gravity, they also deploy in an industry leading time of less than 40 seconds with only a 12' spread. Ample storage compartments allow quick access to all gear. With a 500-gallon water tank, this first responder is ready to fight the moment it arrives on scene. As for aerial safety, the HP 100 has an industry leading safety margin of 2.5 to 1, and maintains 2 to 1 even while flowing water. The HP 100 s body is available in a traditional center hosebed or the sought after SideStacker. We also offer a truck company body option, which makes the HP 100 a valuable asset to any department. HP 100 Jack Spread If you can open the doors.you can set the jacks. Aerial rated at 550-lbs. (500-lbs. firefighters and 50-lbs. equipment) wet or dry 11' - 9" overall height The HP 100 offers exceptional stability. The apparatus can setup on a 12% slope and perform operations without reductions in performance capabilities. Independent stabilizer controls permit easy set-up on uneven terrain. The integral torque box efficiently transfers loads to the ground. Cyclone II chassis with integral torque box frame. Medium-length cab 220" wheelbase without pump and 230" with pump

3 Super Tiller Aerial rated at 550-lbs. (500-lbs. firefighters and 50-lbs. equipment) wet and dry. The E-ONE Super Tiller with V-Max TM Cab is a 100 ft. tillered aerial ladder boasting a 500-lbs. tip-load at the end while flowing water in all positions. This feature is even more impressive when customers learn it sits on a single lb. rear tractor axle, which enhances maneuvurability on tight streets. Standard nozzle auto-store feature Angled tip for better driver visibility while stowed Single set of outriggers with 17' - 6" spread Standard run-under protecttion system 11' - 3" overall height V-MaxTM Cab is designed for optimal visibility and has an enclosed flip up buddy-seat for driver training. 380" tractor axle to tiller axle California legal single rear axle rates at lbs. Standard short jack system permits confined space deployment 140" tractor wheel base for maximum turning performance

4 CR 100 Aerial All-Extruded Aluminum Welded Construction Using 6061-T6 aluminum-alloy extrusions achieves a high strength-to-weight ratio resulting in an extremely strong aerial ladder. The aluminum ladder is corrosion-resistant for many years of service. Ladder sections are K -braced for added strength. Climbing rungs have an integral slip-resistant surface eliminating the need for rubber rung covers. The swirled, natural finish requires little maintenance and painting of the aerial is not required. Welds and associated ladder assemblies are easily inspected. Aerial rated at 800-lbs. (750-lbs. firefighters and 50-lbs. equipment) dry and 550-lbs. wet ISO Compliant Ladder Load Big ladder loads are not a problem for the CR 100. If tip-load and low-angle performance top your list of must haves, our CR 100 with an impressive 750-lbs. capacity for firefighters is your aerial. It utilizes our famous integral torque box and narrow stabilizer spread to make your job easier while holding heavier loads. Cyclone II chassis with integral torque box frame. Medium-length cab 11' - 10" overall height with SideStacker and no pump; 12' - 1" overall height with center hosebed Another E-ONE exclusive, the integral torque box frame has no rival in the industry. With a Resistance to Bending Moment (RBM) rating of in lbs. ( Nm), the E-ONE torque box frame. The all-welded, structural steel torque box frame with internal gussets relieves ladder stress loads more efficiently without passing undue stresses into the apparatus body and cab. Integral under-slung jack assemblies below the torque box with the high-strength, lightweight aluminum aerial provides a low center of gravity for improved road handling. Waterway plumbing through the torque box is constructed of stainless steel. Jack spread of 13'- 8" with no pins

5 When lives are in the balance and seconds count For a dealer nearest you contact us at or call A Subsidiary of Federal Signal Corporation E-ONE, Inc