Plus. think ahead. Semi-mounted reversible ploughs.

Transcription

1 EN think ahead Plus Semi-mounted reversible ploughs Intelligence is valued... n manoeuvrability and soil adaptation n easy to set up and comfortable to use n long life span thanks to its robust construction and the plus hardening process More information is available online

2 Ploughs for successful cultivation Ploughing today The plough is the symbol of agriculture. Along with nurturing, fertilisation and crop protection, soil cultivation is crucial for successful crop production. Sustainability and efficiency are the decisive factors by which agricultural technology will be judged in the future. Sustainable soil cultivation, increased productivity and a design conceived with a view to high profitability are all desired. In addition to conservational cultivation and alternative sowing methods, the use of modern ploughs remains of central importance for yield and therefore for successful soil cultivation. Vogel & Noot is among the leading suppliers in this field. As the largest manufacturer within the EU, we have played an active role in the development of modern ploughing technology. VN ploughs are characterised by robust technology, high quality of work, optimal adaptation to local requirements and the highest possible levels of cost-effectiveness. 2

3 The right method is crucial The right choice of soil cultivation method is critical to success. In spite of the efforts of some proponents of mulch and direct sowing, conventional sowing using ploughs remains widespread and is in certain conditions the only successful method of sowing. As a result, the yieldguaranteeing function of the plough is highly valued by many farms. An overview of the advantages of conventional soil cultivation that are relevant in practice: Effective mechanical weed control by depriving them of light, containment of weed growth at field margins (especially in small fields and areas exposed to the wind, since it is often not possible here to use total herbicides at the right time) Soil warms up faster and is better aerated, giving higher yields of crops requiring warmth Soil warms up faster and is better aerated, giving higher yields of crops requiring warm destitute cultures The only soil cultivation option in constantly wet conditions Reduced risk of infection of subsequent crops by fusaria, because the residue of the previous crop is entirely removed, leading to fewer mycotoxins in the harvest Soil is enriched with oxygen, speeding up reactions in the ground Mechanical control of soil pests sensitive to UV light Mechanical control of snails and mice by breaking up the "green bridge" The plus semi-mounted plough range plus model Hektor Hektor Vario Herkules Heros Tractor kw/hp max ( ) ( ) ( ) ( ) No. of furrows 5- furrow 6- furrow 7- furrow 8- furrow 9- furrow ( ) 10- furrow 11- furrow 12- furrow 13- furrow ( ) Furrow width mechanical hydraulic Stump-jump system Shearbolt Hydraulic, fully automatic On-land model Information in brackets ( ) applies but with restrictions. All specifications and figures are subject to change. Which plough for which tractor? kw hp plus model Hektor Hektor Vario Herkules Heros 5-furrow 7-furrow 6-furrow 8-furrow 6-furrow 7-furrow 9-furrow 7-furrow 8-furrow 8-furrow 9-furrow 9-furrow 10-furrow 11-furrow 12-furrow 13-furrow 3

4 plus benefits to bring you success Years of experience in plough production and a global market presence Since its foundation in 1872, Vogel & Noot has been manufacturing plough components. In 1922, Vogel & Noot became the first company to mass produce complete ploughs. This experience, which now -als more than 90 years, has culminated in today's plus plough range, one of the most modern and versatile plough ranges on the market. The global marketing of the plus ploughs demands constant development and adaptation to ever-changing requirements. Featuring the latest technology and high quality materials, the plus ploughs provide the basis for profitable crop cultivation. Durable wearing parts As manufacturers of wearing parts for the cultivation industry, Vogel & Noot can look back on a history spanning decades. Continual advances in materials and production technology as well as our expertise in heat treatment are the basis for achieving the highest possible quality in Vogel & Noot wearing parts for ploughs. plus hardening process Carbon in its purest form, diamond, is the hardest naturally occurring substance. A hardening process involving the introduction of carbon into the steel is used to increase the hardness and durability of plus wearing parts. Vogel & Noot uses a unique hardening process to achieve a very high level of hardness on the front of components, such as the moulding board to produce the optimum resistance to wear. The back remains relatively soft but at the same time extremely tough and impact resistant. This results in unique plus advantages: Longer service lives High impact resistance Less traction required Reduced fuel consumption Less sticking as a result of smoother surface Front Back Hard harder Hardface Wearing parts with armoured hard metal the high-end solution for all major wearing plough parts such as shares, chisels, landside and manure skimmers. Hardface wearing parts are extra hard and resistant to deformation. This ensures that they last an incredibly long time and continue to work well and save energy throughout their service life. 65 Other Boron steel 4 50 Hardness in HRC VN Triplex Plate thickness in mm

5 Testimonials Cultivate large areas fast: this demands efficient ploughing, reliable operation and high material quality. VN plus semi-mounted reversible ploughs are impressing our customers. Mezort Zrt Mezort Zrt farm Sárvár, Szombathely and Mosomagyaróvár, Western Hungary Farm size: approx. 19,000 ha The Western Hungarian farmer cultivates approx. 10,000 ha per year with a total of 8 Vogel & Noot plus Hektor semi-mounted reversible ploughs. His main crops are wheat, barley, maize and alfalfa, with the ploughs mainly being used for maize cultivation. "VN machines are very high quality and offer a great price/performance ratio" says the enthusiastic farmer. He also uses a wide selection of products from the Vogel & Noot range: semi-mounted cultivator TerraTop M 500, VibroCult 610 and mulcher SA/L 160, TST 600 Hydro and TST 460 Hydro. Mezort Zrt will continue to rely on Vogel & Noot quality in the future! Jožef Magyar KG Lendava d.d., Slovenia Farm size: approx. 2,400 ha Mr Jožef Magyar owns KG Lendava d.d. and cultivates a total of 2,400 ha of arable farmland. Maize and barley are the main crops at the Slovenian farm. The farm workers have been working with three Vogel & Noot plus Hektor 1000 Vario ploughs for a while now and are very satisfied with them. Jožef Magyar only buys soil cultivation equipment with the best ecological and economic properties. "40 years of soil cultivation experience and the most precise furrows across all our fields have convinced me Vogel & Noot ploughs fulfil the requirements for my farm" says the owner. That's also what made him decide to invest in his 4. plus Hektor 1000 Vario plough for soil cultivation. Jérôme Guerber Ferme du Saule Vert Mulcey, France Farm size: approx. 145 ha Mr Jérôme Guerber cultivates an arable farmland area of approx. 145 ha in the north east of France. He mainly grows wheat, barley and maize. In 2010, Jérôme Guerber chose the 8-furrow semi-mounted plough plus Hektor 1000 STHD Vario from Vogel & Noot. "I've been using the plus Hektor 1000 Vario for two years. The robustness of the plough is particularly crucial for me as we mainly work with heavy soils. I'm impressed by the high quality of work and excellent price/ performance ratio" says Mr Guerber enthusiastically. 5

6 plus Hektor plus Hektor 1000, 6-furrow Manoeuvrable and flexible The features: Compact and manoeuvrable Easy to adjust Accurate tracking combined with optimum power transmission Precise depth control at low soil pressure, thanks to the large wheel Good edge ploughing, thanks to optimum wheel position within the plough frame VN stump-jump systems - reliable and comfortable Simple plough settings, flexible use and high area coverage are just a few of the advantages of the plus Hektor. The robust frame, measuring 150x150x12/(16) mm, ensures a high level of stability and long service life. The plus Hektor is also characterised by its accurate tracking combined with optimum power transmission. The position of the large wheel allows optimum edge ploughing. And of course safety on the road and in the fields is guaranteed thanks to the hydro-pneumatic transport suspension and optional stump-jump systems. Stump-jump systems You can choose either traditional shearbolt protection or the fully automatic hydraulic non-stop system. The special feature of the hydraulic solution is that it swings out at a considerable height as well as to the side. The body of the plough swings back in without interrupting the work. An important advantage of the non-stop system is that the initiating torque for different soil hardness is comfortable and continuous - all from the tractor. Additional shearbolt protection protects the stump-jump system from overload. Width-of-cut adjustment: With the plus Vario implements, the width of cut can be adjusted continuously from the tractor via the hydraulic system. It goes without saying that all tools and the leading furrow width are adjusted at the same time. The mechanical version, too, has a wide adjustment range to give the plus Hektor great versatility. 6

7 Quality in every detail Wheel position: Optimum edge ploughing by positioning the wheel either in front of the penultimate plough body or close to the last one Semi-mounted wheel: Precise depth control with low soil pressure, thanks to large wheel (Ø 980 mm, width 500 mm) Mud guard and scraper prevent contamination Swing-arm system (Vario): Continuous adjustment of width of cut and hydraulic track width adjustment using a stable swing-arm structure with large bearing pins (Ø 65 mm) and bushings Turning cylinders damped in the final positions Optimum stabilisation between turning body and frame tube Smooth-running slide bearings relieve pressure on turning body Headstock (Vario): Minimal lateral pull and maximum tracking accuracy, thanks to continuous, non-rotating cross-shaft Optimum power transmission, thanks to the particularly low draft point 7

8 plus Herkules plus Herkules 1000, 9-furrow (6+3) The all-rounder The features: High area coverage with up to 9 furrows Optimum soil adaptation, thanks to auto-float control fitted as standard Highly stable during transport Short turning times, thanks to great manoeuvrability on headland Flexible, simple switching between on-land function and working in the furrow The plus Herkules with 7 to 9 furrows adapts superbly to different soil conditions, thanks to its semi-mounted shaft and hydraulically-controlled frame joint. Auto-float control ensures that the frame end piece can move freely, providing maximum operator comfort and outstanding adaptation to hilly terrain. Difficult usage conditions and safe road transportation are no problem for this semi-mounted reversible plough, with its robust frame (measuring 250x150x8.8 mm) and hydro-pneumatic sprung chassis. Furrow-width adjustment The furrow width can be adjusted to 4 levels as standard by manually setting the plough beam elements and frame. In this way, the implement can easily be adapted to different conditions (soil conditions, tractor etc.). The tools and depth wheels are adapted automatically. Stump-jump systems Depending on your individual requirements, you can choose either the mechanical shearbolt protection system or a hydraulic non-stop stump-jump system. plus Herkules OnLand Ploughs with the OnLand design offer significant advantages with regard to avoiding soil compaction and permit the use of crawler tractors and oversize tyres or even twin tyres. Trouble-free ploughing is possible with a tractor width of up to 4.20 m. The plus Herkules can be converted simply and quickly for use either as an on-land version or for working in furrows. 8

9 Quality in every detail Swing support wheel: Optimum soil adaptation for the rear of the plough, thanks to a stable, wide swing support wheel (Ø 600 mm, pneumatic) Hydraulic damping as standard with adjustable synchronisation cylinder Continuous depth adjustment without tools using latch system on wheel carrier Chassis/wheel position: Chassis as standard with hydro-pneumatic suspension system Ensures safety and high quality of work on the steepest of slopes Simple, continuous depth adjustment without tools using easily accessible threaded spindle Turning gear/cylinder: The large turning cylinder, damped in the final position, allows gentle rotation and clean turning in all positions Extensive ground clearance under the drawbar, thanks to the central position of the turning equipment Hydraulic adjustment of tractor track Support wheel system: Stable double support wheel (Ø 600 mm, pneumatic) Working depth can be adjusted simply and quickly without tools using hole arrangement Precise depth control in furrows Wheel tracking can swing freely Headstock: Continuous, non-rotating cross-shaft in all categories Extremely manoeuvrable on headland with steering angles of over 90 degrees Optimum weight transfer, thanks to the particularly low draft point 9

10 plus Heros plus Heros 1000, 12-furrow Flexible in all directions 10 The features: Maximum area coverage with up to 13 furrows Optimum soil adaptation, thanks to auto-float control fitted as standard Maximum flexibility with frame extension at front and rear Excellent edge ploughing characteristics Outstanding headland manoeuvrability As the strongest in the plus range with 9 to 13 furrows, it offers the simplest way to reduce the number of furrows with frame extensions at the front and rear, in order to protect the tractor in the most difficult soil conditions. The mounting shaft and hydraulicallycontrolled frame joint ensure that even this size of plough has optimum soil adaptation and maximum safety when being transported along roads. Measuring 200x200x16 mm, the plough frame and carefully thought-out chassis give very good edge ploughing characteristics for a plough of this size. Furrow-width adjustment Standard furrow-width adjustment is carried out over 4 levels by manually pivoting the plough beam elements and frame. The tools and support wheels are automatically adjusted at the same time. Stump-jump systems With the plus Heros, you can once again choose between a mechanical shearbolt protection system or a hydraulic stump-jump system. The hydraulic solution impresses everyone with its high release forces (simply adjusted via the hydraulic system) and unsurpassed lifting height. They enable the body of the plough to avoid even large obstacles reliably. plus Heros OnLand An on-land version of the Heros is also available. This construction allows you to make use of the concentrated force of caterpillar vehicles or tractors with twin tyres. The maximum possible vehicle width is up to 5 m. When combined with the VN linkage chassis, the plus Heros can also be towed by tractors without a lifting hydraulic system by using the adjustable drawbar.

11 Quality in every detail Swing support wheel: Optimum soil adaptation for the rear of the plough, thanks to a stable, wide swing support wheel (Ø 680 mm, pneumatic) Hydraulic damping as standard with adjustable synchronisation cylinder Continuous depth adjustment without tools using latch system on wheel carrier Chassis/wheel position: Chassis as standard with hydro-pneumatic suspension system Optimum edge ploughing with wheel position within the plough frame Simple, continuous depth adjustment without tools using spindle stop Support wheel system (OnLand): Precise depth control and simple, continuous adjustment of working depth Optimum working quality and area coverage, particularly on slopes Frame extension at the front: The tractor is protected by simply reducing the number of furrows when soil conditions are difficult (also comes as standard with frame extension at the rear) Turning gear/cylinder: The large turning cylinder, damped in the final position, and additional support cylinder allow gentle rotation and clean turning in all positions Extensive ground clearance under the drawbar, thanks to the central position of the turning equipment Hydraulic adjustment of tractor track Headstock: Continuous, non-rotating cross-shaft in all categories Extremely manoeuvrable on headland with steering angles of over 110 degrees Optimum weight transfer, thanks to the particularly low draft point 11

12 Excellent soil adaptation Despite its size, the plus Herkules and plus Heros adapt superbly to the soil conditions they face. This is down to the semi-mounted shaft and hydraulically-controlled frame joint, as well as the support wheel system (for OnLand versions) and the swing support wheel. Excellent soil adaptation Auto-float control, fitted as standard, means that the frame end piece can move freely during ploughing. A valve coupled to the chassis switches the hydraulic frame joint to the float position automatically once the plough is set down. This provides you with the ultimate driving comfort and outstanding adaptation to hilly terrain. You can also opt to control the frame joint manually (raise or lower the frame end piece with a delay) in order to keep the headland as tight as possible. 12

13 Furrow width adjustment All plus ploughs feature mechanical furrow width adjustment as standard. In plus Vario implements, this can be smoothly adjusted hydraulically from inside the tractor. Mechanical precision The standard furrow width adjustment is done over 4 levels by manually pivoting the leg elements. In this way, the implement can easily be adapted to different conditions (soil conditions, tractor, etc.). When the furrow width is adjusted, all tools and depth wheels are also automatically adjusted. No additional correction is necessary. Hydraulic convenience The furrow width can be smoothly adjusted from the inside the tractor via the hydraulic system. The furrow width adjustment can be monitored at a glance via a large indicator. Of course, our Vario system is skilfully designed so that the draft point and the furrow width of the first body are automatically corrected at the same time. All the tools and the depth wheel are also automatically adjusted. The mounts for the plough body and accessories are positioned on the side, beyond the frame tube, so as not to weaken the frame with large holes. This lateral displacement also enlarges the pass above the plough body. CONNEX bushings The advantages of the plus Vario: Available for all overload systems Suitable VARIO ploughs for all soil conditions and tractor sizes Easy adjustment, essentially the same as a standard plough, perfect adjustment of draft point and leading furrow when adjusting the furrow width No need to readjust leading furrow or accessories, low wear and traction requirement Pivot points are minimised Minimal wear and maintenance Each pivot point has CONNEX bushings. When worn, simply replace bushings Longer service life, low replacement costs Leg bracket has pivot points beyond the frame tube No weakening of frame tube with additional holes Optimal arrangement of levers on the system landside/pivot point/connecting rod - low adjusting force/strain on bearings Low wear, long service life for pivot points Bearing pins lubricated from the inside out no contamination in the bearings Minimal wear and maintenance Main bearing pins adjusted using a castle nut and with stable torsion lock Long service life for bearings 13

14 Tools plough body The choice of a suitable plough body determines the quality of the ploughing to a large extent. The plus shares All plus bodies are fitted with specially designed shares. The special shape gives less resistance and smoother draft. The self-sharpening area has been made much thicker, thus considerably increasing the life of the ploughshare. System with four times the use All plus ploughs have a system from which you get four times the use. The long length ensures optimal cornering stability, which reduces fuel consumption and ensures perfect ploughing Points with special shape The points in plus shares protect the share blade and thus lower wear costs. Its flat shape, the self-sharpening pull-in area which saves on traction and the 15- mm thick lateral reinforcements make the points extremely resilient in the wear zones through specially chosen materials and result in exceptionally long service lives. Only available from Vogel & Noot - the optional cutting share: A knife which is fitted splits the clods to facilitate finer crumbling and easier reworking. You save time and money with the VN cutting share. The advantages of plus bodies Complete and consistent incorporation of crop remains promotes fast and effective decomposition, encourages soil life and therefore also helps guarantee greater yields An even surface with the finest possible crumbling makes subsequent work easier and saves seedbed preparation costs Broad furrow clearance enables the use of wide tyres which has the extremely positive effect of less soil compaction. The incorporation of large amounts of crop remains is also promoted A low traction requirement saves directly on fuel costs and therefore makes a considerable contribution to cost-effective use of the plough 14

15 Overview of plus plough bodies The Vogel & Noot plough range contains a wide selection of plus plough bodies and therefore guarantees perfect work in your soil conditions. WY400 Wound design, can be used anywhere in light to heavy soils, newlybroken soil in meadows and on sloping ground. It is particularly easy to pull and clears the furrow well. Working depth up to 30 cm WL430 Strongly wound and very drawn-out, outstanding furrow clearance for wide tyres up to 710 mm, optimum turning in of crop remains. Excellent slope-working capability. Working depth up to 33 cm WX400 Very flatly wound plough body for very heavy soils, very easily drawn for particularly heavy conditions, very good cleaning properties. Working depth up to 25 cm WXL430 Also for heavy soil conditions, very easy to pull due to its pointed shape. Good furrow clearance and incorporation of crop remains. Working depth up to 28 cm WXH400 Specially wound body which is particularly easy to pull with very good furrow clearance. Working depth up to 30 cm WST430 slatted body Particularly good for sticky soils, good clod-breaking and furrow clearing properties slats can be replaced individually. Very good turning in of crop remains, can be used anywhere. Working depth up to 33 cm UN400 / UN430 UST400 slatted body Steep universal design in two different sizes for light to medium soils. Working depth up to 35 cm with UN400, up to 40 cm with UN430 Steep universal design for light to medium soils, slats can be replaced individually; particularly suitable for sticky soils. Working depth up to 30 cm In addition to the models shown, there are a range of other body designs to meet the needs of special applications or areas. 15

16 Stump-jump systems the strength of steel versus the strength of stone The plus always wins this battle. Due to the ingenious idea of mounting all components outside on the plough frame, you can choose between several different stump-jump systems for your plus. Mechanical system Shearbolts are the tried and tested standard solution for this system. When stressed, the shearbolts fracture at the break points and the plough body swings up and out of the way of the obstacle. The plough is then simply lifted, new shearbolts are inserted and ploughing can be continued. Advantages: Double shearing, hardened flange plates High-quality shearbolts in 10.9 quality and with a special design The pivot point of the leg is very high and located towards the front - the plough does not lift when it is triggered Fully-automatic hydraulic system with compact accumulator The hydraulic solution uses a hydraulic cylinder which is connected to a nitrogen-filled piston accumulator. The hydraulic pressure can be smoothly adjusted which consistently guarantees optimum ploughing with the greatest possible ease. Advantages: Smooth action which protects the materials through gentle lifting and pull-in Simple adaptation of the trigger force for different soil conditions Increased lifting height for even better safety with large obstacles Compact accumulator with tubes: By connecting the individual elements and one stop valve for each, all of the advantages of the compact accumulator can optionally be utilised. By opening the valve, the following further advantages can also be used: Additional advantages: Adjustment of the trigger force for all elements in one single movement (even whilst driving) Similar pipe cross sections mean that the elements have only a slight influence on one another The elements function completely independently of one another (no influence on trigger force) Elements can be precompressed independantly (e.g. first body) No hydraulic hoses or pipes on the plough frame Trigger characteristics of a fully-automatic hydraulic stump-jump system Horizontal trigger force (kp) Vogel & Noot Competitor 1 Competitor 2 The specially designed trigger geometry ensures that the system triggers gently and safely when an obstruction is met. The plough and tractor are protected. Trigger pressure of between 90 and 140 bar can be set conveniently from the tractor. This ensures optimum adaptation to different soil conditions. While you can use a lower trigger force for light soils, high trigger forces for heavy soils ensure that the plough body remains firmly in place in the soil. Furthermore, all plus ploughs are equipped with shearbolts, which ensure absolute safety if you drive over obstructions Lifting height (cm) 16

17 Working tools Manure skimmer For universal use, from newlybroken soil in meadows to maize straw. Skim coulter Especially for flat work when breaking soil. Special skimmer For optimum work with extensive crop remains. All around adjustable Beside the standard version with step less height adjustment the 3 above offered skimmers are optional also available with step less land grip- as well as three-step working angle adjustment. These constructions are furthermore equipped with a comfortable height adjustment, an additional wearing part increase the product life of the skimmer board and reduces the wearing costs. Trashboards A good alternative for mixing crop remains. With additional support for leg as standard. Deflector boards When used with the manure skimmers, the deflector boards prevent straw (especially maize straw) from wrapping around the leg. Knife coulter More cost effective alternative to disc coulter, reduces wear on the plough body and also reduces lifting force requirement. Disc coulters The disc coulter also makes a considerable contribution to efficient ploughing. The disc coulter's precise cutting action helps achieve full turning and complete incorporation of crop remains as well as effective furrow clearance. For plus ploughs, notched disc coulters with a diameter of 500 or 600 mm are available. The depth of the coulters can be adjusted very finely using toothed discs, the robust tapered roller bearings are well-protected in their external position and are maintenancefree. All plough models can also optionally be fitted with disc coulters in front of each plough body. Disc coulter on standard ploughs with shearbolt protection system Vogel & Noot has developed a practical togglelever clamp for this version. This allows both sides to be adjusted at the same time. The system can also be adjusted in the direction of travel, which creates a unique free space between body and coulter (prevents blockages). Disc coulter on ploughs with stumpjump systems (standard and Vario) With these plough models, the disc coulter is mounted on the pivoting leg of the stump-jump system. When the stump-jump system is triggered, the coulter is also released and protected from damage. Landhold adjustment for both sides is also performed simultaneously with the wellknown clamp. Disc coulter on Vario ploughs with shearbolt protection system In Vario ploughs, the disc coulter is also longitudinally displaceable in the same unique way. This enables the major advantage of plus ploughs with large amounts of crop remains. Of course, if the furrow width is adjusted, the disc coulter is also precisely adjusted at the same time. 17

18 Accessories Packer arms Subsoiling spikes Lighting For combined use with plough turning packers, all plus ploughs can be fitted with a hydraulically unlockable packer arm. All packer arms are equipped with a springloaded safety gear, which attenuates the load peaks that occur when the packer is being attached and thus protects the implement and tractor. In line with the motto "Shallow ploughing and deep loosening", the subsoiling spike loosens the soil layers below the working depth of the plough. The height of the loosening spikes can be adjusted. The spikes are designed to be easily exchangeable so as to ensure low wear costs. All plus ploughs can be equipped with a lighting system for road transportation, ensuring that they are safe in traffic. Linkage chassis This new linkage chassis with 3-point linkage (lifting force approx. 7,000 kg) makes it possible for plus ploughs to be used by tractors without lifting hydraulic systems. The robust frame with long drawbar can be used for external tractor widths of up to 5.00 m. It is attached to the tractor via towing eyes for the drawbar. Equipped with adjustable track width (for high stability when turning and during transportation) and mechanical depth adjustment to regulate working depth, this adapter function can also be used for other VN soil cultivation equipment (e.g. subsoilers). The VN plough range contains much more than just the semi-mounted reversible ploughs described here. In addition to a large selection of nonreversible ploughs, it also includes mounted reversible ploughs, 11 series of 2- to 6-furrow ploughs for your individual requirements and much more. 18

19 Semi-mounted reversible plough Technical Specifications Model Interbody clearance (cm) Furrow width (cm) Underbeam clearance (cm) Clearance between tyres (mm) Max. kw (hp) range Weight (kg) Hektor /40/44/48 76/82/ (257) Hektor 1000 ST (hydr.) /40/44/48 78/ (257) Hektor 1000 Vario /82/ (257) Hektor 1000 ST Vario (hydr.) / (257) Herkules /40/44/48 76/82/ (205) Herkules 1000 ST (hydr.) /40/44/48 78/ (205) Herkules 1000 Onland /40/44/48 76/82/90 bis (205) Herkules 1000 ST Onland (hydr.) /40/44/48 78/82 bis (205) Heros /40/44/48 76/82/ (330) Heros 1000 ST (hydr.) /40/44/48 78/ (330) Heros 1000 OnLand /40/44/48 76/82/90 bis (330) Heros 1000 ST OnLand (hydr.) /40/44/48 78/82 bis (330)

20 Strong partners value intelligence - leading the world in expertise, consultation and service. The full range of agricultural machinery in forward-thinking quality Ploughs Cultivators Compact disc harrows Subsoilers Rotary harrows Seed drills Shredders Field sprayers Seedbed combinations Your Vogel&Noot partner Vogel & Noot Landmaschinen GmbH & Co KG A 8661 Wartberg/Mürztal T +43 (0) 3858/605-0 F +43 (0) 3858/ info@vogel-noot.net The illustrations and data given here are not binding. Subject to change without prior notice. 10/2013