Contents. Product Portfolio 04 Product 06 Global Awards 23 Product Selection Guide 24 Our Solutions 26 At a Glance 27 Global Network 28 FUTURE

Size: px

Start display at page:

Download "Contents. Product Portfolio 04 Product 06 Global Awards 23 Product Selection Guide 24 Our Solutions 26 At a Glance 27 Global Network 28 FUTURE"

Alexis Bell
6 years ago
Views:

1 The Future of Automotive Automotive Material Solutions

creating value beyond customer s expectation, at the center of future of automotive based on

2 Contents Product Portfolio 04 Product 06 Global Awards 23 Product Selection Guide 24 Our Solutions 26 At a Glance 27 Global Network 28 LOTTE Advanced Materials is committed to creating value beyond customer s expectation, at the center of future of automotive based on competitive products, innovative solution, and in close partnership with you. FUTURE COMPETITIVE INNOVATIVE 03

Product Portfolio INTERIOR EXTERIOR LIGHTING STRUCTURE Fresh Interior Upscale Design Weatherability Safety Functionality & Productivity Optical Solution Light-weight & Metal

ASA High Gloss/Low Gas PBT Dimensional Stability PBT/ASA/GF Low Gloss, Emotional Feeling Material PC/ASA High Weatherable/Impact PC/ASA High Gloss/Low Gas PC/ABS High

3 Product Portfolio INTERIOR EXTERIOR LIGHTING STRUCTURE Fresh Interior Upscale Design Weatherability Safety Functionality & Productivity Optical Solution Light-weight & Metal Replacement Part-integrated Design Low TVOC ABS Metal Plating ABS & PC/ABS High Weatherable/Impact PC Conductive/High Heat PA/PPE/CNT Low Gloss ABS, PC/ABS High Weatherable ASA High Gloss/Low Gas PBT Dimensional Stability PBT/ASA/GF Low Gloss, Emotional Feeling Material PC/ASA High Weatherable/Impact PC/ASA High Gloss/Low Gas PC/ABS High Flow/Surface Quality PBT/PET/GF Light Diffusion PC High Modulus PC/PET High Heat PPA Light Blocking ABS, PC/ABS High Flow/Impact PC/PBT High Flow PC/ABS Chemical Resistant PC/ABS 04 05

4 INTERIOR Low TVOC ABS SR-0320LT Fresh Interior Upscale Design SR-0325LT Low TVOC: VDA277 (<50μgC/g) Low TVOC Less odor: VDA270 Ref. A 60 PC/ABS Heat Resistant General HP-1000XA Center console HP-1000X Window switch panel SR-0300 SR-0310FM High Flow SR-0320 K WP-1069 SR-0325LT WP-1089 SR-0330M Low Gloss SR-0340M SR-0320LT SR-0325LT Chemical Resistant SL-0100 Heat Resistant WP-1059 HP-1000XC Light Blocking WP-1069 SL-0100 (ABS, Extrusion) SR-0320 K WP-1098 (PC/ABS) SR-0325LT LX-1098F (PC/ABS, Luminous) High weatherability WR-7250HS (PC/ASA) PC/ASA PC Light Diffusion General TP-1020 Light Resistance TP-1020U TP-1025U 94 C 92 C Heat Sagging (90 C) 4mm 5mm Heat Sagging (95 C) 9mm 10mm Low gloss High impact strength Gloss Change by Mold Temp. Mold Temp 30 C 60 C 90 C WP IF-7900 (EF PC/ASA) Low Gloss WR-7250HS Emotional Feeling Material 06 LH-0300 (ABS, Injection) WP-1200 HDT Low Gloss ABS, PC/ABS, PC/ASA Light Blocking WP-1100 LX-1098F LH-0300 PC/ABS/GF SR-0320LT Door upper trim Paint-free Super Low Gloss Heat Resistance WP-1098 Low Gloss Ref. B General Low TVOC 10 PPM SR-0320LT IF-7900 Mold Temp. ABS Sheet Gloss modifier WP-1098 Door panel Product Line-up Air vent bezel ABS Over head console Ref. PC Alloys SL-0100 WP-1098 Low Gloss ABS (Gloss 10 ) Extrusion PC/ABS (Gloss 30 ) High impact, Injection LH-0300 WR-7250HS Heat Resistant ABS (Gloss 30 ) Injection PC/ASA (Gloss 30 ) Injection 07

Light Diffusion PC Light Blocking ABS, PC/ABS TP-1020 TP-1020U (Light Resistance) TP-1025U (High

luminance, uniformity Center fascia: Overlay housing Button (LED lighting) Window shield lens 2-shot

Instrument cluster Excellent Quality of Appearance: Puddle issue addressed Improved yield ratio of

Light reflection Y Light transmission Y Transmission Max. Required level 94 ± 2 % < 0.5% < 2.

86 Comparison of LED light penetration LOTTE ABS Conventional Excellent Quality of Appearance:

Property Balance Impact strength comparison Flexural strength comparison HCO-product surface

12.0 9.0 Ref. A Ref. B Ref. B LOTTE 90 80 Ref. A Ref. B LOTTE Ref.

0 70 Result High-quality appearance and a reduction in internal stress during injection molding

5 Light Diffusion PC Light Blocking ABS, PC/ABS TP-1020 TP-1020U (Light Resistance) TP-1025U (High Light Resistance) High flowability High impact strength Painting stability Diffusion properties: High luminance, uniformity Center fascia: Overlay housing Button (LED lighting) Window shield lens 2-shot molding ABS SR-0320 K SR-0325LT PC/ABS WP-1069 Light blocking characteristic Balanced properties Instrument cluster Excellent Quality of Appearance: Puddle issue addressed Improved yield ratio of injection molding and painting, based on high flowability and thermal stability Optical Property Light reflection Y Light transmission Y Transmission Max. Required level 94 ± 2 % < 0.5% < 2.5 ABS TiO2 10% TP-1020 ABS TiO2 15% Comparison of LED light penetration LOTTE ABS Conventional Excellent Quality of Appearance: Painting quality improved TP-1020 LED light blocked LED light penetrated After injection molding Property Balance Impact strength comparison Flexural strength comparison HCO-product surface comparison LOTTE After painting Fewer holes on the painted surface Many holes on the painted surface Ref. A Ref. B Ref. B LOTTE Ref. A Ref. B LOTTE Ref. B LOTTE High flowability and thermal stability Result High-quality appearance and a reduction in internal stress during injection molding process Improved painting quality as a result of excellent appearance Uniform surface for painting TiO2 10 TiO TiO2 10 TiO Optical property (Texted LED lighting) becomes available through laser cutting (Luminance, uniformity of luminance) * HCO: Heat Control Overlay 08 09

EXTERIOR High Flow PC/ABS WP-1069 WP-1089 Weatherability Property Balance High flowability Heat stability Safety Izod Impact, notched, 23 C (kgf cm/cm) WP-1089 WP-1069 65 (PC 65%) 60 55 Spiral flow,

6 EXTERIOR High Flow PC/ABS WP-1069 WP-1089 Weatherability Property Balance High flowability Heat stability Safety Izod Impact, notched, 23 C (kgf cm/cm) WP-1089 WP (PC 65%) Spiral flow, 250 C, 2mm (cm) Center fascia 95 C Izod Impact, notched, -30 C (kgf cm/cm) Very bad 100 C bad 105 C Air vent normal 110 C ABS good Very good 115 C PC/ABS Heat stability (270 C) HDT Metal Plating Heat Stability (Gloss Change, 270 C * 10min.) WP-1069 After Before After Gas silver Flow mark and discoloration Gloss (60 ) After Before Gloss = 3.2 After Gloss = 4.2 WP-1059 The Combination of Functional Additives: Enhanced chemical resistance Painting stability Air freshener chemical resistance test (¼ Ellipse Jig method) Chemical resistance: Freshener No crack was found on the surface after 72 hours passed since the application of air fresheners. WP-1069 Painting PT-0180H Air Freshener A WP-1089 Metal Plating PT-0180J WP-1041(G) Heat Resistant WP-1051 SR-0320 K WP-1061 AE-2030 Application of air freshener A and B Center fascia: Overlay panel WP-1059 BM-0325 General Impact strength ¼ Ellipse Jig HP-1000X High Flow BM-0320 J PC/PET Blow Molding SR-0325, 0325LT High Heat/Chemical Resistant PC/ABS HP-1000XC HP-1000XA MP-0670 Before Before High Impact MP-0160 R Reinforced AE-2130 ASA High Impact/Flow WR-9120J WR-9300HF WR-9300I AE-2150 High Weatherability AE-2230 WX-9300UV WX-9310UV Specimen WX-9330UV Air Freshener B Cover console upper frame Air vent housing & deco (painting) PC/ASA Satisfactory results of air freshener test on part s chemical resistance Freshener A Arm rest upper/lower cover Freshener B Sample 1 Satisfactory Satisfactory Satisfactory Satisfactory WR-7000 WX-7010 WX-7030 PC/PBT High Impact/Flow AE-3060 Impact at Low Temp./ Chemical Resistant AE-3063I Sample

Metal Plating Materials with High Adhesion Strength High Weatherable ASA ABS MP-0160 R MP-0670 Excellent quality of appearance Metal adhesion Radiator grille Rear garnish WX Series (High

Garnish WP-1051 WP-1061 Metal Plating ABS (MP-0160 R, MP-0670) Excellent Weatherability Good surface quality without pitting Well dispersed rubber and quality consistency Weatherability (3000h)

7 Metal Plating Materials with High Adhesion Strength High Weatherable ASA ABS MP-0160 R MP-0670 Excellent quality of appearance Metal adhesion Radiator grille Rear garnish WX Series (High weatherability) WR Series High weatherability High impact strength Outside mirror Radiator grille PC/ABS Quality stability Emblem Outside mirror Heat resistance Pillar Spoiler WP-1041G Door handle Garnish WP-1051 WP-1061 Metal Plating ABS (MP-0160 R, MP-0670) Excellent Weatherability Good surface quality without pitting Well dispersed rubber and quality consistency Weatherability (3000h) Impact Properties Grade Delta E Gloss Retention IZOD FDI General ASA 5~10 < 5% < 15 25~27 starex R WX Series 3 25~40% 19~21 28~29 Conventional Improved ABS Performance Improvement + 40 % % + 25 % + 15 % Metal Plating PC/ABS (WP-1041G) WP-1041G A B Grade Selection Heat Resistance Heat Resistance Mid Heat Resistance High Heat Resistance WX-9300UV WX-9310UV WX-9330UV Schematic Diagram Properties Regularly etched Matrix SAN composition optimize. g-abs dispersion and content control Pit 1.7 Adhesion 415 Incompletely etched Rubber dispersion is not regular in SAN phase Pit 6.2 Adhesion 387 Under etched Matrix SAN composition is not optimized Pit 4.5 Adhesion 250 Properties Impact Resistance Weatherability (3000h) Grade WX-9300UV WX-9310UV WX-9330UV FDI (N/J) 3,430 / 28 3,400 / 28 3,590 / 29 Dupont Drop (Destruction Rate) 12% 10% 10% de Gloss Retention 44% 40% 31% Metal Plating PC/ABS Comparison of PC Content PC/ABS with Low PC Content Reduction of etching time Low metal adhesion Low heat stability * Adhesion (N/cm) 8 MI VST PC/ABS with High PC Content 6 Increase of etching time High metal adhesion High heat stability High mechanical properties 4 WP-1041G WP-1051 WP-1061 Low PC Content (%) High 12 13

8 High Weatherable/Impact PC/ASA High Modulus PC/PET WR-7000 WX-7010 WX-7030 High weatherability High impact strength Heat stability High flowability Property Balance Radiator grille Outside mirror Roof rack Rear spoiler AE-2030 AE-2130 AE-2230 AE-2150 High impact strength Low CLTE Dimensional stability PC/PET: AE-2030 Dimension Stability (Low CLTE & Low Warpage) CLTE AE-2030 Test Method Unit Condition ASTM E831 1/ 7.7E E E E ~50 (Flow, xflow) PC/PET/MF: AE-2130, AE-2230, AE-2150 Surface Quality Gloss (60 o ) AE-2030 AE-2030 has better gloss and shows good paintability WR-7000 Property Schematic Diagram Injection Molding Specimen LOTTE PC/PET/MF Conventional LOTTE PC/PET/MF Conventional WR-7000 Flowability Change of Delta E (SAE J 2527) de Radiator grille Door handle Improved Surface Quality Gate Gate Gate Gate Color performance Weatherability 6 4 Rear spoiler Garnish MF dispersion optimize MF aggregation Good surface finish Flash, Flow mark AE-2130: MF 5%, AE-2230: MF 20% 2 Thermal stability Impact resistance 0 0KJ 1000KJ 2000KJ 2500KJ High Impact/Flow PC/PBT WR-7010 Property WX-7010 Color performance Flowability Weatherability Change of Delta E (ISO 4892) df 3 2 AE-3060 AE-3063I Dimensional stability (CLTE) High impact strength High flowability (kgf cm/cm) High Impact/Flow 60 AE-3060 Ref. B 1 Chemical resistance 40 Thermal stability Impact resistance KJ 1500KJ High stiffness 20 Ref. A AE-3060 Ref. A Ref. B WX-7030 Property WX-7030 Phase stability Flowability UV stability Change of Delta E df 3 Door handle Roof rack Pillar Notched IZOD (@ 23 ) Impact at Low Temp./Chemical Resistance AE-3063I Notched IZOD (@ -30 ) 2 Bumper beam Test Condition Color performance Impact resistance 1 Energy absorber Crack Thinner 2min. Drying at 70 C 30min. Aging at RT 3hr. Dupont drop (1m, 4kg) Thermal stability 0 500KJ 1000KJ 1500KJ KJ 14 15

LIGHTING High Weatherable/Impact PC LT Series Functionality & Productivity ABS Optical Solution PC Heat Resistant LT-1100 LT-1220 (High Flow) High weatherability Head/Fog lamp lens High impact

SR-0330M Phenol DMC DPC PC/ABS EG HP-1000XG High Impact (Low Temp.

9 LIGHTING High Weatherable/Impact PC LT Series Functionality & Productivity ABS Optical Solution PC Heat Resistant LT-1100 LT-1220 (High Flow) High weatherability Head/Fog lamp lens High impact strength Head/Fog lamp bezel Low gas Rear lamp reflector General (Light Diffusion) SR-0300 LT-1100 SR-0320 K LT-1220 SR-0325LT Eco-friendly Process LOTTE EO SR-0325 (High Flow) CO Methanol EC Co2 Cl2 SR-0330M Phenol DMC DPC PC/ABS EG HP-1000XG High Impact (Low Temp.) HP-1000XA High Flow BPA PC Powder BPA ASA COCl2 CH2Cl2 Waste Water/NaCl Drying/Extrusion Polycarbonate Polycarbonate High Gloss/Low Gas NaOH General WR-9330I Non-Phosgene Process (Melt Process) Phosgene Process (Interfacial Process) WR-9370 High Weatherability WP-1069 Hard Coating PC Covering PMMA Clear Covering PMMA Red Covering WP-1089 Combination PBT ΔE (SAE J 1960, 2500KJ) General ASF-9810FL High Flow AMECA Listing ASF-9810FM Super High Flow ASF

High Gloss/Low Gas PBT High Gloss/Low Gas PC/ABS ASF Series ASF-9810FL ASF-9810FM (High Flow) ASF-9860 (Super High Flow) Low gas Heat stability High gloss surface (Direct metallization) Head lamp

10 High Gloss/Low Gas PBT High Gloss/Low Gas PC/ABS ASF Series ASF-9810FL ASF-9810FM (High Flow) ASF-9860 (Super High Flow) Low gas Heat stability High gloss surface (Direct metallization) Head lamp bezel Fog lamp bezel Rear lamp reflector HP-1000XG High gloss Low gas High flowability High heat resistance Rear lamp housing Center high mounted stop lamp (CHMSL) Rear lamp reflector Low Gas Heat Resistance (270 /10 min.) Surface after Metallization Heat Resistance Test (280 /10min.) Fogging Test (270, 3hr) ASF-9810FM Pin-point Test ASF-9810FM HP-1000XG HP-1000XG White Mark Gas & Flow Mark 80ppm 180ppm Test condition: Cylinder temperature 280, 10min-residence shot Improved Pin Hole Issue High Flowability HP Series Spiral Test Melt Flow (250 C, 2.16kgf) 37g/10min 34g/10min Before After Low Out Gassing Carbon Black Dispersibility Fogging Test (250 C, 1Hr) HP Series Optical Microscope ( 50) Conventional LOTTE HP Series Ref. HP Series Ref. Gas Mark 25 Shading Convert ppm Haze Count Pinhole Total Area 1, Size (Diameter)

STRUCTURE PA/PPE/CNT CA-7000C Light-weight & Metal Replacement Part-integrated Design CA-7009 High heat resistance Fender Light-weight Fuel filler door Design freedom Body panel Conductivity

11 STRUCTURE PA/PPE/CNT CA-7000C Light-weight & Metal Replacement Part-integrated Design CA-7009 High heat resistance Fender Light-weight Fuel filler door Design freedom Body panel Conductivity Dimensional stability Low hygroscopicity Thermal Stability DMTA Storage Modulus Elastic Modulus CA-7000C PA/PPE/CNT CA-7009 Storage Modulus 10,000 Material CA-7000C 1, CA , , , PBT/ASA/GF 10 Conductive/ High Heat Resistant Dimensional Stability AR-5300H (GF 30%) 1 0 CA-7000C CA Temperature ( C) DMTA measurement condition Tem. Range: 0 C ~ 275 C Scanning Rate: 5 C/min Frequency: 1Hz Better Surface Quality PBT/PET/GF Lower Moisture Absorption Filler Loading (%) AR-6200 CNT (Carbon Nano Tube) CF (Carbon Fiber) CB (Carbon Black) <1% >10% >15% 45 C, 95%RH Water Absorption High Flow/Surface Quality CA-7000C CF CB Time (days) Water Absorption 1E-2 Water Absorption Comductivity (ohm-1 cm-1) CNT 1E-4 Increase aspect ratio E-6 2 1E Vol % of conductor Time (days) 21

Global Awards PBT/ASA/GF 30% AR-5300H Dimensional stability Shrinkage Comparison Weight reduction Part integration AR-5300H 0.8 Ref.

(GF) [2017] MD Shrinkage [2015] CLTE Comparison Korea NET Certification μ/m C Panorama sunroof frame MFD Cover SPE Automotive Innovation Awards Winner TD

(GF) 30 120 Passenger Deco Bezel Excellent pattern design with 3D 2-shot layers - Layer 1: Transparent PC - Layer 2: Non-painting Luminous ABS Cost

Direction Premium non-painting material solution PBT/PET/GF 20% AR-6200 ➊ [2014] SPE Automotive Innovation Awards Winner High flowability World s first

5 Low gravity Paintability Thermal stability INFINO Luminous PC/ABS LX-1098F Flowability (AR-6200) AR-6200 Designed to fit interior parts of the 2015 MY

Scratch Resistance ➋ ➌ ➊ Center Stack Finish Panel ➋ Console Finish Panel ➌ Shift Surround Bezel Heat Aging PPA Solution Roof side molding [2016] Ref.

12 Global Awards PBT/ASA/GF 30% AR-5300H Dimensional stability Shrinkage Comparison Weight reduction Part integration AR-5300H 0.8 Ref. (GF) High flowability 2-Shot 3D pattern material technology AR-5300H 0.4 Ref. (GF) [2017] MD Shrinkage [2015] CLTE Comparison Korea NET Certification μ/m C Panorama sunroof frame MFD Cover SPE Automotive Innovation Awards Winner TD Shrinkage MFD Cover INFINO PC + starex Luminous ABS Ref. (GF) AR-5300H AR-5300H Ref. (GF) Passenger Deco Bezel Excellent pattern design with 3D 2-shot layers - Layer 1: Transparent PC - Layer 2: Non-painting Luminous ABS Cost Reduction: Surface finishing process simplification Gearshift Bezel Designed to fit interior parts of the 2018 MY Ford Fiesta Model MD Direction TD Direction Premium non-painting material solution PBT/PET/GF 20% AR-6200 ➊ [2014] SPE Automotive Innovation Awards Winner High flowability World s first premium non-painting material Unit AR-6200 MI 260 C g/10min Spiral Flow (2t) cm Low gravity Paintability Thermal stability INFINO Luminous PC/ABS LX-1098F Flowability (AR-6200) AR-6200 Designed to fit interior parts of the 2015 MY Ford Mondeo Model Paint-free Luminous Solution Performance for Auto Interior Metallic-look Exterior Design: Less Flow-mark & Weld-line UV/Heat Stability Scratch Resistance ➋ ➌ ➊ Center Stack Finish Panel ➋ Console Finish Panel ➌ Shift Surround Bezel Heat Aging PPA Solution Roof side molding [2016] Ref. Korea NET Certification INFINO High Heat Resistant PPA Technology Lightweight metal plating design Long-term heat stability & Shield effect (oxidation blocking) 22 * NET (New Excellent Technology) is South Korea s state-run certification system that recognizes and certifies the country s new technological development in the related fields or dramatic improvement compared with the existing technologies. 23

13 Product Selection Guide Segment Key Application Products Properties Specific Gravity ASTM Physical Properties Mechanical Properties Mechanical Properties Physical Properties Mechanical Properties Thermal Properties Electric Properties Melt Flow Index Mold Shrinkage Tensile Strength Flexural Strength Flexural Modulus Izod Impact (Notched) Hardness Specific Gravity Melt Flow Index Tensile Strength Flexural Strength Flexural Modulus ISO Charpy Impact Hardness VST HDT Test Method ASTM D-792 ASTM D-1238 ASTM D-955 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-785 ISO 1183 ISO 1133 ISO 527-1A ISO 178 ISO 178 1SO 179 1eA ISO ISO 306 ISO 75-2 LAM method Test Condition Natural Color 220 C/10kg 250 C/10kg* 250 C/5kg** 250 C/2.16kg*** 200 C/5kg**** - 50mm/min 5mm/min* 30mm/min** 2.8mm/min 5mm/min* 10mm/min** 30mm/min*** 2.8mm/min 5mm/min* 10mm/min** 30mm/min*** 1/4 1/8 * - Natural Color Unit - g/10min % kgf/cm 2 kgf/cm 2 kgf/cm 2 kgf/cm 2 R-Scale - g/10min MPa MPa MPa KJ/m 2 R-Scale C C Ω cm HP-1000X * ** 22,500** 60* * , I/P Part, Center Fascia PC/ABS (High Impact) HP-1000XA * , * , HP-1000XC *** ** 23,500** *** , Center Console PC/ABS (High Flow) WP * ,500 58* * , WP * ,500 60* * , Center Console PC/ABS (Low Gloss) WP * ,500 62* * , Interior Part PC/ABS (Paint-free) LX-1098F * , * , Globe Box, WP * * 1,200 43, * 83* 135 4, PC/ABS/GF Metal Back Molding WP * ,200* 1,500 62, * 109* 180 7, Interior Part Low Gloss ABS SL , , Interior Interior Part Low Gloss ABS (High Heat) LH * , , SR * , , SR-0310FM * , , SR-0320 K * , , Interior Part High Heat ABS (General Purpose) SR-0320LT * , , SR-0325LT * , , SR-0330M * , , SR-0340M * , , Interior Part PC/ASA (Low Gloss) WR-7250HS * ** 22,500** * , Interior Part Diffusion PC (General) TP * ,500 65* * , Diffusion PC (Light Blocking) TP-1025U (300 C, 1.2kg) **(30) 950***(30) 23,100***(30) 77* (300 C, 1.2kg) , Radiator Grille, WR-9300HF * ,000 15* * 67 2, Side Mirror Housing WR-9330I * ,000 14* , A,B,C Pillar Trim WR-9120 J * ,000 21* , ASA Side Mirror Housing WX-9300UV * ,000 16* , Radiator Grille WX-9310UV * ,000 18* , WX-9330UV * ,000 22* , Radiator Grille Metal Plating ABS MP-0160 R * , , MP **** * , **** , Rear Spoiler ABS (Blow Molding) BM-0320J , , Trunk Garnish Painting ABS PT-0180 H **** * , **** , PT-0180J * , , Radiator Grille High Heat ABS (General Purpose) SR ** 25,000** , Exterior WP-1041G * ,500 55* * , Radiator Grille, Wheel Cover Metal Plating PC/ABS WP * ** 17,800** * , WP * ,000 55* * , Wheel Cover PC/ABS WP * ,000 48* * 54* 75 2, Door Handle, Door Panel PC/PBT AE *** ,000 70* *** , Energy Absorber AE-3063I * ,000 77* * , Radiator Grille PC/PET AE (260 C/5kg) ,000 72* (260 C/5kg) , Body Panel AE (260 C/5kg) ,000 56* (260 C/5kg) , Rear Spoiler PC/PET/MF AE (260 C/5kg) * ,000 6* (260 C/5kg) 63* 100 4, Rear Spoiler AE (260 C/5kg) * ,000 7* (260 C/5kg) 55* 90 3, WR * , * , Radiator Grille, Side Mirror PC/ASA Housing, Roof Rack WX * , * , WX * , * , * Structure Fender & Fuel Filler Door PA/PPE/CNT (High Heat) CA (280 C, 5kg) ,500 20* (280 C, 5kg) , ^5 Panorama Sunroof Frame PBT/ASA/GF AR-5300H ** ,300* 1,900 90,000 9, 8* ** , ASF-9810FM *** * 850* 26,500* *** , Head Lamp Bezel Metallization PBT ASF-9810FL *** , *** , ASF *** * 850* 26,500* *** , LT (300 C, 1.2kg) ,000 75* (300 C, 1.2kg) , Head Lamp Bezel PC 11.5 LT (300 C, 1.2kg) ,000 87* (300 C, 1.2kg) , SR * , , Lighting Rear Lamp Housing High Heat ABS SR-0320 K * , , (General Purpose) SR-0325LT * , , SR-0330M * , , WP * ,500 58* * , Rear Lamp Housing PC/ABS (High Impact) WP * ,500 60* * , HP-1000XG * ,000 55* * , HP-1000XA * , * , Rear Lamp Housing High Heat ASA WR-9330I * ,000 14* , WR * ,000 15* , C/10kg 250 C/10kg* 250 C/5kg** 250 C/2.16kg*** 200 C/5kg**** 50mm/min 5mm/min* 30mm/min** 2mm/min 2.8mm/min* 2mm/min 2.8mm/min* - - B/50 A/50* B/120** 0.45MPa 120 C/hr Volume Resistivity -

Our Solutions At a Glance LOTTE ADVANCED MATERIALS offers Field of Business a wide range of high-quality solutions generating new

Plastics starex Styrene Resin ABS, ABS Alloy, ASA, EPS, SAN Engineering Plastics PC, PC Alloy, PBT, mppe, PA, PPA, PPS, PCT, TPE

The Leader of World-class Styrenic Product Electrical & Electronics Home Appliances IT & Mobile Automotive Lighting & Energy

Engineering Plastics Total Solution for the Future of Automotive 15 31 HQ/R&D South Korea (Uiwang) Countries Bases High Value

China (Tianjin/Dongguan), Mexico (Tijuana), Hungary (Tatabanya), Vietnam (Dong Nai) Sales Corporation China (Shanghai), U.S.A.

14 Our Solutions At a Glance LOTTE ADVANCED MATERIALS offers Field of Business a wide range of high-quality solutions generating new value and innovation in everyday life. Plastics starex Styrene Resin ABS, ABS Alloy, ASA, EPS, SAN Engineering Plastics PC, PC Alloy, PBT, mppe, PA, PPA, PPS, PCT, TPE Construction Materials staron Acrylic Solid Surface Solid Surface Radianz Engineered Stone Natural Quartz Surface Key Industries The Leader of World-class Styrenic Product Electrical & Electronics Home Appliances IT & Mobile Automotive Lighting & Energy Building & Construction Healthcare Furniture, Miscellaneous Sales & Production Sites High Performance and Differentiated Engineering Plastics Total Solution for the Future of Automotive HQ/R&D South Korea (Uiwang) Countries Bases High Value Construction Materials for Upscale Design Eco-friendly Solution for Sustainable Growth Production Plant South Korea (Yeosu), China (Tianjin/Dongguan), Mexico (Tijuana), Hungary (Tatabanya), Vietnam (Dong Nai) Sales Corporation China (Shanghai), U.S.A. (Los Angeles), Germany (Frankfurt), Thailand (Bangkok), Japan (Tokyo) Capacity Employees Worldwide ABS 670K Tons Approx.1,890 PC 240K Tons Acrylic Solid Surface 970K Sheets Sales & Assets (2017) Sales 2.56 USD billion Assets 1.83 USD billion 26 27

15 Global Network HQ (1) Sales Corporation (5) Branch/Sales Office (19) Production Plant (6) Frankfurt Tatabanya Milano Istanbul Dubai Delhi Chennai Bangkok South Korea Uiwang, Yeosu, Gwangju, Busan, Gumi, Ulsan Tianjin Tokyo Weihai, Qingdao Shanghai Suzhou Dongguan Shenzhen Hanoi Dong Nai Kuala Lumpur Jakarta Detroit Los Angeles San Diego Tijuana SOUTH KOREA GLOBAL Uiwang Headquarters Tel: Yeosu Plant Tel: Gwangju Service Office Tel: Busan Service Office Tel: Gumi Sales Office Tel: Ulsan Sales Office Tel: Frankfurt Kornye Milano Istanbul Delhi Bangkok Chennai Sales Corporation Los Angeles, U.S.A. Tel: Frankfurt, Germany Tel: Shanghai, China Tel: Tokyo, Japan Tel: Bangkok, Thailand Tel: Production Plant Tianjin, China Tel: Dongguan, China Tel: Tatabanya, Hungary Tel: Tijuana, Mexico Tel: Branch/Sales Office ASIA Shenzhen, China Tel: Tianjin, China Tel: Suzhou, China Tel: Weihai, China Tel: Qingdao, China Tel: South Korea Hanoi, Vietnam Tianjin Tel: Tokyo Kuala Weihai Lumpur, Malaysia Sanghai Tel: Suzhou Dongguan Jakarta, ShenzhenIndonesia Hanoi Tel: Kuala Lumpur Chennai, India Tel: Jakarta Delhi, India Tel: AMERICA Detroit, U.S.A. Tel: San Diego, U.S.A. Tel: EUROPE Milano, Italy Tel: Istanbul, Turkey Tel: (115) MIDDLE EAST Dubai, U.A.E. Detroit Los Angeles Tel: Tijuana Dong Nai, Vietnam Tel:

16 LOTTE ADVANCED MATERIALS

Automotive Material Solutions. The Future of automotive

Automotive Material Solutions. The Future of automotive Automotive Material Solutions The Future of automotive Contents Product Overview 4 Products 6 Properties Guide 26 Integrated Solutions 28 Global Network 29 We are committed to producing high-performance