Compressioin Sprayer Instruction Manual

Transcription

1 AIROFOG MACHINERY CO., LTD. 1st Fl. Blk.3 No. 67 Lane 1768 Li Yue Road, Minhang Shanghai , China Tel: ~ AIROFOG GERMANY Gladenbacher Weg Biebertal Germany Tel: V AIROFOG USA Skyview Circle Brooksville, Florida USA Tel: Compressioin Sprayer Instruction Manual model: CS-10 CS-14

2 Airofog CS-series compression sprayer 8.5 liter and 10 liter referred to in this document are designed for use by qualified and experienced personnel. Please read this instruction thoroughly before usage. Safety Instruction Keep out of reach of children. Before usage, check condition and proper function of the sprayer. Only pumping up and using sprayer in upright or vertically hanging position. Do not leave sprayer filled with pesticide in the sun. Note the wind direction, do not spray against wind and prevent droplets from drifting onto areas which must not be treated. Never spray into electric outlets or cable boxes. Do not spray to person or pet. Do not operate the sprayer if there are visible symptoms of a problem. Wear personal protective equipment when handling dangerous substances. Application of insecticides should follow recommendations of manufacturers and be in compliance with local regulations controlling the application of pesticides. We are not liable for consequence of improper applications. When unscrewing, never point the lance at others or yourselves. Never blow through clogged nozzles or valves with the mouth. Before repair and maintenance, drain the sprayer and release all pressure. Always replace damaged or malfunctioning parts immediately. Cautions: It is the operator s responsibility to ensure the safe use of sprayer and he is fully compliant with national or local regulations governing compression sprayer and application of pesticide. AIROFOG is not liable for damages or consequences occurred due to improper use/repair/maintenance, the use of non-recommended/unoriginal parts, and acceptance of damaged/broken sprayers by any reason. Operation A) open tank lid release the tank pressure by rotating the twist handle to open position open the tank lid B) filling & mixing chemicals always follow label instructions when mixing insecticides measure liquid quantity to meet actual requirements first fill half of the required water into the tank add the insecticide according to correct proportion close filler opening shake the mixture open filler opening add the remaining amount of water and close filler opening C) close tank lid replace the tank lid and secure position by rotating the twist handle D) pressurize the sprayer unlock the pump handle by turning locking lever pump plunger up and down until the required pressure is reached lock the pump handle by turning locking lever Repair and Spare Part do not modify the sprayer, this may cause a risk of harm and may damage the sprayer if any part shows signs of damage or wear, replace it immediately always use original spare parts for repair or maintenance 1 Compression Sprayer CS-10 / CS-14: V

3 Care and Maintenance A) After using: empty the tank and drain the hose and lance after each use carefully inspect all gaskets and hoses as well as all other fittings of wear and tear,replace when necessary. B) Cleaning the sprayer rinse the tank thoroughly with water add water and detergent into the tank attach pump cap and tighten it shake to clean the tank pressurize the tank flush the hose and nozzle empty the tank and refill with clean water flush the hose and trigger valve once more empty the remaining water the sprayer should be cleaned thoroughly at least once a week C) Cleaning clogged nozzle do not insert metal objects into the tip orifices clean with a soft bristle brush such as a tooth-brush to free clogs cleaning detergents or solvents can be used to soak the tip (do not use ammonia it can corrode brass) soak the nozzle in warm, soapy water blow compressed air through back of nozzle Specification CS-10 CS-14 Working Capacity 8.5 L (2.25 US gal.) 10 L (2.6 US gal.) Tank Volume Filling Lid Tank Material Footrest Max. Working Pressure Pressure Relief Valve Pressure Gauge Pump Handle Pump Cylinder Trigger Valve Nozzle Spray Hose Spray Lance Carrying Strap Service Kit Tank Dimensions Total Height Net Weight 11.4 L (3 US gal.) 4.2 bar (63 psi) Ø20 x H46 cm (Ø7.9 x H18.1 in) 57 cm (22.5 in) 4.8 kg (10.6 pound) Specifications subject to change without notice or obligation. side filling, oval, 94 cm 2 (14.6 in 2 ) stainless steel AISI cm 2 (7.8 in 2 ) operate at 4 bar (60 psi) 0-7 bar (0-100 psi) stainless steel AISI 304, T-type 13.6 L (3.6 US gal.) 3.8 bar (55 psi) stainless steel AISI 304 with spring-loaded Viton TM seat non-return valve brass, heavy-duty type with lock-on & lock-off features even flat fan nozzle 8002E 150 cm (59 in) stainless steel AISI 304, 50 cm (20 in) double woven heavy duty, 5 cm wide (2 in) supplied as standard: pump kit, trigger valve kit, seal/gasket kit Ø20 x H54 cm (Ø7.9 x H21.3 in) 65 cm (25.6 in) 5.1 kg (11.2 pound) D) Maintenance of pump and trigger valve pump cup (1.7) and trigger valve o-ring (9.6) should be oiled from time to time check valve at the bottom of the pump cylinder prevents liquid from entering the pump, if liquid leaks into the pump, the valve should be inspected or replaced if liquid leaks out of the trigger valve or any connection, the valve seal/gasket or the connection should be inspected or replaced if air leaks can not be easily located, test the fitting by applying a soapy solution 3 Compression Sprayer CS-10 / CS-14: V

4 Compression Sprayer CS-10 / CS-14 POS. PART NO. DESCRIPTION Pump Assembly Plunger Assembly 1.1/C Plug x Rod Spring Cap Spring Pump Cup Assembly (S.S UPP) Adapter (for S.S. UPP) Upper Piston Plate (S.S UPP) Pump Cup Lower Piston Plate Spring Washer Nut Gasket, Viton Pump Cylinder Assembly Pump Cylinder S.S Sealing Plate Valve Seat Spring Nut Pressure Gauge Gasket Pressure Relief Valve Tank (CS-10) Tank (CS-14) 4/ Nozzle Protection Pad Carring Strap Tank Lid Assembly Tank Lid Twist Handle Cover Seal Valve Pin Assembly Valve Pin Spring Cotter Pin Cover Chain 5 Compression Sprayer CS-10 / CS-14: V

5 Compression Sprayer CS-10 / CS-14 POS. PART NO. DESCRIPTION Ring Spring Washer Lock Nut Hose Clamp Hose 1.5m Hose Adapter Supply Tube CS Supply Tube CS O-Ring Trigger valve, Assembly Handle S.S Strainer O-Ring Valve Body O-Ring (x2), Viton Stem Guide Sealing Plate Seat Spring Gasket, Viton Cap Trigger Pin Gasket,PE Locking Ring Spray Lance, Straight S.S Nozzle Cpl. 11.2/ In-line Filter Fan Nozzle 8002E Nazzle Cup Pump Service Kit ( / x2) Trigger Valve Service Kit ( x2+8.2) Tank Lid Service Kit ( ) Instruction Manual 7 Compression Sprayer CS-10 / CS-14: V

6 CONVERSION FACTORS: NOTE: 1 yard = 3 feet = 0.91 metre 1 metre = inches = 1.09 yards 1 metre/sec = miles per hr = ft/min 1 US gal = 0.83 Imp gal = 3.78 litres 1 Imp gal = 1.20 US gals = 4.54 litres 1 litre = 0.26 US gal = 0.22 Imp gal 1 US pint = 16 US fl ounces = 0.47 litre 1 Imp pint = 20 Imp fl ounces = 0.57 litre 1 pound = 16 ounces = 0.45 kilogram 1 kilogram = 2.20 pounds = 35.3 ounces 1 ounce = grams 1 pound/sq inch = atmosphere = bar 1 atmosphere = pounds/sq in = 1.01 bar 1 bar = pounds/sq in = 0.98 atmosphere 1 kilopascal = 0.01 bar = pounds/sq in 9 Compression Sprayer CS-10 / CS-14: V