X-ray Inspection. X-ray Inspection. making your products safer SAFELINE. X-ray Inspection Systems Contaminant Detection Quality Assurance

Transcription

1 X-ray Inspection SAFELINE Metal Detection & X-ray Inspection X-ray Inspection Systems Contaminant Detection Quality Assurance X-ray Inspection making your products safer

2 X-ray Inspection X-ray Systems for Contaminant Detection and Quality Assurance METTLER TOLEDO SAFELINE, the worldwide leader in production line metal detection, now brings its product inspection expertise to x-ray systems with the most reliable machines available. Depending on the specific model chosen, Safeline X-ray Inspection systems can detect metal, glass, bone, and stone contaminants and also insure portion control, product quality and package integrity. Electronically controlled, low energy x-ray generators and powerful data and image analysis systems insure detection of even the most minute product variations that could result from either contamination or deviation from established quality standards. Optional, fully-integrated reject mechanisms can automatically remove these products from your line. All Safeline X-ray Inspection systems meet the strictest safety standards and operate on an XP Pro platform with 65,000 grey scale imaging with sealed, high resolution LCD touch-screen operator interfaces. With over 25,000 food and pharmaceutical product inspection units in the field, only Safeline has the experience, the in-house experts and breadth of product line to help you decide if x-ray inspection is right for you -- and, because we manufacture both metal detection and x-ray equipment, our only interest is to insure that you get the right system for your application. X-ray Safety Safeline X-ray Inspection systems use low energy, electrically generated x-rays that are fully contained to the highest standards in the industry in order to protect plant workers and leave inspected products unaffected. Each system exceeds the US Food and Drug Administration (FDA) requirements that the radiation emitted from a cabinet x-ray system not exceed an exposure of 0.5 millirads in one hour at any point 5cm from the external surface. This is significantly lower than everyday exposure from the natural environment. Every Safeline X-ray Inspection system is tested by approved, certified auditors before leaving the manufacturing facility.

3 X-ray Inspection AdvanChek A powerful and economical way to introduce x-ray inspection to your production lines, AdvanChek utilizes a single vertical x-ray beam for detection of contaminants such as bone, stone, metal, glass, and high density plastics. PipeChek PipeChek, with an integral pipeline, is designed specifically to inspect fluids and semi-solids for contaminants such as bone or variation from established standards. PipeChek uses a single x-ray beam, and is available in four standard pipe sizes (2", 2.5", 3", or 4") with other diameters available as options. PipeChek is rated to NEMA 4X standards for the harshest of sanitation environments. PowerChek PowerChek uses a single vertical x-ray beam for inspection of conveyorized packaged products. PowerChek inspects for contaminants such as metal, stone, bone, glass and high-density plastics, and can also check product mass.

4 PowerChek Plus PowerChek Plus uses a single vertical x-ray beam for inspection of packaged and bulk products. PowerChek Plus inspects for contaminants such as metal, stone, bone, glass and high-density plastics and can check product mass, overfill and underfill and for missing or damaged products. CaseChek CaseChek uses a dual vertical x-ray beam to inspect large conveyorized cartons, cases, and loose products. CaseChek inspects for contaminants such as metal, stone, bone, glass and high-density plastics and can check product mass, overfill and underfill and for missing or damaged products.

5 SideChek - uses a single horizontal x-ray beam for inspection of vertically-oriented packages and composite plastics. SideChek inspects for contaminants such as metal, stone, bone, glass and high-density plastics and can check product mass and overfill and underfill. CanChek - uses a single split horizontal x-ray beam with two detectors for inspecting cans. CanChek inspects for contaminants such as metal, stone, bone, glass and high-density plastics and can check product mass, overfill and underfill and for missing or damaged products. GlassChek - uses a dual horizontal x-ray beam with two detectors for inspection of jars and other glass containers for contaminants such as metal, stone, bone, glass and high-density plastics. It can also check product mass, overfill and underfill and for missing or damaged products. Safeline's patented detection and analysis software provides the best glass-in- glass inspection in the industry. All Safeline X-ray systems feature: Automatic set-up in under two minutes and self-calibrating Operative-intuitive touch screen for easy operation Fully customized conveyors A full complement of optional reject devices Rated to NEMA 12 standard with an option of NEMA 4X for heavy washdown environments (PipeChek rated to NEMA 4X standard) External Ethernet and USB port allows easy communication and data reporting

6 Safeline X-ray Inspection can improve your bottom line Best product inspection performance at high line speeds Improve product satisfaction and customer retention Increase market share through increased customer confidence New business acquisition where assured quality is a key customer requirement Download our white paper on Contaminant Detection: Making the Right Choice at Safeline - Making your products safer. Mettler-Toledo Safeline, Inc. Metal Detection & X-ray Inspection 6005 Benjamin Road Tampa, FL USA Tel: Fax: safeline.sales@mt.com 01/07 Mettler-Toledo Safeline, Inc. Printed in USA For more information