Advanced Inspection: Tractor - Row Crop Wheeled

Transcription

1 Key: G - Good A - Average P - Poor Advanced Inspection: Tractor - Row Crop Wheeled Inspector:Russ Elliott Date Inspected:Jun 7, 2014 Prepared For:Fahey Sales Location:Glencoe, MN Make:McCormick Model:XTX215 Serial Number:JJE Hours Shown:1926 Brief Description: McCormick XTX215 MFWD tractor, 16 speed power shuttle transmission, 3 remotes, 2 speed PTO (3shafts), rock box, right side door, front fenders, bar axle, Firestone 18.4R46 rear singles, 420/90R30 front tires. ENGINE Engine Oil Level and Condition Coolant Level and Condition Oil, Fuel, or Coolant Leaks Radiator, Cap, Hoses, and Connections Fuel System Air Intake/Filter Manifold, Muffler, and Exhaust Systems Fan and Belt Condition Water Pump Condition Exhaust Smoke Unusual Noise High/Low Idle Speed Turbo Inspection Dirty air filter TRANSMISSION AND DRIVE SYSTEM Transmission Oil Level, Filter, and Condition Front Axle Fluid Levels and Condition Driveline, U-Joints, and Hanger Bearings Front Axle Hub Oil Level and Condition Proper Shifting Drive Test Right side front axle leak? See pic. Probably from being over full.

2 TRANSMISSION AND DRIVE SYSTEM Parking Brake Operation and Condition Axle/Drive Condition Brake Operation and Condition Clutch Operation and Condition Presence of Oil Leaks Visual Rim and Hardware Inspection Tire Condition Differential Lock Operation Steering Operation Steering System Visual Inspection Front 90%; Rear 95% Pump Condition Hose Condition Tank/Reservoir Condition Valves Leaks HYDRAULIC SYSTEM Battery and Cable Visual Inspection Starter Operation Charging Operation Heat and A/C Function Field and Road Lights Turn Signals ELECTRICAL Instrumentation and Warning Systems Wipers and Washers Radio Operation Cab Condition Seat Operations and Condition Controls ROPS Visual Inspection CAB

3 GENERAL CONDITION Exterior Condition Paint Condition Decals Intact Shields Intact ATTACHMENTS PTO Operation and Visual Inspection Rear Hydraulic Operation and Visual Inspection 3 Pt. Operations and Visual Inspection Loader Frame and Bucket Loader Cylinders, Hoses, Lines, and Valves Inspector Comments Yes No Overall Rating Qualifies for Extended Service Plan This is a good looking tractor. Appears to be very sound. Inspector Signature Russ Elliott

4

5 Disclaimer If you do not agree with the terms and conditions of this Disclaimer, for any reason, or if you are not a legal adult age 18 years of age or older, do not rely on this Inspection Report. You unconditionally agree to the foregoing terms by ordering issuing payment for this inspection report. This report is for information only and is not to be considered a recommendation or endorsement for or against the purchase of the inspected item. Many aspects of the inspection are subjective. Therefore, the inspector is merely providing you with his or her opinion. If you were to perform the inspection yourself, you might come to a different conclusion than the inspector. Therefore, any liability is strictly limited to the amount charged for this report and Machinery Scope, LLC, is not responsible for any indirect, special or consequential damages or loss of any kind beyond the fee paid for this report. This inspection report is intended solely as a visual evaluation of components inspected at the time and date of examination. There are no implied or expressed warranties or guarantees of any kind in connection with this inspection report. Machinery Scope, LLC, specifically disclaims any liability for any loss or damage arising in connection with ownership or operation of said inspected item and further disclaims any liability of any hidden collision, flood damage, or tampered components not readily apparent. Further disclaimed is any liability for any damage or defects not found during this inspection. Other conditions may exist which did not occur or appear during inspection and are not the responsibility of Machinery Scope, LLC. Changes in the item inspected can occur and/or manifest themselves between the time it is inspected and when the item is actually purchased, operated, or used, including, without limitation, physical and mechanical damage, wear and tear, owner modifications and/or substandard repairs. These changes may detrimentally impact the value and/or desirability of the item that is the subject of this report. The likelihood of such changes occurring increases the longer the elapsed time between the inspection and purchase, operation, or use. Inspection reports prepared by Machinery Scope, LLC, do not provide any opinions and/or verifications of legal title, ownership, or legal possession of the item being inspected. Machinery Scope, LLC, does not verify, check, confirm, represent, warranty, or guarantee that the person in possession at the time we inspect the item has legal title, ownership, or legal possession of the inspected item. It is understood that the inspected item may qualify for an Extended Service Plan or Extended Warranty. Machinery Scope, LLC, specifically disclaims any liability for claims, reimbursements, or any other policy term of an Extended Service Plan or Extended Warranty that is purchased in conjunction with or as a result of the Inspection Report. Machinery Scope, LLC, is responsible only for the content of the Inspection Report. All terms, conditions, and claims reimbursements related to an Extended Service Plan or

6 Extended Warranty are made available through, and are the sole responsibility of, the third party entity who prepared and is liable to carry out the Plan or Warranty. This inspection report is prepared solely for the person or entity who purchased the report directly from Machinery Scope, LLC, its agents or assigns. If a party other than the person or entity who purchased this report relies on this report in any way, that party is hereby put on notice that Machinery Scope, LLC, intends for this report to be relied upon solely by the person or entity who purchased this report directly from Machinery Scope, LLC, its agents or assigns. Therefore, anyone who relies on this report that did not purchase this report directly from Machinery Scope, LLC, its agents or assigns, shall have no claim to hold Machinery Scope, LLC, liable for any special indirect, punitive, cover, incidental, or consequential damages, however caused, in contract or tort, or any other theory of liability. In the event that any one or more of the provisions of this Agreement shall be held invalid, illegal, or unenforceable in any respect, such provisions shall be adjusted rather than voided, if possible, in order to achieve the express intent of the parties involved; and in any event, the validity, legality, and enforceability of the remaining provisions contained herein shall not in any way be affected or impaired thereby.