ARBUTUS WEST AGENCY LIMITED

Size: px

Start display at page:

Download "ARBUTUS WEST AGENCY LIMITED"

Harry Kelly
5 years ago
Views:

1 ARBUTUS WEST AGENCY LIMITED 800A S.E.E. SO# KIOSK DOCUMENTATION *****DO NOT REMOVE FROM CABINET***** Valid Manufacturing Ltd. Advanced Technologies Simple Solutions

2 TABLE OF CONTENTS TABLE OF CONTENTS...SECTION 1 KIOSK INSTALLATION INSTRUCTIONS...SECTION 2 GENERAL MAINTENANCE GUIDE...SECTION 3 KIOSK MATERIAL LIST AND SPECIFICATIONS...SECTION 4 WARRANTY...SECTION 5 AS BUILT DRAWINGS...SECTION 6

3 KIOSK INSTALLATION INSTRUCTIONS Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Clean bottom lip of kiosk and apply a bead of appropriate NON- SILICONE sealant / adhesive. Clean kiosk base as per sealant manufacturer's instructions. Set kiosk and apply an additional bead of sealant around base. Examine mounting base inside kiosk (conduit/cable entry location) for areas of exposed soil. Any areas not enclosed in concrete must be sealed to prevent condensation. Secure kiosk to base. Remove lifting lugs and replace bolts in original holes. Due to vibration caused by transportation of this equipment, all electrical connections should be inspected for loosening and retightened to the appropriate torque setting.

4 GENERAL MAINTENANCE GUIDE The kiosk should be checked and cleaned every 6 to 12 months (depending on location) to help keep it tidy and operating efficiently. Step 1 - If unit is equipped with fan(s), remove fan housings or guards and clean or replace filter (this filter prevents dust from blowing into cabinet when fan is not in operation). Step 2 - If unit is equipped with air filters, open bottom filter housing and replace filter. Replacement filters can be purchased from Valid Manufacturing. Step 3 - If unit is equipped with transformer(s), remove the front cover and vacuum any dust or debris. Tighten all transformer connections and replace the cover. Step 4 - If unit is equipped with lights, inspect all light bulbs and replace if required. Spare lamps can be purchased at any lighting supply house or at a local hardware store. Step 5 - Wash the inside walls with window cleaner and soft paper towel. Do not attempt to use pressurized air to clean any part of the kiosk, especially the electronic devices. Compressed air could force particles into the equipment and may cause the equipment to fail. Consult the equipment manufacturer's documentation for proper cleaning instructions.

5 KIOSK MATERIAL LIST STOCK # or DESCRIPTION SUPPLIER VENDOR PART # KSD-31 ROLLER, DOOR LATCH VALID MANUFACTURING KGP12B-70 RAIL, DOOR LATCH, 70in VALID MANUFACTURING VSP1P080A DOOR HANDLE, PADLOCKABLE VALID MANUFACTURING CMDL3800F MDL3800F BREAKER FRAME, 800A 3P, 100 % RATED (-10 KIOSK ONLY) BREAKER FRAME, 800A 3P, 80 % RATED (-N ONLY) WESCO DISTRIBUTION WESCO DISTRIBUTION MES3800LSI BREAKER TRIP UNIT 800A, CUTLER HAMMER WESCO DISTRIBUTION 8MES800T BREAKER RATING PLUG, CUTLER HAMMER WESCO DISTRIBUTION TA801MA TERMINAL KIT, M FRAME BREAKER, 800A, DOUBLLE MCM WESCO DISTRIBUTION TA-250I LUG, SINGLE, 250 MCM 6, ALCU EECOL ELECTRIC AU-250I LUG, DOUBLE, 250 MCM 6, ALCU EECOL ELECTRIC AU-350I LUG, DOUBLE, 350 MCM 6, ALCU EECOL ELECTRIC AU-600I LUG, DOUBLE, 600 MCM EECOL ELECTRIC HLK4 SN TAB, LOCKOUT PADLOCKABLE FOR BREAKER NEUTRAL KIT, 100A, ISOLATED, SQUARE D WESCO DISTRIBUTION GUILLEVIN INTERNATIONAL ACURRENT TRANSFORMER *BC HYDRO VOLTAGE TRANSFORMER *BC HYDRO *Parts supplied by BC Hydro.

7 Page 1 of 4

8 Page 2 of 4

9 Page 3 of 4

10 Page 4 of 4

14 Page 1 of 2

15 Page 2 of 2

17 LIMITED WARRANTY Standard Warranty WARRANTY TERMS: 1. Coverage - This warranty applies to the original purchaser and subsequent owners, subject to the approval of Valid Manufacturing Ltd. (hereafter, referred to as VML). 2. Warranty Period - The warranty period of 12 months begins on the satisfactory commissioning of the system. 3. Defects - This warranty covers repairs to correct any malfunctions occurring during the warranty period resulting from defects in material or workmanship. 4. Repairs - To obtain warranty repairs, you must request the required repairs within the warranty period from VML. On site warranty and repair service will be provided by Valid or its authorized representative. VML will endeavor to perform the requested repairs in a reasonable amount of time. However, there may be situations where the warranty repairs may be performed by the owners organization or a third party. Reasonable parts and labor cost (as determined by VML) will be reimbursed. Labour rates and estimate of required time will be confirmed and approved prior to the commencement of the repair work. 5. Service Supplies - Any supplies used during servicing which become unusable because of required warranty repairs are covered by this warranty. 6. Shipping Charges - Any charges incurred for the shipping of parts from VML to the repair location which needs emergency warranty repairs to be made operational are covered under this warranty, but must first be approved by VML. THIS WARRANTY DOES NOT COVER: Additional Labour. Labour required to render VML components accessible for required warranty service Maintenance: Repairs and service adjustments caused by accident, misuse, negligence, abuse, non-authorized modifications, damage, fire, parts not supplied by VML, failure to perform required maintenance, and failure to perform modifications as requested by VML. Other Expenses: Any economic loss, including communication expenses, meals, lodging, loss of operation, loss of revenue, loss of time, inconvenience, or any other cost or expense resulting from a defect covered by this warranty. OTHER LIMITATIONS EXCEPT FOR THE WRITTEN WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF PERFORMANCE OR FITNESS FOR A PARTICULAR PURPOSE WHICH SHALL APPLY TO PRODUCTS SUPPLIED BY VML. VML HEREBY DISCLAIMS ANY AND ALL SUCH WARRANTIES THE PERFORMANCE OF REPAIRS IS THE EXCLUSIVE REMEDY UNDER THIS WARRANTY NO PERSON IS AUTHORIZED TO MODIFY THIS WARRANTY OR TO ASSUME ANY OTHER LIABILITY ON BEHALF OF VML UNLESS THE MODIFICATION IS MADE IN WRITING AND SIGNED BY AN AUTHORIZED VML REPRESENTATIVE. THE OBLIGATIONS OF VML SHALL NOT EXTEND BEYOND THE OBLIGATION EXPRESSLY UNDERTAKEN HERETO AND VML SHALL HAVE NO LIABILITY OR RESPONSIBILITY OR OTHERWISE TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE WARRANTY CLAIMS: 1. Claim Notification - To make a claim, the claimant must contact VML and request an RMA (Return Material Authorization), stating the part number and, if possible, the enclosure number. An authorization number will be supplied to the claimant. 2. Time Limit - The claimant must notify VML of any defect occurring during the warranty period within 30 days from the date the defect becomes apparent. Out-of-date claims are subject to rejection 3. Reimbursement - VML will reimburse the claimant for the cost incurred in the repair or replacement (including shipping) of defective parts. The reimbursement will be based on the number of required man-hours at a pre-approved base rate 4. Parts to be Returned - All parts must be returned to VML for warranty approval and processing. The assigned RMA number must be attached to the part. RETURN TO: Valid Manufacturing Ltd Ave SE Salmon Arm, BC V1E 1X2 CANADA

HSIV PLOW OPERATOR S MANUAL

HSIV PLOW OPERATOR S MANUAL PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com JANUARY 2015 THE INFORMATION CONTAINED IN