Portfolio. FOOD Catering and Manufacturing. Temperature

Transcription

1 Portfolio FOOD Catering and Manufacturing Temperature

2 temperature Food Pocket Catering Thermometers and Manufacturing Checktemp Range Check out HANNA Checktemps High accuracy Calibration feature Pocket dimensions Simple to use Quick accurate temperature measurement Complete with unique calibration check feature, Hanna Checktemps are some of our best selling pocket thermometers. Each model in the range is small, compact and comes complete with the unique Hanna Cal Check to confirm the accuracy of your measurements time after time. All models are supplied complete with probe, battery and full operating instructions. Main benefits 100% accurate, whatever the viewing angle Ideal for spot checks Instant measurement to HACCP requirements Small, lightweight, easy to clean Specifications Product Code Checktemp (HI 98501) Checktemp1 (HI 98509) Checktemp Dip (HI ) Range to C to C -20 to 100 C Resolution 0.1 C 0.1 C 0.1 C Accuracy ±0.3 C (-20 to 90 C) ±0.5 C ±0.3 C (-20 to 90 C) ±0.5 C ±0.3 C (-20 to 90 C) ±0.5 C (outside) (outside) (outside) Probe Fixed stainless steel 105 x dia 3 mm stainless steel probe with 1 m cable Battery Type 1 x 1.5V 1 x 1.5V AAA 1 x 1.5V AAA Battery Life approx hours of continuous use approx hours of continuous use weighted probe with fl exible 3m cable approx hours of continuous use Environment 0 to 50 C ; RH max 95% 0 to 50 C ; RH max 95% 0 to 50 C ; RH max 95% Dimensions 66 x 50 x 25 mm - meter only Ideal for Semi-solids and liquids Incoming and outgoing goods Chilled and frozen food Food preparation and production Restaurants and outside catering 106 x 58 x 19 mm 106 x 58 x 19 mm Weight 50 g 80 g 80 g 100% reassurance with Hanna Cal Check Hanna s exclusive Cal Check, saves time and brings peace of mind to users in busy catering environments. In hot kitchens, fast production lines and hectic retail environments, few operators have the time to keep checking the accuracy of their meters. With the Hanna Cal Check, you can verify the accuracy of your meter in seconds - each and every time it is used. Activated by a simple switch, the Cal Check simulates an ice bath of 0.0 C giving a confi rmed base reading from which to test. With a tolerance limit of +/- 0.4 C, you can be completely confi dent that your measurements are accurate.

3 temperature temperature Checktemp1 Easy read digital display Simple to use with direct probe Checktemp 1 is a high accuracy thermometer with a 1m fl exible cable for easy access in hard-to-reach locations. The sharp-tip stainless steel probe is designed to easily penetrate semi-solid products such as fruit, vegetable and cheese. It can also be used for taking measurements in liquids, air and frozen materials. Using a thermistor sensor to deliver high levels of accuracy with speed and effi ciency, Checktemp 1 is ideal for routine controls and checking incoming and outgoing goods. Sharp-tip probe for easy penetration Fast response in liquids, air, frozen & semi-solids Checktemp Checktemp Dip Pocket thermometers Checktemp offers high accuracy over a wide range. A compact meter with a direct probe, it is ideal for taking quick-fi re temperature measurement in semi-solids and liquids. Easy read digital display whatever the viewing angle Simple to use with direct probe Supplied with Penetration probe and cable (integral to meter) Battery and instructions Checktemp Dip is a highly accurate thermometer with a wide temperature range of -20 C to +100 C. The stainless steel probe is weighted and attached to a fl exible 3m cable, making it ideal for dipping into any vat or tank to measure the temperature at different depths. Ideal for checking temperature inside wine casks and milk tanks Weighted probe to test temperature at different depths Supplied with Penetration probe and protective cap Battery and instructions Extra long cable for larger vats and containers Checktemps Supplied with Weighted probe and 3m cable Battery and instructions Food Catering and Manufacturing temperature

4 Pocket thermometers part no: HI 145 part no: HI temperature temperature Specifications temperature Food Catering and Manufacturing Unbeatable combination! High accuracy Ultra wide range: -50 C to C All in one pocket thermometers Handy T-shaped thermometer with extended temperature range: HI 145 Measure ice-cream to hot oil without sacrificing accuracy with this great T-shaped thermometer. Quick and easy to use, the sturdy design and strong stainless steel probe makes this meter ideal for testing semi-frozen foods as well as hot oil. With its easy clean white waterproof casing and automatic shut-off after 8 minutes, this model is particularly appropriate for inspections and fasttest routines. Main benefits Pocket thermometer with high accuracy for busy kitchens: Extra wide temperature range: up to 220 C High accuracy: up to +/- 0.3 C Waterproof casing sealed against water and steam Automatic shut-off after 8 minutes Product Code HI 145 HI Range to +220 C to 220 C Resolution Accuracy Probe 0.1 C (-50.0 to C) 1 C (200 to 220 C) ±0.3 C (-20.0 to C); ±0.4% F.S. (outside) stainless steel 125 x dia 5 mm Battery Type 1 x 1.5V AAA 1 x 1.5V AA Battery Life approx hours of continuous use; auto-off after 8 minutes of non-use 0.1 C (-50.0 to C) 1 C (200 to 220 C) ±0.3 C ±1 digit (-20.0 to 90.0 C); ±1% F.S. ±1 digit (outside) stainless steel, with penetration tip, 117 x dia 3.5 mm hours of use; auto-off after 8 minutes of non-use Environment -10 to +50 C ; RH max 95% 0 to 50 C ; RH max 95% Dimensions 92 x 165 x 38 mm 165 x 50 x 20 mm Weight 65 g 100 g Popular pocket meter with folding probe : HI Ideal for spot checks and measuring extreme temperatures, the Hanna folding thermometer is a great favourite across the food industry. Extra high range great for hot oil and deep frying The meter is automatically activated by opening the folding probe Angled degrees of opening allows probe to be inserted into foods from different directions Probe folds back into the case for safe storage Main benefits The HI 151 folding thermometer complies in full with requirements of food legislation on accuracy: Built-in Cal Check performs calibration check each time meter switches on Wider than standard temperature range of -50 C to +220 C No need for separate calibration test plugs Easy clean design

5 temperature temperature Ultra high to 600 C Best for high temperatures Fixed probe on flexible cable Large easy read display Hygienic white water proof casing Single rubberised button operation designed for use in hot steamy kitchens Coiled cable for compact storage Accessories Fixed HI 766C penetration probe on 1m flexible cable supplied as standard Hanna offers a range of accessories for temperature testing. Rubber boot offers impact protection Coloured options available: Orange: HI Blue: HI NB: Boot not included Thermometer with fixed K-type probe Specifications Product Code HI part no: HI Recommended for testing at ultra high temperatures This is a great portable thermometer designed to measure temperatures as high as 600 C. Supplied complete with a fixed penetration probe on a flexible 1m cable, it is extremely popular in catering, food preparation and restaurants. The meter is lightweight and easy to hold and comes at a particularly attractive price making it possible for every chef or user to carry his or her own instrument. Fast response time: with 0.1 resolution up to and 1.0 above. Key features Stability indicator % battery power displays on start-up plus battery error prevention system Supplied with HI 766C temperature probe 3 x AAA batteries Range to C; 200 to 600ºC Resolution Accuracy Probe Battery Type 1.5V AAA (3) Battery Life Environment Dimensions Weight 0.1 C (up to 199.9ºC); 1ºC (outside) ±0.2% full scale (excluding probe error) HI 766C penetration, stainless steel K-type thermocouple temperature probe with 1 m (3.3) cable (fi xed) approximately 1000 hours of continuous use; auto-off after 8 minutes of non-use -10 to 50 C (14 to 122 F); RH max 100% 152 x 58 x 30 mm 205 g Food Catering and Manufacturing temperature

6 Portable Lumberg food thermometer part no: HI 93502P temperature temperature Professional use temperature Food Catering and Manufacturing The Hanna Lumberg food thermometer accepts Lumberg type probes. It is designed for the professional user with a fully waterproof case, protected display and rubber On/Off keypad. The screw-in Lumberg probe connector can be used with a wide range of probes including between pack, surface, liquid and food simulant block probes. Automatic calibration check built-in Operating automatically at 0 C when the meter is switched on, the Hanna Cal Check means there is no need to buy a separate calibration test plug. This not only saves time and money, but also ensures that the meter is working correctly each and every time it is switched on for use. Separate Hanna calibration test keys are available as optional extras to test the reading of the meter at a different temperature. Simply select your temperature, plug the appropriate test key into the probe input and check that the reading on the display matches that on the test key. Supplied with HI 762PW/LUM temperature probe 3 x AAA batteries Specifications Product Code Range Resolution Accuracy Probe HI 93502P -20 to +120 C 0.1 C +/-0.5 C including probe error Supplied with HI 762PW/LUM Penetration probe Battery Type 1.5V AAA (3) Battery Life approximately 2000 hours of continuous use Dimensions Weight 152 x 58 x 30 mm 205 g Probes for different applications The Hanna Lumberg food thermometer can be used with a range of probes for different applications. All of these can be changed quickly and easily without re-calibration. Between pack probe part no: HI 762BP/G/LUM Simulant block probe part no: HI 762FS/LUM Protective rubber boots - optional accessories part no (Orange): HI part no (Blue): HI Lumberg connector Screw lock Interchangeable with other Lumberg meters Air wire probe part no: HI 762W/LUM

7 temperature temperature Designed for the food industry Lumberg connector Range of interchangeable probes Compact robust handheld Integrated Cal Check Wide range: high accuracy Narrow, lightweight case makes meter easy to carry and have constantly on-hand Good sized display ensures readout is clearly visible at a glance Bigger screen allows supporting information and user instructions to be displayed Large single operation button means it is easy to operate in one hand Waterproof casing and rubberised keyboard makes sure the meter is not just splash proof but can resist hot humid conditions HI 762PW/LUM general purpose Lumberg penetration probe supplied as standard Accessories Portable Lumberg food thermometer UKAS and ISO9001 calibration certificates available Ask for details when you place your order part no: HI 93502P Hanna offers a range of accessories for temperature testing. Food Catering and Manufacturing temperature

8 General purpose food thermometer part no: HI 9241P temperature Food Catering and Manufacturing Designed for use with foods and with a particularly wide temperature measurement ranging from -50 C to C, the Hanna general purpose food thermometer is popular across the industry. Light, compact and easy to handle, it offers a range of benefi ts for chefs and kitchen staff working in food production and preparation. Narrow, lightweight case makes it easy to pop in a pocket and have constantly on-hand Good sized display ensures readout is clearly visible at a glance Bigger screen allows supporting information and user instructions to be displayed Large single operation button means it is easy to operate in one hand Waterproof casing and rubberised keyboard makes sure the meter is not just splash proof but can resist hot humid conditions Supplied with HI 765PW temperature probe 3 x AAA batteries temperature temperature Dedicated for use with food Compact robust handheld Interchangeable probes Integrated Cal Check Wide range: high accuracy Probe connection at base of instrument for greater r flexibility Single pin phono connector No need to align pins Ideal for frequent probe changes HI 765PW general purpose penetration probe supplied as standard

9 temperature temperature Probes for different applications The Hanna general purpose food thermometer can be used with a range of probes for different applications. All of these can be changed quickly and easily without requiring re-calibration. Between pack probe part no: HI 765BP/G Simulant block probe part no: HI 765FS Automatic calibration check built-in Air wire probe part no: HI 765W Full temperature monitoring Food log book part no: FOODLOGBOOK Food safety Choose colour coded options for enhanced food hygiene: part nos: Blue - HI 9241PB Red - HI 9241PR Green - HI 9241PG Operating automatically at 0 C when the meter is switched on, the Hanna Cal Check means there is no need to buy a separate calibration test plug. This not only saves time and money, but also ensures that the meter is working correctly each and every time it is switched on for use. Separate Hanna calibration test keys are available as optional extras to test the reading of the meter at a different temperature. Simply select your temperature, plug the appropriate test key into the probe input and check that the reading on the display matches that on the key. Accessories Hanna offers a range of accessories for temperature testing. UKAS and ISO9001 calibration certificates available Ask for details when you place your order Specifications Product Code HI 9241 Range to C Resolution 0.1 C Accuracy Probe Battery Type 1.5V AAA (3) Battery Life Dimensions Weight General purpose food thermometer +/-0.4 C between -20 and +80 C and +/-0.3% full scale HI 765PW general purpose/penetration, stainless steel thermistor temperature probe with white handle and 1 m cable (included) approximately 2000 hours of continuous use; auto-off after 8 minutes of inactivity 152 x 58 x 30 mm 205 g part no: HI 9241P Food Catering and Manufacturing temperature

10 temperature Food Catering and Manufacturing farm from to Datalogging The need to monitor temperature is integral to food production throughout the industry in order to meet stringent health and safety regulations. From farm to fork, food safety requirements insist that the temperature of storage systems is constantly monitored and regularly checked. From raw ingredients to fi nished products, all foods must be stored, delivered and prepared in optimum conditions for a safe, healthy shelf life. Grain silos, milk vats, haulage and distribution units, frozen stores, chiller cabinets, heated serveries, airline catering, meals on wheels deliveries the list is endless, but the need remains the same. All require 24-hour data monitoring and collection to ensure that temperatures remain accurate and constant. Dataloggers collect this type of data effi ciently and accurately. On activation, the meter is instantly deployed and can then be left unattended to measure and record the temperature of the storage environment over a set monitoring period. Logging intervals and delays can be selected to meet the demands of different applications. Data is automatically collected, stored and tamper-proof. fork Programmable high and low alarm points allow the operator to be alerted if temperatures should rise above or fall below acceptable safe limits.

11 temperature temperature Hanna dataloggers help maintain a rigorous temperature monitoring schedule Wall cradle and padlock included Main Benefits Programmable high and low alarm points Store up to 4000 temperature samples Password protection to prevent unauthorised tampering IP65 water and dust protection Two-year continuous use battery Clear LCD display with choice of or reading USB cradle & wall cradle with padlock included USB connection for download and analysis of results Low cost, miniature discreet This great little meter offers a fantastic low cost solution for use across a wide range of applications. It has an extensive memory and offers excellent security measures yet is still small enough to be easily hidden. Ideal for Mini temperature data logger Discreet temperature monitoring Storage and transport of frozen foods Specifications Product Code HI 143 Range Resolution Accuracy Typical EMC Dev. Calibration Data Logging Logging Interval Battery Type Battery Life Protection Dimensions to +70.0ºC 0.1 C / 0.1 F ±0.4 C (-20 to +60 C); ±0.6 C (outside) ±0.3 C / ±0.5 F Factory calibrated Up to 4000 samples User selectable, from 1 minute to 24 hours 1 x CR2032 3V lithium battery 2 years IP 65 (watertight) 60 x 37 x 17 mm HI 143 Food Catering and Manufacturing temperature

12 Plug and play datalogging HI 141 Series temperature Food Catering and Manufacturing Range of LCD display equipped dataloggers recording up to 16,000 measurements Now featuring a new interchangeable Lumberg plug probe, the HI 141 series of Hanna dataloggers is more flexible than ever. The quick plug and play feature combined with the instrument s continuous temperature readout opens up huge possibilities for this series of meters. Operators can take a variety of checks in different locations and in quick succession by simply switching probes. Designed to support best budgetary practice, one meter can be used with several different probes. This allows the instrument to be used for varying applications by simply exchanging the probe and selecting an appropriate alternative. Ideal for Chilled food distribution Fridge and freezer monitoring Grain storage Dual level LCD with capacity to display the following information Number of samples taken Countdown to start of logging High and low alarm points temperature temperature Plug and play Full set of information and readings constantly on display Tamper proof data collection Store min/max temperature between logging intervals Use as a thermometer Number of samples which have exceeded High/Low alarms Store up to 16,000 temperature samples in protected nonvolatile EEPROM memory Temp range: -40 to +125 Min/Max temperature values White, waterproof casing is easy to clean Select log interval: from 1 second to 1 per 24 hours Logging delay - up to 199 hours in advance Tamper proof data collection system with details stored in serial numbered lots High and Low alarm points

13 temperature temperature One small meter... six BIG benefits Plug and play datalogging HI 141 Series Use with any Hanna Lumberg probe Test for calibration with certified Hanna test plugs Use as a hand-held thermometer with a standard hand-held probe for on the spot checks Fit a speciality probe for remote monitoring Operate with bespoke probes to suit specific applications Choice of 2 models: 1 external sensor 1 internal & 1 external sensor Test on the spot By using a certifi ed Hanna calibration test plug, the datalogger can be checked for accuracy in a matter of moments a boon for operators and companies alike. Simply plug in the calibration test plug in place of a probe See the desired value on the LCD display Save time and money with on the spot calibration which avoids the need to return the meter to the calibration laboratory Available as optional extra HI windows application software HI infrared transmitter Supplied with 3.6v lithium AA battery Magnetic key Instructions choice of temperature probes available for this meter Specifications Product Code HI 141DH/LUM HI 141GH/LUM Sensor(s) 1 External 1 Internal 1 External Range to to to Resolution 0.1 C / 0.1 F Accuracy +/-0.5 C (-40.0 to 0.0 and 70.0 to C); +/-0.4 C (0.0 to 70.0 C); +/-1.0 C (>100.0 C) Environment RH 100% Dimensions 86.5mm diameter x 35mm height Weight 150 grams Food Catering and Manufacturing temperature

14 Probes temperature temperature temperature temperature Food Catering and Manufacturing Hanna offers a wide range of temperature probes to suit specific applications Our most popular formats are listed here with details on their use and applications. Bespoke orders We also manufacture temperature probes to meet bespoke requirements. If you cannot see what you require here in our catalogue and need something shorter, thinner, longer or more fl exible give us a call. We will be happy to make it for you. Contact us for details on the Hanna Calibration Lab A choice of electrodes For use with Ref no Ideal for Probe details HI & HI 141 datalogger For use with HI General purpose All-purpose food penetration probe HI 762PW/LUM HI 765PW 2 Fish fi lleting General purpose for food with stainless steel braided knife proof cable HI 762PW/LUM/ST HI 765PW/ST 3 Fast response in air Drilled tip for fast response in air HI 762A/LUM HI 765A Between pack for sandwiches and packed goods Ovens, hotplates & food warmers Air monitoring in chill cabinets & freezers Chilled display cabinets 1 To select the option that is right for your application, reference the numbered illustration above with the detailed checklist below. Flexible probe designed for between pack temperature testing HI 762BP/G/LUM HI765BP/G Flexible minimum diameter heat resistant PTFE wire probe HI 762W/T/LUM HI 765W/T Flexible minimum diameter tip wire probe HI 762W/LUM HI 765W Leave alone food simulant a solid block sensor which responds to temperature changes in the same way as food HI 762FS/LUM HI 765FS

15 temperature temperature 6 Accessories temperature 5 A choice of accessories Reference the numbered illustrations above with our detailed checklist below to select the accessories you need for your meter. Ref no Accessories 1 0 C test key 2-18 C test key 3 Ref no C test key Details 2 4 Allows the user to check the thermometer is accurate at zero degrees Celsius - 0 C Allows the user to check the thermometer is accurate a frozen food temperatures of - 18 C Allows the user to check the thermometer is accurate at hot food temperatures of +70 C 3 7 Hanna offers a variety of accessories to support the rigorous temperature testing schedules required for food manufacture and preparation. Test keys to check temperature accuracy together with regular calibration certifi cation are available to help you ensure your meters are in optimum working order and can deliver the levels of precision required. Food probe wipes to clean and sterilise your probes support the high standards of health and hygiene required for all food applications. Neoprene rubber holsters offer thermometers protection against accidental damage and knocks. The Hanna Food Log Book supports rigorous temperature testing schedules. Diary pages are laid out to help operators maintain regular checks and keep full temperature monitoring records. The Hanna Calibration Laboratory is fully UKAS accredited and can carry out full UKAS calibration on your thermometers and probes. For use with HI & HI 141 For use with HI 9241 HI /LUM HI HI /LUM HI HI /LUM HI Accessories Details For general food thermometer use Blue food probe wipes in resealable tub Neoprene rubber holster UKAS Calibration Certifi cate Food Log Book Required to regularly clean and sterilise temperature probes for optimum health and hygiene standards Fits around the thermometer to offer protection against accidental damage and drops UKAS calibration certifi cate from the Hanna Calibration Lab to certify accuracy of thermometer and probe at 0 C and +70 C Food diary designed to help operators keep full temperature monitoring records and meet latest food legislation. HI HI (orange) HI (blue) CERT-UKAS FOODLOGBOOK Food Catering and Manufacturing temperature

16 Four ways to do business with HANNA Visit Phone Contact your local sales distributor HannaNorden AB Energigatan 15 B KUNGSBACKA Sverige / Sweden