Modular Washroom Fittings for Education

Transcription

1 Modular Washroom Fittings for Education

2 ONVO THE NEW NAME IN SCHOOL WASHROOMS. ONVO originated from many years assisting architects with the design of school washrooms at Lovair. We recognised that we could be part of enhancing children s experience at school and have a positive impact on the quality of their education. Lovair separated their education sector as a new company as of January 2018 to create greater clarity of focus and provide customer experience tailored to this sector. The Lovair Latherwash trough has been known and trusted by both architects and contractors for almost a decade because of its high quality and ease of installation. ONVO are committed to supplying only the highest quality products, backed up by a consistent, honest service by always keeping our promises. We hope this brochure is useful when specifying and we trust the case studies are inspirational. School washrooms are our genuine passion and we would be delighted to discuss any ideas or challenges you may have. Please call us on or us at. CONTENTS Latherwash 2W Latherwash 2D Latherwash 2D with Modular Frame Latherwash 2N Curvewash 2W Curvewash 2D 180 Sensor Tap 140 Sensor Tap 480 Soap Dispenser Soap Systems 766 Soap Dispenser Soap Systems V22 Soap Dispenser 787 Toilet Roll Holder 89 Hand Dryer 735 Paper Towel Dispenser Wash Fountains

3 4 / 5 LATHERWASH 2W Archbishop McGrath Bridgend Dreghorn Primary School North Ayrshire 200 Length 500 The ONVO Latherwash 2W is ideal for educational facilities where the wall build up can be designed to accommodate a 150mm void behind the trough. This is the slimmest trough in the ONVO range at only 307mm deep, with all the pipework and wires concealed in the void behind. No boxing in underneath is required, lending itself to a minimalistic floating effect. Bracket Positions Code Length* Users Brackets Weight W mm Kg 1202W 1200mm Kg 1802W 1800mm Kg 2402W 2400mm Kg 2W 0mm Kg 150mm Minimum Cavity 307 Installation Heights: *Bespoke lengths also available if required Whatriggs Primary School East Ayrshire 90 Junior KS3 KS4 700mm 800mm 850mm Installtion Height Fixing Locations 180 Sensor Tap Page Soap Dispenser Page 17

4 6 / 7 LATHERWASH 2D St Luke s Primary School Manchester The Deans Primary School Manchester Length 380 The ONVO Latherwash 2D is perfect for installing directly onto a solid wall. The taps are mounted onto the deck of the trough and therefore no void is required behind. The Latherwash 2D is very slim, only projecting 400mm from the wall and can be used with the complimentary ONVO Modular Frame System to conceal the pipework and wires underneath, see page 9. Bracket Positions 78 Code Length* Users Brackets Weight D mm Kg 1202D 1200mm Kg 1802D 1800mm Kg 2402D 2400mm Kg 2D 0mm Kg 400 Installation Heights: *Bespoke lengths also available if required Lagerkvists Skola Junior KS3 KS4 700mm 800mm 850mm Installtion Height For installation heights lower than 700mm, please refer to page 11. Fixing Locations 140 Sensor Tap Page Soap Dispenser Page 19

5 8 / 9 LATHERWASH 2D WITH MODULAR FRAME The ONVO Latherwash 2D with Modular Frame is designed for installations where the pipework below the trough needs to be concealed or where the trough cannot be cantilevered off the wall. The taps are mounted onto the deck of the trough and therefore no void is required behind. The Latherwash 2D with Modular Frame is very slim, only projecting 400mm from the wall Code Length* Users D/MF mm D/MF 1200mm D/MF 1800mm D/MF 2400mm 4 2D/MF 0mm 5 *Bespoke lengths also available if required 38 Heath Park Wolverhampton Installation Heights: Junior KS3 KS4 700mm 800mm 850mm For installation heights lower than 700mm, please refer to page Sensor Tap Page Soap Dispenser Page 19

6 10 / 11 LATHERWASH 2N Maidens Nursery South Ayrshire 400 Length The ONVO Latherwash 2N is designed for situations where there is no wall void and can be installed as low as 500mm from the floor to the trough rim! This trough always comes with the ONVO Modular Frame System and even when installed as low as 500mm, there is still mm underneath for access. This ability to be installed at low height combined with the slimness of the trough, means the sensor taps are easy to use for children as young as 2 years. Annbank Primary School South Ayrshire Code Length* Users 602N mm N 1200mm N 1800mm N 2400mm 4 2N 0mm 5 Installation Heights: *Bespoke lengths also available if required Early Years 500mm Infants mm For installation heights higher than mm, please refer to page Sensor Tap Page Soap Dispenser Page 19

7 CURVEWASH 2W 12 / 13 CURVEWASH 2D The ONVO Curvewash 2W does not have a removable front panel and can therefore be installed as low as 500mm to the trough rim. This trough requires an accessible 150mm void behind to accommodate for pipework and wires. Length Length The ONVO Curvewash 2D does not have a removable front panel. We recommend this product for installations above 700mm to allow room for access underneath. The Curvewash 2D can be installed directly onto a solid wall projecting only 422mm. This trough can be used with the complimentary ONVO Modular Frame System to conceal the pipework and wires underneath, see page 9. Code Length* Users Brackets Weight 60CW mm Kg 12CW 1200mm Kg 18CW 1800mm Kg 24CW 2400mm Kg 30CW 0mm Kg *Bespoke lengths also available if required Length 312 Length Code Length* Users Brackets Weight 60CD mm Kg 12CD 1200mm Kg 18CD 1800mm Kg 24CD 2400mm Kg 30CD 0mm Kg 150mm Minimum Cavity 12 Installation Heights: Installation Heights: *Bespoke lengths also available if required Early Years 500mm Infants mm KS3 KS4 800mm 850mm Guide Heights 422 Guide Heights 180 Sensor Tap Page Soap Dispenser Page Sensor Tap Page Soap Dispenser Page 19 Fixing Locations Fixing Locations

8 14 / SENSOR TAP Whatriggs Primary School East Ayrshire The ONVO 180 sensor tap is to the used with the Latherwash 2W Washtrough. At 170mm long, the water hits the centre of the trough eliminating any splashing. Its minimalistic design and robustness makes it ideal for schools. A minimum 150mm void is required behind the tap for the flexi hose and wires. Min void 150mm 12mm min 33mm max mm Code Power supply Length Weight Finish 181C Battery 170mm 1.16Kg Chrome 182C Mains 170mm 1.16Kg Chrome 15 Dreghorn Primary School North Ayrshire Latherwash 2W page Soap Dispenser page SENSOR TAP The ONVO 140 sensor tap is designed to sit on the deck of the Latherwash 2D Washtrough. This is the most robust tap in the ONVO range and with the flexi hose and wires all below, can be installed in situations where a wall void is not achievable. Annbank Primary School South Ayrshire Code Power supply Length Weight Finish 12mm min 28mm max C Battery 115mm 1.06Kg Chrome 142C Mains 115mm 1.06Kg Chrome 28 Latherwash 2D page Soap Dispenser page 19

9 16 / SOAP DISPENSER The ONVO 480 soap dispenser is push operated and designed to complement the 180 sensor tap. The dispenser can be fed via a single or multi-feed system as detailed below. The soap container needs to be situated below the dispenser within a two-meter range. We recommend this being in the void behind the washtrough with easy accessibility. Min void 150mm 12mm min 50mm max 94 Code Length Weight Finish C 120mm 0.5Kg Chrome Latherwash 2W page Sensor Tap page 15 SOAP SYSTEMS The ONVO soap system can feed up to four dispensers from one central 5L container. The soap container must be situated underneath the dispenser within two meters and easily accessible. Code Size Feeds FB1 1 litre 1 *Not compatible with 480 series ST1 5 litre 1 ST2 5 litre 2 ST3 5 litre 3 ST4 5 litre 4

10 CASE STUDIES 766 SOAP DISPENSER 18 / 19 The ONVO 766 soap dispenser is push operated and complements the 140 sensor tap. Single and multi -feed options are available as detailed below. The soap container must be situated underneath the washtrough within two meters of the dispenser and easily accessible. Our solution for this is the ONVO Modular Frame system on Page mm min 55mm max 84 Code Length Weight Finish 766C 114mm 0.78Kg Chrome 68 8 page 7 page 15 Latherwash 2D 140 Sensor Tap 21 SOAP SYSTEMS The ONVO soap system can feed up to four dispensers from one central 5L container. The soap container must be situated underneath the dispenser within two meters and easily accessible. Code Size Feeds FB1 ST1 ST2 ST3 ST *Not compatible with 480 series litre litre litre litre litre

11 20 / 21 V22 SOAP DISPENSER The ONVO V22 is a push operated soap dispenser for a standard wall mounted installation. This unit can be installed either above the Washtrough or on the wall anywhere in the washroom Code Capacity Weight Finish V22C 1000ml 1.22Kg Chrome V22CS 1000ml 1.22Kg Satin TOILET ROLL HOLDER The ONVO 787 is a lockable stainless-steel Jumbo toilet roll holder. Easy to install and robust Code Capacity Weight Finish C 1 Roll 1.66Kg Chrome 787CS 1 Roll 1.66Kg Satin

12 22 / HAND DRYER The Air Fury is well known in the market for its high speed, energy efficient hand drying. The Air Fury is very compact and robust and has the unique feature of noise adjustability Code Voltage Frequency Amps Finish 89W V 50Hz 8A White 89C V 50Hz 8A Chrome 89CS V 50Hz 8A Satin 735 PAPER TOWEL DISPENSER The ONVO 735 is our solution if paper towels are to be used instead of hand dryers. Lockable, robust and manufactured from stainless-steel, it is the ideal product for schools Key location Code Capacity Weight Finish 735C 400- Paper Towels 2.04Kg Chrome 735CS 400- Paper Towels 2.04Kg Satin 375

13 6 USER WASH FOUNTAIN 24 / 25 8 USER WASH FOUNTAIN The ONVO Washfountains are designed for secondary schools and particularly open plan washrooms. Washfountains are very robust and ideal for areas with limited wall space. They come with a built in and easily replenished soap dispenser system. Top ø930 Removable lid Soap refill cap Top ø1355 Removable lid Soap refill cap The ONVO Washfountains are designed for secondary schools and particularly open plan washrooms. Washfountains are very robust and ideal for areas with limited wall space. They come with a built in and easily replenished soap dispenser system. 420 Code Operation 420 Code Operation 55CS 56CS Push Sensor Sensor tap Manual soap dispenser Manual tap Manual soap dispenser 97CS 98CS Push Sensor Access door 1/2 BSP Hot and cold water, 2x40mm straight waster and electricity points from below Access door /2 BSP Hot and cold water, 2x40mm straight waster and electricity points from below Fixed to the floor 89 Hand Dryer Page Paper Towel Dispenser Page 23 Fixed to the floor 89 Hand Dryer Page Paper Towel Dispenser Page 23

14 Astro House 12F Adlington Business Park London South Road Cheshire SK10 4PZ United Kingdom LinkedIn: Search ONVO Modular

15 Astro House 12F Adlington Business Park London South Road SK10 4PZ Cheshire United Kingdom LinkedIn: Search ONVO Modular