PAB SERIES 3thru6-1/3Ton. Belt Drive 10 SEER CONVERTIBLE SINGLE PACKAGE AIR CONDITIONING UNIT /01

Transcription

1 PAB SERIES 3thru6-1/3Ton Belt Drive CONVERTIBLE SINGLE PACKAGE AIR CONDITIONING UNIT 10 SEER SINGLE PACKAGE Electric cooling, self contained for year-round comfort. Systems can be installed on roof top or ground level with the new convertible design. 6-1 / 3 Ton unit has two -stage cooling. CABINET Triple -coated steel, consisting of a Polyester top coat, a urethane primer coat preceded by an oxide pretreatment. Access panels for easy service. Side by side supply and return. Heavy gauge base with rails. INTEGRAL BASE RAILS Fork-lift access on three sides. Holes provided for lifting lugs makes rooftop installation easier. IMPROVED INSULATION Dual density insulation improves temperature separation. INDOOR BLOWER Belt drive blower to meet a wide range of applications. No Difference Design - Unit will operate at the same rated External Static Pressure in the down shot or horizontal duct position. INTERNAL AIR FILTERS Easy access air filters to maintain a clean evaporator coil. COPPER TUBE/ALUMINUM FIN COILS Enhanced aluminum fins mechanically bonded to 3/8 copper tubes for improved heat transfer. FILTER DRIERS To insure refrigerant cleanliness. COMPRESSORS Scroll compressors on 4 and 5 ton models, Recip compressor on 3 and 6-1/3 ton models. HIGH & LOW PRESSURE SWITCHES To provide excellent compressor protection. FREEZE THERMOSTAT Mounted to evaporator, prevents coil freeze up. EXTERNALLY-MOUNTED GAUGE PORTS Allows for more accurate reading of operating conditions while servicing. PRE-WIRED FOR ECONOMIZER Designed for slide in, plug in economizer installation. ELECTRIC HEAT ACCESSORY 5 thru 30 65VA TRANSFORMER Standard 65 VA transformer has built -in secondary circuit breaker standard on all models. C RESIDENTIAL AND COMMERCIAL SYSTEMS SPLIT SYSTEMS PACKAGED AIR CONDITIONERS COMBINATION GAS / ELECTRIC UNITS HEAT PUMPS AIR HANDLERS MANUFACTURED HOME AIR CONDITIONERS GAS, OIL AND ELECTRIC FURNACES International Comfort Products 650 Heil--Quaker Avenue, Lewisburg, TN /01

2 UNIT SPECIFICATIONS Electrical Data Electrical Data Condenser Data Coil Fan Motor Fan Total Face MODEL Voltage HACR Max. Area Sq. Feet Fins Per Tube Diameter Horsepower / Full Load RPM Size Diameter Degree CFM Phase - Hz Fuse Ampacity (Sq. Meters) In./Rows In.(mm.) Amps Amps (Max.) In.(mm) Pitch (Max.) PAB036N2H 208/ /8.75 / PAB036N2L (1.16) 20 / 1 (9.52).75 / (558.8) PAB036N2S / PAB048N2H 208/ /8.75 / PAB048N2L (1.6) 20 / 1 (9.52).75 / (558.8) PAB048N2S / PAB060N2H 208/ /8.75 / PAB060N2L (1.6) 20 / 1 (9.52).75 / (558.8) PAB060N2S / PAB075N2H 208/ /8.75 / PAB075N2L (1.6) 20 / 2 (9.52).75 / ) PAB075N2S / NOTES: PAB075 models have two compressors with 2 individual circuits. (Two -Stage Cooling). MODEL PAB036N2H PAB036N2L Total Face Area Sq. Feet (Sq. Meters) Evaporator Coil Coil Motor Blower Compressor Fins Per In./Rows Tube Diameter In.(mm) Blower H.P. - Speeds Full Load Amps Rated Load Amps Locked Rotor Amps RPM Type & Size RPM (Max) CFM Rated 5.4 / / BD Factory Refrigerant Charge R-22 Oz.(Ltr) Sound Rating (Bels) Ship. Weight Lbs.(Kg) 590(267.6) 8.2 3/ / (267.6) (.76) (9.52) (3.07) PAB036N2S 590(267.6) PAB048N2H 8.2 3/8 5.4 / (281.2) PAB048N2L (.76) 15 / 2 (9.52) 3/ BD (3.72) (281.2) PAB048N2S (281.2) PAB060N2H 8.2 3/ / (290.3) PAB060N2L (.76) 14 / 3 (9.52) BD (3.81) (290.3) PAB060N2S (290.3) PAB075N2H 8.2 3/ ea 75 ea 735(334.0) PAB075N2L (.76) 14 / 4 (9.52) BD11-11A Ea 37 Ea 128/ (334.0) PAB075N2S Ea 31 Ea (3.78/3.78) 735(334.0) PERFORMANCE DATA: COOLING Rated Capacity BTUH** Power Input Watts Evaporator Rated Airflow (SCFM) MODEL S/T Ratio S.E.E.R. E.E.R. PAB036 34, PAB048 45, PAB060 58, PAB075 74, NOTES: PAB075 models have two compressors with 2 individual circuits. (Two -Stage Cooling), IPLV ** Rated ARI Standards 95 Amb, 80 DB,/67 WB, 230 Volts. For applications at 208 volts deduct 1000 BTU. MODEL IDENTIFICATION GUIDE MODEL P A B 036 N 2 H Electrical Characteristics Product Family H = 208 / L = P = Single Package S = Fuel Type A = Air Conditioner Design Series B = Architectural Stone Color, HSP Ignition System Capacity (Nominal BTU) 036 = 3 Ton 060 = 5 Ton 048 = 4 Ton 075 = 6-1/3 Ton Blower Options 1 = Standard Direct Drive Electric Heat Accessory Available 2 = Standard Belt Drive 2

3 ELECTRICAL DATA - ELECTRIC HEAT ACCESSORY Heater Model # AEB010CHA AEB015CHA AEB020CHA AEB025CHA AEB030CHA Use With 3to6--1/3 Ton 3 to 6--1/3 Ton 3to6--1/3Ton 4to /3 Ton 4to /3 Ton Supply 1 st /2 nd Supply Minimum Max. Fuse Nominal Heater or Voltage Btu/h Stage kw Circuit Circuit Amps (Volts - Phase - Hz) Rating Number Ampacity NEC HACR Breaker (Amps) , L4--L5--L , L4--L5--L , L4--L5--L , L4--L5--L , / 20.0 L4--L5--L L7--L8--L , L4--L5--L L7--L8--L , / 25.0 L4--L5--L L7--L8--L , / 18.8 L4--L5--L L7--L8--L , / 30.0 L4--L5--L L7--L8--L , / L4--L5--L L7--L8--L AEB010CLA 3to6--1/3Ton , L4--L5--L AEB015CLA 3to6--1/3Ton , L4--L5--L AEB020CLA 3to6--1/3 Ton , / 20.0 L4--L5--L L7--L8--L AEB025CLA 4to6--1/3 Ton , / 25.0 L4--L5--L L7--L8--L AEB030CLA 4to6--1/3 Ton , / 30.0 L4--L5--L L7--L8--L AEB010CSA 3to6--1/3Ton , L4--L5--L AEB015CSA AEB020CSA AEB025CSA AEB030CSA 3to6--1/3Ton , L4--L5--L to 6--1/3 Ton , / to 6--1/3 Ton , / to 6--1/3 Ton , / 30.0 L4--L5--L6 L7--L8--L9 L4--L5--L6 L7--L8--L9 L4--L5--L6 L7--L8--L

4 EXPANDED PERFORMANCE DATA (COOLING) - 3 Ton (Gross Capacity) 208 VOLT Airflow IDB* CFM Airflow IDB* CFM S/T 1200 S/T 1056 S/T 1344 S/T 1200 S/T 1056 S/T 1344 S/T 1200 S/T 1056 S/T 1344 S/T 1200 S/T 1056 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb EXPANDED PERFORMANCE DATA (COOLING) S/T 1200 S/T 1056 S/T 1344 S/T 1200 S/T 1056 S/T 1344 S/T 1200 S/T 1056 S/T 1344 S/T 1200 S/T 1056 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb * Entering Indoor Temperature - Degrees F. Dry Bulb Standard Rating 3 Ton (Gross Capacity) 230, 460, 575 VOLT 4

5 EXPANDED PERFORMANCE DATA (COOLING) - 4 Ton (Gross Capacity) 208 VOLT Airflow IDB* CFM Airflow IDB* CFM S/T 1600 S/T 1408 S/T 1792 S/T 1600 S/T 1408 S/T 1792 S/T 1600 S/T 1408 S/T 1792 S/T 1600 S/T 1408 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb EXPANDED PERFORMANCE DATA (COOLING) S/T 1600 S/T 1408 S/T 1792 S/T 1600 S/T 1408 S/T 1792 S/T 1600 S/T 1408 S/T 1792 S/T 1600 S/T 1408 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb * Entering Indoor Temperature - Degrees F. Dry Bulb Standard Rating 4 Ton (Gross Capacity) 230, 460, 575 VOLT 5

6 EXPANDED PERFORMANCE DATA (COOLING) - 5 Ton (Gross Capacity) 208 VOLT Airflow IDB* CFM Airflow IDB* CFM S/T 2000 S/T 1760 S/T 2240 S/T 2000 S/T 1760 S/T 2240 S/T 2000 S/T 1760 S/T 2240 S/T 2000 S/T 1760 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb EXPANDED PERFORMANCE DATA (COOLING) S/T 2000 S/T 1760 S/T 2240 S/T 2000 S/T 1760 S/T 2240 S/T 2000 S/T 1760 S/T 2240 S/T 2000 S/T 1760 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb * Entering Indoor Temperature - Degrees F. Dry Bulb Standard Rating 5 Ton (Gross Capacity) 230, 460, 575 VOLT 6

7 EXPANDED PERFORMANCE DATA (COOLING) - 6 1/3 Ton (STAGE 1) (Gross Capacity) Airflow IDB* CFM Airflow IDB* CFM S/T 2500 S/T 2200 S/T 2800 S/T 2500 S/T 2200 S/T 2800 S/T 2500 S/T 2200 S/T 2800 S/T 2500 S/T 2200 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb EXPANDED PERFORMANCE DATA (COOLING) S/T 2500 S/T 2200 S/T 2800 S/T 2500 S/T 2200 S/T 2800 S/T 2500 S/T 2200 S/T 2800 S/T 2500 S/T 2200 S/T Outdoor Ambient Temperature - Degrees F. Dry Bulb Entering Indoor Temperature - Degrees F. Wet Bulb * Entering Indoor Temperature - Degrees F. Dry Bulb Standard Rating 6 1/3 Ton (STAGE 2) (Gross Capacity) 7

8 BELT DRIVE BLOWER PERFORMANCE DATA - 3 TON UNITS VOLTS EXTERNAL STATIC PRESSURE (INCHES W.C.) Standard Cooling Operation Range CFM MOTOR WATTS NOTES: 1)Maximum motor Watts is 787 Watts. 2) Maximum blower speed is 1400 RPM. 3) Contact factory for applications requiring operation outside standard cooling operating range. 4)Airflow data isbased on drycoilwith filters. 5) Pulleyturnsrefersto turnsout. In other words,0 turnsisanarrower sheavethan 5turns. 6)Blowerspeed MUSTbe setto givethe correct air temperature rise through the unit as marked on the Rating Plate. EXTERNAL STATIC PRESSURE IN INCHES WATER COLUMN OF TURNS CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM PULLEY TURNS OPEN RPM WITH.75 HP FACTORY SETTING TURNS OPEN.75 HP 5 8

9 BELT DRIVE BLOWER PERFORMANCE DATA - 3 TON UNITS - 230, 460, 575 VOLTS EXTERNAL STATIC PRESSURE (INCHES W.C.) Standard Cooling Operation Range CFM MOTOR WATTS NOTES: 1)Maximum motor Watts is 808 Watts. 2) Maximum blower speed is 1400 RPM. 3) Contact factory for applications requiring operation outside standard cooling operating range. 4)Airflow data isbased on drycoilwith filters. 5) Pulleyturnsrefersto turnsout. In other words,0 turnsisanarrower sheavethan 5turns. 6)Blowerspeed MUSTbe setto givethe correct air temperature rise through the unit as marked on the Rating Plate. EXTERNAL STATIC PRESSURE IN INCHES WATER COLUMN OF TURNS CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM PULLEY TURNS OPEN RPM WITH.75 HP FACTORY SETTING TURNS OPEN.75 HP 5 9

10 BELT DRIVE BLOWER PERFORMANCE DATA - 4 TON UNITS VOLTS EXTERNAL STATIC PRESSURE (INCHES W.C.) E.S.P. VS. 0 TURNS 1 TURN 2 TURNS 3 TURNS 4 TURNS 5 TURNS Standard Cooling Operating Range WATTS VS. 0 TURNS 1 TURN 2 TURNS 3 TURNS 4 TURNS 5 TURNS CFM MOTOR WATTS NOTES: 1)Maximum motor Watts is 928 Watts. 2) Maximum blower speed is 1400 RPM. 3) Contact factory for applications requiring operation outside standard cooling operating range. 4)Airflow data isbased on drycoilwith filters. 5) Pulleyturnsrefersto turnsout. In other words,0 turnsisanarrower sheavethan 5turns. 6)Blowerspeed MUSTbe setto givethe correct air temperature rise through the unit as marked on the Rating Plate. EXTERNAL STATIC PRESSURE IN INCHES WATER COLUMN OF TURNS CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM PULLEY TURNS OPEN RPM WITH.75 HP FACTORY SETTING TURNS OPEN.75 HP (PGMG48H135) 2 10

11 BELT DRIVE BLOWER PERFORMANCE DATA - 4 TON UNITS - 230, 460, 575 VOLTS EXTERNAL STATIC PRESSURE (INCHES W.C.) E.S.P. VS. 0 TURNS 1 TURN 2 TURNS 3 TURNS 4 TURNS 5 TURNS Standard Cooling Operating Range WATTS VS. 0 TURNS 1 TURN 2 TURNS 3 TURNS 4 TURNS 5 TURNS CFM MOTOR WATTS NOTES: 1)Maximum motor Watts is 962 Watts. 2) Maximum blower speed is 1400 RPM. 3) Contact factory for applications requiring operation outside standard cooling operating range. 4)Airflow data isbased on drycoilwith filters. 5) Pulleyturnsrefersto turnsout. In other words,0 turnsisanarrower sheavethan 5turns. 6)Blowerspeed MUSTbe setto givethe correct air temperature rise through the unit as marked on the Rating Plate. EXTERNAL STATIC PRESSURE IN INCHES WATER COLUMN OF TURNS CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM PULLEY TURNS OPEN RPM WITH.75 HP FACTORY SETTING TURNS OPEN.75 HP (PGMG48H/F135) 2 11

12 BELT DRIVE BLOWER PERFORMANCE DATA - 5 TON UNITS VOLTS EXTERNAL STATIC PRESSURE (INCHES W.C.) TURNS 3 TURNS 4 TURNS 5 TURNS 1 TURN Standard Cooling Operating Range 1 TURN WATTS VS. 0 TURNS 5 TURNS 4 TURNS 2 TURNS 3 TURNS E.S.P. VS. 0 TURNS CFM MOTOR WATTS NOTES: 1)Maximum motor Watts is 1486 Watts. 2) Maximum blower speed is 1400 RPM. 3) Contact factory for applications requiring operation outside standard cooling operating range. 4)Airflow data isbased on drycoilwith filters. 5) Pulleyturnsrefersto turnsout. In other words,0 turnsisanarrower sheavethan 5turns. 6)Blowerspeed MUSTbe setto givethe correct air temperature rise through the unit as marked on the Rating Plate. EXTERNAL STATIC PRESSURE IN INCHES WATER COLUMN OF TURNS CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM PULLEY TURNS OPEN RPM WITH 1 HP FACTORY SETTING TURNS OPEN 1HP

13 BELT DRIVE BLOWER PERFORMANCE DATA - 5 TON UNITS - 230, 460, 575 VOLTS EXTERNAL STATIC PRESSURE (INCHES W.C.) TURNS 4 TURNS 5 TURNS 2 TURNS 1 TURN Standard Cooling Operating Range E.S.P. VS. 0 TURNS 5 TURNS 3 TURNS 1 TURN WATTS VS. 0 TURNS 4 TURNS 2 TURNS CFM MOTOR WATTS NOTES: 1)Maximum motor Watts is 1454 Watts. 2) Maximum blower speed is 1400 RPM. 3) Contact factory for applications requiring operation outside standard cooling operating range. 4)Airflow data isbased on drycoilwith filters. 5) Pulleyturnsrefersto turnsout. In other words,0 turnsisanarrower sheavethan 5turns. 6)Blowerspeed MUSTbe setto givethe correct air temperature rise through the unit as marked on the Rating Plate. EXTERNAL STATIC PRESSURE IN INCHES WATER COLUMN OF TURNS CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM CFM WATTS RPM PULLEY TURNS OPEN RPM WITH 1 HP FACTORY SETTING TURNS OPEN 1HP