F-series. Loggers. I 225F Crank & Tele Logger I 225FHP Crank & Tele Logger
|
|
- Todd Boyd
- 5 years ago
- Views:
Transcription
1 F-series Loggers I 225F Crank & Tele Logger I 225FHP Crank & Tele Logger 1
2 Evolutionary Design Bell Loggers are derived from the successful Bell Cane Loaders and to this day remain the lowest cost solution to sorting, loading and moving both sugar cane and timber. The Logger s simple design belies the brilliance of the concept and design. Irvine Bell developed the concept in the early 60s with the intention of designing a machine that would duplicate the essence of a person walking up to a pile and picking it up. He succeeded in blurring the interface between man and machine. While the concept has remained the same, the product has undergone a number of subtle but important improvements over the years. These improvements have evolved the Bell Logger into a product where beauty is way more than skin deep. More importantly, the design team associated with the Logger has gained invaluable insights and experience throughout the 50 year journey and they appreciate the understatedness of this simple design. They understand that in order to achieve simplicity in design an enormous amount of effort and mastery is required. Copying is said to be the highest form of flattery, however, many attempts to copy the Bell Tri-Wheeler have failed. Perhaps it has something to do with failing to understand the soul of this machine? Bell Equipment has built a solid reputation with this simple machine along with a foundational concept of building STRONG RELIABLE MACHINES and ensuring that this philosophy is reinforced by providing our customers with STRONG RELIABLE SUPPORT, once the sale is done. 2
3 Engine Careful selection based on the rugged environment and operating conditions. Low fuel burn and low running costs reinforce the focus on lowest cost per ton operations. Water cooled engine provides low noise cool running operation. Transmission Pump Robust components, chosen with the customer in mind, are tested extensively to protect the customer from unwanted downtime. Evolution - new developments which enhances productivity, are continuously embraced. New developments have provided continuous opportunities to enhance operator productivity and safety. Wheel motors Well proven design combines selected hydraulic motors and braking system coupled to a Bell final drive. Fail to safe, spring applied hydraulically released SAHR brakes. Frame Triangulation forms the basis of the frame structure, to distribute force evenly for durability. Ingenuity of design simply integrates the hydraulic tank into the frame of the F-series Loggers. Layered sophistication allows the product to be built for the application. Design Philosophy Customer input. Simple, strong, reliable and efficient machines. Lowest cost per tonne solutions. 3
4 Specifications - 225F Crank Logger OPTIONS: l STANDARD s OPTION ENGINE & ANCILLARIES HYDRAULIC SYSTEM ELECTRICAL OPTIONS Yanmar TNV98 Configuration 4 cylinder Aspiration Naturally aspirated Emission Level Tier II Governed Power 45 kw Governed Speed rpm Displacement cc Fuel Filter Type In-line water separator with separate spin on fuel filter. Fuel Filter 5 μm Coolant Capacity (Engine only) 4 litres Radiator Easy access and easy to clean. Agricultural spec fine dust tolerant - wide fin spacing. Fuel Tank Secure, lockable ground level filling. Integrated into lower section of the frame to keep a low centre of gravity. Fuel Tank Capacity 100 litres Air Cleaner Type Cyclonic pre-cleaner continuously vacuum scavenged through the exhaust. Primary filter with second safety filter with dash mounted restriction indicator. Twice the dust holding capacity of conventional air cleaners. OPERATING WEIGHTS Unladen Front kg Unladen Rear kg Unladen Total kg Safe Working Load kg Tipping Load kg Hydrostatic Drive System Servo controlled Variable displacement Wheel Drive System Robust, proven Bell planetary hub driven by high displacement radial piston motor with fail to safe spring applied hydraulically released multidisc wet brake. Wheel Drive Make & Model Bell #29P Service Brake Hydrostatic braking through the Maximum Flow at Engine Rated Speed 60.9 l/min 241 bar Boom lift & lower Maximum Flow at Engine Rated Speed 39.4 l/min 280 bar Maximum Continuous Pressure 250 bar Attachment - Grapple Open/Close, Tele Ext in/out and Rotator Tank Integrated within the tubular frame Tank Capacity 140 litres Tank Breather Remote to filler cap, 3 micron rating, 0.75 bar pressure Hydraulic Cooler Air Fin Spacing Easy to clean wide fin spacing System 12 volt system with a single maintenance free battery mounted in the rear of the machine above the tail wheel. Alternator Output 12v 80 Amp Starter Motor Rating 12v 3.0 kw Fuse Box Blade fuses located inside the cabin in the instrumentation box Battery Maintenance free gel filled battery 100 Amp Hour rating Battery Isolator Single pole type with lock out mounted onto the right hand side of the frame 8 lights in total. 4 facing forwards, 2 facing rearwards, 1 facing side ways on each side of the frame. Strobe Light Mounted on the rear of frame Interior lights LED mounted inside the cab and inside the engine bay. Warning Lights/Instrumentation Engine coolant temperature high Hydraulic oil temperature high Low fuel Battery charge Cold start Park brake active Reverse Camera Fleetm@tic Switches Ignition (key) Hour metre Park brake Horn Work lights Interior lights Cold start aid Windscreen wiper Window washer HVAC Battery isolator Sensors Low fuel level Door open proximity Seat belt proximity Engine coolant temp Hydraulic oil temperature Reverse proximity Front Wheelsets l 18.4x26 10Ply Logger s 18.4x26 10Ply Logger Dual Wheel s 18.4x30 10Ply Logger s 18.4x34 10Ply Forestry Special s 23.1x26 LS2 16Ply General s 23.1x26 LS2 16Ply Trelleborg T418 Rear Wheelsets l 400x Ply s 18.00x Ply Seat l Unsuspended Lap Belt s Unsuspended 4 Point Harness s Suspended Attachment l #35 with damped link s #35 with-out damped link s #43 with damped link s #43 with-out damped link l Halogen Lights s LED Lights (1800 Lum) s LED Lights (3500 Lum) Boom l Crank Boom s Tele Boom s Ext Tele Boom Language l English s French s Spanish Cab l Basic Option s Cab Doors (no glazing) with Cab Doors (no glazing in doors) s Full Deluxe - Cab doors, full glazing, HVAC, sound kit Counter Weight s 1 Weight l 4 Weights Miscellaneous s Reverse Camera s Rear View Side Mirrors (Note: not available if Log Rest Option is selected) s Door Proximity Switches s Fire Extinguisher s Fleetm@tic s Back up alarm s CE Exempt Note: Tyre sizes indicated represent available tyres at printing. Please ensure your choice is available at time of ordering. 4
5 Dimensions NOTE: All dimensions are Unladen values based on the Standard Wheelsets and Grab with Damper U.O.N Negative (-) dimension value denotes position below ground level or behind front of wheel, whichever is applicable. TRANSPORT POSITION OPERATING POSITION N B O L D Q K DF DC1 C E G I A M H J T S R MACHINE DIMENSIONS A Length-Transport Position with #35 Grab Closed mm A Length-Transport Position with #43 Grab Closed mm B Height-Transport Position with Grab closed mm C Front Axle Centre to Tailwheel Axle Centre mm C1 Front Axle Centre to Tailwheel Axle Centre mm D Ground Clearance-Front Axle Box mm E Front Tyre-Free Radius (Free Diameter) E (Std Wheelset) mm ( Ø 1615) E (Option 1) mm ( Ø 1458) E3 18.4/15-30 (Option 2) mm ( Ø 1549) E (Option 3) mm ( Ø 1675) E (Option 4-Dual Wheelset) mm ( Ø 1458) F Tailwheel-Free Radius (Free Diameter) F (Std Wheelset) mm ( Ø 864) F (Option 1) mm ( Ø 980) G Reach-Grab Ground Leve l - #35 Grab mm G Reach-Grab Ground Level - #43 Grab mm H Track Width-Front H (Std Wheelset) mm H (Option 1) mm H3 18.4/15-30 (Option 2) mm H (Option 3) mm H (Option 4-Dual Wheelset) mm I Inside Tyre Width-Front I (Std Wheelset) mm I (Option 1) mm I3 18.4/15-30 (Option 2) mm I (Option 3) mm I (Option 4-Dual Wheelset) mm J Width over Tyres-Front J (Std Wheelset) mm J (Option 1) mm J3 18.4/15-30 (Option 2) mm J (Option 3) mm J (Option 4-Dual Wheelset) mm K Tyre Width-Tailwheel K (Std Wheelset) mm K (Option 1) 450 mm L Load Over Height - #35 Grab mm L Load Over Height - #43 Grab mm M Grab Pivot Height-Boom Down Position mm N Reach-Grab Pivot-Boom Up Position...44 mm O Reach-Grab Pivot-Boom Down Position mm P Maximum Reach-Grab Pivot mm Q Height-Grab Maximum Reach mm R Grab Open - # mm R Grab Open - # mm S Maximum Reach-Below Ground - #35 Grab mm S Maximum Reach-Below Ground - #43 Grab mm T Front Axle Centre to Tailwheel Pivot Centre mm P Pre bunching pulp for grapple skidder. Short distance skidding of pulp or mining timber. Removal of timber from a skyline landing deck. Sorting and stacking pulp, mining and sawlogs on roadside or in mill yards. Roadside loading of pulp, mining and sawlogs onto transport vehicles. LOW capital outlay. LOW operating cost due to few working parts. LOW fuel consumption. SIMPLE to maintain. MULTI purpose unit. Highly MANOEUVRABLE. 5
6 Specifications - 225F Tele Logger OPTIONS: l STANDARD s OPTION ENGINE & ANCILLARIES HYDRAULIC SYSTEM ELECTRICAL OPTIONS Yanmar TNV98 Configuration 4 cylinder Aspiration Naturally aspirated Emission Level Tier II Governed Power 45 kw Governed Speed rpm Displacement cc Fuel Filter Type In-line water separator with separate spin on fuel filter. Fuel Filter 5 μm Coolant Capacity (Engine only) 4 litres Radiator Easy access and easy to clean. Agricultural spec fine dust tolerant - wide fin spacing. Fuel Tank Secure, lockable ground level filling. Integrated into lower section of the frame to keep a low centre of gravity. Fuel Tank Capacity 100 litres Air Cleaner Type Cyclonic pre-cleaner continuously vacuum scavenged through the exhaust. Primary filter with second safety filter with dash mounted restriction indicator. Twice the dust holding capacity of conventional air cleaners. OPERATING WEIGHTS Boom Boom In Out Unladen Front kg kg Unladen Rear Unladen Total kg kg kg kg Safe Working Load kg kg Tipping Load kg kg Hydrostatic Drive System Servo controlled Variable displacement Wheel Drive System Robust, proven Bell planetary hub driven by high displacement radial piston motor with fail to safe spring applied hydraulically released multidisc wet brake. Wheel Drive Make & Model Bell #29P Service Brake Hydrostatic braking through the Maximum Flow at Engine Rated Speed 60.9 l/min 241 bar Boom lift & lower Maximum Flow at Engine Rated Speed 39.4 l/min 280 bar Maximum Continuous Pressure 250 bar Attachment - Grapple Open/Close, Tele Ext in/out and Rotator Tank Integrated within the tubular frame Tank Capacity 140 litres Tank Breather Remote to filler cap, 3 micron rating, 0.75 bar pressure Hydraulic Cooler Air Fin Spacing Easy to clean wide fin spacing System 12 volt system with a single maintenance free battery mounted in the rear of the machine above the tail wheel. Alternator Output 12v 80 Amp Starter Motor Rating 12v 3.0 kw Fuse Box Blade fuses located inside the cabin in the instrumentation box Battery Maintenance free gel filled battery 100 Amp Hour rating Battery Isolator Single pole type with lock out mounted onto the right hand side of the frame 8 lights in total. 4 facing forwards, 2 facing rearwards, 1 facing side ways on each side of the frame. Strobe Light Mounted on the rear of frame Interior lights LED mounted inside the cab and inside the engine bay. Warning Lights/Instrumentation Engine coolant temperature high Hydraulic oil temperature high Low fuel Battery charge Cold start Park brake active Reverse Camera Fleetm@tic Switches Ignition (key) Hour metre Park brake Horn Work lights Interior lights Cold start aid Windscreen wiper Window washer HVAC Battery isolator Sensors Low fuel level Door open proximity Seat belt proximity Engine coolant temp Hydraulic oil temperature Reverse proximity Front Wheelsets l 18.4x26 10Ply Logger s 18.4x26 10Ply Logger Dual Wheel s 18.4x30 10Ply Logger s 18.4x34 10Ply Forestry Special s 23.1x26 LS2 16Ply General s 23.1x26 LS2 16Ply Trelleborg T418 Rear Wheelsets l 400x Ply s 18.00x Ply Seat l Unsuspended Lap Belt s Unsuspended 4 Point Harness s Suspended Attachment l #35 with damped link s #35 with-out damped link s #43 with damped link s #43 with-out damped link l Halogen Lights s LED Lights (1800 Lum) s LED Lights (3500 Lum) Boom s Crank Boom l Tele Boom s Ext Tele Boom Language l English s French s Spanish Cab l Basic Option s Cab Doors (no glazing) with Cab Doors (no glazing in doors) s Full Deluxe - Cab doors, full glazing, HVAC, sound kit Counter Weight s 1 Weight l 4 Weights Miscellaneous s Reverse Camera s Rear View Side Mirrors (Note: not available if Log Rest Option is selected) s Log Rest s Fire Extinguisher s Fleetm@tic s Back up alarm s CE Exempt Note: Tyre sizes indicated represent available tyres at printing. Please ensure your choice is available at time of ordering. 6
7 Dimensions NOTE: All dimensions are Unladen values based on the Standard Wheelsets and Grab with Damper U.O.N Negative (-) dimension value denotes position below ground level or behind front of wheel, whichever is applicable. TRANSPORT POSITION OPERATING POSITION N B1 B O Q L D M K I DF DC1 C A E G S H J T R P MACHINE DIMENSIONS A Length-Transport Position with #35 Grab Closed - Teleboom Retracted mm A Length-Transport Position with #35 Grab Closed - Teleboom Extended mm A Length-Transport Position with #43 Grab Closed - Teleboom Retracted mm A Length-Transport Position with #43 Grab Closed - Teleboom Extended mm B Height-Transport Position with #35 Grab Closed - Teleboom Retracted mm B1 Height-Transport Position with #35 Grab Closed - Teleboom Extended mm B Height-Transport Position with #43 Grab Closed - Teleboom Retracted mm B1 Height-Transport Position with #43 Grab Closed - Teleboom Extended mm C Front Axle Centre to Tailwheel Axle Centre mm C1 Front Axle Centre to Tailwheel Axle Centre mm D Ground Clearance-Front Axle Box mm E Front Tyre-Free Radius (Free Diameter) E (Std Wheelset) mm ( Ø 1 615) E (Option 1) mm ( Ø 1 458) E3 18.4/15-30 (Option 2) mm ( Ø 1 549) E (Option 3) mm ( Ø 1 675) E (Option 4-Dual Wheelset) mm ( Ø 1 458) F Tailwheel-Free Radius (Free Diameter) F (Std Wheelset) mm ( Ø 864) F (Option 1) mm ( Ø 980) G Reach-Grab Ground Leve l - #35 Grab with Teleboom Retracted mm G Reach-Grab Ground Leve l - #35 Grab with Teleboom Extended mm G Reach-Grab Ground Leve l - #43 Grab with Teleboom Retracted mm G Reach-Grab Ground Leve l - #43 Grab with Teleboom Extended mm H Track Width-Front H (Std Wheelset) mm H (Option 1) mm H3 18.4/15-30 (Option 2) mm H (Option 3) mm H (Option 4-Dual Wheelset) mm I Inside Tyre Width-Front I (Std Wheelset) mm I (Option 1) mm I3 18.4/15-30 (Option 2) mm I (Option 3) mm I (Option 4-Dual Wheelset) mm J Width over Tyres-Front J (Std Wheelset) mm J (Option 1) mm J3 18.4/15-30 (Option 2) mm J (Option 3) mm J (Option 4-Dual Wheelset) mm K Tyre Width-Tailwheel K (Std Wheelset) mm K (Option 1) mm L Load Over Height - #35 Grab with Teleboom Retracted mm L Load Over Height - #35 Grab with Teleboom Extended mm L Load Over Height - #43 Grab with Teleboom Retracted mm L Load Over Height - #43 Grab with Teleboom Extended mm M Grab Pivot Height-Boom Down Position with Teleboom Retracted mm M Grab Pivot Height-Boom Down Position with Teleboom Extended mm N Reach-Grab Pivot-Boom Up Position with Teleboom Retracted mm N Reach-Grab Pivot-Boom Up Position with Teleboom Extended mm O Reach-Grab Pivot-Boom Down Position with Teleboom Retracted...39 mm O Reach-Grab Pivot-Boom Down Position with Teleboom Extended mm P Maximum Reach-Grab Pivot with Teleboom Retracted mm P Maximum Reach-Grab Pivot with Teleboom Extended mm Q Height-Grab Maximum Reach with Teleboom Retracted mm Q Height-Grab Maximum Reach with Teleboom Extended mm R Grab Open - # mm R Grab Open - # mm S Maximum Reach-Below Ground - #35 Grab with Teleboom Retracted mm S Maximum Reach-Below Ground - #35 Grab with Teleboom Extended mm S Maximum Reach-Below Ground - #43 Grab with Teleboom Retracted mm S Maximum Reach-Below Ground - #43 Grab with Teleboom Extended mm T Front Axle Centre to Tailwheel Pivot Centre mm Pre bunching pulp for grapple skidder. Short distance skidding of pulp or mining timber. Removal of timber from a skyline landing deck. Sorting and stacking pulp, mining and sawlogs on roadside or in mill yards. Roadside loading of pulp, mining and sawlogs onto transport vehicles. Teleboom (increased lifting capacity & extended reach) - Heavier timber - Confined areas - Challenging landing decks - Difficult ground conditions Larger tyres may be fitted for zone loading where the zone surface is in good condition. LOW capital outlay. LOW operating cost due to few working parts. LOW fuel consumption. SIMPLE to maintain. MULTI purpose unit. Highly MANOEUVRABLE. 7
8 Specifications - 225FHP Crank Logger OPTIONS: l STANDARD s OPTION ENGINE & ANCILLARIES HYDRAULIC SYSTEM ELECTRICAL OPTIONS Yanmar TNV98T Configuration 4 cylinder Aspiration Turbo charged Emission Level Tier II Governed Power 57 kw Governed Speed rpm Displacement cc Fuel Filter Type In-line water separator with separate spin on fuel filter. Fuel Filter 5 μm Coolant Capacity (Engine only) 4 litres Radiator Easy access and easy to clean. Agricultural spec fine dust tolerant - wide fin spacing. Fuel Tank Secure, lockable ground level filling. Integrated into lower section of the frame to keep a low centre of gravity. Fuel Tank Capacity 100 litres Air Cleaner Type Cyclonic pre-cleaner continuously vacuum scavenged through the exhaust. Primary filter with second safety filter with dash mounted restriction indicator. Twice the dust holding capacity of conventional air cleaners. OPERATING WEIGHTS Unladen Front kg Unladen Rear kg Unladen Total kg Safe Working Load kg Tipping Load kg Hydrostatic Drive System Servo controlled Variable displacement Wheel Drive System Robust, proven Bell planetary hub driven by high displacement radial piston motor with fail to safe spring applied hydraulically released multidisc wet brake. Wheel Drive Make & Model Bell #29P Service Brake Hydrostatic braking through the Maximum Flow at Engine Rated Speed 60.9 l/min 241 bar Boom lift & lower Maximum Flow at Engine Rated Speed 39.4 l/min 280 bar Maximum Continuous Pressure 250 bar Attachment - Grapple Open/Close, Tele Ext in/out and Rotator Tank Integrated within the tubular frame Tank Capacity 140 litres Tank Breather Remote to filler cap, 3 micron rating, 0.75 bar pressure Hydraulic Cooler Air Fin Spacing Easy to clean wide fin spacing System 12 volt system with a single maintenance free battery mounted in the rear of the machine above the tail wheel. Alternator Output 12v 80 Amp Starter Motor Rating 12v 3.0 kw Fuse Box Blade fuses located inside the cabin in the instrumentation box Battery Maintenance free gel filled battery 100 Amp Hour rating Battery Isolator Single pole type with lock out mounted onto the right hand side of the frame 8 lights in total. 4 facing forwards, 2 facing rearwards, 1 facing side ways on each side of the frame. Strobe Light Mounted on the rear of frame Interior lights LED mounted inside the cab and inside the engine bay. Warning Lights/Instrumentation Engine coolant temperature high Hydraulic oil temperature high Low fuel Battery charge Cold start Park brake active Reverse Camera Fleetm@tic Switches Ignition (key) Hour meter Park brake Horn Work lights Interior lights Cold start aid Windscreen wiper Window washer HVAC Battery isolator Sensors Low fuel level Door open proximity Seat belt proximity Engine coolant temp Hydraulic oil temperature Reverse proximity Front Wheelsets s 18.4x26 10Ply Logger s 18.4x26 10Ply Logger Dual Wheel s 18.4x30 10Ply Logger s 18.4x34 10Ply Forestry Special l 23.1x26 LS2 16Ply General s 23.1x26 LS2 16Ply Trelleborg T418 Rear Wheelsets l 400x Ply s 18.00x Ply Seat s Unsuspended Lap Belt s Unsuspended 4 Point Harness l Suspended Attachment s #35 with damped link s #35 with-out damped link l #43 with damped link s #43 with-out damped link l Halogen Lights s LED Lights (1800 Lum) s LED Lights (3500 Lum) Boom l Crank Boom s Tele Boom s Ext Tele Boom Language l English s French s Spanish Cab s Basic Option s Cab Doors (no glazing) with Cab Doors (no glazing in doors) l Full Deluxe - Cab doors, full glazing, HVAC, sound kit Counter Weight s 1 Weight l 4 Weights Miscellaneous s Reverse Camera s Rear View Side Mirrors (Note: not available if Log Rest Option is selected) s Log Rest s Fire Extinguisher s Fleetm@tic s Back up alarm s CE Exempt Note: Tyre sizes indicated represent available tyres at printing. Please ensure your choice is available at time of ordering. 8
9 Dimensions NOTE: All dimensions are Unladen values based on the Standard Wheelsets and Grab with Damper U.O.N Negative (-) dimension value denotes position below ground level or behind front of wheel, whichever is applicable. TRANSPORT POSITION OPERATING POSITION N B O L D Q K DF DC1 C E G I A M H J T S R MACHINE DIMENSIONS A Length-Transport Position with #35 Grab Closed mm A Length-Transport Position with #43 Grab Closed mm B Height-Transport Position with Grab closed mm C Front Axle Centre to Tailwheel Axle Centre mm C1 Front Axle Centre to Tailwheel Axle Centre mm D Ground Clearance-Front Axle Box mm E Front Tyre-Free Radius (Free Diameter) E (Std Wheelset) mm ( Ø 1 615) E (Option 1) mm ( Ø 1 458) E3 18.4/15-30 (Option 2) mm ( Ø 1 549) E (Option 3) mm ( Ø 1 675) E (Option 4-Dual Wheelset) mm ( Ø 1 458) F Tailwheel-Free Radius (Free Diameter) F (Std Wheelset) mm ( Ø 864) F (Option 1) mm ( Ø 980) G Reach-Grab Ground Leve l - #35 Grab mm G Reach-Grab Ground Level - #43 Grab mm H Track Width-Front H (Std Wheelset) mm H (Option 1) mm H3 18.4/15-30 (Option 2) mm H (Option 3) mm H (Option 4-Dual Wheelset) mm I Inside Tyre Width-Front I (Std Wheelset) mm I (Option 1) mm I3 18.4/15-30 (Option 2) mm I (Option 3) mm I (Option 4-Dual Wheelset) mm J Width over Tyres-Front J (Std Wheelset) mm J (Option 1) mm J3 18.4/15-30 (Option 2) mm J (Option 3) mm J (Option 4-Dual Wheelset) mm K Tyre Width-Tailwheel K (Std Wheelset) mm K (Option 1) 450 mm L Load Over Height - #35 Grab mm L Load Over Height - #43 Grab mm M Grab Pivot Height-Boom Down Position mm N Reach-Grab Pivot-Boom Up Position...44 mm O Reach-Grab Pivot-Boom Down Position mm P Maximum Reach-Grab Pivot mm Q Height-Grab Maximum Reach mm R Grab Open - # mm R Grab Open - # mm S Maximum Reach-Below Ground - #35 Grab mm S Maximum Reach-Below Ground - #43 Grab mm T Front Axle Centre to Tailwheel Pivot Centre mm P Pre bunching pulp for grapple skidder. Short distance skidding of pulp or mining timber. Removal of timber from a skyline landing deck. Sorting and stacking pulp, mining and sawlogs on roadside or in mill yards. Roadside loading of pulp, mining and sawlogs onto transport vehicles. LOW capital outlay. LOW operating cost due to few working parts. LOW fuel consumption. SIMPLE to maintain. MULTI purpose unit. Highly MANOEUVRABLE. 9
10 Specifications - 225FHP Tele Logger OPTIONS: l STANDARD s OPTION ENGINE & ANCILLARIES HYDRAULIC SYSTEM ELECTRICAL OPTIONS Yanmar TNV98T Configuration 4 cylinder Aspiration Turbo charged Emission Level Tier II Governed Power 57 kw Governed Speed rpm Displacement cc Fuel Filter Type In-line water separator with separate spin on fuel filter. Fuel Filter 5 μm Coolant Capacity (Engine only) 4 litres Radiator Easy access and easy to clean. Agricultural spec fine dust tolerant - wide fin spacing. Fuel Tank Secure, lockable ground level filling. Integrated into lower section of the frame to keep a low centre of gravity. Fuel Tank Capacity 100 litres Air Cleaner Type Cyclonic pre-cleaner continuously vacuum scavenged through the exhaust. Primary filter with second safety filter with dash mounted restriction indicator. Twice the dust holding capacity of conventional air cleaners. OPERATING WEIGHTS Boom Boom In Out Unladen Front kg kg Unladen Rear Unladen Total kg kg kg kg Safe Working Load kg kg Tipping Load kg kg Hydrostatic Drive System Servo controlled Variable displacement Wheel Drive System Robust, proven Bell planetary hub driven by high displacement radial piston motor with fail to safe spring applied hydraulically released multidisc wet brake. Wheel Drive Make & Model Bell #29P Service Brake Hydrostatic braking through the Maximum Flow at Engine Rated Speed 60.9 l/min 241 bar Boom lift & lower Maximum Flow at Engine Rated Speed 39.4 l/min 280 bar Maximum Continuous Pressure 250 bar Attachment - Grapple Open/Close, Tele Ext in/out and Rotator Tank Integrated within the tubular frame Tank Capacity 140 litres Tank Breather Remote to filler cap, 3 micron rating, 0.75 bar pressure Hydraulic Cooler Air Fin Spacing Easy to clean wide fin spacing System 12 volt system with a single maintenance free battery mounted in the rear of the machine above the tail wheel. Alternator Output 12v 80 Amp Starter Motor Rating 12v 3.0 kw Fuse Box Blade fuses located inside the cabin in the instrumentation box Battery Maintenance free gel filled battery 100 Amp Hour rating Battery Isolator Single pole type with lock out mounted onto the right hand side of the frame 8 lights in total. 4 facing forwards, 2 facing rearwards, 1 facing side ways on each side of the frame. Strobe Light Mounted on the rear of frame Interior lights LED mounted inside the cab and inside the engine bay. Warning Lights/Instrumentation Engine coolant temperature high Hydraulic oil temperature high Low fuel Battery charge Cold start Park brake active Reverse Camera Fleetm@tic Switches Ignition (key) Hour metre Park brake Horn Work lights Interior lights Cold start aid Windscreen wiper Window washer HVAC Battery isolator Sensors Low fuel level Door open proximity Seat belt proximity Engine coolant temp Hydraulic oil temperature Reverse proximity Front Wheelsets s 18.4x26 10Ply Logger s 18.4x26 10Ply Logger Dual Wheel s 18.4x30 10Ply Logger s 18.4x34 10Ply Forestry Special l 23.1x26 LS2 16Ply General s 23.1x26 LS2 16Ply Trelleborg T418 Rear Wheelsets l 400x Ply s 18.00x Ply Seat s Unsuspended Lap Belt s Unsuspended 4 Point Harness l Suspended Attachment s #35 with damped link s #35 with-out damped link l #43 with damped link s #43 with-out damped link l Halogen Lights s LED Lights (1800 Lum) s LED Lights (3500 Lum) Boom s Crank Boom l Tele Boom s Ext Tele Boom Language l English s French s Spanish Cab s Basic Option s Cab Doors (no glazing) with Cab Doors (no glazing in doors) l Full Deluxe - Cab doors, full glazing, HVAC, sound kit Counter Weight s 1 Weight l 4 Weights Miscellaneous s Reverse Camera s Rear View Side Mirrors (Note: not available if Log Rest Option is selected) s Log Rest s Fire Extinguisher s Fleetm@tic s Back up alarm s CE Exempt Note: Tyre sizes indicated represent available tyres at printing. Please ensure your choice is available at time of ordering. 10
11 Dimensions NOTE: All dimensions are Unladen values based on the Standard Wheelsets and Grab with Damper U.O.N Negative (-) dimension value denotes position below ground level or behind front of wheel, whichever is applicable. TRANSPORT POSITION OPERATING POSITION N B1 B O Q L D M K I DF DC1 C A E G S H J T R P MACHINE DIMENSIONS A Length-Transport Position with #35 Grab Closed - Teleboom Retracted mm A Length-Transport Position with #35 Grab Closed - Teleboom Extended mm A Length-Transport Position with #43 Grab Closed - Teleboom Retracted mm A Length-Transport Position with #43 Grab Closed - Teleboom Extended mm B Height-Transport Position with #35 Grab Closed - Teleboom Retracted mm B1 Height-Transport Position with #35 Grab Closed - Teleboom Extended mm B Height-Transport Position with #43 Grab Closed - Teleboom Retracted mm B1 Height-Transport Position with #43 Grab Closed - Teleboom Extended mm C Front Axle Centre to Tailwheel Axle Centre mm C1 Front Axle Centre to Tailwheel Axle Centre mm D Ground Clearance-Front Axle Box mm E Front Tyre-Free Radius (Free Diameter) E (Std Wheelset) mm ( Ø 1 615) E (Option 1) mm ( Ø 1 458) E3 18.4/15-30 (Option 2) mm ( Ø 1 549) E (Option 3) mm ( Ø 1 675) E (Option 4-Dual Wheelset) mm ( Ø 1 458) F Tailwheel-Free Radius (Free Diameter) F (Std Wheelset) mm ( Ø 864) F (Option 1) mm ( Ø 980) G Reach-Grab Ground Leve l - #35 Grab with Teleboom Retracted mm G Reach-Grab Ground Leve l - #35 Grab with Teleboom Extended mm G Reach-Grab Ground Leve l - #43 Grab with Teleboom Retracted mm G Reach-Grab Ground Leve l - #43 Grab with Teleboom Extended mm H Track Width-Front H (Std Wheelset) mm H (Option 1) mm H3 18.4/15-30 (Option 2) mm H (Option 3) mm H (Option 4-Dual Wheelset) mm I Inside Tyre Width-Front I (Std Wheelset) mm I (Option 1) mm I3 18.4/15-30 (Option 2) mm I (Option 3) mm I (Option 4-Dual Wheelset) mm J Width over Tyres-Front J (Std Wheelset) mm J (Option 1) mm J3 18.4/15-30 (Option 2) mm J (Option 3) mm J (Option 4-Dual Wheelset) mm K Tyre Width-Tailwheel K (Std Wheelset) mm K (Option 1) mm L Load Over Height - #35 Grab with Teleboom Retracted mm L Load Over Height - #35 Grab with Teleboom Extended mm L Load Over Height - #43 Grab with Teleboom Retracted mm L Load Over Height - #43 Grab with Teleboom Extended mm M Grab Pivot Height-Boom Down Position with Teleboom Retracted mm M Grab Pivot Height-Boom Down Position with Teleboom Extended mm N Reach-Grab Pivot-Boom Up Position with Teleboom Retracted mm N Reach-Grab Pivot-Boom Up Position with Teleboom Extended mm O Reach-Grab Pivot-Boom Down Position with Teleboom Retracted...39 mm O Reach-Grab Pivot-Boom Down Position with Teleboom Extended mm P Maximum Reach-Grab Pivot with Teleboom Retracted mm P Maximum Reach-Grab Pivot with Teleboom Extended mm Q Height-Grab Maximum Reach with Teleboom Retracted mm Q Height-Grab Maximum Reach with Teleboom Extended mm R Grab Open - # mm R Grab Open - # mm S Maximum Reach-Below Ground - #35 Grab with Teleboom Retracted mm S Maximum Reach-Below Ground - #35 Grab with Teleboom Extended mm S Maximum Reach-Below Ground - #43 Grab with Teleboom Retracted mm S Maximum Reach-Below Ground - #43 Grab with Teleboom Extended mm T Front Axle Centre to Tailwheel Pivot Centre mm Pre bunching pulp for grapple skidder. Short distance skidding of pulp or mining timber. Removal of timber from a skyline landing deck. Sorting and stacking pulp, mining and sawlogs on roadside or in mill yards. Roadside loading of pulp, mining and sawlogs onto transport vehicles. LOW capital outlay. LOW operating cost due to few working parts. LOW fuel consumption. SIMPLE to maintain. MULTI purpose unit. Highly MANOEUVRABLE. ENHANCED operator comfort. Focus on ERGONOMICS improves productivity. 11
12 Please note that all information supplied in this manual is intended to assist the customer in understanding the general applications of the Bell Equipment sugarcane handling range of machines. Performance information is intended for estimating purposes only. Due to the many variables unique to individual operations such as weather, terrain, ground conditions, operator productivity, etc neither Bell Equipment Company nor its dealers warrant that the machines described will perform as estimated. Due to Bell Equipment s policy of constant product improvement, specifications are subject to change without notice. BELL INTERNATIONAL: Tel: +27 (0) marketing@bellequipment.com Web: Tel: +61 (0) Tel: +33 (0) Tel: +49 (0) Tel: Tel: +27 (0) Tel: (704) Tel: +44 (0) Broch F-series Logger Brochure (English)
Loggers. 125A l 220A l 225A l 220E l 225E
Loggers 125A l 220A l 225A l 220E l 225E 1 Simplicity is the ultimate sophistica Bell Loggers are derived from the successful Bell Cane Loaders and to this day remain the lowest cost solution to sorting,
More informationCane Loaders. I 125A 3 cylinder l 125A 4 cylinder I 125A 4 cylinder (Regulated) I 220A 4 cylinder
Cane Loaders I 125A 3 cylinder l 125A 4 cylinder I 125A 4 cylinder (Regulated) I 220A 4 cylinder Bell Cane Loaders Bell Cane Loaders represent the first production machine produced by Bell and are a symbol
More informationRough Terrain Forklifts. 1120A FORKLIFT l 220A FORKLIFT l 220A VERSLIFT
Rough Terrain Forklifts 1120A FORKLIFT l 220A FORKLIFT l 220A VERSLIFT Engineered for m manoeuvrability Bell s range of forklifts have been engineered in response to a need for a manoeuvrable, lifting
More informationSolid Pedigree. Bell Equipment s range of trailer are built on a solid pedigree of strong, reliable, machines.
Trailers Solid Pedigree Bell Equipment s range of trailer are built on a solid pedigree of strong, reliable, machines. The longevity of each and every one of these trailers, reinforces this foundation,
More informationSolid Pedigree. Bell Equipment s range of trailer are built on a solid pedigree of strong, reliable, machines.
Trailers Solid Pedigree Bell Equipment s range of trailer are built on a solid pedigree of strong, reliable, machines. The longevity of each and every one of these trailers, reinforces this foundation,
More informationTRACK LOADERS RADIAL LIFT 1750RT NXT2 2100RT NXT2 2500RT
TRACK LOADERS RADIAL LIFT 1750RT NXT2 2100RT NXT2 2500RT IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationMotor Grader. BG 240 T-5 (6x4) / BG 240 TA-5 (6x6)
Motor Grader BG 240 T-5 (6x4) / BG 240 TA-5 (6x6) BG 240 T-5 (6 x 4) BG 240 TA-5 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary
Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach
More informationRADIAL-LIFT TRACK LOADERS RT175 RT210
RADIAL-LIFT TRACK LOADERS RT175 RT210 In 1859, an agricultural implement company, housed in a blacksmith shop, was started in West Bend, Wisconsin. From these humble beginnings, the Gehl brand has become
More informationJCB LOADALL HiViz / HiViz
JCB LOADALL - HiViz / - HiViz MAX. PAYLOAD: MAX. LIFT HEIGHT:. tonnes (lb). metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A A H H D J E K D J E K B F B F G
More informationSANDVIK LH202 NARROW VEIN LOADER
SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202
More informationTB138FR COMPACT EXCAVATOR. Operating Weight: 3,935 kg. From World First to World Leader
COMPACT EXCAVATOR TB138FR From World First to World Leader Operating Weight: 3,935 kg Product Features & Specifications ENGINE - EU Stage III A / EPA Interim Tier 4 Emission Compliant - Automatic Fuel
More informationLX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm
S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40
More information860C/870C/L870C FELLER BUNCHERS
860C/870C/ FELLER BUNCHERS The C-series feller bunchers Tigercat 860C, 870C and feller bunchers are high production, extreme duty, final fell machines. They are well suited to large timber, mixed stands,
More informationTechnical Specifications SENNEBOGEN Rubber Tired Material Handler
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSB.-C Tier Final HP ( kw) Reach standard optional '" (. m) (stick pin) '" (
More informationTechnical Specifications
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier Final HP (18 kw) 8,9 lb (8, kg) Reach
More informationMini Excavator 8018 CTS
NEW Mini Excavator Operating Weight: 1822 kg (4016 lb) Net Engine Power: 14.2 kw (19 hp) A Product of Hard Work MINI EXCAVATORS OPERATING WEIGHT: 1822 kg (4016 lbs) NET ENGINE POWER: 14.2 kw (19hp) K D
More informationMINI EXCAVATOR. ViO12. Operating weight Engine Tear-out force Breakout force kg 3TNV70-WBVB 5,6 kn 13,7 kn
MINI EXCAVATOR ViO12 Operating weight Engine Tear-out force Breakout force 1 235 kg 3TNV70-WBVB 5,6 kn 13,7 kn Simply the best COMPACTNESS Here s the shape for simple and efficient work in confined spaces.
More informationTL12 Compact Track Loader
Those in the know, know Takeuchi TL12 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - EPA Interim Tier 4 Compliant - Turbocharged and Intercooled - DOC+DPF Exhaust
More informationJCB WHEELED EXCAVATOR JS160W
MAX. OPERATING WEIGHT NETT ENGINE POWER 17770kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width between dual wheels 2490 (8-2) C Ground
More informationHigh Reach Construction. Telescopic Handlers
High Reach Construction Telescopic Handlers 2 The sky s the limit How can you keep your feet firmly on the ground when you are more than 17 metres up in the air? Whether you re lifting people or material,
More informationFORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III
FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III Operator Station: Comforts such as swivel seat, ergonomically located controls, and all-season climate controls help keep productivity up. Grapple:
More information6 2 0 C & C S K I D D E R S
620C & 630C SKIDDERS The Difference is in the Drive The C-series skidders are equipped with Tigercat's advanced hydrostatic drive system. This hydrostatic transmission is unique to Tigercat skidders. After
More informationSandvik TH551 Technical Specification
Spec. number TH551-05 2014-08-14 Technical Specification APPLICATIONS The is a high performance 51 tonne articulated underground dump truck for use in 5 x 5 meter haulage ways. Operator safety, health
More information848H. Grapple Skidder. Overview. Features & Specs. Skidding performance that moves you forward.
Home / Skidders / 848H 848H Grapple Skidder Features & Specs 6.8L Tier 3 PowerTech Plus engine Grapple automatically maintains clamp force Long wheelbase and wide stance deliver unsurpassed stability Excellent
More information534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)
534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice
More informationpreliminary Technical Specifications SENNEBOGEN Tracked Material Handler Leading Through Innovation Reach Standard 36' (11 m) Engine
Technical Specifications SENNEBOGEN Tracked Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight R/Crawler Undercarriage Cummins QSB., Tier Final 13 HP (97 kw)
More informationSkid Steers. Engine power: 56 to 83 hp (42 to 62 kw) Operating load: 680 to 910 kg
Skid Steers Engine power: 56 to 83 hp (42 to 62 kw) Operating load: 680 to 910 kg C O M M I T T E D T O Y O U R N E E D S Compact and stable The compact size of Case skid steers is appreciated wherever
More informationCOMPACT TRACK LOADER. From World First to World Leader
COMPACT TRACK LOADER TL6R From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Active
More informationTB240 COMPACT EXCAVATOR. Operating Weight: 4,070 kg. From World First to World Leader
COMPACT EXCAVATOR TB240 From World First to World Leader Operating Weight: 4,070 kg Product Features & Specifications ENGINE - Machine Models 124000003 or Later: EU Stage III A / EPA Tier 4 Emission Compliant
More informationJCB WHEELED EXCAVATOR JS145W
MAX. OPERATING WEIGHT NETT ENGINE POWER 15145kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width over dual wheels 2490 (8-2) C Ground
More informationInline 6 series turbocharger with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) Valves per Cylinder 4
SPECIFICATIONS Engine Manufacturer and Model John Deere PowerTech PSS 6090 Non-Road Emission Standards EPA Final Tier 4/EU Stage IV Configuration Inline 6 series turbocharger with exhaust gas recirculation
More informationPC130F-7 HYDRAULIC EXCAVATOR 130F FLYWHEEL HORSEPOWER OPERATING WEIGHT kg, lb. 66 kw rpm
FLYWHEEL HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERATING WEIGHT 13.975 kg, 30.809 lb PC 130F 200-8 130F Photo may include optional equipment. HYDRAULIC EXCAVATOR H YDRAULIC E XCAVATOR WALK-AROUND The hydraulic
More informationSandvik TH663 Technical Specification
Spec. number TH663-04 Technical Specification APPLICATIONS The is a high productivity 63 tonne articulated underground dump truck for use in 6 x 6 meter haulage ways. Operator safety, health and comfort
More informationSCORPION 6030 CP Compact and powerful the new addition to the SCORPION range.
A compact master. SCORPION 6030 CP Compact and powerful the new addition to the SCORPION range. With the introduction of the new SCORPION 6030 CP, CLAAS brings you all the advantages of the tried-andtested
More informationFORWARDERS BENEFITS AND ADVANTAGES:
FORWARDERS Tigercat forwarders, ranging in capacity from 14 to 25 tonne, are designed to achieve high production and lowest cost per tonne in the world's most demanding transporting applications. BENEFITS
More informationA Product of Hard Work BACKHOE LOADER 1CX SERIES
A Product of Hard Work BAKHOE LOADER X SERIES Big solution in a small package Superb manoeuvrability lets you operate in tight areas Wide choice of loader and backhoe attachments increases versatility
More informationTH215 Compact Telehandler
TH215 Compact Telehandler Engine Model Gross Power Weights Operating Weight Operating Specifications Rated Load Capacity Maximum Lift Height Cat 3054B-DI 63 kw 84 hp 5500 kg 12,100 lb 2500 kg 5.5 m 5,500
More information145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR
Page 1 Mountrail County Road and Bridge S FOR Bidder's Instructions: Indicate compliance to the specifications on the YES/NO line by each specification. Indicate any deviations from the specifications
More informationLOADALL / HiViz
LOADALL -/- HiViz MAX. PAYLOAD:. tonnes (lb) MAX. LIFT HEIGHT:. metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A - A - H H D J E K D J E K B F B F G G STATIC
More informationE-series wheeled loading shovels
www.bellequipment.co.uk E-series wheeled loading shovels Quarry applications FREEPHONE 0800 915 7700 sales@bellequipment.co.uk Strong Reliable Machines Strong Reliable Support Standard equipment on Bell
More informationPRELIMINARY. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Cummins QSG1, Tier Net Power HP (1 kw) Reach standard optional '" (1. m) (stick pin) '8" (19.1
More informationMINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS
OPERATING WEIGHTS: 4300 kg (9480 lb), 4750 kg (10472 lb) & 5253 kg (11511lb) NET ENGINE POWER: 33.1 kw (45 hp) STATIC DIMENSIONS mm (ft-in) mm (ft-in) mm (ft-in) A Sprocket idler centres 1845 (6-1) 1990
More informationPneumatic Diesel Forklift Trucks
R Pneumatic Diesel Forklift Trucks D110 / 130 / 160S-5 11,000kg to 16,000kg Capacity D110 / 130 / 160S-5 11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire Printed in Repubic of Korea PSC2604D0(Mar.2007)
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB280FR From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel
More informationNEW 430ZX PLUS MOST RELIABLE & FUEL EFFICIENT WHEELED LOADER
NEW 430ZX PLUS MOST RELIABLE & FUEL EFFICIENT WHEELED LOADER Operating weight: 11250 kg Engine power: 99 kw (133hp) Payload: 3300 kg Standard shovel capacity: 1.7 cum Best-in-class Fuel Efficiency Most
More informationCharmec MF 605 DA. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Charmec MC 605 ANFO charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationLiebherr Straddle Carrier
Liebherr Straddle Carrier 1 1 Overview 8 wheels 3 containers high (1 over 2) 40.6t S.W.L under spreader Single lift, hydraulic spreader Container handling: 20ft, 30ft, 40ft and 45ft Liebherr electric AC
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationTL6R COMPACT TRACK LOADER. Operating Weight: 3,395 kg. From World First to World Leader
COMPACT TRACK LOADER TL6R From World First to World Leader Operating Weight: 3,395 kg Product Features & Specifications ENGINE - EU Stage III B / EPA Tier 4 Emission Compliant - Turbocharged - DOC+DPF
More informationMINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity
MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.
More informationJCB MINI EXCAVATORS 8040 & 8045 ZTS
OPERATING WEIGHTS: NET ENGINE POWER: 4300 kg (9480 lb) & 4750 kg (10472 lb) 33.1 kw (45 hp) D F K C G L H E A B I J STATIC DIMENSIONS A Sprocket idler centres 1845 (6-1) 1990 (6-6) B Undercarriage overall
More informationTL8 Compact Track Loader
Those in the know, know Takeuchi TL8 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After
More informationUT15-18P. Technical Specifications. Utility you can trust TM kg
UT15-18P - kg Technical Specifications Utility you can trust TM www.utilev.com UT15-18P Specifications Other Engine Performance Dimensions Wheels and Tyres Weights Characteristics 1.1 Manufacturer 1.2
More informationPressure system with spin-on filter & cooler Dual-stage dry type with safety element and evacuator valve
Engine Manufacture and Model Non-Road Emission Standards Displacement Net Peak Power (ISO 9249) Net Peak Torque (ISO 9249) John Deere PowerTechTM4045T turbocharged, standard EPA Tier 2 / EU Stage II emissions
More informationCOMPACT EXCAVATORS ZERO-TAIL-SWING 170Z 270Z 350Z 450Z 800Z
COMPACT EXCAVATORS ZERO-TAIL-SWING 170Z 270Z 350Z 450Z 800Z IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationHeavy Duty. Tipper Trucks (6x4) I 6520 (6x4) I (6x6) I (8x4)
Heavy Duty Tipper Trucks 65115 (6x4) I 6520 (6x4) I 65222 (6x6) I 65201 (8x4) BELL and Quality throughout Tough and reliable machinery distributed and supported by an organisation with an undeniable industry
More informationTHE TIGERCAT E-SERIES ARE THE WORLD S MOST ADVANCED, EFFICIENT AND PRODUCTIVE SKIDDERS.
FOUR-WHEEL SKIDDERS THE TIGERCAT E-SERIES ARE THE WORLD S MOST ADVANCED, EFFICIENT AND PRODUCTIVE SKIDDERS. The unique drive system combines hydrostatics with electronic control technology, delivering
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB260 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel Bleed
More informationRAMIRENT E62. Excavators Specifications. Dimensions
Dimensions (A) Blade height 410.0 mm (B) Clearance, upper structure to ground line 635.0 mm (C) Ground line to top of engine cover 1620.0 mm (D) Length of track on ground 1990.0 mm (E) Machine centre line
More informationM325B MH Wheeled Material Handler
M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb
More informationTH210 Compact Telehandler
TH210 Compact Telehandler Engine Model Gross Power Weights Operating Weight Operating Specifications Rated Load Capacity Maximum Lift Height Cat 3054B-DI 63 kw 84 hp 5000 kg 11,000 lb 2200 kg 5.2 m 4,850
More informationHydrema 922D 922D 2.55 DUMP TRUCKS. 2 / 900E-Serie
Hydrema 922D 922D 2.55 DUMP TRUCKS 2 / 900E-Serie HYDREMA 922D SERIES Versatile 20 T dump truck for terrain and road. The 922D Series is the obvious choice for soft, muddy terrain or for areas with sensitive
More informationLow unladen weight and superb tractive power. Transmission
922D 922 2 Ḍ 55 The Hydrema 922D is the obvious choice for driving on soft terrain and in areas that demand the lowest possible ground pressure. Hydrema s three-axle dump truck, with its unique articulated
More informationJCB BACKHOE LOADER 3C
MAX. ENGINE POWER 85hp (63kW) F E B C J H D A G STATIC DIMENSIONS JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All
More informationMATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m
MHL35 E MATERIAL HANDLER Specifications Standard Machine Weight Engine output Reach 75, lbs 34 t 215 hp 16 kw Up to 52.5 ft 16 m Features Fuel saving ECO & ECO+ operating modes enhance flexibility while
More information534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)
534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity
More informationSKID STEER LOADER 135 HD/155 HD
SKID STEER LOADER 135 HD/155 HD Operating weight: 2770 2900 kg Gross rated power: 34 42 kw (46 57 hp) PRODUCTIVE PERFORMANCE. POWER AND PERFORMANCE ARE ESSENTIAL FEATURES FOR ANY SKID STEER LOADER. WITH
More informationTS80V2 Skid Steer Loader
Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Specifications TOUGH, POWERFUL, RELIABLE Pressure Relieving Coupler Flat Faced Couplers High Flow Hydraulics
More informationScamec 2000 Breaker. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 Breaker is a self propelled diesel driven unit for mechanized breaking in underground mining and tunnelling. Scamec consist
More informationHighway Commissioner, Mike Lesperance reserves the right to reject any or all bids and waive technicalities.
March 11, 2016 Nunda Township Road District Skid Steer and Planer Purchase Bid Spec 92 HP Turbo Tier 4 Diesel Engine Air Intake Heater (Automatically Activated) Auxiliary Hydraulics: Variable Flow Backup
More informationHäggloader. A unique continuous loading system
Häggloader A unique continuous loading system 1 The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.
More informationScamec 2000 M. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 M is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
More informationScamec 2000 L. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 L is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
More informationSANDVIK LH208L LOW PROFILE LOADER
SANDVIK LH208L LOW PROFILE LOADER TECHNICAL SPECIFICATION Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile
More informationPRELIMINARY GREEN HYBRID. Technical Specifications SENNEBOGEN Rubber Tired Material Handler. Leading Through Innovation. Reach 69' (21 m) (stick pin)
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Cummins QSL9, Tier Final HP ( kw) Reach standard optional ' (18 m) (stick pin) 9' (1
More informationMH 20/25-4 T. Buggie. Compact trucks with 4 wheel drive. Capacity 2000 kg and 2500 kg. Overall height: less than 2 metres. Semi-Rough-Terrain
MH 20/25-4 T Buggie Compact trucks with 4 wheel drive Capacity 2000 kg and 2500 kg Overall height: less than 2 metres Semi-Rough-Terrain compact models with 4 wheel drive The ergonomically designed driver
More informationSKID STEER LOADER 135 HD/155 HD
SKID STEER LOADER 15 HD/155 HD Operating weight: 2770 2900 kg Gross rated power: 4 42 kw (46 57 hp) PRODUCTIVE PERFORMANCE. POWER AND PERFORMANCE ARE ESSENTIAL FEATURES FOR ANY SKID STEER LOADER. WITH
More informationTIGERCAT FORWARDERS, ARE DESIGNED TO ACHIEVE HIGH PRODUCTION AND LOWEST COST PER TONNE IN THE WORLD S MOST DEMANDING TRANSPORTING APPLICATIONS.
C-SERIES FORWARDERS TIGERCAT FORWARDERS, ARE DESIGNED TO ACHIEVE HIGH PRODUCTION AND LOWEST COST PER TONNE IN THE WORLD S MOST DEMANDING TRANSPORTING APPLICATIONS. Innovative low-wide bunk system with
More informationS P E C I F I C A T I O N S
S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m
More informationCharmec LC 605 D(V) Features. Technical data sheet
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
More informationSKID STEER LOADER From World First to World Leader
TS80V2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S EPA Final Tier 4 Emission Compliant - Maintenance
More informationDoosan Infracore DX225LL TECHNICAL DATA
Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)
More informationTRACKED EXCAVATOR JS145HD
MAX. OPERATING WEIGHT: 18011 kg ENGINE POWER: 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres A Track length on ground 3090 B Undercarriage overall length 3940 C Track
More informationCrawler Tractor PR 734-4
Crawler Tractor PR 734-4 litronic` Engine output: 150 kw / 204 HP Operating weight: 17,960 20,000 kg Basic machine Engine Liebherr Diesel engine Rating (ISO 9249) Rating (SAE J1349) Rated speed Displacement
More informationHako-Citytrac 4200 DA
Multi-power for use all year round. Maintenance of Parks and Grounds There s a lot to do in the city. Cleanliness and safety in towns makes great demands on local authorities. Whether dust or dirt, leaves
More informationTS80V2 Skid Steer Loader
Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Product Features & Specifications ENGINE --Four Cylinder Turbocharged Deutz Diesel Engine -U.S. - EPA FINAL
More informationMINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity
MINETRUCK MT2010 Underground articulated truck with 20-tonne load capacity MINETRUCK MT 2010 COMPACT AND QUICK FOR EFFICIENT HAULAGE MT2010 IS AND ARTICULATED UNDERGROUND TRUCK WITH A LOAD CAPACITY OF
More informationWH 716. Telescopic Handler WH716. LIFTING HEIGHT mm LIFTING CAPACITY kg OPERATING WEIGHT kg
WH 716 Telescopic Handler WH716 LIFTING HEIGHT 16.100 mm LIFTING CAPACITY 4.000 kg OPERATING WEIGHT 11.590 kg Walk-Around The WH716 belongs to the series of Komatsu telescopic handlers, which offers: -
More informationSKID STEER LOADER From World First to World Leader
TS80R2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S. EPA FINAL TIER 4 Emission Compliant - Maintenance
More informationUtimec LF 700 Agitator
Pictured machine may include options and additional equipment. Features Utimec LF 700 Agitator with practical concrete transport capacity of 7 m 3 is designed for concrete transportation in underground
More informationUtimec SF 060 Material
Pictured machine may include options and additional equipment. Features Utimec SF 060 Material vehicle is designed for material transportation in small or medium size tunnel cross sections. With the transport
More informationEW210D MH. VOLVO WHEELED EXCAVATOR 24 t 129kW
EW210D MH VOLVO WHEELED EXCAVATOR 24 t 129kW The multi-purpose medium material handler Throughout the years, the Volvo Wheeled Excavator has proven to be a multi-purpose machine for a range of different
More informationCharmec MC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Charmec MF 605 D charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationTelescopic Handlers. Product Range
Telescopic Handlers Product Range Performance, precision and safety all in one n High capacity at maximum reach, for easy handling of any tasks With best-in-class lifting capacity - even at maximum reach
More informationTELESCOPIC HANDLERS T40140 T40180 STAGE IIIB
TELESCOPIC HANDLERS T40140 T40180 STAGE IIIB Full flexibility A complete set of attachments provides full flexibility and job compatibility. Maximum uptime Side-mounted engine and easy-to- access maintenance
More informationTechnical Specifications SENNEBOGEN Demolition Machine
Technical Specifications SENNEBOGEN Demolition Machine Leading Through Innovation Engine Model Net Power Cummins QSB.7 Tier Final HP (18 kw) Operating Weight Approx. 9,78 lb (3,9 kg) Technical Specifications
More informationMINI EXCAVATORS 8014/8016/8020 CTS
MINI EXCAVATORS // CTS OPERATING WEIGHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NETT ENGINE POWER:. kw (9hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model CTS CTS CTS mm (ft-in)
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB235-2 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 - Automatic Fuel Bleed System - Dual Element Air Filter - Automatic Idle ELECTRICAL
More information