TOOLS. All Steel Hose Reel. POWER HEAD - 1/2" Angled Impact Wrench. MAGNUM 1/2" Mini Impact Gun. Professional trade tools and abrasives Spring

Transcription

1 TOOLS Professional trade tools and abrasives Spring All Steel Hose Reel 15mt x 10mm ID Hose Steel body with steel mounting bracket Brass 1/4" BSP outlet 15mt x 10mm I.D. Hose German made Lay-Flat rubber hose Auto rewind with heavy duty ratchet 15mt High quality German made lay-flat composite rubber hose! Only $ MG-HR15 POWER HEAD - 1/2" Angled Impact Wrench MG-IR200 $ Reach of a ratchet Power of a gun 2x the Power of a regular air ratchet IMPACT HEAD NO REACTION TORQUE 180ft-lbs (245Nm) Max torque Reactionless torque Less than 2" Head height Fits in tight spaces 2x FWD plus Full power REV Control ring power regulator Ergonomic Design Feather touch trigger Air pressure 90psi Free speed 7,100 rpm Noise: 80 db Weight: 1.85kg Transmission Bolts Alternator & AC Bolts Shackle Bolts No Skinned Knuckles MAGNUM 1/2" Mini Impact Gun 1/2 Drive Mini Impact Gun 500ft-lbs SUPER COMPACT - MAXIMUM POWER Max. torque 500ft-lbs (680 Nm) Max. pressure 90psi 1/2 Square drive Twin Hammer One handed Fwd/Rev control Full power Fwd & Rev. 3x Fwd & 3x Rev. settings Compact Size BIG POWER Rubberised grip Free speed 11,000 rpm Air consumption 4 cfm 1/4 PT Air inlet Weight: 1.42kg Noise: 95 db Tool length only 108mm MG-IG500M $ All prices include 10% GST Prices valid until 31st December 2017, E and OE All prices correct at time of printing and may be subject to change.

2 MAGNUM 1/2" Impact Gun As seen at SUPER COMPACT - MAXIMUM POWER Max. torque 500ft-lbs (680 Nm) Max. pressure 90psi 1/2 Square drive Twin Hammer One handed Fwd/Rev control Full power Fwd & Rev. 3x Fwd & 3x Rev. settings MAGNUM 1/2 Drive Mini Impact Gun 500ft-lbs MG-IG500M $ Rubberised grip Free speed 11,000 rpm Air consumption 4 cfm 1/4 PT Air inlet Weight: 1.42kg Noise: 95 db Tool length only 108mm NITRO 3/8" Pro Composite ENFORCER 1/2" Composite Gun THE ANVIL 1/2" Heavy Duty Max. torque 900ft-lbs (1220 Nm) Max. pressure 90psi 1/2 Square drive Twin Hammer One handed Fwd/Rev. Full power Fwd & Rev. 3x Forward settings Muffler also available separately. Part no. MG-HS50 Compact Size BIG POWER Nitro 3/8 Drive Professional 280ft-lbs 3/8" Professional Composite gun MG-IG380 $ ENFORCER THE ANVIL 1/2 Drive 1/2 Drive Composite Gun Heavy Duty Gun 900ft-lbs 550ft-lbs With Bonus MUFFLER MG-IG900 MG-IG550 $ $ Rubberised grip Composite construction Free speed 10,000 rpm Air consumption 4.8 cfm 1/4 PT Air inlet Weight: 1.95kg Noise: 95 db MG-MSK90 $ Free speed 15,000 rpm As seen at Noise: 80 db Air consumption 3 cfm Weight: 0.68kg Every workshop should have one! Clean off gaskets, Grind welding, Remove rust, Strip off paints, *Polishing of headlights and paints. Replacement surfacing discs, backing pads, clean & strip discs, polish sponges and backing pad conversion kits all available. *Polishing pad conversion kit required to use as a polisher. Polisher Conversion kit # MG-PPK75 Max. torque 280ft-lbs (380 Nm) Max. pressure 90psi Twin Hammer 3/8" Square drive Full power Fwd & Rev. 3x Fwd, 3x Rev. settings Rubberised grip Max. torque: 550ft-lbs (750 Nm) Max. pressure 90psi 1/2 Square drive Twin Hammer 6x Fwd & Rev. settings Full power Fwd & Rev. 90 Mini Sander Polisher 18pc Kit 0.5HP High Performance Motor, 50mm & 75mm, 1/2 Turn Lock 1x 90 Sander 1x 50mm Backing pad 1x 50mm Blue disc 2x 50mm Red disc 2x 50mm Yellow disc 1x Spindle adapter 2x Spanner 1x Blow moulded case 1x 75mm Backing pad 1x 75mm Blue disc 2x 75mm Red disc 2x 75mm Yellow disc 1x Nitto connector Composite construction Free speed 10,000 rpm Air consumption 3.7 cfm 1/4 PT Air inlet Weight: 1.2kg Noise: 95dBA Tool length 170mm Heavy Duty workshop gun Rubberised grip Heavy Duty construction Free speed 7000 rpm Air consumption 4.8 cfm 1/4 PT Air inlet Weight: 2.5kg 2 PTW TOOLS Spring 2017

3 1/4 Mini Air Ratchet MG-AR14MIN $ /8 Mini Air Ratchet / Driver MG-AR38MIN $ Torque: 22ft-lbs (30 Nm) Air pressure 90psi Free speed 300 rpm Air consumption 4.6 cfm 3/8" & 1/2 H/Duty Air Ratchets MG-AR38T (3/8" Drive) MG-AR12T (1/2" Drive) Noise: 90 db Weight: 0.46kg Length 125mm $ x Bonus Driver Bits Torque: 22ft-lbs (30 Nm) 1/4 Hex driver Air pressure 90psi Air consumption 4.6 cfm Free speed 300 rpm 3/8 & 1/2" Pro Impact Ratchets MG-AR38P (3/8" Drive) MG-AR12P (1/2" Drive) 5x Driver bits Noise: 90 db Weight: 0.46kg Length 125mm $ PAWL HEAD 3/8 or 1/2" Drive Torque: 90ft-lbs (120Nm) Max. pressure 90psi Air Consumption 7.1cfm Free speed 160 rpm Weight: 1.2kg Noise: 94dBA Length 230mm 3 Extended Ultra-Thin Cutter Ultra-Thin Cutting disc MG-CT75 $ Free speed 19,000 rpm Air consumption 2.05 cfm Noise: 86 db Weight: 0.76kg Length 310mm PAWL NO REACTION TORQUE 3/8 or 1/2" Hammer Drive Torque: 90ft-lbs (120Nm) Max. pressure 90psi Air Consumption 8.8cfm No smashed knuckles! Great for suspension work! Free speed 200 rpm Weight: 1.83kg Noise: 94dBA Length 327mm Ultra-Thin cutting discs available in packs of 10 Part No. MG-CD75/10 10mm Belt Sander (10x330mm) $ MG-BS10 Free speed 18,000 rpm Belt size: 10x330mm Air pressure 90psi Air consumption 2 cfm Noise: 83 db Weight: 0.8kg Length 275mm Zirconia replacement belts available in packs of 10. Grit sizes: P40, P60 & P80. See page 10 20mm Belt Sander (20x520mm) MG-BS20 Free speed 16,000 rpm Belt size: 20x520mm Air pressure 90psi Air consumption 3 cfm Noise: 891dBA Weight: 1.25kg Length 375mm Zirconia replacement belts available in packs of 10. Grit sizes: P40, P60 & P80. See page 10 $ All prices include 10% GST 3

4 Professional Stripping Tool Kit 0.5HP Motor, 5x Eraser / Stripping Wheels 1x Professional stripping tool 1x Straight tip wheel, wire Ø 0.5mm 1x Flared tip wheel, wire Ø 0.5mm 1x Flared tip wheel, wire Ø 0.7mm 1x Rubber eraser wheel 1x Rip & Strip wheel 1x Wire wheel adapter 1x Blow moulded case 1x Hex key Free speed 4000 rpm 180 Rotational handle Air consumption 3.6 cfm Noise: 81 db Weight: 1.2kg Length 250mm MG-ST100 $ Die Grinder 18pc Kit 1/4 & 1/8 Collet Sizes Now with 2x Carbide Burrs Valued over $ /4" Carbide Burr Sets $ pc Set 1/2" x 1" 1/4" x 5/8" 1/4" 3/8" 1/2" x 1" MG-DG100B 1x Die Grinder & Case 1x 1/8 Collet 1x 1/4 Collet 2x 1/4" Carbide Burrs 5x 1/8 Grinding stones 5x 1/4 Grinding stones 1x Connector & Spanner set $ MG-CBS8 4pc 150mm Extended Shaft 1/2" x 1" 3/8" Free speed 25,000 rpm Noise: 82 db Air consumption 3.5 cfm Weight: 0.4kg Length 155mm MG-CBS4L Polish Pad 4pc Kit (1/2 Turn Lock) Converts 90 Mini Sander into a polisher! 1x 75mm Backing Pad 1x 75mm Sponge White/Soft 1x 75mm Sponge Yellow/Firm 1x 75mm Wool Pad MG-PPK75 (Tree) Carbide Burr (Tree)Carbide Burr (Cone) Carbide Burr (Cone) Carbide Burr (Ball) Carbide Burr (Ball) Carbide Burr (Cylinder) Carbide Burr (Cylinder) Carbide Burr (Tree) Carbide Burr (Tree)Carbide Burr (Cone) Carbide Burr (Ball) Carbide Burr $ Nitrile Gloves STRETCH Nitrile Gloves Workshop Tough Hypoallergenic Powder Free, Latex Free Low-Sweat Technology Puncture Resistant OHS Approved Pack of 100pcs BLUE NG2-M Medium NG2-L Large NG2-XL X-Large BLACK NG3-M Medium NG3-L Large NG3-XL X-Large $21.00pk $38.00 Headlight Lens Restoration Kit Professional Lens Restoration Kit Part #060 $66.00 Replacement polishes and pads also available 4 PTW TOOLS Spring 2017 As seen at Enough to restore over 20 pairs of headlights! Kit 1x 8oz Perfect Cut Polish 1x 2oz Replenish Wax/Sealer 1x 3" Backing Pad with Arbor 1x 3" Polish Sponge 1x 3" Wool Pad 1x Sandpaper 1x Microfibre Towel 1x Set of Instructions Made in USA

5 2 Mini Orbital Sander/Polisher 2 Mini Orbital Oscillating Sander/Polisher MG-90MOSB $ Random Orbital Sander 3 Random Orbital Oscillating Sander MG-OS75 $ x Mini Sander/Polisher 1x 50mm Pad 1x Wool polish pad 1x Soft sponge pad 1x Firm sponge pad ORBIT ORBIT 2.5mm Orbit Air pressure 90psi Free speed 14,000 rpm Noise: 87 db Air consumption 4 cfm Tool length 140mm Weight: 0.7kg Magnetic Glove Box Holder 3 Hole,Hook & Loop pad 2.5mm Orbit Air pressure 90psi Vacuum dust extraction Free speed 11,000 rpm Noise: 80 db Air consumption 2.25 cfm Weight:0.8kg 6 6 Random Orbital Sanders MG-MH02 $ MG-OSHE25 2.5mm Orbit MG-OSHE50 5.0mm Orbit $ ORBIT ORBIT Super strong magnets allow for easy placement in almost any location. Keeps shelves and benches tidy! 15kg Magnetic Gun Holder $48.00 MG-MH01 Hooks for popular sockets and drivers Hook & Loop 52 Hole pad 2.5mm or 5.0mm Orbit Air pressure 90psi Vacuum dust extraction Free speed 11,000 rpm Noise: 80 db Air consumption 2.25 cfm Weight: 0.85kg 3 & 6 Interface Pads Hook & Loop Interface Pads 90 Mini Geared Polisher 3 High Torque Geared Polisher MG-MP90 As seen at 3 $ mm Pad Air pressure 90psi Free speed 2,200 rpm Noise: 84 db Air consumption 3.5 cfm Spindle thread 5/16-24T 0.45HP Geared motor Tool length 135mm Weight: 0.77kg 6 Interface Pad 3 Interface Pad MG-IP6 $12.00 MG-IP3 Provides a softer and more even interface between hard backing pads and your work. Helps prevent flat spotting on contours and edges. Speedfile Hand Block Multi-Hole Hand Sanders with dust extraction 70 x 440mm Speedfile MG-SB02 All prices include 10% GST $

6 DNA Dry Flake Gun Shoot dry flakes onto a wet Clearcoat 1x Flake Gun 2x Dry flake jars 1x Intergrated regulator FG100 $ New Design Manufactured by: Stripping Tool Wheels MG-WE4 Eraser Wheel Ø105mm x 22mm For the removal of pinstripe, decals, stickers and adhesive backings from moulds and badges MG-WS4 Strip Wheel Ø105 x 22mm Strip and prepare panels removing paint, resins and undercoats 6 Flaked by: Ryan Ford Gravity Spray Guns PTW TOOLS Spring 2017 Touch Up / Virtual Chrome Gun 0.8mm Nozzle 125ml Cup SG08 $ Basecoat & Clearcoat Gun 1.2mm Nozzle 600ml Cup SG12 Black Nylon Spraysuit DNA $ DNA Custom Black Nylon Overalls Black Anti-static treated washable nylon High quality 2-Way zip with vented back Boot zippers, chest and rear pockets Wide elastic cuffs and waist DNA Custom Paints screen printed SBN-S Small SBN-M Medium SBN-L Large SBN-XL XLarge SBN-XXL 2-XLarge Carbon Fibre Spraysuit DNA $39.00 DNA Custom Carbon Fibre Overalls Black Anti-static with 1% Carbon Fibre for rapid static dispersion High quality 2-Way zip with vented back Boot zippers, chest and rear pockets Wide elastic cuffs and waist DNA Custom Paints screen printed Custom Black/Charcoal Two-Tone design SCF-S Small SCF-M Medium SCF-L Large SCF-XL X-Large SCF-XXL 2-XLarge SCF-XXXL 3-XLarge $55.00 Zirconia Sanding Belts MG-WW7F Flared Tip Wire Wheel (Coarse) 22mm Ø105 x 22mm, Wire gauge 0.7mm Remove rust, paint, seam sealer and primers back to bare metal MG-WW5F Flared Tip Wire Wheel (Fine) 22mm Ø105 x 22mm, Wire gauge 0.5mm Remove rust, paint, seam sealer and primers back to bare metal Part No: MG-WW4F Flared Tip Wire Wheel (Fine) 11mm Ø105 x 11mm, Wire gauge 0.5mm Remove rust, paint, seam sealer and primers back to bare metal MG-WW5S Straight Tip Wire Wheel (Fine) 22mm Ø105 x 22mm, Wire gauge 0.5mm Remove rust, paint, seam sealer and primers back to bare metal MG-WA11 Wheel Adapter 11mm 11mm Wheel Adapter Suits MG-ST-100 Stripping Tool MG-WA22 Wheel Adapter 22mm 22mm Wheel Adapter Suits MG-ST-100 Stripping Tool 10mm x 330mm Zirconia Belts MG-B1040 P40 Belts (10pk) MG-B1060 P60 Belts (10pk) MG-B1080 P80 Belts (10pk) Suitable for Belt Sander #MG-BS10 20mm x 520mm Zirconia Belts MG-B2040 P40 Belts (10pk) $25.50 MG-B2060 P60 Belts (10pk) $25.50 MG-B2080 P80 Belts (10pk) $25.50 Suitable for Belt Sander #MG-BS20 Abrasive Paper Discs (Hook & Loop) $ mm Paper Sanding Discs MG-SP P1200 Disc (50pk) $39.50 MG-SP P1500 Disc (50pk) $39.50 MG-SP P2000 Disc (50pk) $39.50 For use on 2 Mini Orbital Sander #MG-90MOSB or 50mm Waterfed De-Nibbing hand pad # MG-BP02

7 Surfacing Discs Ultra-Thin Cutting Discs (1/2 Turn Lock) $22.50 MG-CD75/10 Blue/Fine Surfacing Discs MG-DB50/10 MG-DB50/50 50mm (10 Pack) 50mm (50 Pack) $79.00 MG-DB75/5 MG-DB75/50 75mm (5 Pack) 75mm (50 Pack) $15.00 $ Red/Medium Surfacing Discs MG-DR50/10 MG-DR50/50 50mm (10 Pack) 50mm (50 Pack) $79.00 MG-DR75/5 MG-DR75/50 75mm (5 Pack) 75mm (50 Pack) $15.00 $ Ultra-Thin Cutting Discs - Value Pack Ø75x1.2x10mm Pack of 10 discs Suitable for use on Extended cutters MG-CT75 & MG-CT75HD Backing Pads MG-DY50/10 MG-DY50/50 50mm (10 Pack) 50mm (50 Pack) $79.00 MG-DY75/5 MG-DY75/50 75mm (5 Pack) 75mm (50 Pack) $15.00 $ Surfacing Disc Kit - 45pc MG-DKIT $99.00 $12.95 MG-BP50 2 /50mm M6 Suitable for #MG-90MOSB polisher Yellow/Coarse Surfacing Discs 10x 50mm Blue 10x 50mm Red 10x 50mm Yellow (75mm) $16.00 MG-BP75 3 /75mm M6 Suitable for #MG-90MOSB polisher $19.90 MG-OS75BP 3 /75mm 5x 75mm Blue 5x 75mm Red 5x 75mm Yellow 5/16 " Suitable for #MG-OS75 3 Orbital Sander MG-SB03 Conditioning Balls (6mm Shank) 50mm Conditioning Balls 6 /150mm MG-BB50 MG-BR50 MG-BY50 Blue/Fine Ball Red/Medium Ball Yellow/Coarse Ball* MG-BB75 MG-BR75 MG-BY75 Blue/Fine Ball Red/Medium Ball Yellow/Coarse Ball* $14.50 $14.50 $ mm Conditioning Balls 5/16 Suitable for #MG-OSHE50 & #MG-OSHE25 X-Mesh High Efficiency Orbital Sanders $12.95 MG-BP02 2 /50mm N/A Waterfed Hand Backing Pad Clean & Strip (1/2 Turn Lock & Wheel) MG-SD50/5 50mm Disc (5pk) MG-SD75/5 75mm Disc (5pk) MG-SD75/25 75mm Disc (25pk) $14.00 MG-PBP75 50mm & 75mm Clean & Strip Discs 3 /75mm $24.50 $34.50 $ /2 Turn Suitable for 1/2 Turn backing pads, backing pad #MG-RP75 & Mini Sander #MG-MSK90 Suitable for Mini Sander #MG-MSK90 105mm Stripping Wheel MG-WS4 105mm Wheel Suitable for Stripping Tool #MG-ST100 Zirconia Discs 2 /50mm 1/4 1/2 Turn MG-RP75 Rubber Pad Zirconia Sanding Discs MG-SP50Z40 MG-SP50Z60 MG-SP50Z80 MG-SP50Z120 50mm P40 (10pk) 50mm P60 (10pk) 50mm P80 (10pk) 50mm P120 (10pk) MG-SP75Z40 MG-SP75Z60 MG-SP75Z80 MG-SP75Z120 75mm P40 (10pk) 75mm P60 (10pk) 75mm P80 (10pk) 75mm P120 (10pk) $19.50 $19.50 $19.50 $ /75mm 10x 50mm P120 5x 50mm Strip Disc /SHANK 1/4 1/2 Turn Suitable for Mini Sander #MG-MSK90 plus all PTW Air Drills & Die Grinders. Includes 1/4 Arbor. Eraser Pads MG-EPK4 Eraser Kit 50mm Zirconia Disc Kit - 45pc $89.00 MG-DK50 15x85mm 5/16 3 Polish Sponges & Pads 75mm Zirconia Disc Kit - 45pc MG-DK75 $ x 75mm P40 10x 75mm P60 10x 75mm P80 /SHANK Suitable for Mini Sander #MG-MSK90 plus all PTW Air Drills & Die Grinders. Includes 1/4 Arbor. (1/2 Turn Lock) 10x 50mm P40 10x 50mm P60 10x 50mm P80 $9.50 MG-RP50 Rubber Pad 10x 75mm P120 5x 75mm Strip Disc $14.50 Arbor 6mm 3 75mm Hook & Loop MG-SWY75 MG-SWW75 MG-DB50/50 Sponge Yellow/Soft Sponge White/Firm Wool Pad $6.95 $6.95 Suits Mini Polishers MG-90MOSB & MG-MP90 All prices include 10% GST 7

8 Anti-Whip Hose & Mufflers MG-HS50 $22.90 Muffler/Silencer - Anti-Vibration Hose 1/4 PT, Muffler with Nitto style male connector. Fits all PTW impact guns. MG-HV10 $12.95 Anti-Vibration Hose 1/4 PT with Nitto style male connector, Hose ID: 10mm Protects air fittings from harsh impact gun & air hammer vibrations Air Tool Oil MG-OIL Air tool oil 15ml bottle of quality air tool oil Handy size for every toolbox Oiling tools daily helps remove damaging moisture from your tools! $2.20 a. b. c. d. e. f. Nitto Style One -Touch Connectors MG-FB38 Female coupler with Male barb 3/8 Suitable for 3/8 and 10mm I.D. hose EOQ: 5pcs MG-FMT14 Female coupler with Male thread 1/4 PT EOQ: 5pcs MG-FFT14 Female coupler with Female thread 1/4 PT EOQ: 5pcs MG-MB38 Male connector with Male barb 3/8 Suitable for 3/8 and 10mm I.D. hose EOQ: 10pcs $2.90 MG-MMT14 $2.90 Male connector with Male thread 1/4 PT EOQ: 10pcs MG-MFT14 $2.90 Male connector with Female thread 1/4 PT EOQ: 10pcs a. b. Clamps & Clamping Tools c. d. e. f. a. CVT-15 Ear Type CV Clamp tool with cutter $38.00 b. RS290 Tension banding tool with cutter $59.00 c. CVC-S CV Clamp - Ear type (Small) $1.65 d. CVC-L CV Clamp - Ear type (Large) $1.65 e.hc-10 Ear hose clamps to suit 10mm ID hose 10pk $5.50 f. CVCLIPS CV Clamp - Tension type (Pair Small & Large) $3.30 Air Regulators & Filter Regulators MG-MAR In-line Mini Air Regulator 1/4 PT Fully adjustable thumb size air regulator. 1/4 Air Regulator MG-R01 $38.00 Max Temp. 60 C Max. Input: 240psi Max Output: 210psi Air Inlet/Outlet: 1/4 Gauge Port: 1/8 Fully adjustable and locking pressure control 1/4 Air Filter Regulator MG-FR01 $48.00 Max Temp. 60 C Max. Input: 240psi Max Output: 210psi Air Inlet/Outlet: 1/4 Gauge Port: 1/8 Available from: PTW Tools Head Office 5-7 Keith Campbell Crt, Scoresby, Victoria, 3179 Australia p: e: info@productsthatwork.com.au 12 Month Warranty - PTW Tools are covered by a 12 month return to base warranty All prices correct at time of printing and may be subject to change. Copyright 2017 All rights reserved. Reproduction in whole or part is prohibited. All images, trademarks, designs and logos are protected and should not be used, copied or imitated in any way. Products That Work Pty Ltd.