DIESEL DIESEL PARTS & SERVICE.

Transcription

1 DIESEL DIESEL PARTS & SERVICE

2 HATZ DIESEL ENGINE RANGE The B-Series Flexible solution for all areas The Hatz B series scores high marks in mobile and stationary operation with compact installation dimensions and in all applications with a power requirement up to 8 kw due to its low weight. Also in regard to robustness and lifetime, the series sets standards in the market. Whether on vibration plates or in the inhospitable environment of the Antarctic, the B- series has been tried and tested a hundred thousand times in harsh surroundings. D-Series Revolutionary technology in single cylinder The Hatz D series is best suited for challenging tasks. It is characterized by high power and the unique design in particular. Thus, with 11.2 kw, the 1D90 engine is the highest performance single-cylinder diesel engine in the world. A compensation weight on the flywheel side crank arm as well as balance weights cast in the flywheel ensure the special quiet running of the D series. Optionally available counter-rotating balance shafts even ensure 100% 1st-order counter balance G-Series The two cylinder power package As our customers confirm, Hatz diesel engines are the most robust and durable in this market segment. It doesn't matter where they are used; whether at very low temperatures or in a tropical climate, the Hatz 2G40 carries out its job reliably. With regular maintenance, many thousands of hours are commonplace, using HATZ original spare parts, of course. M-Series Ready to use all the time The M-Series is the mainstay among industrial diesel engines. The 2, 3 and 4-cylinder engines have been successfully established on the market for around 30 years and they are still regarded as unbeatable. The robust basic drive train, notably the sturdiest crankshaft of all engines on the market, has remained unchanged since the market introduction. Thus running times of several ten thousand hours are no problem for the M-Series engines L-Series Economic, operationally safe, quiet Hatz L-Series Silent Pack Industrial s are available in 2,3 and 4-cylinder configuration with German Designed, Engineered and Factory fitted Engine encapsulation reducing radiated noise emission by 90%. The capsule consists of sheet metal with structure-borne sound insulation that is mounted on the engine. All control and service points are accessible without removing any covers. Hatz Silent Pack Engines - like all other Hatz engines offer extremely long service life is attributed to the robust design. The cooling air circulation and high operation safety enable L-Series engines to be operated reliably in remote areas or for applications without constant monitoring. H-Series Since beginning of 2014 a new engine family extends the Hatz product portfolio: The H-series. Starting with the 4H50TIC water-cooled 4-cylinder model, Hatz is relying on common-rail technology and turbocharger with the new generation. Hatz followed a ground-breaking downsizing approach, making the engine the most compact and lightweight in its class. The H series does not require a diesel particulate filter ( DPF) in order to fulfil the stringent emissions regulation Stage III B in the EU and EPA Tier 4 final in the US. For more information on the Hatz engine range go to our web site on or contact us on

3 Continuous Horsepower Rating Model Cyl B B B B D42Z D50Z D81Z D90Z G M M41Z M M41Z M M41Z Silent Pack Engines Model Cyl D42C D81C L41C L41C L41C ALL RATINGS ARE CONTINUOUS HP TO ISO3046-ICXN/ICFN AT STANDARD CONDITIONS DERATING APPLIES FOR TEMPERATURE ABOVE 25 C AND ALTITUDE ABOVE 100 METERS

4 1B20 Bore and stroke...69 x 62 mm Displacement...232cc Fuel tank capacity...3 litres Dry weight recoil start kg Dry weight electric start kg B40 Bore and stroke...88 x 76 mm Displacement...462cc Fuel tank capacity... 5 litres Dry weight recoil start kg Dry weight electric start kg B30 Bore and stroke...80 x 69 mm Displacement...347cc Fuel tank capacity...5 litres Dry weight recoil start kg Dry weight electric start kg B50 Bore and stroke...93 x 76 mm Displacement...517cc Fuel tank capacity...5 litres Dry weight recoil start kg Dry weight electric start kg Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions

5 1B20V Vertical Shaft Bore and stroke...69 x 65 mm Displacement...243cc Fuel tank capacity...3 litres Dry weight recoil start kg Dry weight electric start kg B40V Vertical Shaft Bore and stroke...88 x 76 mm Displacement...462cc Fuel tank capacity...5 litres Dry weight electric start... 64kg B30V Vertical Shaft Number of cylinders.... Bore and stroke...80 x 69 mm Displacement...347cc Fuel tank capacity...5 litres Dry weight recoil start kg Dry weight electric start kg B50V Vertical Shaft Bore and stroke...93 x 76 mm Displacement...517cc Fuel tank capacity...5 litres Dry weight recoil start kg Dry weight electric start kg Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions

6 1D42Z Number of cylinders.... Bore and stroke...90 x 72 mm Displacement...445cc Fuel tank capacity...7 litres Dry weight recoil start kg Dry weight electric start kg D81Z Bore and stroke x 85 mm Displacement...667cc Fuel tank capacity...10 litres Dry weight recoil start kg Dry weight electric start kg D50Z Bore and stroke...97 x 70 mm Displacement...517cc Fuel tank capacity...7 litres Dry weight recoil start kg Dry weight electric start kg D90Z Bore and stroke x 85 mm Displacement...722cc Fuel tank capacity...10 litres Dry weight electric start kg Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions

7 1D90V Vertical Shaft Bore and stroke x 85 mm Displacement...722cc Fuel tank capacity...5 litres Dry weight electric start kg M41Z Number of cylinders....2 Bore and stroke x 105 mm Displacement cc Dry weight kg G40 Number of cylinders....2 Bore and stroke...92 x 75 mm Displacement...997cc Fuel tank capacity...7 litres Dry weight electric start kg M41Z Number of cylinders....3 Bore and stroke x 105 mm Displacement cc Dry weight kg Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions

8 4M41Z Number of cylinders....4 Bore and stroke x 105 mm Displacement cc Dry weight kg D81C SILENT PACK Bore and stroke x 85 mm Displacement...667cc Dry weight kg D42C SILENT PACK Number of cylinders....2 Bore and stroke...90 x 70 mm Displacement...445cc Dry weight electric start kg L41C SILENT PACK Number of cylinders....2 Bore and stroke x 105 mm Displacement cc Dry weight kg Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions

9 3L41C SILENT PACK Number of cylinders....3 Bore and stroke x 105 mm Displacement cc Dry weight kg H50TI Water-cooled Number of cylinders....4 Bore and stroke...84 x 88 mm Displacement cc Cooling system...water cooled Dry weight kg L41C SILENT PACK Number of cylinders....3 Bore and stroke x 105 mm Displacement cc Dry weight kg H50TIC Water Cooled Exhaust emission after treatment...egr, DOC Number of cylinders....4 Bore and stroke...84 x 88 mm Displacement cc Cooling system...water cooled Dry weight kg Low Noise Low Maintenance Compact Durable and reliable Fuel efficient Harsh Conditions

10 ENGINE OPTIONS and ACCESSORIES 1B SERIES Stub Shaft Options Part number Description ¾ tapered generator shaft #6 Ital tapered shaft ¾ parallel shaft ¾ threaded pump shaft mm parallel shaft /8 threaded shaft /8 parallel shaft Raw 26.8mm stub shaft threaded pump shaft parallel shaft /8 tapered generator shaft mm parallel shaft mm tapered shaft Blank 31.8 DIA shaft un-machined Adaptor Housing Options SAE J609A (41.5mm DIA) SAE J609b (146.1mm DIA) ENGINE OPTIONS and ACCESSORIES 2G SERIES Stub Shaft Options Part number Description mm parallel shaft Adaptor Housing Options SAE5 housing PTO Flange SAE6.5 Silent Pack Units ENGINE OPTIONS and ACCESSORIES 1D SERIES Stub Shaft Options Part number Description PTO bearing side load kit mm parallel shaft parallel shaft taper shaft (genset) Flexible coupling Adaptor Housing Options SAE B housing 1D Semi machined housing SAE J609B (146.1mm DIA) 1D SAE5 housing ENGINE OPTIONS and ACCESSORIES L & M SERIES Stub Shaft Options Part number Description mm parallel shaft PTO bearing side load kit mm noise proof stub shaft Flexible coupling Adaptor Housing Options Heavy flywheel SAE 3/ SAE5/5 spacer SAE4 housing SAE3 housing ADDITIONAL EQUIPMENT Part number Description Tacho-hour meter hour count down timer Hour meter 12V Hour meter 24V Loss of prime with over-ride push button litre fuel tank litre fuel tank litre fuel tank Fuel tank console to suit 35 litre tank Fuel tank console to suit 60 & 100 litre tank Fuel line kit 2 meters mm ID supply line per meter mm ID return line per meter mm fuel line per meter n/a Engine protection on B series n/a 24V starting and charging system upgrade n/a Auto-start facility via 2 wire remote start n/a Auto-start facility via 7 day programmable time clock start

11 ENGINE WARRANTY POLICY The Australian warranty on Hatz diesel engines is 24 months from the date of first sale to an "end user" Warranty covers faulty workmanship and materials, and covers the cost of parts, labor (during normal working hours), engine removal and replacement (where necessary), travelling to the site or freight to us, at our option (freight covers overland economy road only, travelling covers up to 250 km round trip by road overland only). This warranty applies to new engines sold in Australia as well as engines imported into Australia on new equipment (engines imported on new equipment must be less than 28 months old, from ex-factory build date). Warranty work should be arranged through Hatz Australia Pty Ltd, one of our Authorized Service Dealers or the original equipment supplier. Warranty applies to the complete engine including parts and accessories supplied by Hatz as original equipment. Warranty does not cover normal wear and tear, corrosion, and operation at low load ("glazing") or overload/over speed, failures resulting from improper installation, inadequate maintenance, long-term) storage, harsh environmental conditions or the use of non-genuine replacement parts. Parts replaced under warranty become the property of Hatz Australia Pty Ltd. Warranty does not cover loss of income or consequential damage unless provided for under Australian Federal or State Law. In certain circumstances a pro-rata warranty may be applied where engine running hours exceed 2,000 hours. While no warranty registration card needs to be completed to qualify for warranty, under certain circumstances, we may require evidence to substantiate purchase date, operating hours and routine maintenance and service dates. The above warranty is in addition to all other rights and remedies existing under Australian Federal and State Law. Terms Prices are ex our works Brisbane. Diesel Parts and Service Pty. Ltd. (A.C.N ) reserves the right to change specifications, pricing or availability without prior notice, or incurring liability of any kind. Listed retail prices are offered as a guide only, and technical details must be confirmed where safety and performance are critical. Prices and specifications are subject to change without notice, and sales are subject to our Conditions of Sales, available on request. E.& O.E.

12 Diesel Parts & Service Phone: