HS 29. ELITE SERIES SEER up to to 5 Tons Cooling Capacity 12,000 to 62,500 Btuh Bulletin No October 2004 Supersedes September 2003

Transcription

1 ENGINEERING DATA AIR CONDITIONERS HS29 ELITE SERIES SEER up to to 5 Tons 12,000 to 62,500 Btuh Bulletin No October 2004 Supersedes September 2003 Direct Drive Fan Lanced Aluminum Fins Heavy Duty, Louvered Steel Fan Guard Heavy Gauge Steel Cabinet with Powder Paint Finish Enhanced PVC Coated Coil Guard Copeland Scroll ressor Copper Tube Outdoor Coil Brass Service Valves MODEL NUMBER IDENTIFICATION HS P Unit Type HS = High Side Conditioner Series Nominal 012 = 1 ton (3.5 ) 018 = 1.5 tons (5.3 ) 024 = 2 tons (7.0 ) 030 = 2.5 tons (8.8 ) 036 = 3 tons (10.6 ) 042 = 3.5 tons (12.3 ) 048 = 4 tons (14.1 ) 060 = 5 tons (17.6 ) 062 = 5+ tons (17.6+ ) Voltage P = 208/230V 1 phase 60hz Y = 208/230V-3 phase-60hz G = 460V-3 phase-60hz J = 575V-3 phase-60hz Minor Revision Number FEATURES CONTENTS ARI Rating Tables Pages 8 17 Dimensions Page 7 Expanded Ratings Pages Features Pages 1 3 Field Wiring Page 6 Installation Clearances Page 7 Model Number Identification Page 1 Optional Accessories Page 6 Outdoor Sound Data Page 3 Specifications Pages 4 5 Warranty ressor Ten year limited warranty in residential applications, five year limited warranty in non residential applications. All other covered components Five year limited warranty in residential applications, one year limited warranty in non residential applications. Refer to Lennox Equipment Limited Warranty certificate included with unit for specific details. Visit us at For the latest technical information, NOTE Due to Lennox ongoing committment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury. Installation and service must be performed by a qualified installer and servicing agency Lennox Industries Inc.

2 FEATURES Application SEER up to through 5+ ton (3.5 through ) matches with TXV or RFC. Single or three phase power supply. Vertical air discharge allows concealment behind shrubs at grade level or out of sight on a roof. Matching add on furnace indoor coils or air handlers provide a wide range of cooling capacities and applications. See ARI Ratings table. For indoor unit data, see and Handlers sections. Units shipped completely factory assembled, piped and wired. Each unit is test operated at the factory ensuring proper operation. Installer must set air conditioning unit, connect refrigerant lines and make electrical connections to complete job. Approvals Certified in accordance with the USE certification program, which is based on ARI Standard 210/ Sound rated in Lennox reverberant sound test room in accordance with test conditions included in ARI Standard Tested in the Lennox Research Laboratory environmental test room. Rated according to US Department of Energy (DOE) test procedures and approved rating methods. Conditioning units and components within bonded for grounding to meet safety standards for servicing required by UL, NEC and CEC. Units are UL and ULC listed. Energy rating verified by CSA. ISO 9001 Registered Manufacturing Quality System. REFRIGERATION SYSTEM Refrigerant Flow Control Units applicable to expansion valve systems or RFC systems when matched with specific evaporator coils. RFCIV: Accurately meters refrigerant in system. Refrigerant control is accomplished by exact sizing of refrigerant metering orifice. The principle involves matching evaporator coil with proper bore size of orifice in metering device. O RING RFCIV METERING SYSTEM ORIFICE BODY (On Coil) LIQUID LINE SCREEN SEAL NUT RFCIV BULLET" ORIFICE LIQUID LINE SWEAT CONNECTION Equalizes pressure shortly after compressor stops, unit starts unloaded, eliminating need for additional controls. Furnished with air conditioning unit. Copper Tube/Enhanced Fin Coil Lennox designed and fabricated coil. Ripple edged aluminum fins. Copper tube construction. Lanced fins provide maximum exposure of fin surface to air stream resulting in excellent heat transfer. Fin collars grip tubing for maximum contact area. Flared shoulder tubing connections/silver soldering construction. Coil is factory tested under high pressure to insure leakproof construction. Entire coil is accessible for cleaning. PVC coated steel wire coil guard furnished as standard. Outdoor Fan Direct drive fan moves large air volumes uniformly through entire outdoor coil for high refrigerant cooling capacity. Vertical air discharge minimizes operating sounds and eliminates damage to lawn and shrubs. Fan motor has sleeve bearings and is inherently protected. totally enclosed for maximum protection from weather, dust and corrosion. Rain shield on motor provides additional protection from moisture. Louvered steel top fan guard furnished as standard. Fan service access accomplished by removal of top panel. OPTIONS Expansion Valve Kits (Expansion Valve Systems) Must be ordered extra and field installed on certain evaporator units. See ARI Ratings table. High Pressure Switch Kit Protects the system from high pressure conditions that can be a result of fan failure or a blocked/dirty coil. Manual reset. Loss of Charge Kit Helps protect the compressor from damage due to a loss of refrigerant charge. SPST, normally closed switch, automatic reset. Refrigerant Line Kits Refrigerant lines (suction & liquid) are shipped refrigeration clean. Lines are cleaned, dried, pressurized and sealed at factory. Suction line fully insulated. L15 lines are stubbed at both ends. Kits are not available for HS models and must be field fabricated. Cabinet Heavy gauge steel cabinet with five station metal wash process. Powder paint finish provides superior rust and corrosion protection. Painted base section. Control box is conveniently located with all controls factory wired. Corner patch plate allows access to compressor. Drainage holes are provided in base section for moisture removal. Refrigerant Line Connections, Electrical Inlets, Service Valves Sweat connection suction and liquid lines are located on corner of unit cabinet. Fully serviceable brass service valves prevent corrosion and provide access to refrigerant system. Suction valve can be fully shut off, while liquid valve may be front seated to manage refrigerant charge while servicing system. 45 elbow furnished for ease of suction line connection. HS models are stubbed with 3/8 in. (9.5 mm) liquid line connection. 3/8 in. x 5/16 in. (9.5 mm x 7.9 mm) reducer bushing furnished for liquid line connection. Refrigerant line connections and field wiring inlets are located in one central area of cabinet for easy access. See dimension drawing. OPTIONS Hail Guards Constructed of louvered heavy gauge steel painted to match cabinet. Surrounds unit on all four sides to prevent damage to the coil. Mounting Base High density polyethylene mounting base is lightweight, sturdy, sound absorbing and will withstand the effects of sun, heat, cold, moisture, oil and refrigerant. Provides permanent foundation for air conditioning units. 22 1/4 x 22 1/4 x 3 in. (565 x 565 x 76 mm) shipping weight 6 lbs. (3 kg) each. Unit Stand Off Kit Black high density polyethylene feet are available to raise unit off of mounting surface away from damaging moisture. Four feet are furnished per order number. HS29 / Page 2

3 FEATURES COMPRESSOR Reciprocating ressor (HS , 1 phase models and HS29 036, 3 phase models) Designed for dependable efficiency with minimum operating cost. Suction cooled and overload protected with internal pressure relief. Hermetically sealed with built in protection from excessive current and temperatures. Crankcase heater assures proper compressor lubrication (three phase models only). Running gear assembly resiliently suspended internally inside case. ressor installed in unit on resilient rubber mounts assuring low sound and vibration free operation. HS model equipped with rotary compressor HS phase models have an internal crankcase heater. Copeland Scroll ressor (HS thru 060, 1 phase models and HS thru 062, 3 phase models) ressor features high efficiency with uniform suction flow, constant discharge flow and high volumetric efficiency and quiet operation. ressor consists of two involute spiral scrolls matched together to generate a series of crescent shaped gas pockets between them. During compression, one scroll remains stationary while the other scroll orbits around it. Gas is drawn into the outer pocket, the pocket is sealed as the scroll rotates. As the spiral movement continues, gas pockets are pushed to the center of the scrolls. between the pockets is simultaneously reduced. When pocket reaches the center, gas is now at high pressure and is forced out of a port located in the center of the fixed scrolls. During compression, several pockets are compressed simultaneously resulting in a smooth continuous compression cycle. Continuous flank contact, maintained by centrifugal force, minimizes gas leakage and maximizes efficiency. Scroll compressor is tolerant to the effects of slugging and contaminants. If this occurs, scrolls separate, allowing liquid or contaminants to to be worked toward the center and discharged. Low gas pulses during compression reduces operational sound levels. ressor motor is internally protected from excessive current and temperature. ressor is installed in the unit on resilient rubber mounts for vibration free operation. Start Controls Furnished on HS and 018 models. Provides assistance for compressor start under loaded conditions or in case of low voltage. OPTIONS ressor Low Ambient Cut Out Non-adjustable switch (low ambient cut-out) prevents compressor operation when outdoor temperature is below 35 F (2 C). Crankcase Heater Crankcase heater prevents migration of liquid refrigerant into compressor and ensures proper compressor lubrication. Not available for HS phase models. ressor Hard Start Kit Single phase units are equipped with a PSC compressor motor. This type of motor normally doesn t need a potential relay and start capacitor. In applications where compressor is required to start when discharge and suction pressures have not equalized or under low voltage conditions, kit may be required to increase compressor starting torque. ressor Sound Cover A reinforced vinyl compressor cover containing a 1 1/2 inch (38.1 mm) thick batt of fiberglass insulation. All open edges are sealed with a one inch wide hook and loop fastening tape. CONTROLS OPTIONS Freezestat Installs on or near the discharge line of the evaporator or on the suction line. Senses suction line temperature and cycles the compressor off when suction line temperature falls below it s setpoint. Opens at 29 F ( 2 C) and closes at 58 F (14 C). Low Ambient Kit (Expansion Valve Systems Only) conditioning units operate satisfactorily down to 45 F (7 C) outdoor air temperature without any additional controls. Low Ambient Control Kit can be field installed, allowing unit operation down to 30 F ( 1 C). Thermostat Thermostat not furnished with unit. See Thermostats bulletin in the Controls tab \section and Lennox Price Book. Timed Off Control Prevents compressor short cycling and allows time for suction and discharge pressure to equalize. Permits compressor start up in an unloaded condition. Automatic reset with 5 minute delay between compressor shut off and start up. OUTDOOR SOUND DATA Octave Band Sound Power Levels dba, re Watts 1 Sound Rating Number Number (db) HS N/A N/A N/A N/A N/A N/A N/A 74 HS HS HS HS HS HS HS NOTE the octave sound power data does not include tonal correction. 1 Tested according to ARI Standard test conditions. HS29 / Page 3

4 SPECIFICATIONS 1 PHASE Data Model No. HS HS HS HS Nominal Tonnage () 1 (3.5) 1.5 (5.3) 2 (7.0) 2.5 (8.8) 1 Sound Rating Number (db) Connections Liquid line o.d. in. (mm) 2 3/8 (9.5) 2 3/8 (9.5) 2 3/8 (9.5) 2 3/8 (9.5) (sweat) Suction line o.d. in. (mm) 5/8 (15.9) 5/8 (15.9) 3/4 (19.1) 3/4 (19.1) 3 Refrigerant (HCFC-22) furnished 2 lbs. 10 oz. (1.19 kg) 3 lbs. 12 oz. (1.70 kg) 3 lbs. 10 oz. (1.64 kg) 4 lbs. 1 oz. (1.84 kg) Outdoor Net face area sq. ft. (m 2 ) Outer 7.56 (0.70) (1.05) (1.05) (1.23) Coil Tube diameter in. (mm) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) No. of rows Fins per inch (m) 22 (866) 22 (866) 22 (866) 18 (748) Outdoor Diameter in. (mm) & no. of blades 18 (457) 3 18 (457) 3 18 (457) 3 18 (457) 3 Fan hp (W) 1/6 (124) 1/6 (124) 1/6 (124) 1/6 (124) Cfm () 2400 (1135) 2400 (1135) 2400 (1135) 2454 (1200) Rpm Watts Shipping weight lbs. (kg) 1 package 107 (49) 140 (64) 143 (65) 140 (64) ELECTRICAL DATA Line voltage data 1 phase 208/230V 208/230V 208/230V 208/230V 4 Maximum overcurrent protection (amps) Minimum circuit ampacity ressor Rated load amps Locked rotor amps Power Factor Outdoor Full load amps Fan Locked rotor amps SPECIFICATIONS 1 PHASE Data Model No. HS HS HS HS Nominal Size Tons () 3 (10.6) 3.5 (12.3) 4 (14.1) 5 (17.6) 1 Sound Rating Number (db) Connections Liquid line o.d. in. (mm) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) (sweat) Suction line o.d. in. (mm) 3/4 (19.1) 7/8 (22.2) 7/8 (22.2) 1-1/8 (28.6) 3 Refrigerant (HCFC-22) furnished 4 lbs. 9 oz. (2.07 kg) 6 lbs. 0 oz. (2.72 kg) 6 lbs. 5 oz. (2.86 kg) 8 lbs. 0 oz. (3.63 kg) Outdoor Net face area Outer Coil (1.40) (1.40) (1.40) (1.40) Coil sq. ft. (m 2 ) Inner Coil 5.40 (0.50) 5.40 (0.50) (1.34) Tube diameter in. (mm) & no. of rows 5/16 (7.9) 1 5/16 (7.9) /16 (7.9) /16 (7.9) 2 Fins per inch (m) 22 (866) 18 (748) 18 (748) 18 (748) Outdoor Diameter in. (mm) & no. of blades 18 (457) 4 18 (457) 4 18 (457) 4 18 (457) 4 Fan hp (W) 1/6 (124) 1/6 (124) 1/3 (249) 1/3 (249) Cfm () 2520 (1195) 2400 (1130) 3115 (1470) 2930 (1385) Rpm Watts Shipping weight lbs. (kg) 1 package 148 (67) 161 (73) 194 (88) 212 (96) ELECTRICAL DATA Line voltage data 1 phase 208/230V 208/230V 208/230V 208/230V 4 Maximum overcurrent protection (amps) Minimum circuit ampacity ressor Rated load amps Locked rotor amps Power Factor Outdoor Full load amps Fan Locked rotor amps NOTE Extremes of operating range are plus 10% and minus 5% of line voltage. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard /8 x 5/16 in. (9.5 x 7.9 mm) adaptor furnished for liquid line connection. Refrigerant charge is sufficient for 15 ft. (4.6 m) length line set. 4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. 5 HACR type breaker or fuse. HS29 / Page 4

5 SPECIFICATIONS 3 PHASE General Model No. HS HS HS HS HS Data Nominal Size Tons () 3 (10.6) 3.5 (12.3) 4 (14.1) 5 (17.6) 5+ (17.6+) 1 Sound Rating Number (db) Connections (sweat) Liquid line o.d. in. (mm) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) Suction line o.d. in. (mm) 3/4 (19.1) 7/8 (22.2) 7/8 (22.2) 1-1/8 (28.6) 1-1/8 (28.6) 2 Refrigerant (HCFC-22) furnished 4 lbs. 13 oz. (2.18 kg) Outdoor Coil Outdoor Fan 6 lbs. 0 oz. (2.72 kg) 6 lbs. 0 oz. (2.72 kg) 8 lbs. 0 oz. (3.63 kg) 8 lbs. 0 oz. (3.63 kg) Net face area sq. ft. (m 2 ) Outer (1.40) (1.40) (1.40) (1.40) (1.40) Inner 5.40 (0.50) 5.40 (0.50) (1.34) (1.34) Tube diameter in. (mm) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) Number of rows Fins per inch (m) 22 (866) 22 (866) 18 (748) 18 (748) 18 (748) Diameter in. (mm) 18 (457) 18 (457) 18 (457) 18 (457) 18 (457) No. of blades hp (W) 1/6 (124) 1/6 (124) 1/3 (249) 1/3 (249) 1/3 (249) Cfm () 2520 (1195) 2400 (1130) 3115 (1470) 2930 (1385) 2930 (1385) Rpm Watts Shipping Data lbs. (kg) 1 package 145 (66) 158 (72) 191 (87) 207 (94) 254 (115) ELECTRICAL DATA Line voltage data 3 phase 208/230V 460V 208/230V 460V 208/230V 460V 575V 208/230V 460V 575V 208/230V 460V 3 Maximum overcurrent protection (amps) Minimum circuit ampacity ressor Rated load amps Outdoor Fan Locked rotor amps Power factor Full load amps Locked rotor amps NOTE Extremes of operating range are plus 10% and minus 5% of line voltage. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard 270. Refrigerant charge is sufficient for 15 ft. (4.6 m) length line set. 3 HACR type breaker or fuse. 4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. HS29 / Page 5

6 OPTIONAL ACCESSORIES must be ordered extra Model No. HS ressor 208/230V 1ph/3ph Crankcase 208/230V 1ph/3ph 90P12 Heater 460V 3ph 31J21 575V 3ph 18M11 ressor Hard Start Kit 10J42 1 Phase Only 81J69 ressor Low Ambient Cut Off 45F08 ressor 69J17 Sound 1 phase models 69J03 Cover 3 phase models 53J40 ressor Time Off Control 47J27 Freezestat 3/8 in. tubing 93G35 1/2 in. tubing 39H29 5/8 in. tubing 50A93 Hail Guards 17L71 17L72 17L73 High Pressure Switch Kit 94J46 Loss of Charge Kit 84M23 Low Ambient Kit 24H77 (TXV systems only) Mounting Base 69J06 Refrigerant Line Sets L L L L L L L L L L L L L L L L L L L Field Fabricate Unit Stand-Off Kit 94J45 FIELD WIRING DISCONNECT SWITCH (By Others) THERMOSTAT (Optional) DISCONNECT SWITCH (By Others) A Two or Three Wire Power B Two or Three Wire Power See Electrical Data B D A C Two Wire Low Voltage 18 ga. minimum D Four Wire Low Voltage (Electro Mechanical) 18 ga. minimum LENNOX AIR CONDITIONING UNIT C LENNOX HEATING UNIT OR AIR HANDLER INDOOR UNIT Five Wire Low Voltage (Electronic) 18 ga. minimum NOTE Field Wiring Not Furnished All wiring must conform to NEC or CEC and local electrical codes. HS29 / Page 6

7 DIMENSIONS INCHES (MM) INLET AIR 4 3/8 (111) 4 3/8 (111) 4 3/8 (111) 4 3/8 (111) INLET INLET OPTIONAL UNIT STAND OFF KIT (4) (Field Installed) COMPRESSOR AIR AIR COIL DRAIN OUTLETS (Around perimeter of base) SUCTION LINE CONNECTION 6 3/8 (162) 4 3/8 (111) INLET TOP VIEW 24 1/4 (616) AIR LIQUID LINE CONNECTION 6 3/8 4 3/8 (162) (111) TOP VIEW BASE SECTION 24 1/4 (616) OUTDOOR COIL FAN DISCHARGE AIR COMPRESSOR B A ELECTRICAL INLETS SUCTION & LIQUID LINE CONNECTION SIDE VIEW 3/4 (19) 2 (51) OPTIONAL UNIT STAND OFF KIT (4) (Field Installed) 2 3/4 (70) SIDE VIEW Model No. A B HS29 012, HS in /4 HS mm HS in /4 mm HS29 036, HS in /4 HS29 048, HS29 060, HS mm INSTALLATION CLEARANCES INCHES (MM) 1 36 (914) 1 36 (914) 1 36 (914) 1 One of the coil sides adjacent to control box must be 30 in. (762 mm) for service. One of the remaining sides may be 12 in. (914 mm) One of the remaining sides may be 6 inches (305 mm) NOTE 48 in. (1219 mm) clearance required on top of unit. NOTE 24 in. (610 mm) required between two units 1 36 (914) HS29 / Page 7

8 ARI RATINGS 1 and 1.5 TON 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 1T Ton Up-Flow 12, C33 18A 6 (74 db) 26K49 Order separately 1 phase 12, C33 24A/B 6 26K49 Order separately 13, C33 30A/B 6 26K49 Order separately Down-Flow 12, CR26 18N F 26K49 Order separately Horizontal 12, CH K49 Order separately 12, CH33 18A 2F 6 26K49 Order separately 12, CH K49 Order separately 13, CH33 36A/B/C 2F 6 26K49 Order separately Handlers 12, CB29M 21/26 (Multi Position) Factory Installed 12, CB28UH 018/024 (Up Flow/Horizontal) Factory Installed 13, CB30M 21/26 (Multi Position) Factory Installed 13, CB30U 21/26 (Up Flow) Factory Installed 12, CVP10 26/EC10Q3 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 11, C33 24A/B (83M54) 12, C33 30A/B (83M54) Down-Flow 11, CR26 30N F (83M54) Horizontal 12, CH33 36A/B/C 2F (83M54) HS Expansion Valve 15T 1.5 Ton Up-Flow 17, C33 18A 6 (76 db) 26K49 Order separately 1 phase 18, C33 24A/B 6 26K49 Order separately 19, C33 30A/B 6 26K49 Order separately Down-Flow 17, CR26 18N F 26K49 Order separately Horizontal 18, CH K49 Order separately 18, CH K49 Order separately 19, CH33 24/30A 2F 6 26K49 Order separately 19, CH33 36A/B/C 2F 6 26K49 Order separately Handlers 18, CB29M 21/26 (Multi Position) Factory Installed 18, CB28UH 018/024 (Up Flow/Horizontal) Factory Installed 18, CB30M 21/26 (Multi Position) Factory Installed 18, CB30U 21/26 (Multi Position) Factory Installed 18, CVP10 26/EC10Q3 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 18, C33 18A (42J40) 19, C33 24A/B (42J40) 19, C33 30A/B (42J40) Down-Flow 17, CR26 18N F (42J40) Horizontal 18, CH (42J40) 18, CH (42J40) 19, CH33 24/30A 2F (42J40) 19, CH33 36A/B/C 2F (42J40) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Most popular evaporator coil. 4 Canada Only 5 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 6 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 8

9 ARI RATINGS 2 TON 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 2T Ton Up-Flow 24, C33 24A/B 7 (76 db) 26K49 Order separately 1 phase 24, C33 30A/B 7 26K49 Order separately Up-Flow 25, C33 24C with G61MPV 36C K49 Order separately / 25, C33 24A/B with 6 G60UHV 36A/B 7 Furnace 26K49 Order separately 25, C33 24B with 6 G61MPV 36B 7 26K49 Order separately 25, C33 30C with G61MPV 36C K49 Order separately 25, C33 30A/B with 6 G60UHV 36A/B 7 26K49 Order separately 25, C33 36C with G61MPV 36C K49 Order separately 25, C33 30B with 6 G61MPV 36B 7 26K49 Order separately 26, C33 36A/B with 6 G60UHV 36A/B 7 26K49 Order separately 26, C33 36B with 6 G61MPV 36B 7 26K49 Order separately 27, C33 38A/B with 6 G60UHV 36A/B 7 26K49 Order separately 27, C33 38B with 6 G61MPV 36B 7 26K49 Order separately Down-Flow 22, CR26 18N F 26K49 Order separately 25, CR26 30N F 26K49 Order separately Horizontal 23, CH K49 Order separately 24, CH33 24/30A 2F 7 26K49 Order separately 25, CH K49 Order separately 25, CH33 36A/B/C 2F 7 26K49 Order separately Horizontal 25, CH33 24/30A 2F w/ G60UHV 36A K49 Order separately / Furnace 25, CH33 36C 2F with G61MPV 36C K49 Order separately 26, CH33 36A/B 2F w/ 6 G60UHV 36A/B 7 26K49 Order separately 26, CH33 36B 2F with 6 G61MPV 36B 7 26K49 Order separately 26, CH33 42B 2F with 6 G61MPV 36B 7 26K49 Order separately Handlers 22, CB29M 21/26 (Multi Position) Factory Installed 22, CB28UH 018/024 (Up Flow/Horizontal) Factory Installed 24, CB29M 31 (Multi Position) Factory Installed 24, CB28UH 030 (Up Flow/Horizontal) Factory Installed 25, CB30M 21/26 (Multi Position) Factory Installed 25, CB30U 21/26 (Up Flow) Factory Installed 25, CB30M 31 (Multi Position) Factory Installed 25, CB30U 31 (Up Flow) Factory Installed 24, CVP10 26/EC10Q3 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 24, C33 24A/B (42J43) 25, C33 30A/B (42J43) Down-Flow 23, CR26 18N F (42J43) 25, CR26 30N F (42J43) Horizontal 24, CH (42J43) 25, CH33 24/30A 2F (42J43) 25, CH33 36A/B/C 2F (42J43) 25, CH (42J43) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Most popular evaporator coil. 4 Canada Only 5 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 6 Includes all heat sizes for this model. 7 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 9

10 ARI RATINGS 2.5 TON 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 25T 2.5 Ton Up-Flow 29, C33 30A/B 7 26K34 Order separately (78 db) 29, C33 36A/B/C 7 26K34 Order separately 1 phase 31, C33 38A/B 7 26K34 Order separately Up-Flow 29, C33 30A/B with 6 G60UHV 36A/B 7 26K34 Order separately / 30, C33 36A/B with 6 G60UHV 36A/B 7 26K34 Order separately Furnace 30, C33 30C with G61MPV 36C K34 Order separately 30, C33 30B with 6 G61MPV 36B 7 26K34 Order separately 30, C33 36C with G61MPV 36C K34 Order separately 30, C33 36B with 6 G61MPV 36B 7 26K34 Order separately 31, C33 38A/B with 6 G60UHV 36A/B 7 26K34 Order separately 32, C33 38B with 6 G61MPV 36B 7 26K34 Order separately Down-Flow 29, CR26 30N F 26K34 Order separately 29, CR26 36N/W F 26K34 Order separately Down-Flow / Furnace 30, CR26 36W F with 6 G61MPV 36B 26K34 Order separately Horizontal 28, CH K34 Order separately 28, CH K34 Order separately 29, CH33 24/30A 2F 7 26K34 Order separately 29, CH33 36A/B/C 2F 7 26K34 Order separately 29, CH K34 Order separately 30, CH K34 Order separately 30, CH33 42B 2F 7 26K34 Order separately Horizontal 29, CH33 24/30A 2F w/ G60UHV 36A K34 Order separately / 30, CH33 36A/B 2F with 6 G60UHV 36A/B 7 26K34 Order separately Furnace 30, CH33 36B 2F with 6 G61MPV 36B 7 26K34 Order separately 30, CH33 36C 2F with G61MPV 36C K34 Order separately 31, CH33 42B 2F with G60UHV 36B K34 Order separately 31, CH33 42B 2F with 6 G61MPV 36B 7 26K34 Order separately Handlers 28, CB29M 31 (Multi Position) Factory Installed 28, CB28UH 030 (Up Flow/Horizontal) Factory Installed 28, CB29M 41 (Multi Position) Factory Installed 28, CB28UH 036 (Up Flow/Horizontal) Factory Installed 29, CB30M 21/26 (Multi Position) Factory Installed 29, CB30U 21/26 (Up Flow) Factory Installed 30, CB30M 31 (Multi Position) Factory Installed 30, CB30U 31 (Up Flow) Factory Installed 30, CB30M 41 (Multi Position) Factory Installed 30, CB30U 41/46 (Up Flow) Factory Installed 30, CB31MV 41 (Multi Position) Factory Installed 29, CVP10 31/EC10Q3 (Up Flow) Factory Installed 30, CVP10 41/EC10Q3 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 29, C33 30A/B (42J45) 29, C33 36A/B/C (42J45) 31, C33 38A/B (42J45) Down-Flow 29, CR26 30N F (42J45) 30, CR26 36N/W F (42J45) Horizontal 28, CH (42J45) 29, CH33 30A 2F (42J45) 29, CH33 36A/B/C 2F (42J45) 29, CH (42J45) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Most popular evaporator coil. 4 Canada Only 5 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 6 Includes all heat sizes for this model. 7 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 10

11 ARI RATINGS 3 TON (1 PHASE) 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 3T Ton Up-Flow 35, C33 36A/B/C 7 26K34 Order separately (78 db) 35, C33 42B 7 1 phase 26K34 Order separately 36, C33 44C 7 26K34 Order separately 36, C33 48B/C 7 26K34 Order separately 36, C33 38A/B 7 26K34 Order separately Up-Flow 35, C33 36A/B with 6 G60UHV 36A/B 7 26K34 Order separately / 35, C33 36B with 6 G61MPV 36B 7 26K34 Order separately Furnace 35, C33 36C with G61MPV 36C K34 Order separately 37, C33 38B with 6 G61MPV 36B 7 26K34 Order separately 37, C33 38A/B with 6 G60UHV 36A/B 7 26K34 Order separately Down-Flow 33, CR26 36N F Only 26K34 Order separately 34, CR26 36W F Only 26K34 Order separately 35, CR26 48N/W F 26K34 Order separately Down-Flow 36, CR26 36W F with 6 G61MPV 36B 26K34 Order separately / Furnace Horizontal 34, CH33 36A/B/C 2F 7 26K34 Order separately 35, CH K34 Order separately 37, CH33 48C 2F 7 26K34 Order separately 35, CH K34 Order separately Horizontal 35, CH33 36A/B 2F with 6 G60UHV 36A/B 7 26K34 Order separately / 35, CH33 36B 2F with 6 G61MPV 36B 7 26K34 Order separately Furnace 35, CH33 36C 2F with G61MPV 36C K34 Order separately 36, CH33 42B 2F with G60UHV 36B K34 Order separately 36, CH33 42B 2F with 6 G61MPV 36B 7 26K34 Order separately 37, CH33 44/48B 2F w/ G60UHV 36B K34 Order separately 37, CH33 44/48B 2F with 6 G61MPV 36B 7 26K34 Order separately Handlers 32, CB29M 31 (Multi Position) Factory Installed 32, CB28UH 030 (Up Flow/Horizontal) Factory Installed 33, CB29M 41 (Multi Position) Factory Installed 33, CB28UH 036 (Up Flow/Horizontal) Factory Installed 35, CB29M 46 (Multi Position) 7 26K34 Order separately 35, CB28UH 042 (Up Flow/Horizontal) 7 26K34 Order separately 35, CB30M 31 (Multi Position) Factory Installed 35, CB30U 31 (Up Flow) Factory Installed 35, CB30M 41 (Multi Position) Factory Installed 35, CB30U 41/46 (Up Flow) Factory Installed 35, CB30M 46 (Multi Position) 7 26K34 Order separately 35, CB31MV 41 (Multi Position) Factory Installed 35, CVP10 41/EC10Q3 (Up Flow) Factory Installed 35, CVP10 46/EC10Q4 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 34, C33 36A/B/C (42J48) 34, C33 42B (42J48) 36, C33 38A/B (42J48) Down-Flow 35, CR26 36N F Only (42J48) 35, CR26 36W F Only (42J48) Horizontal 34, CH33 36A/B/C 2F (42J48) 34, CH (42J48) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Most popular evaporator coil. 4 Canada Only 5 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 6 Includes all heat sizes for this model. 7 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 11

12 ARI RATINGS 3 TON (3 PHASE) 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 3T Ton Up-Flow 34, C33 36A/B/C 5 (78 db) 26K34 Order separately 3 phase 35, C33 42B 5 26K34 Order separately 36, C33 38A/B 5 26K34 Order separately 36, C33 44C 5 26K34 Order separately 36, C33 48B/C 5 26K34 Order separately Down-Flow Horizontal 35, CR26 36N/W F 26K34 Order separately 35, CH33 36A/B/C 2F 5 26K34 Order separately 35, CH K34 Order separately Handlers 33, CB29M 31 (Multi Position) Factory Installed 33, CB28UH 030 (Up Flow/Horizontal) Factory Installed 34, CB29M 41 (Multi Position) Factory Installed 34, CB28UH 036 (Up Flow/Horizontal) Factory Installed 35, CB30M 31 (Multi Position) Factory Installed 35, CB30U 31 (Up Flow) Factory Installed 36, CB29M 46 (Multi Position) 5 26K34 Order separately 36, CB28UH 042 (Up Flow/Horizontal) 5 26K34 Order separately 36, CB30M 41 (Multi Position) Factory Installed 36, CB30U 41/46 (Up Flow) 5 26K34 Order separately 36, CB30M 46 (Multi Position) 5 26K34 Order separately 36, CB31MV 41 (Multi Position) Factory Installed 37, CB30M 51 (Multi Position) 5 26K34 Order separately 37, CB30U 51 (Up Flow) 5 26K34 Order separately 37, CB31MV 51 (Multi Position) 5 26K34 Order separately 35, CVP10 41/EC10Q3 (Up Flow) Factory Installed 35, CVP10 46/EC10Q4 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 34, C33 36A/B/C (42J48) 35, C33 42B (42J48) Down-Flow 35, CR26 36N/W F (42J48) Horizontal 35, CH33 36A/B/C 2F (42J48) 35, CH (42J48) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 4 Canda Only. 5 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 12

13 ARI RATINGS 3.5 TON 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 35T 3.5 Ton Up-Flow 38, C33 42B 7 26K35 Order separately (78 db) 39, C33 44C 7 1 and 3 26K35 Order separately phase 40, C33 48B/C 7 26K35 Order separately 40, C33 50/60C 7 26K35 Order separately 40, C33 60D 7 26K35 Order separately Up-Flow 40, C33 44C with 6 G61MPV 60C 7 26K35 Order separately / 40, C33 44C with 6 G60UHV 60C 7 26K35 Order separately Furnace 40, C33 48C with 6 G60UHV 60C 7 26K35 Order separately 40, C33 48C with 6 G61MPV 60C 7 26K35 Order separately 41, C33 50/60C with 6 G60UHV 60C 7 26K35 Order separately 41, C33 50/60C with 6 G61MPV 60C 7 26K35 Order separately Down-Flow 35, CR26 36N F Only 26K35 Order separately 37, CR26 36W F Only 26K35 Order separately 39, CR26 48N/W F 26K35 Order separately 40, CR26 60N/W F 26K35 Order separately Horizontal 39, CH K35 Order separately 39, CH K35 Order separately 39, CH33 42B 2F 7 26K35 Order separately 39, CH K35 Order separately 40, CH33 48C 2F 7 26K35 Order separately 40, CH33 60D 2F 7 26K35 Order separately Horizontal 41, CH33 48C 2F with 6 G60UHV 60C 7 26K35 Order separately / 41, CH33 48C 2F with 6 G61MPV 60C 7 26K35 Order separately Furnace 41, CH33 50/60C 2F with 6 G60UHV 60C 7 26K35 Order separately 41, CH33 50/60C 2F with 6 G61MPV 60C 7 26K35 Order separately Handlers 36, CB29M 41 (Multi Position) 7 26K35 Order separately 36, CB28UH 036 (Up Flow/Horizontal) 7 26K35 Order separately 38, CB30M 41 (Multi Position) 7 26K35 Order separately 38, CB29M 46 (Multi Position) Factory Installed 38, CB28UH 042 (Up Flow/Horizontal) Factory Installed 38, CB30M 46 (Multi Position) Factory Installed 38, CB30U 41/46 (Up Flow) Factory Installed 38, CB31MV 41 (Multi Position) 7 26K35 Order separately 39, CB29M 51 (Multi Position) Factory Installed 39, CB28UH 048 (Up Flow/Horizontal) Factory Installed 41, CB30M 51(Multi Position) Factory Installed 41, CB30U 51 (Up Flow) Factory Installed 41, CB31MV 51(Multi Position) Factory Installed 38, CVP10 46/EC10Q4 (Up Flow) Factory Installed 39, CVP10 51/EC10Q4 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 40, C33 42B (42J51) 42, C33 48B/C (42J51) Down-Flow 40, CR26 36W F (42J51) 41, CR26 48N/W F (42J51) Horizontal 40, CH33 42B 2F (42J51) 40, CH (42J51) 41, CH33 48C 2F (42J51) 41, CH (42J51) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Most popular evaporator coil. 4 Canada Only 5 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 6 Includes all heat sizes for this model. 7 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 13

14 ARI RATINGS 4 TON (1 PHASE) 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 4T Ton Up-Flow 45, C33 44C 7 26K35 Order separately (80 db) 47, C33 48B/C 7 1 phase 26K35 Order separately 47, C33 50/60C 7 26K35 Order separately 48, C33 60D 7 26K35 Order separately 48, C33 62D 7 26K35 Order separately Up-Flow 47, C33 48C with 6 G61MPV 60C 7 26K35 Order separately / 47, C33 50/60C with 6 G61MPV 60C 7 26K35 Order separately Furnace 47, C33 48C with 6 G60UHV 60C 7 26K35 Order separately 48, C33 50/60C with 6 G60UHV 60C 7 26K35 Order separately Down-Flow 45, CR26 48N/W F 26K35 Order separately 47, CR26 60N/W F 26K35 Order separately Horizontal 47, CH33 44/48B 2F 7 26K35 Order separately 46, CH K35 Order separately 48, CH33 50/60C 2F 7 26K35 Order separately 46, CH K35 Order separately 48, CH33 62D 2F 7 26K35 Order separately 48, CH K35 Order separately Horizontal 48, CH33 48C 2F with 6 G60UHV 60C 7 26K35 Order separately / 48, CH33 48C 2F with 6 G61MPV 60C 7 26K35 Order separately Furnace 48, CH33 50/60C 2F with 6 G60UHV 60C 7 26K35 Order separately 48, CH33 50/60C 2F with 6 G61MPV 60C 7 26K35 Order separately Handlers 43, CB30M 41 (Multi Position) 7 26K35 Order separately 43, CB30U 41/46 (Up Flow) 7 26K35 Order separately 44, CB31MV 41 (Multi Position) 7 26K35 Order separately 44, CB29M 46 (Multi Position) Factory Installed 44, CB28UH 042 (Up Flow/Horizontal) Factory Installed 44, CB30M 46 (Multi Position) Factory Installed 45, CB29M 51 (Multi Position) Factory Installed 45, CB28UH 048 (Up Flow/Horizontal) Factory Installed 46, CB29M 65 (Multi Position) Factory Installed 46, CB28UH 060 (Up Flow/Horizontal) Factory Installed 48, CB30M 51 (Multi Position) Factory Installed 48, CB30U 51 (Up Flow) Factory Installed 48, CB31MV 51 (Multi Position) Factory Installed 48, CB30M 65 (Multi Position) Factory Installed 48, CB30U 65 (Up Flow) Factory Installed 48, CB31MV 65 (Multi Position) Factory Installed 46, CVP10 51/EC10Q4 (Up Flow) Factory Installed 47, CVP10 65/EC10Q5 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 47, C33 48B/C (42J55) 49, C33 60D (42J55) 49, C33 62D (42J55) Down-Flow 46, CR26 48N/W F (42J55) 48, CR26 60N/W F (42J55) Horizontal 47, CH (42J55) 47, CH33 44/48B 2F (42J55) 47, CH (42J55) 48, CH33 48C 2F (42J55) 48, CH33 60D 2F (42J55) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Most popular evaporator coil. 4 Canada Only 5 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 6 Includes all heat sizes for this model. 7 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 14

15 ARI RATINGS (3 PHASE) 4 TON (3 PHASE) 2 ARI Standard 210/240 Ratings Outdoor Unit Model No. Unit Size Efficiency Refrigerant 1 Sound Rating Number Unit Metering Btuh SEER EER Watts Indoor Unit Model No. Device HS Expansion Valve 4T Ton Up-Flow 45, C33 44C 5 (80 db) 26K35 Order separately 3 phase 46, C33 48B/C 5 26K35 Order separately Down-Flow Horizontal 46, C33 50/60C 5 26K35 Order separately 47, C33 60D 5 26K35 Order separately 48, C33 62D 5 26K35 Order separately 46, CR26 48N/W F 26K35 Order separately 46, CR26 60N/W F 26K35 Order separately 45, CH33 44/48B 2F 5 26K35 Order separately 45, CH K35 Order separately 46, CH33 50/60C 2F 5 26K35 Order separately 46, CH K35 Order separately 48, CH33 62D 2F 5 26K35 Order separately 48, CH K35 Order separately Handlers 43, CB30M 41 (Multi Position) 5 26K35 Order separately 43, CB31MV 41 (Multi Position) 5 26K35 Order separately 45, CB29M 51 (Multi Position) Factory Installed 45, CB28UH 048 (Up Flow/Horizontal) Factory Installed 45, CB30M 46 (Multi Position) Factory Installed 45, CB30U 41/46 (Up Flow) Factory Installed 45, CB29M 65 (Multi Position) Factory Installed 45, CB28UH 060 (Up Flow/Horizontal) Factory Installed 46, CB30M 51 (Multi Position) Factory Installed 46, CB30U 51 (Up Flow) Factory Installed 46, CB31MV 51 (Multi Position) Factory Installed 46, CB30M 65 (Multi Position) Factory Installed 46, CB30U 65 (Up Flow) Factory Installed 47, CB31MV 65 (Multi Position) Factory Installed 44, CVP10 51/EC10Q4 (Up Flow) Factory Installed 45, CVP10 65/EC10Q5 (Up Flow) Factory Installed RFCIV Metering Orifice Up-Flow 46, C33 48B/C (42J55) 47, C33 60D (42J55) Down-Flow Horizontal 46, CR26 48N/W F (42J55) 46, CR26 60N/W F (42J55) 45, CH33 48C 2F (42J55) 45, CH33 44/48B 2F (42J55) 45, CH (42J55) 46, CH33 60D 2F (42J55) 46, CH (42J55) NOTE Ratings for all C33 include both cased and uncased. 1 Sound Rating Number rated in accordance with test conditions included in ARI Standard Certified in accordance with USE certification program which is based on ARI Standard 210/240; 95 F (35 C) outdoor air temperature, () db / wb entering evaporator air with 25 ft. (7.6 m) of connecting refrigerant lines. 3 Canada Only 4 RFCIV metering device is furnished with air conditioning unit for field installation in indoor unit. 5 Factory installed RFC or expansion valve on indoor unit MUST be replaced with valve specified, order separately. HS29 / Page 15