PU SERIES 1W UNREGULATED
|
|
|
- Abigayle Bishop
- 6 years ago
- Views:
Transcription
1 PU SERIES 1W UNREGULATED FEATURES IN LINE PACKAGE 1W UNREGULATED POWER 100% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT 3 YEARS WARRANTY SPECIFICATIONS SPECIFICATIONS Voltage Set-point Accuracy +/-2% max. Input Voltage Range +/-10% max. Temperature Coefficient +/-0.05%/ C Input Filter Capacitor Type Ripple & Noise(20MHz BW) 100mVp-p max. Input Reflected Ripple Current 50mAp-p max. Line Regulation 1 +/-1.2% max. Protection Fuse Recommended Load Regulation 2 +/-8% max. GENERAL SPECIFICATIONS Minimum Load 20% of Full Load Efficiency 70%-83% Short Circuit Protection Momentary Isolation Voltage 3 Single/Dual VDC min. Twin In to Out 1000 VDC min. Out to Out 500 VDC min. Isolation Resistance 10 9 ohms min. ENVIRONMENTAL SPECIFICATIONS Isolation Capacitance 80pF max. Operating Temperature -40 C to +71 C Switching Frequency 100KHz min. Storage Temperature -55 C to +125 C MTBF 4 >2,000,000 Hours Humidity 95% max. Weight 2.1g typ. Cooling Free-Air Convection Case Material Non-Conductive Plastic Case Size 19.6mm*6.1mm*10.2mm 19.6mm*7.1mm*10.2mm Radiated Emissions EN55032 Class B ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD AND 25 O C UNLESS OTHERWISE NOTED. 1 Line Regulation is for a 1.0% change in input Voltage. 2 Load Regulation is for output load current change from 20% to 100% VDC for 10 seconds,3000vdc for 3 seconds. 4 C, Ground Benign. 1
2 SELECTION GUIDE(1) 1W 1500VDC ISOLATION 5 MODEL NUMBER CURRENT (ma) CURRENT(mA) EFF FULL NO (%) 6 ISOLATION PACKAGE LOAD LOAD PUS (A or B) A or B PUS-0505(A or B or E) A or B or E PUS-0509(A or B or E) A or B or E PUS-0512(A or B or E) A or B or E PUS-0515(A or B or E) A or B or E PUD-0505(A or B) 5 +/-5 +/ A or B PUD-0509(A or B) 5 +/-9 +/ A or B PUD-0512(A or B) 5 +/-12 +/ A or B PUD-0515(A or B) 5 +/-15 +/ A or B PUS-0909(A or B) A or B PUS (A or B) A or B PUS-1205(A or B or E) A or B or E PUS-1209(A or B or E) A or B or E PUS-1212(A or B or E) A or B or E PUS-1215(A or B or E) A or B or E PUD-1205(A or B) 12 +/-5 +/ A or B PUD-1212(A or B) 12 +/-12 +/ A or B PUD-1215(A or B) 12 +/-15 +/ A or B PUS C C PUS-2405C C PUS-2409C C PUS-2412C C PUS-2415C C PUS-2424C C PUD-2405C 24 +/-5 +/ C PUD-2412C 24 +/-12 +/ C PUD-2415C 24 +/-15 +/ C Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: PUS-****A( A PACKAGE) PUD-****A(DUAL A PACKAGE) PUS-****B( B PACKAGE) PUD-****B(DUAL B PACKAGE) 5 NOMINAL. 6 NOMINAL, FULL LOAD. 2
3 SELECTION GUIDE(2) 1W 1500VDC ISOLATION 7 MODEL NUMBER CURRENT (ma) CURRENT(mA) EFF FULL NO (%) 8 ISOLATION PACKAGE LOAD LOAD PUS AY AY PUS-0505AY AY PUS-0509AY AY PUS-0512AY AY PUS-0515AY AY PUD-0505AY 5 +/-5 +/ AY PUD-0512AY 5 +/-12 +/ AY PUD-0515AY 5 +/-15 +/ AY PUS-0909AY AY PUS AY AY PUS-1205AY AY PUS-1209AY AY PUS-1212AY AY PUS-1215AY AY PUD-1205AY 12 +/-5 +/ AY PUD-1212AY 12 +/-12 +/ AY PUD-1215AY 12 +/-15 +/ AY PUS CY CY PUS-2405CY CY PUS-2409CY CY PUS-2412CY CY PUS-2415CY CY PUS-2424CY CY PUD-2405CY 24 +/-5 +/ CY PUD-2412CY 24 +/-12 +/ CY PUD-2415CY 24 +/-15 +/ CY Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: PUS-****AY( AY PACKAGE) PUD-****AY(DUAL AY PACKAGE) PUS-****CY( CY PACKAGE) PUD-****CY(DUAL CY PACKAGE) 7 NOMINAL. 8 NOMINAL, FULL LOAD. 3
4 SELECTION GUIDE(3) 1W DUAL SEPARATE MODEL NUMBER CURRENT (ma) OUT1 OUT2 OUT1 OUT2 9 CURRENT(mA) EFF (%) 10 FULL NO LOAD LOAD ISOLATION PACKAGE PUD F PUD F PUD F PUD F PUD F PUD F PUD F PUD F PUD F PUD F PUD F PUD F Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: PUD-******(TWIN F PACKAGE) 9 NOMINAL. 10 NOMINAL, FULL LOAD. 4
5 SELECTION GUIDE(4) 1W 3000VDC ISOLATION MODEL NUMBER CURRENT (ma) 11 CURRENT(mA) FULL NO LOAD LOAD EFF (%) 12 ISOLATION PACKAGE PUS K D PUS K B PUS K B PUS K B PUS K B PUS K B PUD K 5 +/-3.3 +/ B PUD K 5 +/-5 +/ B PUD K 5 +/-12 +/ B PUD K 5 +/-15 +/ B PUS K B PUS K B PUS K B PUS K B PUS K B PUD K 12 +/-5 +/ B PUD K 12 +/-12 +/ B PUD K 12 +/-15 +/ B PUS K D PUS K D PUS K D PUS K D PUS K D PUD K 24 +/-5 +/ D PUD K 24 +/-12 +/ D PUD K 24 +/-15 +/ D Note: Other input to output voltages may be available. Please contact factory. ORDERING INFORMATION: FOR EXAMPLE: PUS-****-3K( 3000V ISOLATION) PUD-****-3K(DUAL 3000V ISOLATION) 11 NOMINAL. 12 NOMINAL, FULL LOAD. 5
6 MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS PACKAGE A PIN DUAL 1 +Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 NP COMMON 6 +Vout +Vout DUAL PACKAGE B PIN DUAL 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout 6 NP COMMON 7 +Vout +Vout DUAL
7 PACKAGE C PIN DUAL 1 +Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 NP COMMON 6 +Vout +Vout DUAL PACKAGE D PIN DUAL 1 +Vin +Vin 2 -Vin -Vin 5 -Vout -Vout 6 NP COMMON 7 +Vout +Vout DUAL
8 PACKAGE E PIN 1 +Vin 2 -Vin 4 NP 5 -Vout 6 +Vout PACKAGE F TWIN PIN TWIN 1 +Vin 2 -Vin 4 +5V / Vout 1 5-5V / Vout Vout Vout 2 8
9 PACKAGE AY PIN DUAL 1 +Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 NP COMMON 6 +Vout +Vout DUAL PACKAGE CY PIN DUAL 1 +Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 NP COMMON 6 +Vout +Vout DUAL
10 SIMPLIFIED SCHEMATIC DUAL +Vin +Vout +Vin +Vout OSCILLATOR DRIVER OSCILLATOR DRIVER COMMON -Vin -Vout -Vin TWIN -Vout +Vin +Vout 1 OSCILLATOR DRIVER -Vout 1 +Vout 2 -Vin -Vout 2 TYPICAL APPLICATIONS DUAL +Vin DC-DC CONVERTER -Vin +Vout -Vout LOAD +Vin DC-DC CONVERTER -Vin +Vout Common -Vout LOAD1 LOAD2 TWIN +Vin +Vout 1 -Vout 1 DC-DC CONVERTER +Vout 2 -Vi n -Vout 2 LOAD1 LOAD2 10
11 TYPICAL PERFORMANCE CURVES Specifications typical at TA=25 C,nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD(3.3Vout Models) VOUT VS LOAD(5Vout Models) VOUT VS LOAD(+/-5Vout Models) VOUT VS LOAD(9Vout Models) /-25 +/-50 +/-75 +/ VOUT VS LOAD(12Vout Models) VOUT VS LOAD(+/- 12Vout Models) /-10 +/-20 +/-30 +/-40 VOUT VS LOAD(15Vout Models) VOUT VS LOAD(+/- 15Vout Models) /-7.5 +/-15 +/ /-30 11
12 POWER(%) 125% DERATING CURVE EFFICIENCY VS LOAD 100% 75% 50% 25% SA F E O P ER AT IN G A R EA TA (d egree C ) EFFICIENCY(%) % OF RATED LOAD(%) FUSE SELECTION GUIDE V V V 800mA Slow-Blow Type 300mA Slow-Blow Type 150mA Slow-Blow Type Fuse +Vin +Vout DC-DC CONVERTER -Vi n Note: Certain applications may require the installation of external fuse in front of the input. -Vout PU SERIES APPLICATION NOTES: EXTERNAL CAPACITANCE REQUIREMENTS: Output filtering is required for operation. A minimum of 10uF is needed. Output capacitance may be increased for additional filtering, not to exceed 220uF. To meet the reflected ripple requirements of the converter, an input impedance of less than 0.5ohm from DC to 250KHz is required. We Can Offer EMC-Filter According To EN55032 Class B. Negative Outputs: A negative output voltage may be obtained by connecting the +OUT to circuit ground and connecting OUT as the negative output. FOR MORE INFORMATION CALL: Danube Enterprise Co., Ltd. Tel: Fax: danube@ms10.hinet.net Home Page 12
LW SERIES 5W WIDE INPUT RANGE
LW SERIES 5W WIDE INPUT RANGE FEATURES 5W DIL PACKAGE INDUSTRY STANDARD PACKAGE NO EXTERNAL COMPONENTS REQUIRED 4.5-9,9-18V,18-36V,36-72V,9-27V,18-54V, 9-36V,18V-72V WIDE INPUTRANGE 100% BURN-IN HIGH EFFICIENCY
DEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
Voltage Set-point Accuracy +/-2% max. Input Voltage Range 2:1 or 4:1 Input Range. Short Circuit Restart Automatic Efficiency 88% typ.
FEW SERIES 0~0W WIDE RANGE FEATURES 0~0W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-8V,8-V,-7V,9-V,8-7V WIDE RANGE REGULATED UVLO & OVLO HIGH EFFICIENCY UL 9V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE
KQWS SERIES 40W WIDE INPUT RANGE
KQWS SERIES 40W WIDE INPUT RANGE FEATURES 40W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-18V,18-36V,36-75V,9-36V,18-75V WIDE INPUT RANGE 100% BURN IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS
KHWS SERIES 40W-80W WIDE INPUT RANGE
KHWS SERIES 4W-8W WIDE RANGE FEATURES 4W-8W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9V-18V,18V-V,V-5V WIDE RANGE 1% BURN IN EFFICIENCY UP TO 9% UL 94V- PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE YEARS WARRANTY
E-Star Power Development Co., Ltd. (E-STAR) Phone : Fax :
E-Star Power Development Co., Ltd. (E-STAR) No.305, Sec. 2, Jhongshan Rd., Banciao City, Taipei County 22067, Taiwan Phone : 886-2-2957 5580 Fax : 886-2-2957 7473 2/4A Open Frame type Non-Isolation DC
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
Series AM1D-Z 1 Watt DC-DC Converter
FEATURES: RoHS compliant High efficiency up to 80% Low profile plastic package 7 pin SIP package Operating temperature -40 o C to + 85 o C Short circuit protection Pin compatible with multiple manufacturers
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
RUZ- _/_ Protection (3) Isolation Option (4)
Features Unregulated Converters Description Dual output from a single input rail 1kVDC or 2kVDC input/output basic isolation 1kVDC output/output isolation Power sharing on outputs Optional continuous short
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
Series AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
Series AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
Series AM2D-RZ 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Models Single output Model Input RoHS Compliant Operating Temperature - o C to +85 o C High Efficiency up to 89% Pin Compatible with Multiple
Features. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual
Features Unregulated Converters Low cost 2W converter Industry standard SIP7 package 3kVDC or 4kVDC isolation options Single or dual outputs Short circuit protected (/P versions) EN62368-1 DC/DC Converter
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
Series AM2D-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single output Input FEATURES: RoHS Compliant Low Ripple and Noise High up to 82% 7 Pin SIP Package Current (ma) Operating Temperature -40 o C to +85
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
MODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
DH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
Unit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
Series AM2D-Z 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to +85 o C Low ripple and noise With derating above +75C (see chart) High efficiency up to 82% Pin compatible with multiple manufacturers
Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
UL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
Sales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 84-251 n/a RB-55S 1W SGL OUTPUT CONVERTER SIL RC 84-2511 n/a RB-512S 1W SGL OUTPUT CONVERTER SIL RC 84-2512 n/a RB-515S 1W SGL OUTPUT CONVERTER SIL RC
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
RS5/RD5-R10/RD10. RoHS. 1.0W Regulated Single & Dual Output
1.0W Regulated RS5/RD5-R10/RD10 8 Pin SIL/ 16Pin DIL Package Wide 2:1 Input Range 1000VDC Isolation Up to 3000VDC Isolation Continuous Short Circuit Protection Efficiency up to 77% Operating Temperature
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
Features. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
DC/DC Converter URB1D_LMD-10WR3 Series
DC/DC Converter FEATURES 10W, ultra wide input isolated & regulated single output DC-DC converter Ultra wide input voltage range (4:1) High efficiency up to 85% Enhanced isolation, isolation voltage: 2250VDC
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
RCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
DC/DC Converter URF48_QB-75W(F/H)R3 Series
DC/DC Converter 75W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 93% Isolation voltage: 2.25K VDC Input under-voltage
C B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
HAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
DC/DC Converter URB1D_LD-15W & URB1D_LD-20W Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated DC/DC converter Wide range of input voltage (4:1) Efficiency up to 89% Isolation voltage :1.5K VDC Operating temperature range: -40
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
DCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
HAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
DC/DC Converter URF48_QB-200W(F/H)R3 Series
DC/DC Converter 200W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 91% Isolation voltage: 2.25K VDC Input under-voltage
Series AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
Series AM2S-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single Model Voltage (V) FEATURES: RoHSCompliant Operating Temperature - to +85 4 Pin SIP Package / Isolation and 3VDC Ultra MiniaturePackage
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
FEATURES. Input Voltage (VDC) 3.3
DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation
Features. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
output Output Voltage min (ma)
SERIES: VBT1-SMT DESCRIPTION: DC-DC CONVERTER date 11/01/2012 page 1 of FEATURES 1 W isolated industry standard 8 pin SMT package dual unregulated s 1,000 V isolation short circuit protection UL safety
4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
Efficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
MGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC/DC Converters
www.murata-ps.com MGJ1 Series FEATURES Patent pending Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives Reinforced insulation to UL69 recognised ANSI/AAMI ES661-1 recognition pending
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
MPP10-48 S 05 W A - P T Series Name Input Output Output Input Pin Connection Remote On/Off Trim Voltage Quantity Voltage Range Option Options Option
Medical PV Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Railway PART NUMBER STRUCTURE MPP10-48 S 05 W A - P T Name Input Output Output Input Pin Connection Remote On/Off
S24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
NXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
Packaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
RP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
DC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated dual / single output DC/DC converter Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 90% Isolation voltage
Sixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
S24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
Volant NEA/NEF010 Series
Features: Small size, minimal footprint/low profile 10A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
MEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
MEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
NXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise