11/ ft/45ft ISO Hook Lifts Series CHU-40

Transcription

1 40ft/45ft ISO Hook Lifts Series CHU-40

2 Features Suitable for 20ft/30ft/40ft/45ft ISO Containers (optionally: High Cube) Supplied as Mounting Kit or fully mounted on semi-trailer or low bed semi-trailer Lifting Capacity: 35 tons (on request: up to 80 tons) O.A. Length: 13,138 mm/40ft (optionally: 45ft = 14,695 mm) - Width: 2,550 mm Tare weight: ca. 5,200 kgs - Lifting angle: ca. 18 Rotating & telescopic, hydraulic lift arm - made of Steel Weldox 700 (Yield strength of 700 kgs/mm) Robust ISO Spreader for standard ISO Containers (optionally: High Cube) Structure completely made of wear resistant & high-tensile Steel Weldox 700 High-tensile steel frame with double C-shaped block Sturdy, sliding cart with reinforced hook post base - made of Steel Weldox 700 Loading/Unloading time: approx. 2 minutes/per cycle

3 Features Double, hydraulically operated rear roll stabilizers - made of Steel Weldox 700 Foldable rear rollers bearings - made of Steel Weldox pcs. Twist locks Robust, double hydraulic motors with flanges for chain drive Wear resistant 3/4" triple chain with a capacity of around 15,000 kgs Radio Control Quick couplings & emergency solenoid safety devices CE Certificate acc. to EU Machinery Directive 2006/42/CE Required hydraulic oil tank: Min. 140 l volume Required hydraulic oil pump: 70 l/min - Max. working pressure: 350 bar - Average working pressure: 250 bar On request: Tilting cylinder for dumping containers with an angle of 45 On request: Layout acc. to ADR-S

4 ISO Container Spreader (optionally: High Cube) Telescopic Hook Post ISO Spreader Spreader/Details Foldable Rear Roller Bearing

5 Foldable Rear Roller Bearings Foldable Rear Roller Bearings Rear Roll Stabilizer

6 Hydraulically Adjustable Rear Roll Stabilizer Extended Rear Roll Stabilizer Foldable Rear Roller Bearings Retracted Rear Roll Stabilizer

7 Sliding Telescopic Hook Lift Arm Telecopic Hook Post Tilting Cylinder (optionally) Sliding Cart

8 Hydraulic Drive & Chain/Belt

9 Sturdy, Sliding Cart

10 Reinforced Hook Post Base

11 Powerful Dumping by Tilting Cylinder (optionally) Tilting Cylinder Foldable Rear Roller Bearings

12 Loading/Unloading = within approx. 2 minutes

13 Module (Mounting Kit) Complete Unit with Semi-Trailer

14 Option: Sansavini Semi-Trailer Mod. S3P381TA for 40ft ISO Containers

15 Chassis: 3 axles with air suspension Reinforced frame (1,420 mm) with double T section Axles and suspension: ROR or BPW Braking system: ABS-EBS 2" fifth wheel 2-speed landing gear 6 tires 385/55 R 22.5 Rear bumper in stainless steel Lights "Aspöck" Dimensions & Weights: Maximum length: 13,600 mm Maximum width: 2,532 mm Tare weight: approx. 6,000 kgs Payload with 2-axles tractor: 27,500 kgs Payload with 3-axles tractor: 37,000 kgs Painting: 2 coats of epoxy bi-component/2 coats of catalyzed gray frame Coat of protective wax in case of sea transport Optional Accessories: Auxiliary diesel engine 45 HP (Complete with pump, tank for oil, fuel filters and starter panel with warning lights - to be installed in the center of the frame by resting on silent-block supports) General Information: Homologation Documents/EU Type Approval Warranty: 1 year on structural parts Installation, Operation & Maintenance Manual in English language CE Certificate acc. to 2006/42/CE

16 Series CHU-40 (40ft/45ft ISO Container Hook Lift) Model Lifting Capacity Container Lengths Container Width Tare Weight CHU 40/35-L 35 tons up to 12,191 mm 2,500 mm ca. 5,000 kg CHU 40/35-LT* 35 tons up to 12,191 mm 2,500 mm ca. 5,200 kg CHU 40/45-L 45 tons up to 12,191 mm 2,500 mm ca. 5,200 kg CHU 40/60-L 60 tons up to 12,191 mm 2,500 mm ca. 5,300 kg LT* = Tilting Cylinder for dumping All versions also available for 45ft (13,716 mm) ISO Containers & High Cube Other models on request

17 ContiLift OÜ in Estonia are one of the leading specialists for innovative engineering and supply of custom-engineered, high-performance 20'/40' ISO Container Hook Lifts & 40' Heavy Duty Hook Lifts in a range from 20 tons up to 80 tons as well as of 20' ISO Hook Lift Adapter Kits - distributed worldwide under the brand ContiLift and qualified for operations in tough environmental conditions. This has proved to be true in the past by satisfied customers being involved in the businesses of mining, scrap recycling, waste disposal & transport logistics. Since 2009 we have developed and/or delivered customized & standard products as fully mounted units or prefabricated modules, which are assembled - acc. to your requirements - by contractual partners in Northern Italy with CE Certificate. Here, at ContiLift OÜ, we have daily the target to develop, produce and distribute more intelligent, cost-effective and durable solutions in regard to equipment, which really eases the work of transport logistics!

18 40ft ISO Hook Lifts 20ft ISO Hook Lifts 20ft ISO Adapter Kits Customized Hook Lifts 40ft Heavy Duty Hook Lifts Semi-Trailer Hook Lifts Progress by Innovations!

19 After Sales Service ContiLift Distributor & Workshop Network

20 ContiLift OÜ Männimäe, Pudisoo küla, Kuusalu vald, Harju maakond, 74626, Estonia/EU Central Phone: (0) * Mobile: (0) info@contilift.com * eos@eos-enviro.com Website: & Registry Code: at Tartu County Court Dealer: