" FAT " KICKER FREESTYLE MOTOCROSS JUMP UNIT FMX UNIT MOTORCYCLE PRODUCTS

Transcription

1

2 FMX This FMX ramp series is supervised by representative FMX rider of Japan "DAICE," who is growing to be the ramp meister of the world. FREESTYLE MOTOCROSS JUMP UNIT " FAT " KICKER The best kicker developed by "DAICE," who has built many kickers for his FMX riding and practices. It is easy to jump and is safe. Split type kicker is easy to assemble and disassemble in a short time. Very compact when it is disassembled, and saves space for storage. The riding surface is made of expanded metal to provide a stable runway condition, even in rainy and muddy conditions. We can construct a custom kicker for you, such as flair and super kickers. 2

3 FMX TEAM MX-VIRUS " DAICE " Japan Freestyle Motocross Rider Representative veteran FMX rider of Japan, DAICE Daisuke Suzuki. He is not only a famous FMX rider in the world, but also a FMX kicker and landing builder. He designed all the kickers used in the 2014 Red Bull X Fighters in Osaka, Japan. "FAT" LANDING Construct a FMX landing without using a lot of dirt. Split type landing can be built and disassembled in short time. Developed with DAICE, this landing has the best landing angle, durability and safety. The landing surface is made of steel board covered with urethane mat. This provides better grip and safe landing at the event, even in rainy conditions. Under development Height - up kit 1 m Higher height runaway to get more audiences at the event. Provides 1 m runaway to give more FMX riding and event satisfactions. 3

4 Up to 44 start gates GATE Real starting gate for motocross racing. Up to 44 start gates can be operated. Available starting gates for temporary or permanent use. Easy to lift up the gate because of less friction design. Comes with 2 extra lift up pipes to assist in gate lifting, even in muddy condition. One step on the pedal to drop the gate. Optional starting gates box and optional remote control Available. CONTROL UNIT HIDEOUT ( W5288 ) Easy to disassemble for storage. 4

5 GATE LINE UP STARTING GATE RACE-1 - Kit comes with 1 starting unit, 2 gates and 3 lifting poles. - Original design of gate unit makes easy and safe lifting of start gate by only one person. - Step on to drop gate. - Height of the gate can be adjusted. - Wide mount type for temporary use. - Nail peg only at the installation. - The ground and the frame of a step = 5 cm. W : 3.0 m W5210 1ST CONTROL UNIT WITH 2 GRID W : 2.0 m W5212 1ST ADDITIONAL UNIT-2 W : 3.0 m W5213 1ST ADDITIONAL UNIT-3 STARTING GATE RACE-2 - Kit comes with 1 starting unit, 2 gates and 3 lifting poles. - Original design of gate unit makes easy and safe lifting of start gate by only one person. - Step on to drop gate. - Height of the gate can be adjusted. - Narrow mount type for permanent use. - Embedding the frame on the ground, does not occur a step. W5220 1ST CONTROL UNIT WITH 2 GRID OPTION W : 3.0 m W : 2.0 m W5222 1ST ADDITIONAL UNIT-2 W : 3.0 m W5223 1ST ADDITIONAL UNIT-3 W5289 RACE OPTIONAL REMOTE CONTROL KIT - Gate drop operation system from the back. - Gate-and-drop operation from the rider of the blind spot. - Does not require installation of the cabin for the starter in this system. - Gate drop by pulling hard. W5288 RACE OPTIONAL HIDEOUT W:1.0m - Steel frame + 4 mm PP plate three-piece structure already completed. - Three-piece structure already completed. - Left and right panels are bolted to the front panel. - 5 minutes installation and 5 minutes removal. 5

6 GATE Start practice machine, can be used with up to 6 riders. Gate for start practice. Easy to operate, pull lever drop the gate. 890 mm 630 mm W5010 TEAM GATE - Motocross start practice machine. - Comes with starting lever to drop the gate. - Gate height can be adjusted. - Gate lifting pole is included. - Comes with 4 pegs to fix the starting gate on the grand. - Can be used with up to 5 additional gates mm (mm) : Silver : W1000 x D 420 : 12 kg 420 mm Easy to lift gate with lifting pole. W5012 TEAM GATE Additional gate - Optional gate use with W5010 TEAM GATE. - Gate height can be adjusted. - Comes with 4 pegs to fix the starting gate on the grand. (mm) : Silver : W1000 x D 420 : 9 kg W5010 comes with control Unit. Gate angle can be adjusted. Comes with 1 linking plate on W5010, 2 linking plates on W

7 TOOL / TIRE E1410 MOUSSE CHANGER - Tire changer designed for mousse tire change and easy bead removing. - Long bead breaker plate to easily push mousse tire down. - Long operation handle makes bead breaking easy, gives you enough space for tire levers between wheel rim and tire bead. - Comes with tire lever holder and tire changer fixed holes. - Can be used with wheel axle shaft size 20 mm - 22 mm and 25 mm - 26 mm, wheel size from 18 inch to 21 inch. - Foldable design saves space in your garage or in your race van. - Durable steel frame holds wheel during tire change. Folding : W800 x D960 x H590 (mm) : W140 x D960 x H590 (mm) : 13.5 kg 20 mm~ 25 mm~ The shaft is able to turn upside down to fit to the bearing inner diameter of each bikes. Not only changing mousse, but also can be used for standard tire changes. Mousse changes Bead breaking Comes with tire lever hook. Can be used tire size from 18 to 21 inches by changing bead breaker positions. - Bead breaker height position adjustable holes. - Upper hole : Mousse change - Lower hole : Bead breaking Compact design, save your space in your garage or in your race van. 7

8 TOOL / TIRE E1250 PORTABLE TIRE CHANGER - Portable tire changer. - It can be used for wheels with an axle shaft of 17 mm or more. - Work can be done while rotating the wheel on the changer. - Foldable and compact when storing. : W770 x D770 x H (mm) : 5 kg Shaft diameter 16 mm Tapered cone holds the wheel firmly. Folding 4 stage height adjustable system ( 575 mm mm ) Tire lever pocket equipment. Tapered cone is used to minimize rattling. Includes a gauge to check bending of the rim and disk. E1258 PORTABLE TIRE CHANGER OPTION. BEAD BREAKER : Width Depth 770 x Height (mm) E1259 PORTABLE TIRE CHANGER OPTION. Ring / 12 mm Shaft - Ring and shaft set can be used for wheel of 12 mm or more of axle shaft diameter. - Ring diameter 300 mm. 8

9 TOOL / TIRE Shaft diameter 14 mm 720 mm mm E1260 TIRE CHANGER PRO - 5 stage height adjustable system 50 mm increments (720 mm mm) - Can be used for wheels with axle shaft of 15 mm or more. (Full size and trail, most of all fits racers) - Ring diameter 350 mm (compatible to wheel of 16 inches or more) - Equipped with tire lever pocket. - Cone prevents play and rattling Tire lever holder include. 5 stages height adjustable system 50 mm increments. ( 720 mm mm ) : W750 x (mm) : 7 kg P2620 BEAD BREAK KEEPER - Break bead on both sides at once and keep that portion. Length : 450 mm : 1.2 kg 9 Length E1364 PIVOT POINT BEAD BREAKER : 470 mm : 850 g - Fits each brand ring type tire change stand. - Hook the U shape on the ring and push down the handle to break the bead. - The fulcrum position is adjustable and fits various tire sizes.

10 TOOL / TIRE E1201 TIRE CHANGER - Tire changer stand for motorcycle tire changes. - Holds your wheels secure during your tire removing and installing on your wheel. - Comes with wheel rotating knob hold your wheel during your tire changes. - Wheel holding corn keeps your wheel in position. - Shaft size : 16 mm : W500 x D500 x H320 (mm) : 4.6 kg E1210 TIRE CHANGER w/bead BREAKER - Tire changer stand comes with bead breaker. - Easy to brake a bead with long operation bead breaker handle. - Great to use for mousse tire changes. - Bead breaker makes room for tire levers between tire bead and wheel rim, easy to stick your tire levers. - Bead breaker plate can be adjust its position to fit most motorcycle tires. - Usable for wheel size up to 21 inch. - Shaft size : 16 mm P2620 BEAD BREAK KEEPR P8 E1364 PIVOT POINT BEAD BREAKER P9 E1301 OPTION FOOT KIT for E12xx TIRE CHANGER : W500 x D760 x H320 (mm) : 6.6 kg E1010 TIRE BEAD BREAKER STD - Heavy-duty tire bead breaker. - Long operation handle make bead breaking easy. - Wide bead breaker plate is designed for breaking wider bead breaking with one operation. - Rubber plate protects your tire and rims from scratches during bead breaking. - T shape body provides better stability. - Can be used for tire sizes from 15 to 21 inches. : W620 x D210 x H385 (mm) : 4 kg E1020 TIRE BEAD BREAKER COMPACT - Compact size bead breaker, saves space in your garage and is easy to carry. - Long operation handle make bead breaking easy. - Rubber plate protects your tire and rims from scratches during bead breaking. - Can be used for tire sizes up to 18 inches. : W530 x D50 x H210 (mm) : 3 kg 10

11 TOOL / TIRE P260x BEAD HOLDER - Convenient tool to keep the bead push down when assembling tires. - 2 Lineup : Handle type with easy insertion and compact type optimum for carrying. P2602 BEAD HOLDER Compact : L105 x W25 x H35 (mm) : 95 g P2604 BEAD HOLDER : L210 x W28 x H35 (mm) : 186 g P2610 TIRE BEAD LIFTER - Keep the bead open when replacing a tube. - Work smoothly for even hard beads. : L275 x W80 x T6 (mm) : 267 g 11

12 TOOL / SUSPENSION P2210 FORK OILSEAL REMOVER - Using the principle of leverage, the fork seal removal tool makes removing fork seals easy. - Won t scratch your front fork body. * Do not reuse oil seal. : L 200 mm : 143 g 200 mm 71 mm P2310 DUSTSEAL REMOVER - Dust seal remover for front fork dust seal. - Easily remove dust seal without damaging front fork outer tube. : L 168 mm : 93 g P2510 BEARING REMOVER - Impact bearing remover, great to use for removing motorcycle wheel bearings. - Will not hurt your hand by hammer because of its off set handle design. - Off set bearing hammer head for secure bearing hammering. : W120 x T335 (mm) : 217 g 12

13 TOOL / SUSPENSION FORK TOP CAP WRENCH - Wrench for removing front fork cap. - 2 wrench sizes available, 49 mm for KYB and 50 mm for SHOWA and 50 mm KTM WP front fork. - Open wrench design for easy operation in small spaces. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - Socket hole available for torque wrench. ( Socket size is 9.5 sq = 3 / 8 inch ) - Made of durable steel, electrodeposition coating finish. : L 215 mm : g STEERING STEM WRENCH - Wrench for steering stem nut. - Can be used for all off-road and road bikes. - Precision laser cut for accurate fit on most steering stem nut. - 6 mm thickness to access stem nut without removing top triple clamp. - Stem wrench to use with 3/8 drive ratchet wrench available. KYB (49 mm) SHOWA (50 mm) WP ( 50 mm ) P3004 P3005 P3003 Bike Year F-Fork CRF450R YZ125/ YZ250F YZ450F YZ250X YZ250FX P3004 YZ125X 17 KYB ( 49 mm ) YZ450FX WR250F WR450F KX450F RMZ CRF250R CRF450R CRF450RX 17 CRF250X CRF450X KX250F KX450F RM RM RMZ RMZ RMX450Z DRZ400SM P3005 SHOWA ( 50 mm ) Bike Year F-Fork SX SX(AIR) SX/SX-F SX/SX-F(AIR) SX-F P SX-F(AIR) WP ( 50 mm ) 450SX-F SX-F(AIR) XC /300XC XC-F P3220 P3210 3/8DR 49 mm 48 mm 47 mm 46 mm E7310 FRONT FORK STAND - Front fork stand, holds your front fork during your front fork maintenance. - Rubber coating finish where front forks are held, to prevent damage to your front forks. P3505 PIPE CLAMP SET - Front fork inner tube clamp set. - Hold your front fork tight to remove axle bracket. - Can be used with inner fork sizes from 46 mm to 49 mm. - Made of aluminum, to prevent damage to your front fork inner tube. : W290 x L500 x H530 (mm) : 4.2 kg : Silver : Aluminum : W80 xh 80 x T80 (mm) : 1.06 kg 13 *Please hold clamp with vice securely. *Hold the front fork tight to remove lower bracket.

14 TOOL / SUSPENSION MONO SHOCK TWIN SHOCK P1124 SPRING COMPRESSOR L - Spring compressor for mono shock suspensions. - 2 hooks hold the spring secure, and compress spring by tightening nuts. - Easily remove spring from suspension body. - Designed for easy use with vice. - : 673 g P1122 SPRING COMPRESSOR S - Spring removal tool for twin shock motorcycles. - 2 spring hooks hold the springs secure while compressing the springs, making it easy to remove the springs from the shock bodies. - :473 g SHOCK SPANNER WRENCH - Preload spanner wrench make easy to adjust your spring preload on your suspension. - Wrench size available for common preload nuts. - Available 3 different wrenches. SHOCK SPANNER WRENCH 3/8DR - Spanner wrenches use with 3/8 drive ratchet wrench. - Can be used with torque wrench for secure preload nut tightening torque. - Available 2 wrench sizes, 72 mm and 82 mm. Wrench size Thickness Length M L W P3412 P3414 P3440 M L W : 72 mm : 5 mm : 240 mm :192 g Wrench size Thickness Length : 82 mm : 5 mm : 255 mm : 205 g Wrench size Thickness Length : 72 mm / 82 mm : 5 mm : 280 mm : 241 g M Wrench size Thickness Length M P3402 : 72 mm : 5 mm : 100 mm : 82 g L Wrench size Thickness Length L P3404 : 82 mm : 5 mm : 90 mm : 76 g P6010 SHOCK PUNCH - Hammering rod to loosen or tighten suspension preload adjuster. - Designed for easy to access / hit preload adjuster. : L 265 mm : 156 g 14

15 TOOL / SUSPENSION A Bracket type B Loop type P131x SUSPENSION PROP BAR - Installed as an alternative during rear suspension overhaul. - Movable without rear suspension. - Range length 320 mm to 480 mm without notched increments. - Loop type and Bracket type. Adjustable range Up to 304 mm mm A Type Upper bolt hole U-shaped outer U-shaped inner P1310 :Bracket type :Diameter M11 :Diameter 31 mm :Diameter 23 mm :1.04 kg B P1312 Type :Loop type Upper bolt hole :Diameter M11 :1.05 kg B A Piston rod M10XP1.0 M12XP1.25 P3031 FORK ROD PULLER - A tool to pull up the piston rod of the front fork. - It can also be used as a bleeding rod. Length : M10XP1.0, M12XP1.25 : 350 mm : 91 g P1330 SAG MATE - Tool to measure sag, able to check the scale by yourself. - Set this tool on your rear fender and axle shaft to measure accurate sag. - Allows you to measure sag quick and easy. - Get your best sag at your garage and track side. - Compact design for save your storage space. : 269 g 15

16 TOOL / SUSPENSION H Bike Year Part # CR125R P P3043 CR250R 91,95-96 P3042 CR500R P3042 CRF450R P3042 XR P3041 KX80/ P3041 KX P3041 KX P3042 K KX P P P3043 KX250F P3043 KX P3042 KLX250 /D-TRACKER P3041 Bike Year Part # YZ80/ P3041 YZ P3041 P3042 YZ P3041 P3042 YZ250F P P3042 YZ400F P3041 YZ426F P3041 Y YZ450F P3041 P3042 WR250F P P3042 WR400F P3041 WR426F P3041 WR450F P P3042 WR250R/X P3041 TRICKER P3045 S RM-Z P P3042 P304x FORK CARTRIDGE HOLDER HOOK - By removing the cylinder cartridge of the front fork, the internal oil can drain completely. - Mini to full size motocrosser, compatible with current trail model. Length : 350 mm : A = 344 g : B = 510 g : C = 326 g : D = 311 g : E = 313 g P mm / 30 mm (Designated) P mm / 38 mm (Designated) 27 mm 30 mm 34 mm 38 mm 10.5 mm 4.6 mm 14 mm 30 mm P3043 Hex 19 / Hex 22 (Universal) P3044 Hex 24 / Hex 27 (Universal) P3045 Hex 29 / Arrowhead (Universal) 26 mm 19 mm 22 mm 24 mm 27 mm 29 mm 16 30

17 TOOL / TIRE Off set wrench design A B P370x REAR SPROCKET WRENCH - Designed to easily loosen and tighten rear sprocket nuts. - Offset wrench design for easy to access sprocket nuts. - Chamfering finish on wrench hole side for smooth operation. - Width 300 mm x Thickness 0.5 mm Length : 300 mm : g Part # ( mm ) A P , 13 B P C P D P E P C D E F G H P371x REAR SPROCKET WRENCH 3/8DR - Sprocket wrench to use 3/8 drive ratchet torque wrench. - Designed to easily and tighten rear sprocket nuts. - Offset wrench design for easy to access sprocket nuts. - Chamfering finish on wrench hole side for smooth operation. - When using a torque wrench, please correct the change in tightening torque according to the length of the handle by the following calculation formula. - As shown in the illustration, please set so that this product and torque wrench are in line. Part # ( mm ) F P G P H P Length : 140 mm : g L = Torque wrench effective length T = specified torque by manufacturer. Tt = reading of the torque wrench P3105 FRONT AXLE WRENCH 19 mm - 19 mm hex tool that is convenient for off the front wheel. - Pushing in the axle shaft enables quick work. Length : 140 mm : 230 g 17

18 STD LIGHT WEIGHT FRONT STEEL SPROCKET - Front sprockets for most models available. - Black zinc surface finish for less Corrosion. Put your tooth count on "XX" to complete your sprocket part number. STD HONDA Year Part # Tooth* CR50/ K1303-XX 13,14,15 CR80R K1303-XX 13,14, K1308-XX 13,14,15 CR85R K1308-XX 13,14,15 CR125M K1408-XX 13,14,15,16, K1507-XX 13,14 CR125R K K1545-XX 12, K1549-XX 12,13,14 CR250M K1504-XX 13, K CR250R K K1539-XX 13,14 CR450/480/500R K CR500R K K1539-XX 13,14 CRF110F K1303-XX 13,14,15 CRF125F K1402-XX 13,14 CRF150F/230F K1508-XX 12,13,14 CRF150R K1307-XX 14,15,16 CRF250R/X K1549-XX 12,13,14 CRF450R K1539-XX 13,14 CRF450RX K1539-XX 13,14 CRF450X K1539-XX 13,14 EZ K1409-XX 14,15 RTL K1506-XX 11,12,13 CRF250L/M/Rally K1521-XX 13,14 CRM50/ K1303-XX 13,14,15 CRM250R K1542-XX 13,14 CRM250R/AR K1543-XX 13,14,15 CT250SILKROAD K1518-XX 12,13,14 FMX K1534-XX 14,15 FTR K1508-XX 12,13,14 FTR K1507-XX 13, K1508-XX 12,13,14 MR K1504-XX 13,14 MT K1408-XX 13,14,15,16,17 MT K1504-XX 13,14 MTX50R/80R K1303-XX 13,14,15 MTX125R K1409-XX 14,15 MTX200R K1507-XX 13,14 NX K1409-XX 14,15 NX K1518-XX 12,13,14 NX650 DOMINATOR K1534-XX 14,15 SL K1409-XX 14,15 SL K1508-XX 12,13,14 SL K1519-XX 13,14,15 SLR K1534-XX 14,15 TL K1409-XX 14,15 TLM200/ K1506-XX 11,12,13 TLM240/ K1506-XX 11,12,13 TLM K1506-XX 11,12,13 TLM K1303-XX 13,14,15 TLR K1506-XX 11,12,13 TLR K1507-XX 13,14 XL50S/80S K1303-XX 13,14,15 XL125K/125S/125R K1409-XX 14,15 XL K1504-XX 13,14 XL200R K1507-XX 13,14 XL K1508-XX 12,13,14 XL250 DEGREE K1521-XX 13,14 XL250K/250S K1519-XX 13,14,15 XL250R K1518-XX 12,13,14 XL400/500/600S/R K1518-XX 12,13,14 XLR K1303-XX 13,14,15 XLR K1408-XX 13,14,15,16,17 XLR K1508-XX 12,13,14 XLR K1508-XX 12,13,14 XLR250/BAJA(MD20/22) K1408-XX 13,14,15,16,17 XLR COMBART K1508-XX 12,13,14 XLX K1505-XX 13,14 XR50/100MOTARD K1303-XX 13,14,15 XR50/CRF50F K1308-XX 13,14,15 XR K1303-XX 13,14,15 XR70R/CRF70F K1308-XX 13,14,15 XR75/80R/CRF80F K1303-XX 13,14,15 XR100/R/CRF100F K1403-XX 14,15 XR125L K1408-XX 13,14,15,16,17 XR K1507-XX 13,14 XR230/M K1508-XX 12,13,14 XR250/BAJA/MOTARD (MD30) K1521-XX 13, K1519-XX 13,14,15 XR K1518-XX 12,13, K1507-XX 13,14 XR250R (ME06) K1508-XX 12,13,14 XR250R (ME08) K1521-XX 13,14 XR350R K1505-XX 13, K XR400MOTARD K1543-XX 13,14,15 XR400R K1543-XX 13,14,15 XR500/ K1518-XX 12,13,14 XR600R K1527-XX 14,15 XR650L K1527-XX 14,15 XR650R K1529-XX 14,15 ATC200X K1507-XX 13,14 ATC250R K ATC K TRX K1504-XX 13,14 TRX250R K TRX K1527-XX 14, K1539-XX 13,14 Z50R K1303-XX 13,14,15 CB K1409-XX 14,15 CB K1504-XX 13,14 CB223S K1508-XX 12,13,14 CBF K1521-XX 13,14 CL K1504-XX 13,14 FX K1534-XX 14,15 GB K1505-XX 13,14 NSR K1303-XX 13,14,15 REBEL K1505-XX 13,14 STD GASGAS Year Part # Tooth* GASGAS125EC K1535-XX 13,14,15 GASGAS200/250/350/400/ K STD STD YAMAHA Year Part # Tooth* TTR K1304-XX 12,13,14,15 TTR K1304-XX 12,13,14,15 TTR K1304-XX 12,13,14,15 TTR K1406-XX 13,14,15,16 TTR K MX K1404-XX 13,14,15 MX/YZ K1404-XX 13,14,15 YZ K1301-XX 12,13,14,15 YZ K1304-XX 12,13,14, K1301-XX 12,13,14,15 YZ K1401-XX 13, K1404-XX 13,14,15 YZ K1412-XX 13,14,15, K1501-XX 12,13 YZ K1535-XX 13,14, K1548-XX 12,13,14 YZ125X K1548-XX 12,13,14 YZ K1501-XX 12,13 YZ K1513-XX 13,14,15, K1530-XX 12,13,14 YZ250X K1530-XX 12,13,14 YZ250F K1548-XX 12,13,14 YZ250FX K1548-XX 12,13,14 YZ400F K1530-XX 12,13,14 YZ426F K1530-XX 12,13,14 YZ450F K1530-XX 12,13,14 YZ450FX K1530-XX 12,13,14 WR K1535-XX 13,14,15 WR K1535-XX 13,14,15 WR250F K1548-XX 12,13,14 WR250R/X K1548-XX 12,13,14 WR250Z K1513-XX 13,14,15, K1530-XX 12,13,14 WR400F K1530-XX 12,13,14 WR426F K1530-XX 12,13,14 WR450F K1530-XX 12,13,14 AG K1406-XX 14,15,16 AT1/AT K1404-XX 13,14,15 BW K1501-XX 12,13 BW K1501-XX 12,13 CT1/CT K1404-XX 13,14,15 DT1/DT K1530-XX 12,13,14 DT K1404-XX 13,14, K1405-XX 13,14,15,16 DT125R K1412-XX 13,14,15,16 DT125R 520COMBART K1535-XX 13,14,15 DT200R K1412-XX 13,14,15,16 DT200R 520COMBART K1535-XX 13,14,15 DT200WR K1535-XX 13,14,15 DT230LANZA 520COMBART K1535-XX 13,14,15 DT230LANZA K1412-XX 13,14,15,16 DT K1530-XX 12,13,14 DT50LW(17W) K1304-XX 12,13,14,15 DT K1404-XX 13,14,15 FT K1301-XX 12,13,14,15 GT50/ K1301-XX 12,13,14,15 HT1/HT K1404-XX 13,14,15 IT K1501-XX 12,13 IT K1501-XX 12,13 JT K1301-XX 12,13,14,15 PW K1304-XX 12,13,14,15 RT1/RT360/DT K1530-XX 12,13,14 SEROW K1406-XX 14,15,16 SEROW K1415-XX 13,14,15 TDR K1412-XX 13,14,15,16 TDR K1530-XX 12,13,14 TDR50/ K1405-XX 13,14,15,16 TT K1515-XX 14,15 TT250R K1550-XX 13,14 TT250RAID 520COMBART K1550-XX 13,14 TT K1515-XX 14,15 TT K1530-XX 12,13,14 TT K1515-XX 14,15 TW K1410-XX 14,15 TW200/ K1410-XX 14,15 TY K1404-XX 13,14,15 TY K1404-XX 13,14,15 TY250S/R K1512-XX 11,12 TY250Z K1535-XX 13,14,15 TY350R K1512-XX 11,12 TY50/ K1301-XX 12,13,14,15 XG250 TRICKER K1415-XX 13,14,15 XT125R/X K1405-XX 13,14,15,16 XT250T K1552-XX 13,14,15 XT250X K1415-XX 13,14,15 XT K1515-XX 14,15 XT K1530-XX 12,13,14 XT600TENERE K1515-XX 14,15 XTZ K1406-XX 14,15,16 XTZ660TENERE K1534-XX 14,15 XTZ750 SUPERTENERE K YFS200 BLASTER K BRONCO K1406-XX 14,15,16 FS K1301-XX 12,13,14,15 FZ400R K1515-XX 14,15 MT K1534-XX 14,15 RZ K1405-XX 13,14,15,16 TA K1404-XX 13,14,15 TZR K1405-XX 13,14,15,16 XJR K1515-XX 14,15 YSR50/ K1301-XX 12,13,14,15 KTM Year Part # Tooth* K1306-XX 12,13,14 85SX K1411-XX 13,14 125SX K1537-XX 12,13,14,15 125EXC K1537-XX 12,13,14,15 125XC-W K1537-XX 12,13,14,15 150SX K1537-XX 12,13,14,15 150XC K1537-XX 12,13,14,15 150XC-W K1537-XX 12,13,14,15 200EXC K1537-XX 12,13,14,15 200XC-W K1537-XX 12,13,14,15 250SX K1537-XX 12,13,14,15 250EXC K1537-XX 12,13,14,15 250XC K1537-XX 12,13,14,15 250XC-W K1537-XX 12,13,14,15 250SX-F K1537-XX 12,13,14,15 250EXC-F K1537-XX 12,13,14,15 250XC-F K1537-XX 12,13,14,15 250XCF-W K1537-XX 12,13,14,15 300EXC K1537-XX 12,13,14,15 300XC K1537-XX 12,13,14,15 300XC-W K1537-XX 12,13,14,15 350SX-F K1537-XX 12,13,14,15 350EXC-F K1537-XX 12,13,14,15 350XC-F K1537-XX 12,13,14,15 350XCF-W K1537-XX 12,13,14,15 450SX-F K1537-XX 12,13,14,15 450EXC K1537-XX 12,13,14,15 450XC-F K1537-XX 12,13,14,15 450XC-W K1537-XX 12,13,14,15 500EXC K1537-XX 12,13,14,15 500XC-W K1537-XX 12,13,14,15 530EXC K1537-XX 12,13,14,15 530XC-W K1537-XX 12,13,14,15 FREERIDE250R K1537-XX 12,13,14,15 FREERIDE K1537-XX 12,13,14,15 690ENDURO/R K1538-XX 14,15,16 690DUKE/SMC/R K1538-XX 14,15,16 HUSQVARNA Year Part # Tooth* TE250/350/400/510/ K1551-XX 12,13,14,15,16 WR K1551-XX 12,13,14,15,16 WR K1551-XX 12,13,14,15,16 TC K1306-XX 12,13,14 TC K1411-XX 13,14 TC125/ K1537-XX 12,13,14,15 FC250/350/ K1537-XX 12,13,14,15 TE K1537-XX 12,13,14,15 TE K1537-XX 12,13,14,15 TE250/ K1537-XX 12,13,14,15 FE250/350/450/ K1537-XX 12,13,14,15 TX K1537-XX 12,13,14,15 TX K1537-XX 12,13,14,15 FX350/ K1537-XX 12,13,14, ENDURO K1538-XX 14,15,16 18 STD KAWASAKI Year Part # Tooth* KX60/ K1304-XX 12,13,14,15 KX80/85/ K1304-XX 12,13,14, K1405-XX 13,14,15,16 KX K1501-XX 12, K1509-XX 12,13,14, K1514-XX 13,14 KX K1513-XX 13,14,15, K1530-XX 12,13,14 KX250F K K1547-XX 12,13,14 KX K1514-XX 13,14 KX450F K1530-XX 12,13,14 KX K1514-XX 13, K1513-XX 13,14,15,16 KLX450R K1530-XX 12,13,14 125TR/175TR K TR (F11) 520COMBART K TR K1533-XX 14,15 350TR(F5) 520COMBART K AE50/ K1302-XX 12,13,14,15 D-TRACKER/X K1532-XX 13,14,15 D-TRACKER K1416-XX 13,14 KD K1405-XX 13,14,15,16 KD K1405-XX 13,14,15,16 KD K1405-XX 13,14,15,16 KD K1405-XX 13,14,15,16 KDX125SR K1405-XX 13,14,15,16 KDX K1501-XX 12,13 KDX K1501-XX 12, K1513-XX 13,14,15,16 KDX200R K1513-XX 13,14,15,16 KDX200SR K1513-XX 13,14,15,16 KDX220R K1513-XX 13,14,15,16 KDX220SR K1513-XX 13,14,15,16 KDX K1514-XX 13,14 KDX250R K1513-XX 13,14,15,16 KDX250SR K1513-XX 13,14,15,16 KDX K1514-XX 13,14 KDX K1514-XX 13,14 KDX K1514-XX 13,14 KE90/ K1405-XX 13,14,15,16 KE K1405-XX 13,14,15,16 KL K1513-XX 13,14,15,16 KLE K1533-XX 14,15 KLE K1533-XX 14,15 KLE K1533-XX 14,15 KLR K1533-XX 14,15 KLR K1533-XX 14,15 KLR650R K1533-XX 14,15 KLT K1514-XX 13,14 KLT K1514-XX 13,14 KLX K1302-XX 12,13,14,15 KLX K1416-XX 13,14 KLX K1532-XX 13,14,15 KLX250R K1513-XX 13,14,15,16 KLX250SR/ES K1513-XX 13,14,15,16 KLX300R K1513-XX 13,14,15,16 KM90/ K1405-XX 13,14,15,16 KMX K1405-XX 13,14,15,16 KMX K1405-XX 13,14,15,16 SUPERSHERPA K1513-XX 13,14,15,16 KXT K1514-XX 13,14 A1 520COMBART K SS 520COMBART K AR50/ K1302-XX 12,13,14,15 AR K1405-XX 13,14,15,16 BJ K1533-XX 14,15 CS K1533-XX 14,15 EN K1533-XX 14,15 EX K1533-XX 14,15 GPX400R K1533-XX 14,15 GPZ400R K1533-XX 14,15 GPZ K1533-XX 14,15 KH COMBART K KR K1533-XX 14,15 KV K1301-XX 12,13,14,15 NINJA250/R K1532-XX 13,14,15 NINJA250SL K1532-XX 13,14,15 NINJA650/R K1530-XX 12,13,14 Z K1532-XX 13,14,15 Z250SL K1532-XX 13,14,15 ZX6R K1529-XX 14,15 ZXR K1533-XX 14,15 STD SUZUKI Year Part # Tooth* DRZ K1401-XX 13,14 DRZ K1413-XX 14,15,16 JR K1301-XX 12,13,14,15 JR K1401-XX 13,14 RM K1401-XX 13, K1404-XX 13,14,15 RM K1404-XX 13,14,15 RM K1404-XX 13,14,15 RM COMBART K1544-XX 12,13 RM K1414-XX K1544-XX 13,14 12,13 RM K1552-XX 13,14, K1523-XX 12,13,14, K RMZ K1544-XX 12, K1524-XX 13,14 RMZ K1540-XX 13, K1541-XX 13,14 RMX450Z K1541-XX 13,14 250SB K1532-XX 13,14,15 DF K1413-XX 14,15,16 DF K1525-XX 14,15 DJEBEL K1413-XX 14,15,16 DJEBEL K1525-XX 14,15 DJEBEL K1523-XX 12,13,14,15 DR/SP K1526-XX 13,14 DR/SP K1526-XX 13,14 DR125S K1414-XX 13,14 DR250R K1523-XX 12,13,14,15 DR250S/350S K1523-XX 12,13,14,15 DR400/ K1526-XX 13,14 DR K DR650RSE K DR K DR K DRZ400R/E/S/SM K1523-XX 12,13,14,15 OM K1301-XX 12,13,14,15 PE K1552-XX 13,14,15 PE K1552-XX 13,14,15 RA K1404-XX 13,14,15 RH K1523-XX 12,13,14,15 RMX250R K1523-XX 12,13,14,15 RMX250S K1523-XX 12,13,14,15 SP400/ K1526-XX 13,14 SX K1413-XX 14,15,16 SX K1523-XX 12,13,14,15 TM K1404-XX 13,14,15 TM COMBART K1509-XX 12,13,14,15 TM COMBART K1509-XX 12,13,14,15 TS K1301-XX 12,13,14,15 TS50W K1305-XX 12,13,14 TM K1301-XX 12,13,14,15 TS K1404-XX 13,14,15 TS K1404-XX 13,14,15 TS125R 520COMBART K TS125R K1405-XX 13,14,15,16 TS200R K TS COMBART K1509-XX 12,13,14,15 TS COMBART K1523-XX 12,13,14,15 TS COMBART K1509-XX 12,13,14,15 LT K1404-XX 13,14,15 LT K1523-XX 12,13,14,15 AC K1301-XX 12,13,14,15 DS COMBART K1523-XX 12,13,14,15 GN K1414-XX 13,14 GN K1526-XX 13,14 GN K1526-XX 13,14 GS K1414-XX 13,14 GT COMBART K1509-XX 12,13,14,15 OR K1301-XX 12,13,14,15 RG K1305-XX 12,13,14 RG K RV K1301-XX 12,13,14,15 RV K1404-XX 13,14,15 RV K1404-XX 13,14,15 TU250 GRASSTRACKER K1526-XX 13,14 VANVAN K WOLF K

19 WHEEL LIGHT WEIGHT Bike Year Part# Tooth CR125R K L 13 CR250R K L 13 CR500R K L 13 CRF150R K L 15 HONDA CRF250R K L 13 CRF250X K L 13 CRF450R K L 13 CRF450RX K L 13 CRF450X K L 13 TRX K L 13 TTR K1304-XXL 13,14 TTR K1304-XXL 13,14 TTR K1304-XXL 13,14 MX K1404-XXL 13,14 MX/YZ K1404-XXL 13,14 YZ K1304-XXL 13,14 YZ K1404-XXL 13,14 YZ K L 14 YZ K L 13 YZ125X K L 13 YZ K L 13 YZ250X K L 13 YZ250F K L 13 YZ250FX K L 13 YZ400F K L 13 YZ426F K L 13 YZ450F K L 13 YZ450FX K L 13 WR250F K L 13 WR250R/X K L 13 WR250Z K L 13 YAMAHA WR400F K L 13 WR426F K L 13 WR450F K L 13 AT1/AT K1404-XXL 13,14 CT1/CT K1404-XXL 13,14 DT1/DT K L 13 DT K1404-XXL 13,14 DT125R K L 14 DT200R K L 14 DT230LANZA K L 14 DT K L 13 DT50LW(17W) K1304-XXL 13,14 DT K1404-XXL 13,14 HT1/HT K1404-XXL 13,14 PW K1304-XXL 13,14 RT1/RT360/DT K L 13 TDR K L 14 TDR K L 13 TT K L 13 TY K1404-XXL 13,14 TY K1404-XXL 13,14 XT K L 13 TA K1404-XXL 13,14 KX60/ K1304-XXL 13,14 KX80/85/ K1304-XXL 13,14 KX K L 13 KAWASAKI KX250F K L 13 KX450F K L 13 KLX450R K L 13 NINJA650/R K L 13 RM K1404-XXL 13,14 RM K1404-XXL 13,14 RM K1404-XXL 13,14 RMZ K L 13 RMZ K L 13 RMX450Z K L 13 SUZUKI RA K1404-XXL 13,14 TM K1404-XXL 13,14 TS K1404-XXL 13,14 TS K1404-XXL 13,14 LT K1404-XXL 13,14 RV K1404-XXL 13,14 RV K1404-XXL 13,14 85SX K L SX K1537-XXL 13,14 125EXC K1537-XXL 13,14 125XC-W K1537-XXL 13,14 150SX K1537-XXL 13,14 150XC K1537-XXL 13,14 150XC-W K1537-XXL 13,14 200EXC K1537-XXL 13,14 200XC-W K1537-XXL 13,14 250SX K1537-XXL 13,14 250EXC K1537-XXL 13,14 250XC K1537-XXL 13,14 250XC-W K1537-XXL 13,14 250SX-F K1537-XXL 13,14 250EXC-F K1537-XXL 13,14 250XC-F K1537-XXL 13,14 KTM 250XCF-W K1537-XXL 13,14 300EXC K1537-XXL 13,14 300XC K1537-XXL 13,14 300XC-W K1537-XXL 13,14 350SX-F K1537-XXL 13,14 350EXC-F K1537-XXL 13,14 350XC-F K1537-XXL 13,14 350XCF-W K1537-XXL 13,14 450SX-F K1537-XXL 13,14 450EXC K1537-XXL 13,14 450XC-F K1537-XXL 13,14 450XC-W K1537-XXL 13,14 500EXC K1537-XXL 13,14 500XC-W K1537-XXL 13,14 530EXC K1537-XXL 13,14 530XC-W K1537-XXL 13,14 FREERIDE250R K1537-XXL 13,14 FREERIDE K1537-XXL 13,14 TC K L 14 TC125/ K1537-XXL 13,14 FC250/350/ K1537-XXL 13,14 TE K1537-XXL 13,14 HUSQVARNA TE K1537-XXL 13,14 TE250/ K1537-XXL 13,14 FE250/350/450/ K1537-XXL 13,14 TX125/ K1537-XXL 13,14 FX350/ K1537-XXL 13,14 GASGAS 200/250/350/400/ K L 13 Put your tooth count on "XX" to complete your sprocket part number. REAR STEEL SPROCKET - Durable steel motorcycle rear sprocket. - Electrophoretic or plate coating surface finish available. Bike Year Part# Tooth CR80R/85R K3401-XX 46,47,48,49,50,51,55,56,57 CRF150R K3401-XX 46,47,48,49,50,51,55,56,57 CR125R/250R CRF150F/230F CRF250R CRF450R K3402-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 CRF450RX 17 CRF250X/450X XR250R(ME06) K3403-XX 39,40,42,44,45,46,48 HONDA XR250R(ME08), XR400R K3402-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 XR600R,XR650L K3403-XX 39,40,42,44,45,46,48 XR650R K3402-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 CRM50/ K3401-XX 46,47,48,49,50,51,55,56,57 SL XR K3402-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 XR250/BAJA/MOTARD (MD30) K3402-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 CRF250L/M K3403-XX 39,40,42,44,45,46,48 CRF250RALLY K3403-XX 39,40,42,44,45,46,48 CRM250R K3403-XX 39,40,42,44,45,46,48 CRM250AR K3402-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 YZ80/ K3431-XX 46,47,48,49,50,51,52,53 YZ125/ K3451-XX 44,45,46,47,48,49,50,51 YZ125/ YZ250F-450F YZ125X 17 YZ250X YZ250FX K3452-XX 42,43,44,45,46,47,48,49,50,51,52 YZ450FX WR250F WR400F-450F WR K3451-XX 44,45,46,47,48,49,50,51 YAMAHA TDR50/ K3453-XX 49,54 TTR K3453-XX 49,54 XTZ K3453-XX 49,54 DT125R K3453-XX 49,54 DT125R/200R DT230LANZA K3454-XX 53,55,57 DT125R/200R DT230LANZA ( COMBART) * K3451-XX 44,45,46,47,48,49,50,51 DT200WR * TT250R * K3451-XX 44,45,46,47,48,49,50,51 TT250R RAID K3454-XX 53,55,57 TT250R RAID( COMBART)* K3451-XX 44,45,46,47,48,49,50,51 WR250R/X * K3452-XX 42,43,44,45,46,47,48,49,50,51,52 KX K3420-XX 46,47,48 KX80/85/ K3422-XX 49,50,51,52 KX125/ KX250F KX450F K3424-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 KLX450R KAWASAKI KLX125/D-TRACKER125 * KLX150S K3425-XX 44,47,49 KDX125SR K3426-XX 50,52,54 KDX125SR ( COMBART) KDX R/SR K3424-XX 39,40,41,42,43,44,45, KLX250/300R/SR/ES ,47,48,49,50,51,52,53 D-TRACKER RM80/ K3431-XX 46,47,48,49,50,51,52,53 RM125/ K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 RM-Z K3424-XX 39,40,41,42,43,44,45,46,47,48,49,50,51,52, K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 RM-Z K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 RMX450Z K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 TS125R( COMBART) K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 TS200R K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 SX125R,DJEBEL125,DF125,DR125 SUZUKI ( COMBART) SX200R, DJEBEL K DF200, DR200SE RMX250S/R K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 DR250S/DJEBEL K3433-XX 41,42,43,44,45,46,47,48,49,50,51,52 DR250R/DJEBEL250XC K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 DRZ400R K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 DRZ400S (JAPAN) K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51, K3433-XX 41,42,43,44,45,46,47,48,49,50,51,52 DRZ400S (US) K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 DRZ400SM * K3433-XX 41,42,43,44,45,46,47,48,49,50,51,52 DRZ400SM (US) K3432-XX 40,41,42,43,44,45,46,47,48,49,50,51,52 85SX K3477-XX 46,47,48,49,50 KTM SX/SXF/EXC/EXC-F /EXC-R/XC/XCW/SMR K3475-XX 38,39,40,41,42,43,44,45,46,47,48,49,50,51,52 HUSABERG FC/FE/FS K3475-XX 38,39,40,41,42,43,44,45,46,47,48,49,50,51,52 WR/CR/TE/TC/TXC/SM/SMR K3433-XX 41,42,43,44,45,46,47,48,49,50,51,52 HUSQVARNA TC K3477-XX 46,47,48,49,50 TC/TE/FC/FE/TX/FX K3475-XX 38,39,40,41,42,43,44,45,46,47,48,49,50,51,52 GAS GAS cc (EC/FSR MC SM) K3433-XX 41,42,43,44,45,46,47,48,49,50,51,52 *1 Tapered sprocket bolt is required. *2 Singapore and Japan models use. Put your tooth count on "XX" to complete your sprocket part number 19

20 TOOL / WHEEL By processing blank spokes ( straight spokes without bends ), you can create one-off spokes such as discontinued models that are difficult to find stock parts for and rim size changes. More than 200 kinds of spoke lengths are set from four wire diameters of 2.9 mm / 3.2 mm / 3.5 mm / 4.0 mm to correspond to various models. We will further expand the lineup of blank spokes in the future! P1010 SPOKE BENDER - Spoke bender makes your desired spoke bends. - Cross handles on both hands, to easily bend spokes. - Easy to set spoke on bender. It can be finely adjusted to spoke size and bend angle. - Length adjuster holds spoke at bending area. - Angle hold adjuster. Folding : W330 x D60 x H90 (mm) : 1.46 kg BLANK STAINLESS SPOKE - Base spokes for bending to the required spoke angle using spoke bender. - To accommodate various models line-up length in 2 mm increments. - Made of stainless steel, and is resistant to rust and offers a fine quality texture not found in plating. Length Thick Please put spoke outer diameter part number ( mm ) to *: 2.3 mm ( 3 ) / 3.2 mm ( 4 ) / 3.5 mm ( 5 ) / 4.0 mm ( 6 ) Part # Spoke outer diameter ( mm ) Spoke outer diameter ( mm ) Part # 2.3 (3) 3.2 (4) 3.5 (5) 4.0 (6) 2.3 (3) 3.2 (4) 3.5 (5) 4.0 (6) 80 DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* DC432-* STAINLESS NIPPLE - Made of stainless steel, and is resistant to rust and offers a fine quality texture not found in plating. - Nipple packed per 10 pcs. Outer diameter Screw Part # Screw Outer diameter ( mm ) DC436-10A1S BC DC436-10B1S BC DC436-10B2S BC DC436-10B3S BC DC436-10D1S BC DC436-10D2S BC DC436-10D3S BC DC436-10F3S BC DC436-10F4S BC The numerical value of the screw dimension represents the wire diameter of the blank spoke.

21 TOOL / WHEEL STAINLESS SPOKE / NIPPLE SET - Made of rust resistant stainless steel. - Spoke/nipple sets for motocross, enduro, super moto, dual sport, small and vintage bikes available. *COMING SOON HONDA ( FRONT ) Bike Year Part # CR80/85R DC CR80R2/85R DC CR125M DC DC * 79 DC * CR125R 80 DC * 81 DC * CR250M DC * CR250R DC * 81 DC * CR125R/250R/480R 82 DC * CR125R/250R/500R 83 DC DC * DC DC DC CR125R/250R DC CRF70F DC CRF80F DC * CRF150R DC CRF150R DC CRF250R/X DC CRF450R/X/RX DC CRF125F DC * CRF230F DC CRF250L DC CRF250M DC CRF1000L DC XR100R DC * DC * XR200R DC XR250/ DC * XR250R XR350R DC * DC DC DC DC XR400R DC XR650R DC XR250(MD30)/BAJA DC XR250M/400M DC CRM250R/AR DC XLX250R 83 DC * XLR200R DC XLR250R DC * XLR250R/BAJA DC XL200R DC * XL250S DC * XL250R DC * XL400R 82 DC * XL500S DC * SL DC * MT125 ELSINORE DC MT250 ELSINORE DC * TLM220R DC TL DC TLR DC TLR250R 86 DC * SUZUKI( FRONT ) Bike Year Part # RM DC RM85L DC RM DC DC * RM125/ DC * DC RM125/250/ DC * RM250/ DC DC * RM250/ DC RM250/ DC DC RM125/ DC DC RMZ DC DC RMZ DC RMX450Z DC DRZ125L DC DR250S/SE/SH/SHE DC DR250R DC DR650SE DC Djebel DR250RX DC SB DC RMX250R DC TS125R/200R DC DC DC * TS DC * DC TS DC DC * DC TM DC TM250/ DC KTM ( FRONT ) Bike Year Part # 65SX DC SX DC SX17inch DC SX17inch DC SX19inch DC SX19inch DC SX/EXC DC FREERIDE250R/ DC HONDA ( REAR ) Bike Year Part # CR80/85R DC CR80R2/85R DC CR125M DC * DC * 83 DC CR125R 89 DC DC DC CR250M DC * DC * 81 DC * CR250R 83 DC DC DC CR500R DC CR125R/250R/480R 82 DC * 84 DC * CR125R/250R/500R DC DC CR125R/250R 88 DC CR125R/250R/500R DC DC CR125R/250R DC DC CRF70F DC CRF80F DC * CRF150R DC CRF150R DC CRF250R DC CRF250X DC CRF450R DC CRF450X/RX DC CRF125F DC * CRF230F DC CRF250L DC CRF250M DC CRF1000L DC XR100R DC * XR200R DC XR DC * XR250R KTM ( REAR ) Bike Year Part # 65SX DC SX DC SX14inch DC SX16inch DC SX16inch DC SX/SX-F DC XC/EXC-F DC FREERIDE250R/ DC DC * DC DC DC XR350R DC XR400R DC XR DC * XR650R DC XR250(MD30)/BAJA DC XR250M/400M DC CRM250R/AR DC XLX250R 83 DC * XLR200R DC XLR250R DC * 87 DC * XLR250R/BAJA DC XL200R DC * XL250K3 73 DC * XL250S DC * 81 DC * XL250R 83 DC * XL400R/500R 82 DC * XL500S DC * SL DC * MT125 ELSINORE DC * MT250 ELSINORE DC * TLM220R DC * TL DC * TLR DC * TLR250R 86 DC * SUZUKI( REAR ) Bike Year Part # RM DC RM85L DC DC DC DC RM DC * DC * DC DC DC RM DC * RM250/ DC * 80 DC * DC * DC * RM DC DC RMZ DC DC DC RMZ DC RMX450Z DC DRZ125L DC DR250S/SE/SH/SHE DC DR250R DC DR650SE DC Djebel DR250RX DC SB DC RMX250R DC TS125R/200R DC TS DC * DC TS DC TM DC TM DC DC TM DC KAWASAKI ( FRONT ) Bike Year Part # KX DC KX80/ DC KX80II/85II DC KX DC DC * KX DC * DC * DC DC * KX DC DC KX250/ DC * KX125/ DC * 83 DC * KX125/250/ DC * 85 DC DC KX125/ DC DC KX DC KX250F DC KX250F/450F DC KLX125/150S DC KLX250R/SR DC KLX250/SR/ES DC KLX300R DC KLX650R DC D-TRACKER/X DC D-TRACKER DC KDX200SR DC KDX220SR DC KDX250R/SR DC KLR DC * KL DC * DC * KE DC * BobCat F6(125TR) DC Bison F11(250TR) DC BigHone F5(350TR) 72 DC BigHone F5(350TR) 73 DC * KT DC * YAMAHA ( FRONT ) Bike Year Part # YZ80/ DC YZ80LW/85LW DC YZ DC DC YZ DC YZ125/ DC * 83 DC * YZ125/250/ DC * YZ125/125X/250/250X DC YZ250F/FX DC YZ450F/FX DC WR250F DC WR450F DC TTR125LW/LWE DC * WR250R DC WR250X DC SEROW225/ DC XG250 TRICKER DC XT250X DC TT250R/RAID DC DT230LANZA DC TW200(USA) DC * XT660Z TENERE DC DT DC DT200R DC DT200WR DC XT DC * XT225/250(USA) DC XT DC * XT250T DC * XT400/ DC * XT DC * TT DC DC * IT DC * IT DC * CT DC CT175/CT DC DT1/DT2/DT DC DT1E DC DT DC * DT250/ DC DT250M/450M DC * RT1 70 DC RT1(RT360) DC RT1E DC DT DC * AT1M DC AT1MX 71 DC DT1MX DC DT2MX 72 DC RT1M/MX DC MX DC DC MX DC TY DC TY DC HUSQVARNA ( FRONT ) Bike Year Part # FC/TE DC KAWASAKI ( REAR ) Bike Year Part # KX DC KX DC KX80II/85II DC KX DC DC * DC * KX DC * 82 DC * KX DC DC * DC * DC * KX250/ DC * KX125/ DC * KX250/ DC KX125/250/500 KX125/ DC DC DC DC DC KX DC KX250F DC KX450F DC KLX125/150S DC KLX250/R/SR/ES DC KLX300R DC KLX650R DC D-TRACKER DC D-TRACKER/X DC KDX200SR DC KDX220R DC KDX220SR DC KDX250R DC KDX250SR DC KLR DC * KL DC * DC * KE DC * BobCat F6(125TR) DC Bison F11(250TR) DC BigHone F5(350TR) DC * KT DC YAMAHA ( REAR ) Bike Year Part # YZ80/ DC YZ80LW/85LW DC DC * YZ DC * DC * 83 DC * DC * YZ DC * 81 DC * 82 DC * YZ125/ DC DC DC YZ125X 17 DC YZ250X DC YZ250F DC YZ450F DC YZ250F/450F DC YZ250FX DC YZ450FX DC WR250F DC WR450F DC TTR125LW/LWE DC WR250R DC WR250X DC SEROW DC SEROW225W DC XG250 TRICKER DC XT250X DC TT250R/RAID DC DT230LANZA DC TW200(USA) DC * XT660Z TENERE DC DT DC * DT200R DC DT200WR DC XT125/200(USA) DC XT225(USA) DC XT250(USA) DC * DC XT250T DC * XT DC * XT500/ DC * TT DC * IT125/ DC * IT DC * IT DC * CT DC * CT175/CT DC * DT1/DT2/DT DC * DC * DT DC * DT250M DC * RT1/RT DC * DT DC * DT DC * DT400M DC * AT1M DC * AT1MX 71 DC * DT1MX 70 DC * 71 DC * 72 DC * DT2MX 72 DC * RT1M 70 DC * RT1MX 71 DC * MX DC * DC * MX250/ DC * MX250/ DC * TY125/175/ DC * HUSQVARNA ( REAR ) Bike Year Part # TC/FC DC TE/FE DC

22 TOOL / TRANSPORT WHEEL CHOCK (D1xxx) - Universal bike wheel chock. - Can be used on tire widths up to 145 mm. - Made of durable 20 mm diameter steel pipe. - Comes with fitting holes to easily fix on the floor. - Unique curved design does not interfere with sport bike big brake discs. ( D1122 ) D1112 MX : W185 x H245 x T295 (mm) : 1.4 kg D1122 STREET : W185 x H240 x T300 : 1.4 kg D1312 Right : W410 x D220 x H210 (mm) : 1.5 kg D1310 Left : W410 x D220 x H210 (mm) : 1.5 kg WHEEL CHOCK (D131x) - Special wheel chock to use when you need to turn handlebar in small van or on truck deck. - Great to use in small van, especially taking 2 motorcycles. - Available right and left side wheel chocks. - Made of 20 mm diameter durable pipe. - Can be use tire width up to 150 mm 22

23 TRANSPORT After D0101 FORK PULL DOWN HOOK - Cranking down front fork with tie-down using right front axle shaft hole makes it easy to fit in a low van mm exclusive use. 19 mm : L 115 mm : 229 g Before.. D3611 TIE DOWN HOOK STD - Tie-down hook for your van or truck. - Provides an additional hook point for tie downs. - Clamp bolt : M8. 2 pcs. M8 30mm 20mm D3612 TIE DOWN HOOK Swivel - Swivel-style tie-down hook for your van or truck. - Provides an additional hook point for tie downs. - Clamp bolt : M8. 2 pcs. 13mm M8 20mm 46mm 47mm D3601 RATCHET TIE DOWN - Ratchet buckle tie down for greater tensioning power. - Vinyl coated hooks with 25 mm wide, thick and durable strap. - Rubber covers on ratchet handle and release levers. - Easy to operate even in narrow and small spaces. - Comes in pairs. - Comes with loop strap to prevent damaging your bike. - Safety hook included to prevent unwanted detachment. Part # Description D Tie Down Belt Ratchet Pair Blue D Tie Down Belt Ratchet Pair Black D Tie Down Belt Ratchet Pair Red D3602 CAM BUCKLE TIE DOWN - Standard cam buckle tie down. - Vinyl coated hooks with 25 mm wide, thick and durable strap. - Comes in pairs. - Comes with loop strap to prevent damaging your bike. - Safety hook included to prevent unwanted detachment. Part # Description D Tie Down Belt Cam Buckle Pair Blue D Tie Down Belt Cam Buckle Pair Black D Tie Down Belt Cam Buckle Pair Red 23 D3608 TIE DOWN SOFT HOOK - Designed to compensate for attachment points not accessible with hooks. - Wrap around handle bars, sub frame etc and insert flat loop through twisted loop and attach tie down hook. - Comes in pairs. Part # Description D Tie Down Belt Soft Hook Pair Blue D Tie Down Belt Soft Hook Pair Black D Tie Down Belt Soft Hook Pair Red

24 TOOL / GARAGE C9010 MOTORCYCLE DISPLAY STAND - Tied front tire stand type for exhibition and in-store display. - Able to check riding position. - By adjusting long, short, two types of wire and turn buckle, it corresponds widely from small diameter tire to large diameter tire. - Laser cut steel made. 135 mm : W600 x D335 x H60 (mm) : 6 kg E7210 FRAME PAINT STAND - A coating stand for a movable frame mm shaft through the swing arm shaft of the motorcycle and set by chain hook. - Painting can be done at the best angle by turning during work. - With castors. - Made of steel. - Includes: 12 mm shaft ( length 740 mm ), chain with hook 1.5 m 2 12 mm shaft ( Length 740 mm ) Chain with hook 1.5 m 2 : Silver : W570 x D746 x H854 (mm) : 7.6 kg 746 mm 854 mm 570 mm 24

25 TOOL / GARAGE C5010 EMERGENCY SIDE STAND - Simplified rear wheel lift up stand. - Place under frame, opposite side of side stand, to lift up rear wheel very easy. - Great to use for repairing flat tire in your touring ride. - Provides 10 different stand heights to fit most motorcycle under frame. - Effective height is from 270 mm to 450 mm Max : 453 g : 300 kg C5025 SWING ARM LIFT STAND - Simplified rear wheel lift up stand. - Good to use when cleaning wheel, chain cleaning and chain oil lubing. - Non step height adjustable design, can be used for many kind of motorcycles. - Folding design for saving your storage spaces. - Effective height is from 330 mm to 380 mm *Do not remove rear wheel with this stand. Can not be used for maintenance which is required to remove rear wheels from the motorcycles. *Easy to slide when it is used on painted floor. Use this stand at grounds with good grip. Max : 767 g : 250 kg E4010 WHEEL ROLLER - Allows a motorcycle wheel to spin for cleaning or chain maintenance. - 3 different roller adjuster position allow to use wheel size from 10 to 19 inches. - Bearings inside of rollers provide smooth wheel spin. - Can be used tire size up to 200 size. Max : W215 x D345 x H41.5 (mm) : 1.8 kg : 200 kg 25 3 different roller adjuster position allow to use wheel size from 10 to 19 inches.

26 TOOL / GARAGE C4010 GRIP STAND - Easy to wash off mud underneath bike. - Able to use on tilting bike. - Slip off rubber to help bike stability. - Light weight, Easy carry. Max Height : W235 x H340 (mm) : 30 cm : 550 g Inner diameter 42 mm Holds grip securely Slip off rubber BOOTS WASH STAND - Stand designed for easy motocross boot washing. - Set boots up side down on the stand to wash with high pressure washer. - Water won t enter inside of boot. - Easy to wash, keep boots on the stand to dry. - Compact design. E8013 BOOTS WASH STAND : W270 x D300 x H570 (mm) : 2.4 kg With handle E8010 BOOTS WASH STAND : W270 x D300 x H515 (mm) : 1.95 kg SILENCER PLUG : S - Double soft rubber provides an excellent fit to keep water, bugs and dirt out of your exhaust system. - Comes with straps for easy removal from silencer end and storage. - Available in 2 sizes. : Rubber E8802 SILENCER PLUG S : For exhaust opening size from 15 mm to 30 mm : 37 g E8804 SILENCER PLUG L : For exhaust opening size from 30 mm to 50 mm : 98 g : L 26

27 TOOL / GARAGE HELMET HANGER - Wall hanging hook for your garage or van. - Can be hung on canopy pole with clamp bands and zip ties. - Not only for hanging helmets, but also other items helps make your garage well organized. - Made of durable steel. 5 mm 28 mm 1.5 mm 13.5 mm Type A E7802 HELMET HANGER Type A : W164 x D48.7 x H96.2 (mm) : 160 g E7804 HELMET HANGER Type B : W183.6 x D48.7 x H124 (mm) : 225 g Type B SPRING HOOK - Make your exhaust spring removal easy. - Body is made of durable stainless steel, and does not rust. - Rubber coated handle provide better grip for secure operation. - Available S and L sizes. P4302 SPRING HOOK S : W100 x T185 (mm) : 84 g P4304 SPRING HOOK L : W125 x T235 (mm) : 115 g SNAP RING PLIER - Pliers for C type snap rings. 4 different pliers available, internal and external, straight and bend head. P8001 P8002 P8003 P8004 Style Head style Tip diameter Open width Head length : Internal : Straight : 1.8 mm : 32 mm : 44 mm : 185 mm : 152 g Style Head style Tip diameter Open width Head length L head length : Internal 90 degree : 90 degree : 1.8 mm : 22 mm : 24 mm : 18 mm : 158 mm : 151 g Style Head style Tip diameter Open width Head length : External : Straight : 1.8 mm : 30 mm : 44 mm : 165 mm : 146 g Style Head style Tip diameter Open width Head length L head length : Internal 90 degree : 90 degree : 1.8 mm : 26 mm : 24 mm : 18 mm : 165 mm : 145 g GEAR PULLER - Tool for easily removing rusted and fixed kick arm, clutch arm, shift pedal, etc. P8011 Wide : 70 mm Corresponding gear size : mm : W67 x D33 x H100 (mm) : 341 g 27 P8012 Wide : 100 mm Corresponding gear size : mm : W100 x D35 x H165 (mm) : 588 g

28 TOOL / GARAGE P5020 WIRE TWISTER - Special wiring tool for motorcycle use. - Hook wire on stainless hook and rotate handle for twisting wire. - Make your wire twisting for grip, drain bolts and others easy. - Twister hook is made of stainless steel, durable and does not rust. : W 190 mm : 63 g N1100 SAFETY WIRE - Stainless wire for motorcycle safety wire or grip uses. - Wire thickness : 0.6 mm, Length : 100 m - Wire packed durable plastic case. Length : 100 m Wire thickness : 0.6 mm : 220 g P5510 GRIP END CUTTER - Easily to cut your grip end to install aluminum hand guards. - Hit grip end with this tool for a clean cut every time. - Comes with 2 cutters, 22.2 mm and 25.4 mm (throttle side) - Made of steel for durability. : W150 x D13 (mm) Case : W170 x D25 (mm) : 248 g P8021 STEEL OILER - Pump oiler comes with straight nozzle. - Great to use for engine, front fork assembling etc. - Container made of steel. Capacity Nozzle length : 200 ml : 130 mm : W45 x L170 x H130 (mm) : 127 g 28

29 TOOL / GARAGE P3801 SPARK PLUG WRENCH B TYPE Water-Cooled 10 - B type plug wrench for 2 stroke water cooled bikes. - Easy to use around a narrow engine head. - Bend angle 10 Both sides available. - Equipped with frequently used 12 mm. Length Thickness : 180 mm : 6 mm : 106 g Easy to carry in tool back Original Design!! E7120 ENGINE STAND - Engine maintenance stand. - Can be used on 50 to 450 cc single cylinder engine. - Stand length and height are adjustable, fits most single cylinder engine. - Comes with 2 engine shafts. : W315 x D353 x H205 (mm) : 4.6 kg Adjustable stand length to fit most small to 450 cc single cylinder engines. 29 Adjustable engine hanger height and width.

30 STOPPER Automatically locks when lifting. Pull down the lever handle and pull the stopper to release the lock and lower the bike. ROLLER 4 rollers prevent tilting of the lift bar and keep it horizontal when lifting the bike. DAMPER Two dampers reduce the impact when lowering. TIE-DOWN BELT with SPECIAL BRACKET Mounting position can be adjusted. Set on lift bar with pin and clip. LEVER HANDLE Pull Down Force Power through sprocket and chain makes lifting the bike easy. Easy MAINTENANCE, easy to move! C1410 MOVABLE GATE LIFTER - Able to move while lifting up the bike to the disassembly and maintenance of the wheel and the suspension. : W1082 x T1840 x D660 (mm) : 28.5 kg FRAME SPACER Height is adjustable with two different length frame. 100 mm ROTARY CASTER Smooth mobility with large diameter wheel. With brake x2, Without brake x2. REMOVABLE STABILIZER PIPE By inserting the stabilizer pipe in the hook ensures frame rigidity for mounting and moving. C1410 and C1412 SPEC - Lift bar height range: 1550 mm (Lowest) 1700 mm (Highest) - Inside frame width: 980 mm - Lift height: Approx 100 mm - Liftable weight: 200 kg C1412 MOVABLE GATE LIFTER w / Pull Handle - Comes with frame connection plate and carry handle. : W1082 x T1840 x D660 (mm) : 30.5 kg FRAME CONNECTION PLATE ( INCLUDE C1412 ) Connect 2 Lifters in front and back and lift up the whole bike and it makes movable. 30 CARRY HANDLE ( INCLUDE C1412 ) Pull, push, and turn when moving.

31 TOOL / GARAGE C1010 FRAME STAND - Lift gate for lifting up motorcycle. - Good for front fork and rear maintenance. - Maximum hanging weight 180 kg. : W1080 x D500 x H2000 (mm) : 15.2 kg *Do not hang entire motorcycle by this stand. *Do not use this stand at unstable place. *Lift a motorcycle by front or rear stands before hanging the motorcycle. Reinforced frame body. Provides 3 different heights with 16 mm fine adjustment. Tie down hooking point. Durable and stable frame stand foot. E7520 WHEEL STAND - Hold the wheel during your maintenance of front suspension or rear swing arm. - Can be used as a wheel maintenance stand, to clean up wheel, for spoke nipple tightening and rim tape attaching. - Folding design saves space in your garage. - Comes with Axle shaft holder. Folding Shaft Hub width Wheel size : W270 x T370 x H510 (mm) : W270 x T510 x H70 (mm) : 2.3 kg : more than 16 mm : up to 230 mm : up to 21 inch Axle shaft holder Folding design Adjustable shaft angle 31

32 TOOL / GARAGE C3102 Position changer C3104 Stand roller DETAIL C3102 POSITION CHANGER - This Position Changer makes your bike moving easy at the track deck or small garage. - Use this Position Changer with our Stand Roller (sold separately), to easily move your rear wheel. - Even big sport bike can be moved by this Position Changer because of its lever rule design. - Position Changer tire has a camber angle for easy operation. *Recommend to use this Position Changer with Stand Roller for easy operation. Designed to hold tire secure. Position Changer tire has a camber angle for easy to move the bike. Max : 3.38 kg : 250 kg How to use 1. Set stand roller (Sold separately) under the side stand. 2. Place position changer at rear wheel and lift up rear wheel. 3. Based front tire, you can move rear wheels very easy Durable steel pipe handle. C3104 STAND ROLLER - Stationing the front tire, you can move rear wheels very easy with position changer. - Place stand roller under the side stand to move your bike. - Stand roller tire has a camber angle for easy operation. Max : 885 g : 250 kg Stand roller tire has a camber angle for easy to move the bike. 32

33 STAND / STREET Intervals of 32 mm height B2310 ROAD BIKE FOOT PEG STAND - Foot peg stand for racing road bikes. - Easy to maintain rear wheels and swing arms. - Can be used with foot peg diameter less than 32 mm. - Provides 10 different heights with 16 mm fine adjustment. * May not be used for folding style foot pegs. : W300 x D260 x H385 (mm) : 5.2 kg Intervals of 16 mm height 10 different height adjustable function to fit most road bikes. B2010 ROAD BIKE FOOT PEG SIDE STAND - Foot peg side stand. - Great for use on racing bikes and bikes with removed stock side stand. - Can be used with foot peg diameter less than 32 mm. - Provides 8 different heights with 16 mm fine adjustment. * May not be used for folding style foot pegs. : W290 x D30 x H300 (mm) : 1.2 kg Intervals of 32 mm height 8 different height adjustable function to fit most road bikes. Intervals of 16 mm height Inner diameter 29 mm 33

34 STAND / STREET B2110 ROAD BIKE F STAND STEM UP - Front lift up stand for street bikes. - Lift bike from bottom steering stem, allowing front wheel and fork legs to be removed during maintenance. - Adjustable stand height to fit most street bikes. - Comes with 6 different pins, 13 mm, 15.5 mm, 18 mm, 20 mm, 22 mm and 24 mm to fit many of steering stem hole sizes. Height system : W500 x D700 (mm) : 40 mm 4 steps : 6.4 kg Can be folded for storage. 18 mm 15.5 mm 20 mm 22 mm 24 mm 13 mm Adjustable stand height to fit most street bikes. Comes with 6 different size pins to fit many steering stem hole sizes. B2191 ADAPTER SET - Replacement adapter set for B2110 Front stem up stand. - Comes in 13 mm, 15.5 mm, 18 mm, 20 mm, 22 mm and 24 mm pins. : 469 g 34

35 STAND / STREET B2235 ROAD BIKE R STAND Height Adjustable - Height and width adjustable sport bike stand. - Comes with L and U attachment. - Can be used on most motorcycles. *Can not be used on motorcycles, where swing arm heights on the left and right are different, or on one sided swing arm. : W500 x D550 x H (mm) : 6 kg Small bikes Height Adjust system Intervals of 19 mm height. 3 different heights. Big bikes TYPE L TYPE U 550 mm mm mm Mini (offset) mm mm Mini (offset) mm Offset Can be used for small to big bikes by changing attachment holder directions. Big bikes Small bikes B2210 ROAD BIKE R STAND TYPE L - Street bike universal rear stand allowing rear wheel removal and easy chain adjustment or maintenance. - L shape attachment holds lower swing arm to lift the bike. - Adjustable L shape adapter to fit many different street bikes. - Rubber coated L shape adapter won t scratch swing arm during lifting. - Height : 325 mm - Width : 265 mm mm : W500 x D590 x H325 (mm) : 4.6 kg B2220 ROAD BIKE R STAND TYPE U - Street bike universal rear spool stand allowing rear wheel removal and easy chain adjustment or maintenance. - Lift bike with installed swing arm spools. - Adjustable U shape adapter to fit many different street bikes. - U shape adapter design catches and holds the spools securely even stands fits diagonally. - Height : 360 mm - Width : 295 mm mm : W500 x D590 x H360 (mm) : 4.0 kg *Can not be used for motorcycle which swing arm heights on left and right are different, or one sided swing arm. *Can not be used for motorcycle which swing arm heights on left and right are different, or one sided swing arm. B2291 OPTIONAL ATTACHMENT TYPE L - L shape attachment to fit lower swing arm. B2292 OPTIONAL ATTACHMENT TYPE U - U shape attachment to fit swing arm spools. : W55 x D185 x H50 (mm) (1 pc) : 1 kg : W60 x D130 x H80 (mm) (1 pc) : 388 g 35

36 STAND / MX A116 MX LIFT STAND - Height adjustable dirt bike lift stand. - Non step height adjust system fits under most dirt bikes, from 65 cc to full size dirt bikes. - Hydraulic damper to eliminate the shock when lifting down the stand. - Jack foot pedal is designed for easy operation. - Non-slip rubber top plate lifts the bike securely. - Available compact and wide type top plate. - Rubber foot caps provide better grip and stability. - Adjustable Height range : 250 mm to 350 mm Max /Silver : W335 x D310 x H420 (mm) : 5.4 kg kg : 150 kg ( 300lb ) DETAIL Hydraulic damper eliminate the shock when lifting down the bike. ( A1160 and A1164 ) LINE UP Wide and compact top plates available. Height adjust system to fit under most offroad bike. A1160 A1161 A1164 A1165 Replacement A Compact top plate - Hydraulic damper Plate size : W58 x D263 (mm) : 5.8 kg - Compact top plate Plate size : W58 x D263 (mm) : 5.4 kg - Wide top plate - Hydraulic damper Plate size : W150 x D275 (mm) : 7 kg 36 - Wide top plate Plate size : W150 x D275 (mm) : 6.4 kg - MX Stand Rep. Damper size : W210 x D25 (mm) : 350 g

37 STAND / MX A126 MX LIFT STAND - Height adjustable dirt bike lift stand. - Non step height adjust system fits under most dirt bikes, from 65 cc to full size dirt bikes. - Hydraulic damper to eliminate the shock when lowering the stand. - Jack foot pedal is designed for easy operation. - Non-slip rubber top plate lifts the bike securely. - Available compact and wide type top plate. - H shape stand base provides grate stability. - Adjustable Height range : 350 mm to 420 mm Max : W300 x D330 (mm) : kg : 150 kg ( 300lb ) DETAIL Hydraulic damper eliminate the shock when lowering the bike. ( A1260 and A1264 ) Wide and compact top plates available. Height adjust system to fit under most offroad bikes. LINE UP Replacement A1260 A1261 A1264 A1265 A Compact top plate - Hydraulic damper Plate size : W58 x D263 (mm) : 5.8 kg - Compact top plate Plate size : W58 x D263 (mm) : 5.4 kg - Wide top plate - Hydraulic damper Plate size : W150 x D275 (mm) : 7 kg - Wide top plate Plate size : W150 x D275 (mm) : 6.4 kg - MX Stand Rep. Damper size : W210 x D25 (mm) : 350 g 37

38 STAND / MX A117 MX LIFT STAND - Height adjustable dirt bike lift stand. - 5 different heights adjust system fits under most dirt bikes, from 65 cc to full size dirt bikes. - Jack foot pedal is designed for easy operation. - Non-slip rubber top plate lifts the bike securely. - Rubber foot caps provide better grip and stability. - Adjustable Height range : 250 mm to 350 mm Max : W300 x D330 x H420 (mm) : kg : 150 kg ( 300lb ) DETAIL Hydraulic damper eliminate the shock when lift down the bike. ( A1170 and A1174 ) Wide and compact top plates available. 5 different height adjustable function to fit under most dirt bikes. LINE UP Replacement A1170 A1171 A1174 A1175 A Compact top plate - Hydraulic damper Plate size : W58 x D263 (mm) : 5.6 kg - Compact top plate Plate size : W58 x D263 (mm) : 5.4 kg - Wide top plate - Hydraulic damper Plate size : W150 x D275 (mm) : 6 kg - Wide top plate Plate size : W150 x D275 (mm) : 5.6 kg - MX Stand Rep. Damper size : W210 x D25 (mm) : 350 g 38

39 STAND / MX A127 MX LIFT STAND - Height adjustable dirt bike lift stand. - 5 different heights adjust system fits under most dirt bikes, from 65 cc to full size dirt bikes. - Jack foot pedal is designed for easy operation. - Non-slip rubber top plate lifts the bike securely. - H shape stand base provides grate stability. - Adjustable Height range : 250 mm to 350 mm Max : W300 x D330 x H420 (mm) : kg : 150 kg ( 300lb ) DETAIL Hydraulic damper to eliminate the shock when lifting down the bike. ( A1270 and A1274 ) LINE UP Wide and compact top plates available. 5 different height adjustable function to fit under most dirt bikes. Replacement A1270 A1271 A1274 A1275 A Compact top plate - Hydraulic damper Plate size : W58 x D263 (mm) : 5.6 kg - Compact top plate Plate size : W58 x D263 (mm) : 5.4 kg - Wide top plate - Hydraulic damper Plate size : W150 x D275 (mm) : 6 kg - Wide top plate Plate size : W150 x D275 (mm) : 5.6 kg - MX Stand Rep. Damper size : W210 x D25 (mm) : 350 g 39

40 STAND / MX A118 MX LIFT STAND - MX lift stand made of durable steel. - Long levered jack pedal for easy bike lift. - Rounded pipe handle for easy operation. - Non-slip rubber top plate lifts the bike securely. - Can be used for motorcycles with ground clearance between 310 mm to 410 mm. Max : W300 x D330 x H420 (mm) : kg : 150 kg ( 300lb ) DETAIL Wide and compact top plates available. 4 stand legs uphold the bike securely. Long levered jack pedal for easy bike lift. LINE UP A1181 A Compact top plate Plate size : W58 x D263 (mm) : 4.8 kg - Wide top plate Plate size : W150 x D275 (mm) : 5.6 kg 40

41 STAND / MX MX Quick Release Triangle Stand A Quick release function on triangle stand. - Stand stays on axle shaft during tranporting bike to washing area or garage. - Shaft diameter : 18 mm : H 370 mm : 600 g 18mm - Can be used with rear axle inner diameter 18 mm. A3230 A3220 A3110 A3010 : H 370 mm : 529 g Shaft diameter Application 11 mm Year KX125/ KLX250R/300R ALL KDX ALL DR250R ALL DT200WR ALL RM85L ALL DRZ400S/SM SX/SX-F EXC/EXC-F ALL TC TC FC250/350/ TE/FE TX mm - Can be used with rear axle inner diameter 14.5 mm mm Year RM125/ YZ125/ YZ400F-450F YZ250F YZ250FX YZ450FX YZ125X 17 YZ250X WR250R/X ALL : H 370 mm : 586 g 18 mm Year CRF450R CRF450RX 17 CRF250R CR125R/250R RMZ RMZ KX450F KX250F KX125/ YZ450F YZ250F SX/SX-F TC TC FC250/350/ FC250/450(US) TX FX350/ mm 14.5mm 18mm 11mm 14.5mm 18mm - Triangle stand comes with 3 different attachments to fit most dirt bike axle shafts. - Corresponding size : 11 / 14.5 / 18 mm : H 370 mm : 663 g 41 - T-type side stand comes with 3 different attachments to fit most dirt bike axle shafts. - Corresponding size : 11 / 14.5 / 18 mm : H 370 mm : 610 g MX SIDE STAND - Side stand, hook into rear axle. - Great to use on MX racing bikes and bikes removed stock side stand. - Made of durable steel.

42 STAND / MX A2210 FIT STAND - Height and stand angle adjustable stands. - Wide opening stand top area for easy oil changes. - 4 height adjustable foot bolts provides great stability. - Can be used for small to full size dirt bikes. - Comes with tool tray. - Black, red, orange and blue colors are available. - Stand height : 405 mm mm - Maximum stand angle : 10 degree (Stand angle will be limited by stand height) Max /Red/Orange/Blue : W370 x D430 x H (mm) : 5.14 kg : 150 kg ( 300 lb ) Easy to access oil drain bolt because of wide opening stand top. A Black A Red A Orange A Blue DETAIL 405 mm mm Adjustable angle Adjust stand height and angle to lift up your front and rear wheel when the bike sits on the stand. 42 Height adjustable Can be used for mini, super motard to full size dirt bikes. Can be adjusted to your required height for your track use or maintenance at garage.

43 STAND / MX A2130 MX DOLLY STAND - A stand with casters that allows mobility inside the garage. - Protect bike with two rubber pads. Secure high stability during maintenance and moving. - Equipped with two casters with stoppers, optimal when placing a motorcycle or storing. Max Top square size : W333 x D390 x H420 (mm) : 6.5 kg : 150 kg ( 300 lb ) : 190 x 250 (mm) Rubber pipes protect the motorcycle from damage Removable tray is ideal for tool storage during oil change and maintenance. A2219 FIT / DOLLY REP. RUBBER BLACK 2PK The height can be adjusted up to 250 mm mm. A4110 MX STAND VINTAGE - Vintage motocross bike stand. - Hold the bike secure, stand does not make contact with down pipe. - Height and width adjustable function fits most vintage motocross bikes. - Can be used with small wheel off road bikes, like TT50, CRF50 and DRZ50. - Big rubber end cap provides stand stability. : W 255 x D 255 x H 305 (mm) : 3.2 kg 43 The width can be adjusted up to 210 mm mm.

44 STAND / MX A2110 MX BOX STAND - Box type steel MX stand, made of durable steel. - Great for use on most full size dirt bikes. - Wide non-slip rubber top plate hold the bike securely. - Stand height : 420 mm Max : W376 x D376 x H420 (mm) : 4 kg : 150 kg ( 300lb ) Wide non-slip rubber top plate hold the bike securely. A2610 STEP STAND - Quick foot operated lift stand. - Allows easy access to oil drain plug because of its unique design. - Stand height : 410 mm - Made of durable steel construction. : W525 x D330 x H414 (mm) : 4 kg CR125M A4200 DIY STAND KIT - DIY KIT - Hassle free. - Free design of cutting, welding, painting to make your own stand. - Steel, phosphate treated. - Height 420 mm, Width 462 mm 1994 YZ250 KIT CONTENT: - Curved processed main pipe (16 mm t 3.0) x 2 - Straight pipe ( 16 mm t 3.0 ) x 2 - Rod (10 mm) x 4 - Reinforcement plate x 1 - Bracket x 2 - Rubber x 2 - End cap x 2 Production for example 44

45 TOURING / FORK COVER GPS / SMART PHONE HOLDER MOUNT - Convenient holder mount to attach holders for GPS, navigation, smart phone. - Set a hang angle of 5 on the holder mount horizontally - Mirror hole type lineup of 3 types for left and right and lever clamping. - Made of steel. Type Part# Description (mm) A J0110 For the left side ( It also works right side but It will be set in front) W127 x D50 x H45 72 g B J0120 For the right side ( It also works left side but It will be set in front) C J0130 Both left and right side mountable. W107 x D22.2 x H g 127 mm 107 mm Type-A,B 22.2 mm M10 23 mm 100 mm Pipe length 85 mm 22.2 mm 45 mm 105 mm mm M6 Pipe length 75 mm Type-C 30 mm 50 mm 25 mm N3531 / N3571 SILICONE FORK BOOTS Length (unloaded condition) - Made of durable and flexible silicone rubber. - It has a Constant flexibility even in high or low temperature. - Mat rubber surface finish. - Protect your inner tube from mud or dirt during your ride. - Comes with steel attaching bands. * Fork boots size may differ for each item due to rubber products. Please refer to above size as a guide. Inner tube Outer tube N T mm Part# (mm) N N N N Part# N Black N Blue N Red N Yellow N3591 / N3592 FORK BOOTS BAND 2 pcs N T mm Part# N Black N Blue N Red N Green N Yellow N3xxx FORK DUST COVER - Dust cover made of synthetic rubber, excellent in wear resistance, better than conventional fork dust cover. Matte black type surface. - The best for replacement covering of vintage bikes where stock parts are difficult to find 45 Part # (mm) Diameter Outer Lower height N N N N N N N N N N N N N Part # (mm) Diameter Outer Lower height N N N N N N N N N N N N

46 COCK / FUEL N0022 N0042 N0401 FUEL COCK & FUEL FILTER - Lever switch : ON / OFF / Reserve The screw size varies depending on year and model, please confirm manufacturer's tank. N0602 N0621 FUEL COCK Part # Approximate Bike N0010 XL125S, TLR200, XE50/75 M14 P=1.0 Nut width 19 mm N0011 XLR250, CRM250, MTX125/200 M16 P=1.5 Nut width 22 mm N0012 TLM200/220 M16 P=1.5 Nut width 22 mm N0022 CRM250AR, XR250(MD30) M18 P=1.0 Nut width 24 mm N0023 CRM250, XR250(MD30) M18 P=1.0 Nut width 24 mm N0031 CR125/250 W/R with washer & bolt M6 x 2 hole hole pitch = mm N0042 MT125/250, SL125 Inner M6 hole x 1 N0043 CD50/125, CL125 Inner M6 hole x 1 N0201 KLR250 M6 x 2 hole hole pitch = 34 mm N0241 KM90, KE90, 90SS, 90TR M16 P=1.5 Nut width 19 mm N TR M6 x 2 hole hole pitch = 34 mm N0401 RMX(SJ14), DT125R, DT200WR M6 x 2 hole hole pitch = 34 mm N0402 RMX(SJ14), DT125R, DT200WR M6 x 2 hole hole pitch = 34 mm with strainer N0411 SX200, RD125 M6 x 2 hole hole pitch = 34 mm N0413 RA125, (RH250, TS50W) M6 x 2 hole hole pitch = 34 mm N0602 GT50/80, TY50/80, MR50 M14 P=1.0 Nut width 19 mm N0611 TY125/175/250 M16 P=1.5 Nut width 19 mm N0621 XT500, DT250/350 Long M6 x 2 hole hole pitch = 34 mm N0641 DT200R, TY250R/S M6 x 2 hole hole pitch = 34 mm N0651 DT125(2N0) M16 P=1.5 Nut width 19 mm N0661 SEROW225 M6 x 2 hole hole pitch = 34 mm M6 34mm / 38-40mm(N0031) Nut N2110 FUEL FILTER Part # N2110 N2112 Clear Universal White Universal Inner hose size 5-7 mm N300x ( 500 mm) N301x ( 50 m ) N303x ( 2 pcs ) N30xx FUEL HOSE - Dual layered fuel hose. - Inside side nitrile rubber is high petrol resistance, out side chloroprene rubber is cold resistance and abrasion resistance. FuelHose Part# N3004 N3005 N3006 N3007 N3008 N3014 N3015 N3016 N3017 N mm 4 x 8 mm with Clips 500 mm 5 x 9 mm with Clips 500 mm 6 x 10 mm with Clips 500 mm 7 x 11 mm with Clips 500 mm 8 x 12 mm with Clips 50 m 4 x 8 mm 50 m 5 x 9 mm 50 m 6 x 10 mm 50 m 7 x 11 mm 50 m 8 x 12 mm Fuel Hose Clips Part# (mm) pcs N N N N N N N N N N

47 TOOL / CYCLE Pipe is not included. Please buy pipe at hardware store. Kit Content U9011 CYCLE STORAGE STAND - Cycle Stand. Just hook the saddle. - Folding legs is convenient for storage. - Rust-resistant zinc plating. - With holes for anchor bolt. * Pipe is not included. Please purchase at your local hardware store. ( Recommended pipe diameter 48.6 mm ) : 10 kg Set the pipe securely with U clamp and plate. Foldable. Hole for anchor bolt equipped. U9015 CYCLE FLIPOVER STAND 2pcs - Convenient stand allows the bicycle to be set upside down for maintenance. - Giving space of about 100 mm off the ground from the handle prevents interference of lights and cycle computers. - Fits road bikes (held by bracket). - Resin coating and rubber cover to prevent scratching of the cycle. 135 mm : W135 x D100 x T110 (mm) : 337 g 100 mm 110 mm 47

48 STAND / MX A2132 DOLLY STAND with Handle - A stand with casters that allows mobility inside the garage. - Protect bike with two rubber pads. Secure high stability during maintenance and moving. - Equipped with two casters with stoppers, optimal when placing a Motorcycle or storing. - With a handle on the dolly stand. - Since it is possible to move the entire bike and stand using the handle, the bike is hard to be displaced from the stand when moving. Max Top square size : W 333 x H 420 x D 390 ( mm ) : 8 kg : 150 kg ( 300 lb ) : 190 x 250 ( mm ) Rubber pipes protect the motorcycle from damage Removable tray is ideal for tool storage during oil change and maintenance. Since it is possible to move the entire bike and stand using the handle. A2219 FIT / DOLLY REP. RUBBER BLACK 2PK

49 B2410 CRUISER LIFT STAND - A new idea of a lift stand that raises a self-standing bike diagonally by side stands while vertically raising a bike. - Both jaws holding down-tube frame are capable of moving in sideway so that being able to grab the frame. - Tool is unnecessary for height and width setting. - Quickly lift up with ratchet wrench or electric impact wrench. - It provides high stability lift-up as well as safety works. Lift-up height range Max : W 460 x H 205 (mm) : 4.5 kg : 160 to 205 mm (4 level adjustment) : 500 kg 4 level adjustment 205 mm 190 mm 175 mm 160 mm Rubber pipe protects the motorcycle from damage.

50 STAND / CRUISER B2430 SWING UP LIFT STAND - A new idea of a lift stand that raises a self-standing bike diagonally by side stands while vertically raising a bike. - Both jaws holding down-tube frame are capable of moving in sideway so that being able to grab the frame. - Tool is unnecessary for height and width setting. - Quickly lift up with ratchet wrench or electric impact wrench. - It provides high stability lift-up as well as safety works. - Includes Low and High attachment. Lift-up height range Main pipe length Max : W 700 x H 300 x D 260 (mm) : 6.5 kg : 142 to 415 mm : About 500 mm : 500 kg LOW HIGH The attachment height and position can be adjusted to fit various bikes seamlessly without using tools By lifting up on the under frame helps avoid to interfere with the muffler etc. When lift up / down, work can be done quickly by using ratchet wrench or electric screwdriver (hex size 14 MM)

51 TOOL / GARAGE HELMET E7150 ENGINE HANGER DISPLAY STAND - Engine maintenance stand. - Stand to keep engine safety. - Rubber pipes protect engine from damages or scratches. CAUTION: Depending on the shape of the bottom of the engine, it may become unstable. : W 255 x H 55 x D 240 (mm) : 1.2 kg 185mm 135mm HELMET P8031 PART HANGER WASH SHAKER - Clean parts such as bearings, carburetor parts. - Equipped with mesh - O-ring in the cap helps avoid liquid leaking. - Aluminum body. - Aluminum cylinder Outer diameter inner diameter - Mesh inner diameter : Aluminum : W44 x H 70 ( mm ) : W41 x H 54 ( mm ) : W40 x H 50 ( mm ) : 1.2 kg White : E0101 Black : E0102 HELMET PIT BOARD HANGER - The material is made of acrylic, has excellent weather resistance and impact resistance, and its surface hardness is strong to scratch. - Both sides can be used. * Marker is not included. /White : Acrylic : L 380 x W 470 x thickness 3.5 ( mm ) : 650 g

52 TOOL / WHEEL,FORK HELMET STEERING HANGER STEM NUT Comb. WRENCH - Equipped with wrench and hook wrench, it works with the few tools. - 6 mm thickness design, easy to loosen the stem nut without removing the handlebar. Length : 300 mm Part # Wrench A P mm B P mm C P MM HELMET SPOKE WRENCH HANGER - It works for different nipple sizes with the front and rear wheels as well, designed to an easy-to-use length matched to the nipple. - It cuts 6 mm thickness steel material with high precision wire cut, and it is hardly strip screw thread even at a high load. - It fits also to Z WHEEL aluminum nipple and EXCEL spline nipple. Part # Nipple ( mm ) Length (mm) Approximate D P / CRF125F 14-, XTZ , SEROW250 FRONT 05- E P / F P / G P / CRF250L/M/RALLY 12-,CRF150R 07-,RM85 04-,YZ80/85 94-, XT250X 06-,TRICKER 04- WR250R/X 08-,KLX250/ D-TRACKER/X 98-,KX85 98-,KLX125/D-TRACKER ,CRF1000L 16- KX250F/450F 08-,CRF250/450/X/RX 02- H P / I P / EXCEL 150 RMZ250/ ,DRZ400SM 04-,YZ125/250/X 99-,YZ250/ 450F/FX, Z-WHEEL AR1 WHEEL/ALMINIUM NIPPLE KTM SX/SXF/EXC/EXCF ,EXCEL SPLINE NIPPLE

53 TOOL / SUSPENSION HELMET P1120 SPRING HANGER COMPRESSOR EX MONO SHOCK - It works for most motorcycle rear suspension regardless of single / twin suspension. - It come with the belt, can be easily and safely removed simply by tightening the spring without damaging the spring. Easily remove spring from suspension body. - Rubber on the side for maintenance when work on the work bench. - It comes with attachments for Loop type and Bracket type. : 1.8 kg TWIN SHOCK HELMET P3011 AXLE HANGER BRACKET SPINNER / HOLDER - Tool to support to remove and install an axle bracket of an inverted front fork. Diameter range of the axle : Φ 20 mm Φ 22 mm Φ 25 mm bracket hole Φ 26 mm Φ 27 mm Φ 30 mm Length : Silver : 320 mm : 1.4 kg Φ 30 mm How to use - A front fork inner tube is securely fixed by UNIT PIPE CLAMP ( P3505 ), insert the axle spinner into the shaft hole of the axle bracket and rotate it counterclockwise to disassemble. Please unscrew lock-screws to lock the axle shaft on an axle bracket before disassembling if needed. Φ 26 mm Φ 27 mm Φ 25 mm Φ 22 mm Φ 20 mm

54 TOOL / RACE HELMET E2000 STARTING HANGER BLOCK - Starting block riser for young and short motocross riders at starting gate cm (4 inch) height block provides more stability to get better starts. - None slip sheet on the surface for better grip. - Stackable design, saves space in your van or garage. - Made of steel, durable and light weight design. : 180 x 225 x 100 mm : 1.58 kg 100mm 225mm 180mm HELMET P2710 BRAKE HANGER PAD SPREADER - Special tool to create space between brake pads. - Curved head design does not damage brake pads. - Works with most brake calipers. : 160 x 50 x 20 mm : 147 g

55 STAND / MX A2410 MX FOLDING STAND - A folding stand that is easy to carry and can store even inside a van. - It is useful in various situations such as garage and paddock. - The top plate has two rubber coated pipes to prevent damage on the bike. - It works for full size motocrosser. Max Top square size : W355 x D365 x H420 (mm) : 3.2 kg : 150 kg ( 300 lb ) : 120 x 250 ( mm )

56 Web Site and Social media Home page Alibaba FaceBook Instagram tgmg.en.alibaba.com unit_motorcycle_products UNIT-Products YouTube UCt9gu3L0wC84s0KOvTzScBQ Head office 2-30 Nakamizuno Seto city, Aichi Japan Factory West Beiyang Station, Taigu County, Jinzhong, Shanxi China