Genuine BMW Motorrad accessories BMW R ninet derivatives

Transcription

1 Genuine BMW Motorrad accessories BMW R ninet derivatives R ninet (K21/11) R ninet Pure (K22) R ninet Racer (K32) R ninet Scrambler (K23) R ninet Urban G/S (K33) Product Information

2 HP carbon front wheel cover (NEW) The High Performance parts ooze high performance: premium, sporty, exclusive and sturdy at the same time. Each part is itself a masterpiece. Anyone striving for perfection has arrived at their goal here. Mounted parts made of carbon the ultimate lightweight material combine a refined appearance with technical expertise. High-quality front wheel cover made from CFRP Replaces the standard black front wheel cover made of plastic CFRP with UV-resistant high-gloss paint Suitable for K21/11 (part number ; no figure) and K22, K23, K32 (part number ; see figure) HP Carbon belt cover High-quality belt cover made from CFRP Distinctly modified, strikingly attractive frontal view CFRP with UV-resistant high-gloss paint Suitable for K21/11, K22, K23, K32, K33 Adopted from K2x Part number: HP Carbon cylinder head cover (NEW) High-quality cylinder head cover made from CFRP Marked individualization effect through accentuation of the opposed-twin engine CFRP with UV-resistant high-gloss paint Suitable for K21/11, K22, K23, K32, K33 Alternative: Cylinder head covers in various designs (silver, black, chrome-plated, 2V-Style, Machined) Part number: Left Right

3 HP Carbon cover for intake snorkel (NEW) High-quality cover made from CFRP for intake snorkel Including aluminum badge with embossed R ninet inscription Replaces the standard silver cover under the tank on the right-hand side CFRP with UV-resistant high-gloss paint Optionally combinable with HP Carbon trim for throttle body Workshop installation guide available in ASAP Suitable for K21/11, K22, K23, K32, K33 Part number: X2 HP Carbon trim for throttle body (NEW) High-quality trim for throttle bodies made of CFRP Replaces the standard trim made of plastic CFRP with UV-resistant high-gloss paint Optimally combinable with HP carbon cover for intake snorkel Workshop installation guide available in ASAP Suitable for K21/11, K22, K23, K32, K33 Part number: TBD HP Carbon cover for ignition switch (NEW) High-quality cover made from CFRP for ignition switch Visually attractive alternative for standard black cover made of plastic CFRP with UV-resistant high-gloss paint Suitable for K21/11, K22, K23, K32, K33 Alternative: Cover for ignition switch painted in granite gray HP Carbon hump cover (NEW) High-quality hump cover made from CFRP Black back padding, also available as smooth leatherette or with Alcantara look Small storage compartment, water-spray protected, non-locking For installing in place of the passenger seat CFRP with UV-resistant high-gloss paint Not in combination with rear bag Not in combination with Scrambler single seat bench Workshop installation guide available in ASAP Alternative: Aluminum hump cover or hand-brushed aluminum hump cover Suitable for K21/11, K22, K32 Part number: TBD

4 HP Sports muffler High-end in perfection: completely realized in titanium, with carbon end cap and HP lasered logo. Excellent sound makes every journey an acoustically sporty experience. 2 position options available. Slip-on silencer for robust sound and weight reduction with exclusive design All-titanium silencer (jacket, connecting pipe and internals) Carbon end cap 2 position options: Low (with/without passenger frame) or high (without passenger frame) Weight (end muffler): 1.8 kg Torque and power rating at standard level Logo with clearly visible HP inscription laser-etched into side face Optional: Cover for main frame screw connection (when passenger frame is removed) Installation variants: Low with passenger frame: only in conjunction with short connecting pipe Low without passenger frame: only in conjunction with short connecting pipe and frame for end muffler (standard for K32), only for one-up, recommended: cover for main frame screw connection High without passenger frame: high individualization effect with unique look, only in conjunction with long connecting pipe and frame for end muffler, only for one-up, recommended: cover for main frame screw connection Long connecting pipe (NEW) with 2 carbon heat protection covers With vehicle type approval (EU-ABE), please observe the regulations governing approval for highway use in your own country. Exhaust emission standards: Euro 4 Workshop installation guide available in ASAP HP sports muffler and long connecting pipe are adoptions from K23 Suitable for K21/11, K22, K23, K32, K33 Part number: HP adjustable steering damper (NEW) Comfort and performance in equal measures. Adjustable in 12 levels. Attachment same as original part Suitable for K21/11, K22, K23, K32, K33 Part number: High-quality steering damper that can be adjusted in 12 levels, gold-colored anodized Perfect range of adjustments for all types of journeys and riders For pleasant handling and the desired feedback from the motorcycle Steering dampers are generally used in motorcycles to avoid hazardous kickbacks when the front wheel is not loaded. Unlike the standard steering damper, the accessory steering damper provides the option to individually adjust the damping to your personal needs.

5 Tank bag/leather edition tank bag (NEW) Practical and stylish all at once the watertight canvas tank bag offers 11 l of storage space. Available in two material/color variants. Water-repellent outer fabric made of canvas Waterproof main compartment, approx. 11 l Surface-mounted external bag on cover, water-repellent See-through compartment, highly water repellent, easily accessible via double-sided zipper in the main compartment, with an anti-slip PU coating Small net compartment on inside of cover Optimally seated due to precisely adapted bottom panel made of EVA with an anti-slip PU coating Practical carry handle on front Buckles made from brushed metal with embossed BMW inscription, 2 hook-in loops; leather edition with brown real leather belt Small metal label with BMW Motorrad logo on rear Classic design suitable for the rear bag and side bags Tank belt with anti-slip coating and recess for fuel filler cap (must be ordered separately) Dimensions (LxWxH): approx. 38x28x19 cm Color: Black or Black washed (leather edition) Attachment of tank bag to tank belt: Front: Retaining tab hooked into receptacle in tank belt Rear: Double D closure and push-button Tank belt suitable for tank bag and for small tank bag (the tank belt has two loops: one for the tank bag above the fuel filler cap recess, one for the small tank bag below the fuel filler cap recess) Adoption from K21 and new material/color variant (leather edition) Note: New part number for known tank bag. The tank belt will no longer be part of the delivery specification in the future, instead it must be ordered separately. Two color/material variants can be chosen from. Suitable for K21/11, K22, K23, K32, K33 Part number: TBD Small tank bag (NEW)/leather edition small tank bag (NEW) Small, stylish bag made of canvas for cellular phones and sunglasses. Available in two material/color variants. Water-repellent outer fabric made of canvas Main compartment, approx. 1.5 l, provides space for a cellular phone, sunglasses and a wallet, water-repellent Surface-mounted external bag on cover, water-repellent Buckles made from brushed metal with embossed BMW inscription, 2 hook-in loops; leather edition with brown real leather belt Small metal label with BMW Motorrad logo on front Classic design suitable for the rear bag and side bags Tank belt with anti-slip coating and recess for fuel filler cap (must be ordered separately) Dimensions (LxWxH): approx. 20x15x10 cm Color: Black or Black washed (leather edition) Attachment of small tank bag on tank belt: Front: Retaining tab hooked into receptacle in tank belt Rear: Double D closure and push-button Tank belt suitable for tank bag and for small tank bag (the tank belt has two loops: one for the tank bag above the fuel filler cap recess, one for the small tank bag below the fuel filler cap recess) Suitable for K21/11, K22, K23, K32, K33 Part number: TBD

6 Rear bag/leather edition rear bag (NEW) Taking to the road the waterproof rear canvas bag with a capacity of 40 l offers ample space for the necessary luggage. Available in two material/color variants. Dimensions (LxWxH): 50x33x37 cm Color: Black or Black washed (leather edition) Part number: TBD Water-repellent outer fabric made of canvas Waterproof main compartment, approx. 40 l 2 surface-mounted side pockets, water repellent Optimally seated due to bottom panel being adapted precisely to the passenger seat and made of EVA with an anti-slip PU coating Shoulder strap (detachable, adjustable length, padded) and carrying handle Two straps with adjustable length for adapting the volume and for securing additional luggage Buckles made from brushed metal with embossed BMW inscription,; leather edition with brown real leather belt Small metal label with BMW Motorrad logo Classic design suitable for the tank bag and small tank bag Scope of delivery: rear bag, retaining elements, chafing protection, operating instructions Additional information Attachment to passenger seat: Front: install retaining tabs at right and left of vehicle (included in scope of delivery), secure retaining strap of rear bag to retaining tabs with double Velcro fastener. Rear: retaining strap with double D fastener, secure to retaining tabs on vehicle Only for one-up riding Maximum payload: 5 kg Permissible top speed with rear bag attached: 160 km/h Not in combination with side bag(s) Not in combination with Scrambler comfort passenger seat or single seat bench Adoption from K21 and new material/color variant (leather edition) Suitable for K21/11, K22, K23, K32, K33 Side bags (NEW)/leather edition side bags (NEW) The side bags combine a classic look with a modern attachment concept. With a total volume of 23 l, they provide sufficient space for long and short trips. Available in two material/color variants. Water-repellent outer fabric made of canvas Large main compartment: approx. 9 l (right), 14 l (left) Including waterproof, removable inner pocket with roll closure Detachable shoulder strap and carrying handle Buckles made from brushed metal with embossed BMW inscription, loops; leather edition with brown real leather belt Stable floor for good stability, leather edition with real brown leather floor Small metal label with BMW Motorrad logo Classic design suitable for the tank bag and small tank bag Stable, black case carrier made of tubular steel with a snap fastener attachment (to be ordered separately) Dimensions (LxWxH): 31x26x14 cm (left), 31x35x14 cm (right) Color: Black or Black washed (leather edition) With and without disassembled passenger frame Also in conjunction with hump cover Not in combination with rear bag Left side bag only in conjunction with muffler in low position Suitable for K21/11, K22, K23 (only on right), K32, K33 Part number: TBD

7 Luggage rack (NEW) Ideal for anyone preferring to carry more luggage instead of a passenger. Classic stainless steel luggage rack Dimensions: approximately 26x24x7 cm Only in conjunction with single seat for luggage rack, optionally in red or brown Suitable for K21/11, K22, K23, K33 Part number: TBD "Machined" customizing parts Roland Sands Design High-quality design and even more customizing spirit this is what the milled aluminum customizing parts Machined offer. The "Contrast Cut" procedure creates a unique look. CNC-milled design parts made of aluminum Unique two-color look achieved by the "Contrast Cut" procedure Large selection, optionally combinable: Cylinder head covers, oil filler neck lid, belt cover panel, headlamp cover panel, handle bars cover, rear axle cover, bevel gear bearing cover panel, swinging-fork bearing cover panel For detailed information, see the separate product information Suitable for K21/11, K22, K23, K32 and K33 (without headlamp cover Milled footrest system (NEW) The CNC-milled footrest system doesn't only look aesthetic, it is also highly functional. Numerous adjustment options with regard to ergonomics and sporting character fulfill all the rider's wishes. CNC-milled, elegant rider's footrest system, including shift and brake lever Various adjustment options for footrest as well as shift and brake lever Footrest, can be adjusted in twelve settings using rotor, adjusting diameter 22 mm Adjustable step pieces on the shift and brake lever High-strength aluminum alloy, lightweight and extremely dimensionally stable, anodized black Hardened surface, extremely resistant to wear and stone chippings Including aluminum heel protection Optional: Milled passenger footrest High-quality, two-color look coordinated with the milled handlebar lever and "Machined" customizing parts Suitable for K21/11, K22, K23, K32; K33 (only passenger footrest) Part number: Left Right Passenger assembly

8 Milled Handlebar Lever (NEW) The CNC-milled handlebar lever made of corrosion-resistant anodized aluminum can be adjusted in terms of the gripping range using the adjusting screw. CNC-milled clutch and brake lever Distance between handlebar lever and handlebar grip is individually adjustable in five stages Ergonomic and visual enhancement with a personal, individualized touch High-strength aluminum alloy, black anodized Two-color look customized to the footrest system and "Machined" customizing parts Workshop installation guide available in ASAP Suitable for K21/11, K22, K23, K32, K33 Part number: Clutch lever Brake lever Hand-brushed aluminum tank The aluminum tank is manufactured according to BMW quality standards and hand-brushed for a unique surface finish. No two tanks are alike, making each tank one of a kind. Hand-brushed aluminum tank with a glossy clear-coat finish Available with either a ground or visible weld seam Unique surface structure from brushing by hand Exclusive, very refined appearance Top quality processing in accordance with BMW quality standards Shape and volume identical to that of the standard tank Significant weight reduction compared to the steel tank Effective tank capacity: approx. 18 l, of which approx. 3 l for fuel reserve Delivery specification: Fuel tank (without BMW badges) Also available as optional equipment Suitable for K21/11, K22, K23, K32, K33 Part number: Visible seams Without visible seams Hand-brushed aluminum windshield (NEW) (not for K32) The high-quality aluminum parts give each motorcycle a completely individual look. Each part is a real eye-catcher. High-quality windshield made of aluminum, hand-brushed and clear painted Visual highlight Also provides some protection against the air stream Length/height/width: approx. 17x14x22 cm Suitable for K21/11, K22, K23 Part number: Holder M5X14 screw X Shim X M5X20 screw X4

9 Hand-brushed aluminum radiator cowl (NEW) Shapely radiator cowls made of aluminum, hand-brushed and clear glossy painted Visual eye-catcher on the right and left of the radiator Suitable for K21/11, K22, K23, K32, K33 Part number: TBD Hand-brushed aluminum cover for frame triangle (NEW) High-quality cover panel made of aluminum, hand-brushed and clear glossy painted Covers the upper area of the frame triangle on the right- and left-hand side Enhanced appearance and refinement Suitable for K21/11, K22, K23, K32, K33 Part number: TBD Aluminum pillion seat cover The aluminum hump cover is mounted instead of the passenger seat and hides a small, splash-proof storage compartment. The high-quality back padding provides greater rider comfort and rounds off the visual look. High-quality hump cover made of aluminum Available as aluminum or hand-brushed aluminum Black back padding, also available as smooth leatherette or with Alcantara look Small storage compartment, water-spray protected, nonlocking Installed in place of pillion seat Not in combination with rear bag Replaces the standard, painted hump cover for the K32 Workshop installation guide available in ASAP Suitable for K21/11, K22, K32 Alternative: HP Carbon hump cover Part number: Backrest pad

10 2V-Style cylinder head covers (NEW) Unique appearance the cylinder head cover in the retro design give the opposed-twin engine a very individual look. Visual highlight in the retro design Significant differentiation to the standard cylinder head covers In preparation Suitable for K21/11, K22, K23, K32, K33 Part number: TBD Cylinder head cover in silver, black or chrome-plated With the cylinder head covers now available in various versions, an even higher degree of customization is possible. Whether in chrome, silver or black each variant contributes to enhancing the motorcycle's appearance. Cylinder head covers in various versions Choice between a refined chrome design (with chrome mounting bolts) or color variants in silver or black Enhanced appearance and refinement Identical shape to granite-gray standard cylinder head cover Suitable for K21/11, K22, K23, K32, K33 Part number: Silver, left Silver, right Black, left Black, right Chrome, left Chrome, right Screw, chrome X Windshield Scrambler Stylish and functional: the windshield with the design of a starting number plate offers protection against the air stream. Windshield of full-color plastic, scratch-proof coating Provides protection against the air stream Dimensions (WxH): 24x16 cm Color: alpine white, solid color Adopted from K23 Suitable for K21/11, K22, K23 Part number: Holder M5X14 screw X Shim X M5X20 screw X4

11 Starting number plate Scrambler used in competitions Oval starting number plate made of painted sheet steel (1 mm) Positioning on the right and left underneath the seat Application of the start number when used in competitions Provides space to customize the Scrambler with labels Dimensions: Approx. 235x180 mm Color: alpine white, solid color Cross-selling: Scrambler windshield Suitable for K21/11, K22, K23, K32 Part number: TBD Rotational-speed sensor (NEW) Fully informed with the rotational-speed sensor, including gear indicator and on-board computer. Rotational-speed sensor with gear indicator and various onboard computer functions (date, average speed, average and current fuel consumption, vehicle voltage, driving time, engine temperature) Black metal housing, identical to the standard speedometer housing Diameter: approx. 9.5 cm (same speedometer) Optional: Rotational-speed sensor housing, matt, chrome-plated Suitable for K22, K23 Part number: Housing for instrument cluster, matt chrome-plated The motorcycle can optionally be upgraded with the matt, chrome-plated housing for the instrument cluster. It fits for both the standard speedometer and for the optional rotational-speed sensor. Refined housing with matt, chrome-plated finish Enhanced aesthetics with a personal, individualized touch Replaces the standard, black housing Suitable for K21/11, K22, K23, K32, K33 Part number:

12 Cover for ignition switch, granite gray Setting colorful accents the granite gray cover for the ignition switch makes this possible. Cover for ignition switch made from plastic painted granite gray Visually appealing replacement for standard black cover panel Suitable for K21/11, K22, K23, K32, K33 Part number: TBD Cover for the handlebar end R ninet The covers for the handlebar ends in silver are a small visual highlight. Refined cover for handlebar ends in silver Enhanced aesthetics with a personal, individualized touch Standard equipment in K21 Suitable for K22, K23, K32, K33 Part number: X2 Classic emblem Inspired by the old emblems, the Classic emblem completes the Heritage look. Decorative aluminum badge on the front frame Black lettering, clear-coat finish Dimensions: 10.2x6.6 cm (flat) Standard equipment in K21 Suitable for K22, K23, K33 Part number: Drive stud X2

13 Knee pads The ergonomically shaped rubber pads both prevent scratches on the left and right of the tank and also emphasize the Heritage look as a stylistic design element. Ergonomically shaped rubber pads on right and left side of tank Stylish design element with Heritage look Prevent scratching of the tank Color: Black Adopted from K21 Suitable for K21/11, K22, K23, K32, K33 Part number: Cross-spoke wheels The black anodized cross spoke wheels perfectly completes the classic Scrambler look. Also available as optional equipment. Black anodized cross spoke wheels Visibly off-road: the classic look combined with off-road functionality Rim dimensions: 3.0x19 inch front/4.5x17 inch rear Also available as optional equipment Not in conjunction with the low-slung optional equipment (OE 0499) Advantage of cross spoke wheels when used off-road: No risk of breakage (compared to cast wheel) Can be repaired by renewing individual spokes Tires are not included in the delivery specification (120/70 R19 at front, 170/60 R17 at rear) Suitable for K23, K33 Part number: Front Rear Spoke wheels (NEW) High-quality spoke wheels. Also available as optional equipment. High-quality spoke wheels of the R ninet Spokes in the middle, tire with hose required (not included in the delivery specification) Rim dimensions: 3.5x17 inch front/5.5x17 inch rear Also available as optional equipment Standard for R ninet (K21/11) Tires (not included in delivery scope): 120/70 ZR17 at front, 180/55 ZR17 at rear Suitable for K22, K32 Part number: Front Rear

14 End muffler R ninet Visual highlight: The high-quality, double-flow standard muffler of the R ninet can be retrofitted for all Heritage derivatives. High-end muffler of the R ninet Exclusive, double-flow design Made completely of titanium (jacket, connecting pipe and internal components) Weight: 4.3 kg Standard for R ninet (K21/11) Installation in low position possible with and without the passenger frame Suitable for K22, K23, K32 and K33 With passenger frame: Mounting on the standard bracket or, for K23, only in conjunction with K21/11 passenger frame Without passenger frame: Only in conjunction with bracket for end muffler (part number: ) Installation not possible in high position Exhaust emission standard: Euro 4 Suitable for K22, K23, K32, K33 Part number: End muffler Scrambler Individual look: The above, double-flow standard muffler for the Scrambler is also available for all other Heritage models. End muffler for the R ninet Scrambler Exclusive, double-flow design Hoisted, upper position Weight: 4,8 kg Standard for R ninet Scrambler (K23) Installation with and without the passenger frame only possible in high position Suitable for K21/11, K22, K32, K33 With passenger frame: Only in conjunction with K23 passenger frame Without passenger frame: Only in conjunction with bracket for end muffler (part number: , including heel protection) Installation not possible in low position Exhaust emission standard: Euro 4 Suitable for K21/11, K22, K32, K33 Part number: Cover panel for main frame screw connection When the passenger seat frame is removed, these covers conceal the unaesthetic open screw connections of the main frame. Aluminum double sleeve for covering the open screw connections of the re moved passenger seat frame Delivery specification: 1 piece The required quantity depends on the position of the standard/accessory muffler: K21/11, K22, K23, K33: Low position - 2 pieces, high position - 1 piece (a screw connection for the end muffler bracket is used in the high position.) K32: Low position - 0 pieces, high position - 1 piece Standard equipment in K21 Suitable for K21/11, K22, K23, K32, K33 Part number:

15 Chrome-plated exhaust manifold Gives the standard muffler or the HP sports muffler an additional exquisite touch. Exhaust manifold with a refined chrome design Matches the standard muffler and Akrapovi sports muffler With type approval (EU-ABE) Cross selling: chrome-plated cylinder head covers, housing for instrument cluster, matt chrome-plated Care: metal polish from BMW Motorrad (part number: ) Adopted from K23; standard for K21/11 Suitable for K22, K32, K33 Part number: LED Turn Indicator Absolutely groundbreaking with its design and function. The LED turn indicators consume less power and have a much longer service life. Also available as optional equipment. Attractively contoured, handlebar-mounted turn signal with white turn signal glass featuring modern LED technology Enhanced highway safety with immensely durable LEDs Substantial reduction in electrical-power demand Also available as optional equipment Details on reduced power consumption: the flashing frequency of LED turn signals has to be adapted. With BMW Motorrad this is carried out using the CAN bus. Suitable for K21/11, K22, K23, K32 Part number: X4 Bracket for front turn indicators (NEW) Good looking - the high-quality, forged aluminum bracket Forged aluminum bracket for visual enhancement Suitable for front turn indicators, both standard indicators and LED turn indicators Suitable for K22, K23 Standard equipment in K33 Part number: TBD

16 Low Urban seat (NEW) The 30 mm lower seat bench makes getting on and handling easier. Also available as optional equipment. Improved seat-to-ground height for easier handling while stationary Seat height for : 820 mm (standard: 850 mm) Inner leg curve for : 1830 mm (standard: 1890 mm) Color: Red Also available as optional accessory Suitable for K33 Part number: TBD Custom driver's seat For even more individuality, the Custom driver's seat is available with suggested cross-stitching and Alcantara look in some areas. Exclusive color design for enhanced aesthetics and customization Appealing side view with a continuous design line from the tank to the seat bench High quality seat bench surface with embossing, suggested cross-stitching and Alcantara look in some areas Black with white double decorative seam Embroidered ninet logo in gold Seat height for R ninet: 795 mm (standard: 805 mm) Inner leg curve for R ninet: 1775 mm (standard: 1785 mm) Seat height and inner leg curve depends on the model Only in conjunction with the R ninet passenger seat or com fort passenger seat Not in conjunction with the Akrapovi high sports silencer (long connecting pipe) Adopted from K21 Suitable for K21/11, K22, K23, K32, K33 Part number: Comfort passenger seat The comfort passenger seat is matched in appearance to the motorcycle, but offers greater seating comfort Combination of additional passenger seat comfort and exclusive design Wider and with more padding compared to the R ninet passenger seat High-quality bench seat surface made from artificial leather With grab strap Attractive white double decorative seam Embroidered ninet logo in gold, rear Appearance and material coordinated with R ninet driver's seat Color: Black Only in conjunction with the R ninet driver's seat or the Custom driver's seat Not in conjunction with rear bag Adopted from K21 Suitable for K21/11, K22, K23, K32, K33 Part number:

17 Top fork bridge with stub handlebars (NEW) Sportier look and sitting position oriented around the front wheel the stub handlebars make this possible. Standard for the R ninet Racer. Stub handlebars for a sportier look Front-wheel-oriented sitting position Standard for R ninet Racer (K32) Suitable for K22 Part number: TBD Adjustable clip-on bars (NEW) The multiply adjustable clip-on bars give the motorcycle the classic café racer look and ensure a sporty seating posture. Clip-on bars for more sporty look, anodized black Seating posture oriented towards the front wheel Height angle adjustable (-8 to +8 ) Axial adjustment in accordance with marks (handlebars can be rotated to rear) Not in conjunction with bracket for K21 navigation system Suitable for K21/11 Part number: TBD Pillion frame (NEW) Two-up on tour the retrofittable pillion frame makes it possible, even on the R ninet Racer. Retrofittable pillion frame Ride the R ninet Racer either in one-up or two-up configuration Not in conjunction with Scrambler rear silencer Only in conjunction with rear footrests (standard or milled) and passenger seat (R ninet passenger seat or comfort rear seat) ISuitable for K32 Standard on K21, K22, K33 Part number: TBD

18 Heated handlebar grips Warm hands, even at cooler temperatures the two-level adjustable heated grip makes it possible. Also available as optional equipment. Retrofitting of optional heated handlebar grips Operation via the multifunction switch on the right-hand handlebar fitting Replacement of the existing grips (new multifunction switch is required on the right-hand handlebar fitting) Also available as optional accessory Suitable for K21/11, K22, K23, K32, K33 Part number: Handle, left Handle, right Combination switch Bracket for BMW Motorrad navigation system The functional bracket is matched in appearance to the motorcycle and is used to attach the BMW Motorrad navigation devices and the Smartphone Cradle. Functional bracket Suitable for BMW Motorrad Navigator V (and older), Navigator Street and Smartphone Cradle Secure attachment on handlebar clamping block Ideally positioned in the rider's field of vision Can be combined with the BMW Motorrad tank bag. The view of the navigator is minimally obstructed or not obstructed at all (de pending on the rider's size and how much the tank bag is filled). Very simple installation: K22: On handlebar clamping block with only 2 screws K32: On head tube with only 1 screw Workshop installation guide available in ASAP K22: Adopted from K21/K23 K23: New part Suitable for K21/11, K22, K23, K32, K33 Part number: Screw Navigator V TBD K32 Dual USB charger with cable for 12V socket Charge your smartphone and digital camera while riding your motorcycle no problem with the dual USB charger. Thanks to two USB ports, two equipment can be charged together from the motorcycle connector. Charger for simultaneous charging of a maximum of two mobile devices while riding using the 12V socket on the motorcycle Compatible with smartphone, cellular phone, tablet, MP3 player, digital camera and more 2 USB ports Choose between two cable lengths: 60 or 120 cm Fits all BMW Motorrad sockets (except Maxi-Scooter) Comprehensive product information will follow Part number: cm cm

19 Plastic cylinder-head cover guard The cylinder-head cover guard of fiberglass-reinforced plastic protects the cylinder head from damage. Guard made of fiberglass-reinforced plastic, impact-proof and UV-resistant Protects the cylinder head covers from scratches and dam age due to falling over Underscores the design and line of the opposed-twin engine Combination with engine protection bar possible Suitable for K21/11, K22, K23, K32, K33 Part number: Aluminum cylinder-head cover guard The cylinder-head cover guard of anodized aluminum protects the cylinder head from damage and enhances the motorcycle's appearance. Full protection of the cylinder head cover of anodized aluminum Ideal for off-road riding Underscores the design and line of the opposed-twin engine BMW logo embossed over a large area Not in combination with crash bar Suitable for K21/11, K22, K23, K32, K33 Part number: Aluminum engine guard (NEW) The sturdy aluminum engine guard provides effective protection against damage to the lower engine. Robust protection made from aluminum, 2 mm thick, anodized Protects the lower engine compartment from stone impacts and grounding Emphasizes the off-road character Stainless steel bracket Weight: approximately 1 kg Suitable for K23, K33 Part number: Bracket Mounting kit

20 Crash Bar (NEW) The engine protection bar made of electro polished stainless steel effectively protects against cylinder damage without restricting freedom when leaning into bends. It also combines perfectly with the plastic cylinder-head cover guard. Rugged, 2-piece engine protection bar made of electro polished stainless steel Effective protection against damage in cylinder area Weight: approximately 4 kg Combination with plastic cylinder-head cover guard possible Not in conjunction with aluminum cylinder-head cover guard Not in conjunction with 0499 low-slung optional extra Suitable for K21/11, K22, K23, K33 Expected availability from June 2017 Hand protector (NEW) The hand guard protects the hands against wind and weather, and against branches and flying stones when riding offroad. Protects hands and controls from wind and weather and from bushes, shrubs and flying stones Impact-proof, UV-resistant plastic Color: Blackal information Suitable for K21/11, K22, K23, K33 Part number: TBD Protective grille for headlamp The protective grille for the headlamp is an ideal addition when using the motorcycle off-road. Only approved for offroad use (no vehicle type approval). Effective protective grille made of sheet steel, cathodic dip coating For off-road use only Protects the headlamp from stone chips during off-road use Color: Black 2 model-specific variants: K21/11, K22, K23: see figure, adopted from K23 K33: Material and function identical, form and connection differ, no figure Part number: TBD LED auxiliary driving lamp Added safety in poor visibility: see and be seen better with the LED auxiliary headlights, even in fog, snow or rain. High-performance LED auxiliary driving lamp in pressure-cast housing Increased safety on the road: See and be seen more easily Fault-free and maintenance-free operation due to the almost wear-free LED Suitable for K21/11, K22, K23, K33 Availability scheduled for 3rd quarter 2017

21 Safety bolt for oil filler neck Small but effective: milled from aluminum, protects the safety screw against unauthorized access. Closure cap for oil filler neck, lockable with special offset spanner Provides protection from theft of the cap and external substances in the oil circuit Milled aluminum, silver anodized finish BMW Boxer logo Supplied with special offset spanner and O-ring Part number: Alarm system The system reacts to changes in position and vibrations with a clearly detectable signal and a flashing hazard warning lights system. Responds to position changes and vibration with acoustic and visual signals Activated automatically when the ignition is switched off Also available as optional accessory Part number: Brake disc lock with anti-theft alarm system The BMW Motorrad brake disc lock represents ideal theft-proofing when on the go. The integrated anti-theft alarm system, a lock bolt, as well as a housing made of specially hardened steel reliably protect against theft and lock manipulation. It can be easily stowed away thanks to its compact dimensions. Brake disc lock to protect high-quality motorcycles Safe, compact, and includes anti-theft alarm system 13 mm lock bolt, housing, and carrying parts of the locking mechanism made of specially hardened steel Anti-theft alarm system detects vibrations and the slightest movements and consequently activates an acoustic alarm. Acoustic alarm with a minimum of 100 db for 15 seconds, then automatic reactivation Special lock barrel for extremely high protection against manipulation External dimensions (locking mechanism): 115x67x42 mm Part number: Sales Information Customization is becoming increasingly popular. Customers value an individualized look and seek out ways to equip and modify their motorcycle to meet their personal wishes. This is true in general and especially for customers of the R ninet family. In light of this development, the motorcycle equipment offer is becoming increasingly important. The broad selection of high quality original accessories for the R ninet derivatives is the BMW Motorrad response to this trend. BMW Motorrad recommends active marketing of the accessory products during the sale of the vehicle (both new and used vehicles) and on customer contact during the running-in check or on the occasion of subsequent service appointments. The "right" presentation in the showroom is occasionally crucial for sales success.

22 Cross selling Equally as important as the individual accessories are suitable clothing as an expression of the motorcycle's identity. BMW Motorrad offers appropriate rider's equipment Legend helmet, Road 66 goggles DarkNite suit Jackets: Black Leather jacket, San Diego jacket, Club Leather jacket Trousers: Ride jeans, FivePocket jeans Boots: Rockster boots, RIDE sneakers, DRY sneakers Gloves: Rockster, DownTown As well as the appropriate rider's equipment, the BMW Motorrad offering for matching motorcycle fan articles will be significantly expanded from Additions will include many t-shirts and key rings; the R ninet Racer t-shirt is shown as an example here Detailed product information for all products follows.