POWER TOOL SOLUTIONS TM FOR VEHICLE SERVICES

Size: px

Start display at page:

Download "POWER TOOL SOLUTIONS TM FOR VEHICLE SERVICES"

Darrell Richard
5 years ago
Views:

1 POWER TOO SOUTIONS TM FOR VEHICE SERVICES

Eagle Group has been a supplier of power tools for over 30 years throughout the United States, Mexico and South America.

2 Abrasive Tools Impact Wrenches Drills TM POWER TOO SOUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material removal, finishing, maintenance, automotive, or assembly Eagle Group has your solution. Eagle Group has been a supplier of power tools for over 30 years throughout the United States, Mexico and South America. ocated in Portland, Oregon, Eagle resides in AIMCO s corporate complex. Percussion Tools Fastening Tools Cutting Tools Accessories CA TODAY TO FREE:

3 TABE OF CONTENTS Impact Wrenches...4 Clutch Selection Information Chart 3/8" 1/2" 3/4" 1" 1 1/2" Accessories...13 Torque Wrenches Balancers Retractors FR Units Regulators Hoses Air Fittings Couplers Bits and Sockets Mag-O-Nets 3

TYPE: USES: Single Hammer l Delivers high

l Standard assembly l Automotive repair l

system producing torque quickly with two

4 IMPACT WRENCH TYPES Clutch Information Chart " Impact Wrench Page 9 TOO TYPE: USES: Single Hammer l Delivers high torque-to-weight ratio. l Standard assembly l Automotive repair l ight industrial use Twin Hammer l Reliable system producing torque quickly with two forged hammers. l Industrial maintenance l Tire service Pin Clutch l Rapid delivery of torque. l High power-to-weight ratio. l Maintenance l ight assembly l Hard joints Swing Hammer Clutch l Rapid delivery of torque. l Simple, effective design. l Standard assembly applications l Maintenance l Hard joints 4

IMPACT WRENCHES 2010 GENERA DUTY 2163EC INDUSTRIA DUTY 3/8" Butterfly Inline Impact Wrench Single hammer design Air inlet swivels 360 for easy maneuvering For bench work,

.. 3/8" RPM - Approximate:... 10,000 Torque Range - Approximate:... 11-75 ft-lb / 15-102 Nm Max Torque:... 92 ft-lb / 125 Nm Weight:... 2.8 lb / 1.3 kg ength:... 6.

.. 13 cfm l Approximate Working Torque - 75 ft-lb 3/8" Impact Wrench Composite housing Swivel air inlet fitting arge easy-to-use forward reverse switch Bottom grease fitting Drive

Fast cycle times ong life For general industrial use Metal housing for durability Compact size for tight access Handle exit exhaust 2225 with standard anvil 2225 with extended

5 IMPACT WRENCHES 2010 GENERA DUTY 2163EC INDUSTRIA DUTY 3/8" Butterfly Inline Impact Wrench Single hammer design Air inlet swivels 360 for easy maneuvering For bench work, carburetors, ignitions, body panels, transmissions, fender struts, oil pans, and small engine work Butterfly throttle allows one-hand directional changes Drive Size:... 3/8" RPM - Approximate:... 10,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 125 Nm Weight: lb / 1.3 kg ength: in / 163 mm Air Usage: cfm l Approximate Working Torque - 75 ft-lb 3/8" Impact Wrench Composite housing Swivel air inlet fitting arge easy-to-use forward reverse switch Bottom grease fitting Drive Size:... 3/8" RPM - Approximate:... 10,400 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 298 Nm Weight: lb / 1.2 kg ength: in / 165 mm Air Usage: cfm l Approximate Working Torque ft-lb 2150 INDUSTRIA DUTY GENERA DUTY 3/8" Impact Wrench 1/2" Impact Wrench Steel clutch housing protects hammer mechanism Fast cycle times ong life For general industrial use Metal housing for durability Compact size for tight access Handle exit exhaust 2225 with standard anvil 2225 with extended length anvil Drive Size:... 3/8" RPM - Approximate:... 10,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 270 Nm Weight: lb / 1.5 kg ength: in / 152 mm Air Usage: cfm l Approximate Working Torque ft-lb Drive Size:... 1/2" RPM - Approximate:... 8,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 495 Nm Weight: lb / 2.5 kg ength: in / 184 mm Air Usage: cfm l Approximate Working Torque ft-lb 5

IMPACT WRENCHES 2260 2260 GENERA DUTY 2256 INDUSTRIA DUTY 1/2" Impact Wrench 1/2" Impact Wrench Engineered for the aftermarket automotive industry Pin clutch design to quickly deliver torque 2260

.. 114-260 ft-lb / 154-352 Nm Max Torque:... 302 ft-lb / 409 Nm Weight:... 6.15 lb / 2.8 kg ength:... 7.5 in / 194 mm Air Usage:... 12 cfm l Approximate Working Torque - 260 ft-lb Drive Size:.

.. 15 cfm l Approximate Working Torque - 395 ft-lb 2125PEC 1/2" Composite Impact Wrench, Pin Type Anvil Composite and lightweight housing Swivel air inlet fitting Unique motor set design eliminates

.. 300 ft-lb / 405 Nm Weight:... 2.9 lb / 1.3 kg ength:... 6.5 in / 165 mm Air Usage:.

6 IMPACT WRENCHES GENERA DUTY 2256 INDUSTRIA DUTY 1/2" Impact Wrench 1/2" Impact Wrench Engineered for the aftermarket automotive industry Pin clutch design to quickly deliver torque 2260 with standard anvil 2260 with 2-1/2" extended anvil Handle exhaust directs air away Steel casing Drive Size:... 1/2" RPM - Approximate:... 7,500 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 409 Nm Weight: lb / 2.8 kg ength: in / 194 mm Air Usage: cfm l Approximate Working Torque ft-lb Drive Size:... 1/2" RPM - Approximate:... 7,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 575 Nm Weight: lb / 2.6 kg ength: in / 190 mm Air Usage: cfm l Approximate Working Torque ft-lb 2125PEC 1/2" Composite Impact Wrench, Pin Type Anvil Composite and lightweight housing Swivel air inlet fitting Unique motor set design eliminates power loss Noise reducing exhaust design for quiet operation Drive Size:... 1/2" RPM - Approximate:... 10,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 405 Nm Weight: lb / 1.3 kg ength: in / 165 mm Air Usage: cfm l Approximate Working Torque ft-lb INDUSTRIA DUTY PEC 1/2" Composite Impact Wrench Composite and lightweight housing Swivel air inlet fitting Unique motor set design eliminates power loss Noise reducing exhaust design for quiet operation INDUSTRIA DUTY 2240PEC Pinned Anvil Drive Size:... 1/2" RPM - Approximate:... 8,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 600 Nm Weight: lb / 2.3 kg ength: in / 208 mm Air Usage: cfm l Approximate Working Torque ft-lb 6

7 IMPACT WRENCHES 2258EC 1/2" Composite Impact Wrench Composite housing Swivel air inlet fitting arge easy-to-use forward reverse switch Same as 2163EC with 1/2" square drive Drive Size:... 1/2" RPM - Approximate:... 10,400 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 298 Nm Weight: lb / 1.2 kg ength: in / 165 mm Air Usage: cfm l Approximate Working Torque ft-lb INDUSTRIA DUTY 2263EC 2263PEC 1/2" Composite Impact Wrench Swivel air inlet fitting arge easy-to-use forward reverse switch Bottom grease fitting INDUSTRIA DUTY 2263PEC Pinned Anvil Drive Size:... 1/2" RPM - Approximate:... 7,800 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 452 Nm Weight: lb / 2.0 kg ength: in / 208 mm Air Usage: cfm l Approximate Working Torque ft-lb 2377 INDUSTRIA DUTY 2375EC INDUSTRIA DUTY 3/4" Impact Wrench Composite housing Handle exhaust directs air away Feathering trigger for ultimate control 3/4" Composite Impact Wrench Composite housing Swivel air inlet fitting arge easy-to-use forward reverse switch Bottom grease fitting Drive Size:... 3/4" RPM - Approximate:... 5,000 Torque Range - Approximate: ,065 ft-lb / 310-1,450 Nm Max Torque:... 1,250 ft-lb / 1, 695 Nm Weight: lb / 3.6 kg ength: in / 222 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,065 ft-lb Drive Size:... 3/4" RPM - Approximate:... 5,500 Torque Range - Approximate: ,290 ft-lb / 1,243-1,750 Nm Max Torque:... 1,540 ft-lb / 2, 090 Nm Weight: lb / 3.5 kg ength: in / 239 mm Air Usage: cfm Air Inlet:... 3/8" l Approximate Working Torque - 1,290 ft-lb 7

IMPACT WRENCHES 2380 INDUSTRIA DUTY 2004 GENERA DUTY 3/4" Composite Impact Wrench Compact composite housing Swing hammer design Optimal power-to-weight ratio Most powerful tool in its class Handle

.. 125-1,450 ft-lb / 170-1,975 Nm Max Torque:... 1,875 ft-lb / 2, 540 Nm Weight:... 12.4 lb / 5.6 kg ength:... 11.75 in / 298 mm Air Usage:... 19.4 cfm Air Inlet:.

.. 10.5 lb / 4.8 kg ength:... 9.5 in / 241 mm Air Usage:... 28 cfm Air Inlet:.

8 IMPACT WRENCHES 2380 INDUSTRIA DUTY 2004 GENERA DUTY 3/4" Composite Impact Wrench Compact composite housing Swing hammer design Optimal power-to-weight ratio Most powerful tool in its class Handle exhaust directs air away 3/4" Impact Wrench Single hammer design Built-in regulator Available with extended anvil Drive Size:... 3/4" RPM - Approximate:... 4,000 Torque Range - Approximate: ,450 ft-lb / 170-1,975 Nm Max Torque:... 1,875 ft-lb / 2, 540 Nm Weight: lb / 5.6 kg ength: in / 298 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,450 ft-lb Drive Size:... 3/4" RPM - Approximate:... 5,000 Torque Range - Approximate: ft-lb / Nm Max Torque: ft-lb / 815 Nm Weight: lb / 4.8 kg ength: in / 241 mm Air Usage: cfm Air Inlet:... 3/8" l Approximate Working Torque ft-lb 2480 INDUSTRIA DUTY 2485 INDUSTRIA DUTY 1" Composite Impact Wrench Compact, composite housing Swing hammer design Optimal power-to-weight ratio Most powerful tool in its class Handle exhaust directs air away Drive Size:... 1" RPM - Approximate:... 4,000 Torque Range - Approximate: ,450 ft-lb / 170-1,975 Nm Max Torque:... 1,875 ft-lb / 2, 540 Nm Weight: lb / 5.6 kg ength: in / 298 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,450 ft-lb 1" Inline Impact Wrench, Extended Swing hammer clutch design for low vibration Extended anvil for optimal access on deep wheels and applications Drive Size:... 1" RPM - Approximate:... 4,000 Torque Range - Approximate: ,875 ft-lb / 1,130-2,542 Nm Max Torque:... 2,290 ft-lb / 3,100 Nm Weight: lb / 12.7 kg ength: in / 482 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,875 ft-lb 8

IMPACT WRENCHES 2463 INDUSTRIA DUTY 2403 INDUSTRIA DUTY 1" Impact Wrench, Extended Steel clutch housing protects hammer mechanism For tire changing on trucks and buses 1"

.. 670-1,300 ft-lb / 908-1,760 Nm Max Torque:... 1,600 ft-lb / 2,169 Nm Weight:... 20.2 lb / 9.0 kg ength:... 22.0 in / 559 mm Air Usage:... 26 cfm Air Inlet:.

.. 1,250-1,875 ft-lb / 1,695-2,550 Nm Max Torque:... 2,000 ft-lb / 2,825 Nm Weight:... 21.3 lb / 9.7 kg ength:... 23 in / 584 mm Air Usage:... 25 cfm Air Inlet:.

extended anvil INDUSTRIA DUTY 2453 1" Impact Wrench Steel clutch housing protects hammer mechanism For off-road equipment repair, heavy equipment, MRO INDUSTRIA DUTY Drive

5 kg ength:... 19.5 in / 495 mm Air Usage:... 26 cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,450 ft-lb Drive Size:... 1" RPM - Approximate:.

9 IMPACT WRENCHES 2463 INDUSTRIA DUTY 2403 INDUSTRIA DUTY 1" Impact Wrench, Extended Steel clutch housing protects hammer mechanism For tire changing on trucks and buses 1" Inline Impact Wrench, Extended Composite housing reduces weight Extended anvil Swivel exhaust Drive Size:... 1" RPM - Approximate:... 3,900 Torque Range - Approximate: ,300 ft-lb / 908-1,760 Nm Max Torque:... 1,600 ft-lb / 2,169 Nm Weight: lb / 9.0 kg ength: in / 559 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,300 ft-lb Drive Size:... 1" RPM - Approximate:... 4,000 Torque Range - Approximate:... 1,250-1,875 ft-lb / 1,695-2,550 Nm Max Torque:... 2,000 ft-lb / 2,825 Nm Weight: lb / 9.7 kg ength: in / 584 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,875 ft-lb " Inline Impact Wrench Smooth power in a compact, lightweight design 2450 with standard 3" anvil 2450 with 6" extended anvil INDUSTRIA DUTY " Impact Wrench Steel clutch housing protects hammer mechanism For off-road equipment repair, heavy equipment, MRO INDUSTRIA DUTY Drive Size:... 1" RPM - Approximate:... 6,000 Torque Range - Approximate: ,450 ft-lb / 1,274-1,965 Nm Max Torque:... 1,600 ft-lb / 2,169 Nm Weight: lb / 8.5 kg ength: in / 495 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,450 ft-lb Drive Size:... 1" RPM - Approximate:... 3,900 Torque Range - Approximate: ,300 ft-lb / 908-1,760 Nm Max Torque:... 1,600 ft-lb / 2,170 Nm Weight: lb / 9.2 kg ength: in / 388 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 1,300 ft-lb 9

IMPACT WRENCHES 2550 INDUSTRIA DUTY 1 1/2" Inline Impact Wrench

.. 1 1/2" RPM - Approximate:... 2,500 Torque Range - Approximate:.

.. 3,500 ft-lb /4,745 Nm Weight:... 50 lb / 23 kg ength:.

10 IMPACT WRENCHES 2550 INDUSTRIA DUTY 1 1/2" Inline Impact Wrench Efficient power to weight ratio Swing hammer clutch Drive Size: /2" RPM - Approximate:... 2,500 Torque Range - Approximate:... 2,100-3,200 ft-lb / 2,847-4,338 Nm Max Torque:... 3,500 ft-lb /4,745 Nm Weight: lb / 23 kg ength: in / 508 mm Air Usage: cfm Air Inlet:... 1/2" l Approximate Working Torque - 3,200 ft-lb 10

RATCHET WRENCHES 3115 GENERA DUTY 3100 GENERA DUTY 1/4" Ratchet Wrench 3/8" Ratchet Wrench Rear exhaust with silencer Extended ratchet housing for greater reach For smaller fasteners Ball & needle

6 kg ength:... 8.0 in / 203 mm Air Usage:... 10 cfm l Approximate Working Torque - 18 ft-lb Drive Size:... 3/8" RPM - Approximate:... 160 Torque - Approximate:... 24 ft-lb / 33 Nm Weight:... 2.6 lb / 1.

.. 16 cfm l Approximate Working Torque - 24 ft-lb 3105 GENERA DUTY 3205 GENERA DUTY 1/2" Ratchet Wrench 3/8" Ratchet Wrench Excellent for general purpose use Improved gear head extends life Power for

11 RATCHET WRENCHES 3115 GENERA DUTY 3100 GENERA DUTY 1/4" Ratchet Wrench 3/8" Ratchet Wrench Rear exhaust with silencer Extended ratchet housing for greater reach For smaller fasteners Ball & needle bearing construction for long life Internal ring gear with three planetary gears Drive Size:... 1/4" RPM - Approximate: Torque - Approximate: ft-lb / 24 Nm Weight: lb / 0.6 kg ength: in / 203 mm Air Usage: cfm l Approximate Working Torque - 18 ft-lb Drive Size:... 3/8" RPM - Approximate: Torque - Approximate: ft-lb / 33 Nm Weight: lb / 1.2 kg ength: in / 267 mm Air Usage: cfm l Approximate Working Torque - 24 ft-lb 3105 GENERA DUTY 3205 GENERA DUTY 1/2" Ratchet Wrench 3/8" Ratchet Wrench Excellent for general purpose use Improved gear head extends life Power for tough jobs Composite grip for increased operator comfort Built-in grease fitting for lubrication ease Drive Size:... 1/2" RPM - Approximate: Torque - Approximate: ft-lb / 74 Nm Weight: lb / 1.4 kg ength: in / 368 mm Air Usage: cfm Air Inlet:... 1/4" l Approximate Working Torque - 55 ft-lb Drive Size:... 3/8" RPM - Approximate: Torque - Approximate: ft-lb / 40 Nm Weight: lb / 1.1 kg ength: in / 267 mm Air Usage: cfm l Approximate Working Torque - 30 ft-lb 11

RATCHET WRENCHES 3120 INDUSTRIA DUTY 3220 INDUSTRIA DUTY 1/4" Ratchet Wrench 3/8" Ratchet Wrench Rear exhaust with silencer For smaller fasteners Patented head design for increased durability

12 RATCHET WRENCHES 3120 INDUSTRIA DUTY 3220 INDUSTRIA DUTY 1/4" Ratchet Wrench 3/8" Ratchet Wrench Rear exhaust with silencer For smaller fasteners Patented head design for increased durability Composite grip for increased operator comfort Built-in grease fitting for lubrication ease Patented head design for increased durability Drive Size:... 1/4" RPM - Approximate: Torque - Approximate: ft-lb / 27 Nm Weight: lb / 0.7 kg ength: in / 205 mm Air Usage: cfm l Approximate Working Torque - 20 ft-lb Drive Size:... 3/8" RPM - Approximate: Torque - Approximate: ft-lb / Nm Weight: lb / 1.2 kg ength: in / 277 mm Air Usage:... 4 cfm l Approximate Working Torque - 80 ft-lb 3320 INDUSTRIA DUTY 1/2" Ratchet Wrench Excellent for general purpose use Improved gear head extends life Power for tough jobs Patented head design for increased durability Drive Size:... 1/2" RPM - Approximate: Torque - Approximate: ft-lb / Nm Weight: lb / 1.2 kg ength: in / 277 mm Air Usage:... 4 cfm Air Inlet:... 1/4" l Approximate Working Torque - 80 ft-lb 12

ACCESSORIES 5105 TORQUE WRENCHES Part # Torque Range Square Drive DW-75 0-75 in-lb 1/4" DW-300 0-300 in-lb 3/8" DW-175F 0-175 ft-lb 1/2" CWR SERIES CICK WRENCH Part # Torque Range Square Drive CWR

13 ACCESSORIES 5105 TORQUE WRENCHES Part # Torque Range Square Drive DW in-lb 1/4" DW in-lb 3/8" DW-175F ft-lb 1/2" CWR SERIES CICK WRENCH Part # Torque Range Square Drive CWR in-lb 1/4" CWR in-lb 1/4" CWR-250F ft-lb 3/4" DW SERIES DIA INDICATING DW Series Accuracy is ±3% of indicated reading Bi-directional use for clockwise and counter clockwise auditing ight weight tool design and ergonomic grip ensure operator comfort arge dial face allows quick and easy reference Overall length of tool is designed for comfort. Operator can apply torque without undue strain Prevents cosmetic damage to parts. Edges of wrench are covered in soft rubber Fits standard sockets with ¼" - ½" square drive sizes For metric series add "A" at the end of model number CWR Series Accuracy is ±3% of indicated reading ight weight tool with streamlined design. Operator can apply torque without undue strain due to overall length of tool Fits standard sockets with ¼" - ½" square drive sizes Repeatable and detectable action Micrometer adjustable For Metric Series add "A" at the end of model number 13

ACCESSORIES 5105 GRAVITY-DEFYING BAANCERS TW-00 TW-0 TW-0 and TW-00 Series Gravity defying / true balance" No tension buildup to cause worker fatigue Easy external direct drive tensioning 360

3-ft stranded steel cable 1/8 dia.. TW-3 2.2-6.6 1.0-3.0 4.5-6.0 4.3-ft stranded steel cable 5/32 dia. TW-5 5.5-11.0 2.5-5.0 8.0-10.5 4.3-ft stranded steel cable 5/32 dia. TW-9 9.9-19.8 4.5-9.

TW-30 48.4-66.0 22-30 58.0-65.5 5-ft stranded steel cable 3/16 dia. TW-40 66.0-88.0 30-40 77.5-87.5 5-ft stranded steel cable 3/16 dia. TW-50 88.0-110.0 40-50 100.0-109.

TW-70 132.0-154.0 60-70 144.0-153.0 5-ft stranded steel cable 3/16 dia.

Enclosed spiral spring for added safety Safety chain provision (TW-3 through TW-15 models) Automatic safety lock plus manual drum lock (TW-22 through TW-70) ASB Series Built-in Safety Features:

The sturdy spiral spring is enclosed for greater control and safety Ergonomic Spring Release: The automatic safety lock provides extra control Extended Cable ength: Stainless steel cables allow

14 ACCESSORIES 5105 GRAVITY-DEFYING BAANCERS TW-00 TW-0 TW-0 and TW-00 Series Gravity defying / true balance" No tension buildup to cause worker fatigue Easy external direct drive tensioning 360 upper swivel Safety cable provision Tool clip included TW-50 CAPACITY ANTI-GRAVITY MODE B KG CAPACITY (B) CABE TW stranded steel cable 1/8 dia. TW ft stranded steel cable 1/8 dia.. TW ft stranded steel cable 5/32 dia. TW ft stranded steel cable 5/32 dia. TW ft stranded steel cable 5/32 dia. TW ft stranded steel cable 5/32 dia. TW ft stranded steel cable 3/16 dia. TW ft stranded steel cable 3/16 dia. TW ft stranded steel cable 3/16 dia. TW ft stranded steel cable 3/16 dia. TW ft stranded steel cable 3/16 dia. TW ft stranded steel cable 3/16 dia. TW-3 through TW-70 Series Tapered drum allows true balance throughout cable travel Easy external direct drive tensioning Cast aluminum casing for durability Permanent lubrication 360 top swivel Enclosed spiral spring for added safety Safety chain provision (TW-3 through TW-15 models) Automatic safety lock plus manual drum lock (TW-22 through TW-70) ASB Series Built-in Safety Features: The cable, drum, and enclosed spring are fully visible without opening the unit for easy and convenient safety checks. The sturdy spiral spring is enclosed for greater control and safety Ergonomic Spring Release: The automatic safety lock provides extra control Extended Cable ength: Stainless steel cables allow for extended reach on applications Enhanced Gear Mechanism: Allows for more exact adjustment of tension No Recoil and ow Resistance: Tapered drum style provides gravity defying tool positioning and low travel ASB-OC Gravity Defying and Hand Adjustable Balancer ASB-3C ASB-5C MODE CAPACITY STROKE WEIGHT ASB-0C lb kg 51.1 in 130 cm 1.5 lb 0.7 kg ASB-3C lb kg 86.4 in 220 cm 3.0 lb 1.4 kg ASB-5C lb kg 86.4 in 220 cm 3.4 lb 1.5 kg 14

ACCESSORIES 5105 RETRACTORS The reinforced hanging bracket includes

RPA Series No tools needed for setting of tension Five foot nylon coated

5-1.5 lb 0.2-0.7 kg 5' (152 cm) RPA-2 1.5-3.0 lb 0.7-1.

3 kg 5' (152 cm) RMA- Series External tension adjustment Ratchet cable lock

Part # Approximate Capacity Stroke RMA-7 5-10 lb 2.3-4.

8-10.4 kg 8' (244 cm) 5105 FR UNITS AFR-2-C AFR-3-C Compact FR 7070 Compact

increase the life of your tools, we recommend that you install an Eagle

Filter: Traps the moisture before it enters the air tool Regulator: Adjusted

Allows the proper amount of lubrication needed for top performance MODE PORT

1/4" 1/8" 60 1,700 yes AFR-3 3/8" 1/4" 140 4,000 yes AFR-3-C 3/8" 1/4" 105

ININE REGUATORS Inline regulators allow easy adjustment of the airflow to

15 ACCESSORIES 5105 RETRACTORS The reinforced hanging bracket includes provision for a safety cable. A tool clip is included with each retractor. RPA Series No tools needed for setting of tension Five foot nylon coated steel cable Adjustable cable stop Part # Approximate Capacity Stroke RPA lb kg 5' (152 cm) RPA lb kg 5' (152 cm) RPA lb kg 5' (152 cm) RMA- Series External tension adjustment Ratchet cable lock Steel housing with polyester finish Eight foot x 3/32" coated steel cable Part # Approximate Capacity Stroke RMA lb kg 8' (244 cm) RMA lb kg 8' (244 cm) RMA lb kg 8' (244 cm) 5105 FR UNITS AFR-2-C AFR-3-C Compact FR 7070 Compact FR AFR-4HTA Standalone Unit AFR-3 AFR-4 AFR-8 Full Size FR In order to increase the life of your tools, we recommend that you install an Eagle filter, regulator and lubricator between the air supply and power tool. Filter: Traps the moisture before it enters the air tool Regulator: Adjusted to the correct air pressure, maintaining consistent performance ubricator: Allows the proper amount of lubrication needed for top performance MODE PORT GAUGE PORT FOW RATE BOW SHIED CFM /MIN AFR-2 1/4 1/8 70 2,000 yes AFR-2-C 1/4" 1/8" 60 1,700 yes AFR-3 3/8" 1/4" 140 4,000 yes AFR-3-C 3/8" 1/4" 105 3,000 yes AFR-4 1/2" 1/4" 140 4,000 yes AFR-8 1" 1/4" 180 5,000 yes 5105 ININE REGUATORS Inline regulators allow easy adjustment of the airflow to each tool with the turn of a dial Installed inline with the air line immediately before the tool's air inlet fitting Part # Description A 1/4" NPT /8" NPT 15

ACCESSORIES 5105 COIED HOSES Durable polyurethane hose Assemblies include reusable swivel fitting Approximate burst

ASH-250C-10MSZ 3/8" 1/4" 10' ASH-250C-15MSZ 3/8" 1/4" 15 ASH-250C-25MSZ 3/8" 1/4" 25' ASH-375C-15MSZ 9/16" 3/8" 10'

FOOT Durable polyurethane hose Excellent recoil memory Maximum flexibility and lightweight Transparent hose color

1/4" ID 3/8" ID 1/2" ID 5105 AIR HOSE FITTING Rigid 375-RZ Swivel 375-SZ 500-SZ Provides air hose connections Swivel

500-SZ Description 1/4" NPT Rigid 1/4" NPT Swivel 3/8" NPT Rigid 3/8" NPT Swivel 1/2" NPT Swivel 5105 BRASS QUICK

designed for use with ergonomic twist plugs.

16 ACCESSORIES 5105 COIED HOSES Durable polyurethane hose Assemblies include reusable swivel fitting Approximate burst pressure F Working temperature -104 F to +175 F Ask about full reel pricing Part # OD ID ength ASH-250C-10MSZ 3/8" 1/4" 10' ASH-250C-15MSZ 3/8" 1/4" 15 ASH-250C-25MSZ 3/8" 1/4" 25' ASH-375C-15MSZ 9/16" 3/8" 10' ASH-375C-25MSZ 9/16" 3/8" 25' ASH-500C-15MSZ 3/4" 1/2" 15' ASH-500C-25MSZ 3/4" 1/2" 25' 5105 STRAIGHT HOSE BY THE FOOT Durable polyurethane hose Excellent recoil memory Maximum flexibility and lightweight Transparent hose color (opaque available) Custom colors available High chemical resistance Part # ASH-250Z ASH-375Z ASH-500Z Inner Diameter 1/4" ID 3/8" ID 1/2" ID 5105 AIR HOSE FITTING Rigid 375-RZ Swivel 375-SZ 500-SZ Provides air hose connections Swivel fitting helps keep hose from twisting Size fitting to hose size and air flow Part # 250-RZ 250-SZ 375-RZ 375-SZ 500-SZ Description 1/4" NPT Rigid 1/4" NPT Swivel 3/8" NPT Rigid 3/8" NPT Swivel 1/2" NPT Swivel 5105 BRASS QUICK COUPERS B23 B23E B25 Provides simple way of connecting and disconnecting air tools to hose Manual ball couplers designed for use with ergonomic twist plugs. Brass with nitrate seals Rated to 300 PSI, from -40 F to +250 F Size fitting to hose size and air flow Part # B23 B23E B25 Description 1/4" NPT F x 1/4 QC 3/8" NPT F x 1/4 QC 3/8" NPT F x 3/8 QC 16

ACCESSORIES 5105 ERGONOMIC SWIVE COUPERS TS-30NP-2NPT TS-20NP-2NPT Part # TS-30NP-2NPT TS-20NP-2NPT

US Plug x 1/4" NPT Male 3/8" US Plug x 3/8" NPT Male 360 rotation for ease of moving tools 45 angle

TS-30US-3NPT 5105 360 O SWIVE AIR CONNECTOR 7021AG 7041AG Swivel Joint Kits Swivel Air Fitting Part #

5 oz 7041AG 3/8" NPT 3.3 oz 7051 1/2" NPT 6.

17 ACCESSORIES 5105 ERGONOMIC SWIVE COUPERS TS-30NP-2NPT TS-20NP-2NPT Part # TS-30NP-2NPT TS-20NP-2NPT TS-20US-2NPT TS-30US-3NPT Description 3/8 NPT Female x 1/4 NPT Male 1/4" NPT Female x 1/4"NPT Male 1/4" US Plug x 1/4" NPT Male 3/8" US Plug x 3/8" NPT Male 360 rotation for ease of moving tools 45 angle reduces hose bending For most portable non-impacting Size fitting to hose size and air flow TS-20US-2NPT TS-30US-3NPT O SWIVE AIR CONNECTOR 7021AG 7041AG Swivel Joint Kits Swivel Air Fitting Part # Inlet Weight 7025S 1/4" NPT 2.5 oz /4" NPT 2.5 oz 7021AG 1/4" NPT 3.2 oz 7041A 3/8" NPT 2.5 oz 7041AG 3/8" NPT 3.3 oz /2" NPT 6.6 oz 360 rotation for difficult angles For most portable air tools including screwdrivers, drills, grinders, impacts, sanders, and more Size fitting to hose size and air flow 17

ACCESSORIES: BITS & SOCKETS BIT HODERS SOTTED INSERT BITS H 1/4 Part No mm in 1/4 Hex, Magnetic A3BHM-3 75 2.94 A3BHM-6 150 5.

28 SQUARE RECESS POWER BITS Point Part No Size mm in A3S2-3 2 75 2.95 A3S2-6 2 150 5.91 A3S3-3 3 75 2.95 A3S3-6 3 150 5.

76 SQUARE RECESS INSERT BITS Point Part No Size mm in A38S2-1 2 25 0.98 A38S3-1 3 25 0.

98 MAG-O-NETS OD ID Screw Blade Blade Part No Size mm in Thickness Width A3M8-3 8 75 2.95 0.04 0.28 A3M10-3 10 75 2.95 0.05 0.

18 ACCESSORIES: BITS & SOCKETS BIT HODERS SOTTED INSERT BITS H 1/4 Part No mm in 1/4 Hex, Magnetic A3BHM A3BHM PHIIPS POWER BITS Screw Blade Blade Part No Size mm in Thickness Width A38M A38M SQUARE RECESS POWER BITS Point Part No Size mm in A3S A3S A3S A3S PHIIPS INSERT BITS Point Nominal Part No Size Square Size mm in A3R1/ /8" A3R9/ /64" SQUARE RECESS INSERT BITS Point Part No Size mm in A38S A38S SOTTED POWER BITS Point Nominal Part No Size Square Size mm in A38R1/ /8" A38R9/ /64" MAG-O-NETS OD ID Screw Blade Blade Part No Size mm in Thickness Width A3M A3M Additional sizes of bits and sockets are available upon request. Call Eagle Group at l Turn virtually any standard screwdriver bit into a magnetized bit by simply sliding on a Mag-O-Net collar. l An easy, cost-effective alternative to traditional magnetic bit holder and insert bit combination. l Reusable and interchangeable - once a bit is worn out, simply remove and slide onto the next bit. Inner Outer ength Part No (ID) (OD) mm AM1/4Z 7 mm 19 mm 10 mm AM5Z 6 mm 17.5 mm 10 mm AM3/16Z 3/ mm 10 mm 18

19 ACCESSORIES: BITS & SOCKETS STANDARD FASTENER TOOS Connect your tool to the application with Bits, Sockets, and Nutsetters from Eagle. Eagle has assembled the most complete package of commonly used screwdriver bits and nutsetters in the industry. Our goal is to supply you with the highest quality bits and nutsetters for all your fastener needs. If you re in electronics, aerospace, automotive, or general industry, Eagle has the bits and nutsetters to fit your needs. IMPACT SOCKETS SAE METRIC SAE METRIC SAE METRIC SAE METRIC H (6PT) Sq. ØD1 TYPE A D1 D1 D2 D2 PART NO HEX MM IN MM IN MM IN 3/8 Square Drive A31/4 1/ A35/16 5/ A33/8 3/ A306 6 mm A307 7 mm A308 8 mm /8 Square Drive, Deep A mm A mm A mm /8 Square Drive, Magnetic A31/4MP 1/ A35/16MP 5/ A33/8MP 3/ A308MP 8 mm A310MP 10 mm A311MP 11 mm /2 Square Drive A43/8 3/ A47/16 7/ A41/2 1/ A408 8 mm A409 9 mm A mm /2 Square Drive, Deep A43/ / A47/ / A41/ / A mm A mm A mm A mm ØD2 SAE METRIC SAE METRIC SAE METRIC D1 D1 D2 D2 PART NO HEX MM IN MM IN MM IN 1/2 Square Drive, Magnetic A408MP 8 mm A410MP 10 mm A412MP 12 mm /4 Square Drive A611/16 11/ A63/4 3/ A613/16 13/ A mm A mm A mm /4 Square Drive, Deep A611/ / A63/4-4 3/ A613/ / A mm A mm A mm Square Drive A87/8 7/ A815/16 15/ A A mm A mm A mm QUICK CHANGE CHUCKS H SQ D1 D1 PART NO DRIVE HEX MM IN MM IN ADC-2S 1/4 1/ ADC-3S 3/8 1/ ADC-4S 1/2 1/ ADC-3SH7/16 3/8 7/ ADC-4SH7/16 1/2 7/ AEN SOCKETS 1 1 PART NO HEX MM IN MM IN 3/8 Square Drive A31/4C 1/ A304C 4 mm /2 Square Drive A41/4C 1/ A405C 5 mm Sq. 1 Additional types and sizes of fastener tools are available upon request. Contact Eagle at

ACCESSORIES: BITS & SOCKETS EXTENSIONS SOCKET ADAPTERS H Sq. M D H SQ D D PART NO DRIVE HEX MM IN MM IN A375E 3/8 3/8 75 2.95 20 0.79 A405E 1/2 1/2 51 2.01 30 1.18 A610E 3/4 3/4 100 3.94 44 1.

DRIVE MM IN MM IN A302A 3/8 1/4 22 0.87 35 1.38 A403A 1/2 3/8 25 0.98 37 1.46 A504A 5/8 1/2 35 1.38 47 1.46 A604A 3/4 1/2 38 1.50 53 2.09 A806A 1 3/4 50 1.97 70 2.76 A128A 1-1/4 1 60 2.36 76 2.

20 ACCESSORIES: BITS & SOCKETS EXTENSIONS SOCKET ADAPTERS H Sq. M D H SQ D D PART NO DRIVE HEX MM IN MM IN A375E 3/8 3/ A405E 1/2 1/ A610E 3/4 3/ A810E A1220E 1-1/4 1-1/ A1418E 1-1/2 1-1/ A2426E 2-1/2 2-1/ BIT HODERS Sq. FEMAE MAE D D PART NO SQ. DRIVE SQ. DRIVE MM IN MM IN A302A 3/8 1/ A403A 1/2 3/ A504A 5/8 1/ A604A 3/4 1/ A806A 1 3/ A128A 1-1/ A#508A Spline # UNIVERSA SOCKETS H Sq. H D2 1/4 D1 PART NO MM IN 1/4 Hex, Magnetic A3BHM A3BHM A3BHM A3BHM A3BHM D1 D1 D2 D2 PART NO HEX MM IN MM IN MM IN 3/8 Square Drive A310U 10 mm A311U 11 mm /2 Square Drive A412U 12 mm A413U 13 mm Description of Bits and Nutsetters Part Number Nomenclature Precedes Part Number BITS A3S = Phillips Power Drive A3W = Double Ended Phillips A38S = Phillips Insert A39S = Phillips Insert Reduced Nose A3M = Slotted Power Drive A38M = Slotted Insert A3MT = Slotted Power Drive Reduced Nose A3C = Allen Socket Head Power Drive A38C = Allen Socket Head Insert A3R = Square Recess Power Drive A3RT = Square Recess Turned Down (Power) A38R = Square Recess Insert A3T = Torx Power Drive A38T = Torx Insert A3TS = Torq-Set Power Drive A38TS = Torq-Set Insert A3TA = Triangle Power Drive A3TW = Tri-Wing Power Drive A38TW = Tri-Wing Insert A7 = 7/16 Power Drive AS = Electric Type Phillips BITS (Cont.) AM = Electric Type Slotted ATW = ElectricType Tri-Wing AT = Electric Hios Type Torx A26S = Electric Driver Phillips A26M = Electric Driver Slotted A26C = Electric Driver Allen Socket Head A3BHM = Insert Bit Holder (Magnetic Type) A3BHD = Insert Bit Holder (Non Magnetic) NUTSETTERS A3B A3BMP A3BMS A3BMT A3BU MAG-O-NETS = Nutsetter = Magnetic (MP) Pressed Type = Magnetic (MS) Spring oaded = Magnetic (MT) Tube Type = Universal Nutsetter AM = AIMCO Mag-O-Net Contained Within Part Number BITS PZ = Pozidriv PZACR = Pozidriv ACR SDV = Supadriv TR = Torx Tamper Resistant ACRI = ACR Installation ACR = ACR Remove ACRB = ACR 4x4 Both Install and Remove E4 = Electric 4mm diameter E5 = Electric 5mm diameter RS = Reduced Shank 20 Additional types and sizes of fastener tools are available upon request. Contact Eagle at

ACCESSORIES: BITS & SOCKETS PHIIPS POWER BITS NUTSETTERS H Double-Ended POINT PART NO SIZE MM IN A3S0-2 0 50 1.97 A3S1-2 1 50 1.97 A3S1-2.75 1 70 2.76 A3S1-3 1 75 2.95 A3S1-3.5 1 90 3.

94 A3W2-6 2 150 5.91 A3W2-8 2 200 7.87 A3W2-10 2 250 9.84 A3W2-12 2 300 11.81 A3W3-2 3 50 1.97 A3W3-3 3 75 2.94 A3W3-4 3 100 3.94 A3W3-6 3 150 5.91 A3W3-8 3 200 7.

21 ACCESSORIES: BITS & SOCKETS PHIIPS POWER BITS NUTSETTERS H Double-Ended POINT PART NO SIZE MM IN A3S A3S A3S A3S A3S A3S A3S A3S A3S A3S A3S A3W A3W A3W A3W A3W A3W A3W A3W A3W A3W A3W A3W A3W A3W PART NO HEX MM IN A3B1/4-2 1/ A3B1/ / A3B5/16-2 5/ A3B5/ / A3B3/8-2 3/ A3B3/ / A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm A3B mm TORX POWER BITS TORX PART NO SIZE MM IN A3T6-2 T A3T7-2 T A3T T A3T7-3.5 T A3T7-6 T A3T8-2 T A3T T Additional types and sizes of fastener tools are available upon request. For custom parts, please contact us for more information

22 WARRANTY INFORMATION NEW TOO AND ACCESSORY WARRANTY Any new tool or accessory branded with the Eagle name, and purchased from EAGE GROUP (EAGE), or through one of its authorized distributors or agents, is warranted to the original buyer against defects in materials and workmanship for a period of one (1) year* from date of delivery. Under the terms of this warranty, EAGE GROUP will repair or replace any product or accessory warranted hereunder and returned freight prepaid proving to EAGE GROUP's satisfaction to be defective as a result of workmanship or materials. In order to qualify for this warranty, written notice to EAGE GROUP must be given immediately upon discovery of such defect, at which time EAGE GROUP will issue an authorization to return the tool. The defective item must be promptly returned to an authorized EAGE GROUP service center with all freight charges prepaid. REPAIRED TOO WARRANTY Once a tool is beyond the new product warranty period, as detailed above, EAGE GROUP will provide repair warranty on pneumatic tools for a period of 90 days* beyond the warrantied repair date. EXCUSION FROM WARRANTY This warranty is valid only on products purchased from EAGE GROUP, or through its authorized distributors or agents. EAGE GROUP shall have no obligation pursuant to the EAGE GROUP Warranty with respect to any tools or accessories which in EAGE GROUP's sole judgment have been altered, damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer, or any other person other than an authorized representative of EAGE GROUP, has made any attempt to service or modify the tool or accessory prior to its return to EAGE GROUP under this Warranty. The warranty provision with respect to each such product may be amended by EAGE GROUP from time to time in its sole discretion. The liability of EAGE GROUP hereunder shall be limited to replacing or repairing, at its option, any products which are returned freight prepaid to EAGE GROUP and which EAGE GROUP determines to be defective as described above or, at EAGE GROUP's option, refunding the purchase price of such products. EAGE GROUP reserves the right to make periodic changes in construction or tool design at any time. EAGE GROUP specifically reserves the right to make these changes without incurring any obligation or incorporating such changes or updates in tools or parts previously distributed. THE EAGE GROUP WARRANTY IS IN IEU OF A OTHER WARRANTIES, EXPRESSED OR IMPIED, AND EAGE GROUP EXPRESSY DISCAIMS ANY WARRANTY OF MERCHANTABIITY OR FITNESS FOR A PARTICUAR PURPOSE. THIS WARRANTY SETS FORTH THE SOE AND EXCUSIVE REMEDY IN CONTRACT, TORT, STRICT IABIITY, OR OTHERWISE. THIS WARRANTY IS THE ONY WARRANTY MADE BY EAGE GROUP WITH RESPECT TO THE GOODS DEIVERED HEREUNDER, AND MAY BE MODIFIED OR AMENDED ONY BY A WRITTEN INSTRUMENT SIGNED BY A DUY AUTHORIZED OFFICER OF EAGE GROUP. IMITATION OF IABIITY EAGE GROUP'S IABIITY PURSUANT TO WARRANTY OF THE PRODUCTS COVERED HEREUNDER IS IMITED TO REFUND OF THE PURCHASE PRICE. IN NO EVENT SHA EAGE GROUP BE IABE FOR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS BY THE BUYER. IN NO EVENT SHA EAGE GROUP BE IABE FOR ANY SPECIA, CONSEQUENTIA, INCIDENTA OR OTHER DAMAGES (INCUDING WITHOUT IMITATION, OSS OF PROFIT) WHETHER OR NOT EAGE GROUP HAS BEEN ADVISED OF THE POSSIBIITY OF SUCH OSS, HOWEVER CAUSED, WHETHER FOR BREACH OR REPUDIATION OF CONTRACT, BREACH OF WARRANTY, NEGIGENCE OR OTHERWISE. THIS EXCUSION ASO INCUDES ANY IABIITY WHICH MAY ARISE OUT OF THIRD PARTY CAIMS AGAINST BUYER. THE ESSENTIA PURPOSE OF THIS PROVISION IS TO IMIT THE POTENTIA IABIITY OF EAGE GROUP ARISING OUT OF THIS AGREEMENT AND/OR SAE. Note: The EAGE GROUP Warranty confers specific legal rights, however some states or jurisdictions may not allow certain exclusions or limitations within this warranty. * All warranty periods addressed herein are determined using a standard shift, eight-hour work day. EAGE GROUP Attn: Service Department SE Pine Street Portland, OR

23 NOTES 23

TM CORPORATE HEADQUARTERS 10000 SE Pine Street Portland, Oregon

31125 Phone: (01-614) 380-1010 Fax: (01-614) 380-1019 AIMCO

Medellin; Colombia 050021 AIMCO EUROPE Dibao Plaza Avenida Río

0086-21-34319246 Fax: 0086-21-34319245 AIMCO SOUTH KOREA B-1213,

24 TM CORPORATE HEADQUARTERS SE Pine Street Portland, Oregon Phone: (503) Toll Free: AIMCO CORPORATION DE MEXICO SA DE CV Ave. Cristobal Colon Chihuahua, Chihuahua Phone: (01-614) Fax: (01-614) AIMCO SOUTH AMERICA Carrera 29A, #7B-91. Origami Building. Int604. Medellin; Colombia AIMCO EUROPE Dibao Plaza Avenida Río Gallo, Galápagos - Guadalajara Spain Phone: AIMCO CHINA Room 607, No Hongxin Rd Minhang District, Shanghai China Phone: Fax: AIMCO SOUTH KOREA B-1213, 167, Songpa-Daero Songpa-Gu, Seoul South Korea Phone: Cell: IT-E380 Rev , Printed in USA, 2017 AIMCO

POWER TOOL SOLUTIONS TM FOR VEHICLE SERVICES

POWER TOOL SOLUTIONS TM FOR VEHICLE SERVICES POWER TOO SOUTIONS TM FOR VEHICE SERVICES Abrasive Tools Impact Wrenches Drills TM POWER TOO SOUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for