CHAIN HOISTS & EQUIPMENT. ACCOLIFT CLH 1/2 to 2 TON CAPACITY HOISTS. ACCOLIFT 1 to 20 TON CAPACITY HOISTS

Transcription

1 IN OISTS & QUIPMNT OLIT L 1/2 to 2 TON PITY OISTS OLIT 1 to 20 TON PITY OISTS

2 TL O ONTNTS ccolift L oists oist eatures ook Suspension oists /Pull Trolley oists Motorized Trolley oists ook and hain ucket imensions ccolift oists oist eatures ook Suspension oists /Pull Trolley oists Motorized Trolley oists ook and hain ucket imensions Pull nd Trucks and hain oists Trolleys Plain Trolleys Geared Trolleys Motorized Trolleys Lever oists and hain and Lever oists ook imensions Low eadroom oists Inverter ontrol / Motorized Trolley oists..19 ook and hain ucket imensions TURS OMPRISON OLIT L OLIT OOK MOUNT Standard Standard PUS-PULL TROLLY Standard Standard MOTORIZ TROLLY Standard Standard STON STYL MNIL LO RK N/ Standard OVRLO LUT Standard N/ UIL OVRLO VI Optional Standard INSPTION OVR TO INSPT ML N/ Standard INSPTION OVR TO INSPT IN L Standard N/ SINGL PS MOLS Standard Optional TR PS MOLS Standard Standard V ONTROLS Optional Optional RUNNING TIM MTR Standard V unit only YL OUNT Standard on ss models N/ UPPR LIMIT SIT Micro Switch Micro Switch LOR LIMIT SIT lutch Micro Switch ROSS MOUNT ONNTOR Optional Optional SIVL TROLLYS N/ Optional TR OVR Optional Optional IN ONTINR Standard Standard NIKL PLT LO IN Optional Optional STINLSS STL LO IN Optional Optional SPRK RSISTNT TURS Optional Optional 2

3 OLIT L OISTS - TURS riction lutch & Upper Limit Switch The friction clutch is an overload protection device that prevents lifting when overloaded. hen the hoist is raised to high hook, the upper limit switch activates and stops the hoist motor (up direction only). This prevents unnecessary clutch wear. oist Motor rake Simple fast acting conical style motor brake for years of trouble free operation. utton ontrol ompact design to enable one-handed operation. Rated NM 4 protection. Mushroom on/off button included. button cable has strain relief built in to prevent cable damage. lectric ontrol Panel Single speed hoists are reconnectable for 115/ on single phase hoists and 230/ on three phase hoists. Single speed controls include a running time meter and counter for hoist motion. ontrols are housed in a NM 12 enclosure. Standard control transformer output is 115V with an option available for 48V. Standard power supply cord length is 15'. Variable requency rive V hoists are available programmed for 2- speed operation. V hoists can be supplied for , and power supplies. Inverter provides run time for maintenance operations. eavy-uty oist Motor The hoist motor is a high torque design and is rated 30-minute duty (single phase, single speed motors are rated 20-minute). lass motor insulation and standard thermal motor protection is included. Load Sheave / hain Guide ull floating chain guide assures proper engagement of chain on load sheave. Load Sheave features 5 pockets for smoother operation and better distribution of the load. oist body includes a port for visual inspection of the load sheave. ooks Load hook is a forged carbon steel hook with a heavy-duty hook latch. Thrust bearing in hook allows 360 rotation to prevent twisting of load chain. Top hook, for hook suspended hoists, is nonrotating. ullard hooks, Stainless Steel hooks and ronze hooks are available as an option. hain ontainer hain container is standard equipment and is molded with thick polypropylene material to securely contain the chain and chain lubricant. Optional canvas containers and engineered containers for long lift applications are available as an option. Gear ox / Oil Lubrication The gearbox utilizes an alloy steel helical and spur gear reduction. Gear lubrication is easily accessible from the top of the hoist. The gearbox includes an inspection port for the chain pocket wheel. ood grade oil is available as an option. / Pull Trolley Trolley is adjustable for a range of 3.25 to 12 flange widths with no additional materials required. Side guide rollers are included to promote smooth trolley motion and to minimize wheel and beam wear. heels are dual tread design for operation on tapered or flat flange beams. Trolleys include drop down lugs and rubber bumpers as standard equipment. Motorized Trolley Trolley is adjustable for a range of 3.25 to 12 flange widths with no additional materials required. Side guide rollers are included to promote smooth trolley motion and to minimize wheel and beam wear. heels are dual tread design for operation on tapered or flat flange beams. Trolleys include drop down lugs and rubber bumpers as standard equipment. Trolley motor includes class insulation and a disc type motor brake. Motor is rated for 30-minute duty (single phase, single speed motors are rated 20-minute) and includes standard thermal motor protection. Load hain Grade 80 load chain is case hardened and has a high resistance to wear and corrosion. ll hoists are stocked with 20 feet of lift. Longer lifts are available per requirement. Nickel Plated load chain and Stainless Steel load chain is available as an option. 3

4 OLIT L OISTS - OOK SUSPNSION SINGL PS / SINGL SP OOK SUSPNSION ap. utton ord ing P oist Motor 115V mp. raw Load hain iameter X hain all dd l t. 1/ / x (1) / x (1) / x (2) SINGL PS / INVRTR ONTROL OOK SUSPNSION ap. utton ord ing P oist Motor 115V mp. raw Load hain iameter X hain all dd l t. 1/ V / / x (1) V / / x (1) V / / x (2) See model V on page 12. TR PS / SINGL SP OOK SUSPNSION ap. utton ord ing P oist Motor mp. raw Load hain iameter X hain all dd l t. 1/ / x (1) / x (1) / x (2) TR PS / INVRTR ONTROL OOK SUSPNSION ap. utton ord ing P oist Motor mp. raw Load hain iameter X hain all dd l t. 1/ V / / x (1) V / / x (1) V / / x (2)

5 IMNSIONS - OOK SUSPNSION igure igure imensions in Inches (Nominal). or hook dimensions, see page 10. igure V V V V V V

6 OLIT L OISTS - PUS / PULL TROLLY SINGL PS / SINGL SP PUS / PULL TROLLY ap. utton ord ing 1/ PT / to x (1) PT / to x (1) PT / to x (2) SINGL PS / INVRTR ONTROL PUS / PULL TROLLY ap. 1/ V PT / / to x (1) V PT / / to x (1) V PT / / to x (2) See model V PT on page 14. TR PS / SINGL SP PUS / PULL TROLLY ap. utton ord utton ord P ing oist Motor mp. raw 115V P oist Motor oist Motor ing mp. raw P mp. raw lange idth djustability lange idth djustability heel iameter lange idth djustability heel iameter eam heel iameter eam eam Load hain iameter X hain all Load hain iameter X hain all Load hain iameter X hain all dd l dd l dd l 1/ PT / to x (1) PT / to x (1) PT / to x (2) TR PS / INVRTR ONTROL PUS / PULL TROLLY ap. utton ord oist Motor ing mp. raw P lange idth djustability heel iameter eam Load hain iameter X hain all dd l 1/ V-PT / / to x (1) V-PT / / to x (1) V-PT / / to x (2) t. t. t. t. 6

7 IMNSIONS - PUS / PULL TROLLY igure igure K K I J I J imensions in Inches (Nominal). or hook dimensions, see page 10. I J K igure = eam width PT PT PT V-PT V-PT V-PT PT PT PT V-1-PT V-1-PT V-1-PT

8 OLIT L OISTS - MOTORIZ TROLLY SINGL PS / SINGL SP MOTORIZ TROLLY ap. utton ord ing Trolley oist Motor P 115V mp. raw P Trolley Motor mp. raw 115V lange idth djustability Standard heel ia. eam Load hain iameter X hain all dd l t. 1/ / / to x (1) / / to x (1) / / to x (2) SINGL PS / INVRTR ONTROL MOTORIZ TROLLY ap. utton ord ing Trolley oist Motor P 115V mp. raw P Trolley Motor mp. raw 115V lange idth djustability Standard heel ia. eam Load hain iameter X hain all dd l t. 1/ V /9 75/ / / to x (1) V /9 75/ / / to x (1) V /4 75/ / / to x (2) See model V on page 16. TR PS / SINGL SP MOTORIZ TROLLY ap. utton ord ing Trolley P oist Motor mp. raw P Trolley Motor mp. raw lange idth djustability Standard heel ia. eam Load hain iameter X hain all dd l t. 1/ / / to x (1) / / to x (1) / / to x (2) TR PS / INVRTR ONTROL MOTORIZ TROLLY ap. utton ord ing Trolley P oist Motor mp. raw P Trolley Motor mp. raw lange idth djustability Standard heel ia. eam Load hain iameter X hain all dd l t. 1/ V /9 75/ / / to x (1) V /9 75/ / / to x (1) V /4 75/ / / to x (2)

9 IMNSIONS - MOTORIZ TROLLY igure igure K K I J I J I J imensions in Inches (Nominal). or hook dimensions, see page 10. I J K igure V V V V V V

10 OLIT L OISTS - OOK IMNSIONS & IN ONTINR PITIS OLIT L OISTS - OOK IMNSIONS imensions in Inches (Nominal) apacity 1/2 Ton Ton Ton OLIT L OISTS - IN ONTINR PITIS oist apacity Max. ith Standard Max. ith Optional Max. ith Optional hain ucket hain ucket anvas hain ag 1/2 Ton 39 ( ) 49 ( ) 40 ( ) 1 Ton 39 ( ) 49 ( ) 40 ( ) 2 Ton 25 ( ) or 65 ( ) 20 ( ) uckets may be available for longer lifts than stated above - please call factory with your application. 10

11 OLIT OISTS - TURS eston Style Mechanical Load rake eston Style Mechanical Load rake, working in conjunction with disc type motor brake, provides a dual braking system for load lowering control. Mechanical Load rake can easily be inspected thru the inspection port provided on the top of the gearbox. oist Motor rake oist motor brake is a direct acting rectified brake with exceptional stopping power providing cooler operating temperatures for the motor. lectric brake is designed for easy access and simple maintenance. Overload lert Overload lert is a current sensing device that stops the up motion of the hoist and sets off an audible alarm when the hoist motor draws too many amps due to an overload condition. hen the hoist is lowered, the alarm stops and the overload device is reset. utton ontrol ompact design to enable one-handed operation. Rated NM 4 protection. Mushroom on/off button included. button cable has strain relief built in to prevent cable damage. lectric ontrol Panel Single speed hoists are reconnectable for 230/ power supply. ontrols are housed in a NM12 enclosure. Standard control transformer output is 115V with an option available for 48V. Standard power supply cord length is 15'. Variable requency rive V hoists are available programmed for 2- speed operation. V hoists can be supplied for , and power supplies. Inverter provides run time for maintenance operations. eavy-uty oist Motor The hoist motor is a high torque design and is rated 30-minute duty. lass motor insulation and standard thermal motor protection is included. Load Sheave / hain Guide ull floating chain guide assures proper engagement of chain on load sheave. Load Sheave features 4 or 5 pockets (depending on model) for better distribution of the load. Load hain Grade 80 load chain is case hardened and has a high resistance to wear and corrosion. ll hoists are stocked with 20 feet of lift. Longer lifts are available per requirement. Nickel Plated load chain and Stainless Steel load chain is available as an option. ooks Load hook is a forged carbon steel hook with a heavy-duty hook latch. Thrust bearing in load hook allows 360 rotation to prevent twisting of load chain. Top hook, for hook suspended hoists, is nonrotating. ullard hooks, Stainless Steel hooks and ronze hooks are available for some models as an option. ontact factory. hain ontainer hain container is standard equipment and is either molded with thick polypropylene material or fabricated from steel to securely contain the chain and chain lubricant. Optional canvas containers and engineered containers for long lift applications are available as an option. Gear ox / Oil Lubrication The gearbox utilizes an alloy steel helical and spur gear reduction. n access port is included on the top of the gear box to allow visual inspection of the mechanical load brake. Lubrication is easily maintained from the top of the hoist. / Pull Trolley Trolley is adjustable for a range of 3.25 to 12 flange widths with no additional materials required. Side guide rollers are included to promote smooth trolley motion and to minimize wheel and beam wear. heels are dual tread design for operation on tapered or flat flange beams. Trolleys include drop down lugs and rubber bumpers as standard equipment. Motorized Trolley Trolley is adjustable for a range of 3.25 * to 12 flange widths with no additional materials required. Side guide rollers are included to promote smooth trolley motion and to minimize wheel and beam wear. heels are dual tread design for operation on tapered or flat flange beams. Trolleys include drop down lugs and rubber bumpers as standard equipment. Trolley motor includes class insulation and a disc type motor brake. Motor is rated for 30-minute duty and includes standard thermal motor protection. * 5" to 12" on 7-1/2T model. 11

12 OLIT OISTS - OOK SUSPNSION SINGL SP OOK SUSPNSION ap. utton ord ing P oist Motor mp. raw Load hain iameter X hain all dd l t / x (1) / x (1) / x (2) / x (1) / x (2) / x (1) / x (2) / x (3) x (2) 34.4/ x (4) x (2) 34.4/ x (6) x (2) 34.4/ x (8) INVRTR ONTROL OOK SUSPNSION ap. utton ord ing P oist Motor mp. raw Load hain iameter X hain all dd l V / / x (1) V / / x (1) V / / x (2) V / / x (2) V / / x (1) V / / x (2) V / / x (3) V /4 4.7 x (2) 34.4/ x (4) V /3 4.7 x (2) 34.4/ x (6) V /2 4.7 x (2) 34.4/ x (8) t. 12

13 IMNSIONS - OOK SUSPNSION igure 1 TO 5 TON OOK SUSPNSION OISTS: igure 2 2 imensions in Inches (Nominal). or hook dimensions, see page 18. 2* igure V * Inverter ontrol s only. 7-1/2 TON OOK SUSPNSION OIST: igure 10 TON TO 20 TON OOK SUSPNSION OISTS: igure 13

14 OLIT OISTS - PUS / PULL TROLLY SINGL SP PUS / PULL TROLLY ap. utton ord ing P oist Motor mp. raw lange idth djustability heel iameter eam Load hain iameter X hain all dd l PT / to x (1) PT / to x (1) PT / to x (2) PT / to x (1) PT / to x (2) PT / to x (1) PT / to *.441 x (2) INVRTR ONTROL PUS / PULL TROLLY ap. utton ord ing P V-PT / / to x (1) V-PT / / to x (1) V-PT / / to x (2) V PT / / to x (2) V-PT / / to x (1) V-PT / / to *.441 x (2) * pplies to a beam flange width of 4" and over. oist Motor mp. raw lange idth djustability heel iameter eam Load hain iameter X hain all dd l t. t. 14

15 IMNSIONS - PUS / PULL TROLLY 1 TO 5 TON PUS / PULL TROLLY OISTS: igure igure K K I J I J J2 J2 imensions in Inches (Nominal). or hook dimensions, see page 18. I J J2* K igure = eam width PT PT PT PT PT V PT PT PT * Inverter ontrol s only. 15

16 OLIT OISTS - MOTORIZ TROLLY SINGL SP MOTORIZ TROLLY ap. utton ord ing Trolley P oist Motor mp. raw P Trolley Motor mp. raw / / to x (1) / / to x (1) / / to x (2) / / to x (1) / / to x (2) / / to x (1) / / to *.441 x (2) / x (2) 9.6/ to **.441 x (3) x (2) 34.4/ x (2) 9.6/ to **.441 x (4) x (2) 34.4/ x (2) 9.6/ to **.441 x (6) x (2) 34.4/ x (2) 9.6/ to **.441 x (8) INVRTR ONTROL MOTORIZ TROLLY ap. utton ord ing Trolley oist Motor mp. raw P P Standard heel ia. eam Load hain iameter X hain all dd l V /7 50/ / / to x (1) V /7 50/ / / to x (1) V /5 50/ / / to x (2) V /5 50/ / / to x (2) V /7 50/ / / to x (1) V /4 50/ / / to *.441 x (2) V /3 50/ / x (2) 9.6/ to **.441 x (3) V /4 50/ x (2) 34.4/ x (2) 9.6/ to **.441 x (4) V /3 40/ x (2) 34.4/ x (2) 9.6/ to **.441 x (6) V /2 40/ x (2) 34.4/ x (2) 9.6/ to **.441 x (8) Trolley Motor mp. raw lange idth djustability lange idth djustability Standard heel ia. eam Load hain iameter X hain all dd l t. t. * pplies to a beam flange width of 4" and over. ** ontact factory with application. 16

17 IMNSIONS - MOTORIZ TROLLY igure 1 TO 5 TON MOTORIZ TROLLY OISTS: igure 2 2 K K I J I J J2 J2 imensions in Inches (Nominal). or hook dimensions, see page 18. 2* I J J2* K igure = eam width V * Inverter ontrol s only. 7-1/2 TON MOTORIZ TROLLY OIST: igure 10 TON TO 20 TON MOTORIZ TROLLY OISTS: igure K K I J I J 17

18 OLIT OISTS - OOK IMNSIONS & IN ONTINR PITIS OLIT OISTS - OOK IMNSIONS imensions in Inches (Nominal) apacity 1 Ton Ton Ton Ton /2 Ton Ton Ton Ton OLIT OISTS - IN ONTINR PITIS oist apacity Max. ith Standard Max. ith Optional Max. ith Optional hain ucket hain ucket anvas hain ag T (17 PM) 1T (27 PM) 2T (13 PM) 2T (27 PM) 49 ( ) 130 ( ) 40 ( ) 49 ( ) 130 ( ) 40 ( ) 24 ( ) 65 ( ) 20 ( ) 20 ( ) 59 ( ) 15 ( ) 57 ( ) T (17 PM) 39 ( ) N/ ( ) T (21 PM) 20 ( ) 59 ( ) 15 ( ) 46 ( ) T (11 PM) 30 ( ) N/ ( ) T (7 PM) 10T (11 PM) 20 ( ) 49 ( ) N/ 49 ( ) 59 ( ) N/ Steel buckets may be available for longer lifts than stated above - please call factory with your application. uckets custom designed for 15T & 20T hoists as application requires. 18

19 LO ROOM OISTS LO ROOM OISTS - INVRTR ONTROL / MOTORIZ TROLLY ap. utton ord ing Trolley P oist Motor mp. raw V-L /6 75/ / / to X (1) V-L /3 75/ / / to X (2) V-L 15/5 65/ / / to X (2) V-L 11/4 65/ / / to X (2) P Trolley Motor mp. raw lange idth djustability Standard heel ia. Load hain iameter X hain all dd l t. igure igure (Refer to page 3 for hoist features.) (Refer to page 3 for hoist features.) K K I J I J M M L L N N igure (Refer to page 11 for hoist features.) K I J M L N imensions in Inches (Nominal). or hook dimensions, see page 20. I J K L M N igure V-L V-L V-L V-L

20 LO ROOM OISTS LO ROOM OISTS - OOK IMNSIONS imensions in Inches (Nominal) apacity 1 Ton Ton Ton Ton LO ROOM OISTS - IN ONTINR PITIS oist apacity Max. ith Standard Max. ith Optional Max. ith Optional hain ucket hain ucket anvas hain ag V-L 1T 39 ( ) 49 ( ) 40 ( ) 25 ( ) or V-L 2T ( ) V-L 3T 39 ( ) V-L 5T 30 ( ) 65 ( ) 20 ( ) 57 ( ) N/ 81 ( ) 46 ( ) N/ 65 ( ) 20

21 SRIS 421 PUS-PULL N TRUKS or Underhung Single Girder ranes esigned for light or medium loads, Series 421 -Pull nd Trucks are the basic component for easy-to-assemble underhung cranes. urnished with heat treated gray iron wheels for 2 ton maximum crane capacities. Maximum crane span is nd truck frames include drop lugs. heels are 4" diameter, flanged, dual tread permitting operation on standard "I" beams or flat flange beams. heels incorporate shielded, lifetime lubricated, single row ball bearings. nd trucks are shipped with crane fabrication instructions and mounting hardware. ridge beam and end stops are by others. 4-9/16 Minimum Overhang 2-3/8 43-1/2 Overall 38 heelbase Runway y Others 1/2 4-3/8 1-1/2 ridge eam y Others 1-3/4 1-3/4 Runway eam lange + 1-1/8 Y ap. Size Runway eam Max. llowable Load on ach heel eight rane abricating and learance imensions apacity Span (eet) Recommended ridge eams Y (Inches) x 12.5# x 18.4# 2-1/ x 25.4# 2-3/ x 31.8# x 18.4# 2-1/ x 25.4# 2-3/ x 31.8# x 42.9# 3-1/2 arning: Only competent personnel familiar with standard fabrication practices should be employed to assemble these cranes because of the necessity of properly interpreting these instructions and for the purposes of determining appropriate compatible equipment and product applications. O disclaims and responsibility for the quality of workmanship employed in the fabrication of a crane according to these instructions or the sufficiency of the system in which and to which this system or equipment is to be installed or the sufficiency of the system to sustain any particular load that may be imposed upon it. ontact O for additional information if necessary. 21

22 N IN OISTS OLIT portable, lightweight hand hoists are compact and provide a dependable working tool for: industrial maintenance, construction sites, machine shops, and production situations where parts need to be positioned accurately but infrequently. onstruction eatures: ooks: ll hooks are drop forged, heat treated steel with spring type latches. oth hooks rotate 360 for easy rigging. Mechanical Load rake: an hold a capacity load stationary at any position. and hain: lectric welded, close link galvanized coil chain, accurately and uniformly sized to seat properly in handwheel pockets. Load Sheaves: eep cast pockets precisely fit the load chain. Load shafts are supported by prelubricated bearings for smooth operation. Load hain: lectric welded alloy steel chain is heat treated for wear resistance and strength. ccurately and uniformly sized to seat properly in load sheaves. rame: abricated rolled steel plate. overs: Protective steel covers can easily be removed for inspection and maintenance. Options: Optional equipment available for this product includes chain container, weather cover, nickel plated load chain, stainless steel load chain, bronze hooks, stainless steel hooks and nickel plated hoist body. Please contact the factory for more information. or hook dimensions and options, see page 26. and Pull to ap. hain ull Load rop hain Overhaul Ratio imensions Load hain iameter X hain all eight for dd'l 1 ft. of lift / : X (1) / : X (1) : X (1) : X (1) : X (1) : X (1) : X (2) : X (2) : X (2) : X (2) : X (4) : X (4) eight 22

23 PLIN TROLLYS OLIT Plain Trolleys are light and easy to adapt to a wide range of beams. The trolley wheels include lifetime lubricated ball bearings for maintenance free operation. perfect match to make the OLIT electric or hand chain hoist and its load horizontally mobile. onstruction eatures: Side rame: Side plates are rugged rolled steel G heels: rown tread allows operation on tapered or flat flange beams earings: Shielded, lifetime lubricated, single row ball bearings. Suspension Lug: Pivot mounted suspension shaft designed to equally distribute the load to all wheels. Options: Optional equipment available for this product includes bronze wheels and nickel plated body. Please contact the factory for more information. imensions in Inches (Nominal) ap. eam idth - Max. imensions G eam Size eam eight /2 3 to to to to to GR TROLLYS OLIT Geared Trolleys are light and easy to adapt to a wide range of beams. The trolley wheels include lifetime lubricated ball bearings for maintenance free operation. perfect match to make the OLIT electric or hand chain hoist and its load horizontally mobile for short distances and accurate load positioning. onstruction eatures: Side rame: Side plates are rugged rolled steel heels: rown tread allows operation on tapered or flat flange beams earings: Shielded, lifetime lubricated, single row ball bearings. and hain: lectric welded, close link galvanized coil chain, accurately and uniformly sized to seat properly in handwheel pockets. hain Guide: Steel chain guide. Suspension Lug: Pivot mounted suspension shaft designed to equally distribute the load to all wheels. Options: Optional equipment available for this product includes bronze wheels, stainless steel hand chain and nickel plated body. Please contact the factory for more information. G imensions in Inches (Nominal) ap. eam idth - Max. and hain rop imensions G eam Size eam eight /2 3 to to to to to to

24 MOTORIZ TROLLYS ccolift Motorized Trolleys are rugged in design and built to be flexible right out of the box. ach trolley is adjustable for a beam flange range of 3.25" to 12" with no additional materials required. Side guide rollers are included to promote smooth trolley motion and to minimize wheel and beam flange wear. heels are dual tread design for operation on tapered or flat flange beams. Trolleys include drop down lugs and rubber bumpers as standard equipment. Motor includes class insulation and a disc type motor brake. Motor is rated for 30-minute duty and includes standard thermal protection. Three phase trolleys include a V control, 2-button pendant, control transformer and a 30' power cord. Single phase trolleys include a single speed contactor control, 2-button pendant and a 30' power cord. onstruction eatures: Motor: 30-min duty motor with class insulation, thermal protection and motor brake. Three Phase ontrol: V control programmed for two speed operation. Single Phase ontrol: ontactor control provided for single speed operation. Side rame: Side plates are rugged rolled steel. heels: ual tread design for operation on tapered or flat flange beams. earings: Shielded, lifetime lubricated, single row ball bearings. Suspension Lug: Pivot mounted suspension lug provides equally distributed load to all wheels. ap. Trolley utton ord Power Motor ord mp. raw P 115V lange idth djustability heel iameter eam t V 75/ / to V 75/ / to V 65/ / to V 65/ / to SINGL PS TROLLYS: / to / to igure igure G G J I J I imensions in Inches (Nominal). 24 G I J igure = eam width iameter V V V V

25 LVR OISTS Lightweight, portable, chain type lever operated puller. Increases a worker's efficiency in pulling, lifting, lowering, moving and skidding objects in industrial maintenance, construction and utility company applications. Minimal effort is required to move tons. The short handle and short stroke are designed to operate in tight places. xcellent for stretching cable and fencing, positioning machinery and building components. onstruction eatures: rame/side Plate: Rugged, lightweight steel design supports and protects internal mechanism. Lever/Lever lock: esigned and constructed to be easily operated by one person. elps absorb the shock of the load. an be easily disassembled for maintenance. Operation: Two levers and a knob control the operation of the OLIT Lever oist. The lifting "lock" lever can only be engaged when the hoist chain is slack (not under load). The grip ring is then pulled to engage the load sheave. hoose "Up" or "own" position on the handle to raise or lower the load. Gears: Six tooth pinion gear and four pocket load sheave makes operation easy. Gears are permanently lubricated. Mechanical Load rake: rake can hold a full capacity load stationary in any position. Load is not transferred back to handle during handle advancement. Load hain: lectric welded alloy steel chain is heat treated for wear resistance and strength. ccurately and uniformly sized to seat properly in load sheaves. Load lock: Supports the suspension hook and allows it to rotate 360 under capacity loads. ooks: ll hooks are drop forged, heat treated steel with spring type latches. oth hooks rotate 360 for easy rigging. or hook dimensions, see page 26. ap. Pull to ull Load imensions Load hain iameter X hain all eight for dd'l 1 ft. of lift / X (1) / X (1) / X (1) / X (1) / X (1) / X (1) X (1) X (2) eight 25

26 OOK IMNSIONS N IN OISTS - OOK IMNSIONS: apacity 1/2 Ton Ton Ton Ton Ton Ton LVR OISTS - OOK IMNSIONS: apacity 3/4 Ton /2 Ton Ton Ton OPTIONS OR N IN OISTS ronze wheels, nickel plated trolley and hoist body, nickel plated hand and load chain, bronze coated hook and load block. ronze wheels, bronze load hook and stainless steel load chain. Stainless steel load chain, bottom block and hook. hain container. 26

27 all your cco Material andling sales professional today and put the reliability of ccolift equipment to work at your facility. anada Mexico Robert ebb, Sales Representative anada, ll Provinces Jeff awson, National Sales Manager Montana, Idaho, yoming, Mexico lan opes, istrict Manager Michigan, Indiana, Kentucky, Ohio, est Virginia ndrew Roy, istrict Manager Texas, Oklahoma John Jones, istrict Manager North akota, South akota, Nebraska, Iowa, Missouri, Illinois, Minnesota, isconsin, Kansas ill urke, istrict Manager Pennsylvania, Virginia, New York, New Jersey, Maryland, Vermont, New ampshire, Maine, onnecticut, elaware,.., Massachusetts, Rhode Island Greg Logan, istrict Manager rkansas, Mississippi, Tennessee, Louisiana, North arolina, South arolina, Georgia, labama, lorida Keith Mcolm, istrict Manager rizona, alifornia, Nevada, Utah, Oregon, ashington, olorado, New Mexico, awaii, laska Learn more at: 27

28 sk about these top brand name products from O Material andling Solutions: ire rope hoists and crane components manufactured in capacities from 1 to 25 tons. Patented Track ranes and Monorail Systems. ork-rated lass 1, Groups &, ivision 1 hoist monorail hoist. elow-the-hook lifters; both standard and custom engineered. Louden crane with ay hoist. Industrial trailers and non-powered material handling equipment of all types. RNING: quipment described herein is not designed for, and should not be used for lifting, supporting, or transporting humans. Modifications to upgrade, rerate, or otherwise alter the hoist or crane equipment shall be authorized only by the original manufacturer or qualified professional engineer. ailure to comply with any one of the limitations noted herein may result in serious bodily injury. RRNTY: ll equipment is covered by the following warranties: The Seller warrants to the original using uyer thereof that the goods sold under this agreement are free from defects in workmanship and materials for a period of one year from the date of shipment to the using uyer. No other express warranties are given and no affirmation of Seller or Seller's agents, by word or action, shall constitute a warranty. ny variations in details between the goods quoted herein and those covered in uyer's specifications are due to standards of manufacture not to be construed as exceptions to the specifications. Link aster Steer Industrial Trailer for transporting cylinders. O Material andling Solutions 76 cco rive, ox 792, York, P , , X mail: info@accomhs.com O Material andling Solutions, Printed in the US ulletin P2312 5/17