CRIMAR INDUSTRIAL 6720 E. Camino Principal, Suite 100 Tucson, AZ (520)
|
|
|
- Valentine Beasley
- 5 years ago
- Views:
Transcription
1 RIMR INDUSTRIL 6720 E. amino Principal, Suite 100 Tucson, Z (520) rbeman@crimar.org Series SX Double suction Pump Explanation of Type: SX SX: Split double-suction Pump 100: Diameter of Discharge (mm) 310: Diameter of Impeller (mm) (, ): First utting (Second utting, Third utting) of Impeller Features: FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
2 1. This series of pumps can be used for water supply and drainage in city, delivering water in plants and irrigation and so on, and it can be also used for setting up from rivers with more sands. 2. We adopt the international advanced FD Turbo Software to optimize the design of pump casing and impeller, which not only improves the efficiency and reduce the cost, but also supplies the pump with suitable capacity and head to meet the requirements from consumers. 3. We use the special software and advanced hydraulic model to optimize and design impeller and pump casing, which reduces water lost and improve efficiency. The design point efficiency is 5-15% higher than common kinds of pumps. The material of impeller wear ring is wear-resistant. 4. This series double suction pumps have excellent suction performance; can be operated at high rotating speed. Low speed pump can be selected under the condition of high suction lift. 5. Double suction structure of impeller, double out casing structure of pump casing and shorting distance between bearings as possible make libration reduce and noise lower, so that librating will not happen even operate on ship. 6. Double-casing structure and best material can ensure the wear parts to run for a longer time. 7. Different materials are selected for various medium to meet the site conditions, including: gray iron, ductile iron cast steel, stainless steel, Ni cast iron, copper and other wear materials. Technical Parameter Table Performance Type Impeller Speed r/min Flow m 3 /h Head m Shaft Power kw Motor Power kw Eff. % NPSH m Weight kg SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
3 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
4 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
5 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
6 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
7 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
8 SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
9 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
10 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
11 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
12 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
13 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
14 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
15 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
16 SX D SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
17 SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
18 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
19 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
20 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
21 D SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
22 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
23 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
24 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
25 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
26 SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
27 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
28 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
29 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
30 SX SX , FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
31 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
32 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
33 D SX D FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520) REMN@RIMR.ORG
34 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
35 SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
36 SX SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
37 SX SX SX FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
38 opyright Shijiazhuang Kingda Pump Industry Group o., Ltd FOR DDITIONL INFORMTION REGRDING THE OVE PUMPS PLESE ONTT RIMR INDUSTRIL (520)
Selection Chart Project: Model: Chk d: Date: C C V V V A CAPACITY
Selection Chart Project: Model: Chk d: Date: 45 (Ft) (m) 15.0 HZ (Synchronous Speed - 1800 RPM) 35 C2905-7 25.0 8.0 C1125-17 C15-1170 C2185-885 7.0 TOTAL HEAD 15 6.0 5.0 C1455-1170 V0494-1170 V0554-1170
SD Series. SD, SDA, SDL Series Heavy Duty Submersible Dewatering and Drainage Pumps 415V. Dewatering Pumps. 3 Year Warranty!
SD Series SD, SDA, SDL Series Heavy Duty Submersible Dewatering and Drainage Pumps 41V Dewatering Pumps 3 Year Warranty! SD Series Heavy Duty Submersible Dewatering Drainage Pump 41V Aquaplus SD Series
franklinwater.com 50 Hz 6" STS SERIES Submersible Turbine Pumps
franklinwater.com 5 Hz 6" STS SERIES Submersible Turbine Pumps 2 FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump
Page - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS
HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS APPLICATIONS Buildings Water supply Drainage Water circulation Fire fighting Air conditioning Irrigation Water supply Drainage Waterworks FEATURES Split case design
HORIZONTAL SPLIT CASING PUMP
HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,
2 HYDROO NISO/NIS SERIES 3
NISO/NIS Series PRESENTATION Hydroo Pump Industries SL is an enterprise specialised in the research, development and large-scale production of Stainless Steel centrifugal pumps. We have a vertical integration
SILI PUMP, Your reliable one-stop supplier of marine pumps.
SILI PUMP, Your reliable one-stop supplier of marine pumps. Shanghai SILI PUMP Industry Co., Ltd. Add: No.128 Jinyuan Road, 201518, Shanghai, China (Jinyuan Industry Area) Tel: 0086-21-39109967, fax: 0086-21-39109967
SUBMERSIBLE TURBINE PUMPS
FEATURES 1% factory wet tested with test results shipped with each pump Hydraulic optimization for exceptional abrasive handling Ductile iron motor bracket and discharge for extended pump life Premium
A U S T R A L I A founded 1948
A U S T R A L I A founded 1948... all about moving fluids Regent Pumps Vertical Turbine Pumps has a wide ranging applications. Typical application include:- Water Treatment Plants Water Well Steel Mill
SLOW CENTRIFUGAL PUMP OF DOUBLE-STAGE AND DOUBLE-SUCTION BISECT VOLUTE TYPE
PRODUCT OUTLINE SLOW Centrifugal Pump of Double-stage and Doublesuction Bisect Volute Type is specially designed and manufactured by our company for using in the occasions which require large flux and
SMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
SF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
SUBMERSIBLE TURBINE PUMPS
FEATURES 1% Franklin Electric factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
SUBMERSIBLE TURBINE PUMPS
FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive
SUBMERSIBLE TURBINE PUMPS
FEATURES 100% factory wet tested with test results shipped with each pump Premium ductile iron casting for long life and high pressures Longer discharge and motor bracket bearings for increased pump life
Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.
SJT/SJM CWP Vertical Pump
SJT/SJM CWP Vertical Pump Main Applications Non Pull-out Construction SJT/SJM CWP pumps can be used in the following fields: Cooling water pumps in utility and industrial power stations Water supply Irrigation
5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
ISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
SMD axially split casing, double suction pump
SMD axially split casing, double suction pump Main applications SMD single stage, double suction, axial split casing pumps are designed to meet the needs of the water market for a wide range of raw, clean,
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
8" Submersible Turbine Pump 450 GPM
8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life
Berkeley 8T-550 Submersible Turbine
Berkeley 8T-55 9 3 Nominal RPM: 345 Maximum Working Pressure: 485 PSI 1 8 27 3 HP 9 7 24 25 HP 8 6 21 2 HP 7 5 4 3 18 15 12 9 15 HP 1 HP 6 5 4 3 Efficiency % 2 6 2 1 3 1 1 2 3 4 5 6 7 8.19" (with 6" mtr.)
VM Series Vertical Multistage Pumps. VM Series Multistage Pumps APPLICATIONS WHY CHOOSE THE VM SERIES MULTISTAGE PUMPS? Experts in water.
Experts in water. APPLICATIONS Pumping of clean, non-aggressive liquids, free of fibres in suspension, suitable for applications such as:- Water supply - domestic, rural & industrial Pressure boosting
Submersible Pumps. pool pumps. Material & Working Limits. Submersible Pump Series - QDX
Submersible Pumps Submersible Pump Series - QDX QDX series submersible motor pump is mainly composed of three parts: pump, mechanical seal and motor. Pump is at the bottom part, which adopt centrifugal
SUBMERSIBLE TURBINE PUMPS
" STS SERIES - GPM FEATURES % factory wet tested with test results shipped with each pump Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for
LPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution
Stainless Steel Submersible Pumps DATA BOOKET ISO 1 Company Pumping Solution Hz Photographs of a few Manufacturing Units Submersible Pumps Motors Hz 4 Submersible Pump Pumping Solution 11 Product data
PUMPS. ToronTech. CATALOGUE 2014 TTAAB-Series of Pulp Pumps (ISO) ToronTech.com PRODUCT BROCHURE
TM ToronTech TM ToronTech Torontech is a leading North American based international manufacturer and supplier of pumps, pipes, valves & actuators. The Torontech group has established an extensive network
Series. NV Vertical Multistage Booster Pump
NV Vertical Multistage Booster Pump Series This series of vertical multistage booster pumps offer technically advanced designs to meet market demands including hot water applications. Every NV Series pump
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 LPC4 32 205 LPC4 40 206 LPC4 50 211 LPC4 65 215 LPC4 80 219 LPC4 100 222 LPC4 125 225 LPC4 150 226 - CONSTRUCTIONS
Dimensions: inch. Dimensions: mm
ER Submersible ropeller umps roject: : Chk d: Date: pply to 03, 0713, 0843, 3 ø (ole) 03- (8 OLES) 0713-710 0843-710 3-593 (12 OLES) H 10 20 25 25 120 ( 2) 3 /4 3 /4 3 /4 3 /4 34 1 /4 34 1 /4 34 1 /4 ump
390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
PA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
MMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
HYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
LPC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 32 205 40 206 50 210 65 213 80 216 100 218 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 302 - DIMENSIONS
SJP Vertical Propeller Pumps
Sulzer Pumps SJP Vertical Propeller Pumps The Heart of Your Process Sulzer Pumps Sulzer Pumps is a world leader in reliable products and innovative pumping solutions. Our advanced research and development,
abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
General Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
CENTRIFUGAL PUMPS according to DIN standard
CENTRIFUGAL PUMPS according to DIN 2255 standard End suction centrifugal pumps in accordance with DIN 2255 made of cast iron, applications in water boosting, heating system, airconditioning, washing systems
XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.
SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,
Submersible Dewatering Pumps
Submersible Dewatering Pumps 2 Dewatering Solutions for the Real World In the real world time is money, and worksites have no time for unwanted water. Sulzer has the solutions in a complete pump range
Submersible. Pumps Motors. 60Hz 8 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution 1 Product data Stainless steel submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection
RS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI
RS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI The RS Series The RS is our new process duty, horizontal ring section multi-stage pump. Designed for moderate to high pressure pumping,
Horizontal Double Suction Volute Pump Type CN. Pipe line
PUMP Horizontal Double Suction Volute Pump Type APPLICATIONS Buildings Irrigation Water supply Drainage Water circulation Fire fighting Air conditioning Water supply Drainage Waterworks Water intake Booster
EBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR
EBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR CONTENTS - SPECIFICATIONS SELECTION CHART TYPE KEY AND CURVE SPECIFICATIONS LPC4 32 LPC4 40 LPC4 50 LPC4 65 LPC4 80 LPC4 100 LPC4 125 LPC4 150 - CONSTRUCTIONS SECTIONAL
multiflow Multistage Heavy Duty Axially
2 multiflow Multistage Heavy Duty Axially Multistage Heavy Duty Axially Split Casing Centrifugal Pump PERFORMANCE RANGE Capacity Up to 6000m 3 /h Up to 2600gpm Heads Up to 1000m Up to 32810 feet Temperatures
ST, XT & SU SELF PRIMING PUMPS
ST, XT & SU SELF PRIMING PUMPS VOLUME ONE ISSUED JANUARY, 214 ST, XT & SU SELF PRIMING PUMPS Heavy duty, self priming trash pumps. Reliable dirty water and solids handling pumping performance for water
SF6. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE PUMPS. Page - CONTENTS 100
SPECIFICATIONS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CHART R10 204 PERFORMANCE CHART R13 205 PERFORMANCE CHART S25 206 PERFORMANCE
EBARA LPCD 4-POLIGA CENTRIFUGALA PUMPAR
EBARA LPCD 4-POLIGA CENTRIFUGALA PUMPAR CONTENTS - SPECIFICATIONS SELECTION CHART TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE LPCD4 40 PERFORMANCE CURVE LPCD4 50 PERFORMANCE CURVE LPCD4 65 PERFORMANCE
CP Centrifugal pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS PATENTS - TRADE MARKS - MODELS CONSTRUCTION AND SAFETY STANDARDS
CP Centrifugal pumps PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 74 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
4WN. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE MULTISTAGE PUMPS. Pag
CONTENTS Pag - SPECIFICATIONS 200 PUMP SPECIFICATION 200 MOTOR SPECIFICATION 201 SECELTION CHART 202-203 TYPE KEY AND CURVES SPECIFICATIONS 204-205 PERFORMANCE CURVE 1 206 PERFORMANCE CURVE 2 207 PERFORMANCE
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
CPS. Horizontal Split Case Centrifugal Pump
CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water
SUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
Heavy Duty Slurry Pumps Type Ensival Moret EMW
Heavy Duty Slurry Pumps Type Ensival Moret EMW Heavy Duty Slurry Pumps Type Ensival Moret EMW The EMW pump range has been designed considering historic field experience, coupled with the latest in CFD
Tender Text. Company name: Created by: Phone: Date: 3/13/2017. Product No.: CRE 5-20 AN-FGJ-A-E-HQQE
Tender Text Product No.: 9685315 CRE 5-2 AN-FGJ-A-E-HQQE Product photo could vary from the actual product Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation:
Taro TEXMO INDUSTRIES. 150 mm BOREWELL SUBMERSIBLE PUMPSET PERFORMANCE CHART. Since 1956
Taro 1 mm BOREWELL SUBMERSIBLE PUMPSET TEXMO INDUSTRIES Since 1956 2 PERFORMANCE RELATED SPECIFICATIONS GENERAL INFORMATION Ÿ Recommended voltage range (At motor terminal) : 180-240 V Single Phase - 440
WINNER SUBMERSIBLE MULTISTAGE PUMPS EPA
CONTENTS SPECIFICATIONS Page Features & Applications 100 E xploded View 101 Pump & Motor Specifications 102 Selection Charts 103, 104 Type key 105 PERFORMANCE CURVES Performance Curve 4N1 200 Performance
High Pressure Boiler Feed Pump
DG High Pressure Boiler Feed Pump Application Type DG high pressure boiler feed pumps are used for feeding high pressure boiler or pumping high pressure clean water. The temperature of pumped media is
Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
NP 3153 MT 3~ 430 Te chnical specification
Te chnical specification 29. 2. 27. 2. 25. 2. 23. 22. 21.. 19. 1. 17. 1. 15. 1. 13.. 11.. 9.. 7.. 5. -. 3. 2. 1.. Water, pure Note: Picture might not correspond to the current configuration. General Patented
Manufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR
Mixed Flow Pump type TR Constructional Features Vertical single and multi-stage mixed flow pumps for wet pit installation. Standardised asembly groups: suction, casing, column pipe, discharge bend, rotor
GMZ series Slurry Pump
GMZ series Slurry Pump OPERATION MANUAL HL Mud Cleaning Equipment Co.,Ltd Contents 1. Summarizing 2. Structural Drawing 3. Technical Parameters 4. Points for attention for assembly 5. Operation 6. Care
End suction back pull-out pumps for general industry, mining, rural and building services
End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive
TKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
Data sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
Centrifugal Pumps. 50Hz
SJ 50Hz Non-Submersible Pump Made of cast iron Bipolar/Direct coupling type SJ model Applications General water supply in buildings and apartments, etc Hot and cold water circulation Supply of industrial
MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
Vertical multistage centrifugal pumps in ring-section design
Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design PUMP DESIGN Multistage centrifugal pumps in ring-section design, radially split,
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
Data sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
Data sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
Centrifugal pumps. PERFORMANCE RANGE Flow rate up to 900 l/min (54 m³/h) Head up to 76 m
CP Centrifugal pumps Clean water Civil use Agricultural use Industrial use PERFORMANCE RANGE Flow rate up to 9 l/min (5 m³/h) Head up to 76 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
Contents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.
![50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.](/thumbs/73/69367420.jpg "50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.")
Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6
HORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
Submersible Pumps - HSP Series HIWAKI
Submersible Pumps - HSP Series HIWAKI The Company We are manufacturers innovative HIWAKI PUMPS, top-quality water pumps world-wide in different versions. Our very wide range of pumps can be used in many
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
Selection Chart. SC Series 6 inch (150mm) Submersible Borehole Pumps PERFORMANCE DATA SC65 SC50 SC30 SC18 TOTAL HEAD FEET Q (LITRES PER MINUTE)
PERFORMANCE DATA Selection Chart TOTAL HEAD FEET 450 400 350 300 250 200 150 100 50 0 GALLONS PER MINUTE 0 50 100 150 200 250 300 SC18 SC30 SC50 SC65 0 200 400 600 800 1000 1200 1400 Q (LITRES PER MINUTE)
Data sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
Bristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
CENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
abcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG
abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head
2BE1 SERIES LIQUID RING VACUUM PUMP
2BE1 SERIES LIQUID RING VACUUM PUMP ZIBO ZHAOHAN PUMP WORKS We Always Supply High Qualitty Prroductt And Serrvi ice THE APPLICATION RANGE AND CHARACTERISTICS: 2BE1 series liquid ring vacuum pumps and compressors
Data sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: CME3-7 A-S-I-E-AVBE. Pump Data
Submittal Data PROJECT: REPRESENTATIVE: ENGINEER: CONTRACTOR: UNIT TAG: TYPE OF SERVICE: SUBMITTED BY: APPROVED BY: ORDER NO.: CME3-7 A-S-I-E-AVBE QUANTITY: DATE: DATE: DATE: CME are reliable, quiet and
SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS
FEATURES n Stainless steel impellers and diffusers to resist corrosion n Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures
MTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
Godwin Wet-Prime. Think Orange. Think Godwin. Great Pumps. Great People.
Godwin Wet-Prime GDP-8HX GPL-5HX GWP-25HX GPP-5HX GTP-1HX GWP8-HX Portable, gasoline-powered Wet-Prime pumps from the people who understand your pumping needs. Think Orange. Think Godwin. Great Pumps.