Cree XLamp XQ Family LEDs

Transcription

1 Cree XLamp XQ Family LEDs binning & Labeling CLD-AP130 rev 0A Table of Contents Introduction... 1 Bin and Order-Code Format... 2 Performance Groups Luminous Flux... 3 Forward Voltage... 3 Performance Groups Chromaticity... 4 Cree s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve... 7 Cree s Standard Cool White Kits Plotted on Standard Chromaticity Regions... 8 Cree s Standard Warm and Neutral White Kits Plotted on Standard Chromaticity Regions... 9 Cree s Standard Chromaticity Kits...10 Standard Order Codes and Bins XQ-B Cool White...11 XQ-B Neutral White...11 XQ-B Warm White...12 XQ-D Cool White...13 XQ-D Neutral White...14 XQ-D Warm White...15 Introduction This document describes the product nomenclature required to select and order Cree s XLamp XQ Family LEDs. XLamp XQ Family LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. All XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). LEDs are shipped on reels containing LEDs from one bin and are always labeled with the appropriate bin code. Kits contain LEDs from a number of similar bins and are fully defined by their order codes. A full explanation of the order codes for XLamp XQ Family LEDs, as well as a list of standard order codes, is provided in this document. Copyright 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at Cree, Inc Silicon Drive Durham, NC USA Tel:

2 Bin and Order-Code Format Bin codes and order codes for XQ White are configured in the following manner: Order Code Bin Code Series XQB = XQ-B XQD = XQ-D Configuration B: Internal code D: Reel size Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum Chromaticity kit SSSCCC-B-WWW-FFF-VR-AAAA Series XQB = XQ-B XQD = XQ-D Internal code Luminous flux group Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum P: 85 CRI Minimum U: 90 CRI Minimum Internal code SSSCCC-BD-HHHH-NNNNVRFGG Flux Vf bin 0: Default Internal code Color AWT = White Vf bin 0: Default Chromaticity bin Color AWT = White 2

3 Performance Groups Luminous Flux (T J = 25 C) XLamp XQ Family White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. These group codes, with a 0 appended, are used in the Bin Code Luminous flux group. Group Code Min. Luminous Flux (lm) Max. Luminous Flux (lm) H J J K K M M N N N P P P Q Q Q Q R R R R S Forward Voltage The following group codes are used in the Order Code and Bin Code Vf bin. Group Code Min. Forward Voltage (V) Max. Forward Voltagex (V) V W X Y Z

4 Performance Groups Chromaticity XLamp XQ Family White LEDs are tested for luminous flux and placed into one of the following chromaticity groups. These group codes are used in the Bin Code Chromaticity bin. Two-digit group codes are appended with a 0. Region x y Region x y Region x y Region x y A B 0C 0D R S 0T 0U A B 1C 1D R S 1T 1U A B 2C 2D R S 2T 2U C 3D R S 3T 3U A B 4C 4D

5 Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y A A2 5A3 5A B B2 5B3 5B C C2 5C3 5C D D2 5D3 5D A A2 6A3 6A B B2 6B3 6B C C2 6C3 6C D D2 6D3 6D A A2 7A3 7A B B2 7B3 7B

6 xlamp xq xt led binning & labeling Performance Groups Chromaticity (continued) Region x y Region x y Region x y Region x y C C2 7C3 7C D D2 7D3 7D A A2 8A3 8A B B2 8B3 8B C C2 8C3 8C D D2 8D3 8D

7 Cree s Standard White Chromaticity Regions Plotted on the 1931 CIE Curve Cool White 5700K 6500K 2S 2T 3S 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3R 0S 0B 0A 0C 0D 0R 0U 1A 1R 1U 2R CCx Neutral White and Warm White K 2700K D 3C 4A 4B 4D 4500K 4C 5A1 5A2 5B1 5B2 5A4 5A3 5B4 5B3 5D1 5D2 5C1 4000K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6D1 6B3 6D2 6C1 6D4 3500K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C3 8B1 8A3 8D1 8B2 8B4 8D2 8D4 8B3 8C1 8D3 8C2 8C4 8C

8 Cree s Standard Cool White Kits Plotted on Standard Chromaticity Regions 6500K K 2S 2T 3S 6500K K 2S 2T 3S 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3R 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3R 0S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R 0S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R CCx CCx 5700K 5700K 8000K 0T 6500K 1S 1B 1T 1C 1D 50 2S 2B 2A 2T 2C 2D 2U 3S 3R 8000K 0T 6500K E1 1S 1B 1T 1C 1D 2S 2B 2A 2T 2C 2D 2U 3S 3R 0S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R 0S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R CCx CCx 6500K 5700K E2 2S 2T 3S 8000K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3R 0S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R CCx 8

9 Cree s Standard Warm and Neutral White Kits Plotted on Standard Chromaticity Regions E3 3C 3D 4A 3000K E8 3500K E7 8C2 8B3 8B2 7C3 4000K 4500K E6 7C2 8C4 7B3 8C1 7B2 8B4 8B1 6C3 7C4 7C1 6C2 7B4 8D2 8D3 E5 7B1 8A3 6B3 8A2 6C4 7D3 6B2 7D2 5C3 6C1 7A3 8D4 8D1 7A2 8A4 5C2 6B4 8A1 6D3 7D4 5B3 6B1 5C4 7D1 E4 6D2 7A4 5B2 5C1 6A3 7A1 6D4 5B4 5D3 6A2 6D1 5B1 5D2 6A4 4C 5A3 5D4 6A1 4B 5A2 5D1 5A4 5A1 4D 8C3 2700K CCx K F4 4B 3C 4A 3000K F8 3500K F7 8B3 8B2 7C3 4000K 7C2 7B3 8C1 7B2 8B4 8B1 4500K 6C3 7C4 7C1 6C2 7B4 8D2 8D3 7B1 8A3 6B3 8A2 6C4 7D3 F5 6B2 7D2 5C3 6C1 7A3 8D4 8D1 7A2 8A4 5C2 6B4 8A1 6D3 7D4 5B3 6B1 5C4 7D1 6D2 7A4 5B2 5C1 6A3 7A1 6D4 5B4 5D3 6A2 6D1 5B1 5D2 6A4 4C 5A3 5D4 6A1 5A2 5D1 5A4 5A1 4D F6 8C2 8C4 8C3 3D CCx 9

10 Cree s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U,,, 3R, 3S Cool White 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T,,, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3,, 3C, 3D 5000 K C1,, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S 4750 K F4 3C, 3D, 4A, 4B 4750 K D1,, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U Neutral White 4500 K E4 4A, 4B, 4C, 4D 4500 K D2 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S 4500 K C2 3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U 4300 K C3 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 Warm White 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 10

11 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XQ LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor. Standard Order Codes and Bins (XQ-B Cool White, T J = 25 C) XLamp XQ-B Standard Kit Codes - White Chromaticity Minimum Luminous Flux 80 ma Order Codes Kit CCT Code Flux (lm) No Minimum CRI 70 CRI Minimum 80 CRI Minimum Cool White (5000 K 8300 K) K K XQBAWT L051 XQBAWT B K K XQBAWT L053 XQBAWT B K K XQBAWT L050 XQBAWT B050 E K K XQBAWT L0E1 XQBAWT B0E1 E K K XQBAWT L0E2 XQBAWT B0E2 XQBAWT H0E2 Standard Order Codes and Bins (XQ-B Neutral White, T J = 25 C) XLamp XQ-B Standard Kit Codes - White Chromaticity Minimum Luminous Flux 80 ma Order Codes Kit CCT Code Flux (lm) 70 CRI Minimum 75 CRI Typical 80 CRI Minimum Neutral White (3700 K 5000 K) E3 F4 E4 F5 E K 4750 K 4500 K 4250 K 4000 K K XQBAWT B0E3 XQBAWT L0E3 XQBAWT H0E3 J XQBAWT HXE3 K XQBAWT B0F4 XQBAWT L0F4 XQBAWT H0F4 J XQBAWT HXF4 K XQBAWT B0E4 XQBAWT L0E4 XQBAWT H0E4 J XQBAWT HXE4 K XQBAWT B0F5 XQBAWT L0F5 XQBAWT H0F5 J XQBAWT BXF5 XQBAWT HXF5 K XQBAWT B0E5 XQBAWT L0E5 XQBAWT H0E5 J XQBAWT BXE5 XQBAWT HXE5 J XQBAWT HWE5 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, ) measurements and ±2 on CRI measurements. Cree XLamp XQ Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code 11

12 Standard Order Codes and Bins (XQ-B Warm White, T J = 25 C) XLamp XQ-B Standard Kit Codes - White Chromaticity Minimum Luminous Flux 80 ma Order Codes: XQBAWT-00-(+ extension below) Kit CCT Code Flux (lm) 70 CRI Minimum 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Warm White (2700 K K) F6 E6 F7 E7 F8 E K 3500 K 3250 K 3000 K 2850 K 2700 K K B0F L0F H0F6 J BXF LXF HXF6 K B0E L0E H0E6 J BXE LXE HXE6 K B0F L0F7 J BXF LXF HXF7 J HWF7 K B0E L0E7 J BXE LXE HXE7 J HWE PWE UWE7 H PVE UVE7 K B0F L0F8 J BXF LXF HXF8 J HWF PWF UWF8 H PVF UVF8 K B0E L0E8 J BXE LXE HXE8 J HWE PWE UWE8 H PVE UVE8 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, ) measurements and ±2 on CRI measurements. Cree XLamp XQ Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code 12

13 Standard Order Codes and Bins (XQ-D Cool White, T J = 25 C) XLamp XQ-D Standard Kit Codes - White Chromaticity Minimum Luminous Flux 350 ma Order Codes Kit CCT Code Flux (lm) No Minimum CRI 70 CRI Minimum 80 CRI Minimum Cool White (5000 K 8300 K) R4 130 XQDAWT BG K R3 122 XQDAWT LF51 XQDAWT BF51 XQDAWT HF51 R2 114 XQDAWT LE51 XQDAWT BE51 XQDAWT HE51 R4 130 XQDAWT BG K R3 122 XQDAWT LF53 XQDAWT BF53 XQDAWT HF53 R2 114 XQDAWT LE53 XQDAWT BE53 XQDAWT HE53 R4 130 XQDAWT BG K R3 122 XQDAWT LF50 XQDAWT BF50 XQDAWT HF50 E1 E K 5700 K R2 114 XQDAWT LE50 XQDAWT BE50 XQDAWT HE50 R4 130 XQDAWT BGE1 R3 122 XQDAWT LFE1 XQDAWT BFE1 XQDAWT HFE1 R2 114 XQDAWT LEE1 XQDAWT BEE1 XQDAWT HEE1 Q5 107 XQDAWT HDE1 R4 130 XQDAWT BGE2 R3 122 XQDAWT LFE2 XQDAWT BFE2 XQDAWT HFE2 R2 114 XQDAWT LEE2 XQDAWT BEE2 XQDAWT HEE2 Q5 107 XQDAWT HDE2 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, ) measurements and ±2 on CRI measurements. Cree XLamp XQ Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code 13

14 Standard Order Codes and Bins (XQ-D Neutral White, T J = 25 C) XLamp XQ-D Standard Kit Codes - White Chromaticity Minimum Luminous Flux 350 ma Order Codes Kit CCT Code Flux (lm) 70 CRI Minimum 75 Typical CRI 80 CRI Minimum Neutral White (3700 K 5000 K) E3 F4 E4 F5 E K 4750 K 4500 K 4250 K 4000 K R4 130 XQDAWT BGE3 R3 122 XQDAWT BFE3 XQDAWT LFE3 XQDAWT HFE3 R2 114 XQDAWT BEE3 XQDAWT LEE3 XQDAWT HEE3 R4 130 XQDAWT BGF4 R3 122 XQDAWT BFF4 XQDAWT LFF4 XQDAWT HFF4 R2 114 XQDAWT BEF4 XQDAWT LEF4 XQDAWT HEF4 Q5 107 XQDAWT LDF4 XQDAWT HDF4 R4 130 XQDAWT BGE4 R3 122 XQDAWT BFE4 XQDAWT LFE4 XQDAWT HFE4 R2 114 XQDAWT BEE4 XQDAWT LEE4 XQDAWT HEE4 Q5 107 XQDAWT LDE4 XQDAWT HDE4 R3 122 XQDAWT BFF5 R2 114 XQDAWT BEF5 XQDAWT LEF5 XQDAWT HEF5 Q5 107 XQDAWT LDF5 XQDAWT HDF5 R3 122 XQDAWT BFE5 R2 114 XQDAWT BEE5 XQDAWT LEE5 XQDAWT HEE5 Q5 107 XQDAWT LDE5 XQDAWT HDE5 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, ) measurements and ±2 on CRI measurements. Cree XLamp XQ Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code 14

15 Standard Order Codes and Bins (XQ-D Warm White, T J = 25 C) XLamp XQ-D Standard Kit Codes - White Chromaticity Minimum Luminous Flux 350 ma Order Codes Order Codes: XQBAWT-00-(+ extension below) Kit CCT Code Flux (lm) 70 CRI Minimum 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Warm White (2700 K K) F6 E6 F7 E7 F8 E K 3500 K 3250 K 3000 K 2850 K 2700 K R BFF6 R BEF LEF HEF6 Q BDF LDF HDF6 Q HCF6 R BFE6 R BEE LEE HEE6 Q BDE LDE HDE6 Q HCE6 R BFF7 R BEF LEF HEF7 Q BDF LDF HDF7 Q LCF HCF7 R BFE7 R BEE LEE HEE7 Q BDE LDE HDE7 Q LCE HCE7 Q PBE7 Q PAE UAE7 P P9E U9E7 R BEF8 Q BDF LDF HDF8 Q BCF LCF HCF8 Q HBF8 Q P P9F8 R BEE8 Q BDE LDE HDE8 Q BCE LCE HCE8 Q HBE8 Q PAE UAE8 P P9E U9E8 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, ) measurements and ±2 on CRI measurements. Cree XLamp XQ Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code 15

16 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: XQBAWT HXE5 XQDAWT HBE7 XQDAWT HBE8 XQDAWT HDE1 XQDAWT HDE2 XQDAWT HDE3 XQDAWT HDE5