Fiberglass Entry Door Specification Guide

Transcription

1 Your Life, Your Door Fiberglass Entry Door Specification Guide

2

3 Plastpro s 200,000 square-foot, fully automated manufacturing facility in shtabula, Ohio is the most advanced in the door industry. Plastpro s innovative manufacturing methods include our fully integrated, computer-controlled system that enables greater product consistency and enhanced employee safety. s one of the most highly skilled and experienced manufacturing workforces in the nation with expertise in the molding and assembly technologies, we have up to 400 percent greater productivity than traditional manufacturing operations. By carefully controlling every phase of manufacturing, Plastpro can ensure the integrity and quality of every product. PTENTED HYDROSHIELD TECHNOLOGY Our exclusive water-resistant seal protects our doors against water infiltration on all six sides to prevent warping, delamination, corrosion, rotting, and the build up of mold and mildew. This Hydroshield seal consists of: FIBERGLSS REINFORCED DOOR SKINS Our high-impact compression molded skins will not splinter, dent, warp, rot or rust. Surfaces are easy to stain, paint and easy to clean. FULL-LENGTH COMPOSITE STILES Our full-length composite stiles provide complete waterproofing for the door s insulation and have twice the screw-holding power of traditional wood-edged doors. Our doors will never splinter like wood or delaminate like steel. COMPOSITE TOP & BOTTOM RILS High strength composite top and bottom rails prevent moisture from seeping into the door. Bottom rails accommodate a range of door sweeps. BTHP SNP-ON DOORLITE FRMES Our exclusive BTHP Snap-on Frames employ a series of specially designed clips that lock decorative glass firmly in place. Our BTHP Frames have no unsightly plugs or screws, and create a cleaner, more natural appearance in any entryway. EXTENDED LOCKBLOCK Our extended lockblock allows a range of door locks and hardware to be installed into our doors. ENVIRONMENTLLY SOUND POLYURETHNE FOM CORE While some other fiberglass door manufacturers still use HCFCfree foam, we are proud to offer a door that is completely CFC-free, in compliance with the United States environmental standards to prevent destruction to the Earth s ozone layer. The advanced polyurethane core enhances the door s soundproofing capabilities and provides insulation six times greater than wood doors. 6/8 & 7/0 DOOR 8/0 DOOR Wood Reinforcement FLUSH GLZED DOOR Composite Stiles Composite Stiles Fiberglass Reinforced Skins Polyurethane Core Steel Beam Composite Stiles Double-paned Glass Fiberglass Reinforced Skin Exchangeable Glass Stop Engineered Composite Bottom Rail 100% CFC Free Polyurethane Core Engineered Composite Bottom Rail TRIMMBLE DOOR FIRE RTED DOOR Extended Composite Stiles (Trimmable) Fiberglass Reinforced Skins PVC Stile - Fiberglass Reinforced Skins Polyurethane Core Fire Retardant Foam Core Extended Bottom Rail (Trimmable) Hardwood Top & Bottom Rail

4 PTENTED HYDROSHIELD TECHNOLOGY Our exclusive Hydroshield Technology features fiberglass reinforced door skins, full-length composite stiles, and composite top & bottom rails to prevent water infiltration on all six sides. FULL LENGTH COMPOSITE TOP ND BOTTOM RILS: dditional non-porous protection keeps water from seeping into the door and helps prevent the build up of mold or mildew. FIBERGLSS REINFORCED SKIN: Fiberglass is unmarred by the wear and tear of everyday use and is unaffected by moisture and humidity. Our doors will not rot, splinter or warp like wood, and won t dent or delaminate like steel. FULL LENGTH COMPOSITE STILES: ll Plastpro fiberglass entry doors feature fully composite stiles to prevent water infiltration into the door s insulation and to ensure warp free, rot free and rust free doors. TRIPLE PNE DECORTIVE GLSS: Our decorative doorlites provide excellent thermal protection while adding beauty and sophistication to your entryway. BTHP DOORLITE FRMES: Our exclusive frames create a completely unblemished surface around the decorative doorlite for an attractive appearance without unsightly screws or mismatched plugs. WROUGHT IRON DOORLITE FRMES: Specially engineered to complement the range of cutouts in the Rustic Series, each frame is beautifully hand made and has a durable powder coat finish. vailable for all Wrought Iron doorlite collections. RCHITECTURLLY CORRECT PROPORTIONS: Plastpro doors are designed with beautifully detailed panels that are identical to traditional wood door construction to create crisper shadow lines and heightened curb appeal. INSULTED CORE: Our environmentally friendly insulation is 100% CFC-free and provides a high R-value for maximum thermal protection.

5 PRODUCT SPECIFICTIONS & PRICE CONTENTS LISTS INTRODUCTION COMPNY OVERVIEW - GENERL PRODUCT FETURES - TESTING RESULTS - DOOR SPECIFICTIONS PRODUCT SPECS RUSTIC SERIES DOOR SPECS p. DR S-1 MHOGNY SERIES DOOR & SIDELITE SPECS p. DRM S-1 WOODGRIN SERIES DOOR SPECS p. DRG S-1 SIDELITE SPECS p. SLG S-1 FIR GRIN SERIES DOOR & SIDELITE SPECS p. DRF S-1 CHERRY SERIES DOOR SPECS p. DRC S-1 TRUE WHITE OK SERIES DOOR SPECS p. DRW S-1 SIDELITE SPECS p. SLW S-1 SMOOTH SKIN SERIES DOOR SPECS p. DRS S-1 SIDELITE SPECS p. SLS S-1 ONELITE SERIES DOOR & SIDELITE SPECS p. ONE S-1 TRIMMBLE SERIES DOOR SPECS p. DRT S-1 WRRNTIES

6 INTRODUCTION Dear Plastpro Customer, Plastpro is moving to become a leader in the building industry with both high quality and maintenance free home products. This kit has been assembled to help introduce our company and our excellent product line. s part of the Formosa Plastics family of companies, Plastpro can boast total vertical integration as we are able to source the most highly advanced and best quality materials in the world. Since 1954, the world-renowned Formosa Plastics Group has offered customers top quality products at the greatest value. By being able to control every aspect of the manufacturing production process from raw materials to the finished product, Plastpro can ensure products with unsurpassed quality backed by extensive materials research. Plastpro is proud to offer an expanding line of fiberglass entry doors in a wide selection of skins, styles, and sizes. Our fiberglass skins combine the rich grain of wood with the strength of steel, without rotting, rusting or insect damage common with wood or steel doors. We also offer a complete line of PF Frames, our durable rot-free line of composite doorframes and Plastpro Planking, an easy to install and maintenance free product perfect for any home. Since our founding, Plastpro has based its business on the concept of providing the end-user with a durable and cost-effective product. We offer products that ensure your customer has a home that they - and we - can think of with pride. Sincerely, Walter Wang Chairman 2 Introduction Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

7 COMPNY OVERVIEW Established in 1994 in Livingston, NJ, Plastpro introduced our advanced Hydroshield Technology, a patented process that protects doors on all six sides through the use of composite materials. In 2005, Plastpro opened a 250,000 square-foot plant in shtabula, Ohio, making it the first and only fiberglass door manufacturer with a fully automated facility. The facility affords not only greater quality control and product consistency but our operations have up to 400% greater productivity than traditional door manufacturing operations. Our growing line of complimentary products are specially formulated for use with fiberglass entry doors, including door accessories and our unique doorlite options that include our exclusive BTHP Snap-On Doorlite Frames and authentic Wrought Iron Doorlites and Frames. Plastpro continues its conscious effort to produce the highest quality products available on the market today. Plastpro boasts complete vertical integration through the Formosa Plastics Family, which ensures: Consistent product quality Greater productivity than traditional manufacturing operations Diversified product offerings made with composite materials Enhanced employee safety Plastpro's product line includes: Fiberglass Entry Doors - Rustic, Mahogany, Woodgrain, Fir Grain, True White Oak & Smooth Skin PF Frames - n expanding line of fully composite doorframes and moldings Plastpro Planking - Prefinished Planking comes in White or Imperial Oak Exclusive Doorlites - BTHP Frames and uthentic Wrought Iron Doorlites & Frames Door ccessories - Expanding line of accessories made exclusively for fiberglass entry doors Professional ffiliations Plastpro is proud to be an Energy Star Partner Built Green Member Member of NRL Member of NHB Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is Company Overview 3

8 GENERL PRODUCT FETURES Deep Profile Fiberglass Skins Our deep profile, compression molded fiberglass door skins prominently create stronger dimensions, enriching the door's appearance. Plastpro fiberglass door skins provide the authentic look of wood graining with the strength of steel and the superior performance of fiberglass. Door Skins Through years of manufacturing experience and manufacturing expertise, Plastpro is proud to offer the following graining options: RUSTIC The Rustic Collection provides classic charm while bringing a contemporary appeal to any home. The doors feature a deep alder grain and panel profiles with distinctly European architectural styles. MHOGNY The Mahogany collection reflects a tighter grain and a more porous texture than our oak grain doors, and has architecturally correct stile and rail proportions. WOODGRIN Our Woodgrain Collection features a beautiful oak pattern that can be stained or painted in the shade of your choice. FIR GRIN Fir Grain doors feature the fine vertical graining characteristic of the Douglas Fir which emphasizes the architecturally correct proportions of our fiberglass entry doors. TRUE WHITE OK The True White Oak Collection combines the best features of our smooth skin and oak grain doors - a traditional oak grain pattern and pre-pigmented white skin that resists scratches and yellowing for years to come. SMOOTH SKIN Our Smooth Skin Collection features a pre-pigmented white skin that resists the appearance of scratches. Environmentally Sound Polyurethane Foam Core Though some other fiberglass door manufacturers still use HCFC-free foam, we are proud to offer a door that is completely CFC-free, in compliance with the United States U.S. Government s standards to prevent destruction of the Earth's Ozone layer. Plastpro Fiberglass Entry Doors feature a polyurethane foam core with one of the highest densities in the industry, enhancing the doors' soundproofing capabilities and provides insulation up to six times greater than wood doors. 4 General Product Features Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

9 GENERL PRODUCT FETURES Full Length Composite Stiles Plastpro Fiberglass Entry Doors offer full-length composite stiles which provide complete waterproofing for the door's insulation, thanks to our exclusive Hydroshield Technology. Using the superior performance of composite materials, these stiles will not splinter like wood or dent like steel. Our innovative design also allows trimming of our fiberglass entry doors by 1/8" on the hinge side. High Strength Composite Bottom Rail The Plastpro Fiberglass Entry Door's high strength composite top and bottom rails prevent moisture from seeping into the door. The unique bottom rail allows our doors to accommodate a wide range of snap on door sweeps and allows trimming of the door bottom by up to 1/4". Doorlites & Doorlite Frames Plastpro's exclusive decorative doorlites are accented with several different varieties of glass components and have three caming options available. Fused between two panes of glass, our decorative doorlites come in a wide selection of styles to choose from. Our BTHP Snap-On Doorlite frames employ a series of specially designed clips that lock decorative glass firmly - without screw holes or ugly, mismatched plugs. Specially designed to fit the cutouts in our Rustic doors, our maintenance-free Wrought Iron Doorlites and Doorlite Frames resist rust and corrosion. Each frame is individually hand made and has a durable powder coat finish. Warranties Plastpro is proud to offer some of the best warranties in the industry. Plastpro Trimmable, Rustic, Mahogany, Woodgrain, Fir Grain doors and PF Frames carry a Limited Lifetime Warranty; Smooth Skin, True White Oak doors and Flush Glazed Onelite doors carry a Limited 25-Year Warranty. Plastpro Decorative Doorlites carry a 10-Year Warranty and Wrought Iron Doorlites and Door Frames carry a 2-Year Warranty. Pre-finished doors carry a 5-Year warranty on factory stained Finish. Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is 5 General Product Features

10 TESTING RESULTS STM D1761 STM F1450 Sec.7.3 STM D-1666 STM E 283 STM E 331 STM E 547 STM E 330 STM E1886 / E1996 TS 201 TS 202 TS 203 NFRC SCREW HOLDING CPCITY TEST DOOR STTIC LOD TEST MCHINING TEST IR INFILTRTION WTER RESISTNCE WTER RESISTNCE UNIFORM STRUCTURL LOD IMPCTED / CYCLE TEST IMPCTED TEST IR/ WTER/ STRUCTURL TEST CYCLE TEST THERML TEST STC RTING RTING = 29 FIRE RTED NFP252, UL10C 20 MINUTES FIRE-RTED DOOR WRNOCK - HERSEY CERTIFIED The PLSTPRO DOOR met requirements for sawing, planing, routing, boring, drilling and chiseling. For more specific testing results, please see our website at or contact our Customer Service Department at *Testing results by independent Laboratories 6 Testing Results Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

11 DOOR SPECIFICTIONS Plastpro Standard Door Sizes Nominal Size ctual Size 2'6" x 6'8" 29-3/4" x 79-1/4" 2'8" x 6'8" 31-3/4" x 79-1/4" 2'10" x 6'8" 33-3/4" x 79-1/4" 3'0" x 6'8" 35-3/4" x 79-1/4" 3'6" x 6'8" 41-3/4" x 79-1/4" 2'6" x 7'0" 29-3/4" x 83-1/4" 2'8" x 7'0" 31-3/4" x 83-1/4" 2'10" x 7'0" 33-3/4" x 83-1/4" 3'0" x 7'0" 35-3/4" x 83-1/4" 2'6" x 8'0" 29-3/4" x 95-1/4" 2'8" x 8'0" 31-3/4" x 95-1/4" 2'10" x 8'0" 33-3/4" x 95-1/4" 3'0" x 8'0" 35-3/4" x 95-1/4" 3'6" x 8'0" 41-3/4" x 95-1/4" *Door thickness: 1-3/4" Plastpro Standard Sidelite Sizes Nominal Size ctual Size 1'0" x 6'8" 11-7/8" x 79-1/4" 1'2" x 6'8" 13-7/8" x 79-1/4" 1'0" x 7'0" 11-7/8" x 83-1/4" 1'2" x 7'0" 13-7/8" x 83-1/4" 1'0" x 8'0" 11-7/8" x 95-1/4" 1'2" x 8'0" 13-7/8" x 95-1/4 *Sidelite thickness: 1-3/4" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is Door Specifications 7

12

13 6/8 RUSTIC TRUE PLNK DOOR SQURE TOP MODEL DRTP (2-6, 3-0, 3-6 x 6-8 ) , " ": 3/ ": 3/ " 4.733" 4.733" 4.733" 4.733" 4.021" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-1

14 6/8 RUSTIC TRUE PLNK DOOR RCH TOP MODEL DRPC (2-6, 3-0, 3-6 x 6-8 ) , " ": 3/ ": 3/6 R18.903" R24.903" : 3/0 R30.603" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.021" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" DR S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

15 6/8 RUSTIC TRUE PLNK DOOR RDIUS TOP MODEL DRPR (2-6, 3-0, 3-6 x 6-8 ) , " ": 3/ ": 3/6 R14.875" R17.875": 3/0 R20.875": 3/ " 4.733" 4.733" 4.733" 4.733" 4.021" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" : 3/6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-3

16 6/8 RUSTIC ONE PNEL DOOR SQURE PLNK / SQURE TOP MODEL DR1P (3-0 x 6-8 ) " " " 5.000" 0.555" 4.155" 8.125" " DR S-4 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

17 6/8 RUSTIC TWO PNEL DOOR RCH PLNK / SQURE TOP MODEL DR2 (3-0 x 6-8 ) " " R23.945" 8.125" " " " CUT-OUTS & GLSS INSERT VILBLE HLF RCH LITE HLF RCH LITE 25-1/8 x /4 x 38 (cut-out) HLF LITE 25-1/8 x 39 (cut-out) 24-1/8 x 38 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-5

18 6/8 RUSTIC TWO PNEL DOOR RCH PLNK / RCH TOP MODEL DR2C (3-0 x 6-8 ) " " 8.125" " 39" R23.945" R28.945" " CUT-OUTS & GLSS INSERT VILBLE HLF RCH LITE HLF RCH LITE 25-1/8 x 39 (cut-out) 24-1/4 x 38 5 DR S-6 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

19 6/8 RUSTIC TWO PNEL DOOR SQURE PNEL / SQURE TOP MODEL DR2B (2-10, 3-0 x 6-8 ) " " " " 6.000" " " 8.125" " " 6.000" 5.000" 5.000" 8.125" 5.313" 4.313" CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 25-1/8 x 39 (cut-out) 24-1/8 x 38 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-7

20 6/8 RUSTIC TWO PNEL DOOR RCH PNEL / SQURE TOP MODEL DR2D (2-10, 3-0, 3-6 x 6-8 ) 2-10, " " " " 8.125" " " 6.000" 5.000" R23.945" " " 6.000" 4.986" R25.56" 8.125" 4.313" 5.687" CUT-OUTS & GLSS INSERT VILBLE HLF RCH LITE * 3-0 & 2-10 Doors Only HLF RCH LITE 25-1/8 x /4 x 38 (cut-out) HLF LITE 25-1/8 x 39 (cut-out) 24-1/8 x 38 5 DR S-8 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

21 6/8 RUSTIC TWO PNEL DOOR RCH PNEL / RCH TOP MODEL DR2E (2-10, 3-0, 3-6 x 6-8 ) 2-10, ": 2/ ": 3/ " " " 8.125" " " 6.000" 5.000" R28.945" R23.945" R25.565" 8.125" " " 6.000" 5.000" R30.603" 5.313": 2/ ": 3/ " CUT-OUTS & GLSS INSERT VILBLE HLF RCH LITE * 3-0 & 2-10 Doors Only HLF RCH LITE 25-1/8 x 39 (cut-out) 24-1/4 x 38 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-9

22 7/0 RUSTIC TRUE PLNK DOOR SQURE TOP MODEL DRTP70 (2-6, 3-0, 3-6 x 7-0 ) , " ": 3/ ": 3/ " " 4.021" 4.733" 4.733" 4.733" 4.733" 4.021" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" DR S-10 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

23 7/0 RUSTIC TRUE PLNK DOOR RCH TOP MODEL DRPC70 (2-6, 3-0, 3-6 x 7-0 ) , " ": 3/ ": 3/6 R18.903" R24.903" : 3/0 R30.603" : 3/ " " 4.021" 4.733" 4.733" 4.733" 4.733" 4.021" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-11

24 7/0 RUSTIC TRUE PLNK DOOR RDIUS TOP MODEL DRPR70 (2-6, 3-0, 3-6 x 7-0 ) , " ": 3/ ": 3/6 R14.875" R17.875": 3/0 R20.875": 3/ " " 4.021" 4.733" 4.733" 4.733" 4.733" 4.021" : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" : 3/6 DR S-12 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

25 8/0 RUSTIC TRUE PLNK DOOR SQURE TOP MODEL DRTP80 (2-6, 3-0, 3-6 x 8-0 ) , " ": 3/ ": 3/ " " 4.021" 4.733" 4.733" 4.733" 4.733" 4.021" 4.377" 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/0 : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-13

26 8/0 RUSTIC TRUE PLNK DOOR RCH TOP MODEL DRPC80 (2-6, 3-0, 3-6 x 8-0 ) , " ": 3/ ": 3/6 R18.903" R24.903" : 3/0 R30.603" : 3/ " " 4.021" 4.733" 4.733" 4.733" 4.733" 4.021" 4.377" 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/0 : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" DR S-14 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

27 8/0 RUSTIC TRUE PLNK DOOR RDIUS TOP MODEL DRPR80 (2-6, 3-0, 3-6 x 8-0 ) , " ": 3/ ": 3/6 R14.875" R17.875": 3/0 R20.875": 3/ " " 4.021" 4.733" 4.733" 4.733" 4.733" 4.021" 4.377" 4.733" 4.733" 4.733" 4.733" 4.733" 4.377" : 3/0 : 3/ " 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" 4.733" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-15

28 8/0 RUSTIC ONE PNEL DOOR SQURE PLNK / SQURE TOP MODEL DR1P80 (3-0, 3-6 x 8-0 ) " " " " " " " " 5.000" 5.000" 0.555" 4.155" 0.555" 4.955" 4.687" 5.687" DR S-16 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

29 8/0 RUSTIC ONE PNEL DOOR RCH PLNK / SQURE TOP MODEL DR180 (3-0, 3-6 x 8-0 ) " " " " " R19.900" " 5.000" " 0.555" R25.56" 4.955" " 5.000" 4.687" 5.687" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-17

30 8/0 RUSTIC ONE PNEL DOOR RCH PLNK / RCH TOP MODEL DR1C80 (3-0, 3-6 x 8-0 ) " " " " 5.000" R19.900" R24.903" R25.56" " 5.000" R30.603" " 0.555" 4.955" 4.687" 5.687" DR S-18 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

31 8/0 RUSTIC TWO PNEL DOOR SQURE PLNK / SQURE TOP MODEL DR2P80 (3-0, 3-6 x 8-0 ) " " " " " " 7.000" 7.000" " " " " 5.000" 5.000" 0.555" 4.155" 0.555" 4.955" 4.687" 5.687" CUT-OUTS & GLSS INSERT VILBLE 3/4 Lite 3/4 LITE 26-1/2 x 51 (cut-out) * /2 x 50 3/4 LITE 30-1/2 x 51-1/4 (cut-out) * /8 x 50-1/4 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-19

32 8/0 RUSTIC TWO PNEL DOOR RCH PLNK / SQURE TOP MODEL DR280 (3-0, 3-6 x 8-0 ) " " " " R19.900" " 7.000" " " R25.56" " 7.000" " " 5.000" 0.555" 4.155" 0.555" 4.955" 4.687" 5.688" CUT-OUTS & GLSS INSERT VILBLE 3/4 RCH LITE 3/4 RCH LITE 26-3/8 x 51-1/4 (cut-out) * /8 x 50-1/4 3/4 RCH LITE 30-3/8 x 51-1/4 (cut-out) * /8 x 50-1/4 5 DR S-20 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

33 8/0 RUSTIC TWO PNEL DOOR RCH PLNK / RCH TOP MODEL DR2C80 (3-0, 3-6 x 8-0 ) " " " " R19.900" " 7.000" " " R24.903" " 7.000" " " 5.000" R25.560" R30.603" 0.555" 4.155" 0.555" 4.955" 4.687" 5.688" CUT-OUTS & GLSS INSERT VILBLE 3/4 RCH LITE 3/4 RCH LITE 26-3/8 x 51-1/4 (cut-out) * /8 x 50-1/4 3/4 RCH LITE 30-3/8 x 51-1/4 (cut-out) * /8 x 50-1/4 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-21

34 8/0 RUSTIC TWO PNEL RDIUS RDIUS PNEL / SQURE TOP MODEL DR2R80 (3-0 x 8-0 ) " " R12.875" " 7.250" " " 5.000" 5.000" DR S-22 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

35 8/0 RUSTIC TWO PNEL RDIUS RDIUS PNEL / RDIUS TOP MODEL DR2F80 (3-0 x 8-0 ) " " R12.875" " 7.250" " " 5.000" 5.000" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-23

36 8/0 RUSTIC FOUR PNEL RDIUS RDIUS PNEL / SQURE TOP MODEL DR4R80 (3-0, 3-6 x 8-0 ) " " " " " " R12.875" 7.250" 3.750" " " 5.000" " R15.188" 7.250" " 3.750" " " 5.000" 5.000" 5.688" DR S-24 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

37 8/0 RUSTIC FOUR PNEL RDIUS RDIUS PNEL / RDIUS TOP MODEL DR4C80 (3-0, 3-6 x 8-0 ) " " " " " 7.250" " " 5.000" R17.875" R15.187" R20.875" " 7.250" " " " 3.750" " 3.750" 5.000" 5.688" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DR S-25

38

39 6/8 RUSTIC TWO PNEL SIDELITE MODEL SL2B (1-0, 1-2 x 6-8 ) " " " 8.000" " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SL S-1

40 8/0 RUSTIC SIDELITE MODEL SLM6080 (1-0, 1-2 x 8-0 ) " 8.000" " " " 8.000" " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 9 x 81 (cut-out) 8 x 80 5 SL S-2 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

41 6/8 MHOGNY 3/4 OVL DELUXE DOOR MODEL DRM3D (3-0 x 6-8 ) Matching Sidelites: SLM3D, SLM " " 9.654" " " " 5.250" " " 5.500" " " 9.250" 5.250" 6.000" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL 3/4 OVL 9-21/32 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRM S-1

42 6/8 MHOGNY EYEBROW DOOR MODEL DRM4E (3-0 x 6-8 ) Matching Sidelites: SLM3D, SLM " " 4.500" 3.750" " " 6.000" " 4.672" CUT-OUTS & GLSS INSERT VILBLE TWIN LITE EYEBROW TWIN LITE EYEBROW 4-1/2 DRM S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

43 6/8 MHOGNY SIX PNEL DOOR MODEL DRM40 (3-0,2-8 x 6-8 ) Matching Sidelites: SLM3D, SLM60 2-8, 2-10, ": 2/ ": 2/ ": 3/ " " " 4.500" " 3.125" " " 5.250" " 5.250" " " 9.000" 9.000" 4.625" : 2/ " : 2/ ": 3/ CUT-OUTS & GLSS INSERT VILBLE HLF ROUND LITE HLF LITE FULL LITE HLF ROUND LITE 4 HLF LITE 23 x 37 (cut-out) 22 x 36 2/6 21 x 37 (cut-out) 20 x 36 5 FULL LITE 23 x 65 (cut-out) 22 x 64 2/6 21 x 65 (cut-out) 20 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRM S-3

44 6/8 MHOGNY TRUE FOUR PNEL DOOR MODEL DRM41-36 (3-6 x 6-8 ) Matching Sidelites: SLM3D, SLM " " " 7.250" " 5.000" " 5.688" DRM S-4 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

45 6/8 MHOGNY SIX PNEL DOOR MODEL DRM60 (3-0 x 6-8 ) Matching Sidelites: SLM3D, SLM " " 5.000" 3.750" " " 3.250" 6.250" 9.250" " 4.688" CUT-OUTS & GLSS INSERT VILBLE HLF LITE 26 x 35-1/2 (cut-out) 25 x 34-1/2 5 TOP LITE 26-1/2 x 9-1/4 (cut-out) 25-1/2 x 8-1/4 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRM S-5

46 8/0 MHOGNY SIX PNEL DOOR MODEL DRM (3-6 x 8-0 ) " " " 7.250" " " 5.500" " 5.000" " 3.750" 5.688" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 30-3/8 x 51-1/4 (cut-out) 29-3/8 x 50-1/4 DRM S-6 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

47 6/8 MHOGNY 3/4 OVL DELUXE SIDELITE MODEL SLM3D (1-0, 1-2 x 6-8 ) Matching Doors: DRM3D, DRM4E, DRM41-36, DRM " " 8.000" " " " 8.000" " " " 1.875" 2.875" CUT-OUTS & GLSS INSERT VILBLE FULL LITE 3/4 OVL LITE FULL LITE 8 x 65 (cut-out) 7 x /4 OVL LITE 9-15/32 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLM S-1

48 6/8 MHOGNY SIX PNEL SIDELITE MODEL SLM60 (1-0, 1-2 x 6-8 ) Matching Doors: DRM4E, DRM41-36, DRM " " 9.250" " 9.250" " " " CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 9 x 37 (cut-out) 8 x 36 5 HLF LITE 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 SLM S-2 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

49 8/0 MHOGNY SIX PNEL SIDELITE MODEL SLM6080 (1-0, 1-2 x 8-0 ) Matching Doors: DRM " 8.000" " " " 8.000" " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE FULL LITE 9 x 81 (cut-out) 8 x 80 HLF LITE 9 x 49 (cut-out) 8 x 48 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLM S-3

50

51 6/8 WOODGRIN FLUSH DOOR MODEL DRG00 (2-6, 2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLG00 2-6, 2-8, ": 2/ ": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE FULL OVL LITE FULL LITE FULL OVL LITE 8 FULL LITE 23 x 65 (cut-out) *2-8, 2-10, 22 x FULL LITE 21 x 65 (cut-out) * x 64 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-1

52 6/8 WOODGRIN 3/4 HERITGE DOOR MODEL DRG20 (3-0 x 6-8 ) Matching Sidelites: SLG3E, SLG " " " 3.500" " 5.000" 4.875" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 LITE 3/4 OVL LITE 9-7/16 3/4 LITE 26 x 49 (cut-out) 25 x 48 5 DRG S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

53 6/8 WOODGRIN 3/4 TWO PNEL DOOR MODEL DRG29 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelites: SLG3E, SLG60 2-8, ": 2/ ": 2/ " " " " " 4.000" 4.000" " " 5.500" 5.500" 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 23 x 49 (cut-out) 22 x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-3

54 6/8 WOODGRIN 3/4 OVL ELITE DOOR MODEL DRG3E (3-0 x 6-8 ) Matching Sidelites: SLG3E, SLG " " " 3.500" " " 9.504" 5.000" " 3.500" 4.875" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 LITE 3/4 OVL LITE 9-7/16 3/4 LITE 26 x 49 (cut-out) 25 x 48 5 DRG S-4 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

55 6/8 WOODGRIN 3/4 OVL PREMIUM DOOR MODEL DRG3P (3-0 x 6-8 ) Matching Sidelite: SLG3P " " " " " " 4.438" 8.691" " 2.750" 4.750" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 OVL LITE 8-11/16 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-5

56 6/8 WOODGRIN THREE PNEL DOOR MODEL DRG31 (3-0 x 6-8 ) Matching Sidelite: SLG " 3.250" 3.250" 7.688" " 7.750" " 4.500" R24.323" " 6.625" " CUT-OUTS & GLSS INSERT VILBLE HLF LITE 3/4 LITE HLF LITE 23 x 37 (cut-out) 22 x 36 3/4 LITE 23 x 49 (cut-out) 22 x /2 *glass thickness: 3/4 DRG S-6 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

57 6/8 WOODGRIN FOUR PNEL BLNK TOP DOOR MODEL DRG40 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLG60 2-8, ": 2/ ": 2/ " " " 4.500" " 4.500" " 5.250" " " 5.250" " " 9.000" 9.000" 4.625" : 2/ " : 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF ROUND LITE HLF LITE FULL LITE HLF ROUND LITE 4 HLF LITE 23 x 37 (cut-out) 22 x 36 5 FULL LITE 23 x 65 (cut-out) 22 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-7

58 6/8 WOODGRIN TRUE FOUR PNEL DOOR MODEL DRG41 (2-8, 2-10, 3-0, 3-6 x 6-8 ) Matching Sidelite: SLG60 2-8, 2-10, ": 2/ ": 2/ " " " 4.500" " " 6.250" 5.000" " 5.000" 7.250" " 9.000" 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE TWIN LITE HLF LITE * 2-8, 2-10, 3-0 Doors Only TWIN LITE 9 x 37 (cut-out) 8 x 36 HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRG S-8 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

59 6/8 WOODGRIN 3/4 FOUR PNEL DOOR MODEL DRG49 (2-8, 3-0 x 6-8 ) Matching Sidelites: SLG49, SLG " " " " 8.063" 8.063" " " 4.000" 4.000" " " 4.688" 4.688" 4.625" 6.625" CUT-OUTS & GLSS INSERT VILBLE 3/4 TWIN LITE 3/4 LITE 3/4 TWIN LITE 9 x 49 (cut-out) 8 x 48 3/4 LITE 23 x 49 (cut-out) 22 x Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-9

60 6/8 WOODGRIN SIX PNEL DOOR MODEL DRG60 (2-6, 2-8, 3-0 x 6-8 ) Matching Sidelite: SLG60 2-6, ": 2/ ": 2/ " " " 5.000" 3.250" " " 3.250" 9.250" 6.313" 5.000" 3.750" " " 3.250" 9.250" 6.250" 8.500" " 4.750": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE TOP LITE HLF LITE TOP LITE 26-1/2 x 9-1/4 (cut-out) * /2 x 8-1/4 5 HLF LITE 21 x 37 (cut-out) *2-6 & x 36 5 HLF LITE 26 x 35-1/2 (cut-out) * x 34-1/2 5-1/4 DRG S-10 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

61 6/8 WOODGRIN CRFTSMN DOOR MODEL DRG6C (3-0 x 6-8 ) Matching Sidelite: SLG " " 8.313" " 5.000" " 5.938" 4.938" 7.500" CUT-OUTS & GLSS INSERT VILBLE TOP LITE TOP LITE 26 x 16 (cut-out) 25 x 15 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-11

62 6/8 WOODGRIN TRUE SIX PNEL MODEL DRG63 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLG60 2-8, ": 2/ ": 2/ ": 2/ ": 2/10 CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRG S-12 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

63 6/8 WOODGRIN EIGHT PNEL DOOR MODEL DRG80 (3-0 x 6-8 ) Matching Sidelite: SLG " " 2.000" 7.750" " 8.500" " 2.000" " 2.000" " 2.000" 5.813" 5.000" 2.000" 5.000" " 5.500" 5.000" CUT-OUTS & GLSS INSERT VILBLE CENTER RCH LITE CENTER RCH LITE 10-3/4 x 42 (cut-out) 9-3/4 x /16 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-13

64 6/8 WOODGRIN NINE PNEL DOOR MODEL DRG90 (2-8, 3-0 x 6-8 ) Matching Sidelite: SLG " " 2.000" 2.000" 5.000" 2.000" 2.000" " " 2.000" 2.000" " " 2.000" 2.000" 8.000" 5.000" 8.000" 5.188" 8.500" 5.188" 5.188" 8.500" 5.188" 4.437" 6.437" CUT-OUTS & GLSS INSERT VILBLE CENTER LITE CENTER LITE 8-1/2 x 19-1/2 (cut-out) 7-1/2 x 18-1/2 15 DRG S-14 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

65 7/0 WOODGRIN FLUSH DOOR MODEL DRG0070 (2-6, 2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLG , 2-8, ": 2/ ": 2/ ": 2/ " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 21 x 65 (cut-out) * x 64 FULL LITE 23 x 65 (cut-out) *2-8, 2-10 & 22 x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-15

66 7/0 WOODGRIN FOUR PNEL DOOR MODEL DRG4170 (2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLG , ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" " " " 6.250" " " " 6.250" 5.000" 9.000" 9.000" " 9.000" 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE TWIN LITE HLF LITE TWIN LITE 9 x 37 (cut-out) 8 x 36 HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRG S-16 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

67 7/0 WOODGRIN SIX PNEL UTILITY DOOR MODEL DRG6170 (2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLG , ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" " " " 6.250" " 6.250" " " 3.250" 3.250" 7.000" 5.000" 7.000" 9.000" " 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE FULL LITE HLF LITE 23 x 37 (cut-out) 22 x 36 FULL LITE 23 x 65 (cut-out) 22 x 64 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-17

68 7/0 WOODGRIN THREE PNEL DOOR MODEL DRG3170 (3-0 x 7-0 ) 3-0 CUT-OUTS & GLSS INSERT VILBLE HLF LITE 3/4 LITE Half Lite 23 x 37 (cut-out) 22 x 36 3/4 Lite 23 x 49 (cut-out) 22 x 48 6 *glass thickness: 3/4 DRG S-18 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

69 8/0 WOODGRIN FLUSH DOOR MODEL DRG0080 (2-6, 2-8, 2-10, 3-0 x 8-0 ) Matching Sidelite: SLG , 2-8, ": 2/ ": 2/ ": 2/ " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 21 x 81 (cut-out) * x 80 FULL LITE 23 x 81 (cut-out) *2-8, 2-10 & 22 x Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-19

70 8/0 WOODGRIN THREE PNEL DOOR MODEL DRG3080 (2-8, 3-0, 3-6 x 8-0 ) Matching Sidelite: SLG , " 23.00" 35.75": 3/ ": 3/ " 95.25" " 4.23" 5.000" 9.75" 95.25" " 4.230" 5.000" 9.75" 9.875" 9.25" 12.77" 9.875" 9.25" 12.77" 3.25" 4.375" 3.25" 6.375": 3/ ": 3/6 CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 LITE FULL LITE 3/4 OVL LITE 14-2/5 x 54-2/5 (cut-out) 13 x /4 LITE 23 x 65 (cut-out) 22 x 64 FULL LITE 23 x 81 (cut-out) 22 x 80 5 DRG S-20 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

71 8/0 WOODGRIN TRUE FOUR PNEL DOOR MODEL DRG4180 (2-8, 2-10, 3-0 x 8-0 ) Matching Sidelite: SLG , ": 2/ ": 2/ " " " 4.500" 6.000" 4.500" " " " " " " 6.000" 9.000" 9.000" 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE 3/4 TWIN LITE 3/4 LITE FULL LITE 3/4 TWIN LITE 9 x 49 (cut-out) 8 x 48 3/4 LITE 23 x 49 (cut-out) 22 x 48 FULL LITE 23 x 81 (cut-out) 22 x 80 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-21

72 8/0 WOODGRIN SIX PNEL DOOR MODEL DRG6080 (2-6, 2-8, 3-0, 3-6 x 8-0 ) Matching Sidelite: SLG , ": 2/ ": 2/ " " 8.500" " " " 7.375" " 3.250" DRG S-22 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

73 8/0 WOODGRIN SIX PNEL DOOR MODEL DRG6080 (2-6, 2-8, 3-0, 3-6 x 8-0 ) Matching Sidelites: SLG " " " " " " " " " 7.375" 4.672" 5.000" " " 7.250" 3.750" " " " 5.500" 5.000" 3.750" 4.672" 5.688" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE TOP LITE TOP 2 LITE * 3-0 & 3-6 Doors Only 3/4 LITE 26-1/2 x 51 (cut-out) * /2 x 50 3/4 LITE 30-3/8 x 51-1/4 (cut-out) * /8 x 50-1/4 TOP LITE 26-1/2 x 10 (cut-out) *3-0 only 25-1/2 x 9 TOP 2 LITE 11-1/2 x 10 (cut-out) *3-0 only 10-1/2 x 9 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-23

74 8/0 WOODGRIN EIGHT PNEL DOOR MODEL DRG8080 (3-0, 3-6 x 8-0 ) Matching Sidelite: SLG " 41.75" 5.00" 25.75" 5.00" 25.75" 12.75" 12.75" 95.25" 95.25" 9.25" 10.75" 9.25" 10.75" 5.25" 5.00" 5.25" 8.00" CUT-OUTS & GLSS INSERT VILBLE CENTER LITE CENTER LITE 10-3/4 x 58-1/2 (cut-out) 9-1/2 x 57-1/ /16 DRG S-24 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

75 8/0 WOODGRIN NINE PNEL DOOR MODEL DRG9180 (3-0 x 8-0 ) " " 6.000" 6.500" 2.000" 5.000" " " " 2.000" " 2.000" 2.000" 6.000" 9.000" 5.000" CUT-OUTS & GLSS INSERT VILBLE CENTER LITE CENTER LITE 9 x 49 (cut-out) 8 x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRG S-25

76

77 6/8 WOODGRIN FLUSH SIDELITE MODEL SLG00 (1-0, 1-2 x 6-8 ) Matching Door: DRG " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-1

78 6/8 WOODGRIN 3/4 ELITE SIDELITE MODEL SLG3E (1-0, 1-2 x 6-8 ) Matching Door: DRG3E " " " " " " " " " " 7.875" 1.938" 7.875" 2.938" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 9 x 49 (cut-out) 8 x 48 5 SLG S-2 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

79 6/8 WOODGRIN 3/4 OVL PREMIUM SIDELITE MODEL SLG3P (1-0, 1-2 x 6-8 ) Matching Door: DRG3P " " 8.25" 8.25" 17.75" 17.75" 40.5" 40.5" 9.469" 9.469" 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE 3/4 OVL LITE FULL LITE 8 x 65 (cut-out) 7 x /4 OVL LITE Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-3

80 6/8 WOODGRIN 3/4 FOUR PNEL SIDELITE MODEL SLG49 (1-0, 1-2 x 6-8 ) Matching Door: DRG " " 8.063" " " 8.063" " " 8.063" " " " " " " " 7.875" 1.938" 7.875" 2.938" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 9 x 49 (cut-out) 8 x /16 SLG S-4 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

81 6/8 WOODGRIN SIX PNEL SIDELITE MODEL SLG60 (1-0, 1-2 x 6-8 ) Matching Doors: DRG60, DRG40, DRG41, DRG4E " " 8.000" 8.000" " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 6 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-5

82 6/8 WOODGRIN SIX PNEL SIDELITE *No stock in US, drop ship only MODEL SLG60-DS (1-0, 1-2 x 6-8 ) Matching Doors: DRG60, DRG " " 9.250" " " 9.250" " " 1 5/16" 2 5/16" CUT-OUTS & GLSS INSERT VILBLE HLF LITE 1 HLF LITE 2 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 SLG S-6 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

83 6/8 WOODGRIN EIGHT PNEL SIDELITE MODEL SLG80 (1-0, 1-2 x 6-8 ) Matching Door: DRG " " 8.563" " " 2.000" 2.000" " " 7.813" 7.813" 5.000" 5.000" 9.000" 9.000" 8.563" 1 7/16" 2 7/16" CUT-OUTS & GLSS INSERT VILBLE CENTER RCH LITE CENTER RCH LITE 9 x 42 (cut-out) 8 x 41 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-7

84

85 7/0 WOODGRIN FLUSH SIDELITE MODEL SLG0070 (1-0, 1-2 x 7-0 ) Matching Door: DRG " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-9

86 7/0 WOODGRIN FOUR PNEL SIDELITE MODEL SLG4170 (1-0, 1-2 x 7-0 ) Matching Door: DRG " " " 8.000" 8.000" " " " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 SLG S-10 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

87 7/0 WOODGRIN SIX PNEL UTILITY SIDELITE MODEL SLG6170 (1-0, 1-2 x 7-0 ) Matching Door: DRG " " " 8.000" " 8.000" " " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-11

88 8/0 WOODGRIN FLUSH SIDELITE MODEL SLG0080 (1-0, 1-2 x 8-0 ) Matching Door: DRG " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE 1 FULL LITE 2 FULL LITE 1 8 x 81 (cut-out) 7 x 80 6 FULL LITE 2 9 x 81 (cut-out) 8 x 80 6 SLG S-12 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

89 8/0 WOODGRIN THREE PNEL SIDELITE MODEL SLG3080 (1-0, 1-2 x 8-0 ) Matching Doors: DRG3080, DRG6080, DRG " " " 8.000" 9.250" " " 8.000" 9.250" " 1.937" 1.937" 2.937" 2.937" CUT-OUTS & GLSS INSERT VILBLE FULL LITE 3/4 LITE FULL LITE 9 x 81 (cut-out) 8 x 80 3/4 LITE 8 x 65 (cut-out) 7 x 64 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-13

90 8/0 WOODGRIN TRUE FOUR PNEL SIDELITE MODEL SLG4180 (1-0, 1-2 x 8-0 ) Matching Door: DRG " " " 8.000" 8.000" " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE FULL LITE 9 x 81 (cut-out) 8 x 80 HLF LITE 9 x 49 (cut-out) 8 x 48 6 SLG S-14 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

91 6/8 FIR GRIN DIRECT GLZED CRFTSMN DOOR MODEL DRF3C (3-0 x 6-8 ) Matching Sidelite: SLF3C " " 7.000" " +_ 0.031" 5.881" " 4.500" 5.000" " 4.250" " 5.000" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRF S-1

92 8/0 FIR GRIN DIRECT GLZED CRFTSMN DOOR MODEL DRF3C80 (3-0 x 8-0 ) Matching Sidelite: SLF3C " GLS " 8.000" " " 5.875" GLS22.750" 4.750" 4.875" 4.250" " DRF S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

93 6/8 FIR GRIN DIRECT GLZED CRFTSMN SIDELITE MODEL SLF3C (1-0, 1-2 x 6-8 ) Matching Door: DRF3C " 8.75" " 8.75" 7.000" " 5.875" 7.000" " 5.875" " " 4.500" 4.500" " " Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications SLF S-1

94 8/0 FIR GRIN DIRECT GLZED CRFTSMN SIDELITE MODEL SLF3C80 (1-0, 1-2 x 8-0 ) Matching Door: DRF3C " 8.75" " 8.75" " 8.000" " 5.875" " 8.000" " 5.875" " " 4.750" 4.750" " " SLF S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

95 6/8 CHERRY 3/4 TWO PNEL DOOR MODE L DRC21 (2, 2 10, 3 x 6 2-8, ": 2/ ": 2/ " " " " " " " 4.500" 4.500" " " 4.500" 4.500" CUT-OUTS & GLS S INS E RT VILB LE FULL LITE FULL LITE 23 x 65 (cut-out) 22 x DRC S-1 DOOR S LB Product S pecifications Plastpro 2000 Inc. ll R ights R eserved. This Plastpro Customer K it is

96

97 6/8 TRUE WHITE OK FLUSH DOOR MODEL DRW00 (2-6, 2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLW00 2-6, 2-8, ": 2/ ": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE FULL OVL LITE FULL LITE FULL OVL LITE 8 FULL LITE 23 x 65 (cut-out) *2-8, 2-10, 22 x FULL LITE 21 x 65 (cut-out) * x 64 Plastpro 2000 Inc. ll Rights Reserved This Plastpro Customer Kit is DOOR SLB Product Specifications DRW S-1

98 6/8 TRUE WHITE OK FOUR PNEL BLNK TOP MODEL DRW40 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLW60 2-8, ": 2/ ": 2/ " " " 4.500" " 4.500" " " " 5.250" 5.250" " " 9.000" 9.000" 4.625" : 2/ " : 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF ROUND LITE HLF LITE FULL LITE HLF ROUND LITE 4 HLF LITE 23 x 37 (cut-out) 22 x 36 FULL LITE 23 x 65 (cut-out) 22 x DRW S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

99 6/8 TRUE WHITE OK TRUE FOUR PNEL DOOR MODEL DRW41 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLW60 2-8, ": 2/ ": 2/ " " " 4.500" " " 6.250" 5.000" 4.500" 5.000" " " 6.250" 9.000" 9.000" 9.000" 9.000" 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE TWIN LITE HLF LITE * 2-8, 2-10, 3-0 Doors Only TWIN LITE 9 x 37 (cut-out) 8 x 36 HLF LITE 23 x 37 (cut-out) 22 x 36 5 Plastpro 2000 Inc. ll Rights Reserved This Plastpro Customer Kit is DOOR SLB Product Specifications DRW S-3

100 6/8 TRUE WHITE OK SIX PNEL DOOR MODEL DRW60 (3-0 x 6-8 ) Matching Sidelite: SLW " " 6.000" 3.750" " " 3.250" 6.250" 9.250" " 4.688" CUT-OUTS & GLSS INSERT VILBLE TOP LITE HLF LITE TOP LITE 26-1/2 x 9-1/4 (cut-out) * /2 x 8-1/4 5 HLF LITE 26 x 35-1/2 (cut-out) * x 34-1/2 5 DRW S-4 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

101 6/8 TRUE WHITE OK SIX PNEL UTILITY DOOR MODEL DRW61 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLW61 2-8, ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" 5.000" " " 6.250" 6.250" " " 3.250" 3.250" 7.000" 7.000" 9.000" 9.250" 9.000" 9.250" 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE TOP LITE TWIN LITE HLF LITE 23 x 37 (cut-out) 22 x 36 TOP LITE 23 x 65 (cut-out) 22 x 64 TWIN LITE 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved This Plastpro Customer Kit is DOOR SLB Product Specifications DRW S-5

102 7/0 TRUE WHITE OK FLUSH DOOR MODEL DRW0070 (2-6, 2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLW , 2-8, ": 2/ ": 2/ ": 2/ " " 4.500" 7.000" 5.000" " " 6.250" " 3.250" 9.000" 9.250" 6.625" CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 21 x 65 (cut-out) * x 64 FULL LITE 23 x 65 (cut-out) *2-8, 2-10 & 22 x /2 DRW S-6 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

103 7/0 TRUE WHITE OK TRUE FOUR PNEL DOOR MODEL DRW4170 (2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLW , ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" " " " 6.250" " " " 6.250" 5.000" 9.000" 9.000" " 9.000" 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE TWIN LITE HLF LITE TWIN LITE 9 x 37 (cut-out) 8 x 36 HLF LITE 23 x 37 (cut-out) 22 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRW S-7

104 7/0 TRUE WHITE OK SIX PNEL UTILITY DOOR MODEL DRW6170 (2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLW , ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" 5.000" " " " 6.250" " 6.250" " " 3.250" 3.250" 7.000" 7.000" 9.000" " 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE FULL LITE HLF LITE 23 x 37 (cut-out) 22 x 36 FULL LITE 23 x 65 (cut-out) 22 x 64 5 DRW S-8 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

105 6/8 TRUE WHITE OK FLUSH SIDELITE MODEL SLW00 (1-0, 1-2 x 6-8 ) Matching Door: DRW " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLW S-9

106 6/8 TRUE WHITE OK SIX PNEL SIDELITE MODEL SLW60 (1-0, 1-2 x 6-8 ) Matching Door: DRW60, DRW40, DRW " " 8.000" 8.000" " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 SLW S-10 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

107 6/8 TRUE WHITE OK SIX PNEL UTILITY SIDELITE MODEL SLW61 (1-0, 1-2 x 6-8 ) Matching Door: DRW " " 8.000" 8.000" 9.250" 9.250" " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-11

108 7/0 TRUE WHITE OK FLUSH SIDELITE MODEL SLW0070 (1-0, 1-2 x 7-0 ) Matching Door: DRW " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x /2 SLW S-12 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

109 7/0 TRUE WHITE OK TRUE FOUR PNEL SIDELITE MODEL SLW4170 (1-0, 1-2 x 7-0 ) Matching Door: DRW " " " 8.000" 8.000" " " " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLG S-13

110 7/0 TRUE WHITE OK SIX PNEL UTILITY SIDELITE MODEL SLW6170 (1-0, 1-2 x 7-0 ) Matching Door: DRW " " " 8.000" " 8.000" " " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 SLW S-14 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

111 6/8 SMOOTH SKIN FLUSH DOOR MODEL DRS00 (2-6, 2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS00 2-6, 2-8, ": 2/ ": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE FULL OVL LITE FULL LITE FULL OVL LITE 8 FULL LITE 23 x 65 (cut-out) *2-8, 2-10, 22 x FULL LITE 21 x 65 (cut-out) * x 64 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-1

112 6/8 SMOOTH SKIN 3/4 HERITGE DOOR MODEL DRS20 (3-0 x 6-8 ) Matching Sidelites: SLS3E, SLS " " " 3.500" " 5.000" 4.875" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 LITE 3/4 OVL LITE 9-7/16 3/4 LITE 26 x 49 (cut-out) 25 x 48 5 DRS S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

113 6/8 SMOOTH SKIN 3/4 TWO PNEL DOOR MODEL DRS29 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelites: SLS3E, SLS60 2-8, ": 2/ ": 2/ " " " " " 4.000" 4.000" " " 5.500" 5.500" 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 23 x 49 (cut-out) 22 x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-3

114 6/8 SMOOTH SKIN TWO PNEL SQURE PNEL / SQURE TOP MODEL DRS2B (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS60 2-8, ": 2/ ": 2/ " " " " 5.250" " " " 5.250" 5.000" 5.000" 4.375": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRS S-4 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

115 6/8 SMOOTH SKIN TWO PNEL RCH PNEL / SQURE TOP MODEL DRS2D (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS60 2-8, ": 2/ ": 2/ " " " " 5.250" " 5.000" R23.945" " " 5.250" 5.000" R23.945" 4.375": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 37 (cut-out) 22 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-5

116 6/8 SMOOTH SKIN COTTGE DOOR MODEL DRS2G (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS00 2-8, ": 2/ ": 2/ " " " R23.945" 0.284" 5.250" " 5.000" R23.945" " 5.250" " 5.000" 0.284" " 1.493" 2.986" 1.493" 2.986" 4.375": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRS S-6 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

117 6/8 SMOOTH SKIN 3/4 ELITE DOOR MODEL DRS3E (3-0 x 6-8 ) Matching Sidelites: SLS3E, SLS " " " 3.500" " " 9.504" 5.000" " 3.500" 4.875" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 LITE 3/4 OVL LITE 9-7/16 3/4 LITE 26 x 49 (cut-out) 25 x 48 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-7

118 6/8 SMOOTH SKIN 3/4 PREMIUM DOOR MODEL DRS3P (3-0 x 6-8 ) Matching Sidelite: SLS3P " " " " " " 4.438" 8.691" " 2.750" 4.750" CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 OVL LITE 8-11/16 DRS S-8 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

119 6/8 SMOOTH SKIN FOUR PNEL BLNK TOP DOOR MODEL DRS40 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS60 2-8, ": 2/ ": 2/ " " " 4.500" " 4.500" " 5.250" " " 5.250" " " 9.000" 9.000" 4.625" : 2/ " : 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF ROUND LITE HLF LITE FULL LITE HLF ROUND LITE 4 HLF LITE 23 x 37 (cut-out) 22 x 36 5 FULL LITE 23 x 65 (cut-out) 22 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-9

120 6/8 SMOOTH SKIN TRUE FOUR PNEL DOOR MODEL DRS41 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS60 2-8, ": 2/ ": 2/ " " " 4.500" " " 6.250" 5.000" 4.500" 5.000" " " 6.250" 9.000" 9.000" 9.000" 9.000" 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF TWIN LITE HLF LITE * 2-8, 2-10, 3-0 Doors Only HLF TWIN LITE 9 x 37 (cut-out) 8 x 36 HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRS S-10 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

121 6/8 SMOOTH SKIN 3/4 FOUR PNEL DOOR MODEL DRS49 (2-8, 3-0 x 6-8 ) Matching Sidelites: SLS49, SLS " " " " 8.063" 8.063" " " 4.000" 4.000" " " 4.688" 4.688" 4.625" 6.625" CUT-OUTS & GLSS INSERT VILBLE 3/4 TWIN LITE 3/4 LITE 3/4 TWIN LITE 9 x 49 (cut-out) 8 x 48 3/4 LITE 23 x 49 (cut-out) 22 x Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-11

122 6/8 SMOOTH SKIN SIX PNEL DOOR MODEL DRS60 (2-6, 2-8, 3-0 x 6-8 ) Matching Sidelite: SLS60 2-6, ": 2/ ": 2/ " " " " 3.250" 9.250" 5.000" 3.250" " 6.313" 5.000" 3.750" " " 3.250" 9.250" 6.250" 8.500" " 4.750": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE TOP LITE HLF LITE TOP LITE 26-1/2 x 9-1/4 (cut-out) * /2 x 8-1/4 TOP 2 LITE 9-1/4 x 11-1/4 (cut-out) * /4 x 10-1/4 HLF LITE 21 x 37 (cut-out) *2-6 & x 36 5 HLF LITE 26 x 35-1/2 (cut-out) * x 34-1/2 5-1/4 DRS S-12 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

123 6/8 SMOOTH SKIN SIX PNEL UTILITY DOOR MODEL DRS63 (2-8, 2-10, 3-0 x 6-8 ) Matching Sidelite: SLS60 2-8, ": 2/ ": 2/ ": 2/ ": 2/10 CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 37 (cut-out) 22 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-13

124 6/8 SMOOTH SKIN CRFTSMN DOOR MODEL DRS6C (3-0 x 6-8 ) Matching Sidelite: SLS " " 8.313" " 5.000" " 5.938" 4.938" 7.500" CUT-OUTS & GLSS INSERT VILBLE TOP LITE TOP LITE 26 x 16 (cut-out) 25 x 15 6 DRS S-14 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

125 6/8 SMOOTH SKIN EIGHT PNEL DOOR MODEL DRS80 (3-0 x 6-8 ) Matching Sidelite: SLS " " 2.000" 7.750" " " 2.000" " 2.000" " 2.000" 5.813" 5.000" 2.000" 8.500" 5.002" " 5.500" 5.000" CUT-OUTS & GLSS INSERT VILBLE CENTER RCH LITE CENTER RCH LITE 10-3/4 x /4 x 41 (cut-out) 12-13/16 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-15

126 6/8 SMOOTH SKIN NINE PNEL DOOR MODEL DRS90 (2-8, 3-0 x 6-8 ) Matching Sidelite: SLS " " 2.000" 2.000" 5.000" 2.000" 2.000" " " 2.000" 2.000" " " 2.000" 2.000" 8.000" 5.000" 8.000" 5.188" 8.500" 5.188" 5.188" 8.500" 5.188" 4.437" 6.437" CUT-OUTS & GLSS INSERT VILBLE CENTER LITE CENTER LITE 8-1/2 x 19-1/2 (cut-out) 7-1/2 x 18-1/2 15 DRS S-16 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

127 6/8 SMOOTH SKIN DIRECT GLZED CRFTSMN MODEL DRS3C (3-0 x 6-8 ) Matching Sidelite: SLS3C " GLS " +_ 0.031" " 7.000" 5.881" GLS " 4.500" 5.000" Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-17

128 6/8 SMOOTH SKIN THREE PNEL DOOR MODEL DRS31 (3-0 x 6-8 ) " 3.250" 3.250" 7.688" " 7.750" " 4.500" R24.323" " 6.625" " CUT-OUTS & GLSS INSERT VILBLE HLF LITE 3/4 LITE Half Lite 23 x 37 (cut-out) 22 x 36 3/4 Lite 23 x 49 (cut-out) 22 x /2 *glass thickness: 3/4 DRS S-18 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

129 7/0 SMOOTH SKIN FLUSH DOOR MODEL DRS0070 (2-6, 2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLS , 2-8, ": 2/ ": 2/ ": 2/ " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 21 x 65 (cut-out) * x 64 FULL LITE 23 x 65 (cut-out) *2-8 & x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-19

130 7/0 SMOOTH SKIN FOUR PNEL DOOR MODEL DRS4170 (2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLS , ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" " " " 6.250" " " " 6.250" 5.000" 9.000" 9.000" " 9.000" 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF TWIN LITE HLF LITE HLF TWIN LITE 9 x 37 (cut-out) 8 x 36 HLF LITE 23 x 37 (cut-out) 22 x 36 5 DRS S-20 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

131 7/0 SMOOTH SKIN SIX PNEL UTILITY DOOR MODEL DRS6170 (2-8, 2-10, 3-0 x 7-0 ) Matching Sidelite: SLS , ": 2/ ": 2/ " " " 4.500" 5.000" 4.500" " " " 6.250" " 6.250" " " 3.250" 7.000" 7.000" 3.250" 5.000" 9.000" " 9.000" " 4.625": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE FULL LITE HLF LITE 23 x 37 (cut-out) 22 x 36 FULL LITE 23 x 65 (cut-out) 22 x 64 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-21

132 7/0 SMOOTH SKIN THREE PNEL DOOR MODEL DRS3170 (3-0 x 7-0 ) " " 3.250" " " 6.000" R24.323" " " 7.750" " 6.625" " CUT-OUTS & GLSS INSERT VILBLE HLF LITE 3/4 LITE HLF LITE 23 x 37 (cut-out) 22 x 36 3/4 LITE 23 x 49 (cut-out) 22 x 48 6 *glass thickness: 3/4 DRG S-22 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

133 8/0 SMOOTH SKIN FLUSH DOOR MODEL DRS0080 (2-6, 2-8, 2-10, 3-0 x 8-0 ) Matching Sidelite: SLG , 2-8, ": 2/ ": 2/ ": 2/ " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 21 x 81 (cut-out) * x 80 FULL LITE 23 x 81 (cut-out) *2-8, 2-10 & 22 x Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-23

134 8/0 SMOOTH SKIN TWO PNEL SQURE PNEL / SQURE TOP MODEL DRS2B80 (2-8, 2-10, 3-0 x 8-0 ) Matching Sidelite: SLS , ": 2/ ": 2/ " " " " " " " " " 6.000" 6.000" 4.375": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 49 (cut-out) 22 x 48 6 DRS S-24 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

135 8/0 SMOOTH SKIN TWO PNEL RCH PNEL / SQURE TOP MODEL DRS2D80 (2-8, 2-10, 3-0 x 8-0 ) Matching Sidelite: SLS , ": 2/ ": 2/ " " " " " " 6.000" R23.94" " " " 6.000" R23.94" 4.375": 2/ ": 2/ " CUT-OUTS & GLSS INSERT VILBLE HLF LITE HLF LITE 23 x 49 (cut-out) 22 x 48 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-25

136 8/0 SMOOTH SKIN THREE PNEL DOOR MODEL DRS3080 (2-8, 3-0, 3-6 x 8-0 ) Matching Sidelite: SLS , " 23.00" 35.75": 3/ ": 3/ " 95.25" " 4.23" 5.000" 9.75" 95.25" " 4.230" 5.000" 9.875" 9.25" 12.77" 9.875" 9.25" 12.77" 9.75" 3.25" 4.375" 3.25" 6.375": 3/ ": 3/6 CUT-OUTS & GLSS INSERT VILBLE 3/4 OVL LITE 3/4 LITE FULL LITE 3/4 OVL LITE 14-1/2 x 54-1/2 (cut-out) 12.6 x /4 LITE 23 x 65 (cut-out) 22 x 64 FULL LITE 23 x 81 (cut-out) 22 x 80 5 DRS S-26 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

137 8/0 SMOOTH SKIN DIRECT GLZED CRFTSMN MODEL DRS3C80 (3-0 x 8-0 ) Matching Sidelite: SLS3C " GLS " 8.000" " GLS22.750" 4.750" 4.875" " Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S-27

138 8/0 SMOOTH SKIN TRUE FOUR PNEL DOOR MODEL DRS4180 (2-8, 3-0 x 8-0 ) Matching Sidelite: SLS " " " " " 6.000" 6.000" 4.500" " " " 4.500" 4.625" 6.625" CUT-OUTS & GLSS INSERT VILBLE 3/4 TWIN LITE 3/4 LITE FULL LITE 3/4 TWIN LITE 9 x 49 (cut-out) 8 x 48 3/4 LITE 23 x 49 (cut-out) 22 x 48 FULL LITE 23 x 81 (cut-out) 22 x 80 6 DRS S-28 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

139 8/0 SMOOTH SKIN SIX PNEL DOOR MODEL DRS6080 (2-6, 2-8, 3-0 x 8-0 ) Matching Sidelite: SLS , ": 2/ ": 2/ " " " " 8.500" " " " 7.375" " " " " " " 7.375" 4.672" 5.000" 3.250" 4.750": 2/ ": 2/ " 4.672" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE TOP LITE TOP 2 LITE * 3-0 & 3-6 Doors Only 3/4 LITE 26-1/2 x 51 (cut-out) * /2 x 50 3/4 LITE 30-3/8 x 51-1/4 (cut-out) * /8 x 50-1/4 TOP LITE 26-1/2 x 10 (cut-out) *3-0 only 25-1/2 x 9 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRS S -29

140 8/0 SMOOTH SKIN EIGHT PNEL DOOR MODEL DRS8080 (3-0, 3-6 x 8-0 ) Matching Sidelite: SLS " 41.75" 5.00" 25.75" 5.00" 25.75" 9.25" 12.75" 12.75" 95.25" 95.25" 10.75" 9.25" 10.75" 5.25" 5.00" 5.25" 8.00" CUT-OUTS & GLSS INSERT VILBLE CENTER RCH LITE CENTER RCH LITE 10-3/4 x 58-1/2 (cut-out) 9-1/2 x 57-1/ /16 DRS S-30 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

141 6/8 SMOOTH SKIN FLUSH SIDELITE MODEL SLS00 (1-0, 1-2 x 6-8 ) Matching Door: DRS " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x 64 6 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-1

142 6/8 SMOOTH SKIN 3/4 ELITE SIDELITE MODEL SLS3E (1-0, 1-2 x 6-8 ) Matching Door: DRS3E, DRS " " " " " " " " " " 7.875" 1.938" 7.875" 2.938" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 9 x 49 (cut-out) 8 x 48 5 SLS S-2 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

143 6/8 SMOOTH SKIN 3/4 OVL PREMIUM SIDELITE MODEL SLS3P (1-0, 1-2 x 6-8 ) Matching Door: DRS3P " " 8.25" 8.25" 17.75" 17.75" 40.5" 40.5" 9.469" 9.469" 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE 3/4 OVL LITE FULL LITE 8 x 65 (cut-out) 7 x /4 OVL LITE 8-1/8 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-3

144 6/8 SMOOTH SKIN 3/4 FOUR PNEL SIDELITE MODEL SLS49 (1-0, 1-2 x 6-8 ) Matching Door: DRS " " 8.063" " " 8.063" " " 8.063" " " " " " " " 7.875" 1.938" 7.875" 2.938" CUT-OUTS & GLSS INSERT VILBLE 3/4 LITE 3/4 LITE 9 x 49 (cut-out) 8 x /16 SLS S-4 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

145 6/8 SMOOTH SKIN SIX PNEL SIDELITE MODEL SLS60 (1-0, 1-2 x 6-8 ) Matching Doors: DRS60, DRS40, DRS41, DRS4E " " 8.000" 8.000" " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 6 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-5

146 6/8 SMOOTH SKIN DIRECT GLZED CRFTSMN SIDELITE MODEL SLS3C (1-0, 1-2 x 6-8 ) Matching Door: DRS3C " 8.75" " 8.75" 7.000" " 5.875" 7.000" " 5.875" " " 4.500" 4.500" " " SLS S-6 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

147 6/8 SMOOTH SKIN EIGHT PNEL SIDELITE MODEL SLS80 (1-0, 1-2 x 6-8 ) Matching Door: DRS " " " 2.000" 8.563" " 2.000" " " 7.813" 7.813" 5.000" 5.000" 9.000" 9.000" 8.563" 1 7/16" 2 7/16" CUT-OUTS & GLSS INSERT VILBLE HLF LITE CENTER RCH LITE 9 x 42 (cut-out) 8 x /16 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-7

148

149 7/0 SMOOTH SKIN FLUSH SIDELITE MODEL SLS0070 (1-0, 1-2 x 7-0 ) Matching Door: DRS " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 8 x 65 (cut-out) 7 x /2 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-9

150 7/0 SMOOTH SKIN FOUR PNEL SIDELITE MODEL SLS4170 (1-0, 1-2 x 7-0 ) Matching Door: DRS " " " 8.000" 8.000" " " " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 SLS S-10 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

151 7/0 SMOOTH SKIN SIX PNEL UTILITY SIDELITE MODEL SLS6170 (1-0, 1-2 x 7-0 ) Matching Door: DRS " " " 8.000" " 8.000" " " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE 1 HLF LITE 2 FULL LITE 8 x 65 (cut-out) 7 x 64 5 HLF LITE 1 8-3/4 x 35-1/2 (cut-out) 7-3/4 x 34-1/2 5-1/4 HLF LITE 2 9 x 37 (cut-out) 8 x 36 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-11

152 8/0 SMOOTH SKIN FLUSH SIDELITE MODEL SLS0080 (1-0, 1-2 x 8-0 ) Matching Door: DRS " " " " CUT-OUTS & GLSS INSERT VILBLE FULL LITE FULL LITE 9 x 81 (cut-out) 8 x 80 6 SLS S-12 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

153 8/0 SMOOTH SKIN THREE PNEL SIDELITE MODEL SLS3080 (1-0, 1-2 x 8-0 ) Matching Doors: DRS3080, DRS6080, DRS " " " 8.000" 9.250" " 9.250" " " 8.000" 1.937" 1.937" 2.937" 2.937" CUT-OUTS & GLSS INSERT VILBLE FULL LITE 3/4 LITE FULL LITE 9 x 81 (cut-out) 8 x 80 3/4 LITE 8 x 65 (cut-out) 7 x 64 5 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-13

154 8/0 SMOOOTH SKIN TRUE FOUR PNEL SIDELITE MODEL SLS4180 (1-0, 1-2 x 8-0 ) Matching Door: DRS " " " 8.000" 8.000" " " " 1.938" 2.938" CUT-OUTS & GLSS INSERT VILBLE FULL LITE HLF LITE FULL LITE 9 x 81 (cut-out) 8 x 80 HLF LITE 9 x 49 (cut-out) 8 x 48 6 SLS S-14 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

155 8/0 SMOOTH SKIN DIRECT GLZED CRFTSMN SIDELITE MODEL SLS3C80 (1-0, 1-2 x 8-0 ) Matching Door: DRS3C " 8.75" " 8.75" " 8.000" " 5.875" " 8.000" " 5.875" " " 4.750" 4.750" " " Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLS S-15

156

157 TRIMMBLE DOOR *Woodgrain & Smooth Skin " 36" T= 0.5" T= 0.5" 80" T=1.5" T=1.5" T=1" T=1" T=1" T=1" *T=Trimmable Dimension Trimmable Stiles Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is Polyurethane Core Reinforced Fiberglass Skin Trimmable Rail 36 X 80 WOODGRIN DRG00T - Flush DRG41T - True Four Panel DRG61T - Six Panel Utility 36 X 80 SMOOTH SKIN DRS00T - Flush DRS41T - True Four Panel DRS61T - Six Panel Utility 36 X 79 1/4 SMOOTH SKIN DRS40T - Four Panel Blank Top DRS90T - Nine Panel DRS2BT - Two Panel w/ Square Panel DRS2DT - Two Panel w/ rch Panel DRS2GT - Cottage DOOR SLB Product Specifications DRT S-1

158

159 6/8 ONELITE FLUSH GLZED FULL LITE DOOR *Woodgrain & Smooth Skin MODEL DRG/DRS10 (2-0, 2-6, 2-8, 3-0 x 6-8 ) Matching Sidelite: SLG/SLS10 2-0, 2-6, ": 2/ ": 2/ ": 2/ ": 2/ ": 2/ ": 2/ " " 8.500" 8.500" " " " " 3.870" 3.870" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG, LoE 2 & Miniblind between glass FULL LITE /16 x /4 x 65-15/16 (daylite opening) /16 x /4 x 65-15/16 (daylite opening) /16 x /4 x 65-15/16 (daylite opening) /16 x /4 x 65-15/16 (daylite opening) *glass thickness: 5/8 4-13/16 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRO S-1

160 6/8 ONELITE FLUSH GLZED HLF LITE DOOR *Woodgrain & Smooth Skin MODEL DRG/DRS12 (2-8, 3-0 x 6-8 ) Matching Sidelite: SLG/SLS " " " " " " " " " " " 4.094" " 6.094" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG, LoE 2 & Miniblind between glass HLF LITE x /16 x 34-15/16 (daylite opening) x /16 x 34-15/16 (daylite opening) 4-3/16 *glass thickness: 1 DRO S-2 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

161 6/8 ONELITE FLUSH GLZED 3/4 LITE DOOR *Mahogany & Smooth Skin MODEL DRM/DRS13 (2-6, 2-8, 3-0 x 6-8 ) Matching Sidelite: SLM/SLS13 2-6, : 2/6 / : 2/ : 2/6 / : 2/ " " " " 5.250" 5.250" " " " " 5.250" 5.250" 4.875": 2/ ": 2/ " DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG & LoE 2 3/4 LITE x /4 x 47-1/4 (daylite opening) x /4 x 47-1/4 (daylite opening) x /4 x 47-1/4 (daylite opening) 4-7/16 *glass thickness: 3/4 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRO S-3

162 6/8 ONELITE FLUSH GLZED D DOOR *Smooth Skin MODEL DRS11 (3-0 x 6-8 ) DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, LOE 2, 1 Sound Barrier Glass FULL LITE /4 x 61-1/4 22-3/4 x 60-1/4 (daylite opening) 6-1/2 *glass thickness: 5/8 DRO S-4 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

163 7/0 ONELITE FLUSH GLZED D DOOR *Smooth Skin MODEL DRS1170 (3-0 x 7-0 ) DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, LOE 2, 1 Sound Barrier Glass HLF LITE /4 x 65-1/4 22-3/4 x 64-1/4 (daylite opening) 6-1/2 *glass thickness: 5/8 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRO S-5

164 8/0 ONELITE FLUSH GLZED FULL LITE DOOR *Smooth Skin MODEL DRS1080 (2-6, 2-8, 3-0 x 8-0 ) Matching Sidelite: SLS , ": 2/0 / ": 2/ ": 2/ ": 2/0 / ": 2/ ": 2/ " " " " " 11" 11 1" 1" 78" " " " DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG, LoE 2 & Miniblind between glass FULL LITE /16 x /16 x 78 (daylite opening) /16 x /16 x 78 (daylite opening) /16 x /16 x 78 (daylite opening) *glass thickness: 5/8 DRO S-6 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

165 8/0 ONELITE FLUSH GLZED WIDE STILE DOOR *Woodgrain & Smooth Skin MODEL DRG/DRS1W80 (2-6, 2-8, 3-0 x 8-0 ) Matching Door: SLG/SLS1W , ": 2/ " ": 2/ ": 3/ " " " " " " " " " " " 4.375": 2/ ": 2/ ": 3/0 DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG & LoE 2 FULL LITE x x 79 (daylite opening) x x 79 (daylite opening) x x 79 (daylite opening) *glass thickness: 5/8 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRO S-7

166 63.250" 8/0 ONELITE FLUSH GLZED 3/4 LITE DOOR *Mahogany & Smooth Skin MODEL DRM/DRS1380 (2-6, 2-8, 3-0 x 8-0 ) Matching Sidelite: SLM/SLS , : 2/6 / : 2/ : 2/6 / : 2/ " " " " 6.063" " 6.063" " " " " : 2/ : 2/ " DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG & LoE 2 3/4 LITE x /4 x 63-1/4 (daylite opening) x /4 x 63-1/4 (daylite opening) x /4 x 63-1/4 (daylite opening) 4-7/16 *glass thickness: 3/4 DRO S-8 DOOR SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

167 8/0 ONELITE FLUSH GLZED D DOOR *Smooth Skin MODEL DRS1180 (3-0 x 8-0 ) DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, LOE 2, 1 Sound Barrier Glass FULL LITE /4 x 77-1/4 22-3/4 x 76-1/4 (daylite opening) 6-1/2 *glass thickness: 5/8 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is DOOR SLB Product Specifications DRO S-9

168

169 6/8 ONELITE FLUSH GLZED FULL LITE SIDELITE *Woodgrain & Smooth Skin MODEL SLG/SLS10 (1-0, 1-2 x 6-8 ) Matching Door: DRG/DRS " 6.250" " 6.250" 8.500" 8.500" " " " 4.813" 2.750" 3.750" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG & LoE 2 FULL LITE /16 x /4 x 65-15/16 (daylite opening) /16 x /4 x 65-15/16 (daylite opening) 4-13/16 *glass thickness: 5/8 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLO S-11

170 6/8 ONELITE FLUSH GLZED HLF LITE SIDELITE *Woodgrain & Smooth Skin MODEL SLG/SLS12 (1-0, 1-2 x 6-8 ) Matching Door: DRG/DRS " " " " " " " " 1.125" 2.125" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG, LoE 2 HLF LITE x /16 x 34-15/16 (daylite opening) x /16 x 34-15/16 (daylite opening) 4-3/16 *glass thickness: 1 SLO S-12 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

171 6/8 ONELITE FLUSH GLZED 3/4 LITE SIDELITE *Mahogany & Smooth Skin MODEL SLM/SLS13 (1-0, 1-2 x 6-8 ) Matching Door: DRM/DRS " " 6.25" " " 6.25" 8.25" 13.25" 5.25" 8.25" 13.25" 5.25" 79.25" 79.25" 47.25" 47.25" 5.25" 5.25" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, LoE 2 3/4 LITE x /4 x 47-1/4 (daylite opening) x /4 x 47-1/4 (daylite opening) 5-1/4 *glass thickness: 3/4 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLO S-3

172 8/0 ONELITE FLUSH GLZED FULL LITE SIDELITE *Woodgrain & Smooth Skin MODEL SLG/SLS1080 (1-0, 1-2 x 8-0 ) Matching Door: DRG/DRS " " " " " " " 78" " 78" 1" " 1" " DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG, LoE 2 & Miniblind between glass FULL LITE x 79 6 x 78 (daylite opening) x 79 6 x 78 (daylite opening) 5-5/16 *glass thickness: 5/8 SLO S-14 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

173 8/0 ONELITE FLUSH GLZED WIDE STILE SIDELITE *Woodgrain & Smooth Skin MODEL SLG/SLS1W80 (1-0, 1-2 x 8-0 ) Matching Door: DRG/DRS1W " 8.000" " 8.000" " " " " " " 1" 1" 4.750" 4.750" 1.875" 2.875" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG, GBG, & LoE 2 FULL LITE x 80 6 x 79 (daylite opening) x 80 6 x 79 (daylite opening) 5-3/4 *glass thickness: 5/8 Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is SIDELITE SLB Product Specifications SLO S-15

174 8/0 ONELITE FLUSH GLZED 3/4 LITE SIDELITE *Mahogany & Smooth Skin MODEL SLM/SLS1380 (1-0, 1-2 x 8-0 ) Matching Door: DRM/DRS " " 6.25" 3.313" " 6.25" 8.25" 13.25" 5.25" 8.25" 13.25" 5.25" 95.25" 63.25" 95.25" 63.25" 5.25" 5.25" DY LITE OPENING & GLSS INSERT VILBLE *glass available in Clear IG & LoE 2 3/4 LITE x /4 x 63-1/4 (daylite opening) x /4 x 63-1/4 (daylite opening) 5-1/4 *glass thickness: 3/4 SLO S-16 SIDELITE SLB Product Specifications Plastpro 2000 Inc. ll Rights Reserved. This Plastpro Customer Kit is

175

176 Plastpro Inc W. Century Blvd Los ngeles, C Phone: Fax: plastproinc.com 2014 ll rights reserved part# MKLSB2014