Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient

Size: px

Start display at page:

Download "Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient"

Dale Barber
5 years ago
Views:

1 Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient

The Problem Traffic Control professionals have long recognized

than others. Some signs simply cannot be ignored.

affordable way to retrofit existing signs with additional

do this in such a way that the additional alert system can be

LEDs. A field retrofit Sign Enhancement system that is simple,

The Solution - SignAlert LED Enhancement System LED Rings

255 Levels - Auto-Dimming at night Solar or AC power options

LEDs visible day or night (visible up to 2 miles at night).

(No dirt moved means less permits, and streamlined

permanent bonding tape and/or mechanical fasteners.

Easy retrofit onto new or existing STOP Signs.

Almost any existing sign can be field retrofitted with a

2 The Problem Traffic Control professionals have long recognized that certain sign situations are more critically important than others. Some signs simply cannot be ignored. There has been a growing need in the industry for a simple and affordable way to retrofit existing signs with additional levels of warning for those situations that demand them and to do this in such a way that the additional alert system can be motion activated to conserve power and extend the life of the LEDs. A field retrofit Sign Enhancement system that is simple, affordable,and designed for hassle-free installation. The Solution - SignAlert LED Enhancement System LED Rings field retrofits onto almost any existing sign Very affordable 255 Levels - Auto-Dimming at night Solar or AC power options Motion activation and data collection options High Intensity LEDs visible day or night (visible up to 2 miles at night). Hassle-free installation. (No dirt moved means less permits, and streamlined implementation) LED Flashers face mount on existing signs with permanent bonding tape and/or mechanical fasteners. (5) Year COMPLETE SYSTEM Warranty Create a Visible STOP Sign Easy retrofit onto new or existing STOP Signs. Minimal wire management Fits: 24, 30, 36 & 48 STOP Signs Almost any existing sign can be field retrofitted with a SignAlert Enhancement System. Solar or AC power is available. LED Flasher Ring E Seltice Way Post Falls, Idaho sales@trafficalm.com

Available Controller Options Create a Visible School Zone Basic System Selectable Outputs Unison Single Alternating FLASHING Selectable Flash

Battery / Controller Face Mounted Flashers 20W Solar Panel 5 Year Warranty AC or Solar power options Advanced System Radar Detected Approach to

Flashing will remain ON based on a preprogrammed time limit On-board Mesh-Net allows for communication with other LED Enhanced signs.

System consists of 3 basic components: Face Mounted Flashers 20W Solar Panel Potted and Sealed Battery / Controller Quick installation to minimize

Emergency Flash 5 Year Warranty Advanced System - Available Options Radar Detection AC Power Fire Station Fob Activate TC Connect provides the user a

3 Available Controller Options Create a Visible School Zone Basic System Selectable Outputs Unison Single Alternating FLASHING Selectable Flash Patterns Standard Flash Pulse Flash Rapid Multi-Flash Emergency Flash Bright Pop Flash System Consists of 3 basic components: Potted and Sealed Battery / Controller Face Mounted Flashers 20W Solar Panel 5 Year Warranty AC or Solar power options Advanced System Radar Detected Approach to activate Flash Sequence. Optional Radar Required (PN: M75-SA300-RDR0. Flashing will remain ON based on a preprogrammed time limit On-board Mesh-Net allows for communication with other LED Enhanced signs. Requires 1 or more SignAlert Collaborators (PN: M75-SA300-SQWA) installed on other signs to form a complete network. System consists of 3 basic components: Face Mounted Flashers 20W Solar Panel Potted and Sealed Battery / Controller Quick installation to minimize worker exposure Selectable Outputs Unison Single Alternating Selectable Flash Patterns Standard Flash Rapid Multi-Flash Bright Pop Flash Pulse Flash Emergency Flash 5 Year Warranty Advanced System - Available Options Radar Detection AC Power Fire Station Fob Activate TC Connect provides the user a direct connect for all browser-enabled devices ISO 9001 TraffiCalm Systems 5676 E. Seltice Way, Post Falls, ID sales@trafficalm.com Copyright TraffiCalm Systems, 2015 All Rights Reserved Product descriptions and specifications are subject to change without notice

Push 2 Cross With the design and development of the SA328 RRFB, TraffiCalm Systems has

SignAlert and Push 2 Cross utilize TC Connect WiFi, a WiFi connection platform developed by

connectablity with any browser enabled device.

Uniform Light Distribution Exceeds SAE J595 Class 1 Intensity Meets SAE J578 for

aiming adjustment Side-mounted LEDs for a side visual confirmation Dimensions: 24 x4 x.

sign border Hermetically potted and sealed 3M VHB Tape and optional self-tapping mounting

hours Push 2 Cross SA328 RRFB System Push 2 Cross Flasher Ring System Included Included:

Solar Kit / 10Ah Lithium Iron Battery (4) SA328 Rectangular Rapid Flashing Beacon (2)

To Turn On Warning Lights Sign (4) 24 x12 W16-7 (L-R) ARROW Sign (4) 30 W11-2 Ped Crossing

Solar Kit / 10Ah Lithium Iron Battery (2) 30 Amber LED Flasher Ring (2) To Turn On Warning

4 Push 2 Cross With the design and development of the SA328 RRFB, TraffiCalm Systems has broadened its available MUTCD Compliant options for Push 2 Cross. SignAlert and Push 2 Cross utilize TC Connect WiFi, a WiFi connection platform developed by TraffiCalm Systems requiring NO Internet Connection allowing for immediate WiFi connectablity with any browser enabled device. SA328 RRFB FLASHER RINGS Standard 20 groups of 4 Hi Intensity Amber LEDs for Redundancy and Uniform Light Distribution Exceeds SAE J595 Class 1 Intensity Meets SAE J578 for chromaticity Each of the 80 LEDs have built in 15 degree UV resistant lens Horizontal aiming adjustment Side-mounted LEDs for a side visual confirmation Dimensions: 24 x4 x.85 Fully assembled, one piece construction Complete Edge-Lit Illumination within the 30 sign border Hermetically potted and sealed 3M VHB Tape and optional self-tapping mounting screws create secure adhesion to sign 48 individual Hi Intensity LEDs rated for 100,000 hours Push 2 Cross SA328 RRFB System Push 2 Cross Flasher Ring System Included Included: (1) P2C Controller - 20W Solar Kit / 10Ah Lithium Iron Battery (1) P2C Collaborator - 20W Solar Kit / 10Ah Lithium Iron Battery (4) SA328 Rectangular Rapid Flashing Beacon (2) BDSP-014 BullDog III Push Button (2) PBF9X12-X 9 x12 Push Button Frame (2) 9X12 Push Button To Turn On Warning Lights Sign (4) 24 x12 W16-7 (L-R) ARROW Sign (4) 30 W11-2 Ped Crossing Sign (Yellow or FLYG) Mounting Brackets Manuals TC Connect Software * Post/s not Provided (1) P2C Controller - 20W Solar Kit / 10Ah Lithium Iron Battery (1) P2C Collaborator - 20W Solar Kit / 10Ah Lithium Iron Battery (2) 30 Amber LED Flasher Ring (2) BDSP-014 BullDog III Push Button (2) PBF9X12-X 9 x12 Push Button Frame (2) 9X12 Push Button To Turn On Warning Lights Sign (2) 24 x12 W16-7 (L-R) ARROW Sign (2) 30 W11-2 Ped Crossing Sign (Yellow or FLYG) Mounting Brackets Manuals TC Connect Software * Post/s not Provided (855) TraffiCalm.com Sales@trafficalm.com

Our SignAlert Chevron is designed to give

for use on todays highways that have the

display that outlines the Chevron legend

as a single network and flash sequentially

Installed firmware allows systems operating

Available Options Night Time Only Over Speed

6 Our SignAlert Chevron is designed to give drivers a higher level of visual guidance when approaching curves. TraffiCalm s SignAlert Chevrons are ideal for use on todays highways that have the potential for accidental vehicle lane departures. The sign itself has a high visibility display that outlines the Chevron legend with 80 Hi Intensity Amber LEDs and boasts an effective angularity of 30 Multiple Chevrons in a single location are configured as a single network and flash sequentially in the direction of traffic. Installed firmware allows systems operating on bi-directional roadways to work autonomously and independently of one another. Available Options Night Time Only Over Speed Activated Event Activated Over Height Icy Road Non-Sequential - 24/7 ** Including Battery MUTCD Compliant E Seltice Way Post Falls, Idaho sales@trafficalm.com

Weight with Battery Power Requirements Voltage Charger Communications Battery Reserve Isolation Required Panel Supplied Outputs Detection/Activation Unit - SOLAR 12 lbs.

6VDC, 28W temperature protected Wireless Meshnet integration (device 2 device, +1,000ft range, repeatable signal, configurable network ID, AES-128 Encryption security, DSSS transmissions on

2V MPPV, 21.6V open circuit 2 Chevrons @ 10W each Pole mount adapter Flush Mounted LED Flasher Rings Standard Chevron Legend Size for 24x30 and 30x36 sign size - Reference MUTCD.

7 Weight with Battery Power Requirements Voltage Charger Communications Battery Reserve Isolation Required Panel Supplied Outputs Detection/Activation Unit - SOLAR 12 lbs. Enclosure Rating NEMA 4 Mounting Size 12VDC Nominal MPPT solar charger 14.6VDC, 28W temperature protected Wireless Meshnet integration (device 2 device, +1,000ft range, repeatable signal, configurable network ID, AES-128 Encryption security, DSSS transmissions on selectable channels) 28 standard load (standard load = 25% activations per day with a single flasher ring) with no sunlight 2 hours of good sunlight each standard load 20W, 17.2V MPPV, 21.6V open circuit 2 10W each Pole mount adapter Flush Mounted LED Flasher Rings Standard Chevron Legend Size for 24x30 and 30x36 sign size - Reference MUTCD grade, black powder coated aluminum Mounting Bolt-Mounting directly to sign and post LEDs Power Flash Patterns Dimming Components Battery Amber (590nM): 15 degree cone of view; Rated 100,000 hours; 2.4K CDA/ M^2, Auto Dimming Employed 10V to 18V System Operating Temperature Range 0W standby or OFF (No power required) flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable 255 levels as determined by solar panel illumination or light sensor (AC) -40 C to +74 C -40 C to +60 C TraffiCalm product descriptions and specifications are subject to change without notice. All Rights Reserved Distributed by: E Seltice Way Post Falls, Idaho sales@trafficalm.com

8 SignAlert TM - Enhancement System -- Basic System Specifications Detection/Activation Unit - SOLAR POWER Weight with Battery 12 lbs. Power Requirements Voltage 11VDC to 15VDC (VBATT) Charger MPPT solar charger 14.6VDC, 30W temperature protected Battery LiFePO4 10Ah standard. Autonomy Infinite with 20W panel exposed to low light conditions Panel Supplied 20W, 17.2V MPPV, 21.6V open circuit Outputs Ring 15W Max. Mounting Pole mount adapter Flush Mounted LED Flasher Rings Size Various X.625 available Mounting Outdoor rated Mounting Tape and provisions for optional self drilling / tapping screws. LEDs Red (626nM); 30 degree cone of view; Rated 100,000 hours; 20K CDA/ M^2, Auto Dimming Employed Amber (590nM): 30 degree cone of view; Rated 100,000 hours; 20K CDA/ M^2, Auto Dimming Employed White (Cool White): 30 degree cone of view; Rated 100,000 hours; 25K CDA/ M^2, Auto Dimming Employed Blue (470nM): 30 degree cone of view; Rated 100,000 hours; 9K CDA/ M^2, Auto Dimming Employed Power 10V to 18V 0W standby or OFF (No power required) Flash Patterns flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable Dimming 255 levels as determined by solar panel illumination System Operating Temperature Range System -40 C to +74 C Advanced System - Specifications Detection/Activation Unit - SOLAR POWER Weight with Battery 13 lbs. with 20Ah Battery Power Requirements Voltage 11VDC to 15VDC (VBATT), 240mW in Standby (scanning), 1.8W avg in activated mode (varies by flasher model) Charger MPPT solar charger 14.6 VDC, 30W temperature protected Battery LiFeP04 10Ah Standard Autonomy Infinite with 20W panel exposed to low light conditions Panel Supplied 20W, 17.2V MPPV, 21.6V open circuit standard. Optional 60W panels available. Enclosure Rating NEMA 4 Face Mounted LED Flasher Rings Size Various X.625 available LEDs Reference Basic 24-7 System Specifications above. Power 10V to 18V Flash Patterns flashes per minute; 50% Duty Cycle. Additional alternative flash patterns available and are user programmable Dimming 255 levels as determined by solar panel illumination System Operating Temperature Range System -40 Degree C to 74 degree C TraffiCalm product descriptions and specifications are subject to change without notice. All Rights Reserved Distributed by:

Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient

Safety... Sometimes it can t be dependent on reflectivity alone. ATSSA s Proud Recipient The Problem Traffic Control professionals have long recognized that certain sign situations are more critically