Water Weights Europe. Sales product catalog

Transcription

1 Water Weights Europe Sales product catalog

2 Sales Product Catalog - Contents WATER WEIGHTS Bags / Test Weights WATER WEIGHTS Standard water filled proof load bags Page 4 WATER WEIGHTS Lifeboat & Gangway Testing Bags Page 5 WATER WEIGHTS Platform, Bridge & Floor Testing Page 6 WATER WEIGHTS safety facts Page 7 Load & Force Measurement LE Load Link Series (load cells 5t-300t) Page 10 SL Load Measuring Shackle (load cells 12t-1000t) Page 11 GL112 Telemetry Load Display Page 12 Accessories - Transport Cases Page 13 Accessories - Shackles Page 13 Accessories - Spare Parts Page 13 Custom Systems Page 14 Other Information Water Weights General Terms & conditions Page 16 Contact & Route to Water Weights Europe Page 17 Page 02

3

4 Sales Product Catalo g - WATER WEIGHTS Bags / Test Weights WATER WEIGHTS Standard Proof Load Bags WATER WEIGHTS water filled proof load bags are a well proven method for testing cranes, beams, davits or any lifting equipment. They are used for marine as well as industrial and engineering applications. Fifteen standard types of WATER WEIGHTS proof load bags between 1 and 55 metric tonnes are avaiable in our standard range. Combining different capacities and specially designed spreaders, any load can be applied. Specialist "low headroom" bags (marked with L in the table below) are available for testing where headroom is restricted. These bags are designed for use of only one bag at each lifting point. Standard shaped bags (marked with S in the table below) have the shape of a rain drop, which is the most natural shape for a flexible water container. This specific shape makes combinations of three bags from a single point possible. Technical data Branding: WATER WEIGHTS Skin material: PVC coated, Woven Polyester Fibre Tensile strength: N/50mm Tear resistance: 1500 N Skin thickness: 1650 GSM Bursting pressure: 355 PSI Safety factor: NEL Certified 6:1 (55t 4:1) Proof loaded: All bags 2:1 Filling connection: On Request Type Capacity Size when empty Length Size when filled Weight (metric tonne) (packed: lxbxh) (empty) (Dia x Height) (empty) BS 01 S x kg BS 02 S x kg BS 02 L x kg BS 03 S x kg BS 03 L x kg BS 05 S x kg BS 05 L x kg BS 10 S x kg BS 12 L x kg 5 BS 12 L x kg BS 15 L x kg BS 20 S x kg BS 25 S x kg BS 35 S x kg BS 55 S x kg 9,0 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0 Height in Meters Note: If bags are filled to less than their capacity they will increase in length and reduce in diameter. 2,0 1,0 15L 12 5 L 12L 5L 3L 2L 1s 0,0 5s 2s 10s 1,0 55s 35s 25s 20s Radius in Meters 2,0 Page 04

5 Sales Product Catalo g - WATER WEIGHTS Bags / Test Weights WATER WEIGHTS Lifeboat & Gangway Test Bags WATER WEIGHTS lifeboat testing bags can be used to apply an evenly distributed load to a lifeboat, gangway, or any other object that has to be proof loaded. These specially designed Life boat testing bags of 100kg or 375kg each can be supplied as a complete life boat/gangway testing set. A remote system with a manifold and filling hoses, allows proof load testing to be conducted safely, without entering the craft in the dangerous overload situation. Larger gangways and small bridges can be tested with our 1 tonne WATER WEIGHTS Matress bags (MB1000). These bags offer much flexibility by their shape, and higher capacities can be achieved. Technical data Branding: Material: Material thickness: Weight Tolerance: Coupling: Extras: WATER WEIGHTS PVC coated Polyester Fibre 1650 GSM ±2% of filled weight Standard 1 Camlock F Pressure relief valve, anchor tabs Type Size when empty Size when filled Weight Capacity (packed set: lxbxh) (length x width x height) (each empty) (each) LB x 100 x x 28 6 kg 100 kg LB x 100 x x kg 375 kg MB x 100 x x 130 x kg 1000 kg Note: Above are the standard sizes. Other shapes and capacities are available on request. Bags can be purchased as a complete kit including accessories, or as single units. Page 05

6 Sales Product Catalo g - WATER WEIGHTS Bags / Test Weights WATER WEIGHTS Platform, Bridge & Floor Testing Water Weights provide specialist products and services for load testing of all kinds of structures, platforms, bridges, floors, gangways, loading ramps and decks. Easy handling and positioning on site and low carriage costs are some of the advantages of this testing system. As gradual application of the test load can more easily be achieved with water weights than solid weights. The amount of water inside the bags is measured with a calibrated flow track meter. Water Weights have tested several RO-RO ferry ramps, arranged ballasting arrangements for ships, tested floors during building renovations and tested several elevator systems and bridges. Technical data Branding: Skin material: Tensile strength: Tear resistance: Skin thickness: Bursting pressure: Filling connection: WATER WEIGHTS PVC coated, Woven Polyester Fibre N/50mm 1500 N 1650 GSM 355 PSI On Request 3,0 Height in Meters 2,0 FD25 1,0 0,0 FT FT MB 1000 FD35 FD100 FT16 0,0 1,0 2,0 3,0 4,0 5,0 6,0 Length in Meters 7,0 8,0 Type Capacity Size when empty Size when filled Weight (packed: lxbxh) (Length x Width x Height) (empty) MB t. 50 x 40 x x 130 x 30* 22 kg FT t. 75 x 80 x x 250 x 95* 20 kg FT t. 100 x 80 x x 280 x 90* 40 kg FT16 16 t. 120 x 90 x x 200 x 100* 50 kg FD25 25 t. 150 x 90 x x 415 x kg FD35 35 t. 150 x 100 x x kg FD t. 280 x 130 x x 840 x kg Note: Bags marked with * are our totally enclosed bags (Matress bags or Flexitainers, MB, FT), other bags are open top Flexidams (FD). Note: Many other versions, shapes or sizes are available on request. Please contact us for possibilities. Page 06

7 Sales Product Catalo g - WATER WEIGHTS Bags / Test Weights WATER WEIGHTS Safety Facts 1. In the majority of countries proof load testing of lifting equipment is a mandatory requirement. Such requirements are legal minimums and many companies or industries choose to set more rigorous standards. 2. Proof load testing is an essential part of any inspection, repair and maintenance programme for lifting equipment. In situations where live load testing is not specifically mandated, it is still an essential element of safe maintenance and advisable for liability purposes. 3. Successful proof load testing instills confidence in customer, operator and owner. 4. The use of WATER WEIGHTS water filled proof load bags for load testing all kinds of lifting equipment is recognised world-wide as a safe, efficient and cost effective system. 5. WATER WEIGHTS water filled proof load bags have been specifically designed and physically proof load tested to verify that their operational integrity exceeds UK Health and Safety Executive Standards. 6. Water Weights have, in line with Lifting Equipment Engineering Association (LEEA) Guidance Document 051, a physical load test programme. All equipment has a proven and certified factor of safety in excess of 6:1 and each bag is physically proof load tested to a minimum of twice its rated capacity. Page Gradual application of load under test conditions is essential. This is more easily achieved using WATER WEIGHTS water filled proof load bags than traditional solid weights. 8. In the event of failure of the equipment under test, consequential loss or damage is usually limited and often prevented when using WATER WEIGHTS water filled proof load bags. 9. There have been several serious accidents throughout the world during proof load testing involving sub-standard water containers which were simply not designed for the physical demands of proof load testing. Water Weights strongly advise potential users of 'water containers' to request evidence of physical proof load test certificates from a recognised Government body or testing authority, proving that the equipment meets with the minimum factor of safety legally required. 10. WATER WEIGHTS water filled proof load bags fully meet the essential safety requirement of the European Machinery Directive and are fully certified in accordance with LEEA Guidance Document 051 and the America Bureau of Shipping (ABS) Product Design Assessment. Water Weights is approved toiso 9001:2008.

8

9

10 Sales Product Catalog - Load & Force measurement LE Load Link Series The LE load link series is the base model within our load cell range. A range from 5 up to 300 metric tonne is available. The Water Weights LE series use microprocessor based electronics, providing excellent power management to ensure maximum battery life. Load cell will switch from active to eco mode (standard one-third of the sample speed) if no changes in load are detected to save battery power. Specific algorithms within the LE software and advanced measurement filtering ensure best linearity. Configuration and calibration can be performed by your supplier. The LE load link is standard available as a radio telemetry version, however a cabled version is available on request. The load link will come as a set together with the GL112 handheld telemetry display (see page 13 of our sales product catalog). Link ID selection allow multiple load cells within the same area. Technical Details Safety factor 5:1 Proof loaded 150% Max. overload 150% Ultimate overload 300% Enclosure / IP rating IP66 Material Aluminium Accuracy 0,5% Sample rate (active) 1 Hz (0,25Hz - 8Hz on request) Sample rate (eco) 0,3 Hz (0,08Hz - 3Hz on request) Transmitter range > 150 mtr Battery life (active) Battery life (eco) Battery type (<50t) Battery type (>50t) Temp Range Transmitter Freq. Optional on request > 200 hrs (20 C) > 500 hrs (20 C) 1x AA 2x AA -10 C / +70 C 434 MHz IP67, IP68, ATEX Stainless Steel body C-type batteries Custom Frequency B C Capacity Model A B C D E Weight 5 ton LE05TA kg 12 ton LE12TA kg 17 ton LE17TA kg 25 ton LE25TA kg 35 ton LE35TA kg 50 ton LE50TA kg 85 ton LE85TA kg 100 ton LE100TA kg 120 ton LE120TA kg 150 ton LE150TA kg 200 ton LE200TA kg 250 ton LE250TA kg 300 ton LE300TA kg A D E Page 10

11 Sales Product Catalog - Load & Force measurement SL Load Measuring Shackle This type of load cell provide a robust and flexible solution for load measuring. Capacities from 12t up to and over 1000t could be achieved. The Water Weights SL telemetry load shackles are based on a standard bow shackle, with a load measuring system built into its pin. The design and body is ultra-rugged, ensuring exceptional protection from mechanical damage. The system uses the LE microprocessor electronics and LE software, (previous page) providing excellent power management and advanced linearity control. Configuration / calibration can be performed by your supplier. The SL load shackles are standard available as radio telemetry units, however a cabled version is available on request. The load link will come as a set together with the GL112 handheld telemetry display (see page 13 of our sales product catalog). Link ID selection allow multiple load cells within the same area. Technical Details Safety factor 5:1 Proof loaded 150% Max. overload 150% Ultimate overload 300% Enclosure / IP rating IP66 Material High tensile steel Accuracy 0,5% Sample rate (active) 1 Hz (0,25Hz - 8Hz on request) Sample rate (eco) 0,3 Hz (0,08Hz - 3Hz on request) Transmitter range > 150 mtr Battery life (active) Battery life (eco) Battery type Temp Range Transmitter Freq. Optional on request > 200 hrs (20 C) > 500 hrs (20 C) 1x AA, 2x AA, 2xC, 2x D (depending on capacity) -10 C / +70 C 434 MHz IP67, IP68, ATEX Stainless Steel body Custom Frequency Custom design Capacity Model A B C D Weight 12 ton SL12TA kg 17 ton SL17TA kg 25 ton SL25TA kg 35 ton SL35TA kg 50 ton SL50TA kg 85 ton SL85TA kg 120 ton SL120TA kg 150 ton SL150TA kg 200 ton SL200TA kg 250 ton SL250TA kg A D Page t t or bigger? Dimensions and details on request If you want an existing shackle conversion? Ask for possibilities. B C

12 Sales Product Catalog - Load & Force measurement GL112 telemetry load display The small handheld GL112 digital telemetry load display comes with all LE and SL load measuring devices. Its size and weight makes it comfortable to operate. The Water Weights GL112 display is an easy to use, lightweight radio telemetry display. The unit will operate with any LE-based measuring system and provides live readout, battery indication for both the load cell and the display, tare functionality and measurement unit selection. Link ID selection allow use of multiple load cells within the same area, as well as using one display for multiple devices (not simultaneously). As all calibration is set in the load cell, choosing another load cell would not affect the readout. Optional is a signal output connection (either RS232 serial or analog) allowing you to monitor, record or analyse the loadcell readout in your own system, laptop, PC or printer. Technical Details Dimensions Weight Enclosure / IP rating Display Digit type Units Keypad Receiver Freq. Receiver range Temp Range Battery type Recommended Batt. Battery life Charging time 150 x 85 x 28 mm 280 gramme IP65 8 digit LCD Alphanumeric, 9 mm Metric ton, US ton, LBS 6 keys tactile 434 MHz > 150 mtr -10 C / +70 C 2x AA Rechargable NiMH > 50 hrs (20 C) < 10 hrs (depending on Battery type) Comes with Included accessories Optional on request All LE and SL telemetry systems Protection case External Antenna Power supply / charger Data output cable (RS232 only) IP67, IP68, ATEX Custom Frequency Serial RS232 output Analog voltage output Portable data logger RS232 Printer Page 12

13 Sales Product Catalog - Load & Force measurement Accessories - Transport Cases For transport and storage of the load measuring equipment we recommend to use our heavy duty transport cases. These cases are made of ultra-high impact ABS and are shock, dust and (partly) water proof. The cases are supplied with soft foam insert (for light weight apparatus) or padded dividers (heavy equipment). Accessories like document pouches are also available. Type Inside (mm) Outside (mm) Example what it can store (no guarantee) x 233 x x 295 x 169 GL112 display, antenna detached, charger, A5 documents. T x 260 x x 325 x 115 GL112 display, antenna attached, charger, A4 documents x 301 x x 365 x 188 LE05-LE25 load link, GL112, charger, A4 documents x 351 x x 419 x 215 LE05-LE12 load link, GL112, charger, A4 docs & pair of shackles. LE25-LE85 load link, GL112, charger, A4 documents. SL12-SL25 load shackle, GL112, charger, A4 documents x 357 x x 428 x 263 LE17-LE35 load link, GL112, charger, A4 docs & pair of shackles. (this is a trolley case with telescopic handle) LE85-LE150 load link,gl112, charger, A4 documents. SL25 -SL35 load shackle, GL112, charger, A4 documents. All kinds of heavier equipment and accessories. Accessories - Shackles However you are free to use your own shackles, Water Weights can supply the full range of green pin shackles (or other brands if required) to be used with your load cell, or in an advanced water bag rigging. Please contact our office and ask for possibilities. Accessories - Spare Parts In case some of the parts get lost or damaged over time, we can supply spare parts for the load measuring units. Below is a list of the most common parts, but more are available on request. 1. LE Battery caps 2. LE telemetry antenna 3. GL telemetry antenna 4. GL protective cover 5. GL charger 6. RS232 cable Page 13

14 Sales Product Catalog - Load & Force measurement Custom Systems A wide range of other load measurement & data processing systems can be supplied, specially designed to your requirements. Water Weights does supply systems to all industries: Offshore, Construction, Cranes, Oil & Gas, Marine & many more. A wide variety of load monitoring systems is available. Here below is a brief overview of possible products. - Custom load pins - Compression load cell systems (1) - Tension load sensors - Running line tension meters (2) - Cable speed & payout monitoring - Jack-up measuring systems 1 - Load monitoring instruments (3) - Handheld and integrated load monitoring - LCD, LED and full color displays - Data logging systems - RS232 serial data devices - Multiple sensors on single display - Center of gravity (CoG) measurement -Other custom weighing systems (4) 2 Don t hesitate to ask for possibilities. We are willing to discuss and select the best solution for your project. 3 D D 4 Page 14

15

16 Sales Product Catalog - Other Information General Terms and Conditions Article 1: General Provisions 1. These general conditions shall apply to all offers made by us and/or to us, to all agreements concluded with us, including the execution thereof, and to all other contracts with us, without any exclusions. With these conditions the application of any general conditions applied by the lessee, under whatever name, shall be expressly rejected. 2. Any departures from the conditions below can only be accepted when concluded in writing and shall only apply after our express acknowledgement in writing to the lessee. Article 2: Definitions 1. a. Lessor: Water Weights Europe B.V; b. Lessee: The legal and/or natural person hiring the installation, including representatives; c. Installation: The installation, machine, requisites, and parts, which Water Weights Europe B.V. hires to the lessor; d.a week shall consist of seven consecutive days. Article 3: Good condition 1. By signing the delivery receipt the lessee shall declare to have received the hired installation in good condition, and that the installation displays no signs of damages. Article 4: Application of the installation 1. The lessee shall use the installation expertly and for the intended purpose for which the installation is equipped, and in accordance with any applicable laws, regulations, provisions, etc. 2. The lessee shall not be allowed to alienate the object, nor pawn or encumber it, nor to hire, let or otherwise put it at someone else s disposal for money or for free, or to pass the rights and duties ensuing from this agreement to third parties. 3. The lessee shall not move the installation or have it moved outside the location known to the lessor without the lessor s written consent. 4. The lessee shall not modify the installation or add to it, nor have it modified or expanded. 5. The lessor shall have the right to transfer the installation and this agreement to a third party designated by the lessor. Article 5: Repairs and Maintenance 1. The lessee shall be obliged to clean the installation regularly and to keep it in good condition. 2. Cleaning and maintenance costs shall be borne by the lessee, subject to the provisions of article 9 paragraph 4. Article 6: Liability and Indemnity 1. The lessee shall be liable for any damages, incidental and accidental to the installation, irrespective of whether these are caused by fault of the lessee or third parties, or by force majeure. 2. In the course of the term of hire the lessee shall bear all risks of the installation. The lessor shall not be liable for any faults or unfitness of the installation, any defects within or of the installation or any direct or consequential damages caused by the installation or by any shortcomings of the installation. 3. The lessor shall indemnify the lessor against any claims from third parties with respect to damages resulting from any faults or unfitness of the installation, any defects or shortcomings within or of the installation. Article 7: Insurance Payments or Payments of Damages 1. The lessee shall at their own costs insure and keep insured the risks pertaining to the installation and he shall do so on an all-risks policy on extensive terms. 2. Any claim which the lessee may receive on account of damages to and/or caused by the installation to third parties shall be pledged by the lessee, when necessary in advance, by signing the agreement with the lessor, just as the lessor shall accept this pledge by signing the contract. On his own account the lessee shall provide the lessor with all data concerning any claim(s) and he will co-operate to formalise this pledge without any reservations by signing a so-called pledge bond. The lessee shall also authorize the lessor to perform everything necessary in order to achieve this pledge. The insurance payment that the lessor will receive shall be used in the first place to pay for any repairs and other expenses to be paid by the lessor and ensuing from or caused by the incident, while the remainder of the payments shall be deducted from the amount the lessor still may claim from the lessee with respect to this agreement. If the insurance company has deducted a sum from the reimbursement on account of the owner s risk or the lessee s liability, the lessor shall charge the sum of this deduction to the lessee s account. 3. The lessee shall be liable towards the lessor for the full replacement value of any part lost or stolen and for the full repair costs. Full lease instalments shall remain due for as long as the installation has not yet been fully repaired. Article 8: Terms of hire 1. The installation shall be deemed to have been hired from the time the installation leaves the lessor s premises until the time it is returned and unloaded. 2. Hire cancellation by telephone shall be confirmed by the attribution of an off-hire number (end of hire). Following this, the lessee shall 3. confirm in writing when the object may be picked up. The sole fact that the installation for whatever reason and by whatever cause cannot be used, shall not affect the lessee s obligation to pay, subject to the provisions of article 9 paragraph The lessor shall not be liable for any delay in the delivery. The dates provided by him in this must be considered approximate dates. Article 9: Defects 1. The lessee shall inform the lessor at once in case of loss or damages to the installation. 2. When the installation has been hired without an operator appointed by the lessor, the lessee shall immediately inform the lessor by fax or by telegram of any defect or malfunctioning of any part of the installation. 3. Any rights in the form of lower rent - for the period of time that the installation is defect, as provided for in the next paragraph, can only be considered as from the date and time the fax or telegram was sent. 4. The time necessary for repairs to and/or replacement of the installation shall be deducted from the rent, provided the defect is caused by normal wear, this to be decided by the lessor, and through no fault of the lessee. In that case the lessor shall bear the costs of the replacement, but he shall not be liable for any consequential damages suffered or to be suffered by the lessee as a result of the defect (stagnation damages etc.). 5. If necessary, a test certificate shall be provided with every shipment. Article 10: Payments 1. Payments should be made weekly. 2. The lessee shall never have the right to make cuts on or crediting to the payments. 3. When any payment is overdue the lessee shall owe the lessor an interest of 1.5 per cent per month for the payments still due starting from the date due up to and including the date of the payment. In case of delays of payments the lessor will first deduct payments made by the lessee from costs and interest due, and then assigned to the oldest term due, and so forth. The lessor also has the right in case the lessee is in default to raise the amount due with collection charges, legal costs and other recovery costs, including the expenses of the lessor s solicitor and other extrajudicial costs. 4. The lessor s accounts shall serve as full evidence with respect to the amount due to the lessor by the lessee, subject to counter-evidence from the lessee. Article 11: Technical Inspection 1. At the request of the lessor the lessee shall have the installation available for inspection or give the lessor the opportunity to inspect the installation and/or take it back. The lessee shall authorize the lessor or the persons appointed by the latter to enter the installation site. 2. If the lessee does not meet the obligation as referred to in article 5, the lessor shall have the right without prejudice to any right ensuing from this agreement to reclaim the installation and to enter (or authorize someone to enter) the installation site. The lessee shall be accountable for all expenses the lessor will have in connection with the reclamation of the installation, including its transport and the costs of any overdue maintenance. Article 12: Attachment and Third Party Measures 1. In case third parties claim any rights or exert any measures with respect to the installation, the lessee shall immediately inform them of the property rights of the lessor. 2. The lessor shall be allowed take all measures considered necessary by him in order to protect his rights also in the name of the lessee. The costs of these measures shall be borne by the lessee, unless the lessor is accountable for the occasion of the measures. Article 13: Test 1. If the installation is used to perform a test, this shall be under the sole responsibility and liability of the lessee. The lessee shall be liable for all persons assigned by the lessor to start up and/or operate the installation or hired as such by the lessee. The lessor shall never be liable in such a case for damages ensuing from actions or negligence of these persons. Article 14: Final Provisions 1. The provisions of this contract shall be governed by the laws of the Netherlands exclusively. Any disputes shall be settled by the competent court of the city in which the lessor is situated, on the understanding that the lessor has the right without the above condition to put the dispute to a judge who is competent to learn from the dispute. Page 16

17 Sales Product Catalog - Other Information Contact information Postal address: Leeghwaterstraat 23A, 3364 AE Sliedrecht, The Netherlands Visiting / Collecting Goods: The entrance of our office is located in the Vierlinghstraat. Tel: +31 (0) Fax: +31 (0) info@waterweights.nl Web: VATno: NL B01 CoC/KvK: Route to Water Weights From Utrecht: Take A27 to Gorinchem and than A15 dir. Rotterdam On highway A15 take exit 24 (Sliedrecht-West) At the end of the exit, turn right Follow the road for approx. 2 km and than turn right (Enter industrial estate, Calandstraat) Immediately (60m) turn right (Lelystraat) After approx. 100m turn left (Vierlinghstraat) The entrance to our office/warehouse can be found in the Vierlinghstraat. From Rotterdam: Take A15 direction Gorinchem/Nijmegen On highway A15 take exit 24 (Sliedrecht-West) At the end of the exit, turn left At the traffic lights turn left (under highway viaduct) Follow the road for approx. 2 km and than turn right (Enter industrial estate, Calandstraat) Immediately (60m) turn right (Lelystraat) After approx. 100m turn left (Vierlinghstraat) The entrance to our office/warehouse can be found in the Vierlinghstraat. Page 17

18