Whether powering CCTV cameras, video intercoms, locks or other device types, Power over Ethernet battery standby is available off the shelf.

Transcription

1 Power over Ethernet Midspan power supply guide SecurePoE Power over Ethernet for security Dantech is pleased to offer a range of Power over Ethernet midspan power injectors with 30W per channel capability, tailored for secure installation. All SecurePoE products feature a secure enclosure with all connections inside. They include status monitoring and tamper contacts that can be used in a variety of ways to increase system security. Gigabit and 10/100 bandwidth products are available in various output configurations and mounting packages. SecurePoE products use British designed high efficiency and high reliability electronics. They are manufactured and tested in Great Britain. Products are compliant with IEEE 802.3:2012 (802.3at, 802.3af) and designed for use with all compatible load devices. MidspanUPS VRLA battery backed PoE systems Designed for reliable battery backup of PoE devices, our SecurePoE range includes battery maintained MidspanUPS models that provide continuous PoE power when your mains supply fails. Using high reliability Yuasa standby batteries, our MidspanUPS products come with batteries included. These take the form of replaceable customised battery packs. Different sizes are available to cater for different standby time requirements and we offer guaranteed replacement battery pack availability. Whether powering CCTV cameras, video intercoms, locks or other device types, Power over Ethernet battery standby is available off the shelf. Find out more at Call Fax sales@dantech.uk.com

2 Unique product benefits The availability of a secure midspan power option for universal locations allows: Secure remote installation with less equipment and fewer mains terminations. Addition of power to ethernet, converted fibre optic and converted coaxial cabling. Direct engineer access to connected PoE devices allowing faster system configuration and maintenance without specialist test equipment. Reliable power with increased security and redundancy for remote locations, including CCTV cameras with on board recording edge storage. Product applications With the increasing use of Power over Ethernet technology in the security industry, SecurePoE products are suited for use in a variety of applications, including: CCTV Intercoms systems Access Control VOIP Telecoms Secure System Integration IEEE 802.3:2012 compatible PoE applications Did you know? All of our battery maintained SecurePoE products are sold with customised YUASA battery packs to suit. Security with flexibility SecurePoE is designed with consideration for ease of installation in any environment. Whether indoor or outdoor, wall mounting or 19 rack mounting, there is a solution designed to fit the location that your system demands. Most versions come equipped with innovative fast cable entry options to save installer time.

3 Indoor wall mounting SecurePoE Dimensions (H x W x D) Battery capacity Battery pack code PoE Ports Dantech code 10/100 ( 10BASET, 100BASETX ) 295 x 220 x 62mm 330 x 250 x 125mm ü 1.2Ah DA1001INBATT 500 x 400 x 155mm ü 7Ah DA1007INBATT 500 x 400 x 155mm ü 10Ah DA1010INBATT Gigabit (10BASET, 100BASETX & 1000BASET ) 295 x 220 x 62mm 330 x 250 x 125mm ü 1.2Ah DA1001INBATT 500 x 400 x 155mm ü 7Ah DA1007INBATT 500 x 400 x 155mm ü 10Ah DA1010INBATT DA1000IN1 DA1000IN2 DA1000IN4 DA1001IN1 DA1001IN2 DA1001IN4 DA1007IN1 DA1007IN2 DA1007IN4 DA1010IN1 DA1010IN2 DA1010IN4 DA1000IN1G DA1000IN2G DA1000IN4G DA1001IN1G DA1001IN1G DA1001IN4G DA1007IN1G DA1007IN2G DA1007IN4G DA1010IN1G DA1010IN2G DA1010IN4G Features: Indoor, wall mount enclosures DA1000IN, DA1001IN, DA1007IN & DA1010IN Midspan power injector with 1, 2 or 4 load output ports 30W of load power availability per port, to IEEE 802.3: V AC, 4763Hz universal mains input Ultra high efficiency operation up to 96% (tested with 120W load) Safe power supply design System power status LED & monitoring contacts Individual port power status LEDs and monitoring contacts Monitoring relay contacts can be used for analogue or network interface (e.g. AVIs, alarm logs, device alarm inputs; or triggering ancillary equipment) Innovative fast entry cable system Additional cable entry knockouts Secure steel enclosure DA1007IN & DA1010IN versions include space for equipment mounting (e.g. switch, fibre optic media converter etc. 200h x 160w x 140d mm available ) Lid tamper switch Fully backward compatible with automatic load class detection Designed for ease of fitting and high reliability Features: MidspanUPS battery maintained units DA1001IN, DA1007IN & DA1010IN Customised Yuasa battery pack included Battery packs are fastfit and replaceable Available with 1.2Ah, 7Ah & 10Ah battery pack capacities 7Ah & 10Ah battery packs feature carry handles Automatic battery low voltage deep discharge protection Mains fail and low battery relay monitoring contacts Guaranteed replacement battery pack availability

4 Exterior wall mounting SecurePoE Dimensions (H x W x D) Battery capacity Battery pack code PoE Ports Dantech code 10/100 ( 10BASET, 100BASETX ) 280 x 190 x 130mm 340 x 280 x 130mm ü 1.2Ah DA1001EXBATT 500 x 400 x 200mm ü 7Ah DA1007EXBATT 500 x 400 x 200mm ü 10Ah DA1010EXBATT Gigabit (10BASET, 100BASETX & 1000BASET ) 280 x 190 x 130mm 340 x 280 x 130mm ü 1.2Ah DA1001EXBATT 500 x 400 x 200mm ü 7Ah DA1007EXBATT 500 x 400 x 200mm ü 10Ah DA1010EXBATT DA1000EX1 DA1000EX2 DA1000EX4 DA1001EX1 DA1001EX2 DA1001EX4 DA1007EX1 DA1007EX2 DA1007EX4 DA1010EX1 DA1010EX2 DA1010EX4 DA1000EX1G DA1000EX2G DA1000EX4G DA1001EX1G DA1001EX2G DA1001EX4G DA1007EX1G DA1007EX2G DA1007EX4G DA1010EX1G DA1010EX2G DA1010EX4G Features: Exterior enclosure range DA1000EX, DA1001EX, DA1007EX & DA1010EX Weather resistant IP66 rated enclosure Midspan power injector with 1, 2 or 4 load output ports 30W of load power availability per port, to IEEE 802.3: V AC, 4763Hz universal mains input Ultra high efficiency operation up to 96% (tested with 120W load) Safe power supply design System power status LED & monitoring contacts Individual port power status LEDs and monitoring contacts Monitoring relay contacts can be used for analogue or network interface (e.g. AVIs, alarm logs, device alarm inputs; or triggering ancillary equipment ) Innovative fast entry cable system DA1000EX & DA1001EX are housed in toughened ABS cases DA1007EX & DA1010EX use a robust steel Sarel enclosure (they include a 4mm thick aluminium frame and battery pack shelf) DA1007EX & DA1010EX versions include space for equipment mounting (e.g. Switch, fibre optic media converter etc. 200h x 160w x 180d mm available) Lid tamper switch Fully backward compatible with automatic load class detection Designed for ease of fitting and high reliability Features: Exterior MidspanUPS battery maintained units DA1001EX, DA1007EX & DA1010EX Customised Yuasa battery pack included Battery packs are fastfit and replaceable Available with 1.2Ah, 7Ah & 10Ah battery pack capacities 7Ah & 10Ah battery packs feature carry handles Automatic battery low voltage deep discharge protection Mains fail and low battery relay monitoring contacts Gas permeable breather valve fitted for battery safety Guaranteed replacement battery pack availability

5 19 Rack mounting SecurePoE Dimensions (H x W x D) PoE Ports Battery capacity Dantech code 10/100 ( 10BASET, 100BASETX ) 1U x 19" x 15" ( 44 x 478 x 380mm) (Excluding remote battery packs) ü 1.2Ah ü 7Ah ü 10Ah Replacement battery pack(s) Qty Part code Dimensions (H x W x D) DA1000RM4 DA1000RM8 DA1001RM4 DA1001RM8 DA1007RM4 DA1007RM8 DA1010RM4 DA1010RM8 1 of DA1001RMBATT (210 x 100 x 145mm) 2 of DA1001RMBATT 1 of DA1007RMBATT (290 x 160 x 200mm) 2 of DA1007RMBATT 1 of DA1010RMBATT (290 x 160 x 200mm) 2 of DA1010RMBATT Gigabit (10BASET, 100BASETX & 1000BASET ) 1U x 19" x 15" ( 44 x 478 x 380mm) (Excluding remote battery packs) ü 1.2Ah ü 7Ah ü 10Ah DA1000RM4G DA1000RM8G DA1001RM4G DA1001RM8G DA1007RM4G DA1007RM8G DA1010RM4G DA1010RM8G 1 of DA1001RMBATT (210 x 100 x 145mm) 2 of DA1001RMBATT 1 of DA1007RMBATT (290 x 160 x 200mm) 2 of DA1007RMBATT 1 of DA1010RMBATT (290 x 160 x 200mm) 2 of DA1010RMBATT 19 Rack mounting DA1000RM, DA1001RM, DA1007RM & DA1010RM Midspan power injector with 4 or 8 load output ports 30W of load power availability per port, to IEEE 802.3: V AC, 4763Hz universal mains input Ultra high efficiency operation up to 96% (tested with 120W load) Safe power supply design System power status LED & monitoring contacts Individual port power status LEDs and monitoring contacts Monitoring relay contacts can be used for analogue or network interface (e.g. AVIs, alarm logs, device alarm inputs; or triggering ancillary equipment) Slim 1U profile steel enclosure Removable front cover with tamper protection Fully backward compatible with automatic load class detection Designed for ease of fitting and high reliability MidspanUPS battery maintained units DA1001RM DA1007RM & DA1010RM Customised Yuasa battery pack(s) included Battery packs are remote and are supplied with plugin lead (designed for shelf or floor mounting, while saving rack space) Available with 1.2Ah, 7Ah & 10Ah battery pack capacities Battery packs feature carry handles Automatic battery low voltage deep discharge protection Mains fail and low battery relay monitoring contacts Guaranteed replacement battery pack availability Four port versions use one battery pack (included) Eight port versions use two battery packs (included) (use standby time figures for four port versions)

6 Product code index Standard (Nonbattery) Indoor wall mount Exterior wall mount 19 Rackmount Port DA1000IN1 DA1000EX1 Ports DA1000IN2 DA1000EX2 Ports DA1000IN4 DA1000EX4 DA1000RM4 Ports DA1000RM8 Gigabit port DA1000IN1G DA1000EX1G Gigabit ports DA1000IN2G DA1000EX2G Gigabit ports DA1000IN4G DA1000EX4G DA1000RM4G Gigabit ports DA1000RM8G Battery maintained 1.2Ah Port DA1001IN1 DA1001EX1 Ports DA1001IN2 DA1001EX2 Ports DA1001IN4 DA1001EX4 DA1001RM4 Ports DA1001RM8 Gigabit port DA1001IN1G DA1001EX1G Gigabit ports DA1001IN2G DA1001EX2G Gigabit ports DA1001IN 4G DA1001EX4G DA1001RM4G Gigabit ports DA1001RM8G Replacement battery pack part code: DA1001INBATT DA1001EXBATT DA1001RMBATT Battery maintained 7Ah Port DA1007IN1 DA1007EX1 Ports DA1007IN2 DA1007EX2 Ports DA1007IN4 DA1007EX4 DA1007RM4 Ports DA1007RM8 Port Gigabit DA1007IN1G DA1007EX1G Ports Gigabit DA1007IN2G DA1007EX2G Ports Gigabit DA1007IN4G DA1007EX4G DA1007RM4G Ports Gigabit DA1007RM8G Replacement battery pack part code: DA1007INBATT DA1007EXBATT DA1007RMBATT Battery maintained 10Ah Port DA1010IN1 DA1010EX1 Ports DA1010IN2 DA1010EX2 Ports DA1010IN4 DA1010EX4 DA1010RM4 Ports DA1010RM8 Port Gigabit DA1010IN1G DA1010EX1G Ports Gigabit DA1010IN2G DA1010EX2G Ports Gigabit DA1010IN4G DA1010EX4G DA1010RM4G Ports Gigabit DA1010RM8G Replacement battery pack part code: DA1010INBATT DA1010EXBATT DA1010RMBATT Product selection 1. Select product mounting type: Indoor wall mounting = IN Exterior wall mounting = EX 19 rack mounting = RM 2. Select number of 30W PoE ports required 3. If battery standby is required, simply select the appropriate battery pack capacity from the table. (Use the power ratings for your PoE load devices to determine your total system load requirement.) Battery capacity Output load 1.2Ah 7Ah 10Ah 12W 4 Hours 30 Hours 44 Hours 25W 1.75 Hours 14.5 Hours 20 Hours 50W 40 Minutes 6.5 Hours 9.5 Hours 75W 23 Minutes 4 Hours 6 Hours 100W 14 Minutes 2.75 Hours 4 Hours Estimated system standby times The enclosed information is believed to be correct. Information may change without notice due to product improvement. Users should ensure that the product is suitable for their use. E&OE. Registered Proprietor: Benham (General Engineers) Ltd (No ) Registered at 3 Galliford Road Industrial Estate, Heybridge, Maldon, Essex CM9 4XD, UK. Directors: R.A.Scott, K.E.Horwood, T.J.Scott, N.J.Scott. VAT Reg. GB Tel:+44(0) Fax:+44(0) sales@dantech.uk.com