P7 Aftermarket Parts List. Insist on Genuine

Size: px
Start display at page:

Download "P7 Aftermarket Parts List. Insist on Genuine"

Transcription

1 P7 Aftermarket Parts List Insist on Genuine Parts

2 Page 2 At Cummins Generator Technologies, it's not just the products we make that set us apart it's how we engage our customers everyday. The unique combination of knowledge, dependability and innovation we bring to each customer relationship turns everyday service into excellent customer support. As a result we help our customers operate with greater efficiency, making it possible for them to compete more successfully throughout the world. When ordering parts, please quote the following: CONTACT Generator serial number and frame size Description of the part and part number Quantity required Q.M.S.N. = Quote Machine Serial Number. Page 1

3 Contents Product Page P BRG - 4 POLE P BRG - 4 POLE Page 2

4 Page 56 P0 P7 Range 1 bearing Page 3

5 P7 1 bearing ITEM DESCRIPTION COMMON QTY NO. PARTS 1 COMPLETE P.M.G. UPFIT KIT A P.M.G. COVER (Cover included in kit) a N.D.E. AIR INLET COVER G CORE ONLY N.D.E. AIR INLET COVER G (MARINE) CURRENT P.M.G. ROTOR/STATOR REPAIR KIT CURRENT P.M.G. ROTOR/STATOR REPAIR KIT N.D.E. BEARING CAP N.D.E. BRACKET A-F N.D.E. BRACKET G N.D.E. BEARING KIT N.D.E. BEARING CARTRIDGE EXCITER STATOR A-F (75mm) EXCITER STATOR G (100mm) MAIN STATOR FRAME ASSY Q.M.S.N N.D.E. AIR INLET COVER (INDUSTRIAL) N.D.E. AIR INLET COVER (MARINE-LOUVERED) MAIN ROTOR ASSY Q.M.S.N EXCITER ROTOR A-F (75mm) EXCITER ROTOR G (100mm) ROTATING RECTIFIER ASSY DIODE FWD/REV & VARISTOR KIT RSK MAIN TERMINAL BOARD Q.M.S.N TERMINAL BOX ENDPANEL N.D.E TERMINAL BOX ENDPANEL D.E TERMINAL BOX SIDE PANEL TERMINAL BOX LID Page 57 4 ITEM DESCRIPTION COMMON QTY NO. PARTS 22 A.V.R. COVER PLATE (ACCESS) A.V.R. COVER PLATE (BLANKING) A.V.R. MOUNTING BRACKET A.V.R. MX341 (Series 3) E /1P....1 A.V.R. MX E /1P AUXILIARY TERMINAL BOARD HEATER VOLT HEATER VOLT HEATER VOLT (G CORE) HEATERS VOLT (G CORE) TERMINAL BOX FOR HEATERS D.E. ADAPTOR KIT (SAE 0) D.E. ADAPTOR KIT (SAE 00) D.E. SCREEN (INCLUDED IN ADAPTORS KITS)....SEE ITEM LOUVRE KIT SAE 00 - A-F LOUVRE KIT SAE 00 - G LOUVRE KIT SAE 0 - A-F LOUVRE KIT SAE 0 - G COUPLING KIT SAE 18 (STANDARD) COUPLING KIT SAE 18 (SPECIAL 12 HOLE) COUPLING KIT SAE COUPLING KIT SAE ISOLATION TRANSFORMER 2 to 1 (up to 480V) ISOLATION TRANSFORMER 2.5 to 1 (500 to 600V) ISOLATION TRANSFORMER 3 to 1 (601 to 720V)

6 Page 58 P0 P7 Range 12 bearing Page 5

7 P7 2 bearing ITEM DESCRIPTION COMMON QTY NO. PARTS 1 COMPLETE P.M.G. UPFIT KIT A P.M.G. COVER (Cover included in above kit) a N.D.E. AIR INLET COVER G N.D.E. AIR INLET COVER G (MARINE) CURRENT P.M.G. ROTOR/STATOR REPAIR KIT CURRENT P.M.G. ROTOR/STATOR REPAIR KIT N.D.E. BEARING CAP to N.D.E. BRACKET A-F N.D.E. BRACKET G N.D.E. BEARING KIT N.D.E. BEARING CARTRIDGE EXCITER STATOR A-F (75mm) EXCITER STATOR G (100mm) MAIN STATOR FRAME ASSY Q.M.S.N N.D.E. AIR INLET COVER (INDUSTRIAL) N.D.E. AIR INLET COVER (MARINE-LOUVERED) MAIN ROTOR ASSY Q.M.S.N EXCITER ROTOR A-F (75mm) EXCITER ROTOR G (100mm) ROTATING RECTIFIER ASSY DIODE FWD/REV & VARISTOR KIT RSK MAIN TERMINAL BOARD Q.M.S.N TERMINAL BOX ENDPANEL N.D.E TERMINAL BOX ENDPANEL D.E TERMINAL BOX SIDE PANEL TERMINAL BOX LID A.V.R. COVER PLATE (ACCESS) A.V.R. COVER PLATE (BLANKING) Page 59 6 ITEM DESCRIPTION COMMON QTY NO. PARTS 23 A.V.R. MOUNTING BRACKET A.V.R. MX341 (Series 3) E /1P....1 A.V.R. MX E /1P AUXILIARY TERMINAL BOARD HEATER VOLT HEATER VOLT HEATER VOLT (G CORE) HEATERS VOLT (G CORE) TERMINAL BOX FOR HEATERS D.E. BRACKET A-E D.E. BRACKET F-G D.E. BRACKET SCREEN TOP (INDUSTRIAL) D.E. BRACKET SCREEN BOTTOM LOUVRE KIT A-F LOUVRE KIT-G D.E. BEARING CARTRIDGE A-E D.E. BEARING CARTRIDGE F-G D.E. BEARING KIT A-E D.E. BEARING KIT F-G D.E. BEARING CAP A-E D.E. BEARING CAP F-G BRG ADAPTOR KIT (SAE 00) BRG ADAPTOR KIT (SAE 0) ISOLATION TRANSFORMER 2 to 1 (up to 480V) ISOLATION TRANSFORMER 2.5 to 1 (500 to 600V) ISOLATION TRANSFORMER 3 to 1 (601 to 720V)

8 Worldwide Parts Locations AUSTRALIA CANADA CHINA GERMANY INDIA Regd. Office: Cummins Generator Technologies Australia PO Box 6027 Baulkham Hills Business Centre Baulkham Hills NSW 2153 Tel: Fax: Cummins Generator Technologies Canada 2275 Lakeshore Blvd. West Etobicoke Ontario M8V 3Y3 Tel: Fax: Cummins Generator Technologies China No. 11 Xiang Jiang Road Wuxi High-Technical Industrial Dev. Zone Wuxi Jiangsu PR of China Tel: Fax: Cummins Generator Technologies Germany GmbH Bunsenstraße 17 D Ingolstadt Tel: +49 (0) 8 41/ Fax: +49 (0) 8 41/ Cummins Generator Technologies India Limited Godrej Eternia-C, B'Wing, 5th Floor, Wakdewadi, Mumbai-Pune Road, Shivajinagar, Pune Tel.: +91 (0) Fax: +91 (0) ITALY JAPAN MEXICO NORWAY Cummins Generator Technologies Italia s.r.l. Via Carducci 125 Sesto San Giovanni (MI) Tel: +39 (0) Fax: +39 (0) Sole Distributor for Japan: Sawafuji Electric Co. Ltd Tokyo Office, Sakuma Seika Bldg. 7 F , Ikebukuro, Toshima-Ku Tokyo , Japan Tel: Fax: Nitta Plant: Tel: Fax: Cummins Generator Technologies Mexico Av. Circuito Mexico No. 185 Parque Industrial 3 Naciones San Luis Potosi, SLP C.P Tel: Fax: Cummins Generator Technologies Norway Risløkkveien 2 Postboks 28, Økern N-0508 Oslo Tel: Fax: SINGAPORE SPAIN UK USA Cummins Generator Technologies Singapore 10 Toh Guan Road #05-04 TT International Tradepark Singapore Tel: Fax: Cummins Generator Technologies Spain Poligono Industrial "Los Linares" Avda. De Fuenlabrada 38 E Humanes de Madrid Tel: Fax: Cummins Generator Technologies Ltd Barnack Road Stamford Lincolnshire PE9 2NB Tel: +44 (0) Fax: +44 (0) Cummins Generator Technologies USA rd Ave N.E. Fridley, MN Tel: Fax: info@cumminsgeneratortechnologies.com Copyright 2009 Cummins Generator Technologies Ltd. All Rights Reserved STAMFORD is a registered trade mark of Cummins Generator Technologies Ltd. Cummins and the Cummins Logo are registered trade marks of Cummins Inc. SP-PARTS LIST_ _GB

Publication No /ED7/E April Installation, Service & Maintenance Manual NAC 160 & 190 RANGE

Publication No /ED7/E April Installation, Service & Maintenance Manual NAC 160 & 190 RANGE Publication No. 93-102/ED7/E April 2005 Installation, Service & Maintenance Manual NAC 160 & 190 RANGE SAFETY PRECAUTIONS Before operating the generating set, read the generating set operation manual and

More information

Installation Guidelines for Marine Application

Installation Guidelines for Marine Application Doc No: N2//053/ED1E www.newage-avkseg.com Installation Guidelines for Marine Application The technical data enclosed is accurate as of the date of print. Continuous development and improvement of our

More information

Installation Guidelines for Standby Application

Installation Guidelines for Standby Application Doc No: N2//052/ED1E www.newage-avkseg.com Installation Guidelines for Standby Application The technical data enclosed is accurate as of the date of print. Continuous development and improvement of our

More information

Installation Instructions

Installation Instructions c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns

More information

Installation Instructions

Installation Instructions c Installation Instructions K-Series Fork Positioner Termination Kits 0, 0, 0, 000 and 0 This sheet provides installation instructions and replacement parts list for Cascade High Termination Kits 0, 0,

More information

the ultimate alternator range

the ultimate alternator range the ultimate alternator range The Ultimate Range Stamford AvK 4 5,000kVA Utilising wire-wound technology and with an output extending from 4 to 5,000kVA, genuine STAMFORD alternators are designed for delivering

More information

UCI224E - Winding 06. Technical Data Sheet APPROVED DOCUMENT

UCI224E - Winding 06. Technical Data Sheet APPROVED DOCUMENT - Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as

More information

UCI274E - Winding 06 APPROVED DOCUMENT. Technical Data Sheet

UCI274E - Winding 06 APPROVED DOCUMENT. Technical Data Sheet - Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as

More information

PowerBox C1000 D2R and C1250 D2R. Reliable, flexible power systems engineered to provide cost-effective power even in the most remote environments

PowerBox C1000 D2R and C1250 D2R. Reliable, flexible power systems engineered to provide cost-effective power even in the most remote environments PowerBox C1000 D2R and C1250 D2R Reliable, flexible power systems engineered to provide cost-effective power even in the most remote environments The new PowerBox Built for harsh environments The new PowerBox

More information

UCI224C - Winding 06. Technical Data Sheet APPROVED DOCUMENT

UCI224C - Winding 06. Technical Data Sheet APPROVED DOCUMENT UCI224C - Winding 06 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

UCI224E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT

UCI224E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet the requirements of eliminates

More information

UCI224F - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT

UCI224F - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet the requirements of eliminates

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35Q R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark

More information

PM734E - Winding 28. Technical Data Sheet APPROVED DOCUMENT

PM734E - Winding 28. Technical Data Sheet APPROVED DOCUMENT - Winding 28 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications

More information

HCI434E/444E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

HCI434E/444E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet HCI434E/444E - Technical Data Sheet HCI434E/444E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet

More information

HCI534F/544F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

HCI534F/544F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet HCI34F/44F - Technical Data Sheet HCI34F/44F SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35A R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Blank Safety Decals 2 cascade 2 cascade

More information

Gear Pumps/Motors Series PGP/PGM 500

Gear Pumps/Motors Series PGP/PGM 500 Gear Pumps/Motors Series PGP/PGM 500 Express Delivery Program Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product

More information

Quality and Service worldwide. Hydraulic Accessories Flow Indicators

Quality and Service worldwide. Hydraulic Accessories Flow Indicators Quality and Service worldwide Hydraulic Accessories Flow Indicators Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0

More information

HCI434C/444C - Winding 17 APPROVED DOCUMENT. Technical Data Sheet

HCI434C/444C - Winding 17 APPROVED DOCUMENT. Technical Data Sheet - Winding 17 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international

More information

AGN 230 S0/S1 Alternators

AGN 230 S0/S1 Alternators Application Guidance Notes: Technical Information from Cummins Generator Technologies AGN 230 S0/S1 Alternators INTRODUCTION Cummins Generator Technologies (CGT) are part-way through a product refresh

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Single-Double Pallet Handler Catalog Number 5G-FDS-B R9 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Publications OOL

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Paper Roll Clamp 3H-RTF-AX8-00 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 3 4 Decals 7 8 C-67554-4

More information

UCI274E - Winding 14 APPROVED DOCUMENT. Technical Data Sheet

UCI274E - Winding 14 APPROVED DOCUMENT. Technical Data Sheet UCI274E - Winding 14 Technical Data Sheet UCI274E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

UCI224F - Winding 25. Technical Data Sheet APPROVED DOCUMENT

UCI224F - Winding 25. Technical Data Sheet APPROVED DOCUMENT - Winding 25 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as

More information

UCI224F - Winding 14. Technical Data Sheet APPROVED DOCUMENT

UCI224F - Winding 14. Technical Data Sheet APPROVED DOCUMENT UCI224F - Winding 14 Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

HCI634H - Winding 311 and 312. Technical Data Sheet

HCI634H - Winding 311 and 312. Technical Data Sheet HCI634H - Winding 311 and 312 Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Paper Roll Clamp H-RCF-AQ008 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-67554-4 RC860.ai

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model 36G-CCT Tipping Clamp Catalog Number 36G74237 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank 1 Safety Decals 4 1 3 2

More information

Parts Manual. cascade. corporation. Model. Paper Roll Clamp 20H-RTF-A01X-149. Catalog Number

Parts Manual. cascade. corporation. Model. Paper Roll Clamp 20H-RTF-A01X-149. Catalog Number c Parts Manual Model Catalog Number Paper Roll Clamp 0H-RTF-A0X-9 cascade corporation For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-03 OR Write: Cascade

More information

UCI224G - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCI224G - Winding 311 APPROVED DOCUMENT. Technical Data Sheet - Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other

More information

HCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet

HCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet HCI634J - Winding 311 and 312 Technical Data Sheet HCI634J SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

HCI634H - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet

HCI634H - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet HCI634H - Winding 311 and 312 Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Multi-Purpose Clamp 8G-MCS-48 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,

More information

HCM434E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT

HCM434E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT HCM434E - Winding 311 Single Phase Technical Data Sheet HCM434E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd

More information

Application Engineering Department Special Product. 170D-CFR Fork Clamp - Revolving

Application Engineering Department Special Product. 170D-CFR Fork Clamp - Revolving Parts Manual For units with serial# 2177229 2226222 Application Engineering Department Special Product 170D-CFR-66999 Fork Clamp - Revolving FEATURES:..Integral mounting includes rollers, chain anchors

More information

UCI224E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCI224E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet UCI224E - Winding 311 Technical Data Sheet UCI224E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

UCM274E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT

UCM274E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT UCM274E - Winding 311 Single Phase Technical Data Sheet UCM274E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd

More information

UCI224C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCI224C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet UCI224C - Winding 311 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

UCI224D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS

UCI224D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS UCI224D - Winding 311 Technical Data Sheet UCI224D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

UCM224D - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT

UCM224D - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT UCM224D - Technical Data Sheet UCM224D SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other

More information

Parts Manual. cascade. corporation. Model. 120H Tower Roll Clamp 120H Catalog Number

Parts Manual. cascade. corporation. Model. 120H Tower Roll Clamp 120H Catalog Number c Parts Manual Model Catalog Number 0H Tower Roll Clamp 0H74584 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-7554-4 RC80.ai 4 5 C-7554-5595-R

More information

PI734G - Winding 312. Technical Data Sheet APPROVED DOCUMENT

PI734G - Winding 312. Technical Data Sheet APPROVED DOCUMENT - Winding 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international standards

More information

UCI274D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCI274D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet UCI274D - Winding 311 Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

Parts Manual. cascade. corporation. Model. Paper Roll Clamp 10H-RCP-A010. Catalog Number

Parts Manual. cascade. corporation. Model. Paper Roll Clamp 10H-RCP-A010. Catalog Number c Parts Manual Model Catalog Number Paper Roll Clamp 10H-RCP-A010 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com 3 Decals 1 2 7 5 RC5371.eps 1 7

More information

Installation Instructions

Installation Instructions c Installation Instructions Electronic Pressure Regulator Kits with Backhand Relief This manual provides instructions for Cascade Electronic Pressure Regulator with backhand relief and Indicator System.

More information

PI736F - Winding 312. Technical Data Sheet

PI736F - Winding 312. Technical Data Sheet PI736F - Winding 312 Technical Data Sheet PI736F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international

More information

HCM534D - Winding 14 APPROVED DOCUMENT. Technical Data Sheet

HCM534D - Winding 14 APPROVED DOCUMENT. Technical Data Sheet - Winding 14 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards

More information

UCDI274J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCDI274J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet UCDI274J - Winding 311 Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

HCI 534E/544E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

HCI 534E/544E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet HCI 34E/44E - Winding 311 Technical Data Sheet HCI34E/44E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

HCI 534C/544C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

HCI 534C/544C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet HCI 34C/44C - Winding 311 Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant

More information

Installation Instructions

Installation Instructions c Installation Instructions Light Kits for Three-Position Pressure Relief Valve 0 This manual provides installation instructions for, or Kits used with -Position Pressure Relief Valve 0. The switch box

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Paper Roll Clamp H-RDP-B0 R0 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-67554-4 RC860.ai

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Paper Roll Clamp 0H-RBP-B0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,

More information

One machine multiple applications.

One machine multiple applications. One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A330 R0 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank All dealerships with an

More information

Installation Instructions

Installation Instructions c Installation Instructions Pressure Regulator Kit 6804769 This manual provides instructions for Cascade Pressure Regulator Kit 68047669 for carton clamps. The kit includes a valve, a driver operated high-low

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number QFM Push/Pull E-QLB-Q00 R cascade corporation To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Roll Clamp 8H-RCP-A003 R3 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 3 Decals 7 8 C-7- RC380.ai 3 C-7-9-R @

More information

HCM534F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

HCM534F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet - Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications

More information

UCM274E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCM274E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet UCM274E - Winding 311 Technical Data Sheet UCM274E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd

More information

H2R and H2L Cable Reel

H2R and H2L Cable Reel c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207

More information

UCM274C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet

UCM274C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet UCM274C - Winding 311 Technical Data Sheet UCM274C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd

More information

HCM634K - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet

HCM634K - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet - Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS WINDING 311 and 312 STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A016 R3 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A062 R5 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234

More information

S3.8 G6 CoolPac. Description. Features rpm (50 Hz Ratings)

S3.8 G6 CoolPac. Description. Features rpm (50 Hz Ratings) S3.8 G6 CoolPac Description The Cummins S Series engine powered CoolPac sets offer the lowest cost of maintenance thereby proving to be the most economical power solution. With the robust design and integrated

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Paper Roll Clamp 0H-RCF-BX-0 corporation OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com Decals 8 C-- RC80.ai C-- 9-R @ Disengaged

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Sideshifter 100F-SSS-B017 R2 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com PART NUMBER Decals 1 2 Recommended

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Single-Double Pallet Handler Catalog Number 3G-FDS-B500 R6 corporation To Order Parts call: 888-7-33, Fax: 888-39-034 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Single-Double Pallet Handlers Catalog Number 5G-FDS-A R7 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Publications OOL CATALOG

More information

LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS

LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS For the installation and repair of vehicle air conditioning lines ONE SYSTEM ENDLESS POSSIBILITIES MORE THAN 1.5 BILLION LOKRINGS HAVE BEEN SUCCESSFULLY

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A011 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker

More information

Installation Instructions

Installation Instructions c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each

More information

Installation Instructions

Installation Instructions c Installation Instructions -Position Electronic Pressure Regulator Kits This manual provides instructions for Cascade Electronic Pressure Regulator and Indicator System. The kits provide selectable clamp

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Serial Number Fork Positioner 100D-FPB-04C R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Base Unit Group 1 2 3

More information

QSL9-G5. Description. Features rpm (50 Hz Ratings) 1800 rpm (60 Hz Ratings)

QSL9-G5. Description. Features rpm (50 Hz Ratings) 1800 rpm (60 Hz Ratings) QSL9-G5 Description Cummins QSL engines are built to deliver heavy-duty performance. Full-authority electronic engine controls combine with the high-pressure fuel system, 24-valve design and centred injectors

More information

Parts Manual. cascade. corporation. Model. Roll Clamp 38H-RCP-3A Catalog Number

Parts Manual. cascade. corporation. Model. Roll Clamp 38H-RCP-3A Catalog Number c Parts Manual Model Catalog Number Roll Clamp 8H-RCP-A-000 cascade corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number 5G Rotating Clamp 5G-RSS-A-7475 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Blank Safety Decals WARNING:

More information

PI044D - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI044D - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI144G - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI144G - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI044H - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI044H - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI044F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI044F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI044E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI044E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI144E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI144E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI144F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet

PI144F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE

More information

PI044G - Winding 06 APPROVED DOCUMENT. Technical Data Sheet

PI044G - Winding 06 APPROVED DOCUMENT. Technical Data Sheet - Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

Parts Manual. cascade. corporation. Model. Fork Positioner 45D-FPB-109. Catalog Number

Parts Manual. cascade. corporation. Model. Fork Positioner 45D-FPB-109. Catalog Number c Parts Manual Model Catalog Number Fork Positioner 45D-FPB-09 cascade corporation To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com

More information

PI144J - Winding 05 APPROVED DOCUMENT. Technical Data Sheet

PI144J - Winding 05 APPROVED DOCUMENT. Technical Data Sheet - Winding 05 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international

More information

Abstract. Benefits and challenges of a grid coupled wound rotor synchronous generator in a wind turbine application

Abstract. Benefits and challenges of a grid coupled wound rotor synchronous generator in a wind turbine application Issue #WP102: Technical Information from Cummins Generator Technologies Benefits and challenges of a grid coupled wound rotor synchronous generator in a wind turbine application White Paper Ram Pillai

More information

Installation Instructions

Installation Instructions c Installation Instructions Sequential Loop -Position Electronic Pressure Regulator Kits This manual provides instructions for Cascade Electronic Pressure Regulator and Indicator System. The kits provide

More information

6BTA5.9-G5. Description. Features rpm (50 Hz Ratings)

6BTA5.9-G5. Description. Features rpm (50 Hz Ratings) 6BTA5.9-G5 Description The B5.9 engine has established an unrivalled reputation for reliability, incorporating features designed to maximise engine integration within OEM installation. This engine has

More information

Installation Instructions

Installation Instructions c Installation Instructions Mark Radio Frequency (RF) Hydraulic Control Kit 6819446 This sheet provides installation instructions for the truck mounted component and replacement parts list for Cascade

More information

Parts Manual. cascade. corporation. 100F Sideshifter. Model 100F-SSS-B084 R1. Catalog Number

Parts Manual. cascade. corporation. 100F Sideshifter. Model 100F-SSS-B084 R1. Catalog Number c Parts Manual Model Catalog Number 100F Sideshifter 100F-SSS-B084 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an open

More information

KTA38-G5. Features. Description rpm (50 Hz Ratings)

KTA38-G5. Features. Description rpm (50 Hz Ratings) KTA38-G5 Typical picture Description The KTA38-Series benefits from years of technical development and improvement to bring customers an innovative and future proof diesel engine that keeps pace with ever

More information

KTA50-G8. Specification sheet. Features. Description. Codes and standards rpm (50 Hz Ratings)

KTA50-G8. Specification sheet. Features. Description. Codes and standards rpm (50 Hz Ratings) Specification sheet KTA50-G8 Description The KTA50-Series benefits from years of technical development and improvement to bring customers an innovative and future proof diesel engine that keeps pace with

More information

Features. Cylinder Block - Alloy cast iron with removable wet liners.

Features. Cylinder Block - Alloy cast iron with removable wet liners. NTA855-G4 Description Features The Cummins NT-Series engines have been service proven through millions of hours of operation in some of the world s most demanding applications. The 14 litre, six-cylinder

More information

PI144D - Winding 17. Technical Data Sheet APPROVED DOCUMENT

PI144D - Winding 17. Technical Data Sheet APPROVED DOCUMENT PI144D - Winding 17 Technical Data Sheet PI144D SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international standards

More information

Parts Manual. cascade

Parts Manual. cascade c Parts Manual Model Catalog Number Paper Roll Clamp H-RCP-B005 R0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation,

More information

Installation Instructions

Installation Instructions c Installation Instructions Clamp Open Guard Switch Activated Retrofit Kit 6048125 This manual provides installation instructions for Cascade Clamp Open Guard Retrofit Kit. The kit converts an existing

More information