UID ULTRA INDUCTION SERIES ULTRA INDUCTION DOME. APPLICATIONS High and low bay applications, gymnasiums, etc. FEATURES

Transcription

1

2

3 ULTRA INDUCTION SERIES Fixture Type Approved By UID ULTRA INDUCTION DOME APPLICATIONS High and low bay applications, gymnasiums, etc. FEATURES 100,000 hour system life significantly reduces maintenance. 33 to 67% average energy saving over HID equivalent. Sylvania ICETRON Lamp and Ballast System. Instant on- immediate re-strike, no warm up period. Acrylic or aluminum dome option. High color rendering index 80 CRI 100/150w systems operate down to -40*C/-40*F. Excellent lumen maintenance - 70% at 60,000 hours. Made in the USA, qualifies for FAR & ARRA - Buy American Act. Sylvania Quick Year no fail warranty. CONSTRUCTION.032 white pre-painted aluminum housing. Conical ribbed acrylic or spun aluminum dome option. Sylvania Icetron Lamp and Ballast System: Inductively coupled electrodeless lamp 70, 100 or 150 watt. Quicktronic Ballast System 100 or 150w, v, electronic, input frequency 50/60 Hz, U Class P, Type 1, outdoor CSA, certified FCC 47CFR, sound rated A ANSI C62.41 Cat. A 2 lamp unit shown. Available with 1 or 2 lamps. Acrylic or aluminum dome option. DIMENSIONS Lamps L W H Wt /8 23 1/8 26 ½ 24 lbs /8 23 1/8 26 ½ 27 lbs IP RATING: IP 43 / MAX TEMP: 55 C/131 F - MIN TEMP: *-40 C/-40 F Ambient temperature ratings may vary with lamp; 100 and 150 watt systems operate in ambient temperatures down To -40*C/-40*F (70 watt system: -29*C/-20F). MOUNTING OPTIONS Hook or pendant mount from top center location. SYLVANIA ICETRON LAMP & BALLAST SYSTEM Lamp Wattage Ballast Wattage System Wattage (120/277) Lumen Output / / / / SPECIFICATION ex: UID-IT K-U-TC-H-ACD/AC Custom options and accessories available. Please consult factory. Series System Lamp Lamp Qty Wattage Ballast Wattage Color Temp Reflector Voltage Power In Mounting Dome (w/lens Options) Accessories Controls Custom UID IT 1 or K 41K 50K N/A 1 = 120V 2 = 277V 3 = 347V 4 = 480V U = Univ. ( V) TC = Top Center H = Hook P/MH? = Pendant w/ Myers Hub? =.5 or.75 ACD/AC = Acrylic Dome with Acrylic Lens ALD/AC = Aluminum Dome with Acrylic Lens LWC = Light Duty Wire Cage (May substitute for lens) C/* = Cord * = Length P* = Plug * = Nema Type PC = Photocell (Specify Voltage) MS = Motion Sensor (Consult Factory) Consult Factory Copyright st Source Lighting

4 ULTRA INDUCTION SERIES Fixture Type Approved By UIPG-DM ULTRA INDUCTION PARKING GARAGE - Dome APPLICATIONS Buildings, various outdoor and area applications. FEATURES 100,000 hour system life significantly reduces maintenance. 33 to 67% average energy saving over HID equivalent. Sylvania ICETRON Lamp and Ballast System. Instant on- immediate re-strike, no warm up period. Ideal for difficult to access installations. High color rendering index 80 CRI 100/150w systems operate down to -40*C/-40*F. Excellent lumen maintenance - 70% at 60,000 hours. Made in the USA, qualifies for FAR & ARRA - Buy American Act. Sylvania Quick Year no fail warranty. CONSTRUCTION Die cast back housing with built in template for mounting to an electrical box, chromate conversion coating, textured dark bronze finish, coin plugs with O-rings provided for conduit and photocell on sides and back, White91 aluminum reflector, extended vandal resistant polycarbonate lens. Sylvania Icetron Lamp and Ballast System: Inductively coupled electrodeless lamp 40, 70 or 100 watt. Quicktronic Ballast System 40, 100 or 150w, v, electronic, input frequency 50/60 Hz, U Class P, Type 1, outdoor CSA, certified FCC 47CFR, sound rated A STANDARD DISTRIBUTION (NON CUT-OFF) IP RATING: IP 65 / MAX TEMP: 55 C/131 F - MIN TEMP: *-40 C/-40 F Ambient temperature ratings may vary with lamp; 100 and 150 watt systems operate in ambient temperatures down To -40*C/-40*F (40, 70 watt system: -20*C/-20*F). MOUNTING OPTIONS Surface mount. Top center access. Coin plugs provided on sides and back. DIMENSIONS Diameter Depth/Height Wt /4 15 lbs SYLVANIA ICETRON LAMP & BALLAST SYSTEM Lamp Wattage Ballast Wattage System Wattage (120/277) Lumen Output /42 3, /77 6, /103 8, /149 11,000 SPECIFICATION ex: UIPG-DM-IT K-A-U--TC-SM-PCL Custom options and accessories available. Please consult factory. Series Fixture System Lamp Type Qty Wattage Ballast Wattage Color Temp Reflector Voltage Power In Mounting Lens Accessories Lamp Purchase Separately UIPG DM IT K 41K 50K WH91 = White91 1 = 120V 2 = 277V 3 = 347V 4 = 480V U = Univ. ( V) TC = Top Center SM = Surface Mount PCL = Polycarbonate Lens PC = Photocell (Stem Swivel) Specify Voltage Copyright st Source Lighting

5 ULTRA INDUCTION SERIES Fixture Type UIPG-SQ Ultra Induction Parking Garage Square Housing Approved By APPLICATIONS Parking garages, tunnels, walkways, various canopy applications FEATURES 100,000 hour system life significantly reduces maintenance. 33 to 67% average energy saving over HID equivalent. Sylvania ICETRON Lamp and Ballast System. Instant on- immediate re-strike, no warm up period. Ideal for difficult to access installations. High color rendering index 80 CRI Excellent lumen maintenance - 70% at 60,000 hours. Made in the USA, qualifies for FAR & ARRA - Buy American Act. Sylvania Quick Year no fail warranty. CONSTRUCTION Die cast aluminum housing, ½ coin plugs with O-rings for conduit and photocell on two sides and back, textured dark bronze finish, chromate conversion coating, white aluminum reflector, clear prismatic polycarbonate lens. Dimensions Length Width Height Weight UIPG-SQ 12.38" 12.38" 8.75" 13 lbs IP RATING: IP 65 / MAX TEMP: 55 C/131 F - MIN TEMP: *-29 F MOUNTING OPTIONS Surface mount. Coin plugs provided for access on top and sides. For mount directly over recessed electrical box or with conduit. Sylvania ICETRON Induction Lamp & Ballast System Wattage Input Watts Color Output Rated Life Lamp Ballast 120/277v CRI Lumens Lamp & Ballast / , ,000 Hrs / , ,000 Hrs / , ,000 Hrs / , ,000 Hrs. SPECIFICATION example: UIPG-SQ-IT K-A-U-SM-PCL Custom options and accessories available. Please consult factory. Series Fixture System Lamp Type Qty Wattage Ballast Wattage Color Temp Reflector Voltage Power In Mounting Lens Accessories Lamp Purchase Separately UIPG SQ IT K 41K 50K A = Aluminum 1 = 120V 2 = 277V 3 = 347V 4 = 480V U = Univ. ( V) NA - Coin Plugs Provided for Access SM = Surface Mount PCL = Polycarbonate PC = Photocell (Stem Swivel) Specify Voltage Copyright st Source Lighting

6 Product Information Bulletin ICETRON 2P/ECOLOGIC Inductively Coupled Electrodeless Systems SYLVANIA ICETRON ECOLOGIC lamp and QUICKTRONIC ballast system reduces maintenance cost due to the long 100,000 hour average rated life. This is five to ten times the typical service life of conventional fluorescent and metal halide lamps. The inductively coupled electrodeless lamp uses magnetic-induction technology instead of an electrode at each end of the fluorescent tube to generate light. The absence of electrodes allows much longer lamp life. These lamps pass the Federal TCLP test, classifying them as non-hazardous waste in most states. Lamp Comparison 2-Prong connector system with 24 inch lamp lead for system assembly Connector assembly fits through 1/2" diameter conduit Long 100,000 hour life White Light 3500K, 4100K and 5000K Consistent color 80CRI Instant on instant restrike High output electronic system Universal voltage ballast Starting temperatures as low as 40 F Amalgam technology for wide operating temperature range Ballast remote mounting possible Product Availability System Initial Life Wattage System Lamp Ballast (hrs) 120/277V Lumens 1 ICETRON 70/2P/ECO QT 1x100ICE/UNV-T 100,000 79/ ICETRON 100/2P/ECO QT 1x100ICE/UNV-T 100, / ICETRON 100/2P/ECO QT 1x150ICE/UNV-T 100, /149 11,000 ICETRON 150/2P/ECO QT 1x150ICE/UNV-T 100, /156 12, Lumen data for 3500K and 4100K; lumens for 5000K will be slightly lower. System Initial System System System Lumens Life (hrs) Watts Lumens 1 hours 10 hrs/start CRI ICETRON , W Metal Halide , FBO31/800XP , ICETRON , W Metal Halide , FBO31/800XP , ICETRON , , , W Metal Halide , , Lumen data for 3500K and 4100K; lumens for 5000K will be slightly lower. Application Information Applications Indoor & outdoor Decorative street lighting Tunnel Bridge Internally lighted signs Escalators Low bay Indirect Freezers/cold storage Application Notes 1. Universal operating position For non-horizontal lamp operation, the amalgam tip should be pointed down. 2. Universal input voltage: 120/277 volts, 50/60 Hz. 3. Low EMI complies with FCC Non-Consumer limits. Thermal Characteristics 1. Fixture must act as heat sink for lamp induction cores and ballast good thermal coupling required. 2. Maximum bulb wall temperature of 302 F (150 C). 3. Maximum fixture temperature at lamp base mounting of 212 F (100 C). 4. Amalgam tip temperature for 90% light output F ( C). SYLVANIA ICETRON ECOLOGIC fluorescent lamps are designed to pass the Federal Toxicity Characteristic Leaching Procedure (TCLP) 1 criteria for classification as non-hazardous waste in most states 2. 1 TCLP test results are based on NEMA LL Series standards and are available on request. 2 Lamp disposal regulations may vary; check your local & state regulations. 5. Max 158 F (70 C) ballast temperature at test point Tc on ballast label for QT1X150 UNV-T, 149 F (65 C) for QT1X100 UNV-T. 6. Ballast may be mounted up to 66 feet from lamp. Please request remote mounting instructions. 7. For cold temperature application, use suitably enclosed fixture to maximize lumen output. 8. Amalgam tip covers (NAED 22093) available for faster warm-up under very cold operating conditions. 9. ICETRON TYPE-1 outdoor ballast must be within overall electrical enclosure and fully protected from any exposure to moisture " wiring extension/harness available (NAED 49755). FL061R4 7/07

7 Technical Information Lumen Maintenance Spectral Power Distribution 3500K % Rated Lumens ,000 40,000 60,000 80, ,000 Burning Hours Relative Spectral Power K Wavelength (nm) Spectral Power Distribution 4100K Spectral Power Distribution 5000K K K Relative Spectral Power Relative Spectral Power Wavelength (nm) Wavelength (nm) Luminous Intensity Distribution 0 Degrees 45 Degrees 90 Degrees

8 Lamp Dimensions ICETRON 70 ICETRON 100 ICETRON 150 Dim.* in. (mm) In. (mm) In. (mm) Height of glass H ± ± ± ± ± ± 1 Overall height H ± ± ± ± ± ± 2 Tube to mount height H3.039 (Min) 10 (Min).039 (Min) 10 (Min).039 (Min) 10 (Min) Length of main body L ± ± ± ± ± ± 1.2 Overall Length L (Max) 315 (Max) 12.4 (Max) 315 (Max) (Max) 415 (Max) Mount hole spacing L ± ± ± ± ± ± 3.7 (between cores) Mount hole spacing L ± ± ± ± ± ± 2.7 (each core) Bracket spacing L (Min) 105 (Min) 4.13 (Min) 105 (Min) 8.07 (Min) 205 (Min) Amalgam tip length L (Max) 15 (Max) 0.59 (Max) 15 (Max) 0.59 (Max) 15 (Max) Lead wire length L (Min) (Min) (Min) (Min) (Min) (Min) Slot width S 0.20 ± ± ± ± ± ± 0.2 Tip to centerline T 0.98 ± ± ± ± ± ± 2 Width W 5.41 ± ± ± ± ± ± 1.5 Lamp weight lb (kg) 2.1 lbs 0.95 kg 2.1 lbs 0.95 kg 2.5lbs 1.14 kg * Dimensions subject to change H1 H3 H L4 L3 L4 connection side L5 W amalgam tube L6 L7 L1 L2 Ballast Dimensions Dimensions: Overall: 7.15" L x 3.96" W x 1.70" H Mounting: 6.70" L x 1.90" W Packaging: Quantity: 5 Weight: 1.9 lbs ea. (approx.)

9 Sample Specification System shall be (70W, 100W, or 150W) ICETRON ECO inductively coupled electrodeless lamp and ballast system having (6500, 8000, 11,000 or 12,000) system lumens. System shall have an average rated life of 100,000 hours. Lamp(s) shall be designed to pass the Federal TCLP test. Warranty Information Shall be covered for up to 60 months with a comprehensive system warranty. Refer to QUICK 60+ system warranty bulletin for additional details. Ordering and Specification Information SYSTEMS System Initial Lamp Ballast Lamp Wattage System 1 Mean 1,2 Rated LPW Description Description Wattage 120/277V BF Lumens Lumens Life 120/277V ICE70/2P/ECO QT 1x100ICE/UNV-T 70 79/ ,000 82/84 ICE100/2P/ECO QT 1x100ICE/UNV-T / ,000 75/77 ICE100/2P/ECO QT 1x150ICE/UNV-T / , ,000 71/73 ICE150/2P/ECO QT 1x150ICE/UNV-T / , ,000 74/76 LAMPS Item Ordering Initial Mean Number Description Lamp Lumens Lamp Lumens 2 Color Temp K 3 CRI ICE70/835/2P/ECO ICE70/841/2P/ECO ICE70/850/2P/ECO ICE100/835/2P/ECO ICE100/841/2P/ECO ICE100/850/2P/ECO ICE150/835/2P/ECO 12, ICE150/841/2P/ECO 12, ICE150/850/2P/ECO 11, Lumen data for 3500K and 4100K; lumens for 5000K will be slightly lower. 2. Mean Lumens at 40,000 Hours. 3. Lumens, wattage, color and CRI an amalgam tip temperature of 149 F (65 C) for ICETRON F (70 C) amalgam tip temperature for ICETRON 70 & ICETRON 150. BALLASTS Item Number Ordering Description Voltage Range Compatible Lamps QT1X100 ICE/UNV-T ICE70/2P, ICE100/2P QT1X150 ICE/UNV-T ICE100/2P, ICE150/2P OSRAM SYLVANIA National Customer Service and Sales Center N. Union Street Westfield, IN Industrial Commercial Phone: Fax: National Accounts Phone: Fax: OEM/Specialty Markets Phone: Fax: Display/Optic Phone: Fax: In Canada OSRAM SYLVANIA LTD. Headquarters 2001 Drew Road Mississauga, ON L5S 1S4 Industrial Commercial Phone: Fax: Special Markets Phone: Fax: Ballast Specification Lamp Frequency: KHz Input Frequency: 50/60Hz Voltage Range: 120 to 277 ± 10% UL Listed Class P, Type1 Outdoor CSA Certification Lamp CCF: Less than 1.7 Low THD: Less than 15% 158 F (70 C) Maximum Temperature for QT1X150ICE/UNV-T at test point Tc on ballast label 149 F (65 C) Maximum Temperature for QT1X100ICE/UNV-T at test point Tc on ballast label Class A Sound Rating Minimum Starting Temperature -40 F (-40 C) for ICE100 and ICE150 systems Minimum Starting Temperature -13 F (-25 C) for ICE70 lamps on QT1X100 ICE/UNV-T Power Factor: Greater than 95% FCC 47CFR Part 18 Non-Consumer ANSI Cat. A Transient Protection Ballast Dimension: 7.15" L x 3.96" W x 1.70" overall Ordering Guide ICE100/835/2P/ECO ICE 100 / 8 35 / 2P / ECO Inductively Lamp Wattage 8 = 80 CR 35 = 3500K 2 Prong ECOLOGIC Coupled 70W, 100W, 41 = 4100K Connector TCLP Electrodeless 150W 50 = 5000K Compliant QT1X100ICE/UNV-T QT 1X 100 ICE / UNV -T QUICKTRONIC # Lamps Primary ICETRON Line Voltage Top Mount Lamp Wattage Inductively 120 to 277V Coupled Electrodeless 2007 OSRAM SYLVANIA 7/07 Photography Visit our website: SYLVANIA, ICETRON, QUICKTRONIC and ECOLOGIC are registered trademarks of OSRAM SYLVANIA Inc.

10 QUICK 60+ Limited Warranty Subject to change without notice. The Heart of a Comprehensive System Service Program Compare lighting system warranties you ll see that our QUICK 60+ warranty offers better coverage, more service options and, more important, peace of mind. Combination Lamp and Ballast System Limited Warranty OSRAM SYLVANIA Products Inc. ( OSPI ) warrants SYLVANIA lamps installed on QUICKTRONIC ballasts to be free from defects in material and workmanship and to operate from the date of installation (or date of manufacture if installation date is not known or available) for the time periods and subject to the Terms and Conditions specified below. If lamps fail to operate for the warranty period, OSPI will provide a free replacement lamp (but no labor allowance). If a QUICKTRONIC ballast fails to operate within the warranty period, OSPI will provide a free replacement ballast and labor allowance in accordance with the Labor Options set forth below. System 3,4 Lamp Ballast Warranty Period 8 Lamp Warranty Period* QUICKTRONIC T8 1 OCTRON Family 60 mos. 30 mos. QUICKTRONIC T8 1 OCTRON XPS, XP & XP/SS 2, 3 60 mos. 36 mos. QUICKTRONIC T8 1 OCTRON XP/XL & XP/XL/SS Family 60 mos. 60 mos. QUICKTRONIC T8 High Ambient 1, 9 OCTRON XP, XP/SS 2, 3 36/60mos.@<90 /70 C 36 mos. QUICKTRONIC 59 OCTRON FO96/XP, FO96/XP/SS 60 mos. 30 mos. QUICKTRONIC 59 OCTRON FO96 60 mos. 24 mos. QUICKTRONIC 86/T8HO High Ambient 1 OCTRON FO96HO 36/60mos.@<90 /70 C 30 mos. QUICKTRONIC T5 1, T5/HO 1 PENTRON Family mos. 24 mos. QUICKTRONIC 54T5/HO 1 PENTRON FP54/HO, FP54/C/HO, FP54/HO/SS 60 mos. 36 mos. PENTRON HO/XL 60 mos. 60 mos. QUICKTRONIC 54T5HO 1 High Ambient PENTRON FP54/HO, FP54/C/HO, FP54/HO/SS 36/60 mos.@<90 /70 C 36 mos. PENTRON HO/XL 60 mos. 60 mos. QUICKTRONIC ICE 1, 5 ICETRON 60 mos. 60 mos. QUICKTRONIC 54PHO & DL40 DULUX FT55DL, FT40DL & FT40DL/SS Family 60 mos. 24 mos. QUICKTRONIC CF 1 DULUX D/E, T/E, T/E/IN, T/E/IN/SS, T/E/C 60 mos. 24 mos. QUICKTRONIC MH 7 METALARC Family 6 (7K-12K hrs. avg. rated life) 36/60 mos. 6 mos. QUICKTRONIC MH 7 METALARC Family 6 (15K-20K hrs. avg. rated life) 36/60 mos. 12 mos. QUICKTRONIC FM FM 24 mos. 6 mos. QUICKTRONIC 96IS/96HO & 40T12 N/A 60 mos. N/A * NOTE: Fluorescent lamp warranty periods are based on a 3 hour minimum cycle, unless otherwise noted, with a maximum of 4000 hours per year. Other operating cycles may affect warranty period. Lamp warranty can renew when installation is group relamped, contact OSRAM SYLVANIA for details. 1 Occupancy sensor application, 10 minute/start minimum, allowed with QUICKTRONIC PROStart and with QUICKTRONIC ICE ballasts. 2 OCTRON SUPERSAVER bipin lamps operate on all QUICKTRONIC T8 electronic ballast (except QTP Dali models.) 3 QUICKTRONIC, Professional Series and High Efficiency Series including all IS, PS & DIM models where applicable. 4 Labor options must be pre-approved by OSPI. Any labor option or cost that is not pre-approved will not be eligible for reimbursement. 5 ICETRON Lamp Warranty Period allows up to 8760 hrs per year (continuous operation). 6 Contact OSRAM SYLVANIA for detailed specifications of METALARC lamps. 7 QUICKTRONIC MH ballasts warranty is 36 or 60 months, depending on maximum case temperature. Refer to product specifications for details. Electronic HID system warranty period is based on a minimum cycle of 10hr/start up to a maximum operation of 6,000 hours/year. 8 Maximum Case Temp. <70 C, for normal environmental operating conditions (40 C max. ambient) unless noted. Refer to product specifications for details. 9 QUICKTRONIC T8 High Ambient (HT) Series 10 PENTRON 14, 21, 28 and 35W and PENTRON HO 24, 39 and 80W. TERMS AND CONDITIONS SYLVANIA lamps and QUICKTRONIC ballasts must be installed together as a system and be installed and operated under suitable environmental conditions and in accordance with the latest National Electrical Code, Underwriters Laboratory Bulletins, and ANSI Specifications. This warranty will not apply in the event of conditions demonstrating abnormal use or stress, such as operating temp eratures in excess of maximum rated temperatures, under/over voltage conditions, excessive switching cycles (see above Note #1) or operating hours, dirty or cracked sockets, or improper lamp or ballast installation. Replacement of SYLVANIA lamps with lamps of other manufacturers will void the lamp portion of this warranty. Replacement of the QUICKTRONIC ballast with any other ballast will void the entire warranty. WARRANTY ACTIVATION / SERVICE CLAIMS The QUICK 60+ warranty is automatically activated after OSPI receives a completed QUICK 60+ warranty registration form within 30 days after installation. An acknowledgment will be sent for each registration along with a reference number for future correspondence. Service claims can be made by contacting LIGHTBULB to initiate the process for problem resolution. LABOR OPTIONS (Ballast and ICETRON lamps only) No labor allowance is made for any lamp replacement except ICETRON, during the warranty period. OSPI provides for several labor options for service under the QUICK 60+ warranty program. 1. OSPI will provide full service coverage through SYLVANIA LIGHTING SERVICES at no cost to the user of the ballast, or 2. OSPI will contact a service provider and coordinate replacement at no cost to the user of the ballast, or 3. OSPI will reimburse the purchaser reasonable, customary and necessary labor charges required to install the ballast replacement. 4. Labor options must be pre-approved by OSPI. Any labor option or cost that is not pre-approved will not be eligible for reimbursement. RETURN OF DEFECTIVE PRODUCT After contacting OSRAM SYLVANIA and receiving a return AUTHORIZATION NUMBER, the user shall promptly return the product at the user s expense to OSRAM SYLVANIA after receiving instructions as to if, when and where to ship product. Failure to follow this procedure shall void this warranty. REPLACEMENT OF PRODUCT, LIMITS OF LIABILITY The foregoing shall constitute the sole and exclusive remedy of the purchaser and the sole and exclusive liability of OSPI. NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE OR IS TO BE IMPLIED. OSPI will not, under any circumstance, whether as a result of breach of contract or warranty, tort, or otherwise, be liable for any incidental, special or consequential damages, including lost profits or revenues or any other costs or damages. OSPI reserves the right to examine all failed lamps and/or ballasts and reserves the right to be the sole judge as to whether any lamps and/ or ballasts are defective and covered under this warranty OSRAM SYLVANIA. ECS140R2-3/2011 QUESTIONS? Please call customer service at or contact your local OSRAM SYLVANIA representative.

11 Registration Form Subject to change without notice. QUICK 60+ LIMITED WARRANTY Photocopy the form below and use it to register any installation featuring QUICKTRONIC ballast systems. Also available, is our on-line version which you may find by visiting our web site at The warranty coverage begins from the date of installation, but you must register an installation in order to receive warranty service. Installation Information Location Name: Address: City: State: Zip: Send Registration To: Address: City: State: Zip: Contact Name: Phone: Operating Hours: hours/day days/year Installation Date: Occupancy Sensors: q Yes q No Comments Type & Quantities (Description and NAED Item # as Shown on label (or packaging) Ballast NAED Lamp NAED Description Item # Quantity Description Item # Quantity Comments e.g. QTP2X32T8/UNV ISN-SC FO32/830/XP/ECO Please Complete and Return To: OSRAM SYLVANIA Attn: Warranty Dept N. Union Street, Westfield, IN Tel #: 800/ warranty.service@sylvania.com Or Complete and Fax To: OSRAM SYLVANIA Fax #: 866/ Also available, is our on-line version which you may find by visiting our web site at OSRAM SYLVANIA National Customer Service and Sales Center

12 REVISION DESCRIPTION DATE APPROVED F E D C B A 1730 Industrial Drive, Auburn, CA (530) FAX (530) PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF 1ST SOURCE LIGHTING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF 1ST SOURCE LIGHTING IS PROHIBITED. USED ON : QTY: PRODUCT CODE : PROGRAM NO. DRAWN: ENGINEER : APPROVED : CHECKED : SIZE A UID-IT-2X11-D DIM SHEET DRAWING NO. REVISION

13 CONTACT US RTR TROFFER REFLECTOR KIT 2x2 Troffer Fixture Retrofit Kit Description Envirobrite s RTR Troffer Reflector kits dramatically enhance existing fixture efficiencies creating substantial energy savings with excellent return on investment. All Envirobrite kits have four different specialized material options which offer various light distributions with minimal up-front investments. These kits, in conjunction with numerous ballast and lamp configurations, can easily produce ideal IES recommended light levels with minimized energy consumption. Envirobrite kits will continue to provide consistent fixture performance and repeat annual energy savings for up to 25 years. Application Since 1994, millions of 2x2 lensed troffer lights and 9 cell parabolic louvers have been successfully de-lamped with Envirobrite troffer kits. These kits are recognized worldwide as the industry leading retrofit kit for the majority of all commercial 2x2 fixtures. It s ideal optics, universal fit configuration and flexible stamped bracketing system allows proper fit in office spaces, classrooms, hospitals, and many other commercial locations. Design Envirobrite kits are designed by our expert in house lighting engineers for ideal photometry and trouble-free installation. Every Envirobrite kit is designed to meet UL 1598B specifications. Integral to ideal kit functionality is the combination of our bracketing system which centers the lamps specifically to the optics of the reflector design. Envirobrite reflectors are fabricated with Energy Planning Associates custom-made multi-stage progressive roll forming machinery. Our unique high speed equipment consistently produces multi-faceted linear fluorescent reflectors within precise quality tolerance. Our process enables us to add additional facets for superior reflector performance significantly reducing production cost and improving lead times. Our rigid, light weight bracketing systems are produced with custom designed stamping dies and are very easy to install. As with all Envirobrite products Cost-A-Mized solutions are available to meet every customer s needs. Primary Features & Benefits Proudly Designed, Made, and Assembled in the USA Utility rebate friendly throughout the U.S. Qualifies for EPACT tax deduction Multi-facet optical design for maximum performance Significant reduction in maintenance costs Superior lighting directly to the work plane Aluminum components generate a rust-free approach to less maintenance and lasting appeal Flexibility for tandem wiring applications Reinforced multi function universal bracketing system LIMITED PRODUCT WARRANTY Energy Planning Associates warrants for a period of 5 years from the date of purchase that all Envirobrite fixtures will be free of defects from manufacturing and workmanship. This warranty excludes damage of any kind resulting from improper installation, misuse, abuse, accidents, or natural disasters. Energy Planning will repair, or at its option, replace the defective product and only when the product is properly handled, installed, and maintained. Quick, Safe, and Labor Efficient Installation Variable tek screw slot locations for multiple mounting options 25 facet reflectors for added rigidity and a sturdy fit Unique bracket design UL approved for no wire guard requirement Less than 2 reflector depth to fit shallow fixtures Lance and form bracket design for easy pinch in reflector installation Toolless ballast access for simple maintenance Snap-in lamp holders won t fall out during overhead installation Rounded-edged brackets to avoid injury during installation Streamlined packaging for easy job site material management 9-3/4 lamp spacing enhances appearance of 18-cell parabolic retrofits Slots, instead of holes, provided for easy end to end bracket to bracket centering With 1/3 the weight of steel aluminum components permit reduced shipping cost and simpler installation 2x2 Kit includes (1) 2200T series aluminum reflector made from your choice of specified material (95%) Enhanced Miro4, 93% Micro Matte, or 92% White (2) 2000 series white-painted stamped aluminum brackets (2, 4 or 6) specified shunted or unshunted high quality chemical resistant thermoplastic body UL approved lamp holders (5) tek screws Made In USA ENERGY PLANNING ASSOCIATES 148 MARITIME DRIVE SANFORD, FLORIDA TOLL FREE

14 PRODUCT LINK CONTACT US Side View Side View Top View Candela Plot 2Lamp T8 Top View ZONAL LUMEN SUMMARY Zone Lumens % Lamp % Luminaire RTR2202T817ENLSS used for test Total Luminaire Optical Efficiency = 75.9% Luminaire Spacing Criterion 0 deg deg Call factory for full photometric report Ordering Information Sample number: RTR2202T817ENLSS Indicates most widely used kit RTR T817 EN LSS FIXTURE DIMENSION LAMP LAMP TYPE REFLECTOR LAMPHOLDER TYPE RTR=Troffer Reflector Kit 22 = 2x2 02 = 2 Lamp T817 = 17 watt EN = 95% Miro4 Enhanced LSS = Short Shunted Twist-Lock 03 = 3 Lamp T524 = 24 watt MN=93% Micro Matte LUS = Short Unshunted Twist Lock 04 = 4 Lamp WN=92% White Aluminum LUP = Unshunted T5 Plunger * Contact the factory for additional adders available including lamps and ballast combination. For added efficiency include high quality T5 or T8 lamps with either instant or programmed start ballasts. Adding an Envirobrite approved motion sensor system to your retrofit project will further enhance energy savings and create an even faster payback. ENERGY PLANNING ASSOCIATES 148 MARITIME DRIVE SANFORD, FLORIDA TOLL FREE

15 CONTACT US RTR TROFFER REFLECTOR KIT 2x4 Troffer Fixture Retrofit Kit Description Envirobrite s RTR Troffer Reflector kits dramatically enhance existing fixture efficiencies creating substantial energy savings with excellent return on investment. All Envirobrite kits have four different specialized material options which offer various light distributions with minimal up-front investments. These kits, in conjunction with numerous ballast and lamp configurations, can easily produce ideal IES recommended light levels with minimized energy consumption. Envirobrite kits will continue to provide consistent fixture performance and repeat annual energy savings for up to 25 years. Application Since 1994, millions of 2x4 lensed troffer lights and 18 cell parabolic louvers have been successfully de-lamped with Envirobrite troffer kits. These kits are recognized worldwide as the industry leading retrofit kit for the majority of all commercial 2x4 fixtures. It s ideal optics, universal fit configuration and flexible stamped bracketing system allows proper fit in office spaces, classrooms, hospitals, and many other commercial locations. Design Envirobrite kits are designed by our expert in house lighting engineers for ideal photometry and trouble-free installation. Every Envirobrite kit is designed to meet UL 1598B specifications. Integral to ideal kit functionality is the combination of our bracketing system which centers the lamps specifically to the optics of the reflector design. Envirobrite reflectors are fabricated with Energy Planning Associates custom-made multi-stage progressive roll forming machinery. Our unique high speed equipment consistently produces multi-faceted linear fluorescent reflectors within precise quality tolerance. Our process enables us to add additional facets for superior reflector performance significantly reducing production cost and improving lead times. Our rigid, light weight bracketing systems are produced with custom designed stamping dies and are very easy to install. As with all Envirobrite products Cost-A-Mized solutions are available to meet every customer s needs. Primary Features & Benefits Proudly Designed, Made, and Assembled in the USA Utility rebate friendly throughout the U.S. Qualifies for EPACT tax deduction Multi-facet optical design for maximum performance Significant reduction in maintenance costs Superior lighting directly to the work plane Aluminum components generate a rust-free approach to less maintenance and lasting appeal Flexibility for tandem wiring applications Reinforced multi function universal bracketing system LIMITED PRODUCT WARRANTY Energy Planning Associates warrants for a period of 5 years from the date of purchase that all Envirobrite fixtures will be free of defects from manufacturing and workmanship. This warranty excludes damage of any kind resulting from improper installation, misuse, abuse, accidents, or natural disasters. Energy Planning will repair, or at its option, replace the defective product and only when the product is properly handled, installed, and maintained. Quick, Safe, and Labor Efficient Installation Variable tek screw slot locations for multiple mounting options 25 facet reflectors for added rigidity and a sturdy fit Unique bracket design UL approved for no wire guard requirement Less than 2 reflector depth to fit shallow fixtures Lance and form bracket design for easy pinch in reflector installation Toolless ballast access for simple maintenance Snap-in lamp holders won t fall out during overhead installation Rounded-edged brackets to avoid injury during installation Streamlined packaging for easy job site material management 9-3/4 lamp spacing enhances appearance of 18-cell parabolic retrofits Slots, instead of holes, provided for easy end to end bracket to bracket centering With 1/3 the weight of steel aluminum components permit reduced shipping cost and simpler installation 2x4 Kit includes (1) 2400 series aluminum reflector made from your choice of specified material (95%) Enhanced Miro4, 93% Micro Matte, or 92% White (2) 2000 series white-painted stamped aluminum brackets (2, 4 or 6) specified shunted or unshunted high quality chemical resistant thermoplastic body UL approved lamp holders (2) Quarter turns (5) tek screws Made In USA ENERGY PLANNING ASSOCIATES 148 MARITIME DRIVE SANFORD, FLORIDA TOLL FREE

16 PRODUCT LINK CONTACT US Side View Side View Candela Plot 2Lamp T8 Top View Top View ZONAL LUMEN SUMMARY Zone Lumens % Lamp % Luminaire RTR2402T832ENLSS used for test Total Luminaire Optical Efficiency = 87.9% Luminaire Spacing Criterion 0 deg deg Call factory for full photometric report Ordering Information Sample number: RTR2402T832ENLSS Indicates most widely used kit RTR T832 EN LSS FIXTURE DIMENSION LAMP LAMP TYPE REFLECTOR LAMPHOLDER TYPE RTR=Troffer Reflector Kit 24 = 2x4 02 = 2 Lamp T832 = 32 watt EN = 95% Miro4 Enhanced LSS = Short Shunted Twist-Lock 03 = 3 Lamp T554 = 54 watt MN=93% Micro Matte LUS = Short Unshunted Twist Lock 04 = 4 Lamp WN=92% White Aluminum LUP = Unshunted T5 Plunger * Contact the factory for additional adders available including lamps and ballast combination. For added efficiency include high quality T5 or T8 lamps with either instant or programmed start ballasts. Adding an Envirobrite approved motion sensor system to your retrofit project will further enhance energy savings and create an even faster payback. ENERGY PLANNING ASSOCIATES 148 MARITIME DRIVE SANFORD, FLORIDA TOLL FREE

17 871 Coronado Center Drive, Suite 200 Henderson, NV (888) Induction Lighting Garage Light Applications: Parking Garages, Canopies, Walkways Product Benefits: Induction Lighting saves 40-75% of Energy High Quality White Light, Instant-On/Restrike CRI > 85, Lm/W 75-90, CCT: 5000K 100,000 hour lifespan Product Features: WATTAGES: 40, 55, 70, 80, 100 GENERATOR: Universal v HOUSING: Die-cast, Powder Coated Aluminum LENS: Prismatic Polycarbonate Lens REFLECTOR: Anodized Aluminum IP RATING: 54 AMBIENT TEMPS: - WR r ) Mounting: Standard - Surface Mount Optional - Pendant Available Options: Photocell, Occupancy Sensor Bi-Level Occupancy Dimming Color Temps: 3000/4000K Custom Paint Warranty: 10 Years Dimensions: Conical - GLC 40-80W Lighting Distribution Square - GLS W Ordering Codes: Ex: ENV-IND-GLS-100 PROJECT: ENV-IND-GL Wattage Mounting Option GLC = Conical 70, 80, 100 SM = Surface PC = Photocell GLS = Square PM = Pendant OS = Occ Sensor BL = Bi-Level Occupancy Dimming CCT = 3K, 4K CP = Custom Paint (specify) PART #: QUANTITY:

18 871 Coronado Center Drive, Suite 200 Henderson, NV (888) Induction Lighting High Bay Reflective Applications: Warehouse, Manufacturing, Gymnasium, Convention Centers Product Benefits: Induction Lighting saves 40-75% of Energy High Quality White Light, Instant-On/Restrike CRI > 85, Lm/W 75-90, CCT: 5000K 100,000 hour lifespan Product Features: GENERATOR: Universal v GEAR BOX: Die-cast, Powder Coated Aluminum LENS: Prismatic Acrylic REFLECTOR: Anodized Faceted Aluminum 22 ( W uses 30 Spun Aluminum Reflector) IP RATING: 20 (Gear Box = 43) WATTAGES: 150, 200, 250, 300, 400 Mounting: Standard - Hook Optional - Pendant Available Options: Occupancy Sensor Bi-level Occupancy Dimming Color Temps: 3000/4000K Cord/Plug (specify Length, NEMA L5/6/7) Wire Guard Safety Cable Warranty: 10 Years Dimensions: Lighting Distribution W (30 ) Ordering Codes: Example: ENV-IND-HBR-250-C6-PL5-WG PROJECT: ENV-IND-HBR- - - Wattage Mounting Option 150, 200, 250 H = Hook OS = Occ Sensor 300, 400 P = Pendant BL = Bi-level Occupancy Dimming C = Cord (length) P = Plug (L5/6/7) WG = Wire Guard SC = Safety Cable PART #: QUANTITY:

19 871 Coronado Center Drive, Suite 200 Henderson, NV (888) Induction Lighting High/Low Bay Prismatic Applications: Warehouse, Manufacturing, Gymnasium, Convention Centers, Retail Product Benefits: Induction Lighting saves 40-75% of Energy High Quality White Light, Instant-On/Restrike CRI > 85, Lm/W 75-90, CCT: 5000K 100,000 hour lifespan Product Features: GENERATOR: Universal v GEAR BOX: Die-cast, Powder Coated Aluminum LENS: Prismatic Polycarbonate REFLECTOR: Prismatic Polycarbonate 22 (16 PC for W) IP RATING: 20 (Gear Box = 43) WATTAGES: 70, 80, 100, , 200, 250 Mounting: Standard - Hook Optional - Pendant Available Options: Occupancy Sensor Bi-Level Occupancy Dimming Color Temps: 3000/4000K Cord/Plug (specify Length, NEMA L5/6/7) Wire Guard Safety Cable Warranty: 10 Years Dimensions: Lighting Distribution Ordering Codes: Example: ENV-IND-HLBP-200-C6-PL5-WG PROJECT: ENV-IND-HLBP - - Wattage Mounting Option 70, 80, 100 H = Hook OS = Occ Sensor 120, 150, 200 P = Pendant BL = Bi-level Occupancy Dimming 250 C = Cord (length) P = Plug (L5/6/7) WG = Wire Guard SC = Safety Cable PART #: QUANTITY: