LIST OF CONTENTS TESTING EQUIPMENT

Size: px

Start display at page:

Download "LIST OF CONTENTS TESTING EQUIPMENT"

Donald Campbell
6 years ago
Views:

Batterytester Milton Batterytester Milton Digital

1 LIST OF CONTENTS TESTING EQUIPMENT Batterytester BBT 305 Batterytester BBT 605 Batterytester BT 301 Batterytester Milton Batterytester Milton Digital Batterytester 500 A2 Forrex tester 12V 420A HSP Printer

BBT 305 BATTERY TESTER The ideal workshop tool As soon as it is attached, the BBT 305 shows the battery s open-circuit voltage and then guides the user by means of a selection menu, which facilitates

Menu selection for new and used batteries Measurement values for AGM batteries OCV measurement The printout header can be defined individually by the user Tests 12V batteries and electric systems in

2 BBT 305 BATTERY TESTER The ideal workshop tool As soon as it is attached, the BBT 305 shows the battery s open-circuit voltage and then guides the user by means of a selection menu, which facilitates the optimum measurement of both new and used batteries. Menu selection for new and used batteries Measurement values for AGM batteries OCV measurement The printout header can be defined individually by the user Tests 12V batteries and electric systems in cars and small transporters Tests the voltage of starter and charger systems and shows the results Reverse polarity safeguard Tests discharged batteries up to a voltage of 1V Compatible with various standard systems (CCA, DIN, EN, IEC, SAE) Tests differing battery types: 12V lead-acid, AGM (web) and gel Model: BBT 305 Art. No.: Temperature range: -18 C to 50 C (0 C 40 C printer) Test range: CCA, SAE, DIN, EN, IEC Integrated printer: current supply through the tested battery Voltage range: 12V batteries with residual voltage of up to 1V Cable length: 533.4mm Current supply: supply via the tested battery and integrated 9V battery Voltmeter: 0 to 30 VDC +/ VDC Languages: 19 Casing material: acid-resistant ABS plastic Dimensions: 230mm x 102mm x 65mm Weight: 499g Thermal paper roll: width 57mm, diameter 47.6mm

BBT 605 BATTERY TESTER The ideal tool for battery retailers The BBT 605 is the optimum tool for the measurement of motorcycle, car and truck batteries.

Menu selection for new and used batteries Quality check for the rapid measurement of several identical batteries Measurement algorithm for motorcycle, car and truck batteries Software updates using a

3 BBT 605 BATTERY TESTER The ideal tool for battery retailers The BBT 605 is the optimum tool for the measurement of motorcycle, car and truck batteries. The entire battery range is measured quickly and comfortably using the quality check mode. The BBT 605 can be kept constantly up to date using the removable memory card. Menu selection for new and used batteries Quality check for the rapid measurement of several identical batteries Measurement algorithm for motorcycle, car and truck batteries Software updates using a removable memory card OCV measurement The printout header can be defined individually by the user Reverse polarity safeguard Tests discharged batteries up to a voltage of 1V Compatible with various standard systems (CCA, DIN, EN, IEC, SAE) Tess various battery types: 12V lead-acid, AGM (web) and gel Model: BBT 605 Art. No.: Temperature range: 0 C to +50 C Test range: CCA, SAE, DIN, EN, IEC Integrated printer: current supply via the tested battery Voltages: 6 and12v batteries Cable length: 122cm Current supply: supply via the tested battery and integrated 9V battery Voltmeter: 0 to 30 Vdc +/ Vdc Languages: 24 Casing material: acid-resistant ABS plastic Dimensions: 270mm x 100mm x 50mm Weight: 771g Thermal paper roll: 57mm x 25.9m

4 BT 301 BATTERY TESTER The BT 301 is a professional device with integrated printer for testing 6 and 12 V batteries. This tester is suitable for lead-acid batteries and if required, can print out the test results immediately. The display and printouts are available in seven languages. An integrated printer provides immediate results for joint scrutiny with the customer. Cold start current testing Suitable for lead-acid starter batteries and AGM Areas of application: cars and motorcycles Display available in 7 languages Compatible with various standards systems (DIN, SAE, EN, IEC) Including integrated printer, impact protection and 4 paper rolls Model: BT 301 Art. No.: Battery voltage: 6 / 12 V Operating voltage: V Test range: SAE, DIN, EN, IEC Cold start current: CCA Operating temperature: 0 C to +50 C Dimensions: 19 x 11 x 4 cm Weight: 610 g Cable length: 80 cm Power supply: 4 x 1.5 V AA batteries Languages: 7 Thermal paper roll: (VE2St.)

5 MILTON BATTERY TESTER The Milton battery tester supplies test results after only 10 seconds. Suitable for batteries of up to approx.100 Ah. For the testing of cold start current, starters and charging circuits. Battery analysis after 10 seconds. The Milton tester delivers rapid battery analyses and is simple to operate. Completes capacity tests For the testing of starters and the charging circuit Allows cold start current testing Suitable for cars and motorcycles For batteries of up to 100 Ah Model: Milton Art. No.: Battery voltage: 6 / 12 V Discharge current: 100 A Testing time: approx. 10 sec Dimensions: 290 x 105 x 75 mm

This information is provided by a 3-level LED display on the device. The Milton Digital supplies rapid battery analyses and is simple to operate.

6 MILTON DIGITAL BATTERY TESTER The Milton digital battery tester delivers test results in just 10 seconds. The Milton Digital shows the charge status and the state of function (SOF) following a 10-second load. This information is provided by a 3-level LED display on the device. The Milton Digital supplies rapid battery analyses and is simple to operate. Microprocessor controlled Digital display Automatic load shutdown after 10 sec. Tests the battery and the charger system For batteries up to 100 Ah Model: Milton Digital Art. No.: Battery voltage: 12 V Discharge current: 100 A Testing time: 10 sec. Dimensions: 290 x 105 x 75 mm

500A2 BATTERY TESTER Load batteries up to 500A The 500A2 tests batteries, starters and dynamos with up to 500A. The battery current and voltage can be read off from two separate displays.

7 500A2 BATTERY TESTER Load batteries up to 500A The 500A2 tests batteries, starters and dynamos with up to 500A. The battery current and voltage can be read off from two separate displays. Voltage and current displays Tests batteries up to 1,000CCA Fully insulated battery clips with copper inserts Tests 12V batteries, dynamos and starters Model: 500A2 Art. No.: Battery voltage: 12V Battery test: up to 1,000 CCA Discharge current: max. 500A Dimensions: 230 x 270 x 125mm

FORREX TESTER 12V 420A The Forrex Tester supplies precise test results and is simple to operate. This device allows the completion of capacity tests and the measurement of cold start current values.

As compared to other testing devices, the Forrex Tester stands out due to its simple handling. Measurement of cold start current RC test (25A, 10.5V final discharge voltage) K20 test (in, 10.

8 FORREX TESTER 12V 420A The Forrex Tester supplies precise test results and is simple to operate. This device allows the completion of capacity tests and the measurement of cold start current values. The menu can be controlled via a digital display and the test values read off directly. The Forrex Tester is suitable for all types of cars and motorcycles. As compared to other testing devices, the Forrex Tester stands out due to its simple handling. Measurement of cold start current RC test (25A, 10.5V final discharge voltage) K20 test (in, 10.5V final discharge voltage) Indication of terminal voltage and running time during capacity testing Display of the results of previous tests Up to four devices can be switched together via the integrated RS 232 interface. Model: Forrex Tester Art. No.: Battery voltage: 12 V Discharge current: A End of charging voltage: 8.4 / 9 / 9.4 / 10 / 10.5 / 11 V Interface: RS232 Dimensions: 260 x 220 x 270 mm Weight: 7,93 kg

The thermoprinter is maintenance-free and equipped with an automatic off function.

9 HSP PRINTER The HSP printer is a compact, lightweight device with infrared interface. The HSP disposes over HP IR, IrDA format infrared interfaces and an RS232 interface. The thermoprinter is maintenance-free and equipped with an automatic off function. Infrared (HP IR, IrDA) and RS 232 interfaces High-speed printer with first class resolution Noiseless Maintenance-free Compact and light Automatic off function Model: GR 1 Art. No.: Voltage: 4x 1.5 Volt AA Interfaces: RS232, HP IR, IrDA Memory: 6 Kbytes Operating temperature range: 0 C C

Heavy-Duty Battery and Electrical System Diagnostic Tester

Sabre Heavy-Duty Heavy-Duty Battery and Electrical System Diagnostic Tester Heavy-duty for 24-volt battery and electrical systems Diagnoses battery packs in series, parallel, or series/parallel Test AGM/gel