Powered Access Rental Fleet Version 12

Transcription

1 Powered Access Rental Fleet Version 12

2 Introduction Introduction This booklet contains a list of all of the powered access platforms that Brand Energy & Infrastructure Services rents as well as useful information. Every day, hundreds of BRAND powered access platforms are used for all kinds of indoor and outdoor activities. BRAND has a very new, very well maintained, rental fleet.we not only carry a large number of the most common models but also many unique models. All of the powered access platforms and their technical specifications can also be found in BRAND's powered access rental app, which contains the full current range of rental equipment, making it easy to select and order directly a platform. The app runs on ios and Android and can be downloaded from the respective app stores by entering the search term BRAND ENERGY. The first pages of this booklet contain general information about all other services we offer. Brand Energy & Infrastructure Services B.V. +31 (0) nl@beis.com 1

3 Powered Access Rental Fleet Version 12, May 2017 Code: Brand Energy & Infrastructure Services B.V. All rights reserved. Nothing in this publication may be reproduced, stored in an automated database or published in any form, either electronically, mechanically, by photocopies, recordings or otherwise without prior written permission from Brand Energy & Infrastructure Services B.V. All data relating to powered access platform specifications are based on factory data. Exceptions reserved. The content of this booklet was produced with the utmost care. Brand Energy & Infrastructure Services B.V. and its operating companies are not liable for information that is incomplete or incorrect. Creation and graphic design: Etteplan 2

4 Introduction 1 Colophon 2 Introduction BRAND 5 Training course Platform operator 12 Rental rate for powered access platform systems 14 Choosing the right equipment 18 Legend 19 Scissor lifts 21 Special, spider lifts 43 Specials, hybrid articulating boom lifts 47 Telescopic and articultingboom lifts 53 Truck mounted boom lifts 83 Additional Rental Terms 87 Our Locations 95 Rental offices 97 Technical Service 97 Regional and logistics offices

5 4

6 Introduction Introduction to Brand Energy & Infrastructure Services Introduction to Brand Energy & Infrastructure Services B.V. Market leader Brand Energy & Infrastructure Services B.V is the market leader in specialised services for the energy, infrastructure and industrial sector. BRAND is an international company that delivers workplaces at a height, provides preventive corrosion maintenance, coating, (fireproof) insulation, fireproofing, mechanical services, support, formwork and additional specialist services. BRAND is a strong service provider in industry and construction with more than 350 offices in over 30 countries and headquarters in the United States. In the Netherlands, BRAND has been synonymous with safe and efficient workplaces at a height for more than 80 years. We have a strong position in the rental market for scaffolding systems, powered access platforms and mast climbers. We can also maintain, inspect and service your own climbing equipment. BRAND also assembles all of the equipment. BRAND is your designated partner for multidisciplinary services (insulation/total access/preservation) in industrial settings. Guaranteed quality In the Benelux, Brand Energy & Infrastructure Services is certified in accordance with ISO 9001, ISO 14001, OHSAS 18001, SCC Petrochemical, SC-530 (asbestos removal) and MVO Prestatieladder. 5

7 Introduction Introduction to Brand Energy & Infrastructure Services Reliable and high quality Whether your project is new build, renovation, finishing, installation or maintenance, BRAND has a solution to create a safe workplace at height for every phase of your project. BRAND is a reliable partner in the design and execution of the most varied scaffolding structures in every application area: From construction to finishing, shipbuilding to bridge preservation, industrial, petrochemical and infrastructure projects, to the renovation of natural gas extraction plants and drilling platforms. BRAND always delivers the highest quality. A partner for every kind of work BRAND is the only company that has the in-house knowledge, expertise, equipment and manpower to make your workplace accessible in the best and most economical way. Objectivity and your interests are key. You can also choose the solution that meets your needs best from our wide range of options. Total Access our total formula, your savings BRAND's Total Access solutions are especially suited for industrial sites with continual maintenance and new-build activities, and big new-build sites. With BRAND, you will never need more than one supplier for all your scaffolding and powered access platforms. Using the right equipment at the right place will enable you to save significantly on your total budget. 6

8 Introduction Introduction to Brand Energy & Infrastructure Services Powered access platforms Whatever type of powered access platform you need, you will always find the best fit at BRAND. BRAND has a very comprehensive, continually updated program of rental powered access platforms. You can choose from scissor lifts, articulating boom lifts and telescopic boom lifts. You will also find specialist equipment in our fleet of powered access platforms. Spider lifts, truck mounted lifts, powered access with extra wide platforms and many other unique configurations. Aluminium scaffolding For work that requires extremely mobile equipment, BRAND suggests Handy s aluminium mobile scaffolding solution. This sturdy scaffolding complies with the NEN 2718 standard and is available as mobile scaffolding, folding scaffolding and stair towers. Very suitable for all your installation, façade and renovation work. Aluminium stair towers BRAND's aluminium stair towers are safe, easy to assemble and suitable for every project. Adding a stair tower to your construction project makes it easier to work at different levels and increases safety. BRAND carries different models that are adjusted to the size of the scaffolding project. You can choose from stairs in combination with a scaffold or a separate stair tower in different formats, heights and widths. Our stair towers are also extremely suitable as emergency or access stairs. The stairs are easy to assemble and improve the ergonomics of the work site by creating enough safe walking space. 7

9 Introduction Introduction to Brand Energy & Infrastructure Services Steel scaffolding Well begun is half done. That's why both the small and the big jobs are always done with Cuplok. This modular scaffolding and support system is multifunctional and used, among other things, in apartment and utility construction, infrastructure and industry projects. By adding new parts and using lighter material, BRAND is constantly creating new applications with Cuplok. It is often used for renovation scaffolding, façade scaffolding, masonry scaffolding, support and stair towers. Mast climbers Mast climbers are a safe solution when safe access is required. BRAND has a fleet of mast climbers that will match your specific project. Mast climbers are interesting for projects with a fixed workplace. Their adjustability means that you can work at any height. The standard working width of the working platform is 1.6 m and can be extended by 1.0 m toward the façade. The working platform is then 2.6 m wide. The mast climber is a very HSE friendly workplace. The double mast version has a lifting capacity up to 3,000 kg. In poor weather conditions, the scaffold should be covered by a roof. 8

10 Introduction Introduction to Brand Energy & Infrastructure Services Rope access Rope access is a way of accessing high work areas with ropes, climbing belts and other equipment. BRAND works exclusively with IRATA (Industrial Rope Access Trade Association) and VCA-certified specialists. BRAND has its own project management team and puts together the rope access team according to the expertise required. In addition to standard work, such as insulating, painting and tracing, rope access is also used in welding, grinding, cabling, sealing, assembly work, industrial cleaning, (non-destructive) inspections, mains repairs and modifications. The materials and equipment that we use meet all of the highest standards. Brand Access Manager The online 'Brand Access Manager' enables you to determine the most efficient solution for a safe workplace at height. After you've entered some basic information, the tool will display the solution that is best for your situation and how much you can save. The tool has been implemented in such a way that the selected products are automatically ordered and scheduled. The tool also saves log files and reports so you can see how much and where you saved. 9

11 Introduction Introduction to Brand Energy & Infrastructure Services Thermal insulation BRAND has a solution for every situation that requires temperature control. We insulate cryogen labs from -196 C to very hot installations with extremely high temperatures of more than C with materials such as polymers, elastomers and rock wool products. All materials meet the current standards and safety requirements. BRAND is familiar with the whole process from design and calculation through to execution and maintenance. Acoustic insulation BRAND has different ways of creating a relatively quiet work environment, including the installation of housings, screens, dampers and baffles. We have our own workshops, so customisation isn't a problem. Our own sound analyses and designs are the basis. By combining different measures, we can solve almost every sound problem. Also in special situations. Fireproofing BRAND has developed a system that reduces the risk of fire spreading (compartmentalisation). We map out all of the ducts and ensure the correct insulation is installed. During inspections, existing ducts are inspected and if necessary upgraded; new ducts are secured. In addition, we also provide fireproofing, among other things by applying fireproof mortar to ground plates and load-bearing structures. 10

12 Introduction Introduction to Brand Energy & Infrastructure Services Tracing In many of today's production processes, it is essential that gas, liquid and solid matter are transported through pipelines at a constant temperature. The tolerances are often minute. BRAND uses tracing in every imaginable industry, from petrochemical to food. This has enabled us to gain a lot of experience in creating and implementing customised solutions. We closely align insulation and tracing with each other to ensure optimal temperature control. Blasting and preservation Preservation is the basis of your installation's lifetime. Corrosion is an insidious danger that can cause huge problems, especially under insulation. BRAND has the knowledge to guarantee that this work is carried out at the highest quality. In this multidisciplinary approach, BRAND is the main contractor and is responsible for all activities: the delivery of safe workplaces at height, the removal and installation of insulation, and shot blasting and paint work. Asbestos removal BRAND is certified in accordance with SC-530 and is one of the companies in the Netherlands that is authorised to remove asbestos. Material containing asbestos is removed according to a very strict procedure. BRAND's asbestos removal team is DTA (expert asbestos removal supervisor) and DAV (expert asbestos remover) certified. BRAND has its own material and equipment, in part Ex-proof, for the removal of asbestos. The fleet includes: mobile decontamination units, negative pressure air filtration machines, monitors, portable showers and vacuum cleaners. 11

13 Introduction Training course Platform Operator Tüv The course covers all of the courant powered r access platforms. A practical test is done in a ieach category, whereby each category nrepresents a type of powered access platform: i n gcategory 1A Vertical working, one-man powered access c oplatforms with stabilisers u r s Category 1B etelescopic/articulating boom lifts, trailermounted boom lifts, truck-mounted boom lifts or spider lifts with stabilisers. P l acategory 3A tself-propelled scissor lifts and self-propelled f one-man vertical lifts. o r mcategory 3B OSelf-propelled telescopic and articulating boom plifts with jib. e r athis is a one-day course that consists of theory tand practice. Both courses end with a test. o r Experience using powered access platforms is not necessary. Participants will receive a Tcertificate upon successful completion. ü v Code 95: The access platform operator training course gives you 7 hours towards your CCV refresher course. For Code 95, the participant's information must be provided to our planning department no later than 5 working days before the course starts. BRAND subscribes and unsubscribes course participants in the CCV system. Training program The course starts at 8.30 a.m. and lasts until about 4.30 p.m. and consists of the following modules: Introduction Theory Theory test Lunch Individual practical test Other training information The cost per participant includes training material, tests, certificates. The training is performed on site at BRAND's Central Equipment Service. A 2-day course is available on request for participants with no hands-on experience. On request, we can also give the course at your company or at a location specified by you. Prices on request Register Contact us by calling or verhuur.nl@beis.com 12

14 i i I l Introduction Training course - IPAF - SSVV/SOG access platform operator T r abrand offers an IPAF training program for n n g c oaccess platform operators as well as an SSVV/ u r s e -SOG training program specifically for the P A F -(petro) chemical industry. The latter is for S S V V / S Opeople working in the (petro) chemical industry. G a c c e sa practical test is done in each category, s p whereby each category represents a type of powered access platform: a t f o r m o p e r a t o r Category 1B Telescopic/articulating boom lifts, trailermounted boom lifts, truck mounted boom lifts or spider lifts with stabilisers. Category 3A Self-propelled scissor lifts and self-propelled one-man vertical lifts. Category 3B Self-propelled telescopic and articulating boom lifts with jib. Training program The course starts at 8.30 a.m. and lasts until about 4.30 p.m. and consists of the following modules: Introduction Theory Theory test Lunch Individual practical test Other training information The cost per participant includes training material, tests, certificates. The training is performed on site at BRAND's Central Equipment Service. A 2-day course is available on request for participants with no hands-on experience. On request, we can also give the course at your company or at a location specified by you. Prices on request The SSVV/SOG training course is VCAcertified and valid for 5 years. Note: The 1-day SOG-certification course requires participants to have ample hands-on or work experience. The participants take an individual practical test, which leaves little time for hands-on instruction and practice. IPAF training (International Powered Access Federation) is a one-day training course with theory and handson training. Participants will receive a certificate for each category upon successful completion of a training course. Register Contact us by calling or verhuur.nl@beis.com 13

15 Rental rate for powered access platform systems Valid from January 2017, excluding VAT Scissor lifts - electric Rental rate for powered access platform systems Type Work h. Platform Cap. Width Own wght Day Week JLG 1230 ES x JLG 1930 ES x , Genie GS x , JLG 2032 ES x , Genie GS x , Genie GS x , JLG 2646 ES x , Genie GS x , JLG 3246 ES x , Genie GS 3268 DC x , JLG 3369 LE x , JLG 3369 LE x , Genie GS 4047 DC x , Genie GS 4069 DC x , JLG 4069 LE x , Holland Lift Q x , for indoor use only 2. with stabilisers Scissor lifts - diesel, 4-wheel drive Type Work h. Platform Cap. Width Own wght Day Week Genie GS 3268 RT x , Genie GS 3384 RT 1, x 1.8 1, , Genie GS 4069 RT x , Genie GS 5390 RT 1, x , , x4 with stabilisers 2. megadeck Specials, spider lifts and hybrid articulating boom lifts Type Work h. Reach Art h. Width Own wght Day Week JLG X 17 J Plus , ,250 Niftylift HR 17 Hybrid , ,175 Niftylift HR 21 Hybrid , ,450 Niftylift HR 28 Hybrid ,650 1,125 2, track 2. 4x4 14

16 Rental rate for powered access platform systems Telescopic and articulating boom lifts - diesel, track and 4x4 Type Work h. Reach Art h. Width Own wght Day Week JLG 340 AJ 1, , Genie Z 34/22 RT , JLG 450 AJ SII 1, , Genie Z 45/25 J RT , JLG 460 SJ 1, , Genie Z 51/30 J RT , JLG 520 AJ , Genie Z 60/34 RT , ,135 JLG 600 AJ , ,135 Genie S 65 type II , ,175 JLG 660 SJ 1, , ,175 Haulotte HT 23 RTJ , ,325 JLG 800 AJ , ,850 Genie Z 80/60 4x4x , ,850 Genie S 85 type II 1, , ,925 JLG 860 SJ 1, , ,925 Genie S ,250 1,125 2,975 Genie Z 135/70 4x4x ,500 1,550 3,650 JLG 1350 SJP ,400 1,500 3,600 JLG 150 HAX ,000 1,800 4, generator 3. 4x4 jib Basket capacity most types: ca 220 kg 2. 4x4x4 jib 4. 4x4x4 Articulating boom lifts - electric Type Work h. Reach Art h. Width Own wght Day Week Haulotte Star , JLG E 300 AJP , Genie Z 33/18 MP , Genie Z 34/22 N , Genie Z 40/23 N RJ , JLG E 450 AJ , Genie Z 45/25 J DC , jib 2. jib plus (also rotates horizontally) Basket capacity all types ca 230 kg Truck mounted boom lifts Type Work h. Reach Art h. Width Own wght Day Week CMC PLA , ,400 15

17 Rental rate for powered access platform systems Valid from January 2017, excluding VAT Aluminium mobile scaffolding in accordance with NEN 2718, narrow and wide Description Work h. Platform h. week Mobile scaffolding Aluminium mobile scaffolding is suitable for free-standing use up to 10 m working height (8 m platform height) and for free-standing use indoors up to 14 m working height (12 m platform height). Higher towers must be properly anchored (material not included) The composition is in accordance with NEN 2718, incl 4 stabilisers, working platform with side panels and double guard rail. Rest platforms every 4 meters with double guard rail and without side panels. Length 2.50 m, on request also 1.8 or 3.1 m. Width options 0.7 or 1.3 m. Folding scaffolding only in 1.8 x 0.7 m. Platform extra 5 Folding scaffolding Folding scaffolding with guard rail Prices for longer rental period: on request Aluminium stair towers, excluding anchors Type Exit height Length Width week Handy in accordance with NEN m 1.3 m 93 Handy in accordance with NEN m 1.3 m 112 Handy in accordance with NEN m 1.3 m 141 Handy in accordance with NEN m 1.3 m 165 Handy in accordance with NEN m 1.3 m 194 Handy in accordance with NEN m 1.3 m 223 Assembly and disassembly of stair towers on request. Material lifts, aluminium walking platforms, ladders and stairs Description week Material lift 300 kg up to 7.5 m Walking platform per m, excl guard rail 2 5 Walking platform per m, single-side guard rail 2 6 Walking platform per m, double-side guard rail 2 7 Ladders 2-part up to 7 m 3 50 Ladders 3-part up to 8.5 m 3 70 Stairs up to 12 steps Material lift, on wheels, with hand winch. 2 Aluminium walking platforms are 60 cm wide. Guard rail consists of knee and hip rails. 3 Aluminium ladders, industrial quality. Reforming and retractable ladders available. 4 Aluminium stairs, industrial quality. 16

18 Rental rate for powered access platform systems Accessories Description week Plastic road mats 100 x 300 cm, per 6 (only with powered access platform) 60 Roof edge protection Description Equipped with foldable supports per m1 week 4 (at least 50.00/week) Modular mast climber systems Description MSHF single mast, platform length up to 10.3 m. Ask about freestanding options 1 MCM or MSHF single mast, platform length up to 10.4 m. Lifting capacity max 1,500 kg 2 MCM or MSHF double mast, platform length up to 32.6 m. Lifting capacity max 3,000 kg 2 1 On chassis. 2 On ground frame. Transport prices Description /run vice versa Powered access platforms Powered access platform up to 10 m working height Powered access platform 10 to 21 m working height Powered access platform 21 to 30 m working height Powered access platform 30 m working height (except for JLG 150 HAX) Light Access Aluminium mobile scaffolding* Material lifts up to 300 kg Stairs Ladders Folding scaffolding with guard rail Plastic road mats (free delivery in combination with powered access platform) The transport prices are valid in the Netherlands (except the Wadden Islands and Zeelandic Flanders) and for a delivery period of at least 2 full working days. Loading and unloading beside the vehicle with the renter's help is included. Different prices apply for raised loading docks. Prices for urgent orders and different loading and unloading locations and/or times are agreed on a case-by-case basis. Transport prices and ad hoc rental are always based on time and material. *Mobile scaffolding above 10 m working height 45.- handling fee. 17

19 i i i Introduction Choosing the right equipment C h o othe key features of the numerous powered s n g t haccess platforms that we carry in our rental fleet e r g h tare illustrated and described in: e q u p m a reach diagram (if applicable), e n t a side view, three groups of data (specifications, dimensions and traction). A number of features are also specified in the margin by an icon. The abbreviation N.S. stands for 'Not Specified'. (and the reach diagram) The specifications provide detailed information about the powered access platform. This information will help you determine whether the powered access platform has enough reach and capacity to meet the project's requirements. Most scissor lifts have a platform that can be extended in several steps. The maximum extension is specified in the tables. This information enables you to determine whether the selected machine can be used at the work site or whether you have to select another machine due to height clearance, for example. Here, you will find everything you need to know about power sources and drive systems. This information will help you determine whether the machine is suitable for your indoor project or the terrain for your outdoor project. Icons Icons are used in the margins to make it easier for you to select a product when browsing the booklet. Please refer to page 19 for a list of the icons and their descriptions. Advice Wizard An Advice Wizard to help you select the right powered access platform is available on our website: The wizard will generate a list of types of powered access platforms that are suitable for your project based on how you answer the questions. You can print the information for the suggested platforms or book the type you need by sending us an . Call us for expert advice BRAND's free specialist advice and support add unrivalled value to your project. Please do not hesitate to ask for our specialists, who know exactly which powered access platform or alternative is the best for your project. Contact our rental offices South East and South West Tel: +31 (0) North East and North West Tel: +31 (0)

20 Introduction Legend Icons L e g e n d The following icons indicate the powered access platforms' most important features. standard jib (up to ca 90 ) battery positive jib (up to ca 145 ) wind allowed (max12 m/s) rotating jib (jib plus) only indoor use, no wind allowed spider 4-wheel steering hybrid 4-wheel drive diesel stabilisers electric crawler 19

21 20

22 Scissor lifts

23 Scissor lifts (self-propelled) JLG 1230 ES 5.6 JLG 1230 ES Max working height (m) 5.6 Max platform height (m) 3.6 Min platform height (m) 0.5 Max platform dim. (L x W; m) 1.2 x 0.7 Min platform dim. (L x W; m) 1.2 x 0.7 Platform shifting (m) - Platform extension (m) - Lifting capacity (kg) 230 Non-marking tyres Wind allowed (max 12 m/s) 1 person Transport width (m) 0.76 Transport height (m) 1.6 Transport length (m) 1.4 Unladen weight (kg) 790 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 7 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle - Day 115 Week 230 Very low platform height Drives with person on it through doorways Fits in a lot of lifts Limited use in wind (max 1 person) 23

24 Scissor lifts (self-propelled) JLG 1930 ES 7.7 JLG 1930 ES Max working height (m) 7.7 Max platform height (m) 5.7 Min platform height (m) 0.8 Max platform dim. (L x W; m) 2.7 x 0.7 Min platform dim. (L x W; m) 1.8 x 0.7 Platform shifting (m) - Platform extension (m) 0.9 Lifting capacity (kg) 230 Non-marking tyres Wind allowed (max 12 m/s) 1 person Transport width (m) 0.76 Transport height (m) 1.9 Transport length (m) 1.8 Unladen weight (kg) 1,565 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 9 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 115 Week 235 Very small turning radius Limited use in wind (max 1 person) Narrow chassis, fits through most standard doorways, halls Railing foldable up to a height of

25 Scissor lifts (self-propelled) Genie GS Genie GS 1932 Max working height (m) 7.8 Max platform height (m) 5.8 Min platform height (m) 1.0 Max platform dim. (L x W; m) 2.5 x 0.7 Min platform dim. (L x W; m) 1.6 x 0.7 Platform shifting (m) - Platform extension (m) 0.9 Lifting capacity (kg) 227 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 0.81 Transport height (m) 1.8 Transport length (m) 1.8 Unladen weight (kg) 1,500 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 6 Gradeability (%) 30 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 115 Week 235 Very small turning radius Limited use in wind (max 1 person) 25

26 Scissor lifts (self-propelled) JLG 2032 ES 8.1 JLG 2032 ES Max working height (m) 8.1 Max platform height (m) 6.1 Min platform height (m) 1.1 Max platform dim. (L x W; m) 3.2 x 0.7 Min platform dim. (L x W; m) 2.3 x 0.7 Platform shifting (m) - Platform extension (m) 0.9 Lifting capacity (kg) 360 Non-marking tyres Wind allowed (max 12 m/s) 1 person Transport width (m) 0.81 Transport height (m) 2.2 Transport length (m) 2.3 Unladen weight (kg) 1,970 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 9 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 115 Week 235 Quiet machine for even indoor and outdoor surfaces Narrow chassis, fits through most standard doorways, halls Very small turning radius 26

27 Scissor lifts (self-propelled) Genie GS Genie GS 2046 Max working height (m) 8.1 Max platform height (m) 6.1 Min platform height (m) 1.0 Max platform dim. (L x W; m) 3.3 x 1.2 Min platform dim. (L x W; m) 2.3 x 1.2 Platform shifting (m) - Platform extension (m) 1.0 Lifting capacity (kg) 544 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.17 Transport height (m) 1.6 Transport length (m) 2.4 Unladen weight (kg) 1,940 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 10 Gradeability (%) 30 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 135 Week 285 Very small turning radius Big lifting capacity 27

28 Scissor lifts (self-propelled) Genie GS Genie GS 2632 Max working height (m) 9.9 Max platform height (m) 7.9 Min platform height (m) 0.9 Max platform dim. (L x W; m) 3.2 x 0.8 Min platform dim. (L x W; m) 2.3 x 0.8 Platform shifting (m) - Platform extension (m) 0.9 Lifting capacity (kg) 227 Non-marking tyres Wind allowed (max 12 m/s) no Transport width (m) 0.81 Transport height (m) 1.9 Transport length (m) 2.4 Unladen weight (kg) 1,960 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 9 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 175 Week 375 Very small turning radius 28

29 Scissor lifts (self-propelled) JLG 2646 ES 9.9 JLG 2646 ES Max working height (m) 9.9 Max platform height (m) 7.9 Min platform height (m) 1.2 Max platform dim. (L x W; m) 3.7 x 1.1 Min platform dim. (L x W; m) 2.5 x 1.1 Platform shifting (m) - Platform extension (m) 1 Lifting capacity (kg) 450 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.17 Transport height (m) 1.9 Transport length (m) 2.5 Unladen weight (kg) 2,740 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 13 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 150 Week 350 Very small turning radius 29

30 Scissor lifts (self-propelled) Genie GS Genie GS 2646 Max working height (m) 9.9 Max platform height (m) 7.9 Min platform height (m) 1.2 Max platform dim. (L x W; m) 3.3 x 1.2 Min platform dim. (L x W; m) 2.3 x 1.2 Platform shifting (m) - Platform extension (m) 1.0 Lifting capacity (kg) 454 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.17 Transport height (m) 1.8 Transport length (m) 2.4 Unladen weight (kg) 2,100 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 10 Gradeability (%) 30 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 150 Week 350 Very small turning radius 30

31 Scissor lifts (self-propelled) JLG 3246 ES 11.7 JLG 3246 ES Max working height (m) 11.7 Max platform height (m) 9.7 Min platform height (m) 1.3 Max platform dim. (L x W; m) 3.7 x 1.1 Min platform dim. (L x W; m) 2.5 x 1.1 Platform shifting (m) - Platform extension (m) 1.2 Lifting capacity (kg) 320 Non-marking tyres Wind allowed (max 12 m/s) 1 person Transport width (m) 1.17 Transport height (m) 2.2 Transport length (m) 2.5 Unladen weight (kg) 2,905 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 13 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 250 Week 550 Very small turning radius Limited use in wind 31

32 Scissor lifts (self-propelled) Genie GS 3268 DC 11.8 Genie GS 3268 DC Max working height (m) 11.8 Max platform height (m) 9.8 Min platform height (m) 1.3 Max platform dim. (L x W; m) 4.0 x 1.6 Min platform dim. (L x W; m) 2.5 x 1.6 Platform shifting (m) - Platform extension (m) 1.5 Lifting capacity (kg) 454 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.73 Transport height (m) 1.8 Transport length (m) 2.7 Unladen weight (kg) 3,630 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 19 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle - Day 250 Week 585 Tyres 30 cm wide Low ground pressure Suitable for use with load bearers 32

33 Scissor lifts (self-propelled) Genie GS 3268 RT 11.8 Genie GS 3268 RT Max working height (m) 11.8 Max platform height (m) 9.8 Min platform height (m) 1.3 Max platform dim. (L x W; m) 4.0 x 1.6 Min platform dim. (L x W; m) 2.5 x 1.6 Platform shifting (m) - Platform extension (m) 1.5 Lifting capacity (kg) 454 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 1.73 Transport height (m) 1.8 Transport length (m) 3.3 Unladen weight (kg) 3,950 Turning radius outside (m) 3.7 diesel Stabilisers Ground clearance (cm) 19 Gradeability (%) 35 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle - Day 275 Week 655 Automatic levelling stabilisers Up to 6.6 degrees longitudinal Up to 10.6 degrees transversal 33

34 Scissor lifts (self-propelled) JLG 3369 LE 12.1 JLG 3369 LE Max working height (m) 12.1 Max platform height (m) 10.1 Min platform height (m) 1.7 Max platform dim. (L x W; m) 3.8 x 1.7 Min platform dim. (L x W; m) 2.9 x 1.7 Platform shifting (m) 0.91 Platform extension (m) Lifting capacity (kg) 450 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.75 Transport height (m) 2.0 Transport length (m) 3.7 Unladen weight (kg) 4,600 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 20 Gradeability (%) 35 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle - Day 250 Week 610 Self-closing gate 34

35 Scissor lifts (self-propelled) JLG 3369 LE with stabilisers 12.3 JLG 3369 LE with stabilisers Max working height (m) 12.3 Max platform height (m) 10.3 Min platform height (m) 1.7 Max platform dim. (L x W; m) 3.8 x 1.7 Min platform dim. (L x W; m) 2.9 x 1.7 Platform shifting (m) 0.9 Platform extension (m) Lifting capacity (kg) 450 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.75 Transport height (m) 2.0 Transport length (m) 3.7 Unladen weight (kg) 4,910 Turning radius outside (m) VDC Stabilisers Ground clearance (cm) 20 Gradeability (%) 35 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4 Oscillating axle Day 250 Week 610 Self-closing gate 35

36 Scissor lifts (self-propelled) Genie GS 3384 RT MegaDeck 12.1 Genie GS 3384 RT MegaDeck Max working height (m) 12.1 Max platform height (m) 10.1 Min platform height (m) 1.6 Max platform dim. (L x W; m) 7.4 x 1.8 Min platform dim. (L x W; m) 4.8 x 1.8 Platform shifting (m) - Platform extension (m) 2 x 1.8 Lifting capacity (kg) 1,135 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.13 Transport height (m) 2.7 Transport length (m) 4.9 Unladen weight (kg) 6,650 Turning radius outside (m) 5.9 diesel Stabilisers Ground clearance (cm) 33 Gradeability (%) 50 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle Day 375 Week 775 Automatic levelling stabilisers 36

37 Scissor lifts (self-propelled) Genie GS 4047 DC 13.7 Genie GS 4047 DC Max working height (m) 13.7 Max platform height (m) 11.7 Min platform height (m) 1.34 Max platform dim. (L x W; m) 3.2 x 1.2 Min platform dim. (L x W; m) 2.3 x 1.2 Platform shifting (m) - Platform extension (m) 0.95 Lifting capacity (kg) 350 Non-marking tyres Wind allowed (max 12 m/s) no Transport width (m) 1.2 Transport height (m) 1.9 Transport length (m) 2.5 Unladen weight (kg) 3,221 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 10 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle Day 350 Week 750 Small turning radius 37

38 Scissor lifts (self-propelled) Genie GS 4069 DC 14.1 Genie GS 4069 DC Max working height (m) 14.1 Max platform height (m) 12.1 Min platform height (m) 1.65 Max platform dim. (L x W; m) 4.3 x 1.6 Min platform dim. (L x W; m) 2.8 x 1.6 Platform shifting (m) - Platform extension (m) 1.5 Lifting capacity (kg) 363 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.75 Transport height (m) 2.1 Transport length (m) 3.1 Unladen weight (kg) 5,202 Turning radius outside (m) VDC Stabilisers Ground clearance (cm) 24 Gradeability (%) 35 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 7 Oscillating axle - Day 405 Week 815 Low ground pressure Automatic levelling stabilisers 38

39 Scissor lifts (self-propelled) Genie GS 4069 RT 14.1 Genie GS 4069 RT Max working height (m) 14.1 Max platform height (m) 12.1 Min platform height (m) 1.6 Max platform dim. (L x W; m) 4.3 x 1.6 Min platform dim. (L x W; m) 2.8 x 1.6 Platform shifting (m) - Platform extension (m) 1.5 Lifting capacity (kg) 363 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 1.75 Transport height (m) 2.1 Transport length (m) 3.2 Unladen weight (kg) 5,136 Turning radius outside (m) 4.6 diesel Stabilisers Ground clearance (cm) 24 Gradeability (%) 35 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5.6 Oscillating axle Day 385 Week 795 Low ground pressure Automatic levelling stabilisers 39

40 Scissor lifts (self-propelled) JLG 4069 LE 14.2 JLG 4069 LE Max working height (m) 14.2 Max platform height (m) 12.2 Min platform height (m) 1.7 Max platform dim. (L x W; m) 4.2 x 1.7 Min platform dim. (L x W; m) 2.9 x 1.7 Platform shifting (m) - Platform extension (m) 1.2 Lifting capacity (kg) 360 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.75 Transport height (m) 2.0 Transport length (m) 3.1 Unladen weight (kg) 5,275 Turning radius outside (m) VDC Stabilisers Ground clearance (cm) 13 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle Day 405 Week 815 Low ground pressure Available with and without stabilisers 40

41 Scissor lifts (self-propelled) Holland Lift Q135 EL Holland Lift Q135 EL 18 Max working height (m) 15.3 Max platform height (m) 13.5 Min platform height (m) 1.9 Max platform dim. (L x W; m) 6.0 x 1.8 Min platform dim. (L x W; m) 4.2 x 1.8 Platform shifting (m) - Platform extension (m) 1.8 Lifting capacity (kg) 500 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.80 Transport height (m) 2.3 Transport length (m) 4.6 Unladen weight (kg) 7,280 Turning radius outside (m) VDC Stabilisers - Ground clearance (cm) 12 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 2 Oscillating axle - Day 430 Week 875 Suitable for use with load bearers 41

42 Scissor lifts (self-propelled) Genie GS 5390 RT MegaDeck 18.2 Genie GS 5390 RT MegaDeck Max working height (m) 18.2 Max platform height (m) 16.2 Min platform height (m) 2.0 Max platform dim. (L x W; m) 7.4 x 1.8 Min platform dim. (L x W; m) 4.4 x 1.8 Platform shifting (m) - Platform extension (m) 2 x 1.5 Lifting capacity (kg) 680 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.30 Transport height (m) 2.5/3.2 Transport length (m) 4.9 Unladen weight (kg) 8,800 Turning radius outside (m) 5.4 diesel Stabilisers Ground clearance (cm) 36 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 8 Oscillating axle Day 500 Week 1,025 Automatic levelling stabilisers 42

43 Special, spider lifts

44 Specials, spider lifts JLG X 17 J Plus 17.0 JLG X 17 J Plus Max working height (m) 17.0 Max platform height (m) 15.0 Max lateral outreach (m) 7.7 Max up-and-over clearance (m) 7.8 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) 180 Platform rotation (degrees) 124 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.3 x 0.7 Lifting capacity (kg) 230 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 0.79 Height - retracted (m) 2.0 Length - retracted (m) 4.5 Unladen weight (kg) 2,230 Turning radius outside (m) 1.9 diesel+230v Ground clearance (cm) Gradeability (%) 28 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) Oscillating axle - Day 520 Week 1,250 Generator 45

45 46

46 Specials, hybrid articulating boom lifts

47 Specials, hybrid articulating boom lifts (self-propelled) Niftylift HR 17 Hybrid 4x Niftylift HR 17 Hybrid 4x4 Max working height (m) 17.0 Max platform height (m) 15.0 Max lateral outreach (m) 8.5 Max up-and-over clearance (m) 7.0 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 150 Platform rotation (degrees) 100 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.8 x 0.9 Lifting capacity (kg) 225 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 2.00 Height - retracted (m) 2.2 Length - retracted (m) 5.0 Unladen weight (kg) 4,750 Turning radius outside (m) 4.5 diesel + hybrid 35 kw Ground clearance (cm) 19 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) no Max speed (km/h) 5 Oscillating axle Day 515 Week 1,175 Batteries/diesel hybrid drive system Catalytic converter to clean flue gas Spark arrester 49

48 Specials, hybrid articulating boom lifts (self-propelled) Niftylift HR 21 Hybrid 4x Niftylift HR 21 Hybrid 4x4 Max working height (m) 21.0 Max platform height (m) 19.0 Max lateral outreach (m) 12.8 Max up-and-over clearance (m) 7.0 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 150 Platform rotation (degrees) 100 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.8 x 0.9 Lifting capacity (kg) 225 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 2.27 Height - retracted (m) 2.2 Length - retracted (m) 6.7 Unladen weight (kg) 6,500 Turning radius outside (m) 4.0 diesel + hybrid 35 kw Ground clearance (cm) 17 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) no Max speed (km/h) 4.5 Oscillating axle Day 695 Week 1,450 Batteries/diesel hybrid drive system Catalytic converter to clean flue gas Spark arrester 50

49 Specials, hybrid articulating boom lifts (self-propelled) Niftylift HR 28 Hybrid 4x Niftylift HR 28 Hybrid 4x4 Max working height (m) 28.0 Max platform height (m) 26.0 Max lateral outreach (m) 19.0 Max up-and-over clearance (m) 9.0 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) 150 Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 280 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 2.49 Height - retracted (m) 2.7 Length - retracted (m) 9.3 Unladen weight (kg) 14,650 Turning radius outside (m) 5.9 diesel + hybrid 35 kw Ground clearance (cm) 30 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) no Max speed (km/h) 5 Oscillating axle Day 1,125 Week 2,350 Batteries/diesel hybrid drive system Catalytic converter to clean flue gas Spark arrester 51

50 52

51 Telescopic and articultingboom lifts

52 (Articulating) telescopic boom lifts (self-propelled) Haulotte Star Haulotte Star 10 Max working height (m) 10.0 Max platform height (m) 8.0 Max lateral outreach (m) 3.1 Max up-and-over clearance (m) 7.0 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) 130 Platform rotation (degrees) - Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.0 x 0.7 Lifting capacity (kg) 200 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 0.99 Height - retracted (m) 2.0 Length - retracted (m) 2.6 Unladen weight (kg) 2,540 Turning radius outside (m) VDC Ground clearance (cm) 10 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle - Day 225 Week 575 Ideal in limited space Electric drive motors 55

53 (Articulating) telescopic boom lifts (self-propelled) JLG E 300 AJP 10.9 JLG E 300 AJP Max working height (m) 10.9 Max platform height (m) 8.9 Max lateral outreach (m) 6.1 Max up-and-over clearance (m) 4.0 Turntable rotation (degrees) 350 Jib rotation (vertical; degrees) 144 Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.2 x 0.8 Lifting capacity (kg) 230 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.22 Height - retracted (m) 2.0 Length - retracted (m) 5.7 Unladen weight (kg) 7,100 Turning radius outside (m) VDC Ground clearance (cm) 10 Gradeability (%) 25 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 4.8 Oscillating axle - Day 295 Week 675 Only 122 cm wide 56

54 (Articulating) telescopic boom lifts (self-propelled) Genie Z33/18 MP 12.0 Genie Z33/18 MP Max working height (m) 12.0 Max platform height (m) 10.0 Max lateral outreach (m) 5.6 Max up-and-over clearance (m) 5.6 Turntable rotation (degrees) 400 Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.2 x 0.8 Lifting capacity (kg) 200 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 1.50 Height - retracted (m) 2.0 Length - retracted (m) 4.2 Unladen weight (kg) 3,671 Turning radius outside (m) VDC Ground clearance (cm) 15 Gradeability (%) 45 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle - Day 275 Week 655 No front swing Big horizontal outreach Low unladen weight 57

55 (Articulating) telescopic boom lifts (self-propelled) JLG 340 AJ 12.3 JLG 340 AJ Max working height (m) 12.3 Max platform height (m) 10.3 Max lateral outreach (m) 6.0 Max up-and-over clearance (m) 5.2 Turntable rotation (degrees) 355 Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.2 x 0.7 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 1.93 Height - retracted (m) 2.0 Length - retracted (m) 3.9 Unladen weight (kg) 4,450 Turning radius outside (m) 3.9 diesel Ground clearance (cm) 24 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 8 Oscillating axle Day 315 Week 725 Soot filter Good traction on rough terrain Generator 58

56 (Articulating) telescopic boom lifts (self-propelled) Genie Z 34/22 N 12.5 Genie Z 34/22 N Max working height (m) 12.5 Max platform height (m) 10.5 Max lateral outreach (m) 6.8 Max up-and-over clearance (m) 4.6 Turntable rotation (degrees) 355 Jib rotation (vertical; degrees) 147 Platform rotation (degrees) 160 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.4 x 0.8 Lifting capacity (kg) 227 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.50 Height - retracted (m) 2.0 Length - retracted (m) 4.2 Unladen weight (kg) 5,200 Turning radius outside (m) VDC Ground clearance (cm) 14 Gradeability (%) 20 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle - Day 275 Week 670 No front swing 59

57 (Articulating) telescopic boom lifts (self-propelled) Genie Z 34/22 RT 12.6 Genie Z 34/22 RT Max working height (m) 12.6 Max platform height (m) 10.6 Max lateral outreach (m) 6.8 Max up-and-over clearance (m) 4.6 Turntable rotation (degrees) 355 Jib rotation (vertical; degrees) 144 Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.4 x 0.8 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 1.85 Height - retracted (m) 2.1 Length - retracted (m) 4.1 Unladen weight (kg) 4,750 Turning radius outside (m) 4.1 diesel Ground clearance (cm) 17 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle - Day 315 Week 725 Generator 60

58 (Articulating) telescopic boom lifts (self-propelled) Genie Z 40/23 N RJ 14.3 Genie Z 40/23 N RJ Max working height (m) 14.3 Max platform height (m) 12.3 Max lateral outreach (m) 6.9 Max up-and-over clearance (m) 6.5 Turntable rotation (degrees) 355 Jib rotation (vertical; degrees) 130 Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.2 x 0.8 Lifting capacity (kg) 227 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.50 Height - retracted (m) 2.0 Length - retracted (m) 6.5 Unladen weight (kg) 6,940 Turning radius outside (m) VDC Ground clearance (cm) 18 Gradeability (%) 30 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 7 Oscillating axle - Day 325 Week 795 Jib also swings horizontally (180 degrees) 61

59 (Articulating) telescopic boom lifts (self-propelled) JLG E 450 AJ 15.7 JLG E 450 AJ Max working height (m) 15.7 Max platform height (m) 13.7 Max lateral outreach (m) 7.2 Max up-and-over clearance (m) 7.7 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.5 x 0.7 Lifting capacity (kg) 230 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.75 Height - retracted (m) 2.0 Length - retracted (m) 6.4 Unladen weight (kg) 6,670 Turning radius outside (m) VDC Ground clearance (cm) 22 Gradeability (%) 30 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle - Day 335 Week

60 (Articulating) telescopic boom lifts (self-propelled) JLG 450 AJ SII 15.7 JLG 450 AJ SII Max working height (m) 15.7 Max platform height (m) 13.7 Max lateral outreach (m) 7.4 Max up-and-over clearance (m) 7.6 Turntable rotation (degrees) 355 Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.8 x 0.7 Lifting capacity (kg) 230 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.37 Height - retracted (m) 2.2 Length - retracted (m) 6.5 Unladen weight (kg) 6,480 Turning radius outside (m) 4.7 diesel Ground clearance (cm) 30 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 8 Oscillating axle Day 385 Week 895 Soot filter Good traction on rough terrain Generator 63

61 (Articulating) telescopic boom lifts (self-propelled) Genie Z 45/25 J DC 15.8 Genie Z 45/25 J DC Max working height (m) 15.8 Max platform height (m) 13.8 Max lateral outreach (m) 7.6 Max up-and-over clearance (m) 7.1 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) 140 Platform rotation (degrees) 160 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.2 x 0.8 Lifting capacity (kg) 227 Non-marking tyres Wind allowed (max 12 m/s) Transport width (m) 1.80 Height - retracted (m) 2.0 Length - retracted (m) 6.8 Unladen weight (kg) 7,350 Turning radius outside (m) VDC Ground clearance (cm) 18 Gradeability (%) 30 4-wheel drive (or tracks) - 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle - Day 335 Week

62 (Articulating) telescopic boom lifts (self-propelled) Genie Z 45/25 J RT 15.9 Genie Z 45/25 J RT Max working height (m) 15.9 Max platform height (m) 13.9 Max lateral outreach (m) 7.6 Max up-and-over clearance (m) 7.2 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) 140 Platform rotation (degrees) 160 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.5 x 0.8 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.23 Height - retracted (m) 2.1 Length - retracted (m) 6.8 Unladen weight (kg) 6,580 Turning radius outside (m) 4.0 diesel Ground clearance (cm) 33 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 8 Oscillating axle Day 385 Week 895 Good traction on rough terrain Generator 65

63 (Articulating) telescopic boom lifts (self-propelled) JLG 460 SJ 16.0 JLG 460 SJ Max working height (m) 16.0 Max platform height (m) 14.0 Max lateral outreach (m) 12.3 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low 1.14 Tailswing high 1.14 Platform dimensions (L x W; m) 1.8 x 0.7 Lifting capacity (kg) 230 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.35 Height - retracted (m) 2.4 Length - retracted (m) 8.9 Unladen weight (kg) 7,850 Turning radius outside (m) 4.9 diesel Ground clearance (cm) 30 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 8 Oscillating axle Day 385 Week 895 Soot filter Generator 66

64 (Articulating) telescopic boom lifts (self-propelled) Genie Z 51/30 J RT 17.6 Genie Z 51/30 J RT Max working height (m) 17.6 Max platform height (m) 15.6 Max lateral outreach (m) 9.2 Max up-and-over clearance (m) 7.0 Turntable rotation (degrees) 360 Jib rotation (vertical; degrees) 140 Platform rotation (degrees) 160 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.8 x 0.8 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.29 Height - retracted (m) 2.2 Length - retracted (m) 7.5 Unladen weight (kg) 7,200 Turning radius outside (m) 4.5 diesel Ground clearance (cm) 39 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 8 Oscillating axle Day 395 Week 985 Good traction on rough terrain Limited availability with generator 67

65 (Articulating) telescopic boom lifts (self-propelled) JLG 520 AJ 18.0 JLG 520 AJ Max working height (m) 18.0 Max platform height (m) 16.0 Max lateral outreach (m) 10.0 Max up-and-over clearance (m) 7.3 Turntable rotation (degrees) 355 Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 250 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.35 Height - retracted (m) 2.3 Length - retracted (m) 7.8 Unladen weight (kg) 7,985 Turning radius outside (m) 4.8 diesel Ground clearance (cm) 42 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 6.8 Oscillating axle Day 395 Week 985 Generator 68

66 (Articulating) telescopic boom lifts (self-propelled) Genie Z 60/34 RT 20.3 Genie Z 60/34 RT Max working height (m) 20.3 Max platform height (m) 18.3 Max lateral outreach (m) 10.4 Max up-and-over clearance (m) 8.2 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 90 Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.8 x 0.8 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.46 Height - retracted (m) 2.7 Length - retracted (m) 8.2 Unladen weight (kg) 10,200 Turning radius outside (m) 6.0 diesel Ground clearance (cm) 40 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle Day 475 Week 1,135 Generator 69

67 (Articulating) telescopic boom lifts (self-propelled) JLG 600 AJ 20.4 JLG 600 AJ Max working height (m) 20.4 Max platform height (m) 18.4 Max lateral outreach (m) 12.1 Max up-and-over clearance (m) 8.1 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 230 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.49 Height - retracted (m) 2.6 Length - retracted (m) 8.9 Unladen weight (kg) 10,660 Turning radius outside (m) 5.4 diesel Ground clearance (cm) 30 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle Day 475 Week 1,135 Generator 70

68 (Articulating) telescopic boom lifts (self-propelled) Genie S 65 type II 21.8 Genie S 65 type II Max working height (m) 21.8 Max platform height (m) 19.8 Max lateral outreach (m) 17.1 Max up-and-over clearance (m) 3.0 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 135 Platform rotation (degrees) 160 Tailswing low 1.2 Tailswing high 1.2 Platform dimensions (L x W; m) 1.8 x 0.8 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.50 Height - retracted (m) 2.7 Length - retracted (m) 9.4 Unladen weight (kg) 10,100 Turning radius outside (m) 5.7 diesel Ground clearance (cm) 35 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle Day 495 Week 1,175 Good traction on rough terrain Generator 71

69 (Articulating) telescopic boom lifts (self-propelled) JLG 660 SJ 22.3 JLG 660 SJ Max working height (m) 22.3 Max platform height (m) 20.3 Max lateral outreach (m) 17.3 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low 1.1 Tailswing high 1.1 Platform dimensions (L x W; m) 1.8 x 0.9 Lifting capacity (kg) 230 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.49 Height - retracted (m) 2.5 Length - retracted (m) 10.2 Unladen weight (kg) 12,400 Turning radius outside (m) 5.3 diesel Ground clearance (cm) 30 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 6 Oscillating axle Day 495 Week 1,175 Soot filter Generator 72

70 (Articulating) telescopic boom lifts (self-propelled) Haulotte HT 23 RTJ 22.5 Haulotte HT 23 RTJ Max working height (m) 22.5 Max platform height (m) 20.5 Max lateral outreach (m) 18.3/14.3 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 135 Platform rotation (degrees) 180 Tailswing low 1.1 Tailswing high 1.1 Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 230/450 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.47 Height - retracted (m) 2.7 Length - retracted (m) 7.8/10.4 Unladen weight (kg) 13,400 Turning radius outside (m) 6.5 diesel Ground clearance (cm) 34 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 6.5 Oscillating axle Day 575 Week 1,325 Extra lifting capacity Generator 73

71 (Articulating) telescopic boom lifts (self-propelled) JLG 800 AJ 26.4 JLG 800 AJ Max working height (m) 26.4 Max platform height (m) 24.4 Max lateral outreach (m) 15.8 Max up-and-over clearance (m) 9.8 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 130 Platform rotation (degrees) 180 Tailswing low 0.8 Tailswing high - Platform dimensions (L x W; m) 1.8 x 0.9 Lifting capacity (kg) 230 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.44 Height - retracted (m) 3.0 Length - retracted (m) 11.1 Unladen weight (kg) 15,000 Turning radius outside (m) 6.9 diesel Ground clearance (cm) 30 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle Day 765 Week 1,850 Turning radius with 4-wheel steering is 4.4 m Generator 74

72 (Articulating) telescopic boom lifts (self-propelled) Genie Z 80/60 4x4x Genie Z 80/60 4x4x4 Max working height (m) 26.4 Max platform height (m) 24.4 Max lateral outreach (m) 18.3 Max up-and-over clearance (m) 8.8 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 130 Platform rotation (degrees) 160 Tailswing low Tailswing high Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.49 Height - retracted (m) 3 Length - retracted (m) 9.2 Unladen weight (kg) 17,100 Turning radius outside (m) 4.6 diesel Ground clearance (cm) 30 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) Max speed (km/h) 5 Oscillating axle Day 765 Week 1,850 Does not have to stand wide Generator 75

73 (Articulating) telescopic boom lifts (self-propelled) Genie S 85 type II 27.9 Genie S 85 type II Max working height (m) 27.9 Max platform height (m) 25.9 Max lateral outreach (m) 23.3 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 135 Platform rotation (degrees) 160 Tailswing low 1.42 Tailswing high 1.42 Platform dimensions (L x W; m) 1.8 x 0.8 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.50 Height - retracted (m) 2.8 Length - retracted (m) 11.6 Unladen weight (kg) 17,236 Turning radius outside (m) 6.6 diesel Ground clearance (cm) 40 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5.3 Oscillating axle Day 795 Week 1,925 No base extension Generator 76

74 (Articulating) telescopic boom lifts (self-propelled) JLG 860 SJ 28.2 JLG 860 SJ Max working height (m) 28.2 Max platform height (m) 26.2 Max lateral outreach (m) 22.6 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low 1.4 Tailswing high 1.4 Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 230 Non-marking tyres - Wind allowed (max 12 m/s) 12.5 Transport width (m) 2.49 Height - retracted (m) 3.0 Length - retracted (m) 12.1 Unladen weight (kg) 16,490 Turning radius outside (m) 6.8 diesel Ground clearance (cm) 28 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) - Max speed (km/h) 5 Oscillating axle Day 795 Week 1,925 Soot filter Generator 77

75 (Articulating) telescopic boom lifts (self-propelled) Genie S Genie S 125 Max working height (m) 40.1 Max platform height (m) 38.1 Max lateral outreach (m) 24.7 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 135 Platform rotation (degrees) 160 Tailswing low 1.2 Tailswing high 1.2 Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.50 Height - retracted (m) 3.1 Length - retracted (m) 12.2 Unladen weight (kg) 20,250 Turning radius outside (m) 12.0 diesel Ground clearance (cm) 44 Gradeability (%) 40 4-wheel drive (or tracks) 4-wheel steering (or tracks) Max speed (km/h) 5 Oscillating axle Day 1,125 Week 2,975 Working width is 3.35 m (axles extended) Generator 78

76 (Articulating) telescopic boom lifts (self-propelled) Genie Z 135/70 4x4x Genie Z 135/70 4x4x4 Max working height (m) 43.2 Max platform height (m) 41.2 Max lateral outreach (m) 21.3 Max up-and-over clearance (m) 23.0 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 130 Platform rotation (degrees) 160 Tailswing low 4.0 Tailswing high 0.3 Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 272 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.46 Height - retracted (m) 3.1 Length - retracted (m) 12.9 Unladen weight (kg) 20,500 Turning radius outside (m) 5.6 diesel Ground clearance (cm) 51 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) Max speed (km/h) 5 Oscillating axle - Day 1,550 Week 3,650 Working width is 3.94 m Has telescopic jib m Generator 79

77 (Articulating) telescopic boom lifts (self-propelled) JLG 1350 SJP 43.3 JLG 1350 SJP Max working height (m) 43.3 Max platform height (m) 41.3 Max lateral outreach (m) 24.3 Max up-and-over clearance (m) - Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) 180 Platform rotation (degrees) 360 Tailswing low 1.7 Tailswing high 1.7 Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 450/230 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 2.49 Height - retracted (m) 3.1 Length - retracted (m) 14.9 Unladen weight (kg) 20,400 Turning radius outside (m) 6.9/5.9 diesel Ground clearance (cm) 30 Gradeability (%) 45 4-wheel drive (or tracks) 4-wheel steering (or tracks) no Max speed (km/h) 5 Oscillating axle Day 1,500 Week 3,600 Working width is 3.81 m (axles extended) Jib also rotates 180 degrees horizontally Generator 80

78 (Articulating) telescopic boom lifts (self-propelled) JLG 150 HAX 47.7 JLG 150 HAX Max working height (m) 47.7 Max platform height (m) 45.7 Max lateral outreach (m) 24.2 Max up-and-over clearance (m) 24.4 Turntable rotation (degrees) continuous Jib rotation (vertical; degrees) - Platform rotation (degrees) 165 Tailswing low 5.4 Tailswing high - Platform dimensions (L x W; m) 2.4 x 0.9 Lifting capacity (kg) 227 Non-marking tyres - Wind allowed (max 12 m/s) Transport width (m) 3.51 Height - retracted (m) 3.2 Length - retracted (m) 12.7 Unladen weight (kg) 26,000 Turning radius outside (m) 8.2 diesel Ground clearance (cm) 30 Gradeability (%) 30 4-wheel drive (or tracks) 4-wheel steering (or tracks) Max speed (km/h) 4 Oscillating axle - Day 1,800 Week 4,350 Working width is 5.5 m (axles extended) Auxiliary stabilisers for axle extension Transport width is 3.5 m 81

79 82

80 Truck mounted boom lift s

81 Truck mounted boom lifts CMC PLA CMC PLA 2100 Max working height (m) 21.0 Max platform height (m) 19.0 Max lateral outreach (m) 10.0 Max up-and-over clearance (m) - Turntable rotation (degrees) 540 Jib rotation (vertical; degrees) - Platform rotation (degrees) 180 Tailswing low - Tailswing high - Platform dimensions (L x W; m) 1.4 x 0.6 Lifting capacity (kg) 200 Wind allowed (max 12 m/s) Stabiliser dimensions (L x W; m) 3.0 (2.2) Transport width (m) 2.2 Drive through width (m) 2.2 Height - retracted (m) 3.0 Length - retracted (m) 7.8 Unladen weight (kg) 3,500 Working width 3.0 Stabilisers Ground clearance (cm) Self-drive gear Truck motor hydr. N.S. max 120 km/h Day 400 Week 1,400 With 230 V throughput to the basket With 200 bar throughput to the basket 85

82 86

83 Additional Rental